• Home
  • History
  • Annotate
Name Date Size #Lines LOC

..05-Jul-2021-

KconfigH A D05-Jul-2021278 1711

MAINTAINERSH A D05-Jul-2021958 3229

MakefileH A D05-Jul-2021291 1712

READMEH A D05-Jul-202113.3 KiB387332

cpld.cH A D05-Jul-20212.8 KiB11680

cpld.hH A D05-Jul-20211.7 KiB4730

ddr.cH A D05-Jul-20213.6 KiB147106

ddr.hH A D05-Jul-20211.5 KiB5737

diu.cH A D05-Jul-20212.2 KiB8553

eth.cH A D05-Jul-20214.2 KiB158121

law.cH A D05-Jul-2021882 3224

pci.cH A D05-Jul-2021438 2618

spl.cH A D05-Jul-20213.4 KiB142103

t1040_nand_rcw.cfgH A D05-Jul-2021214 87

t1040_sd_rcw.cfgH A D05-Jul-2021214 87

t1040_spi_rcw.cfgH A D05-Jul-2021214 87

t1040d4_nand_rcw.cfgH A D05-Jul-2021214 87

t1040d4_sd_rcw.cfgH A D05-Jul-2021214 87

t1040d4_spi_rcw.cfgH A D05-Jul-2021214 87

t1042_nand_rcw.cfgH A D05-Jul-2021214 87

t1042_pi_nand_rcw.cfgH A D05-Jul-2021214 87

t1042_pi_sd_rcw.cfgH A D05-Jul-2021214 87

t1042_pi_spi_rcw.cfgH A D05-Jul-2021214 87

t1042_sd_rcw.cfgH A D05-Jul-2021214 87

t1042_spi_rcw.cfgH A D05-Jul-2021214 87

t1042d4_nand_rcw.cfgH A D05-Jul-2021214 87

t1042d4_sd_rcw.cfgH A D05-Jul-2021214 87

t1042d4_spi_rcw.cfgH A D05-Jul-2021214 87

t104x_pbi.cfgH A D05-Jul-2021784 3736

t104x_pbi_sb.cfgH A D05-Jul-2021820 3938

t104xrdb.cH A D05-Jul-20213.5 KiB165120

t104xrdb.hH A D05-Jul-2021243 135

tlb.cH A D05-Jul-20214.5 KiB13292

README

1Overview
2--------
3The T1040RDB is a Freescale reference board that hosts the T1040 SoC
4(and variants). Variants inclued T1042 presonality of T1040, in which
5case T1040RDB can also be called T1042RDB.
6
7The T1042RDB is a Freescale reference board that hosts the T1042 SoC
8(and variants). The board is similar to T1040RDB, T1040 is a reduced
9personality of T1040 SoC without Integrated 8-port Gigabit(L2 Switch).
10
11The T1042RDB_PI is a Freescale reference board that hosts the T1042 SoC.
12(a personality of T1040 SoC). The board is similar to T1040RDB but is
13designed specially with low power features targeted for Printing Image Market.
14
15The T1040D4RDB is a Freescale reference board that hosts the T1040 SoC.
16The board is re-designed T1040RDB board with following changes :
17    - Support of DDR4 memory and some enhancements
18
19The T1042D4RDB is a Freescale reference board that hosts the T1042 SoC.
20The board is re-designed T1040RDB board with following changes :
21    - Support of DDR4 memory
22    - Support for 0x86 serdes protocol which can support following interfaces
23        - 2 RGMII's on DTSEC4, DTSEC5
24        - 3 SGMII on DTSEC1, DTSEC2 & DTSEC3
25
26Basic difference's among T1040RDB, T1042RDB_PI, T1042RDB
27-------------------------------------------------------------------------
28Board		Si		Protocol		Targeted Market
29-------------------------------------------------------------------------
30T1040RDB	T1040		0x66                    Networking
31T1040RDB	T1042		0x86                    Networking
32T1042RDB_PI	T1042		0x06                    Printing & Imaging
33T1040D4RDB	T1040		0x66                    Networking
34T1042D4RDB	T1042		0x86                    Networking
35
36
37T1040 SoC Overview
38------------------
39The QorIQ T1040/T1042 processor support four integrated 64-bit e5500 PA
40processor cores with high-performance data path acceleration architecture
41and network peripheral interfaces required for networking & telecommunications.
42
43The T1040/T1042 SoC includes the following function and features:
44
45 - Four e5500 cores, each with a private 256 KB L2 cache
46 - 256 KB shared L3 CoreNet platform cache (CPC)
47 - Interconnect CoreNet platform
48 - 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and interleaving
49   support
50 - Data Path Acceleration Architecture (DPAA) incorporating acceleration
51 for the following functions:
52    -  Packet parsing, classification, and distribution
53    -  Queue management for scheduling, packet sequencing, and congestion
54       management
55    -  Cryptography Acceleration (SEC 5.0)
56    - RegEx Pattern Matching Acceleration (PME 2.2)
