1#!/bin/sh 2# 3 4# This is rc.conf - a file full of useful variables that you can set 5# to change the default startup behavior of your system. You should 6# not edit this file! Put any overrides into one of the ${rc_conf_files} 7# instead and you will be able to update these defaults later without 8# spamming your local configuration information. 9# 10# The ${rc_conf_files} files should only contain values which override 11# values set in this file. This eases the upgrade path when defaults 12# are changed and new features are added. 13# 14# All arguments must be in double or single quotes. 15# 16# $FreeBSD: src/etc/defaults/rc.conf,v 1.180 2003/06/26 09:50:50 smkelly Exp $ 17 18############################################################## 19### Important initial Boot-time options #################### 20############################################################## 21 22rc_debug="NO" # Set to YES to enable debugging output from rc.d 23rc_info="YES" # Enables display of informational messages at boot. 24rc_startmsgs="YES" # Show "Starting foo:" messages at boot 25rcshutdown_timeout="30" # Seconds to wait before terminating rc.shutdown 26swapfile="NO" # Set to name of swapfile if aux swapfile desired. 27powerd_enable="NO" # Run powerd to adjust CPU speed. 28powerd_flags="" # additional flags for powerd(8). 29sensorsd_enable="NO" # Run sensorsd to monitor and log sensor state changes. 30sensorsd_flags="" # additional flags for sensorsd(8). 31hotplugd_enable="NO" # Run hotplugd to monitor devices hot plugging. 32hotplugd_flags="" # additional flags for hotplugd(8) 33pccard_ifconfig="NO" # Specialized pccard ethernet configuration (or NO). 34pccard_ether_delay="5" # Delay before trying to start dhclient in pccard_ether 35removable_interfaces="" # Removable network interfaces for /etc/pccard_ether. 36local_startup="/usr/local/etc/rc.d /usr/pkg/etc/rc.d" 37 # startup script dirs. 38script_name_sep=" " # Change if your startup scripts' names contain spaces 39rc_conf_files="/etc/rc.conf /etc/rc.conf.local" 40fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails. 41netfs_types="nfs:NFS smbfs:SMB" # Net filesystems. 42extra_netfs_types="NO" # List of network extra filesystem types for delayed 43 # mount at startup (or NO). 44devfs_config_files="/etc/defaults/devfs.conf /etc/devfs.conf" 45 # Config files for devfs(5) 46 47############################################################## 48### Network configuration sub-section ###################### 49############################################################## 50 51### Basic network and firewall/security options: ### 52# 53# see 'man firewall' for an explanation of the default firewall rules 54# 55hostname="" # Set this! 56nisdomainname="NO" # Set to NIS domain if using NIS (or NO). 57dhclient_program="/sbin/dhclient" # Path to dhcp client program. 58dhclient_flags="-w" # Additional flags to pass to dhcp client. 59firewall_enable="NO" # Set to YES to enable firewall functionality 60firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall 61firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall) 62firewall_trusted_nets="192.168.0.0/16" # list of trusted nets 63firewall_trusted_interfaces="" # list of trusted interfaces e.g. "rl0 xl0" 64firewall_allowed_icmp_types="0 3 8 11 12 13 14" 65firewall_open_tcp_ports="22 25 53 80 113 443" 66firewall_open_udp_ports="53" 67firewall_quiet="NO" # Set to YES to suppress rule display 68firewall_logging="NO" # Set to YES to enable events logging 69firewall_flags="" # Flags passed to ipfw when type is a file 70ip_portrange_first="NO" # Set first dynamically allocated port 71ip_portrange_last="NO" # Set last dynamically allocated port 72ipsec_enable="NO" # Set to YES to run setkey on ipsec_file 73ipsec_file="/etc/ipsec.conf" # Name of config file for setkey 74natd_program="/sbin/natd" # path to natd, if you want a different one. 75natd_enable="NO" # Enable natd (if firewall_enable == YES). 76natd_interface="" # Public interface or IPaddress to use. 77natd_flags="" # Additional flags for natd. 78pf_enable="NO" # Set to YES to enable packet filter (pf) 79pf_rules="/etc/pf.conf" # rules definition file for pf 80pf_program="/usr/sbin/pfctl" # where the pfctl program lives 81pf_flags="" # additional flags for pfctl 82pflog_enable="NO" # Set to YES to enable packet filter logging 83pflog_logfile="/var/log/pflog" # where pflogd should store the logfile 84pflog_program="/usr/sbin/pflogd" # where the pflogd program lives 85pflog_flags="" # additional flags for pflogd 86tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions. 87log_in_vain="0" # >=1 to log connects to ports w/o listeners. 88tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO). 89# For the following option you need to have TCP_DROP_SYNFIN set in your 90# kernel. Please refer to LINT64 details. 91tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN 92 # NOTE: this violates the TCP specification 93icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets 94icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets 95network_interfaces="auto" # List of network interfaces (or "auto"). 96cloned_interfaces="" # List of cloned network interfaces to create. 97#cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning X86_64_GENERIC config. 98ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration. 99#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry. 100#ifconfig_fxp0_name="net0" # Change interface name from fxp0 to net0. 101# 102# If you have any sppp(4) interfaces above, you might also want to set 103# the following parameters. Refer to spppcontrol(8) for their meaning. 104sppp_interfaces="" # List of sppp interfaces. 105#sppp_interfaces="...0" # example: sppp over ... 106#spppconfig_...0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'" 107gif_interfaces="NO" # List of GIF tunnels (or "NO"). 108#gif_interfaces="gif0 gif1" # Examples typically for a router. 109 # Choose correct tunnel addrs. 110#gifconfig_gif0="10.1.1.1 10.1.2.1" # Examples typically for a router. 111#gifconfig_gif1="10.1.1.2 10.1.2.2" # Examples typically for a router. 112 113# User ppp configuration. 114ppp_enable="NO" # Start user-ppp (or NO). 115ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated". 116 # For details see man page for ppp(8). Default is auto. 117ppp_nat="YES" # Use PPP's internal network address translation or NO. 118ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf. 119ppp_user="root" # Which user to run ppp as 120 121### Network daemon (miscellaneous) ### 122syslogd_enable="YES" # Run syslog daemon (or NO). 123syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one. 124#syslogd_flags="-s" # Flags to syslogd (if enabled). 125syslogd_flags="-ss" # Syslogd flags to not bind an inet socket 126inetd_enable="NO" # Run the network daemon dispatcher (YES/NO). 127inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one. 128inetd_flags="-wW" # Optional flags to inetd 129 130rwhod_enable="NO" # Run the rwho daemon (or NO). 131rwhod_flags="" # Flags for rwhod 132rarpd_enable="NO" # Run rarpd (or NO). 133rarpd_flags="" # Flags to rarpd. 134bootparamd_enable="NO" # Run bootparamd (or NO). 135bootparamd_flags="" # Flags to bootparamd 136pppoed_enable="NO" # Run the PPP over Ethernet daemon. 137pppoed_provider="*" # Provider and ppp(8) config file entry. 138pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled). 139pppoed_interface="fxp0" # The interface that pppoed runs on. 140sshd_enable="NO" # Enable sshd 141sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one. 142sshd_flags="" # Additional flags for sshd. 143 144ftpd_enable="NO" # Run stand-alone ftp daemon (or NO). 145ftpd_flags="" # Flags for ftpd, -D added implicitly. 146 147### Network File System (NFS): ### 148### Server-side options also need rpcbind_enable="YES" ### 149### 150### NOTE: attribute cache timeouts only effect NFS lookup rpc's. If 151### the mtime matches the data cache is left intact. 152### 153autofs_enable="NO" # Run automountd(8) 154automount_flags="" # Flags to automount(8) (if autofs enabled). 155automountd_flags="" # Flags to automountd(8) (if autofs enabled). 156autounmountd_flags="" # Flags to autounmountd(8) (if autofs enabled). 157nfs_client_enable="NO" # This host is an NFS client (or NO). 158nfs_access_cache="5" # Client attribute cache timeout in seconds 159#nfs_neg_cache="3" # Client attribute negative hit cache timeout 160nfs_server_enable="NO" # This host is an NFS server (or NO). 161nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled). 162mountd_enable="NO" # Run mountd (or NO). 163mountd_flags="-r" # Flags to mountd (if NFS server enabled). 164weak_mountd_authentication="NO" # Allow non-root mount requests to be served. 165nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO). 166nfs_bufpackets="" # bufspace (in packets) for client 167rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server. 168rpc_lockd_flags="" # Flags to rpc.lockd (if enabled). 169rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server. 170rpc_statd_flags="" # Flags to rpc.statd (if enabled). 171rpc_umntall_enable="YES" # Run NFS rpc.umntall on boot and shutdown 172rpcbind_enable="NO" # Run the portmapper service (YES/NO). 173rpcbind_program="/usr/sbin/rpcbind" # path to rpcbind, if you want a different one. 174rpcbind_flags="" # Flags to rpcbind (if enabled). 175rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO). 176keyserv_enable="NO" # Run the SecureRPC keyserver (or NO). 177keyserv_flags="" # Flags to keyserv (if enabled). 178 179### Network Time Services options: ### 180timed_enable="NO" # Run the time daemon (or NO). 181timed_flags="" # Flags to timed (if enabled). 182dntpd_enable="NO" # Run dntpd Network Time Protocol (or NO). 