1 /* 2 * (C) Copyright 2009 3 * Heiko Schocher, DENX Software Engineering, hs@denx.de. 4 * 5 * SPDX-License-Identifier: GPL-2.0+ 6 */ 7 8 #ifndef __MANROLAND_COMMON_H 9 #define __MANROLAND_COMMON_H 10 11 /* 12 * High Level Configuration Options 13 * (easy to change) 14 */ 15 16 #define CONFIG_BOARD_EARLY_INIT_R 17 18 /* Partitions */ 19 #define CONFIG_DOS_PARTITION 20 21 /* 22 * Command line configuration. 23 */ 24 #define CONFIG_CMD_DATE 25 #define CONFIG_CMD_DISPLAY 26 #define CONFIG_CMD_DHCP 27 #define CONFIG_CMD_PING 28 #define CONFIG_CMD_EEPROM 29 #define CONFIG_CMD_I2C 30 #define CONFIG_CMD_DTT 31 #define CONFIG_CMD_IDE 32 #define CONFIG_CMD_FAT 33 #define CONFIG_CMD_MII 34 #define CONFIG_CMD_SNTP 35 36 /* 37 * 8-symbol LED display (can be accessed with 'display' command) 38 */ 39 #define CONFIG_PDSP188x 40 41 #define CONFIG_TIMESTAMP 1 /* Print image info with timestamp */ 42 43 /* 44 * Autobooting 45 */ 46 #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ 47 48 #define CONFIG_PREBOOT "echo;" \ 49 "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \ 50 "echo" 51 52 #undef CONFIG_BOOTARGS 53 54 #define CONFIG_EXTRA_ENV_SETTINGS \ 55 "netdev=eth0\0" \ 56 "nfsargs=setenv bootargs root=/dev/nfs rw " \ 57 "nfsroot=${serverip}:${rootpath}\0" \ 58 "ramargs=setenv bootargs root=/dev/ram rw\0" \ 59 "addwdt=setenv bootargs ${bootargs} wdt=off\0" \ 60 "logval=4\0" \ 61 "addlog=setenv bootargs ${bootargs} loglevel=${logval}\0" \ 62 "addip=setenv bootargs ${bootargs} " \ 63 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ 64 ":${hostname}:${netdev}:off panic=1\0" \ 65 "kernel_addr=ff810000\0" \ 66 "fdt_addr="__stringify(CONFIG_SYS_FLASH_BASE)"\0" \ 67 "flash_nfs=run nfsargs addip addcon addwdt addlog;" \ 68 "bootm ${kernel_addr} - ${fdt_addr}\0" \ 69 "rootpath=/opt/eldk/ppc_82xx\0" \ 70 "kernel_addr_r=300000\0" \ 71 "fdt_addr_r=200000\0" \ 72 "fdt_file=" __stringify(CONFIG_HOSTNAME) "/" \ 73 __stringify(CONFIG_HOSTNAME) ".dtb\0" \ 74 "kernel_file=" __stringify(CONFIG_HOSTNAME) "/uImage \0" \ 75 "load_fdt=tftp ${fdt_addr_r} ${fdt_file};\0" \ 76 "load_kernel=tftp ${kernel_addr_r} ${kernel_file};\0" \ 77 "addcon=setenv bootargs ${bootargs} console=ttyPSC0,${baudrate}\0"\ 78 "net_nfs=run load_fdt load_kernel; " \ 79 "run nfsargs addip addcon addwdt addlog;" \ 80 "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \ 81 "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin \0" \ 82 "u-boot_addr_r=200000\0" \ 83 "load=tftp ${u-boot_addr_r} ${u-boot}\0" \ 84 "update=protect off " __stringify(CONFIG_SYS_TEXT_BASE) " +${filesize};"\ 85 "erase " __stringify(CONFIG_SYS_TEXT_BASE) " +${filesize};"\ 86 "cp.b ${u-boot_addr_r} " __stringify(CONFIG_SYS_TEXT_BASE) \ 87 " ${filesize};" \ 88 "protect on " __stringify(CONFIG_SYS_TEXT_BASE) " +${filesize}\0"\ 89 "" 90 91 #define CONFIG_BOOTCOMMAND "run net_nfs" 92 93 #define CONFIG_MISC_INIT_R 1 94 95 /* 96 * Miscellaneous configurable options 97 */ 98 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 99 #if defined(CONFIG_CMD_KGDB) 100 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 101 #else 102 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 103 #endif 104 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) 105 #define CONFIG_SYS_MAXARGS 16 /* max number of command args*/ 106 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 107 #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ 108 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 109 110 /* Enable an alternate, more extensive memory test */ 111 #define CONFIG_SYS_ALT_MEMTEST 112 113 /* 114 * Enable loopw command. 115 */ 116 #define CONFIG_LOOPW 117 118 /* pass open firmware flat tree */ 119 #define CONFIG_OF_LIBFDT 1 120 #define CONFIG_OF_BOARD_SETUP 1 121 122 #endif /* __MANROLAND_COMMON_H */ 123