1# 2# $FreeBSD: src/Makefile.inc1,v 1.141.2.62 2003/04/06 19:54:00 dwmalone Exp $ 3# $DragonFly: src/Makefile.inc1,v 1.118 2008/06/24 20:22:30 thomas Exp $ 4# 5# Build-time options are documented in make.conf(5). 6# 7# The intended user-driven targets are: 8# 9# buildworld - rebuild *everything*, including glue to help do upgrades 10# quickworld - skip the glue and do a depend+build on the meat 11# realquickworld - skip the glue and depend stages and just build the meat 12# crossworld - only build the glue (particularly the cross-build environment) 13# installworld- install everything built by "buildworld" 14# most - build user commands, no libraries or include files 15# installmost - install user commands, no libraries or include files 16# 17# Standard targets (not defined here) are documented in the makefiles in 18# /usr/share/mk. These include: 19# obj depend all install clean cleandepend cleanobj 20 21# Put initial settings here. 22SUBDIR= 23 24# We must do share/info early so that installation of info `dir' 25# entries works correctly. Do it first since it is less likely to 26# grow dependencies on include and lib than vice versa. 27.if exists(${.CURDIR}/share/info) 28SUBDIR+= share/info 29.endif 30 31# We must do include and lib early so that the perl *.ph generation 32# works correctly as it uses the header files installed by this. 33.if exists(${.CURDIR}/include) 34SUBDIR+= include 35.endif 36.if exists(${.CURDIR}/lib) 37SUBDIR+= lib 38.endif 39# This exists simply to ensure that the obj dir hierarchy is 40# intact for nrelease, allowing the nrelease Makefile's to 41# reference ${.OBJDIR}. 42# 43.if exists(${.CURDIR}/nrelease) 44SUBDIR+= nrelease 45.endif 46 47.if exists(${.CURDIR}/bin) 48SUBDIR+= bin 49.endif 50.if exists(${.CURDIR}/games) && !defined(NO_GAMES) 51SUBDIR+= games 52.endif 53.if exists(${.CURDIR}/gnu) 54SUBDIR+= gnu 55.endif 56.if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \ 57 !defined(NO_CRYPT) && !defined(NO_OPENSSL) && defined(WANT_KERBEROS) 58SUBDIR+= kerberos5 59.endif 60.if exists(${.CURDIR}/libexec) 61SUBDIR+= libexec 62.endif 63.if exists(${.CURDIR}/sbin) 64SUBDIR+= sbin 65.endif 66.if exists(${.CURDIR}/secure) && !defined(NO_CRYPT) 67SUBDIR+= secure 68.endif 69.if exists(${.CURDIR}/share) && !defined(NO_SHARE) 70SUBDIR+= share 71.endif 72.if exists(${.CURDIR}/sys) 73SUBDIR+= sys 74.endif 75.if exists(${.CURDIR}/usr.bin) 76SUBDIR+= usr.bin 77.endif 78.if exists(${.CURDIR}/usr.sbin) 79SUBDIR+= usr.sbin 80.endif 81 82# etc must be last for "distribute" to work 83.if exists(${.CURDIR}/etc) 84SUBDIR+= etc 85.endif 86 87# These are last, since it is nice to at least get the base system 88# rebuilt before you do them. 89.if defined(LOCAL_DIRS) 90.for _DIR in ${LOCAL_DIRS} 91.if exists(${.CURDIR}/${_DIR}) & exists(${.CURDIR}/${_DIR}/Makefile) 92SUBDIR+= ${_DIR} 93.endif 94.endfor 95.endif 96 97.if defined(SUBDIR_OVERRIDE) 98SUBDIR= ${SUBDIR_OVERRIDE} 99.endif 100 101.if defined(NOCLEANDIR) 102CLEANDIR= clean cleandepend 103.else 104CLEANDIR= cleandir 105.endif 106 107.if defined(NO_CLEAN) 108NOCLEAN= # defined 109.endif 110 111# Object directory base in primary make. Note that when we rerun make 112# from inside this file we change MAKEOBJDIRPREFIX to the appropriate 113# subdirectory because the rest of the build system needs it that way. 114# The original object directory base is saved in OBJTREE. 115# 116MAKEOBJDIRPREFIX?= /usr/obj 117OBJTREE?= ${MAKEOBJDIRPREFIX} 118 119# Used for stage installs and pathing 120# 121DESTDIRBASE?= ${OBJTREE}${.CURDIR} 122 123# Remove DESTDIR from MAKEFLAGS. It is present in the environment 124# anyhow, and we need to be able to override it for stage installs 125.MAKEFLAGS:= ${.MAKEFLAGS:NDESTDIR=*} 126 127# This sets the compiler we use to build the world/kernel with 128WORLD_CCVER?= gcc41 129 130TARGET_ARCH?= ${MACHINE_ARCH} 131.if ${TARGET_ARCH} == ${MACHINE_ARCH} 132TARGET?= ${MACHINE} 133.else 134TARGET?= ${TARGET_ARCH} 135.endif 136.if make(buildworld) 137BUILD_ARCH!= sysctl -n hw.machine_arch 138.if ${MACHINE_ARCH} != ${BUILD_ARCH} 139.error To cross-build, set TARGET_ARCH. 140.endif 141.endif 142 143# Backwards compatibility with older make's or older sys.mk's. make 144# is expected to define MACHINE_PLATFORM. 145# 146.if !defined(MACHINE_PLATFORM) 147MACHINE_PLATFORM= pc32 148.endif 149 150# XXX this is ugly and we need to come up with a nicer solution 151.if !defined(TARGET_PLATFORM) 152.if ${TARGET_ARCH} == "i386" 153TARGET_PLATFORM= pc32 154.elif ${TARGET_ARCH} == "amd64" 155TARGET_PLATFORM= pc64 156.else 157.error Unknown target architecture. 