1Installation Instructions 2************************* 3 4Copyright (C) 1994-1996, 1999-2002, 2004-2013 Free Software Foundation, 5Inc. 6 7 Copying and distribution of this file, with or without modification, 8are permitted in any medium without royalty provided the copyright 9notice and this notice are preserved. This file is offered as-is, 10without warranty of any kind. 11 12Basic Installation 13================== 14 15 Briefly, the shell commands `./configure; make; make install' should 16configure, build, and install this package. The following 17more-detailed instructions are generic; see the `README' file for 18instructions specific to this package. Some packages provide this 19`INSTALL' file but do not implement all of the features documented 20below. The lack of an optional feature in a given package is not 21necessarily a bug. More recommendations for GNU packages can be found 22in *note Makefile Conventions: (standards)Makefile Conventions. 23 24 The `configure' shell script attempts to guess correct values for 25various system-dependent variables used during compilation. It uses 26those values to create a `Makefile' in each directory of the package. 27It may also create one or more `.h' files containing system-dependent 28definitions. Finally, it creates a shell script `config.status' that 29you can run in the future to recreate the current configuration, and a 30file `config.log' containing compiler output (useful mainly for 31debugging `configure'). 32 33 It can also use an optional file (typically called `config.cache' 34and enabled with `--cache-file=config.cache' or simply `-C') that saves 35the results of its tests to speed up reconfiguring. Caching is 36disabled by default to prevent problems with accidental use of stale 37cache files. 38 39 If you need to do unusual things to compile the package, please try 40to figure out how `configure' could check whether to do them, and mail 41diffs or instructions to the address given in the `README' so they can 42be considered for the next release. If you are using the cache, and at 43some point `config.cache' contains results you don't want to keep, you 44may remove or edit it. 45 46 The file `configure.ac' (or `configure.in') is used to create 47`configure' by a program called `autoconf'. You need `configure.ac' if 48you want to change it or regenerate `configure' using a newer version 49of `autoconf'. 50 51 The simplest way to compile this package is: 52 53 1. `cd' to the directory containing the package's source code and type 54 `./configure' to configure the package for your system. 55 56 Running `configure' might take a while. While running, it prints 57 some messages telling which features it is checking for. 58 59 2. Type `make' to compile the package. 60 61 3. Optionally, type `make check' to run any self-tests that come with 62 the package, generally using the just-built uninstalled binaries. 63 64 4. Type `make install' to install the programs and any data files and 65 documentation. When installing into a prefix owned by root, it is 66 recommended that the package be configured and built as a regular 67 user, and only the `make install' phase executed with root 68 privileges. 69 70 5. Optionally, type `make installcheck' to repeat any self-tests, but 71 this time using the binaries in their final installed location. 72 This target does not install anything. Running this target as a 73 regular user, particularly if the prior `make install' required 74 root privileges, verifies that the installation completed 75 correctly. 76 77 6. You can remove the program binaries and object files from the 78 source code directory by typing `make clean'. To also remove the 79 files that `configure' created (so you can compile the package for 80 a different kind of computer), type `make distclean'. There is 81 also a `make maintainer-clean' target, but that is intended mainly 82 for the package's developers. If you use it, you may have to get 83 all sorts of other programs in order to regenerate files that came 84 with the distribution. 85 86 7. Often, you can also type `make uninstall' to remove the installed 87 files again. In practice, not all packages have tested that 88 uninstallation works correctly, even though it is required by the 89 GNU Coding Standards. 90 91 8. Some packages, particularly those that use Automake, provide `make 92 distcheck', which can by used by developers to test that all other 93 targets like `make install' and `make uninstall' work correctly. 94 This target is generally not run by end users. 95 96Compilers and Options 97===================== 98 99 Some systems require unusual options for compilation or linking that 100the `configure' script does not know about. Run `./configure --help' 101for details on some of the pertinent environment variables. 102 103 You can give `configure' initial values for configuration parameters 104by setting variables in the command line or in the environment. Here 105is an example: 106 107 ./configure CC=c99 CFLAGS=-g LIBS=-lposix 108 109 *Note Defining Variables::, for more details. 110 111Compiling For Multiple Architectures 112==================================== 113 114 You can compile the package for more than one kind of computer at the 115same time, by placing the object files for each architecture in their 116own directory. To do this, you can use GNU `make'. `cd' to the 117directory where you want the object files and executables to go and run 118the `configure' script. `configure' automatically checks for the 119source code in the directory that `configure' is in and in `..'