1 /* SPDX-License-Identifier: GPL-2.0 */
2 #ifndef __LINUX_FOTG210_H
3 #define __LINUX_FOTG210_H
4 
5 #include <linux/usb/ehci-dbgp.h>
6 
7 /* definitions used for the EHCI driver */
8 
9 /*
10  * __hc32 and __hc16 are "Host Controller" types, they may be equivalent to
11  * __leXX (normally) or __beXX (given FOTG210_BIG_ENDIAN_DESC), depending on
12  * the host controller implementation.
13  *
14  * To facilitate the strongest possible byte-order checking from "sparse"
15  * and so on, we use __leXX unless that's not practical.
16  */
17 #define __hc32	__le32
18 #define __hc16	__le16
19 
20 /* statistics can be kept for tuning/monitoring */
21 struct fotg210_stats {
22 	/* irq usage */
23 	unsigned long		normal;
24 	unsigned long		error;
25 	unsigned long		iaa;
26 	unsigned long		lost_iaa;
27 
28 	/* termination of urbs from core */
29 	unsigned long		complete;
30 	unsigned long		unlink;
31 };
32 
33 /* fotg210_hcd->lock guards shared data against other CPUs:
34  *   fotg210_hcd:	async, unlink, periodic (and shadow), ...
35  *   usb_host_endpoint: hcpriv
36  *   fotg210_qh:	qh_next, qtd_list
37  *   fotg210_qtd:	qtd_list
38  *
39  * Also, hold this lock when talking to HC registers or
40  * when updating hw_* fields in shared qh/qtd/... structures.
41  */
42 
43 #define	FOTG210_MAX_ROOT_PORTS	1		/* see HCS_N_PORTS */
44 
45 /*
46  * fotg210_rh_state values of FOTG210_RH_RUNNING or above mean that the
47  * controller may be doing DMA.  Lower values mean there's no DMA.
48  */
49 enum fotg210_rh_state {
50 	FOTG210_RH_HALTED,
51 	FOTG210_RH_SUSPENDED,
52 	FOTG210_RH_RUNNING,
53 	FOTG210_RH_STOPPING
54 };
55 
56 /*
57  * Timer events, ordered by increasing delay length.
58  * Always update event_delays_ns[] and event_handlers[] (defined in
59  * ehci-timer.c) in parallel with this list.
60  */
61 enum fotg210_hrtimer_event {
62 	FOTG210_HRTIMER_POLL_ASS,	/* Poll for async schedule off */
63 	FOTG210_HRTIMER_POLL_PSS,	/* Poll for periodic schedule off */
64 	FOTG210_HRTIMER_POLL_DEAD,	/* Wait for dead controller to stop */
65 	FOTG210_HRTIMER_UNLINK_INTR,	/* Wait for interrupt QH unlink */
66 	FOTG210_HRTIMER_FREE_ITDS,	/* Wait for unused iTDs and siTDs */
67 	FOTG210_HRTIMER_ASYNC_UNLINKS,	/* Unlink empty async QHs */
68 	FOTG210_HRTIMER_IAA_WATCHDOG,	/* Handle lost IAA interrupts */
69 	FOTG210_HRTIMER_DISABLE_PERIODIC, /* Wait to disable periodic sched */
70 	FOTG210_HRTIMER_DISABLE_ASYNC,	/* Wait to disable async sched */
71 	FOTG210_HRTIMER_IO_WATCHDOG,	/* Check for missing IRQs */
72 	FOTG210_HRTIMER_NUM_EVENTS	/* Must come last */
73 };
74 #define FOTG210_HRTIMER_NO_EVENT	99
75 
76 struct fotg210_hcd {			/* one per controller */
77 	/* timing support */
78 	enum fotg210_hrtimer_event	next_hrtimer_event;
79 	unsigned		enabled_hrtimer_events;
80 	ktime_t			hr_timeouts[FOTG210_HRTIMER_NUM_EVENTS];
81 	struct hrtimer		hrtimer;
82 
83 	int			PSS_poll_count;
84 	int			ASS_poll_count;
85 	int			died_poll_count;
86 
87 	/* glue to PCI and HCD framework */
88 	struct fotg210_caps __iomem *caps;
89 	struct fotg210_regs __iomem *regs;
90 	struct ehci_dbg_port __iomem *debug;
91 
92 	__u32			hcs_params;	/* cached register copy */
93 	spinlock_t		lock;
94 	enum fotg210_rh_state	rh_state;
95 
96 	/* general schedule support */
97 	bool			scanning:1;
98 	bool			need_rescan:1;
99 	bool			intr_unlinking:1;
100 	bool			async_unlinking:1;
101 	bool			shutdown:1;
102 	struct fotg210_qh		*qh_scan_next;
103 
104 	/* async schedule support */
105 	struct fotg210_qh		*async;
106 	struct fotg210_qh		*dummy;		/* For AMD quirk use */
107 	struct fotg210_qh		*async_unlink;