183dntpd_program="/usr/sbin/dntpd" # path to dntpd, if you want a different one. 184dntpd_flags="" # Flags to dntpd (if enabled) also server name(s) 185 186# Bluetooth deamons and options: 187btconfig_enable="NO" # Configure Bluetooth devices (or NO). 188btconfig_devices="" # List of Bluetooth devices (or empty for all). 189#btconfig_<device>="" # Parameters to pass to <device>. 190btconfig_args="" # Parameters to pass to all devices. 191sdpd_enable="NO" # Run the Service Discovery Profile daemon (or NO). 192sdpd_flags="" # Flags to sdpd (if enabled). 193bthcid_enable="NO" # Run the Bluetooth Link Key/PIN Code Manager (or NO). 194bthcid_flags="" # Flags to bthcid (if enabled). 195 196# Network Information Services (NIS) options: All need rpcbind_enable="YES" ### 197nis_client_enable="NO" # We're an NIS client (or NO). 198nis_client_flags="" # Flags to ypbind (if enabled). 199nis_ypset_enable="NO" # Run ypset at boot time (or NO). 200nis_ypset_flags="" # Flags to ypset (if enabled). 201nis_server_enable="NO" # We're an NIS server (or NO). 202nis_server_flags="" # Flags to ypserv (if enabled). 203nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO). 204nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled). 205nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO). 206nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled). 207 208### Network routing options: ### 209defaultrouter="NO" # Set to default gateway (or NO). 210static_routes="" # Set to static route list (or leave empty). 211gateway_enable="NO" # Set to YES if this host will be a gateway. 212router_enable="NO" # Set to YES to enable a routing daemon. 213router_program="/sbin/routed" # Name of routing daemon to use if enabled. 214router_flags="-q" # Flags for routing daemon. 215mrouted_enable="NO" # Do multicast routing (see /etc/mrouted.conf). 216mrouted_flags="" # Flags for multicast routing daemon. 217arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL. 218forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES") 219accept_sourceroute="NO" # accept source routed packets to us 220 221### Miscellaneous network options: ### 222icmp_bmcastecho="NO" # respond to broadcast ping packets 223 224### IPv6 options: ### 225ipv6_enable="NO" # Set to YES to set up for IPv6. 226ipv6_network_interfaces="auto" # List of network interfaces (or "auto"). 227ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO). 228#ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068) 229ipv6_static_routes="" # Set to static route list (or leave empty). 230#ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64 231 # route toward loopback interface. 232#ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1" 233ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway. 234ipv6_router_enable="NO" # Set to YES to enable an IPv6 routing daemon. 235ipv6_router_program="/usr/sbin/route6d" # Name of IPv6 routing daemon. 236ipv6_router_flags="" # Flags to IPv6 routing daemon. 237#ipv6_router_flags="-l" # Example for route6d with only IPv6 site local 238 # addrs. 239#ipv6_router_flags="-q" # If you want to run a routing daemon on an end 240 # node, you should stop advertisement. 241#ipv6_network_interfaces="ed0 ep0" # Examples for router 242 # or static configuration for end node. 243 # Choose correct prefix value. 244#ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr. 245#ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr. 246#ipv6_ifconfig_ed0="fec0:0:0:5::1 prefixlen 64" # Sample manual assign entry 247#ipv6_ifconfig_ed0_alias0="fec0:0:0:5::2 prefixlen 64" # Sample alias entry. 248ipv6_default_interface="NO" # Default output interface for scoped addrs. 249 # Now this works only for IPv6 link local 250 # multicast addrs. 251rtadvd_enable="NO" # Set to YES to enable an IPv6 router 252 # advertisement daemon. If set to YES, 253 # this router becomes a possible candidate 254 # IPv6 default router for local subnets. 255rtadvd_interfaces="" # Interfaces rtadvd sends RA packets. 256rtsold_enable="NO" # Set to YES to enable an IPv6 routing 257 # solicitation daemon. This is used for 258 # automatic discovery of non-link local 259 # addresses. 260rtsold_flags="-a" # Do autoprobing of outgoing interface. 261mroute6d_enable="NO" # Do IPv6 multicast routing. 262mroute6d_program="/usr/local/sbin/pim6dd" # Name of IPv6 multicast 263 # routing daemon. You need to 264 # install it from package or 265 # port. 266mroute6d_flags="" # Flags to IPv6 multicast routing daemon. 267stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4 268 # tunneling interface. Specify this entry 269 # to enable 6to4 interface. 270stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr, 271 # to limit peer addr range. Effective value 272 # is 0-31. 273stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0. 274 # If you like, you can set "AUTO" for this. 275stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0 276ipv6_faith_prefix="NO" # Set faith prefix to enable a FAITH 277 # IPv6-to-IPv4 TCP translator. You also need 278 # faithd(8) setup. 