57    - IEEE Std 1588 support
58    - Hardware buffer management for buffer allocation and deallocation
59 - Ethernet interfaces
60    - Integrated 8-port Gigabit Ethernet switch (T1040 only)
61    - Four 1 Gbps Ethernet controllers
62 - Two RGMII interfaces or one RGMII and one MII interfaces
63 - High speed peripheral interfaces
64   - Four PCI Express 2.0 controllers running at up to 5 GHz
65   - Two SATA controllers supporting 1.5 and 3.0 Gb/s operation
66   - Upto two QSGMII interface
67   - Upto six SGMII interface supporting 1000 Mbps
68   - One SGMII interface supporting upto 2500 Mbps
69 - Additional peripheral interfaces
70   - Two USB 2.0 controllers with integrated PHY
71   - SD/eSDHC/eMMC
72   - eSPI controller
73   - Four I2C controllers
74   - Four UARTs
75   - Four GPIO controllers
76   - Integrated flash controller (IFC)
77   - LCD and HDMI interface (DIU) with 12 bit dual data rate
78   - TDM interface
79 - Multicore programmable interrupt controller (PIC)
80 - Two 8-channel DMA engines
81 - Single source clocking implementation
82 - Deep Sleep power implementaion (wakeup from GPIO/Timer/Ethernet/USB)
83
84T1040 SoC Personalities
85-------------------------
86T1022 Personality:
87T1022 is a reduced personality of T1040 with less core/clusters.
88
89T1042 Personality:
90T1042 is a reduced personality of T1040 without Integrated 8-port Gigabit
91Ethernet switch. Rest of the blocks are same as T1040
92
93
94T1040RDB board Overview
95-------------------------
96 - SERDES Connections, 8 lanes information:
97	1: None
98	2: SGMII
99	3: QSGMII
100	4: QSGMII
101	5: PCIe1 x1 slot
102	6: mini PCIe connector
103	7: mini PCIe connector
104	8: SATA connector
105 - DDR Controller
106     - Supports rates of up to 1600 MHz data-rate
107     - Supports one DDR3LP UDIMM/RDIMMs, of single-, dual- or quad-rank types.
108 - IFC/Local Bus
109     - NAND flash: 1GB 8-bit NAND flash
110     - NOR: 128MB 16-bit NOR Flash
111 - Ethernet
112     - Two on-board RGMII 10/100/1G ethernet ports.
113 - CPLD
114 - Clocks
115     - System and DDR clock (SYSCLK, “DDRCLK”)
116     - SERDES clocks
117 - Power Supplies
118 - USB
119     - Supports two USB 2.0 ports with integrated PHYs
120     - Two type A ports with 5V@1.5A per port.
121 - SDHC
122     - SDHC/SDXC connector
123 - SPI
124    -  On-board 64MB SPI flash
125 - Other IO
126    - Two Serial ports
127    - Four I2C ports
128
129T1042RDB_PI board Overview
130-------------------------
131 - SERDES Connections, 8 lanes information:
132	1, 2, 3, 4 : PCIe x4 slot
133	5: mini PCIe connector
134	6: mini PCIe connector
135	7: NA
136	8: SATA connector
137 - DDR Controller
138     - Supports rates of up to 1600 MHz data-rate
139     - Supports one DDR3LP UDIMM/RDIMMs, of single-, dual- or quad-rank types.
140 - IFC/Local Bus
141     - NAND flash: 1GB 8-bit NAND flash
142     - NOR: 128MB 16-bit NOR Flash
143 - Ethernet
144     - Two on-board RGMII 10/100/1G ethernet ports.
145 - CPLD
146 - Clocks
147     - System and DDR clock (SYSCLK, “DDRCLK”)
148     - SERDES clocks
149 - Video
150     - DIU supports video at up to 1280x1024x32bpp
151 - Power Supplies
152 - USB
153     - Supports two USB 2.0 ports with integrated PHYs
154     - Two type A ports with 5V@1.5A per port.
155 - SDHC
156     - SDHC/SDXC connector
157 - SPI
158    -  On-board 64MB SPI flash
159 - Other IO
160    - Two Serial ports
161    - Four I2C ports
162
163Memory map
164-----------
165The addresses in brackets are physical addresses.
166
167Start Address  End Address      Description                     Size
1680xF_FFDF_0000  0xF_FFDF_0FFF    IFC - CPLD                      4KB
1690xF_FF80_0000  0xF_FF80_FFFF    IFC - NAND Flash                64KB
1700xF_FE00_0000  0xF_FEFF_FFFF    CCSRBAR                         16MB
1710xF_F803_0000  0xF_F803_FFFF    PCI Express 4 I/O Space         64KB
1720xF_F802_0000  0xF_F802_FFFF    PCI Express 3 I/O Space	        64KB
1730xF_F801_0000  0xF_F801_FFFF    PCI Express 2 I/O Space         64KB
