1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * Copyright (C) 2014 Google, Inc
4  */
5 #include <common.h>
6 #include <dm.h>
7 #include <errno.h>
8 #include <fdtdec.h>
9 #include <log.h>
10 #include <malloc.h>
11 #include <pch.h>
12 #include <asm/cpu.h>
13 #include <asm/global_data.h>
14 #include <asm/intel_regs.h>
15 #include <asm/io.h>
16 #include <asm/lapic.h>
17 #include <asm/lpc_common.h>
18 #include <asm/pci.h>
19 #include <asm/arch/model_206ax.h>
20 #include <asm/arch/pch.h>
21 #include <asm/arch/sandybridge.h>
22 #include <linux/bitops.h>
23 #include <linux/delay.h>
24 
25 DECLARE_GLOBAL_DATA_PTR;
26 
27 #define GPIO_BASE		0x48
28 #define BIOS_CTRL		0xdc
29 
30 #define RCBA_AUDIO_CONFIG	0x2030
31 #define RCBA_AUDIO_CONFIG_HDA	BIT(31)
32 #define RCBA_AUDIO_CONFIG_MASK	0xfe
33 
34 #ifndef CONFIG_HAVE_FSP
35 static int pch_revision_id = -1;
36 static int pch_type = -1;
37 
38 /**
39  * pch_silicon_revision() - Read silicon revision ID from the PCH
40  *
41  * @dev:	PCH device
42  * @return silicon revision ID
43  */
44 static int pch_silicon_revision(struct udevice *dev)
45 {
46 	u8 val;
47 
48 	if (pch_revision_id < 0) {
49 		dm_pci_read_config8(dev, PCI_REVISION_ID, &val);
50 		pch_revision_id = val;
51 	}
52 
53 	return pch_revision_id;
54 }
55 
56 int pch_silicon_type(struct udevice *dev)
57 {
58 	u8 val;
59 
60 	if (pch_type < 0) {
61 		dm_pci_read_config8(dev, PCI_DEVICE_ID + 1, &val);
62 		pch_type = val;
63 	}
64 
65 	return pch_type;
66 }
67 
68 /**
69  * pch_silicon_supported() - Check if a certain revision is supported
70  *
71  * @dev:	PCH device
72  * @type:	PCH type
73  * @rev:	Minimum required resion
74  * @return 0 if not supported, 1 if supported
75  */
76 static int pch_silicon_supported(struct udevice *dev, int type, int rev)
77 {
78 	int cur_type = pch_silicon_type(dev);
79 	int cur_rev = pch_silicon_revision(dev);
80 
81 	switch (type) {
82 	case PCH_TYPE_CPT:
83 		/* CougarPoint minimum revision */
84 		if (cur_type == PCH_TYPE_CPT && cur_rev >= rev)
85 			return 1;
86 		/* PantherPoint any revision */
87 		if (cur_type == PCH_TYPE_PPT)
88 			return 1;
89 		break;
90 
91 	case PCH_TYPE_PPT:
92 		/* PantherPoint minimum revision */
93 		if (cur_type == PCH_TYPE_PPT && cur_rev >= rev)
94 			return 1;
95 		break;
96 	}
97 
98 	return 0;
99 }
100 
101 #define IOBP_RETRY 1000
102 static inline int iobp_poll(void)
103 {
104 	unsigned try = IOBP_RETRY;
105 	u32 data;
106 
107 	while (try--) {
108 		data = readl(RCB_REG(IOBPS));
109 		if ((data & 1) == 0)
110 			return 1;
111 		udelay(10);
112 	}
113 
114 	printf("IOBP timeout\n");
115 	return 0;
116 }
117 
118 void pch_iobp_update(struct udevice *dev, u32 address, u32 andvalue,
119 		     u32 orvalue)
120 {
121 	u32 data;
122 
123 	/* Set the address */
124 	writel(address, RCB_REG(IOBPIRI));
125 
126 	/* READ OPCODE */
127 	if (pch_silicon_supported(dev, PCH_TYPE_CPT, PCH_STEP_B0))
128 		writel(IOBPS_RW_BX, RCB_REG(IOBPS));
129 	else
130 		writel(IOBPS_READ_AX, RCB_REG(IOBPS));
131 	if (!iobp_poll())
132 		return;
133 
134 	/* Read IOBP data */
135 	data = readl(RCB_REG(IOBPD));
136 	if (!iobp_poll())
137 		return;
138 
139 	/* Check for successful transaction */
140 	if ((readl(RCB_REG(IOBPS)) & 0x6) != 0) {
141 		printf("IOBP read 0x%08x failed\n", address);
142 		return;
143 	}
144 
145 	/* Update the data */
146 	data &= andvalue;
147 	data |= orvalue;
148 
149 	/* WRITE OPCODE */
150 	if (pch_silicon_supported(dev, PCH_TYPE_CPT, PCH_STEP_B0))