108 	struct fotg210_qh		*async_unlink_last;
109 	struct fotg210_qh		*async_iaa;
110 	unsigned		async_unlink_cycle;
111 	unsigned		async_count;	/* async activity count */
112 
113 	/* periodic schedule support */
114 #define	DEFAULT_I_TDPS		1024		/* some HCs can do less */
115 	unsigned		periodic_size;
116 	__hc32			*periodic;	/* hw periodic table */
117 	dma_addr_t		periodic_dma;
118 	struct list_head	intr_qh_list;
119 	unsigned		i_thresh;	/* uframes HC might cache */
120 
121 	union fotg210_shadow	*pshadow;	/* mirror hw periodic table */
122 	struct fotg210_qh		*intr_unlink;
123 	struct fotg210_qh		*intr_unlink_last;
124 	unsigned		intr_unlink_cycle;
125 	unsigned		now_frame;	/* frame from HC hardware */
126 	unsigned		next_frame;	/* scan periodic, start here */
127 	unsigned		intr_count;	/* intr activity count */
128 	unsigned		isoc_count;	/* isoc activity count */
129 	unsigned		periodic_count;	/* periodic activity count */
130 	/* max periodic time per uframe */
131 	unsigned		uframe_periodic_max;
132 
133 
134 	/* list of itds completed while now_frame was still active */
135 	struct list_head	cached_itd_list;
136 	struct fotg210_itd	*last_itd_to_free;
137 
138 	/* per root hub port */
139 	unsigned long		reset_done[FOTG210_MAX_ROOT_PORTS];
140 
141 	/* bit vectors (one bit per port)
142 	 * which ports were already suspended at the start of a bus suspend
143 	 */
144 	unsigned long		bus_suspended;
145 
146 	/* which ports are edicated to the companion controller */
147 	unsigned long		companion_ports;
148 
149 	/* which ports are owned by the companion during a bus suspend */
150 	unsigned long		owned_ports;
151 
152 	/* which ports have the change-suspend feature turned on */
153 	unsigned long		port_c_suspend;
154 
155 	/* which ports are suspended */
156 	unsigned long		suspended_ports;
157 
158 	/* which ports have started to resume */
159 	unsigned long		resuming_ports;
160 
161 	/* per-HC memory pools (could be per-bus, but ...) */
162 	struct dma_pool		*qh_pool;	/* qh per active urb */
163 	struct dma_pool		*qtd_pool;	/* one or more per qh */
164 	struct dma_pool		*itd_pool;	/* itd per iso urb */
165 
166 	unsigned		random_frame;
167 	unsigned long		next_statechange;
168 	ktime_t			last_periodic_enable;
169 	u32			command;
170 
171 	/* SILICON QUIRKS */
172 	unsigned		need_io_watchdog:1;
173 	unsigned		fs_i_thresh:1;	/* Intel iso scheduling */
174 
175 	u8			sbrn;		/* packed release number */
176 
177 	/* irq statistics */
178 #ifdef FOTG210_STATS
179 	struct fotg210_stats	stats;
180 #	define INCR(x) ((x)++)
181 #else
182 #	define INCR(x) do {} while (0)
183 #endif
184 
185 	/* silicon clock */
186 	struct clk		*pclk;
187 
188 	/* debug files */
189 	struct dentry		*debug_dir;
190 };
191 
192 /* convert between an HCD pointer and the corresponding FOTG210_HCD */
hcd_to_fotg210(struct usb_hcd * hcd)193 static inline struct fotg210_hcd *hcd_to_fotg210(struct usb_hcd *hcd)
194 {
195 	return (struct fotg210_hcd *)(hcd->hcd_priv);
196 }
fotg210_to_hcd(struct fotg210_hcd * fotg210)197 static inline struct usb_hcd *fotg210_to_hcd(struct fotg210_hcd *fotg210)
198 {
199 	return container_of((void *) fotg210, struct usb_hcd, hcd_priv);
200 }
201 
202 /*-------------------------------------------------------------------------*/
203 
204 /* EHCI register interface, corresponds to EHCI Revision 0.95 specification */
205 
206 /* Section 2.2 Host Controller Capability Registers */
207 struct fotg210_caps {
208 	/* these fields are specified as 8 and 16 bit registers,
209 	 * but some hosts can't perform 8 or 16 bit PCI accesses.