. This 120is known as a "VPATH" build. 121 122 With a non-GNU `make', it is safer to compile the package for one 123architecture at a time in the source code directory. After you have 124installed the package for one architecture, use `make distclean' before 125reconfiguring for another architecture. 126 127 On MacOS X 10.5 and later systems, you can create libraries and 128executables that work on multiple system types--known as "fat" or 129"universal" binaries--by specifying multiple `-arch' options to the 130compiler but only a single `-arch' option to the preprocessor. Like 131this: 132 133 ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \ 134 CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \ 135 CPP="gcc -E" CXXCPP="g++ -E" 136 137 This is not guaranteed to produce working output in all cases, you 138may have to build one architecture at a time and combine the results 139using the `lipo' tool if you have problems. 140 141Installation Names 142================== 143 144 By default, `make install' installs the package's commands under 145`/usr/local/bin', include files under `/usr/local/include', etc. You 146can specify an installation prefix other than `/usr/local' by giving 147`configure' the option `--prefix=PREFIX', where PREFIX must be an 148absolute file name. 149 150 You can specify separate installation prefixes for 151architecture-specific files and architecture-independent files. If you 152pass the option `--exec-prefix=PREFIX' to `configure', the package uses 153PREFIX as the prefix for installing programs and libraries. 154Documentation and other data files still use the regular prefix. 155 156 In addition, if you use an unusual directory layout you can give 157options like `--bindir=DIR' to specify different values for particular 158kinds of files. Run `configure --help' for a list of the directories 159you can set and what kinds of files go in them. In general, the 160default for these options is expressed in terms of `${prefix}', so that 161specifying just `--prefix' will affect all of the other directory 162specifications that were not explicitly provided. 163 164 The most portable way to affect installation locations is to pass the 165correct locations to `configure'; however, many packages provide one or 166both of the following shortcuts of passing variable assignments to the 167`make install' command line to change installation locations without 168having to reconfigure or recompile. 169 170 The first method involves providing an override variable for each 171affected directory. For example, `make install 172prefix=/alternate/directory' will choose an alternate location for all 173directory configuration variables that were expressed in terms of 174`${prefix}'. Any directories that were specified during `configure', 175but not in terms of `${prefix}', must each be overridden at install 176time for the entire installation to be relocated. The approach of 177makefile variable overrides for each directory variable is required by 178the GNU Coding Standards, and ideally causes no recompilation. 179However, some platforms have known limitations with the semantics of 180shared libraries that end up requiring recompilation when using this 181method, particularly noticeable in packages that use GNU Libtool. 182 183 The second method involves providing the `DESTDIR' variable. For 184example, `make install DESTDIR=/alternate/directory' will prepend 185`/alternate/directory' before all installation names. The approach of 186`DESTDIR' overrides is not required by the GNU Coding Standards, and 187does not work on platforms that have drive letters. On the other hand, 188it does better at avoiding recompilation issues, and works well even 189when some directory options were not specified in terms of `${prefix}' 190at `configure' time. 191 192Optional Features 193================= 194 195 If the package supports it, you can cause programs to be installed 196with an extra prefix or suffix on their names by giving `configure' the 197option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. 198 199 Some packages pay attention to `--enable-FEATURE' options to 200`configure', where FEATURE indicates an optional part of the package. 201They may also pay attention to `--with-PACKAGE' options, where PACKAGE 202is something like `gnu-as' or `x' (for the X Window System). The 203`README' should mention any `--enable-' and `--with-' options that the 204package recognizes. 205 206 For packages that use the X Window System, `configure' can usually 207find the X include and library files automatically, but if it doesn't, 208you can use the `configure' options `--x-includes=DIR' and 209`--x-libraries=DIR' to specify their locations. 210 211 Some packages offer the ability to configure how verbose the 212execution of `make' will be. For these packages, running `./configure 213--enable-silent-rules' sets the default to minimal output, which can be 214overridden with `make V=1'; while running `./configure 215--disable-silent-rules' sets the default to verbose, which can be 216overridden with `make V=0'. 