1/* 2 * Copyright 2016 Gateworks Corporation 3 * 4 * This file is dual-licensed: you can use it either under the terms 5 * of the GPL or the X11 license, at your option. Note that this dual 6 * licensing only applies to this file, and not this project as a 7 * whole. 8 * 9 * a) This file is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License as 11 * published by the Free Software Foundation; either version 2 of 12 * the License, or (at your option) any later version. 13 * 14 * This file is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * You should have received a copy of the GNU General Public 20 * License along with this file; if not, write to the Free 21 * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, 22 * MA 02110-1301 USA 23 * 24 * Or, alternatively, 25 * 26 * b) Permission is hereby granted, free of charge, to any person 27 * obtaining a copy of this software and associated documentation 28 * files (the "Software"), to deal in the Software without 29 * restriction, including without limitation the rights to use, 30 * copy, modify, merge, publish, distribute, sublicense, and/or 31 * sell copies of the Software, and to permit persons to whom the 32 * Software is furnished to do so, subject to the following 33 * conditions: 34 * 35 * The above copyright notice and this permission notice shall be 36 * included in all copies or substantial portions of the Software. 37 * 38 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 39 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES 40 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 41 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT 42 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 43 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 44 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 45 * OTHER DEALINGS IN THE SOFTWARE. 46 */ 47 48#include <dt-bindings/gpio/gpio.h> 49#include <dt-bindings/input/linux-event-codes.h> 50#include <dt-bindings/interrupt-controller/irq.h> 51 52/ { 53 /* these are used by bootloader for disabling nodes */ 54 aliases { 55 led0 = &led0; 56 led1 = &led1; 57 nand = &gpmi; 58 usb0 = &usbh1; 59 usb1 = &usbotg; 60 }; 61 62 chosen { 63 stdout-path = &uart2; 64 }; 65 66 gpio-keys { 67 compatible = "gpio-keys"; 68 69 user-pb { 70 label = "user_pb"; 71 gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; 72 linux,code = <BTN_0>; 73 }; 74 75 user-pb1x { 76 label = "user_pb1x"; 77 linux,code = <BTN_1>; 78 interrupt-parent = <&gsc>; 79 interrupts = <0>; 80 }; 81 82 key-erased { 83 label = "key-erased"; 84 linux,code = <BTN_2>; 85 interrupt-parent = <&gsc>; 86 interrupts = <1>; 87 }; 88 89 eeprom-wp { 90 label = "eeprom_wp"; 91 linux,code = <BTN_3>; 92 interrupt-parent = <&gsc>; 93 interrupts = <2>; 94 }; 95 96 tamper { 97 label = "tamper"; 98 linux,code = <BTN_4>; 99 interrupt-parent = <&gsc>; 100 interrupts = <5>; 101 }; 102 103 switch-hold { 104 label = "switch_hold"; 105 linux,code = <BTN_5>; 106 interrupt-parent = <&gsc>; 107 interrupts = <7>; 108 }; 109 }; 110 111 leds { 112 compatible = "gpio-leds"; 113 pinctrl-names = "default"; 114 pinctrl-0 = <&pinctrl_gpio_leds>; 115 116 led0: user1 { 117 label = "user1"; 118 gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */ 119 default-state = "on"; 120 linux,default-trigger = "heartbeat"; 121 }; 122 123 led1: user2 { 124 label = "user2"; 125 gpios = <&gpio4 11 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */ 126 default-state = "off"; 127 }; 128 }; 129 130 memory@10000000 { 131 device_type = "memory"; 132 reg = <0x10000000 0x20000000>; 133 }; 134 135 pps { 136 compatible = "pps-gpio"; 137 pinctrl-names = "default"; 138 pinctrl-0 = <&pinctrl_pps>; 139 gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; 