210 	 * some hosts treat caplength and hciversion as parts of a 32-bit
211 	 * register, others treat them as two separate registers, this
212 	 * affects the memory map for big endian controllers.
213 	 */
214 	u32		hc_capbase;
215 #define HC_LENGTH(fotg210, p)	(0x00ff&((p) >> /* bits 7:0 / offset 00h */ \
216 				(fotg210_big_endian_capbase(fotg210) ? 24 : 0)))
217 #define HC_VERSION(fotg210, p)	(0xffff&((p) >> /* bits 31:16 / offset 02h */ \
218 				(fotg210_big_endian_capbase(fotg210) ? 0 : 16)))
219 	u32		hcs_params;     /* HCSPARAMS - offset 0x4 */
220 #define HCS_N_PORTS(p)		(((p)>>0)&0xf)	/* bits 3:0, ports on HC */
221 
222 	u32		hcc_params;	/* HCCPARAMS - offset 0x8 */
223 #define HCC_CANPARK(p)		((p)&(1 << 2))  /* true: can park on async qh */
224 #define HCC_PGM_FRAMELISTLEN(p) ((p)&(1 << 1))  /* true: periodic_size changes*/
225 	u8		portroute[8];	 /* nibbles for routing - offset 0xC */
226 };
227 
228 
229 /* Section 2.3 Host Controller Operational Registers */
230 struct fotg210_regs {
231 
232 	/* USBCMD: offset 0x00 */
233 	u32		command;
234 
235 /* EHCI 1.1 addendum */
236 /* 23:16 is r/w intr rate, in microframes; default "8" == 1/msec */
237 #define CMD_PARK	(1<<11)		/* enable "park" on async qh */
238 #define CMD_PARK_CNT(c)	(((c)>>8)&3)	/* how many transfers to park for */
239 #define CMD_IAAD	(1<<6)		/* "doorbell" interrupt async advance */
240 #define CMD_ASE		(1<<5)		/* async schedule enable */
241 #define CMD_PSE		(1<<4)		/* periodic schedule enable */
242 /* 3:2 is periodic frame list size */
243 #define CMD_RESET	(1<<1)		/* reset HC not bus */
244 #define CMD_RUN		(1<<0)		/* start/stop HC */
245 
246 	/* USBSTS: offset 0x04 */
247 	u32		status;
248 #define STS_ASS		(1<<15)		/* Async Schedule Status */
249 #define STS_PSS		(1<<14)		/* Periodic Schedule Status */
250 #define STS_RECL	(1<<13)		/* Reclamation */
251 #define STS_HALT	(1<<12)		/* Not running (any reason) */
252 /* some bits reserved */
253 	/* these STS_* flags are also intr_enable bits (USBINTR) */
254 #define STS_IAA		(1<<5)		/* Interrupted on async advance */
255 #define STS_FATAL	(1<<4)		/* such as some PCI access errors */
256 #define STS_FLR		(1<<3)		/* frame list rolled over */
257 #define STS_PCD		(1<<2)		/* port change detect */
258 #define STS_ERR		(1<<1)		/* "error" completion (overflow, ...) */
259 #define STS_INT		(1<<0)		/* "normal" completion (short, ...) */
260 
261 	/* USBINTR: offset 0x08 */
262 	u32		intr_enable;
263 
264 	/* FRINDEX: offset 0x0C */
265 	u32		frame_index;	/* current microframe number */
266 	/* CTRLDSSEGMENT: offset 0x10 */
267 	u32		segment;	/* address bits 63:32 if needed */
268 	/* PERIODICLISTBASE: offset 0x14 */
269 	u32		frame_list;	/* points to periodic list */