158.endif 159.endif 160 161THREAD_LIB?= thread_xu 162.if ${THREAD_LIB} == "c_r" 163.if defined(NO_LIBC_R) 164.error libc_r is chosen as the default thread library, but NO_LIBC_R is defined 165.endif 166.endif 167 168# BTOOLS (Natively built) All non-cross-development tools that the 169# main build needs. This includes things like 'mkdir' and 'rm'. 170# We will not use the native system's exec path once we start 171# on WORLD. (bootstrap-tools and build-tools or BTOOLS) 172# 173# CTOOLS (Natively built) Cross development tools which are specific 174# to the target architecture. 175# 176# WORLD (Cross built) Our ultimate buildworld, using only BTOOLS and 177# CTOOLS. 178# 179# MACHINE_PLATFORM Platform Architecture we are building on 180# MACHINE Machine Architecture (usually the same as MACHINE_ARCH) 181# MACHINE_ARCH Cpu Architecture we are building on 182# 183# TARGET_PLATFORM Platform Architecture we are building for 184# TARGET Machine Architecture we are building for 185# TARGET_ARCH Cpu Architecture we are building for 186# 187BTOOLSDEST= ${DESTDIRBASE}/btools_${MACHINE_ARCH} 188CTOOLSDEST= ${DESTDIRBASE}/ctools_${MACHINE_ARCH}_${TARGET_ARCH} 189WORLDDEST= ${DESTDIRBASE}/world_${TARGET_ARCH} 190 191# The bootstrap-tools path is used by the bootstrap-tools, build-tools, and 192# cross-tools stages to augment the existing command path to access newer 193# versions of certain utilities such as 'patch' that the cross-tools stage 194# might expect. 195# 196BTOOLSPATH= ${BTOOLSDEST}/usr/sbin:${BTOOLSDEST}/usr/bin:${BTOOLSDEST}/bin:${BTOOLSDEST}/usr/games 197 198# The strict temporary command path contains all binaries required 199# by the buildworld system after the cross-tools stage. 200# 201STRICTTMPPATH= ${CTOOLSDEST}/usr/sbin:${CTOOLSDEST}/usr/bin:${CTOOLSDEST}/bin:${CTOOLSDEST}/usr/games:${BTOOLSDEST}/usr/sbin:${BTOOLSDEST}/usr/bin:${BTOOLSDEST}/bin:${BTOOLSDEST}/usr/games 202 203TMPDIR?= /tmp 204TMPPID!= echo $$$$ 205 206# 207# Building a world goes through the following stages 208# 209# 1. bootstrap-tool stage [BMAKE] 210# This stage is responsible for creating programs that 211# are needed for backward compatibility reasons. They 212# are not built as cross-tools. 213# 2. build-tool stage [TMAKE] 214# This stage is responsible for creating the object 215# tree and building any tools that are needed during 216# the build process. 217# 3. cross-tool stage [XMAKE] 218# This stage is responsible for creating any tools that 219# are needed for cross-builds. A cross-compiler is one 220# of them. 221# 4. world stage [WMAKE] 222# This stage actually builds the world. 223# 5. install stage (optional) [IMAKE] 224# This stage installs a previously built world. 225# 226 227# bootstrap-tool stage 228# 229BMAKEENV= MAKEOBJDIRPREFIX=${BTOOLSDEST} \ 230 OBJTREE=${OBJTREE} \ 231 DESTDIR=${BTOOLSDEST} \ 232 PATH=${BTOOLSPATH}:${PATH} \ 233 INSTALL="sh ${.CURDIR}/tools/install.sh" 234 235BMAKE= ${BMAKEENV} ${MAKE} -f Makefile.inc1 -DBOOTSTRAPPING \ 236 -DNOINFO -DNOMAN -DNOPIC -DNOPROFILE -DNOSHARED \ 237 -DNO_WERROR -DNO_NLS 238 239# build-tool stage 240# 241TMAKEENV= MAKEOBJDIRPREFIX=${BTOOLSDEST} \ 242 OBJTREE=${OBJTREE} \ 243 DESTDIR= \ 244 PATH=${BTOOLSPATH}:${PATH} \ 245 INSTALL="sh ${.CURDIR}/tools/install.sh" 246 247TMAKE= ${TMAKEENV} ${MAKE} -f Makefile.inc1 -DBOOTSTRAPPING \ 248 -DNO_FORTRAN -DNOSHARED 249 250# cross-tool stage 251# 252# note: TOOLS_PREFIX points to the obj root holding the cross 253# compiler binaries, while USRDATA_PREFIX points to the obj root 254# holding the target environment (and also determines where cross-built 255# libraries, crt*.o, and include files are installed). 256# 257XMAKEENV= MAKEOBJDIRPREFIX=${CTOOLSDEST} \ 258 OBJTREE=${OBJTREE} \ 259 DESTDIR=${CTOOLSDEST} \ 260 INSTALL="sh ${.CURDIR}/tools/install.sh" \ 261 TOOLS_PREFIX=${CTOOLSDEST} \ 262 USRDATA_PREFIX=${WORLDDEST} \ 263 PATH=${BTOOLSPATH}:${PATH} 264 265XMAKE= ${XMAKEENV} ${MAKE} -f Makefile.inc1 -DNO_FORTRAN -DNO_GDB \ 266 -DBOOTSTRAPPING -DNOSHARED 267 268# world stage, note the strict path and note that TOOLS_PREFIX is left 269# unset and USRDATA_PREFIX (which defaults to TOOLS_PREFIX) is set to empty, 270# which is primarily for the compiler so it targets / (e.g. /usr/<blah>) 271# for both binary and library paths, even though it is being compiled to 272# WORLDDEST. None of the programs in the world stage are ever actually 273# executed during the buildworld/installworld. 