1740xF_F800_0000  0xF_F800_FFFF    PCI Express 1 I/O Space	        64KB
1750xF_F600_0000  0xF_F7FF_FFFF    Queue manager software portal   32MB
1760xF_F400_0000  0xF_F5FF_FFFF    Buffer manager software portal  32MB
1770xF_E800_0000  0xF_EFFF_FFFF    IFC - NOR Flash                 128MB
1780xF_0000_0000  0xF_003F_FFFF    DCSR                            4MB
1790xC_3000_0000  0xC_3FFF_FFFF    PCI Express 4 Mem Space         256MB
1800xC_2000_0000  0xC_2FFF_FFFF    PCI Express 3 Mem Space         256MB
1810xC_1000_0000  0xC_1FFF_FFFF    PCI Express 2 Mem Space         256MB
1820xC_0000_0000  0xC_0FFF_FFFF    PCI Express 1 Mem Space         256MB
1830x0_0000_0000  0x0_ffff_ffff    DDR                             2GB
184
185
186NOR Flash memory Map
187---------------------
188 Start          End             Definition                       Size
1890xEFF40000      0xEFFFFFFF      U-Boot (current bank)            768KB
1900xEFF20000      0xEFF3FFFF      U-Boot env (current bank)        128KB
1910xEFF00000      0xEFF1FFFF      FMAN Ucode (current bank)        128KB
1920xED300000      0xEFEFFFFF      rootfs (alt bank)                44MB
1930xEC800000      0xEC8FFFFF      Hardware device tree (alt bank)  1MB
1940xEC020000      0xEC7FFFFF      Linux.uImage (alt bank)          7MB + 875KB
1950xEC000000      0xEC01FFFF      RCW (alt bank)                   128KB
1960xEBF40000      0xEBFFFFFF      U-Boot (alt bank)                768KB
1970xEBF20000      0xEBF3FFFF      U-Boot env (alt bank)            128KB
1980xEBF00000      0xEBF1FFFF      FMAN ucode (alt bank)            128KB
1990xE9300000      0xEBEFFFFF      rootfs (current bank)            44MB
2000xE8800000      0xE88FFFFF      Hardware device tree (cur bank)  11MB + 512KB
2010xE8020000      0xE86FFFFF      Linux.uImage (current bank)      7MB + 875KB
2020xE8000000      0xE801FFFF      RCW (current bank)               128KB
203
204
205Various Software configurations/environment variables/commands
206--------------------------------------------------------------
207The below commands apply to the board
208
2091. U-Boot environment variable hwconfig
210   The default hwconfig is:
211	hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=cs0_cs1;usb1:
212					dr_mode=host,phy_type=utmi
213   Note: For USB gadget set "dr_mode=peripheral"
214
2152. FMAN Ucode versions
216   fsl_fman_ucode_t1040.bin
217
2183. Switching to alternate bank
219   Commands for switching to alternate bank.
220
221	1. To change from vbank0 to vbank4
222		=> cpld reset altbank (it will boot using vbank4)
223
224	2.To change from vbank4 to vbank0
225		=> cpld reset (it will boot using vbank0)
226
227NAND boot with 2 Stage boot loader
228----------------------------------
229PBL initialise the internal SRAM and copy SPL(160KB) in SRAM.
230SPL further initialise DDR using SPD and environment variables and copy
231U-Boot(768 KB) from flash to DDR.
232Finally SPL transer control to U-Boot for futher booting.
233
234SPL has following features:
235 - Executes within 256K
236 - No relocation required
237
238 Run time view of SPL framework during  boot :-
239 -----------------------------------------------
240 Area        | Address                         |
241-----------------------------------------------
242 Secure boot | 0xFFFC0000 (32KB)               |
243 headers     |                                 |
244 -----------------------------------------------
245 GD, BD      | 0xFFFC8000 (4KB)                |
246 -----------------------------------------------
247 ENV         | 0xFFFC9000 (8KB)                |
248 -----------------------------------------------
249 HEAP        | 0xFFFCB000 (30KB)               |
250 -----------------------------------------------
251 STACK       | 0xFFFD8000 (22KB)               |
252 -----------------------------------------------
253 U-Boot SPL  | 0xFFFD8000 (160KB)              |
254 -----------------------------------------------
255
256NAND Flash memory Map on T104xRDB