270 	/* ASYNCLISTADDR: offset 0x18 */
271 	u32		async_next;	/* address of next async queue head */
272 
273 	u32	reserved1;
274 	/* PORTSC: offset 0x20 */
275 	u32	port_status;
276 /* 31:23 reserved */
277 #define PORT_USB11(x) (((x)&(3<<10)) == (1<<10))	/* USB 1.1 device */
278 #define PORT_RESET	(1<<8)		/* reset port */
279 #define PORT_SUSPEND	(1<<7)		/* suspend port */
280 #define PORT_RESUME	(1<<6)		/* resume it */
281 #define PORT_PEC	(1<<3)		/* port enable change */
282 #define PORT_PE		(1<<2)		/* port enable */
283 #define PORT_CSC	(1<<1)		/* connect status change */
284 #define PORT_CONNECT	(1<<0)		/* device connected */
285 #define PORT_RWC_BITS   (PORT_CSC | PORT_PEC)
286 	u32     reserved2[19];
287 
288 	/* OTGCSR: offet 0x70 */
289 	u32     otgcsr;
290 #define OTGCSR_HOST_SPD_TYP     (3 << 22)
291 #define OTGCSR_A_BUS_DROP	(1 << 5)
292 #define OTGCSR_A_BUS_REQ	(1 << 4)
293 
294 	/* OTGISR: offset 0x74 */
295 	u32     otgisr;
296 #define OTGISR_OVC	(1 << 10)
297 
298 	u32     reserved3[15];
299 
300 	/* GMIR: offset 0xB4 */
301 	u32     gmir;
302 #define GMIR_INT_POLARITY	(1 << 3) /*Active High*/
303 #define GMIR_MHC_INT		(1 << 2)
304 #define GMIR_MOTG_INT		(1 << 1)
305 #define GMIR_MDEV_INT	(1 << 0)
306 };
307 
308 /*-------------------------------------------------------------------------*/
309 
310 #define	QTD_NEXT(fotg210, dma)	cpu_to_hc32(fotg210, (u32)dma)
311 
312 /*
313  * EHCI Specification 0.95 Section 3.5
314  * QTD: describe data transfer components (buffer, direction, ...)
315  * See Fig 3-6 "Queue Element Transfer Descriptor Block Diagram".
316  *
317  * These are associated only with "QH" (Queue Head) structures,
318  * used with control, bulk, and interrupt transfers.
319  */
320 struct fotg210_qtd {
321 	/* first part defined by EHCI spec */
322 	__hc32			hw_next;	/* see EHCI 3.5.1 */
323 	__hc32			hw_alt_next;    /* see EHCI 3.5.2 */
324 	__hc32			hw_token;	/* see EHCI 3.5.3 */
325 #define	QTD_TOGGLE	(1 << 31)	/* data toggle */
326 #define	QTD_LENGTH(tok)	(((tok)>>16) & 0x7fff)
327 #define	QTD_IOC		(1 << 15)	/* interrupt on complete */
328 #define	QTD_CERR(tok)	(((tok)>>10) & 0x3)
329 #define	QTD_PID(tok)	(((tok)>>8) & 0x3)
330 #define	QTD_STS_ACTIVE	(1 << 7)	/* HC may execute this */
331 #define	QTD_STS_HALT	(1 << 6)	/* halted on error */
332 #define	QTD_STS_DBE	(1 << 5)	/* data buffer error (in HC) */
333 #define	QTD_STS_BABBLE	(1 << 4)	/* device was babbling (qtd halted) */
334 #define	QTD_STS_XACT	(1 << 3)	/* device gave illegal response */
335 #define	QTD_STS_MMF	(1 << 2)	/* incomplete split transaction */
336 #define	QTD_STS_STS	(1 << 1)	/* split transaction state */
337 #define	QTD_STS_PING	(1 << 0)	/* issue PING? */
338 