274# 275CROSSENV= MAKEOBJDIRPREFIX=${WORLDDEST} \ 276 OBJTREE=${OBJTREE} \ 277 MACHINE_ARCH=${TARGET_ARCH} \ 278 MACHINE=${TARGET} \ 279 MACHINE_PLATFORM=${TARGET_PLATFORM} \ 280 OBJFORMAT_PATH=${CTOOLSDEST} \ 281 HOST_CCVER=${HOST_CCVER} \ 282 CCVER=${WORLD_CCVER} 283 284WMAKEENV= ${CROSSENV} \ 285 DESTDIR=${WORLDDEST} \ 286 INSTALL="sh ${.CURDIR}/tools/install.sh" \ 287 PATH=${STRICTTMPPATH} 288 289WMAKE= ${WMAKEENV} ${MAKE} -f Makefile.inc1 290 291# install stage 292# 293IMAKEENV= ${CROSSENV} \ 294 PATH=${STRICTTMPPATH} 295IMAKE= ${IMAKEENV} ${MAKE} -f Makefile.inc1 296 297# kernel stage 298# 299KMAKEENV= ${WMAKEENV} 300 301# buildworld 302# 303# Attempt to rebuild the entire system, with reasonable chance of 304# success, regardless of how old your existing system is. 305# 306_worldtmp: 307 @echo 308 @echo "--------------------------------------------------------------" 309 @echo ">>> Rebuilding the temporary build tree" 310 @echo "--------------------------------------------------------------" 311.if !defined(NOCLEAN) 312 rm -rf ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST} 313.else 314 # XXX - These two can depend on any header file. 315 rm -f ${OBJTREE}${.CURDIR}/usr.bin/kdump/ioctl.c 316 rm -f ${OBJTREE}${.CURDIR}/usr.bin/truss/ioctl.c 317.endif 318 mkdir -p ${DESTDIRBASE} ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST} 319.for _dir in ${WORLDDEST} ${BTOOLSDEST} ${CTOOLSDEST} 320 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.root.dist \ 321 -p ${_dir}/ > /dev/null 322 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.usr.dist \ 323 -p ${_dir}/usr > /dev/null 324.endfor 325 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.include.dist \ 326 -p ${WORLDDEST}/usr/include > /dev/null 327 ${LN} -sf ${.CURDIR}/sys ${WORLDDEST} 328 329_bootstrap-tools: 330 @echo 331 @echo "--------------------------------------------------------------" 332 @echo ">>> stage 1: bootstrap tools" 333 @echo "--------------------------------------------------------------" 334 cd ${.CURDIR}; ${BMAKE} bootstrap-tools 335_cleanobj: 336 @echo 337 @echo "--------------------------------------------------------------" 338 @echo ">>> stage 2a: cleaning up the object tree" 339 @echo "--------------------------------------------------------------" 340 cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/} 341_obj: 342 @echo 343 @echo "--------------------------------------------------------------" 344 @echo ">>> stage 2b: rebuilding the object tree" 345 @echo "--------------------------------------------------------------" 346 cd ${.CURDIR}; ${WMAKE} par-obj 347_build-tools: 348 @echo 349 @echo "--------------------------------------------------------------" 350 @echo ">>> stage 2c: build tools" 351 @echo "--------------------------------------------------------------" 352 cd ${.CURDIR}; ${TMAKE} build-tools 353_cross-tools: 354 @echo 355 @echo "--------------------------------------------------------------" 356 @echo ">>> stage 3: cross tools" 357 @echo "--------------------------------------------------------------" 358 cd ${.CURDIR}; ${XMAKE} cross-tools 359_includes: 360 @echo 361 @echo "--------------------------------------------------------------" 362 @echo ">>> stage 4a: populating ${WORLDDEST}/usr/include" 363 @echo "--------------------------------------------------------------" 364 cd ${.CURDIR}; ${WMAKE} SHARED=symlinks par-includes 365_libraries: 366 @echo 367 @echo "--------------------------------------------------------------" 368 @echo ">>> stage 4b: building libraries" 369 @echo "--------------------------------------------------------------" 370 cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOINFO -DNOMAN -DNOFSCHG libraries 371_depend: 372 @echo 373 @echo "--------------------------------------------------------------" 374 @echo ">>> stage 4c: make dependencies" 375 @echo "--------------------------------------------------------------" 376 cd ${.CURDIR}; ${WMAKE} par-depend 377everything: 378 @echo 379 @echo "--------------------------------------------------------------" 380 @echo ">>> stage 4d: building everything.." 381 @echo "--------------------------------------------------------------" 382 cd ${.CURDIR}; ${WMAKE} all 383 384# note: buildworld no longer depends on _cleanobj because we rm -rf the 385# entire object tree and built the bootstrap tools in a different location. 