1#!/bin/sh 2# 3 4# This is rc.conf - a file full of useful variables that you can set 5# to change the default startup behavior of your system. You should 6# not edit this file! Put any overrides into one of the ${rc_conf_files} 7# instead and you will be able to update these defaults later without 8# spamming your local configuration information. 9# 10# The ${rc_conf_files} files should only contain values which override 11# values set in this file. This eases the upgrade path when defaults 12# are changed and new features are added. 13# 14# All arguments must be in double or single quotes. 15# 16# $FreeBSD: src/etc/defaults/rc.conf,v 1.180 2003/06/26 09:50:50 smkelly Exp $ 17# $DragonFly: src/etc/defaults/rc.conf,v 1.28 2005/07/25 18:57:36 drhodus Exp $ 18 19############################################################## 20### Important initial Boot-time options #################### 21############################################################## 22 23rc_debug="NO" # Set to YES to enable debugging output from rc.d 24rc_info="YES" # Enables display of informational messages at boot. 25rcshutdown_timeout="30" # Seconds to wait before terminating rc.shutdown 26swapfile="NO" # Set to name of swapfile if aux swapfile desired. 27apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO). 28apmd_enable="NO" # Run apmd to handle APM event from userland. 29apmd_flags="" # Flags to apmd (if enabled). 30battd_enable="NO" # Set to YES to have battd alert on 10% battery power remaining. 31battd_flags="" # Flags to battd (if enabled). 32kldxref_enable="NO" # Build linker.hints files with kldxref(8). 33kldxref_clobber="NO" # Overwrite old linker.hints at boot. 34kldxref_module_path="" # Override kern.module_path. A ';'-delimited list. 35pccard_ifconfig="NO" # Specialized pccard ethernet configuration (or NO). 36pccard_ether_delay="5" # Delay before trying to start dhclient in pccard_ether 37removable_interfaces="" # Removable network interfaces for /etc/pccard_ether. 38local_startup="/usr/pkg/etc/rc.d /usr/local/etc/rc.d /usr/X11R6/etc/rc.d" # startup script dirs. 39script_name_sep=" " # Change if your startup scripts' names contain spaces 40rc_conf_files="/etc/rc.conf /etc/rc.conf.local" 41fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails. 42netfs_types="nfs:NFS smbfs:SMB portalfs:PORTAL nwfs:NWFS" # Net filesystems. 43extra_netfs_types="NO" # List of network extra filesystem types for delayed 44 # mount at startup (or NO). 45 46############################################################## 47### Network configuration sub-section ###################### 48############################################################## 49 50### Basic network and firewall/security options: ### 51# 52# see 'man firewall' for an explanation of the default firewall rules 53# 54hostname="" # Set this! 55nisdomainname="NO" # Set to NIS domain if using NIS (or NO). 56dhclient_program="/sbin/dhclient" # Path to dhcp client program. 57dhclient_flags="" # Additional flags to pass to dhcp client. 58dhcpd_enable="NO" # Set to YES to enable the DHCP server 59dhcrelay_enable="NO" # Set to YES to enable the DHCP relay server 60firewall_enable="NO" # Set to YES to enable firewall functionality 61firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall 62firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall) 63firewall_trusted_nets="192.168.0.0/16" # list of trusted nets 64firewall_trusted_interfaces="" # list of trusted interfaces e.g. "rl0 xl0" 65firewall_allowed_icmp_types="0 3 8 11 12 13 14" 66firewall_open_tcp_ports="22 25 53 80 113 443" 67firewall_open_udp_ports="53" 68firewall_quiet="NO" # Set to YES to suppress rule display 69firewall_logging="NO" # Set to YES to enable events logging 70firewall_flags="" # Flags passed to ipfw when type is a file 71ip_portrange_first="NO" # Set first dynamically allocated port 72ip_portrange_last="NO" # Set last dynamically allocated port 73ipsec_enable="NO" # Set to YES to run setkey on ipsec_file 74ipsec_file="/etc/ipsec.conf" # Name of config file for setkey 75natd_program="/sbin/natd" # path to natd, if you want a different one. 76natd_enable="NO" # Enable natd (if firewall_enable == YES). 