140 status = "okay"; 141 }; 142 143 reg_5p0v: regulator-5p0v { 144 compatible = "regulator-fixed"; 145 regulator-name = "5P0V"; 146 regulator-min-microvolt = <5000000>; 147 regulator-max-microvolt = <5000000>; 148 regulator-always-on; 149 }; 150 151 reg_usb_otg_vbus: regulator-usb-otg-vbus { 152 compatible = "regulator-fixed"; 153 regulator-name = "usb_otg_vbus"; 154 regulator-min-microvolt = <5000000>; 155 regulator-max-microvolt = <5000000>; 156 gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; 157 enable-active-high; 158 }; 159}; 160 161&gpmi { 162 pinctrl-names = "default"; 163 pinctrl-0 = <&pinctrl_gpmi_nand>; 164 status = "okay"; 165}; 166 167&hdmi { 168 pinctrl-names = "default"; 169 pinctrl-0 = <&pinctrl_hdmi>; 170 ddc-i2c-bus = <&i2c3>; 171 status = "okay"; 172}; 173 174&i2c1 { 175 clock-frequency = <100000>; 176 pinctrl-names = "default"; 177 pinctrl-0 = <&pinctrl_i2c1>; 178 status = "okay"; 179 180 gsc: gsc@20 { 181 compatible = "gw,gsc"; 182 reg = <0x20>; 183 interrupt-parent = <&gpio1>; 184 interrupts = <4 IRQ_TYPE_LEVEL_LOW>; 185 interrupt-controller; 186 #interrupt-cells = <1>; 187 #size-cells = <0>; 188 189 adc { 190 compatible = "gw,gsc-adc"; 191 #address-cells = <1>; 192 #size-cells = <0>; 193 194 channel@0 { 195 gw,mode = <0>; 196 reg = <0x00>; 197 label = "temp"; 198 }; 199 200 channel@2 { 201 gw,mode = <1>; 202 reg = <0x02>; 203 label = "vdd_vin"; 204 }; 205 206 channel@5 { 207 gw,mode = <1>; 208 reg = <0x05>; 209 label = "vdd_3p3"; 210 }; 211 212 channel@8 { 213 gw,mode = <1>; 214 reg = <0x08>; 215 label = "vdd_bat"; 216 }; 217 218 channel@b { 219 gw,mode = <1>; 220 reg = <0x0b>; 221 label = "vdd_5p0"; 222 }; 223 224 channel@e { 225 gw,mode = <1>; 226 reg = <0xe>; 227 label = "vdd_arm"; 228 }; 229 230 channel@11 { 231 gw,mode = <1>; 232 reg = <0x11>; 233 label = "vdd_soc"; 234 }; 235 236 channel@14 { 237 gw,mode = <1>; 238 reg = <0x14>; 239 label = "vdd_3p0"; 240 }; 241 242 channel@17 { 243 gw,mode = <1>; 244 reg = <0x17>; 245 label = "vdd_1p5"; 246 }; 247 248 channel@1d { 249 gw,mode = <1>; 250 reg = <0x1d>; 251 label = "vdd_1p8a"; 252 }; 253 254 channel@20 { 255 gw,mode = <1>; 256 reg = <0x20>; 257 label = "vdd_1p0b"; 258 }; 259 260 channel@26 { 261 gw,mode = <1>; 262 reg = <0x26>; 263 label = "vdd_an1"; 264 }; 265 }; 266 }; 267 268 gsc_gpio: gpio@23 { 269 compatible = "nxp,pca9555"; 270 reg = <0x23>; 271 gpio-controller; 272 #gpio-cells = <2>; 273 interrupt-parent = <&gsc>; 274 interrupts = <4>; 275 }; 276 277 eeprom1: eeprom@50 { 278 compatible = "atmel,24c02"; 279 reg = <0x50>; 280 pagesize = <16>; 281 }; 282 283 eeprom2: eeprom@51 { 284 compatible = "atmel,24c02"; 285 reg = <0x51>; 286 pagesize = <16>; 287 }; 288 289 eeprom3: eeprom@52 { 290 compatible = "atmel,24c02"; 291 reg = <0x52>; 292 pagesize = <16>; 293 }; 294 295 eeprom4: eeprom@53 { 296 compatible = "atmel,24c02"; 297 reg = <0x53>; 298 pagesize = <16>; 299 }; 300 301 rtc: ds1672@68 { 302 compatible = "dallas,ds1672"; 303 reg = <0x68>; 304 }; 305}; 306 307&i2c2 { 308 clock-frequency = <100000>; 309 pinctrl-names = "default"; 310 pinctrl-0 = <&pinctrl_i2c2>; 311 status = "okay"; 312 313 magn@1c { 314 compatible = "st,lsm9ds1-magn"; 315 reg = <0x1c>; 316 pinctrl-names = "default"; 317 pinctrl-0 = <&pinctrl_mag>; 318 interrupt-parent = <&gpio1>; 319 interrupts = <2 IRQ_TYPE_EDGE_RISING>; 320 }; 321 322 imu@6a { 323 compatible = "st,lsm9ds1-imu"; 324 reg = <0x6a>; 325 st,drdy-int-pin = <1>; 326 pinctrl-names = "default"; 327 pinctrl-0 = <&pinctrl_imu>; 328 interrupt-parent = <&gpio7>; 329 interrupts = <13 IRQ_TYPE_LEVEL_HIGH>; 330 }; 331 332 ltc3676: pmic@3c { 333 compatible = "lltc,ltc3676"; 334 reg = <0x3c>; 335 pinctrl-names = "default"; 336 pinctrl-0 = <&pinctrl_pmic>; 337 interrupt-parent = <&gpio1>; 338 interrupts = <8 IRQ_TYPE_EDGE_FALLING>; 339 340 regulators { 341 /* VDD_SOC (1+R1/R2 = 1.635) */ 342 reg_vdd_soc: sw1 { 343 regulator-name = "vddsoc"; 344 regulator-min-microvolt = <674400>; 345 regulator-max-microvolt = <1308000>; 346 lltc,fb-voltage-divider = <127000 200000>; 347 regulator-ramp-delay = <7000>; 348 regulator-boot-on; 349 regulator-always-on; 350 }; 351 352 /* VDD_DDR (1+R1/R2 = 2.105) */ 353 reg_vdd_ddr: sw2 { 354 regulator-name = "vddddr"; 355 regulator-min-microvolt = <868310>; 356 regulator-max-microvolt = <1684000>; 357 lltc,fb-voltage-divider = <221000 200000>; 358 regulator-ramp-delay = <7000>; 359 regulator-boot-on; 360 regulator-always-on; 361 }; 362 363 /* VDD_ARM (1+R1/R2 = 1.635) */ 364 reg_vdd_arm: sw3 { 365 regulator-name = "vddarm"; 366 regulator-min-microvolt = <674400>; 367 regulator-max-microvolt = <1308000>; 368 lltc,fb-voltage-divider = <127000 200000>; 369 regulator-ramp-delay = <7000>; 370 regulator-boot-on; 371 regulator-always-on; 372 }; 373 374 /* VDD_3P3 (1+R1/R2 = 1.281) */ 375 reg_3p3v: sw4 { 376 regulator-name = "vdd3p3"; 377 regulator-min-microvolt = <1880000>; 378 regulator-max-microvolt = <3647000>; 379 lltc,fb-voltage-divider = <200000 56200>; 380 regulator-ramp-delay = <7000>; 381 regulator-boot-on; 382 regulator-always-on; 383 }; 384 385 /* VDD_1P8a (1+R1/R2 = 2.505): Analog Video Decoder */ 386 reg_1p8a: ldo2 { 387 regulator-name = "vdd1p8a"; 388 regulator-min-microvolt = <1816125>; 389 regulator-max-microvolt = <1816125>; 390 lltc,fb-voltage-divider = <301000 200000>; 391 regulator-boot-on; 392 regulator-always-on; 393 }; 394 395 /* VDD_1P8b: microSD VDD_1P8 */ 396 reg_1p8b: ldo3 { 397 regulator-name = "vdd1p8b"; 398 regulator-min-microvolt = <1800000>; 399 regulator-max-microvolt = <1800000>; 400 regulator-boot-on; 401 }; 402 403 /* VDD_HIGH (1+R1/R2 = 4.17) */ 404 reg_3p0v: ldo4 { 405 regulator-name = "vdd3p0"; 406 regulator-min-microvolt = <3023250>; 407 regulator-max-microvolt = <3023250>; 408 lltc,fb-voltage-divider = <634000 200000>; 409 regulator-boot-on; 410 regulator-always-on; 411 }; 412 }; 413 }; 414}; 415 416&i2c3 { 417 clock-frequency = <100000>; 418 pinctrl-names = "default"; 419 pinctrl-0 = <&pinctrl_i2c3>; 420 status = "okay"; 421 422 adv7180: camera@20 { 423 compatible = "adi,adv7180"; 424 pinctrl-names = "default"; 425 pinctrl-0 = <&pinctrl_adv7180>; 426 reg = <0x20>; 427 powerdown-gpios = <&gpio5 20 GPIO_ACTIVE_LOW>; 428 interrupt-parent = <&gpio5>; 429 interrupts = <23 IRQ_TYPE_LEVEL_LOW>; 430 431 port { 432 adv7180_to_ipu1_csi0_mux: endpoint { 433 remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>; 434 bus-width = <8>; 435 }; 436 }; 437 }; 438}; 439 440&ipu1_csi0_from_ipu1_csi0_mux { 441 bus-width = <8>; 442}; 443 444&ipu1_csi0_mux_from_parallel_sensor { 445 remote-endpoint = <&adv7180_to_ipu1_csi0_mux>; 446 bus-width = <8>; 447}; 448 449&ipu1_csi0 { 450 pinctrl-names = "default"; 451 pinctrl-0 = <&pinctrl_ipu1_csi0>; 452}; 453 454&pcie { 455 pinctrl-names = "default"; 456 pinctrl-0 = <&pinctrl_pcie>; 457 reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>; 458 status = "okay"; 459}; 460 461&pwm2 { 462 pinctrl-names = "default"; 463 pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */ 464 status = "disabled"; 465}; 466 467&pwm3 { 468 pinctrl-names = "default"; 469 pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */ 470 status = "disabled"; 471}; 472 473&pwm4 { 474 pinctrl-names = "default"; 475 pinctrl-0 = <&pinctrl_pwm4>; /* MX6_DIO3 */ 476 status = "disabled"; 477}; 478 479&uart2 { 480 pinctrl-names = "default"; 481 pinctrl-0 = <&pinctrl_uart2>; 482 status = "okay"; 483}; 484 485&uart3 { 486 pinctrl-names = "default"; 487 pinctrl-0 = <&pinctrl_uart3>; 488 status = "okay"; 