339 #define ACTIVE_BIT(fotg210)	cpu_to_hc32(fotg210, QTD_STS_ACTIVE)
340 #define HALT_BIT(fotg210)		cpu_to_hc32(fotg210, QTD_STS_HALT)
341 #define STATUS_BIT(fotg210)	cpu_to_hc32(fotg210, QTD_STS_STS)
342 
343 	__hc32			hw_buf[5];	/* see EHCI 3.5.4 */
344 	__hc32			hw_buf_hi[5];	/* Appendix B */
345 
346 	/* the rest is HCD-private */
347 	dma_addr_t		qtd_dma;		/* qtd address */
348 	struct list_head	qtd_list;		/* sw qtd list */
349 	struct urb		*urb;			/* qtd's urb */
350 	size_t			length;			/* length of buffer */
351 } __aligned(32);
352 
353 /* mask NakCnt+T in qh->hw_alt_next */
354 #define QTD_MASK(fotg210)	cpu_to_hc32(fotg210, ~0x1f)
355 
356 #define IS_SHORT_READ(token) (QTD_LENGTH(token) != 0 && QTD_PID(token) == 1)
357 
358 /*-------------------------------------------------------------------------*/
359 
360 /* type tag from {qh,itd,fstn}->hw_next */
361 #define Q_NEXT_TYPE(fotg210, dma)	((dma) & cpu_to_hc32(fotg210, 3 << 1))
362 
363 /*
364  * Now the following defines are not converted using the
365  * cpu_to_le32() macro anymore, since we have to support
366  * "dynamic" switching between be and le support, so that the driver
367  * can be used on one system with SoC EHCI controller using big-endian
368  * descriptors as well as a normal little-endian PCI EHCI controller.
369  */
370 /* values for that type tag */
371 #define Q_TYPE_ITD	(0 << 1)
372 #define Q_TYPE_QH	(1 << 1)
373 #define Q_TYPE_SITD	(2 << 1)
374 #define Q_TYPE_FSTN	(3 << 1)
375 
376 /* next async queue entry, or pointer to interrupt/periodic QH */
377 #define QH_NEXT(fotg210, dma) \
378 	(cpu_to_hc32(fotg210, (((u32)dma)&~0x01f)|Q_TYPE_QH))
379 
380 /* for periodic/async schedules and qtd lists, mark end of list */
381 #define FOTG210_LIST_END(fotg210) \
382 	cpu_to_hc32(fotg210, 1) /* "null pointer" to hw */
383 
384 /*
385  * Entries in periodic shadow table are pointers to one of four kinds
386  * of data structure.  That's dictated by the hardware; a type tag is
387  * encoded in the low bits of the hardware's periodic schedule.  Use
388  * Q_NEXT_TYPE to get the tag.
389  *
390  * For entries in the async schedule, the type tag always says "qh".
391  */
392 union fotg210_shadow {
393 	struct fotg210_qh	*qh;		/* Q_TYPE_QH */
394 	struct fotg210_itd	*itd;		/* Q_TYPE_ITD */
395 	struct fotg210_fstn	*fstn;		/* Q_TYPE_FSTN */
396 	__hc32			*hw_next;	/* (all types) */
397 	void			*ptr;
398 };
399 
400 /*-------------------------------------------------------------------------*/
401 
402 /*
403  * EHCI Specification 0.95 Section 3.6
404  * QH: describes control/bulk/interrupt endpoints
405  * See Fig 3-7 "Queue Head Structure Layout".
406  *
407  * These appear in both the async and (for interrupt) periodic schedules.
