1// SPDX-License-Identifier: GPL-2.0+ OR MIT 2// 3// Device Tree Source for UniPhier sLD8 SoC 4// 5// Copyright (C) 2015-2016 Socionext Inc. 6// Author: Masahiro Yamada <yamada.masahiro@socionext.com> 7 8#include <dt-bindings/gpio/uniphier-gpio.h> 9 10/ { 11 compatible = "socionext,uniphier-sld8"; 12 #address-cells = <1>; 13 #size-cells = <1>; 14 15 cpus { 16 #address-cells = <1>; 17 #size-cells = <0>; 18 19 cpu@0 { 20 device_type = "cpu"; 21 compatible = "arm,cortex-a9"; 22 reg = <0>; 23 enable-method = "psci"; 24 next-level-cache = <&l2>; 25 }; 26 }; 27 28 psci { 29 compatible = "arm,psci-0.2"; 30 method = "smc"; 31 }; 32 33 clocks { 34 refclk: ref { 35 compatible = "fixed-clock"; 36 #clock-cells = <0>; 37 clock-frequency = <25000000>; 38 }; 39 40 arm_timer_clk: arm-timer { 41 #clock-cells = <0>; 42 compatible = "fixed-clock"; 43 clock-frequency = <50000000>; 44 }; 45 }; 46 47 soc { 48 compatible = "simple-bus"; 49 #address-cells = <1>; 50 #size-cells = <1>; 51 ranges; 52 interrupt-parent = <&intc>; 53 54 l2: cache-controller@500c0000 { 55 compatible = "socionext,uniphier-system-cache"; 56 reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, 57 <0x506c0000 0x400>; 58 interrupts = <0 174 4>, <0 175 4>; 59 cache-unified; 60 cache-size = <(256 * 1024)>; 61 cache-sets = <256>; 62 cache-line-size = <128>; 63 cache-level = <2>; 64 }; 65 66 spi: spi@54006000 { 67 compatible = "socionext,uniphier-scssi"; 68 status = "disabled"; 69 reg = <0x54006000 0x100>; 70 #address-cells = <1>; 71 #size-cells = <0>; 72 interrupts = <0 39 4>; 73 pinctrl-names = "default"; 74 pinctrl-0 = <&pinctrl_spi0>; 75 clocks = <&peri_clk 11>; 76 resets = <&peri_rst 11>; 77 }; 78 79 serial0: serial@54006800 { 80 compatible = "socionext,uniphier-uart"; 81 status = "disabled"; 82 reg = <0x54006800 0x40>; 83 interrupts = <0 33 4>; 84 pinctrl-names = "default"; 85 pinctrl-0 = <&pinctrl_uart0>; 86 clocks = <&peri_clk 0>; 87 resets = <&peri_rst 0>; 88 }; 89 90 serial1: serial@54006900 { 91 compatible = "socionext,uniphier-uart"; 92 status = "disabled"; 93 reg = <0x54006900 0x40>; 94 interrupts = <0 35 4>; 95 pinctrl-names = "default"; 96 pinctrl-0 = <&pinctrl_uart1>; 97 clocks = <&peri_clk 1>; 98 resets = <&peri_rst 1>; 99 }; 100 101 serial2: serial@54006a00 { 102 compatible = "socionext,uniphier-uart"; 103 status = "disabled"; 104 reg = <0x54006a00 0x40>; 105 interrupts = <0 37 4>; 106 pinctrl-names = "default"; 107 pinctrl-0 = <&pinctrl_uart2>; 108 clocks = <&peri_clk 2>; 109 resets = <&peri_rst 2>; 110 }; 111 112 serial3: serial@54006b00 { 113 compatible = "socionext,uniphier-uart"; 114 status = "disabled"; 115 reg = <0x54006b00 0x40>; 116 interrupts = <0 29 4>; 117 pinctrl-names = "default"; 118 pinctrl-0 = <&pinctrl_uart3>; 119 clocks = <&peri_clk 3>; 120 resets = <&peri_rst 3>; 121 }; 122 123 gpio: gpio@55000000 { 124 compatible = "socionext,uniphier-gpio"; 125 reg = <0x55000000 0x200>; 126 interrupt-parent = <&aidet>; 127 interrupt-controller; 128 #interrupt-cells = <2>; 129 gpio-controller; 130 #gpio-cells = <2>; 131 gpio-ranges = <&pinctrl 0 0 0>, 132 <&pinctrl 104 0 0>, 133 <&pinctrl 112 0 0>; 134 gpio-ranges-group-names = "gpio_range0", 135 "gpio_range1", 136 "gpio_range2"; 137 ngpios = <136>; 138 socionext,interrupt-ranges = <0 48 13>, <14 62 2>; 139 }; 140 141 i2c0: i2c@58400000 { 142 compatible = "socionext,uniphier-i2c"; 143 status = "disabled"; 144 reg = <0x58400000 0x40>; 145 #address-cells = <1>; 146 #size-cells = <0>; 147 interrupts = <0 41 1>; 148 pinctrl-names = "default"; 149 pinctrl-0 = <&pinctrl_i2c0>; 150 clocks = <&peri_clk 