489}; 490 491&uart4 { 492 pinctrl-names = "default"; 493 pinctrl-0 = <&pinctrl_uart4>; 494 status = "okay"; 495}; 496 497&uart5 { 498 pinctrl-names = "default"; 499 pinctrl-0 = <&pinctrl_uart5>; 500 status = "okay"; 501}; 502 503&usbh1 { 504 status = "okay"; 505}; 506 507&usbotg { 508 vbus-supply = <®_usb_otg_vbus>; 509 pinctrl-names = "default"; 510 pinctrl-0 = <&pinctrl_usbotg>; 511 disable-over-current; 512 dr_mode = "otg"; 513 status = "okay"; 514}; 515 516&usdhc3 { 517 pinctrl-names = "default", "state_100mhz", "state_200mhz"; 518 pinctrl-0 = <&pinctrl_usdhc3>; 519 pinctrl-1 = <&pinctrl_usdhc3_100mhz>; 520 pinctrl-2 = <&pinctrl_usdhc3_200mhz>; 521 cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; 522 status = "okay"; 523}; 524 525&wdog1 { 526 pinctrl-names = "default"; 527 pinctrl-0 = <&pinctrl_wdog>; 528 fsl,ext-reset-output; 529}; 530 531&iomuxc { 532 pinctrl_adv7180: adv7180grp { 533 fsl,pins = < 534 MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23 0x0001b0b0 535 MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x4001b0b0 536 >; 537 }; 538 539 pinctrl_gpmi_nand: gpminandgrp { 540 fsl,pins = < 541 MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 542 MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 543 MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 544 MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 545 MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 546 MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 547 MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 548 MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 549 MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 550 MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 551 MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 552 MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 553 MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 554 MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 555 MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 556 >; 557 }; 558 559 pinctrl_hdmi: hdmigrp { 560 fsl,pins = < 561 MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE 0x1f8b0 562 >; 563 }; 564 565 pinctrl_i2c1: i2c1grp { 566 fsl,pins = < 567 MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 568 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 569 MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1 570 >; 571 }; 572 573 pinctrl_i2c2: i2c2grp { 574 fsl,pins = < 575 MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 576 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 577 >; 578 }; 579 580 pinctrl_i2c3: i2c3grp { 581 fsl,pins = < 582 MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 583 MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 584 >; 585 }; 586 587 pinctrl_imu: imugrp { 588 fsl,pins = < 589 MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0 590 >; 591 }; 592 593 pinctrl_ipu1_csi0: ipu1csi0grp { 594 fsl,pins = < 595 MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0 596 MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b0 597 MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b0 598 MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b0 599 MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b0 600 MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b0 601 MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b0 602 MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b0 603 MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x1b0b0 604 MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x1b0b0 605 MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0 606 >; 607 }; 608 609 pinctrl_gpio_leds: gpioledsgrp { 610 fsl,pins = < 611 MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 