257------------------------------------------
258 Start		 End		Definition			Size
2590x000000	0x0FFFFF	U-Boot                          1MB
2600x180000	0x19FFFF	U-Boot env                      128KB
2610x280000	0x29FFFF	FMAN Ucode                      128KB
2620x380000	0x39FFFF	QE Firmware                     128KB
263
264SD Card memory Map on T104xRDB
265------------------------------------------
266 Block		#blocks		Definition			Size
2670x008		2048		U-Boot                          1MB
2680x800		0024		U-Boot env                      8KB
2690x820		0256		FMAN Ucode                      128KB
2700x920		0256		QE Firmware                     128KB
271
272SPI Flash memory Map on T104xRDB
273------------------------------------------
274 Start		 End		Definition			Size
2750x000000	0x0FFFFF	U-Boot                          1MB
2760x100000	0x101FFF	U-Boot env                      8KB
2770x110000	0x12FFFF	FMAN Ucode                      128KB
2780x130000	0x14FFFF	QE Firmware                     128KB
279
280Please note QE Firmware is only valid for T1040RDB
281
282
283Switch Settings for T104xRDB boards: (ON is 0, OFF is 1)
284==========================================================
285NOR boot SW setting:
286SW1: 00010011
287SW2: 10111011
288SW3: 11100001
289
290NAND boot SW setting:
291SW1: 10001000
292SW2: 00111011
293SW3: 11110001
294
295SPI boot SW setting:
296SW1: 00100010
297SW2: 10111011
298SW3: 11100001
299
300SD boot SW setting:
301SW1: 00100000
302SW2: 00111011
303SW3: 11100001
304
305Switch Settings for T104xD4RDB boards: (ON is 0, OFF is 1)
306=============================================================
307NOR boot SW setting:
308SW1: 00010011
309SW2: 10111001
310SW3: 11100001
311
312NAND boot SW setting:
313SW1: 10001000
314SW2: 00111001
315SW3: 11110001
316
317SPI boot SW setting:
318SW1: 00100010
319SW2: 10111001
320SW3: 11100001
321
322SD boot SW setting:
323SW1: 00100000
324SW2: 00111001
325SW3: 11100001
326
327PBL-based image generation
328==========================
329Changes only the required register bit in in PBI commands.
330
331Provides reference code which might needs some
332modification as per requirement.
333example:
334By default PBI_SRC=14 (which is for IFC-NAND/NOR) in rcw.cfg file
335which needs to be changed for SPI and SD.
336
337For SD-boot
338==============
3391. Set RCW[192:195], PBI_SRC bits as 6 in RCW file (t1040d4_rcw.cfg type files)
340
341example:
342 RCW file: board/freescale/t104xrdb/t1040d4_rcw.cfg
343
344Change
34566000002 40000002 ec027000 01000000
346to
34766000002 40000002 6c027000 01000000
348
3492. SD does not support flush so remove flush from pbl, make changes in
350   tools/pblimage.c file, Update value of pbl_end_cmd[0] = 0x09138000
351   with 0x091380c0
352
353For SPI-boot
354==============
3551. Set RCW[192:195], PBI_SRC bits as 5 in RCW file (t1040d4_rcw.cfg type files)
356
357example:
358 RCW file: board/freescale/t104xrdb/t1040d4_rcw.cfg
359
360Change
36166000002 40000002 ec027000 01000000
362to
36366000002 40000002 5c027000 01000000
364
3652. SPI does not support flush so remove flush from pbl, make changes in
366   tools/pblimage.c file, Update value of pbl_end_cmd[0] = 0x09138000
367   with 0x091380c0
368
369Device tree support and how to enable it for different configs
370--------------------------------------------------------------
371Device tree support is available for t1042d4rdb for below mentioned boot,
3721. NOR Boot
3732. NAND Boot
3743. SD Boot
3754. SPIFLASH Boot
376
377To enable device tree support for other boot, below configs need to be
378enabled in relative defconfig file,
3791. CONFIG_DEFAULT_DEVICE_TREE="t1042d4rdb" (Change default device tree name if required)
3802. CONFIG_OF_CONTROL
3813. CONFIG_MPC85XX_HAVE_RESET_VECTOR if reset vector is located at
382   CONFIG_RESET_VECTOR_ADDRESS - 0xffc
383
384If device tree support is enabled in defconfig,
3851. use 'u-boot-with-dtb.bin' for NOR boot.
3862. use 'u-boot-with-spl-pbl.bin' for other boot.
387