386# 387# buildworld - build everything from scratch 388# quickworld - skip the bootstrap, build, and cross-build steps 389# realquickworld - skip the bootstrap, build, crossbuild, and depend step. 390# 391# note: we include _obj in realquickworld to prevent accidental creation 392# of files in /usr/src. 393 394WMAKE_TGTS= 395.if !defined(SUBDIR_OVERRIDE) 396WMAKE_TGTS+= _worldtmp _bootstrap-tools 397.endif 398WMAKE_TGTS+= _obj _build-tools 399.if !defined(SUBDIR_OVERRIDE) 400WMAKE_TGTS+= _cross-tools 401.endif 402WMAKE_TGTS+= _includes _libraries _depend everything 403 404buildworld: ${WMAKE_TGTS} 405 406quickworld: _obj _includes _libraries _depend everything 407 408realquickworld: _obj _includes _libraries everything 409 410crossworld: _worldtmp _bootstrap-tools _obj _build-tools _cross-tools 411 412.ORDER: ${WMAKE_TGTS} 413 414# 415# installcheck 416# 417# Checks to be sure system is ready for installworld 418# 419installcheck: 420.if !defined(NO_SENDMAIL) 421 @pw usershow smmsp || (echo "You may need to run 'make preupgrade' first"; exit 1) 422 @pw groupshow smmsp || (echo "You may need to run 'make preupgrade' first"; exit 1) 423.endif 424 @pw usershow _pflogd || (echo "You may need to run 'make preupgrade' first"; exit 1) 425 @pw groupshow authpf || (echo "You may need to run 'make preupgrade' first"; exit 1) 426 @pw groupshow _pflogd || (echo "You may need to run 'make preupgrade' first"; exit 1) 427.if !defined(DESTDIR) || ${DESTDIR} == "" || ${DESTDIR} == "/" 428 @case `uname -r` in 1.2*|1.3-*|1.3.*|1.4.*|1.5.0-*|1.5.1-*|1.5.2-*|1.5.3-*) echo "You must upgrade your kernel to at least 1.5.4 and reboot before you can safely installworld, due to libc/system call ABI changes" ; exit 1;; esac 429.endif 430# distributeworld 431# 432# Distributes everything compiled by a `buildworld'. 433# 434# installworld 435# 436# Installs everything compiled by a 'buildworld'. 437# 438distributeworld installworld: installcheck 439 cd ${.CURDIR}; ${IMAKE} re${.TARGET:S/world$//} 440 ${INSTALL} -o root -g wheel -m 644 ${.CURDIR}/Makefile_upgrade.inc ${DESTDIR}/etc/upgrade/ 441 442# 443# reinstall 444# 445# If you have a build server, you can NFS mount the source and obj directories 446# and do a 'make reinstall' on the *client* to install new binaries from the 447# most recent server build. 448# 449reinstall: 450 @echo "--------------------------------------------------------------" 451 @echo ">>> Making hierarchy" 452 @echo "--------------------------------------------------------------" 453 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 hierarchy 454 @echo 455 @echo "--------------------------------------------------------------" 456 @echo ">>> Installing everything.." 457 @echo "--------------------------------------------------------------" 458 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install 459.if !defined(NOMAN) && !defined(NO_MAKEDB_RUN) 460 @echo 461 @echo "--------------------------------------------------------------" 462 @echo ">>> Rebuilding man page indices" 463 @echo "--------------------------------------------------------------" 464 cd ${.CURDIR}/share/man; ${MAKE} makedb 465.endif 466 467redistribute: 468 @echo "--------------------------------------------------------------" 469 @echo ">>> Distributing everything.." 470 @echo "--------------------------------------------------------------" 471 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 distribute 472 473# 474# buildkernel, nativekernel, quickkernel, and installkernel 475# 476# Which kernels to build and/or install is specified by setting 477# KERNCONF. If not defined a GENERIC kernel is built/installed. 478# Only the existing (depending TARGET) config files are used 479# for building kernels and only the first of these is designated 480# as the one being installed. 481# 482# You can specify INSTALLSTRIPPED=1 if you wish the installed 483# kernel and modules to be stripped of its debug info (required 484# symbols are left intact). You can specify INSTALLSTRIPPEDMODULES 485# if you only want to strip the modules of their debug info. These 486# only apply if you have DEBUG=-g in your kernel config or make line. 487# 488# Note that we have to use TARGET instead of TARGET_ARCH when 489# we're in kernel-land. Since only TARGET_ARCH is (expected) to 490# be set to cross-build, we have to make sure TARGET is set 491# properly. 492 493.if !defined(KERNCONF) && defined(KERNEL) 494KERNCONF= ${KERNEL} 495KERNWARN= yes 496.else 497KERNCONF?= GENERIC 498.endif 499INSTKERNNAME?= kernel 500 501KRNLSRCDIR= ${.CURDIR}/sys 502KRNLCONFDIR= ${KRNLSRCDIR}/config 503KRNLOBJDIR= ${OBJTREE}${KRNLSRCDIR} 504KERNCONFDIR?