408  */
409 
410 /* first part defined by EHCI spec */
411 struct fotg210_qh_hw {
412 	__hc32			hw_next;	/* see EHCI 3.6.1 */
413 	__hc32			hw_info1;	/* see EHCI 3.6.2 */
414 #define	QH_CONTROL_EP	(1 << 27)	/* FS/LS control endpoint */
415 #define	QH_HEAD		(1 << 15)	/* Head of async reclamation list */
416 #define	QH_TOGGLE_CTL	(1 << 14)	/* Data toggle control */
417 #define	QH_HIGH_SPEED	(2 << 12)	/* Endpoint speed */
418 #define	QH_LOW_SPEED	(1 << 12)
419 #define	QH_FULL_SPEED	(0 << 12)
420 #define	QH_INACTIVATE	(1 << 7)	/* Inactivate on next transaction */
421 	__hc32			hw_info2;	/* see EHCI 3.6.2 */
422 #define	QH_SMASK	0x000000ff
423 #define	QH_CMASK	0x0000ff00
424 #define	QH_HUBADDR	0x007f0000
425 #define	QH_HUBPORT	0x3f800000
426 #define	QH_MULT		0xc0000000
427 	__hc32			hw_current;	/* qtd list - see EHCI 3.6.4 */
428 
429 	/* qtd overlay (hardware parts of a struct fotg210_qtd) */
430 	__hc32			hw_qtd_next;
431 	__hc32			hw_alt_next;
432 	__hc32			hw_token;
433 	__hc32			hw_buf[5];
434 	__hc32			hw_buf_hi[5];
435 } __aligned(32);
436 
437 struct fotg210_qh {
438 	struct fotg210_qh_hw	*hw;		/* Must come first */
439 	/* the rest is HCD-private */
440 	dma_addr_t		qh_dma;		/* address of qh */
441 	union fotg210_shadow	qh_next;	/* ptr to qh; or periodic */
442 	struct list_head	qtd_list;	/* sw qtd list */
443 	struct list_head	intr_node;	/* list of intr QHs */
444 	struct fotg210_qtd	*dummy;
445 	struct fotg210_qh	*unlink_next;	/* next on unlink list */
446 
447 	unsigned		unlink_cycle;
448 
449 	u8			needs_rescan;	/* Dequeue during giveback */
450 	u8			qh_state;
451 #define	QH_STATE_LINKED		1		/* HC sees this */
452 #define	QH_STATE_UNLINK		2		/* HC may still see this */
453 #define	QH_STATE_IDLE		3		/* HC doesn't see this */
454 #define	QH_STATE_UNLINK_WAIT	4		/* LINKED and on unlink q */
455 #define	QH_STATE_COMPLETING	5		/* don't touch token.HALT */
456 
457 	u8			xacterrs;	/* XactErr retry counter */
458 #define	QH_XACTERR_MAX		32		/* XactErr retry limit */
459 
460 	/* periodic schedule info */
461 	u8			usecs;		/* intr bandwidth */
462 	u8			gap_uf;		/* uframes split/csplit gap */
463 	u8			c_usecs;	/* ... split completion bw */
464 	u16			tt_usecs;	/* tt downstream bandwidth */
465 	unsigned short		period;		/* polling interval */
466 	unsigned short		start;		/* where polling starts */
467 #define NO_FRAME ((unsigned short)~0)			/* pick new start */
468 
469 	struct usb_device	*dev;		/* access to TT */
470 	unsigned		is_out:1;	/* bulk or intr OUT */
471 	unsigned		clearing_tt:1;	/* Clear-TT-Buf in progress */
472 };
473 
474 /*-------------------------------------------------------------------------*/
475 
476 /* description of one iso transaction (up to 3 KB data if highspeed) */
477 struct fotg210_iso_packet {
478 	/* These will be copied to iTD when scheduling */
479 	u64			bufp;		/* itd->hw_bufp{,_hi}[pg] |= */
480 	__hc32			transaction;	/* itd->hw_transaction[i] |= */
481 	u8			cross;		/* buf crosses pages */
482 	/* for full speed OUT splits */
483 	u32			buf1;
484 };
485 
486 /* temporary schedule data for packets from iso urbs (both speeds)
487  * each packet is one logical usb transaction to the device (not TT),
488  * beginning at stream->next_uframe
489  */
490 struct fotg210_iso_sched {
491 	struct list_head	td_list;
492 	unsigned		span;
493 	struct fotg210_iso_packet	packet[];
494 };
495 
496 /*
497  * fotg210_iso_stream - groups all (s)itds for this endpoint.
498  * acts like a qh would, if EHCI had them for ISO.