217 218Particular systems 219================== 220 221 On HP-UX, the default C compiler is not ANSI C compatible. If GNU 222CC is not installed, it is recommended to use the following options in 223order to use an ANSI C compiler: 224 225 ./configure CC="cc -Ae -D_XOPEN_SOURCE=500" 226 227and if that doesn't work, install pre-built binaries of GCC for HP-UX. 228 229 HP-UX `make' updates targets which have the same time stamps as 230their prerequisites, which makes it generally unusable when shipped 231generated files such as `configure' are involved. Use GNU `make' 232instead. 233 234 On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot 235parse its `<wchar.h>' header file. The option `-nodtk' can be used as 236a workaround. If GNU CC is not installed, it is therefore recommended 237to try 238 239 ./configure CC="cc" 240 241and if that doesn't work, try 242 243 ./configure CC="cc -nodtk" 244 245 On Solaris, don't put `/usr/ucb' early in your `PATH'. This 246directory contains several dysfunctional programs; working variants of 247these programs are available in `/usr/bin'. So, if you need `/usr/ucb' 248in your `PATH', put it _after_ `/usr/bin'. 249 250 On Haiku, software installed for all users goes in `/boot/common', 251not `/usr/local'. It is recommended to use the following options: 252 253 ./configure --prefix=/boot/common 254 255Specifying the System Type 256========================== 257 258 There may be some features `configure' cannot figure out 259automatically, but needs to determine by the type of machine the package 260will run on. Usually, assuming the package is built to be run on the 261_same_ architectures, `configure' can figure that out, but if it prints 262a message saying it cannot guess the machine type, give it the 263`--build=TYPE' option. TYPE can either be a short name for the system 264type, such as `sun4', or a canonical name which has the form: 265 266 CPU-COMPANY-SYSTEM 267 268where SYSTEM can have one of these forms: 269 270 OS 271 KERNEL-OS 272 273 See the file `config.sub' for the possible values of each field. If 274`config.sub' isn't included in this package, then this package doesn't 275need to know the machine type. 276 277 If you are _building_ compiler tools for cross-compiling, you should 278use the option `--target=TYPE' to select the type of system they will 279produce code for. 280 281 If you want to _use_ a cross compiler, that generates code for a 282platform different from the build platform, you should specify the 283"host" platform (i.e., that on which the generated programs will 284eventually be run) with `--host=TYPE'. 285 286Sharing Defaults 287================ 288 289 If you want to set default values for `configure' scripts to share, 290you can create a site shell script called `config.site' that gives 291default values for variables like `CC', `cache_file', and `prefix'. 292`configure' looks for `PREFIX/share/config.site' if it exists, then 293`PREFIX/etc/config.site' if it exists. Or, you can set the 294`CONFIG_SITE' environment variable to the location of the site script. 295A warning: not all `configure' scripts look for a site script. 296 297Defining Variables 298================== 299 300 Variables not defined in a site shell script can be set in the 301environment passed to `configure'. However, some packages may run 302configure again during the build, and the customized values of these 303variables may be lost. In order to avoid this problem, you should set 304them in the `configure' command line, using `VAR=value'. For example: 305 306 ./configure CC=/usr/local2/bin/gcc 307 308causes the specified `gcc' to be used as the C compiler (unless it is 309overridden in the site shell script). 310 311Unfortunately, this technique does not work for `CONFIG_SHELL' due to 312an Autoconf limitation. Until the limitation is lifted, you can use 313this workaround: 314 315 CONFIG_SHELL=/bin/bash ./configure CONFIG_SHELL=/bin/bash 316 317`configure' Invocation 318====================== 319 320 `configure' recognizes the following options to control how it 321operates. 322 323`--help' 324`-h' 325 Print a summary of all of the options to `configure', and exit. 326 327`--help=short' 328`--help=recursive' 329 Print a summary of the options unique to this package's 330 `configure', and exit. The `short' variant lists options used 331 only in the top level, while the `recursive' variant lists options 332 also present in any nested packages. 333 334`--version' 335`-V' 336 Print the version of Autoconf used to generate the `configure' 337 script, and exit. 338 339`--cache-file=FILE' 340 Enable the cache: use and save the results of the tests in FILE, 341 traditionally `config.cache'. FILE defaults to `/dev/null' to 342 disable caching. 343 344`--config-cache' 345`-C' 346 Alias for `--cache-file=config.cache'. 347 348`--quiet' 349`--silent' 350`-q' 351 Do not print messages saying which checks are being made. To 352 suppress all normal output, redirect it to `/dev/null' (any error 353 messages will still be shown). 354 355`--srcdir=DIR' 356 Look for the package's source code in directory DIR. Usually 357 `configure' can determine that directory automatically. 358 359`--prefix=DIR' 360 Use DIR as the installation prefix. *note Installation Names:: 361 for more details, including other options available for fine-tuning 362 the installation locations. 363 364`--no-create' 365`-n' 366 Run the configure checks, but stop before creating any output 367 files. 368 369`configure' also accepts some other, not widely useful, options. Run 370`configure --help' for more details. 371