= ${KRNLCONFDIR} 505 506BUILDKERNELS= 507INSTALLKERNEL= 508.for _kernel in ${KERNCONF} 509.if exists(${KERNCONFDIR}/${_kernel}) 510BUILDKERNELS+= ${_kernel} 511.if empty(INSTALLKERNEL) 512INSTALLKERNEL= ${_kernel} 513.endif 514.endif 515.endfor 516 517# kernel version numbers survive rm -rf 518# 519.for _kernel in ${BUILDKERNELS} 520.if exists(${KRNLOBJDIR}/${_kernel}/version) 521KERNEL_VERSION_${_kernel} != cat ${KRNLOBJDIR}/${_kernel}/version 522.endif 523.endfor 524 525# 526# buildkernel 527# 528# Builds all kernels defined by BUILDKERNELS. 529# 530bk_tools: 531 @if [ ! -f ${WORLDDEST}/.libraries_done ]; then \ 532 echo "You must buildworld before buildkernel. If you wish"; \ 533 echo "to build a kernel using native tools, config it manually"; \ 534 echo "or use the nativekernel target if you are in a rush"; \ 535 exit 1; \ 536 fi 537 538maybe_bk_tools: 539.for _kernel in ${BUILDKERNELS} 540 @if [ ! -f ${KRNLOBJDIR}/${_kernel}/.nativekernel_run ]; then \ 541 if [ ! -f ${WORLDDEST}/.libraries_done ]; then \ 542 echo "The kernel was build using buildworld tools which no" ; \ 543 echo "longer appear to exist, quickkernel failed!" ; \ 544 exit 1; \ 545 fi; \ 546 fi 547.endfor 548 549bk_build_list: 550.if empty(BUILDKERNELS) 551 @echo ">>> ERROR: Missing kernel configuration file(s) (${KERNCONF})." 552 @echo ">>> Did you move your kernel configs from i386/conf to config/?" 553 @false 554.endif 555 556bk_kernwarn: 557.if defined(KERNWARN) 558 @echo "--------------------------------------------------------------" 559 @echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF=" 560 @echo "--------------------------------------------------------------" 561 @sleep 3 562.endif 563 @echo 564 565# The buildkernel target rebuilds the specified kernels from scratch 566# using the crossbuild tools generated by the last buildworld. It is 567# the safest (but also the most time consuming) way to build a new kernel. 568# 569buildkernel: bk_tools bk_build_list bk_kernwarn 570.for _kernel in ${BUILDKERNELS} 571 @echo "--------------------------------------------------------------" 572 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`" 573 @echo "--------------------------------------------------------------" 574 @echo "===> ${_kernel}" 575.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) 576 rm -rf ${KRNLOBJDIR}/${_kernel} 577.else 578 @if [ -f ${KRNLOBJDIR}/${_kernel}/.nativekernel_run ]; then \ 579 echo "YOU ARE REBUILDING WITH BUILDKERNEL, REMOVING OLD NATIVEKERNEL BUILD"; \ 580 rm -rf ${KRNLOBJDIR}/${_kernel}; fi 581.endif 582 mkdir -p ${KRNLOBJDIR} 583.if !defined(NO_KERNELCONFIG) 584 cd ${KRNLCONFDIR}; \ 585 PATH=${STRICTTMPPATH} \ 586 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \ 587 ${KERNCONFDIR}/${_kernel} 588.endif 589.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) && defined(KERNEL_VERSION_${_kernel}) 590 echo ${KERNEL_VERSION_${_kernel}} > ${KRNLOBJDIR}/${_kernel}/version 591.endif 592 touch ${KRNLOBJDIR}/${_kernel}/.buildkernel_run 593 cd ${KRNLOBJDIR}/${_kernel}; \ 594 MAKESRCPATH=${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm \ 595 ${MAKE} -DBOOTSTRAPPING -f ${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm/Makefile 596.if !defined(NO_KERNELDEPEND) 597 cd ${KRNLOBJDIR}/${_kernel}; \ 598 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} depend 599.endif 600 cd ${KRNLOBJDIR}/${_kernel}; \ 601 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all 602 @echo "--------------------------------------------------------------" 603 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`" 604 @echo "--------------------------------------------------------------" 605.endfor 606 607# The nativekernel target rebuilds the specified kernels from scratch 608# using the system's standard compiler rather than using the crossbuild 609# tools generated by the last buildworld. This is fairly safe if your 610# system is reasonable up-to-date. 611# 612nativekernel: bk_build_list bk_kernwarn 613.for _kernel in ${BUILDKERNELS} 614 @echo "--------------------------------------------------------------" 615 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`" 616 @echo "--------------------------------------------------------------" 617 @echo "===> ${_kernel}" 618.