77natd_interface="" # Public interface or IPaddress to use. 78natd_flags="" # Additional flags for natd. 79ipfilter_enable="NO" # Set to YES to enable ipfilter functionality 80ipfilter_program="/sbin/ipf" # where the ipfilter program lives 81ipfilter_rules="/etc/ipf.rules" # rules definition file for ipfilter, see 82 # /usr/src/contrib/ipfilter/rules for examples 83ipfilter_flags="" # additional flags for ipfilter 84ipnat_enable="NO" # Set to YES to enable ipnat functionality 85ipnat_program="/sbin/ipnat" # where the ipnat program lives 86ipnat_rules="/etc/ipnat.rules" # rules definition file for ipnat 87ipnat_flags="" # additional flags for ipnat 88ipmon_enable="NO" # Set to YES for ipmon; needs ipfilter or ipnat 89ipmon_program="/sbin/ipmon" # where the ipfilter monitor program lives 90ipmon_flags="-Ds" # typically "-Ds" or "-D /var/log/ipflog" 91ipfs_enable="NO" # Set to YES to enable saving and restoring 92 # of state tables at shutdown and boot 93ipfs_program="/sbin/ipfs" # where the ipfs program lives 94ipfs_flags="" # additional flags for ipfs 95pf_enable="NO" # Set to YES to enable packet filter (pf) 96pf_rules="/etc/pf.conf" # rules definition file for pf 97pf_program="/usr/sbin/pfctl" # where the pfctl program lives 98pf_flags="" # additional flags for pfctl 99pflog_enable="NO" # Set to YES to enable packet filter logging 100pflog_logfile="/var/log/pflog" # where pflogd shoule store the logfile 101pflog_program="/usr/sbin/pflogd" # where the pflogd program lives 102pflog_flags="" # additional flags for pflogd 103tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions. 104log_in_vain="0" # >=1 to log connects to ports w/o listeners. 105tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO). 106# For the following option you need to have TCP_DROP_SYNFIN set in your 107# kernel. Please refer to LINT and NOTES for details. 108tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN 109 # NOTE: this violates the TCP specification 110icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets 111icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets 112network_interfaces="auto" # List of network interfaces (or "auto"). 113cloned_interfaces="" # List of cloned network interfaces to create. 114#cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config. 115ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration. 116#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry. 117#ifconfig_ed0_ipx="ipx 0x00010010" # Sample IPX address family entry. 118# 119# If you have any sppp(4) interfaces above, you might also want to set 120# the following parameters. Refer to spppcontrol(8) for their meaning. 121sppp_interfaces="" # List of sppp interfaces. 122#sppp_interfaces="isp0" # example: sppp over ISDN 123#spppconfig_isp0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'" 124gif_interfaces="NO" # List of GIF tunnels (or "NO"). 125#gif_interfaces="gif0 gif1" # Examples typically for a router. 126 # Choose correct tunnel addrs. 127#gifconfig_gif0="10.1.1.1 10.1.2.1" # Examples typically for a router. 128#gifconfig_gif1="10.1.1.2 10.1.2.2" # Examples typically for a router. 129 130# User ppp configuration. 131ppp_enable="NO" # Start user-ppp (or NO). 132ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated". 133 # For details see man page for ppp(8). Default is auto. 134ppp_nat="YES" # Use PPP's internal network address translation or NO. 135ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf. 136ppp_user="root" # Which user to run ppp as 137 138### Network daemon (miscellaneous) ### 139syslogd_enable="YES" # Run syslog daemon (or NO). 140syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one. 141#syslogd_flags="-s" # Flags to syslogd (if enabled). 142syslogd_flags="-ss" # Syslogd flags to not bind an inet socket 143inetd_enable="NO" # Run the network daemon dispatcher (YES/NO). 144inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one. 145inetd_flags="-wW" # Optional flags to inetd 146# 147# named. It may be possible to run named in a sandbox, man security for 148# details. Note: when named_chrootdir is specified, RCNG automatically 149# adds '-u bind'. 150# 151named_enable="NO" # Run named, the DNS server (or NO). 152named_program="/usr/sbin/named" # path to named, if you want a different one. 153named_pidfile="/var/run/named.pid" # Pid file 154named_chrootdir="/etc/namedb" # Chroot directory (or "" not to auto-chroot it) 155 156# 157# kerberos. Do not run the admin daemons on slave servers 158# 159kerberos5_server_enable="NO" # Run a kerberos 5 master server (or NO). 160kerberos5_server="/usr/libexec/kdc" # path to kerberos 5 KDC 161kadmind5_server_enable="NO" # Run kadmind (or NO) 162kadmind5_server="/usr/libexec/kadmind" # path to kerberos 5 admin daemon 163kpasswdd_server_enable="NO" # Run kpasswdd (or NO) 164kpasswdd_server="/usr/libexec/kpasswdd" # path to kerberos 5 passwd daemon 165 166rwhod_enable="NO" # Run the rwho daemon (or NO). 167rwhod_flags="" # Flags for rwhod 168rarpd_enable="NO" # Run rarpd (or NO). 169rarpd_flags="" # Flags to rarpd. 170bootparamd_enable="NO" # Run bootparamd (or NO). 171bootparamd_flags="" # Flags to bootparamd 172pppoed_enable="NO" # Run the PPP over Ethernet daemon. 173pppoed_provider="*" # Provider and ppp(8) config file entry. 174pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled). 175pppoed_interface="fxp0" # The interface that pppoed runs on. 176sshd_enable="NO" # Enable sshd 177sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one. 178sshd_flags="" # Additional flags for sshd. 179 180### Network File System (NFS): ### 181### Server-side options also need rpcbind_enable="YES" ### 182### 183### NOTE: attribute cache timeouts only effect NFS lookup rpc's. If 184### the mtime matches the data cache is left intact. 185### 186amd_enable="NO" # Run amd service with $amd_flags (or NO). 187amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map" 188amd_map_program="NO" # Can be set to "ypcat -k amd.master" 189nfs_client_enable="NO" # This host is an NFS client (or NO). 190nfs_client_flags="-n 4" # Flags to nfsiod (if enabled). 191nfs_access_cache="5" # Client attribute cache timeout in seconds 192#nfs_neg_cache="3" # Client attribute negative hit cache timeout 193nfs_server_enable="NO" # This host is an NFS server (or NO). 194nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled). 195mountd_enable="NO" # Run mountd (or NO). 196mountd_flags="-r" # Flags to mountd (if NFS server enabled). 197weak_mountd_authentication="NO" # Allow non-root mount requests to be served. 198nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO). 199nfs_bufpackets="" # bufspace (in packets) for client 200rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server. 201rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server. 202rpc_umntall_enable="YES" # Run NFS rpc.umntall on boot and shutdown 203rpcbind_enable="NO" # Run the portmapper service (YES/NO). 204# this is rpcbind in 5.x 205rpcbind_program="/usr/sbin/portmap" # path to rpcbind, if you want a different one. 206rpcbind_flags="" # Flags to rpcbind (if enabled). 207rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO). 208keyserv_enable="NO" # Run the SecureRPC keyserver (or NO). 209keyserv_flags="" # Flags to keyserv (if enabled). 210 211### Network Time Services options: ### 212timed_enable="NO" # Run the time daemon (or NO). 213timed_flags="" # Flags to timed (if enabled). 214ntpd_enable="NO" # Run ntpd Network Time Protocol (or NO). 215ntpd_program="/usr/sbin/ntpd" # path to ntpd, if you want a different one. 216ntpd_flags="-s" # Flags to ntpd (if enabled). 217dntpd_enable="NO" # Run dntpd Network Time Protocol (or NO). 218dntpd_program="/usr/sbin/dntpd" # path to dntpd, if you want a different one. 219dntpd_flags="" # Flags to dntpd (if enabled) also server name(s) 220 221# Network Information Services (NIS) options: All need rpcbind_enable="YES" ### 222nis_client_enable="NO" # We're an NIS client (or NO). 