1# $FreeBSD: src/etc/defaults/make.conf,v 1.97.2.80 2003/02/15 16:34:56 trhodes Exp $ 2# $DragonFly: src/etc/defaults/make.conf,v 1.33 2007/12/23 02:46:40 sephe Exp $ 3# 4# NOTE: Please would any committer updating this file also update the 5# make.conf(5) manual page, if necessary, which is located in 6# src/share/man/man5/make.conf.5. 7# 8# This file, if present, will be read by make (see /usr/share/mk/sys.mk). 9# It allows you to override macro definitions to make without changing 10# your source tree, or anything the source tree installs. 11# 12# This file must be in valid Makefile syntax. 13# 14# You have to find the things you can put here in the Makefiles and 15# documentation of the source tree. 16# 17# The CPUTYPE variable controls which processor should be targeted for 18# generated code. This controls processor-specific optimizations in 19# certain code (currently only OpenSSL) as well as modifying the value 20# of CFLAGS to contain the appropriate optimization directive to gcc. 21# The automatic setting of CFLAGS may be overridden using the 22# NO_CPU_CFLAGS variable below. 23# Currently the following CPU types are recognized: 24# Intel x86 architecture: 25# (AMD CPUs) opteron athlon-fx athlon64 k8 k7 k6-3 k6-2 k6 k5 26# (Intel CPUs) p4 pentium-m p3 p2 i686 i586/mmx i586 i486 27# 28# If you experience any problems after setting this flag, please unset 29# it again before submitting a bug report or attempting to modify code. 30# It may be that certain types of software will become unstable after being 31# compiled with processor-specific (or higher - see below) optimization flags. 32# If in doubt, do not set CPUTYPE or CFLAGS to non-default values. 33# 34#CPUTYPE=i686 35#NO_CPU_CFLAGS= true # Don't add -march=<cpu> to CFLAGS automatically 36#NO_CPU_COPTFLAGS=true # Don't add -march=<cpu> to COPTFLAGS automatically 37# 38# The CCVER variable controls which GCC-version to use by default. It 39# should be set using ?= so as not to interfere with CCVER overrides from 40# userland or the buildworld. Note that building world or the kernel using 41# an experimental compiler might be broken at any time. We currently 42# recommend that an override NOT be set in /etc/make.conf. 43# 44#CCVER?=gcc34 # (use GCC 3.4, old version) 45#CCVER?=gcc41 # (use GCC 4.1, default) 46# 47# CFLAGS controls the compiler settings used when compiling C code. 48# Note that optimization settings above -O (-O2, ...) are not recommended 49# or supported for compiling the world or the kernel - please revert any 50# nonstandard optimization settings to "-O" before submitting bug reports 51# to the developers. 52# 53#CFLAGS= -O -pipe 54# 55# CXXFLAGS controls the compiler settings used when compiling C++ code. 56# Note that CXXFLAGS is initially set to the value of CFLAGS. If you wish 57# to add to CXXFLAGS value, "+=" must be used rather than "=". Using "=" 58# alone will remove the often needed contents of CFLAGS from CXXFLAGS. 59# 60#CXXFLAGS+= -fmemoize-lookups -fsave-memoized 61# 62# BDECFLAGS are a set of gcc warning settings that Bruce Evans has suggested 63# for use in developing FreeBSD and testing changes. They can be used by 64# putting "CFLAGS+=${BDECFLAGS}" in /etc/make.conf. -Wconversion is not 65# included here due to compiler bugs, e.g., mkdir()'s mode_t argument. 66# 67BDECFLAGS= -W -Wall -ansi -pedantic -Wbad-function-cast -Wcast-align \ 68 -Wcast-qual -Wchar-subscripts -Winline \ 69 -Wmissing-prototypes -Wnested-externs -Wpointer-arith \ 70 -Wredundant-decls -Wshadow -Wstrict-prototypes -Wwrite-strings 71# 72# WARNS_WERROR causes -Werror to be added when WARNS is in effect. 73#WARNS_WERROR= yes 74# 75# To compile just the kernel with special optimizations, you should use 76# this instead of CFLAGS (which is not applicable to kernel builds anyway). 77# There is very little to gain by using higher optimization levels, and doing 78# so can cause problems. 