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) 619 rm -rf ${KRNLOBJDIR}/${_kernel} 620.else 621 @if [ -f ${KRNLOBJDIR}/${_kernel}/.buildkernel_run ]; then \ 622 echo "YOU ARE REBUILDING WITH NATIVEKERNEL, REMOVING OLD BUILDKERNEL BUILD"; \ 623 rm -rf ${KRNLOBJDIR}/${_kernel}; fi 624.endif 625 mkdir -p ${KRNLOBJDIR} 626.if !defined(NO_KERNELCONFIG) 627 cd ${KRNLCONFDIR}; \ 628 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \ 629 ${KERNCONFDIR}/${_kernel} 630.endif 631.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) && defined(KERNEL_VERSION_${_kernel}) 632 echo ${KERNEL_VERSION_${_kernel}} > ${KRNLOBJDIR}/${_kernel}/version 633.endif 634 touch ${KRNLOBJDIR}/${_kernel}/.nativekernel_run 635 cd ${KRNLOBJDIR}/${_kernel}; \ 636 MAKESRCPATH=${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm \ 637 ${MAKE} -DBOOTSTRAPPING -f ${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm/Makefile 638.if !defined(NO_KERNELDEPEND) 639 cd ${KRNLOBJDIR}/${_kernel}; \ 640 ${MAKE} KERNEL=${INSTKERNNAME} depend 641.endif 642 cd ${KRNLOBJDIR}/${_kernel}; \ 643 ${MAKE} KERNEL=${INSTKERNNAME} all 644 @echo "--------------------------------------------------------------" 645 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`" 646 @echo "--------------------------------------------------------------" 647.endfor 648 649# The quickkernel target rebuilds the specified kernels as quickly 650# as possible. It will use the native tools or the buildworld cross tools 651# based on whether the kernel was originally generated via buildkernel or 652# nativekernel. Config is rerun but the object hierarchy is not rebuilt, 653# nor is the make depend step run. 654# 655quickkernel: maybe_bk_tools bk_build_list bk_kernwarn 656.for _kernel in ${BUILDKERNELS} 657 @echo "--------------------------------------------------------------" 658 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`" 659 @echo "--------------------------------------------------------------" 660 @echo "===> ${_kernel}" 661.if exists(${KRNLOBJDIR}/${_kernel}/.buildkernel_run) 662.if !defined(NO_KERNELCONFIG) 663 cd ${KRNLCONFDIR}; \ 664 PATH=${STRICTTMPPATH} \ 665 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \ 666 ${KERNCONFDIR}/${_kernel} 667.endif 668 cd ${KRNLOBJDIR}/${_kernel}; \ 669 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all 670.else 671.if !defined(NO_KERNELCONFIG) 672 cd ${KRNLCONFDIR}; \ 673 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \ 674 ${KERNCONFDIR}/${_kernel} 675.endif 676 cd ${KRNLOBJDIR}/${_kernel}; \ 677 ${MAKE} KERNEL=${INSTKERNNAME} all 678.endif 679 @echo "--------------------------------------------------------------" 680 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`" 681 @echo "--------------------------------------------------------------" 682.endfor 683 684 685# installkernel 686# 687# Install the kernel defined by INSTALLKERNEL 688# 689installkernel reinstallkernel: 690.if exists(${KRNLOBJDIR}/${_kernel}/.buildkernel_run) 691 cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \ 692 ${CROSSENV} ${MAKE} KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//} 693.else 694 cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \ 695 ${MAKE} KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//} 696.endif 697 698# 699# most 700# 701# Build most of the user binaries on the existing system libs and includes. 702# 703most: 704 @echo "--------------------------------------------------------------" 705 @echo ">>> Building programs only" 706 @echo "--------------------------------------------------------------" 707.for _dir in bin sbin libexec usr.bin usr.sbin gnu/libexec gnu/usr.bin gnu/usr.sbin 708 cd ${.CURDIR}/${_dir}; ${MAKE} DIRPRFX=${_dir}/ all 709.endfor 710 711# 712# installmost 713# 714# Install the binaries built by the 'most' target. This does not include 715# libraries or include files. 716# 717installmost: 718 @echo "--------------------------------------------------------------" 719 @echo ">>> Installing programs only" 720 @echo "--------------------------------------------------------------" 721.for _dir in bin sbin libexec usr.bin usr.sbin gnu/libexec gnu/usr.bin gnu/usr.sbin 722 cd ${.CURDIR}/${_dir}; ${MAKE} DIRPRFX=${_dir}/ install 723.endfor 724 725# 726# ------------------------------------------------------------------------ 727# 728# From here onwards are utility targets used by the 'make world' and 729# related targets. If your 'world' breaks, you may like to try to fix 730# the problem and manually run the following targets to attempt to 731# complete the build. Beware, this is *not* guaranteed to work, you 732# need to have a pretty good grip on the current state of the system 733# to attempt to manually finish it. If in doubt, 'make world' again. 