4>; 151 resets = <&peri_rst 4>; 152 clock-frequency = <100000>; 153 }; 154 155 i2c1: i2c@58480000 { 156 compatible = "socionext,uniphier-i2c"; 157 status = "disabled"; 158 reg = <0x58480000 0x40>; 159 #address-cells = <1>; 160 #size-cells = <0>; 161 interrupts = <0 42 1>; 162 pinctrl-names = "default"; 163 pinctrl-0 = <&pinctrl_i2c1>; 164 clocks = <&peri_clk 5>; 165 resets = <&peri_rst 5>; 166 clock-frequency = <100000>; 167 }; 168 169 /* chip-internal connection for DMD */ 170 i2c2: i2c@58500000 { 171 compatible = "socionext,uniphier-i2c"; 172 reg = <0x58500000 0x40>; 173 #address-cells = <1>; 174 #size-cells = <0>; 175 interrupts = <0 43 1>; 176 pinctrl-names = "default"; 177 pinctrl-0 = <&pinctrl_i2c2>; 178 clocks = <&peri_clk 6>; 179 resets = <&peri_rst 6>; 180 clock-frequency = <400000>; 181 }; 182 183 i2c3: i2c@58580000 { 184 compatible = "socionext,uniphier-i2c"; 185 status = "disabled"; 186 reg = <0x58580000 0x40>; 187 #address-cells = <1>; 188 #size-cells = <0>; 189 interrupts = <0 44 1>; 190 pinctrl-names = "default"; 191 pinctrl-0 = <&pinctrl_i2c3>; 192 clocks = <&peri_clk 7>; 193 resets = <&peri_rst 7>; 194 clock-frequency = <100000>; 195 }; 196 197 system_bus: system-bus@58c00000 { 198 compatible = "socionext,uniphier-system-bus"; 199 status = "disabled"; 200 reg = <0x58c00000 0x400>; 201 #address-cells = <2>; 202 #size-cells = <1>; 203 pinctrl-names = "default"; 204 pinctrl-0 = <&pinctrl_system_bus>; 205 }; 206 207 smpctrl@59801000 { 208 compatible = "socionext,uniphier-smpctrl"; 209 reg = <0x59801000 0x400>; 210 }; 211 212 mioctrl@59810000 { 213 compatible = "socionext,uniphier-sld8-mioctrl", 214 "simple-mfd", "syscon"; 215 reg = <0x59810000 0x800>; 216 217 mio_clk: clock { 218 compatible = "socionext,uniphier-sld8-mio-clock"; 219 #clock-cells = <1>; 220 }; 221 222 mio_rst: reset { 223 compatible = "socionext,uniphier-sld8-mio-reset"; 224 #reset-cells = <1>; 225 }; 226 }; 227 228 perictrl@59820000 { 229 compatible = "socionext,uniphier-sld8-perictrl", 230 "simple-mfd", "syscon"; 231 reg = <0x59820000 0x200>; 232 233 peri_clk: clock { 234 compatible = "socionext,uniphier-sld8-peri-clock"; 235 #clock-cells = <1>; 236 }; 237 238 peri_rst: reset { 239 compatible = "socionext,uniphier-sld8-peri-reset"; 240 #reset-cells = <1>; 241 }; 242 }; 243 244 dmac: dma-controller@5a000000 { 245 compatible = "socionext,uniphier-mio-dmac"; 246 reg = <0x5a000000 0x1000>; 247 interrupts = <0 68 4>, <0 68 4>, <0 69 4>, <0 70 4>, 248 <0 71 4>, <0 72 4>, <0 73 4>; 249 clocks = <&mio_clk 7>; 250 resets = <&mio_rst 7>; 251 #dma-cells = <1>; 252 }; 253 254 sd: mmc@5a400000 { 255 compatible = "socionext,uniphier-sd-v2.91"; 256 status = "disabled"; 257 reg = <0x5a400000 0x200>; 258 interrupts = <0 76 4>; 259 pinctrl-names = "default", "uhs"; 260 pinctrl-0 = <&pinctrl_sd>; 261 pinctrl-1 = <&pinctrl_sd_uhs>; 262 clocks = <&mio_clk 0>; 263 reset-names = "host", "bridge"; 264 resets = <&mio_rst 0>, <&mio_rst 3>; 265 dma-names = "rx-tx"; 266 dmas = <&dmac 4>; 267 bus-width = <4>; 268 cap-sd-highspeed; 269 sd-uhs-sdr12; 270 sd-uhs-sdr25; 271 sd-uhs-sdr50; 272 }; 273 274 emmc: mmc@5a500000 { 275 compatible = "socionext,uniphier-sd-v2.91"; 276 status = "disabled"; 277 reg = <0x5a500000 0x200>; 278 interrupts = <0 78 4>; 279 pinctrl-names = "default"; 280 pinctrl-0 = <&pinctrl_emmc>; 281 clocks = <&mio_clk 1>; 282 reset-names = "host", "bridge", "hw"; 283 resets = <&mio_rst 1>, <&mio_rst 4>, <&mio_rst 6>; 284 dma-names = "rx-tx"; 285 dmas = <&dmac 6>; 286 bus-width = <8>; 287 cap-mmc-highspeed; 288 cap-mmc-hw-reset; 289 non-removable; 290 }; 291 292 usb0: usb@5a800100 { 293 compatible = "socionext,uniphier-ehci", "generic-ehci"; 294 status = "disabled"; 295 reg = <0x5a800100 0x100>; 296 interrupts = <0 80 4>; 297 pinctrl-names = "default"; 298 pinctrl-0 = <&pinctrl_usb0>; 299 clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 8>, 300 <&mio_clk 12>; 301 resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>, 302 <&mio_rst 12>; 303 has-transaction-translator; 304 }; 305 306 usb1: usb@5a810100 { 307 compatible = "socionext,uniphier-ehci", "generic-ehci"; 308 status = "disabled"; 309 reg = <0x5a810100 0x100>; 310 interrupts = <0 81 4>; 311 pinctrl-names = "default"; 312 pinctrl-0 = <&pinctrl_usb1>; 313 clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 9>, 314 <&mio_clk 13>; 315 resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>, 316 <&mio_rst 13>; 317 has-transaction-translator; 318 }; 319 320 usb2: usb@5a820100 { 321 compatible = "socionext,uniphier-ehci", "generic-ehci"; 322 status = "disabled"; 323 reg = <0x5a820100 0x100>; 324 interrupts = <0 82 4>; 325 pinctrl-names = "default"; 326 pinctrl-0 = <&pinctrl_usb2>; 327 clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 10>, 328 <&mio_clk 14>; 329 resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 10>, 330 <&mio_rst 14>; 331 has-transaction-translator; 332 }; 333 334 soc-glue@5f800000 { 335 compatible = "socionext,uniphier-sld8-soc-glue", 336 "simple-mfd", "syscon"; 337 reg = <0x5f800000 0x2000>; 338 339 pinctrl: pinctrl { 340 compatible = "socionext,uniphier-sld8-pinctrl"; 341 }; 342 }; 343 344 soc-glue@5f900000 { 345 compatible = "socionext,uniphier-sld8-soc-glue-debug", 346 "simple-mfd"; 347 #address-cells = <1>; 348 #size-cells = <1>; 349 ranges = <0 0x5f900000 0x2000>; 350 351 efuse@100 { 352 compatible = "socionext,uniphier-efuse"; 353 reg = <0x100 0x28>; 354 }; 355 356 efuse@200 { 357 compatible = "socionext,uniphier-efuse"; 358 reg = <0x200 0x14>; 359 }; 360 }; 361 362 timer@60000200 { 363 compatible = "arm,cortex-a9-global-timer"; 364 reg = <0x60000200 0x20>; 365 interrupts = <1 11 0x104>; 366 clocks = <&arm_timer_clk>; 367 }; 368 369 timer@60000600 { 370 compatible = "arm,cortex-a9-twd-timer"; 371 reg = <0x60000600 0x20>; 372 interrupts = <1 13 0x104>; 373 clocks = <&arm_timer_clk>; 374 }; 375 376 intc: interrupt-controller@60001000 { 377 compatible = "arm,cortex-a9-gic"; 378 reg = <0x60001000 0x1000>, 379 <0x60000100 0x100>; 380 #interrupt-cells = <3>; 381 interrupt-controller; 382 }; 383 384 aidet: interrupt-controller@61830000 { 385 compatible = "socionext,uniphier-sld8-aidet"; 386 reg = <0x61830000 0x200>; 387 interrupt-controller; 388 #interrupt-cells = <2>; 389 }; 390 391 sysctrl@61840000 { 392 compatible = "socionext,uniphier-sld8-sysctrl", 393 "simple-mfd", "syscon"; 394 reg = <0x61840000 0x10000>; 395 396 sys_clk: clock { 397 compatible = "socionext,uniphier-sld8-clock"; 398 #clock-cells = <1>; 399 }; 400 401 sys_rst: reset { 402 compatible = "socionext,uniphier-sld8-reset"; 403 #reset-cells = <1>; 404 }; 405 }; 406 407 nand: nand-controller@68000000 { 408 compatible = "socionext,uniphier-denali-nand-v5a"; 409 status = "disabled"; 410 reg-names = "nand_data", "denali_reg"; 411 reg = <0x68000000 0x20>, <0x68100000 0x1000>; 412 interrupts = <0 65 4>; 413 pinctrl-names = "default"; 414 pinctrl-0 = <&pinctrl_nand2cs>; 415 clock-names = "nand", "nand_x", "ecc"; 416 clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>; 417 reset-names = "nand", "reg"; 418 resets = <&sys_rst 2>, <&sys_rst 2>; 419 }; 420 }; 421}; 422 423#include "uniphier-pinctrl.dtsi" 424