79# 80#COPTFLAGS= -O -pipe 81# 82# Strip the file before installing. Setting this to nothing will keep 83# the debugging symbols in the installed files. 84#STRIP= -s 85# 86# Compare before install 87#INSTALL=install -C 88# 89# To build ppp with normal permissions 90#PPP_NOSUID= true 91# 92# To enable installing ssh(1) with the setuid bit turned on 93#ENABLE_SUID_SSH= true 94# 95# Default thread library (c_r or thread_xu) 96THREAD_LIB?= thread_xu 97# 98# To avoid building various parts of the base system: 99#NO_BIND= true # do not build BIND 100#NO_CRYPT= true # do not build crypto code 101#NO_CVS= true # do not build CVS 102#NO_FORTRAN= true # do not build g77 and related libraries 103#NO_GAMES= true # do not enter the games subdirectory 104#NO_GCC34= true # do not build gcc-3.4 105#NO_GDB= true # do not build GDB 106#NO_I4B= true # do not build isdn4bsd package 107#NO_IPFILTER= true # do not build IP Filter package 108#NO_LIBC_R= true # do not build libc_r (re-entrant version of libc) 109#NO_LPR= true # do not build lpr and related programs 110#NO_MAILWRAPPER=true # do not build the mailwrapper(8) MTA selector 111#NO_MODULES= true # do not build modules with the kernel 112#NO_OBJC= true # do not build Objective C support 113#NO_OPENSSH= true # do not build OpenSSH 114#NO_OPENSSL= true # do not build OpenSSL (implies NO_OPENSSH) 115#NO_SENDMAIL= true # do not build sendmail and related programs 116#NO_SHARE= true # do not enter the share subdirectory 117#NO_X= true # do not compile in XWindows support (e.g. doscmd) 118#NOINFO= true # do not make or install info files 119#NOINFOCOMPRESS=true # do not compress info files 120#NOMAN= true # do not build manual pages 121#NOMANCOMPRESS= true # do not compress man pages 122#NOPROFILE= true # Avoid compiling profiled libraries 123# 124# To build sys/modules when building the world (our old way of doing things) 125#MODULES_WITH_WORLD=true # do not build modules when building kernel 126# 127# The list of modules to build instead of all of them. 128#MODULES_OVERRIDE= emulation/linux net/ipfw 129# 130# To avoid running MAKEDEV all on /dev during install: 131#NO_MAKEDEV= true 132# 133# The following controls building optional IDEA code in libcrypto. 134# Patents are involved - you must not use this unless 135# you either have a license or fall within patent 'fair use' 136# provisions. 137# 138# *** It is YOUR RESPONSIBILITY to determine if you can use this! *** 139# 140# IDEA is patented in the USA and many European countries - thought to 141# be OK to use for any non-commercial use. This is optional. 142#WANT_IDEA= YES # IDEA (128 bit symmetric encryption) 143# 144# The paper size for groff(1), either "letter" or "A4" 145#GROFF_PAPER_SIZE= letter 146# 147# Default format for system documentation, depends on your printer. 148# Set this to "ascii" for simple printers or screen 149# 150#PRINTERDEVICE= ps 151# 152# By default, the system will always use the keyboard/video card as system 153# console. However, the boot blocks may be dynamically configured to use a 154# serial port in addition to or instead of the keyboard/video console. 155# 156# By default we use COM1 as our serial console port *if* we're going to use 157# a serial port as our console at all. Alter as necessary. 158# 159# COM1: = 0x3F8, COM2: = 0x2F8, COM3: = 0x3E8, COM4: = 0x2E8 160# 161#BOOT_COMCONSOLE_PORT= 0x3F8 162# 163# The default serial console speed is 9600. Set the speed to a larger value 164# for better interactive response. 165# 166#BOOT_COMCONSOLE_SPEED= 115200 167# 168# By default the 'pxeboot' loader retrieves the kernel via NFS. Defining 169# this and recompiling /usr/src/sys/boot will cause it to retrieve the kernel 170# via TFTP. This allows pxeboot to load a custom BOOTP diskless kernel yet 171# still mount the server's '/' (i.e. rather than load the server's kernel). 