279ipv6_firewall_enable="NO" # Set to YES to enable IPv6 firewall 280 # functionality 281ipv6_firewall_script="/etc/rc.firewall6" # Which script to run to set up the IPv6 firewall 282ipv6_firewall_type="UNKNOWN" # IPv6 Firewall type (see /etc/rc.firewall6) 283ipv6_firewall_quiet="NO" # Set to YES to suppress rule display 284ipv6_firewall_logging="NO" # Set to YES to enable events logging 285ipv6_firewall_flags="" # Flags passed to ip6fw when type is a file 286 287############################################################## 288### System console options ################################# 289############################################################## 290 291keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO). 292keyrate="NO" # keyboard rate to: slow, normal, fast (or NO). 293keybell="NO" # See kbdcontrol(1) for options. Use "off" to disable. 294keychange="NO" # function keys default values (or NO). 295cursor="NO" # cursor type {normal|blink|destructive} (or NO). 296scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO). 297font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO). 298font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO). 299font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO). 300blanktime="300" # blank time (in seconds) or "NO" to turn it off. 301saver="NO" # screen saver: Uses /modules/${saver}_saver.ko 302moused_nondefault_enable="YES" # Treat non-default mice as enabled unless 303 # specifically overriden in rc.conf(5). 304moused_enable="NO" # Run the mouse daemon. 305moused_type="auto" # See man page for rc.conf(5) for available settings. 306moused_port="/dev/psm0" # Set to your mouse port. 307moused_flags="" # Any additional flags to moused. 308mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your 309 # language code table, specify alternative range 310 # start like mousechar_start=3, see vidcontrol(1) 311vidhistory="" # Set video history buffer size 312allscreens_flags="" # Set this vidcontrol mode for all virtual screens 313allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens 314 315 316############################################################## 317### Mail Transfer Agent (MTA) options ###################### 318############################################################## 319 320mta_start_script="/etc/rc.sendmail" 321 # Script to start your chosen MTA, called by /etc/rc. 322# Settings for /etc/rc.sendmail: 323sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO). 324sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server) 325sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission 326sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost" 327 # Flags for localhost-only MTA 328sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO). 329sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only) 330sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO). 331sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m" 332 # Flags for sendmail_msp_queue daemon. 333sendmail_rebuild_aliases="YES" # Run newaliases if necessary (YES/NO). 334 335 336############################################################## 337### Miscellaneous administrative options ################### 338############################################################## 339 340mixer_enable="YES" # Manage mixer settings across reboots 341cron_enable="YES" # Run the periodic job daemon. 342cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled). 343cron_flags="" # Which options to pass to the cron daemon. 344lpd_enable="NO" # Run the line printer daemon. 345lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one. 346lpd_flags="" # Flags to lpd (if enabled). 347nscd_enable="NO" # Run the nsswitch caching daemon. 348devd_enable="YES" # Run devd, to trigger programs on device tree changes. 349devd_flags="" # Additional flags for devd(8). 350dumpdev="NO" # Device name to crashdump to (or NO). 351dumpdir="/var/crash" # Directory where crash dumps are to be stored 352savecore_flags="" # Used if dumpdev is enabled above, and present. 353crashinfo_enable="YES" # Automatically generate crash dump summary. 354crashinfo_program="/usr/sbin/crashinfo" # Script to generate crash dump summary. 355enable_quotas="NO" # turn on quotas on startup (or NO). 356check_quotas="YES" # Check quotas on startup (or NO). 357accounting_enable="NO" # Turn on process accounting (or NO). 358sysvipcd_enable="NO" # Run the System V IPC daemon at startup (or NO). 359linux_enable="NO" # Linux binary compatibility loaded at startup (or NO). 360clear_tmp_enable="NO" # Clear /tmp at startup. 361ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks 362ldconfig_paths="/lib /usr/lib /usr/local/lib /usr/pkg/lib" 363 # shared library search paths 364ldconfig_local_dirs="/usr/local/libdata/ldconfig" 365 # Local directories with ldconfig configuration files. 366kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure 367update_motd="YES" # update version info in /etc/motd (or NO) 368start_vinum="NO" # set to YES to start vinum 369udevd_enable="NO" # Run udevd(8) daemon. 370udevd_early="NO" # Run udevd(8) daemon early in boot (for lvm). 371lvm_enable="NO" # Run LVM volume discovery. 372entropy_file="/entropy" # Set to NO to disable caching entropy through reboots. 373entropy_save_sz="16384" # Size of the entropy cache files (in bytes) 374rand_irqs="NO" # Stir the entropy pool (like "5 11" or NO). 375dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot 376newsyslog_enable="NO" # Run newsyslog at startup. 377newsyslog_flags="" # Flags to newsyslog (if enabled). 378resident_enable="NO" # Process /etc/resident.conf 379varsym_enable="NO" # Process /etc/varsym.conf 380watchdogd_enable="NO" # Start the software watchdog daemon 381 382############################################################## 383### Jail Configuration ####################################### 384############################################################## 385 386jail_enable="NO" # Set to NO to disable starting of any jails 387jail_list="" # Space separated list of names of jails 388jail_set_hostname_allow="YES" # Allow root user in a jail to change its hostname 389jail_socket_unixiproute_only="YES" # Route only TCP/IP within a jail 390jail_sysvipc_allow="NO" # Allow SystemV IPC use from within a jail 391 392# 393# To use rc's built-in jail infrastructure create entries for 394# each jail, specified in jail_list, with the following variables. 395# NOTES: 396# - replace 'example' with the jail's name. 397# - except rootdir, hostname and ip, all of the following variables may be made 398# global jail variables if you don't specify a jail name (ie. jail_interface). 399# 400#jail_example_rootdir="/usr/jail/default" # Jail's root directory 401#jail_example_hostname="default.domain.com" # Jail's hostname 402#jail_example_ip="192.168.0.10" # Jail's IP number 403#jail_example_interface="" # Interface to create the IP alias on 404#jail_example_exec_start="/bin/sh /etc/rc" # command to execute in jail for starting 405#jail_example_exec_stop="/bin/sh /etc/rc.shutdown" # command to execute in jail for stopping 406#jail_example_procfs_enable="NO" # mount procfs in jail 407#jail_example_devfs_enable="NO" # mount devfs in jail 408#jail_example_mount_enable="NO" # mount/umount jail's fs 409#jail_example_fstab="" # fstab(5) for mount/umount 410#jail_example_flags="-l -U root" # flags for jail(8) 411 412############################################################## 413### VFS quota options ####################################### 414############################################################## 415 416vfs_quota_enable="NO" # Set to YES to enable handling of these vfs quota options 417vfs_quota_sync="" # Space separated list of mount points or "NO" 418 419############################################################## 420### VKernel options ######################################### 421############################################################## 422 423vkernel_enable="NO" # Set to YES to enable starting of vkernels 424vkernel_list="" # Space separated list of names of vkernels 425#vkernel_bin="/boot/kernel.VKERNEL64" # Default path to the vkernel binary 426#vkernel_kill_timeout="45" # Default timeout before a SIGKILL is issued 427 428vknetd_enable="NO" # Bridged networking 429vknetd_flags="-U" # Bridged networking flags 430# 431# Create an entry for each vkernel specified in vkernel_list 432# replacing 'example' by the name of the vkernel. 433# 434#vkernel_example_bin="/boot/kernel.VKERNEL64" 435 # Path to the vkernel binary 436#vkernel_example_memsize="64m" 437 # Amount of memory for the vkernel 438#vkernel_example_rootimg_list="/var/vkernel/rootimg.01" 439 # Space separated list of disk images 440#vkernel_example_iface_list="auto:bridge0" 441 # Optional: space separated list network interfaces for the vkernel 442#vkernel_example_logfile="/dev/null" 443 # Optional: path to the console log file 444#vkernel_example_flags="-U" 445 # Optional: aditional flags to start the vkernel with 446#vkernel_example_kill_timeout="45" 447 # Optional: timeout before SIGKILL is issued when stopping the vkernel 448 449############################################################## 450### Define source_rc_confs, the mechanism used by /etc/rc.* ## 451### scripts to source rc_conf_files overrides safely. ## 452############################################################## 453 454if [ -z "${source_rc_confs_defined}" ]; then 455 source_rc_confs_defined=yes 456 source_rc_confs () { 457 local i sourced_files 458 for i in ${rc_conf_files}; do 459 case ${sourced_files} in 460 *:$i:*) 461 ;; 462 *) 463 sourced_files="${sourced_files}:$i:" 464 if [ -r $i ]; then 465 . $i 466 fi 467 ;; 468 esac 469 done 470 } 471fi 472