499  */
500 struct fotg210_iso_stream {
501 	/* first field matches fotg210_hq, but is NULL */
502 	struct fotg210_qh_hw	*hw;
503 
504 	u8			bEndpointAddress;
505 	u8			highspeed;
506 	struct list_head	td_list;	/* queued itds */
507 	struct list_head	free_list;	/* list of unused itds */
508 	struct usb_device	*udev;
509 	struct usb_host_endpoint *ep;
510 
511 	/* output of (re)scheduling */
512 	int			next_uframe;
513 	__hc32			splits;
514 
515 	/* the rest is derived from the endpoint descriptor,
516 	 * trusting urb->interval == f(epdesc->bInterval) and
517 	 * including the extra info for hw_bufp[0..2]
518 	 */
519 	u8			usecs, c_usecs;
520 	u16			interval;
521 	u16			tt_usecs;
522 	u16			maxp;
523 	u16			raw_mask;
524 	unsigned		bandwidth;
525 
526 	/* This is used to initialize iTD's hw_bufp fields */
527 	__hc32			buf0;
528 	__hc32			buf1;
529 	__hc32			buf2;
530 
531 	/* this is used to initialize sITD's tt info */
532 	__hc32			address;
533 };
534 
535 /*-------------------------------------------------------------------------*/
536 
537 /*
538  * EHCI Specification 0.95 Section 3.3
539  * Fig 3-4 "Isochronous Transaction Descriptor (iTD)"
540  *
541  * Schedule records for high speed iso xfers
542  */
543 struct fotg210_itd {
544 	/* first part defined by EHCI spec */
545 	__hc32			hw_next;	/* see EHCI 3.3.1 */
546 	__hc32			hw_transaction[8]; /* see EHCI 3.3.2 */
547 #define FOTG210_ISOC_ACTIVE	(1<<31)	/* activate transfer this slot */
548 #define FOTG210_ISOC_BUF_ERR	(1<<30)	/* Data buffer error */
549 #define FOTG210_ISOC_BABBLE	(1<<29)	/* babble detected */
550 #define FOTG210_ISOC_XACTERR	(1<<28)	/* XactErr - transaction error */
551 #define	FOTG210_ITD_LENGTH(tok)	(((tok)>>16) & 0x0fff)
552 #define	FOTG210_ITD_IOC		(1 << 15)	/* interrupt on complete */
553 
554 #define ITD_ACTIVE(fotg210)	cpu_to_hc32(fotg210, FOTG210_ISOC_ACTIVE)
555 
556 	__hc32			hw_bufp[7];	/* see EHCI 3.3.3 */
557 	__hc32			hw_bufp_hi[7];	/* Appendix B */
558 
559 	/* the rest is HCD-private */
560 	dma_addr_t		itd_dma;	/* for this itd */
561 	union fotg210_shadow	itd_next;	/* ptr to periodic q entry */
562 
563 	struct urb		*urb;
564 	struct fotg210_iso_stream	*stream;	/* endpoint's queue */
565 	struct list_head	itd_list;	/* list of stream's itds */
566 
567 	/* any/all hw_transactions here may be used by that urb */
568 	unsigned		frame;		/* where scheduled */
569 	unsigned		pg;
570 	unsigned		index[8];	/* in urb->iso_frame_desc */
571 } __aligned(32);
572 
573 /*-------------------------------------------------------------------------*/
574 
575 /*
576  * EHCI Specification 0.96 Section 3.7
577  * Periodic Frame Span Traversal Node (FSTN)
578  *
579  * Manages split interrupt transactions (using TT) that span frame boundaries
580  * into uframes 0/1; see 4.12.2.2.  In those uframes, a "save place" FSTN
581  * makes the HC jump (back) to a QH to scan for fs/ls QH completions until
582  * it hits a "restore" FSTN; then it returns to finish other uframe 0/1 work.
583  */
584 struct fotg210_fstn {
585 	__hc32			hw_next;	/* any periodic q entry */
586 	__hc32			hw_prev;	/* qh or FOTG210_LIST_END */
587 
588 	/* the rest is HCD-private */
589 	dma_addr_t		fstn_dma;
590 	union fotg210_shadow	fstn_next;	/* ptr to periodic q entry */
591 } __aligned(32);
592 
593 /*-------------------------------------------------------------------------*/
594 
595 /* Prepare the PORTSC wakeup flags during controller suspend/resume */
596 
597 #define fotg210_prepare_ports_for_controller_suspend(fotg210, do_wakeup) \
598 		fotg210_adjust_port_wakeup_flags(fotg210, true, do_wakeup)
599 
600 #define fotg210_prepare_ports_for_controller_resume(fotg210)		\
601 		fotg210_adjust_port_wakeup_flags(fotg210, false, false)
602 
603 /*-------------------------------------------------------------------------*/
604 
605 /*
606  * Some EHCI controllers have a Transaction Translator built into the
607  * root hub. This is a non-standard feature.  Each controller will need
608  * to add code to the following inline functions, and call them as
609  * needed (mostly in root hub code).