172# 173#LOADER_TFTP_SUPPORT= YES 174# 175# If you want Kerberos 5, define this. 176#WANT_KERBEROS= yes 177# 178# If you want to use the k5su utility, define this to have it installed 179# set-user-ID. 180#ENABLE_SUID_K5SU= yes 181# 182# CVSup update flags. Edit SUPFILE settings to reflect whichever distribution 183# file(s) you use on your site (see /usr/share/examples/cvsup/README for more 184# information on CVSup and these files). To use, do "make update" in /usr/src. 185# 186#SUP_UPDATE= yes 187#SUP= /usr/local/bin/cvsup 188#SUPFLAGS= -g -L 2 189#SUPHOST= cvsup.dragonflybsd.org 190#SUPFILE= /usr/share/examples/cvsup/DragonFly-src-supfile 191#DOCSUPFILE= /usr/share/examples/cvsup/doc-supfile 192# 193# top(1) uses a hash table for the user names. The size of this hash 194# can be tuned to match the number of local users. The table size should 195# be a prime number approximately twice as large as the number of lines in 196# /etc/passwd. The default number is 20011. 197# 198#TOP_TABLE_SIZE= 101 199# 200# Documentation 201# 202# The list of languages and encodings to build and install 203# 204#DOC_LANG= en_US.ISO8859-1 ru_RU.KOI8-R 205# 206# sendmail 207# 208# The following sets the default m4 configuration file to use at 209# install time. Use with caution as a make install will overwrite 210# any existing /etc/mail/sendmail.cf. Note that SENDMAIL_CF is now 211# deprecated. The value should be a fully qualified path name. 212# Avoid using a value of /etc/mail/sendmail.mc as a buildworld will 213# create /etc/mail/sendmail.cf before installworld installs an 214# updated sendmail binary. 215# 216#SENDMAIL_MC=/etc/mail/myconfig.mc 217# 218# The following sets the default m4 configuration file for mail 219# submission to use at install time. Use with caution as a make 220# install will overwrite any existing /etc/mail/submit.cf. The 221# value should be a fully qualified path name. 222# Avoid using a value of /etc/mail/submit.mc as a buildworld will 223# create /etc/mail/submit.cf before installworld installs an 224# updated sendmail binary. 225# 226#SENDMAIL_SUBMIT_MC=/etc/mail/mysubmit.mc 227# 228# If you need to build additional .cf files during a make buildworld, 229# include the full paths to the .mc files in SENDMAIL_ADDITIONAL_MC. 230# Avoid using a value of /etc/mail/sendmail.mc as a buildworld will 231# create /etc/mail/sendmail.cf before installworld installs an 232# updated sendmail binary. 233# 234#SENDMAIL_ADDITIONAL_MC=/etc/mail/foo.mc /etc/mail/bar.mc 235# 236# Setting the following variable modifies the flags passed to m4 when 237# building a .cf file from a .mc file. It can be used to enable 238# features disabled by default. 239# 240#SENDMAIL_M4_FLAGS= 241# 242# Setting the following variables modifies the build environment for 243# sendmail and its related utilities. For example, SASL support can be 244# added with settings such as: 245# 246# with SASLv1: 247# SENDMAIL_CFLAGS=-I/usr/local/include/sasl1 -DSASL 248# SENDMAIL_LDFLAGS=-L/usr/local/lib 249# SENDMAIL_LDADD=-lsasl 250# 251# with SASLv2: 252# SENDMAIL_CFLAGS=-I/usr/local/include -DSASL=2 253# SENDMAIL_LDFLAGS=-L/usr/local/lib 254# SENDMAIL_LDADD=-lsasl2 255# 256# Note: If you are using Cyrus SASL with other applications which require 257# access to the sasldb file, you should add the following to your 258# sendmail.mc file: 259# 260# define(`confDONT_BLAME_SENDMAIL',`GroupReadableSASLDBFile') 261# 262#SENDMAIL_CFLAGS= 263#SENDMAIL_LDFLAGS= 264#SENDMAIL_LDADD= 265#SENDMAIL_DPADD= 266# 267# Setting SENDMAIL_SET_USER_ID will install the sendmail binary as a 268# set-user-ID root binary instead of a set-group-ID smmsp binary and will 269# prevent the installation of /etc/mail/submit.cf. 270# This is a deprecated mode of operation. See etc/mail/README for more 271# information. 272# 273#SENDMAIL_SET_USER_ID= 274# 275# The permissions to use on alias and map databases generated using 276# /etc/mail/Makefile. Defaults to 0640. 277# 278#SENDMAIL_MAP_PERMS= 279