| Name | Date | Size | #Lines | LOC | ||
|---|---|---|---|---|---|---|
| .. | 05-Jul-2021 | - | ||||
| Kconfig | H A D | 05-Jul-2021 | 194 | 15 | 9 | |
| MAINTAINERS | H A D | 05-Jul-2021 | 179 | 8 | 6 | |
| Makefile | H A D | 05-Jul-2021 | 224 | 14 | 6 | |
| README | H A D | 05-Jul-2021 | 993 | 38 | 30 | |
| imx8mm_beacon.c | H A D | 05-Jul-2021 | 1.2 KiB | 58 | 39 | |
| lpddr4_timing.c | H A D | 05-Jul-2021 | 41.1 KiB | 1,981 | 1,911 | |
| spl.c | H A D | 05-Jul-2021 | 3.1 KiB | 159 | 111 |
README
1U-Boot for the Beacon EmbeddedWorks Devkit 2 3Quick Start 4=========== 5- Build the ARM Trusted firmware binary 6- Get ddr firmware 7- Build U-Boot 8- Boot 9 10Get and Build the ARM Trusted firmware 11====================================== 12Note: $(srctree) is U-Boot source directory 13 14$ git clone https://source.codeaurora.org/external/imx/imx-atf 15$ git checkout imx_4.19.35_1.0.0 16$ make PLAT=imx8mm bl31 ARCH=arm CROSS_COMPILE=aarch64-linux-gnu- 17$ cp build/imx8mm/release/bl31.bin $(srctree) 18 19Get the DDR firmware 20==================== 21$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.5.bin 22$ chmod +x firmware-imx-8.5.bin 23$ ./firmware-imx-8.5 24$ cp firmware-imx-8.5/firmware/ddr/synopsys/lpddr4*.bin $(srctree) 25 26Build U-Boot 27============ 28$ make imx8mm_beacon_defconfig 29$ make flash.bin CROSS_COMPILE=aarch64-linux-gnu- ATF_LOAD_ADDR=0x920000 30 31Burn U-Boot to microSD Card 32=========================== 33$ sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=33 34 35Boot 36==== 37Set Boot switch to SD boot 38