734# 735 736# bootstrap-tools: Build all tools required to build all tools. Note that 737# order is important in a number of cases and also note that the bootstrap 738# and build tools stages have access to earlier binaries they themselves 739# had generated. 740# 741# patch: older patch's do not have -i. This program must be built 742# first so other bootstrap tools that need to apply patches 743# can use it. 744# [x]install: dependancies on various new install features 745# rpcgen: old rpcgen used a hardwired cpp path, newer OBJFORMAT_PATH 746# envs are not compatible with older objformat binaries. 747# 748.if exists(${.CURDIR}/games) && !defined(NO_GAMES) 749_strfile= games/fortune/strfile 750.endif 751 752bootstrap-tools: 753 ${LN} -fs /bin/date ${BTOOLSDEST}/bin/date 754.for _tool in ${_strfile} \ 755 usr.bin/patch \ 756 bin/chmod bin/cp bin/cpdup bin/dd bin/mkdir bin/rm bin/echo bin/test \ 757 bin/cat bin/ln bin/mv bin/csh bin/expr bin/sh \ 758 bin/hostname bin/kill \ 759 usr.bin/yacc usr.bin/colldef usr.bin/uudecode usr.bin/xinstall \ 760 usr.bin/m4 usr.bin/rpcgen usr.bin/make usr.bin/awk usr.bin/stat \ 761 usr.bin/find usr.bin/lex usr.bin/sed usr.bin/uname usr.bin/touch \ 762 usr.bin/mkdep usr.bin/mktemp usr.bin/lorder usr.bin/file2c \ 763 usr.bin/tsort usr.bin/tr usr.bin/join usr.bin/wc usr.bin/basename \ 764 usr.bin/gencat usr.bin/chflags usr.bin/expand usr.bin/paste \ 765 usr.bin/mklocale usr.bin/uuencode usr.bin/compile_et usr.bin/hexdump \ 766 usr.bin/cap_mkdb usr.bin/true usr.bin/false \ 767 usr.bin/cmp usr.bin/xargs usr.bin/id usr.bin/env usr.bin/dirname \ 768 usr.bin/tail \ 769 usr.sbin/chown usr.sbin/mtree usr.sbin/config \ 770 usr.sbin/btxld usr.sbin/zic usr.sbin/makewhatis \ 771 gnu/usr.bin/texinfo gnu/usr.bin/grep gnu/usr.bin/sort \ 772 usr.bin/gzip usr.bin/bzip2 usr.bin/mkcsmapper usr.bin/mkesdb 773 ${ECHODIR} "===> ${_tool} (bootstrap-tools)"; \ 774 cd ${.CURDIR}/${_tool}; \ 775 ${MAKE} DIRPRFX=${_tool}/ obj; \ 776 ${MAKE} DIRPRFX=${_tool}/ depend; \ 777 ${MAKE} DIRPRFX=${_tool}/ all; \ 778 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${BTOOLSDEST} install 779.endfor 780 touch ${BTOOLSDEST}/.bootstrap_done 781 782# build-tools: Build special purpose build tools. 783# 784# XXX we may be able to remove or consolidate this into bootstrap-tools 785# now that we have the native helper (.nx/.no) infrastructure. 786# 787.if exists(${.CURDIR}/share) && !defined(NO_SHARE) 788_share= share/syscons/scrnmaps 789.endif 790 791.if !defined(NO_GCC34) 792_gcc34_cross= gnu/usr.bin/cc34 793_gcc34_tools= gnu/usr.bin/cc34/cc_prep gnu/usr.bin/cc34/cc_tools 794.endif 795_gcc41_cross= gnu/usr.bin/cc41 796_gcc41_tools= gnu/usr.bin/cc41/cc_prep gnu/usr.bin/cc41/cc_tools 797_binutils= gnu/usr.bin/binutils217 798 799.if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \ 800 !defined(NO_CRYPT) && defined(WANT_KERBEROS) 801_libkrb5= kerberos5/tools kerberos5/lib/libroken kerberos5/lib/libvers \ 802 kerberos5/lib/libasn1 kerberos5/lib/libhdb kerberos5/lib/libsl 803.endif 804 805build-tools: 806.for _tool in ${_gcc34_tools} ${_gcc41_tools} ${_libkrb5} ${_share} 807 ${ECHODIR} "===> ${_tool} (build-tools)"; \ 808 cd ${.CURDIR}/${_tool}; \ 809 ${MAKE} DIRPRFX=${_tool}/ obj; \ 810 ${MAKE} DIRPRFX=${_tool}/ depend; \ 811 ${MAKE} DIRPRFX=${_tool}/ all; \ 812 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${BTOOLSDEST} install 813.endfor 814 touch ${BTOOLSDEST}/.build_done 815 816# 817# cross-tools: Build cross-building tools 818# 819.if ${TARGET_ARCH} == "i386" && ${MACHINE_ARCH} != "i386" 820_btxld= usr.sbin/btxld 821.endif 822 823cross-tools: 824.for _tool in ${_btxld} ${_binutils} \ 825 usr.bin/objformat usr.sbin/crunch/crunchide \ 826 ${_gcc34_cross} ${_gcc41_cross} 827 ${ECHODIR} "===> ${_tool} (cross-tools)"; \ 828 cd ${.CURDIR}/${_tool}; \ 829 ${MAKE} DIRPRFX=${_tool}/ obj; \ 830 ${MAKE} DIRPRFX=${_tool}/ depend; \ 831 ${MAKE} DIRPRFX=${_tool}/ all; \ 832 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${CTOOLSDEST} install 833.endfor 834 touch ${CTOOLSDEST}/.cross_done 835 836# 837# hierarchy - ensure that all the needed directories are present 838# 839hierarchy: 840 cd ${.CURDIR}/etc; ${MAKE} distrib-dirs 841 842# 843# libraries - build all libraries, and install them under ${DESTDIR}. 844# 845# The list of libraries with dependents (${_prebuild_libs}) and their 846# interdependencies (__L) are built automatically by the 847# ${.CURDIR}/tools/make_libdeps.sh script. 