223nis_client_flags="" # Flags to ypbind (if enabled). 224nis_ypset_enable="NO" # Run ypset at boot time (or NO). 225nis_ypset_flags="" # Flags to ypset (if enabled). 226nis_server_enable="NO" # We're an NIS server (or NO). 227nis_server_flags="" # Flags to ypserv (if enabled). 228nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO). 229nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled). 230nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO). 231nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled). 232 233### Network routing options: ### 234defaultrouter="NO" # Set to default gateway (or NO). 235static_routes="" # Set to static route list (or leave empty). 236gateway_enable="NO" # Set to YES if this host will be a gateway. 237router_enable="NO" # Set to YES to enable a routing daemon. 238router="/sbin/routed" # Name of routing daemon to use if enabled. 239router_flags="-q" # Flags for routing daemon. 240mrouted_enable="NO" # Do multicast routing (see /etc/mrouted.conf). 241mrouted_flags="" # Flags for multicast routing daemon. 242ipxgateway_enable="NO" # Set to YES to enable IPX routing. 243ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon. 244ipxrouted_flags="" # Flags for IPX routing daemon. 245arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL. 246forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES") 247accept_sourceroute="NO" # accept source routed packets to us 248 249### ATM interface options: ### 250atm_enable="NO" # Configure ATM interfaces (or NO). 251#atm_netif_hea0="atm 1" # Network interfaces for physical interface. 252#atm_sigmgr_hea0="uni31" # Signalling manager for physical interface. 253#atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI). 254#atm_macaddr_hea0="NO" # Override physical MAC address (or NO). 255#atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local). 256#atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO). 257atm_pvcs="" # Set to PVC list (or leave empty). 258atm_arps="" # Set to permanent ARP list (or leave empty). 259 260### ISDN interface options: (see also: /usr/share/examples/isdn) ### 261isdn_enable="NO" # Enable the ISDN subsystem (or NO). 262isdn_fsdev="NO" # Output device for fullscreen mode (or NO for daemon mode). 263isdn_flags="-dn -d0x1f9" # Flags for isdnd 264isdn_ttype="cons25" # terminal type for fullscreen mode 265isdn_screenflags="NO" # screenflags for ${isdn_fsdev} 266isdn_trace="NO" # Enable the ISDN trace subsystem (or NO). 267isdn_traceflags="-f /var/tmp/isdntrace0" # Flags for isdntrace 268 269### Miscellaneous network options: ### 270icmp_bmcastecho="NO" # respond to broadcast ping packets 271 272### IPv6 options: ### 273ipv6_enable="NO" # Set to YES to set up for IPv6. 274ipv6_network_interfaces="auto" # List of network interfaces (or "auto"). 275ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO). 276#ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068) 277ipv6_static_routes="" # Set to static route list (or leave empty). 278#ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64 279 # route toward loopback interface. 280#ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1" 281ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway. 282ipv6_router_enable="NO" # Set to YES to enable an IPv6 routing daemon. 283ipv6_router="/usr/sbin/route6d" # Name of IPv6 routing daemon. 284ipv6_router_flags="" # Flags to IPv6 routing daemon. 285#ipv6_router_flags="-l" # Example for route6d with only IPv6 site local 286 # addrs. 287#ipv6_router_flags="-q" # If you want to run a routing daemon on an end 288 # node, you should stop advertisement. 289#ipv6_network_interfaces="ed0 ep0" # Examples for router 290 # or static configuration for end node. 291 # Choose correct prefix value. 292#ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr. 293#ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr. 294#ipv6_ifconfig_ed0="fec0:0:0:5::1 prefixlen 64" # Sample manual assign entry 295#ipv6_ifconfig_ed0_alias0="fec0:0:0:5::2 prefixlen 64" # Sample alias entry. 