xref: /dragonfly/etc/defaults/rc.conf (revision c03f08f3)
1#!/bin/sh
2#
3
4# This is rc.conf - a file full of useful variables that you can set
5# to change the default startup behavior of your system.  You should
6# not edit this file!  Put any overrides into one of the ${rc_conf_files}
7# instead and you will be able to update these defaults later without
8# spamming your local configuration information.
9#
10# The ${rc_conf_files} files should only contain values which override
11# values set in this file.  This eases the upgrade path when defaults
12# are changed and new features are added.
13#
14# All arguments must be in double or single quotes.
15#
16# $FreeBSD: src/etc/defaults/rc.conf,v 1.180 2003/06/26 09:50:50 smkelly Exp $
17# $DragonFly: src/etc/defaults/rc.conf,v 1.42 2007/08/10 21:01:05 swildner Exp $
18
19##############################################################
20###  Important initial Boot-time options  ####################
21##############################################################
22
23rc_debug="NO"		# Set to YES to enable debugging output from rc.d
24rc_info="YES"		# Enables display of informational messages at boot.
25rcshutdown_timeout="30" # Seconds to wait before terminating rc.shutdown
26swapfile="NO"		# Set to name of swapfile if aux swapfile desired.
27apm_enable="NO"		# Set to YES to enable APM BIOS functions (or NO).
28apmd_enable="NO"	# Run apmd to handle APM event from userland.
29apmd_flags=""		# Flags to apmd (if enabled).
30battd_enable="NO"	# Set to YES to have battd alert on 10% battery power remaining.
31battd_flags=""		# Flags to battd (if enabled).
32kldxref_enable="NO"	# Build linker.hints files with kldxref(8).
33kldxref_clobber="NO"	# Overwrite old linker.hints at boot.
34kldxref_module_path=""	# Override kern.module_path. A ';'-delimited list.
35pccard_ifconfig="NO"	# Specialized pccard ethernet configuration (or NO).
36pccard_ether_delay="5"	# Delay before trying to start dhclient in pccard_ether
37removable_interfaces=""	# Removable network interfaces for /etc/pccard_ether.
38local_startup="/usr/pkg/etc/rc.d /usr/local/etc/rc.d /usr/pkg/xorg/etc/rc.d /usr/X11R6/etc/rc.d"
39			# startup script dirs.
40script_name_sep=" "	# Change if your startup scripts' names contain spaces
41rc_conf_files="/etc/rc.conf /etc/rc.conf.local"
42fsck_y_enable="NO"	# Set to YES to do fsck -y if the initial preen fails.
43netfs_types="nfs:NFS smbfs:SMB portalfs:PORTAL nwfs:NWFS" # Net filesystems.
44extra_netfs_types="NO"	# List of network extra filesystem types for delayed
45			# mount at startup (or NO).
46
47##############################################################
48###  Network configuration sub-section  ######################
49##############################################################
50
51### Basic network and firewall/security options: ###
52#
53# see 'man firewall' for an explanation of the default firewall rules
54#
55hostname=""			# Set this!
56nisdomainname="NO"		# Set to NIS domain if using NIS (or NO).
57dhclient_program="/sbin/dhclient"	# Path to dhcp client program.
58dhclient_flags=""		# Additional flags to pass to dhcp client.
59dhcpd_enable="NO"		# Set to YES to enable the DHCP server
60dhcrelay_enable="NO"		# Set to YES to enable the DHCP relay server
61firewall_enable="NO"		# Set to YES to enable firewall functionality
62firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall
63firewall_type="UNKNOWN"		# Firewall type (see /etc/rc.firewall)
64firewall_trusted_nets="192.168.0.0/16" # list of trusted nets
65firewall_trusted_interfaces=""  # list of trusted interfaces e.g. "rl0 xl0"
66firewall_allowed_icmp_types="0 3 8 11 12 13 14"
67firewall_open_tcp_ports="22 25 53 80 113 443"
68firewall_open_udp_ports="53"
69firewall_quiet="NO"		# Set to YES to suppress rule display
70firewall_logging="NO"		# Set to YES to enable events logging
71firewall_flags=""		# Flags passed to ipfw when type is a file
72ip_portrange_first="NO"		# Set first dynamically allocated port
73ip_portrange_last="NO"		# Set last dynamically allocated port
74ipsec_enable="NO"		# Set to YES to run setkey on ipsec_file
75ipsec_file="/etc/ipsec.conf"	# Name of config file for setkey
76natd_program="/sbin/natd"	# path to natd, if you want a different one.
77natd_enable="NO"		# Enable natd (if firewall_enable == YES).
78natd_interface=""		# Public interface or IPaddress to use.
79natd_flags=""			# Additional flags for natd.