151 		writel(IOBPS_RW_BX, RCB_REG(IOBPS));
152 	else
153 		writel(IOBPS_WRITE_AX, RCB_REG(IOBPS));
154 	if (!iobp_poll())
155 		return;
156 
157 	/* Write IOBP data */
158 	writel(data, RCB_REG(IOBPD));
159 	if (!iobp_poll())
160 		return;
161 }
162 
163 static int bd82x6x_probe(struct udevice *dev)
164 {
165 	if (!(gd->flags & GD_FLG_RELOC))
166 		return 0;
167 
168 	/* Cause the SATA device to do its init */
169 	uclass_first_device(UCLASS_AHCI, &dev);
170 
171 	return 0;
172 }
173 #endif /* CONFIG_HAVE_FSP */
174 
175 static int bd82x6x_pch_get_spi_base(struct udevice *dev, ulong *sbasep)
176 {
177 	u32 rcba;
178 
179 	dm_pci_read_config32(dev, PCH_RCBA, &rcba);
180 	/* Bits 31-14 are the base address, 13-1 are reserved, 0 is enable */
181 	rcba = rcba & 0xffffc000;
182 	*sbasep = rcba + 0x3800;
183 
184 	return 0;
185 }
186 
187 static int bd82x6x_set_spi_protect(struct udevice *dev, bool protect)
188 {
189 	return lpc_set_spi_protect(dev, BIOS_CTRL, protect);
190 }
191 
192 static int bd82x6x_get_gpio_base(struct udevice *dev, u32 *gbasep)
193 {
194 	u32 base;
195 
196 	/*
197 	 * GPIO_BASE moved to its current offset with ICH6, but prior to
198 	 * that it was unused (or undocumented). Check that it looks
199 	 * okay: not all ones or zeros.
200 	 *
201 	 * Note we don't need check bit0 here, because the Tunnel Creek
202 	 * GPIO base address register bit0 is reserved (read returns 0),
203 	 * while on the Ivybridge the bit0 is used to indicate it is an
204 	 * I/O space.
205 	 */
206 	dm_pci_read_config32(dev, GPIO_BASE, &base);
207 	if (base == 0x00000000 || base == 0xffffffff) {
208 		debug("%s: unexpected BASE value\n", __func__);
209 		return -ENODEV;
210 	}
211 
212 	/*
213 	 * Okay, I guess we're looking at the right device. The actual
214 	 * GPIO registers are in the PCI device's I/O space, starting
215 	 * at the offset that we just read. Bit 0 indicates that it's
216 	 * an I/O address, not a memory address, so mask that off.
217 	 */
218 	*gbasep = base & 1 ? base & ~3 : base & ~15;
219 
220 	return 0;
221 }
222 
223 static int bd82x6x_ioctl(struct udevice *dev, enum pch_req_t req, void *data,
224 			 int size)
225 {
226 	u32 rcba, val;
227 
228 	switch (req) {
229 	case PCH_REQ_HDA_CONFIG:
230 		dm_pci_read_config32(dev, PCH_RCBA, &rcba);
231 		val = readl(rcba + RCBA_AUDIO_CONFIG);
232 		if (!(val & RCBA_AUDIO_CONFIG_HDA))
233 			return -ENOENT;
234 
235 		return val & RCBA_AUDIO_CONFIG_MASK;
236 	case PCH_REQ_PMBASE_INFO: {
237 		struct pch_pmbase_info *pm = data;
238 		int ret;
239 
240 		/* Find the base address of the powermanagement registers */
241 		ret = dm_pci_read_config16(dev, 0x40, &pm->base);
242 		if (ret)
243 			return ret;
244 		pm->base &= 0xfffe;
245 		pm->gpio0_en_ofs = GPE0_EN;
246 		pm->pm1_sts_ofs = PM1_STS;
247 		pm->pm1_cnt_ofs = PM1_CNT;
248 
249 		return 0;
250 	}
251 	default:
252 		return -ENOSYS;
253 	}
254 }
255 
256 static const struct pch_ops bd82x6x_pch_ops = {
257 	.get_spi_base	= bd82x6x_pch_get_spi_base,
258 	.set_spi_protect = bd82x6x_set_spi_protect,
259 	.get_gpio_base	= bd82x6x_get_gpio_base,
260 	.ioctl		= bd82x6x_ioctl,
261 };
262 
263 static const struct udevice_id bd82x6x_ids[] = {
264 	{ .compatible = "intel,bd82x6x" },
265 	{ }
266 };
267 
268 U_BOOT_DRIVER(bd82x6x_drv) = {
269 	.name		= "bd82x6x",
270 	.id		= UCLASS_PCH,
271 	.of_match	= bd82x6x_ids,
272 #ifndef CONFIG_HAVE_FSP
273 	.probe		= bd82x6x_probe,
274 #endif
275 	.ops		= &bd82x6x_pch_ops,
276 };
277