612 MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0 613 >; 614 }; 615 616 pinctrl_mag: maggrp { 617 fsl,pins = < 618 MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 619 >; 620 }; 621 622 pinctrl_pcie: pciegrp { 623 fsl,pins = < 624 MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 625 MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x4001b0b0 /* PCIESKT_WDIS# */ 626 >; 627 }; 628 629 pinctrl_pmic: pmicgrp { 630 fsl,pins = < 631 MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */ 632 >; 633 }; 634 635 pinctrl_pps: ppsgrp { 636 fsl,pins = < 637 MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 638 >; 639 }; 640 641 pinctrl_pwm2: pwm2grp { 642 fsl,pins = < 643 MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 644 >; 645 }; 646 647 pinctrl_pwm3: pwm3grp { 648 fsl,pins = < 649 MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 650 >; 651 }; 652 653 pinctrl_pwm4: pwm4grp { 654 fsl,pins = < 655 MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 656 >; 657 }; 658 659 pinctrl_uart2: uart2grp { 660 fsl,pins = < 661 MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 662 MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 663 >; 664 }; 665 666 pinctrl_uart3: uart3grp { 667 fsl,pins = < 668 MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 669 MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 670 >; 671 }; 672 673 pinctrl_uart4: uart4grp { 674 fsl,pins = < 675 MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 676 MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 677 >; 678 }; 679 680 pinctrl_uart5: uart5grp { 681 fsl,pins = < 682 MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 683 MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 684 >; 685 }; 686 687 pinctrl_usbotg: usbotggrp { 688 fsl,pins = < 689 MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 690 MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* OTG_PWR_EN */ 691 >; 692 }; 693 694 pinctrl_usdhc3: usdhc3grp { 695 fsl,pins = < 696 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 697 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 698 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 699 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 700 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 701 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 702 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* CD */ 703 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x17059 704 >; 705 }; 706 707 pinctrl_usdhc3_100mhz: usdhc3grp100mhz { 708 fsl,pins = < 709 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 710 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9 711 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 712 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 713 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 714 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 715 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170b9 /* CD */ 716 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170b9 717 >; 718 }; 719 720 pinctrl_usdhc3_200mhz: usdhc3grp200mhz { 721 fsl,pins = < 722 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 723 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 724 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 725 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 726 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 727 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 728 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170f9 /* CD */ 729 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170f9 730 >; 731 }; 732 733 pinctrl_wdog: wdoggrp { 734 fsl,pins = < 735 MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0 736 >; 737 }; 738}; 739