296ipv6_default_interface="NO" # Default output interface for scoped addrs. 297 # Now this works only for IPv6 link local 298 # multicast addrs. 299rtadvd_enable="NO" # Set to YES to enable an IPv6 router 300 # advertisement daemon. If set to YES, 301 # this router becomes a possible candidate 302 # IPv6 default router for local subnets. 303rtadvd_interfaces="" # Interfaces rtadvd sends RA packets. 304rtsold_enable="NO" # Set to YES to enable an IPv6 routing 305 # solicitation daemon. This is used for 306 # automatic discovery of non-link local 307 # addresses. 308rtsold_flags="-a" # Do autoprobing of outgoing interface. 309mroute6d_enable="NO" # Do IPv6 multicast routing. 310mroute6d_program="/usr/local/sbin/pim6dd" # Name of IPv6 multicast 311 # routing daemon. You need to 312 # install it from package or 313 # port. 314mroute6d_flags="" # Flags to IPv6 multicast routing daemon. 315stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4 316 # tunneling interface. Specify this entry 317 # to enable 6to4 interface. 318stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr, 319 # to limit peer addr range. Effective value 320 # is 0-31. 321stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0. 322 # If you like, you can set "AUTO" for this. 323stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0 324ipv6_faith_prefix="NO" # Set faith prefix to enable a FAITH 325 # IPv6-to-IPv4 TCP translator. You also need 326 # faithd(8) setup. 327ipv6_ipv4mapping="NO" # Set to "YES" to enable IPv4 mapped IPv6 addr 328 # communication. (like ::ffff:a.b.c.d) 329ipv6_firewall_enable="NO" # Set to YES to enable IPv6 firewall 330 # functionality 331ipv6_firewall_script="/etc/rc.firewall6" # Which script to run to set up the IPv6 firewall 332ipv6_firewall_type="UNKNOWN" # IPv6 Firewall type (see /etc/rc.firewall6) 333ipv6_firewall_quiet="NO" # Set to YES to suppress rule display 334ipv6_firewall_logging="NO" # Set to YES to enable events logging 335ipv6_firewall_flags="" # Flags passed to ip6fw when type is a file 336ipv6_ipfilter_rules="/etc/ipf6.rules" # rules definition file for ipfilter, 337 # see /usr/src/contrib/ipfilter/rules 338 # for examples 339 340############################################################## 341### System console options ################################# 342############################################################## 343 344keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO). 345keyrate="NO" # keyboard rate to: slow, normal, fast (or NO). 346keybell="NO" # See kbdcontrol(1) for options. Use "off" to disable. 347keychange="NO" # function keys default values (or NO). 348cursor="NO" # cursor type {normal|blink|destructive} (or NO). 349scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO). 350font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO). 351font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO). 352font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO). 353blanktime="300" # blank time (in seconds) or "NO" to turn it off. 354saver="NO" # screen saver: Uses /modules/${saver}_saver.ko 355moused_enable="NO" # Run the mouse daemon. 356moused_type="auto" # See man page for rc.conf(5) for available settings. 357moused_port="/dev/psm0" # Set to your mouse port. 358moused_flags="" # Any additional flags to moused. 359mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your 360 # language code table, specify alternative range 361 # start like mousechar_start=3, see vidcontrol(1) 362allscreens_flags="" # Set this vidcontrol mode for all virtual screens 363allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens 364 365 366############################################################## 367### Mail Transfer Agent (MTA) options ###################### 368############################################################## 369 370mta_start_script="/etc/rc.sendmail" 371 # Script to start your chosen MTA, called by /etc/rc. 372# Settings for /etc/rc.sendmail: 373sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO). 374sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server) 375sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission 376sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost" 377 # Flags for localhost-only MTA 378sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO). 379sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only) 380sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO). 381sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m" 382 # Flags for sendmail_msp_queue daemon. 383 384 385############################################################## 386### Miscellaneous administrative options ################### 387############################################################## 388 389mixer_enable="NO" # Manage mixer settings across reboots 390cron_enable="YES" # Run the periodic job daemon. 391cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled). 392cron_flags="" # Which options to pass to the cron daemon. 393lpd_enable="NO" # Run the line printer daemon. 394lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one. 395lpd_flags="" # Flags to lpd (if enabled). 396usbd_enable="NO" # Run the usbd daemon. 397usbd_flags="" # Flags to usbd (if enabled). 398dumpdev="NO" # Device name to crashdump to (or NO). 399dumpdir="/var/crash" # Directory where crash dumps are to be stored 400savecore_flags="" # Used if dumpdev is enabled above, and present. 401enable_quotas="NO" # turn on quotas on startup (or NO). 402check_quotas="YES" # Check quotas on startup (or NO). 403accounting_enable="NO" # Turn on process accounting (or NO). 404ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO). 405ibcs2_loaders="coff" # List of additional Ibcs2 loaders (or NO). 406sysvipc_enable="NO" # Load System V IPC primitives at startup (or NO). 407linux_enable="NO" # Linux binary compatibility loaded at startup (or NO). 408svr4_enable="NO" # SysVR4 emulation loaded at startup (or NO). 409osf1_enable="NO" # Alpha OSF/1 emulation loaded at startup (or NO). 410clear_tmp_enable="NO" # Clear /tmp at startup. 411ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks 412ldconfig_paths="/usr/lib/compat /usr/X11R6/lib /usr/local/lib" 413 # shared library search paths 414ldconfig_paths_aout="/usr/lib/compat/aout /usr/X11R6/lib/aout /usr/local/lib/aout" 415 # a.out shared library search paths 416kern_securelevel_enable="NO" # kernel security level (see init(8)), 417kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure 418lomac_enable="NO" # start lomac(4) security module at boot 419update_motd="YES" # update version info in /etc/motd (or NO) 420start_vinum="NO" # set to YES to start vinum 421unaligned_print="YES" # print unaligned access warnings on the alpha (or NO). 422rand_irqs="NO" # Stir the entropy pool (like "5 11" or NO). 423dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot 424jail_enable="NO" # Set to NO to disable starting of any jails 425jail_list="" # Space separated list of names of jails 426jail_set_hostname_allow="YES" # Allow root user in a jail to change its hostname 427jail_socket_unixiproute_only="YES" # Route only TCP/IP within a jail 428jail_sysvipc_allow="NO" # Allow SystemV IPC use from within a jail 429resident_enable="NO" # Proccess /etc/resident.conf 430varsym_enable="NO" # Proccess /etc/varsym.conf 431watchdogd_enable="NO" # Start the software watchdog daemon 432 433############################################################## 434### Define source_rc_confs, the mechanism used by /etc/rc.* ## 435### scripts to source rc_conf_files overrides safely. ## 436############################################################## 437 438if [ -z "${source_rc_confs_defined}" ]; then 439 source_rc_confs_defined=yes 440 source_rc_confs () { 441 local i sourced_files 442 for i in ${rc_conf_files}; do 443 case ${sourced_files} in 444 *:$i:*) 445 ;; 446 *) 447 sourced_files="${sourced_files}:$i:" 448 if [ -r $i ]; then 449 . $i 450 fi 451 ;; 452 esac 453 done 454 } 455fi 456