848# 849# .makeenv does not work when bootstrapping from 4.x, so we must be sure 850# to specify the correct CCVER or 'cc' will not exec the correct compiler. 851# 852libraries: 853.if !defined(NO_GCC34) 854 cd ${.CURDIR}; \ 855 HOST_CCVER=${HOST_CCVER} CCVER=gcc34 \ 856 ${MAKE} -f Makefile.inc1 _startup_libs34; 857.endif 858 cd ${.CURDIR}; \ 859 HOST_CCVER=${HOST_CCVER} CCVER=gcc41 \ 860 ${MAKE} -f Makefile.inc1 _startup_libs41; 861 cd ${.CURDIR}; \ 862 ${MAKE} -f Makefile.inc1 _startup_libs; \ 863 ${MAKE} -f Makefile.inc1 _prebuild_libs; \ 864 ${MAKE} -f Makefile.inc1 _generic_libs; 865 touch ${WORLDDEST}/.libraries_done 866 867# These dependencies are not automatically generated: 868# 869# gnu/lib/${CCVER}/libgcc and gnu/lib/${CCVER}/csu must be built before all 870# shared libraries for ELF. The target for _startup_libs34 is 871# specifically built using gcc34. Same goes for _startup_libs41. 872# 873_startup_libs34= gnu/lib/gcc34/csu gnu/lib/gcc34/libgcc 874_startup_libs41= gnu/lib/gcc41/csu gnu/lib/gcc41/libgcc 875_startup_libs= lib/libc lib/libc_rtld 876 877_prebuild_libs= lib/libbz2 lib/libz lib/libarchive 878_prebuild_libs+= lib/libutil 879 880_generic_libs= gnu/lib 881 882.if !defined(NO_CRYPT) && defined(WANT_KERBEROS) 883_prebuild_libs+= kerberos5/tools 884_prebuild_libs+= kerberos5/lib/libasn1 885_prebuild_libs+= kerberos5/lib/libgssapi 886_prebuild_libs+= kerberos5/lib/libkrb5 887_prebuild_libs+= kerberos5/lib/libroken 888_generic_libs+= kerberos5/lib 889.endif 890 891_prebuild_libs+= lib/libcom_err lib/libcrypt lib/libmd \ 892 lib/libncurses/libncurses lib/libopie lib/libradius \ 893 lib/libsbuf lib/libtacplus lib/libm \ 894 lib/libpam lib/libypclnt lib/lib${THREAD_LIB} 895 896lib/libopie__L lib/libradius__L lib/libtacplus__L: lib/libmd__L 897 898_generic_libs+= lib 899 900.if !defined(NO_CRYPT) 901.if !defined(NO_OPENSSL) 902_prebuild_libs+= secure/lib/libcrypto secure/lib/libssl 903.if !defined(NO_OPENSSH) 904_prebuild_libs+= secure/lib/libssh 905secure/lib/libssh__L: secure/lib/libcrypto__L lib/libz__L 906.endif 907.endif 908_generic_libs+= secure/lib 909.endif 910 911_generic_libs+= usr.bin/lex/lib 912 913.for _lib in ${_startup_libs34} ${_startup_libs41} \ 914 ${_startup_libs} ${_prebuild_libs} ${_generic_libs} 915${_lib}__L: .PHONY 916.if exists(${.CURDIR}/${_lib}) 917 ${ECHODIR} "===> ${_lib}"; \ 918 cd ${.CURDIR}/${_lib}; \ 919 ${MAKE} DIRPRFX=${_lib}/ depend; \ 920 ${MAKE} DIRPRFX=${_lib}/ all; \ 921 ${MAKE} DIRPRFX=${_lib}/ install 922.endif 923.endfor 924 925_startup_libs: ${_startup_libs:S/$/__L/} 926_startup_libs34: ${_startup_libs34:S/$/__L/} 927_startup_libs41: ${_startup_libs41:S/$/__L/} 928_prebuild_libs: ${_prebuild_libs:S/$/__L/} 929_generic_libs: ${_generic_libs:S/$/__L/} 930 931# library targets must be ordered because there are inter-library 932# races (e.g. generation of tconfig.h) 933# 934.ORDER: ${_startup_libs34:S/$/__L/} 935.ORDER: ${_startup_libs41:S/$/__L/} 936.ORDER: ${_startup_libs:S/$/__L/} 937.ORDER: ${_prebuild_libs:S/$/__L/} 938.ORDER: ${_generic_libs:S/$/__L/} 939 940.for __target in clean cleandepend cleandir obj depend includes 941.for entry in ${SUBDIR} 942${entry}.${__target}__D: .PHONY 943 @if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \ 944 ${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \ 945 edir=${entry}.${MACHINE_ARCH}; \ 946 cd ${.CURDIR}/$${edir}; \ 947 else \ 948 ${ECHODIR} "===> ${DIRPRFX}${entry}"; \ 949 edir=${entry}; \ 950 cd ${.CURDIR}/$${edir}; \ 951 fi; \ 952 ${MAKE} ${__target} DIRPRFX=${DIRPRFX}$${edir}/ 953.endfor 954par-${__target}: ${SUBDIR:S/$/.${__target}__D/} 955.ORDER: ${SUBDIR:S/$/.${__target}__D/} 956.endfor 957.ORDER: par-clean par-cleandepend par-cleandir par-obj par-depend par-includes 958 959# The wmake target is used by /usr/bin/wmake to run make in a 960# world build environment. 961# 962wmake: 963 @echo '${WMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${WMAKE_ARGS}' 964 965wmakeenv: 966 @echo '${WMAKEENV} /bin/sh' 967 968bmake: 969 @echo '${BMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${BMAKE_ARGS}' 970 971bmakeenv: 972 @echo '${BMAKEENV} /bin/sh' 973 974tmake: 975 @echo '${TMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${TMAKE_ARGS}' 976 977tmakeenv: 978 @echo '${TMAKEENV} /bin/sh' 979 980xmake: 981 @echo '${XMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${XMAKE_ARGS}' 982 983xmakeenv: 984 @echo '${XMAKEENV} /bin/sh' 985 986.include <bsd.subdir.mk> 987 988