610  */
611 
612 static inline unsigned int
fotg210_get_speed(struct fotg210_hcd * fotg210,unsigned int portsc)613 fotg210_get_speed(struct fotg210_hcd *fotg210, unsigned int portsc)
614 {
615 	return (readl(&fotg210->regs->otgcsr)
616 		& OTGCSR_HOST_SPD_TYP) >> 22;
617 }
618 
619 /* Returns the speed of a device attached to a port on the root hub. */
620 static inline unsigned int
fotg210_port_speed(struct fotg210_hcd * fotg210,unsigned int portsc)621 fotg210_port_speed(struct fotg210_hcd *fotg210, unsigned int portsc)
622 {
623 	switch (fotg210_get_speed(fotg210, portsc)) {
624 	case 0:
625 		return 0;
626 	case 1:
627 		return USB_PORT_STAT_LOW_SPEED;
628 	case 2:
629 	default:
630 		return USB_PORT_STAT_HIGH_SPEED;
631 	}
632 }
633 
634 /*-------------------------------------------------------------------------*/
635 
636 #define	fotg210_has_fsl_portno_bug(e)		(0)
637 
638 /*
639  * While most USB host controllers implement their registers in
640  * little-endian format, a minority (celleb companion chip) implement
641  * them in big endian format.
642  *
643  * This attempts to support either format at compile time without a
644  * runtime penalty, or both formats with the additional overhead
645  * of checking a flag bit.
646  *
647  */
648 
649 #define fotg210_big_endian_mmio(e)	0
650 #define fotg210_big_endian_capbase(e)	0
651 
fotg210_readl(const struct fotg210_hcd * fotg210,__u32 __iomem * regs)652 static inline unsigned int fotg210_readl(const struct fotg210_hcd *fotg210,
653 		__u32 __iomem *regs)
654 {
655 	return readl(regs);
656 }
657 
fotg210_writel(const struct fotg210_hcd * fotg210,const unsigned int val,__u32 __iomem * regs)658 static inline void fotg210_writel(const struct fotg210_hcd *fotg210,
659 		const unsigned int val, __u32 __iomem *regs)
660 {
661 	writel(val, regs);
662 }
663 
664 /* cpu to fotg210 */
cpu_to_hc32(const struct fotg210_hcd * fotg210,const u32 x)665 static inline __hc32 cpu_to_hc32(const struct fotg210_hcd *fotg210, const u32 x)
666 {
667 	return cpu_to_le32(x);
668 }
669 
670 /* fotg210 to cpu */
hc32_to_cpu(const struct fotg210_hcd * fotg210,const __hc32 x)671 static inline u32 hc32_to_cpu(const struct fotg210_hcd *fotg210, const __hc32 x)
672 {
673 	return le32_to_cpu(x);
674 }
675 
hc32_to_cpup(const struct fotg210_hcd * fotg210,const __hc32 * x)676 static inline u32 hc32_to_cpup(const struct fotg210_hcd *fotg210,
677 			       const __hc32 *x)
678 {
679 	return le32_to_cpup(x);
680 }
681 
682 /*-------------------------------------------------------------------------*/
683 
fotg210_read_frame_index(struct fotg210_hcd * fotg210)684 static inline unsigned fotg210_read_frame_index(struct fotg210_hcd *fotg210)
685 {
686 	return fotg210_readl(fotg210, &fotg210->regs->frame_index);
687 }
688 
689 #define fotg210_itdlen(urb, desc, t) ({			\
690 	usb_pipein((urb)->pipe) ?				\
691 	(desc)->length - FOTG210_ITD_LENGTH(t) :			\
692 	FOTG210_ITD_LENGTH(t);					\
693 })
694 /*-------------------------------------------------------------------------*/
695 
696 #endif /* __LINUX_FOTG210_H */
697