80ipfilter_enable="NO"		# Set to YES to enable ipfilter functionality
81ipfilter_program="/sbin/ipf"	# where the ipfilter program lives
82ipfilter_rules="/etc/ipf.rules"	# rules definition file for ipfilter, see
83				# /usr/src/contrib/ipfilter/rules for examples
84ipfilter_flags=""		# additional flags for ipfilter
85ipnat_enable="NO"		# Set to YES to enable ipnat functionality
86ipnat_program="/sbin/ipnat"	# where the ipnat program lives
87ipnat_rules="/etc/ipnat.rules"	# rules definition file for ipnat
88ipnat_flags=""			# additional flags for ipnat
89ipmon_enable="NO"		# Set to YES for ipmon; needs ipfilter or ipnat
90ipmon_program="/sbin/ipmon"	# where the ipfilter monitor program lives
91ipmon_flags="-Ds"		# typically "-Ds" or "-D /var/log/ipflog"
92ipfs_enable="NO"		# Set to YES to enable saving and restoring
93				# of state tables at shutdown and boot
94ipfs_program="/sbin/ipfs"	# where the ipfs program lives
95ipfs_flags=""			# additional flags for ipfs
96pf_enable="NO"			# Set to YES to enable packet filter (pf)
97pf_rules="/etc/pf.conf"		# rules definition file for pf
98pf_program="/usr/sbin/pfctl"	# where the pfctl program lives
99pf_flags=""			# additional flags for pfctl
100pflog_enable="NO"		# Set to YES to enable packet filter logging
101pflog_logfile="/var/log/pflog"	# where pflogd should store the logfile
102pflog_program="/usr/sbin/pflogd"	# where the pflogd program lives
103pflog_flags=""			# additional flags for pflogd
104tcp_extensions="YES"		# Set to NO to turn off RFC1323 extensions.
105log_in_vain="0"			# >=1 to log connects to ports w/o listeners.
106tcp_keepalive="YES"		# Enable stale TCP connection timeout (or NO).
107# For the following option you need to have TCP_DROP_SYNFIN set in your
108# kernel.  Please refer to LINT and NOTES for details.
109tcp_drop_synfin="NO"		# Set to YES to drop TCP packets with SYN+FIN
110				# NOTE: this violates the TCP specification
111icmp_drop_redirect="NO" 	# Set to YES to ignore ICMP REDIRECT packets
112icmp_log_redirect="NO"		# Set to YES to log ICMP REDIRECT packets
113network_interfaces="auto"	# List of network interfaces (or "auto").
114cloned_interfaces=""		# List of cloned network interfaces to create.
115#cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config.
116ifconfig_lo0="inet 127.0.0.1"	# default loopback device configuration.
117#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry.
118#ifconfig_ed0_ipx="ipx 0x00010010"	# Sample IPX address family entry.
119#ifconfig_fxp0_name="net0"	# Change interface name from fxp0 to net0.
120#
121# If you have any sppp(4) interfaces above, you might also want to set
122# the following parameters.  Refer to spppcontrol(8) for their meaning.
123sppp_interfaces=""		# List of sppp interfaces.
124#sppp_interfaces="isp0"		# example: sppp over ISDN
125#spppconfig_isp0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'"
126gif_interfaces="NO"		# List of GIF tunnels (or "NO").
127#gif_interfaces="gif0 gif1"	# Examples typically for a router.
128				# Choose correct tunnel addrs.
129#gifconfig_gif0="10.1.1.1 10.1.2.1"	# Examples typically for a router.
130#gifconfig_gif1="10.1.1.2 10.1.2.2"	# Examples typically for a router.
131
132# User ppp configuration.
133ppp_enable="NO"		# Start user-ppp (or NO).
134ppp_mode="auto"		# Choice of "auto", "ddial", "direct" or "dedicated".
135			# For details see man page for ppp(8). Default is auto.
136ppp_nat="YES"		# Use PPP's internal network address translation or NO.
137ppp_profile="papchap"	# Which profile to use from /etc/ppp/ppp.conf.
138ppp_user="root"		# Which user to run ppp as
139
140### Network daemon (miscellaneous) ###
141hostapd_enable="NO"		# Run hostap daemon.
142syslogd_enable="YES"		# Run syslog daemon (or NO).
143syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one.
144#syslogd_flags="-s"		# Flags to syslogd (if enabled).
145syslogd_flags="-ss"		# Syslogd flags to not bind an inet socket
146inetd_enable="NO"		# Run the network daemon dispatcher (YES/NO).
147inetd_program="/usr/sbin/inetd"	# path to inetd, if you want a different one.
148inetd_flags="-wW"		# Optional flags to inetd
149#
150# named.  It may be possible to run named in a sandbox, man security for
151# details.  Note: when named_chrootdir is specified, RCNG automatically
152# adds '-u bind'.
153#
154named_enable="NO"		# Run named, the DNS server (or NO).
155named_program="/usr/sbin/named"	# path to named, if you want a different one.
156named_pidfile="/var/run/named.pid" # Pid file
157named_chrootdir="/etc/namedb"	# Chroot directory (or "" not to auto-chroot it)
158
159#
160# kerberos. Do not run the admin daemons on slave servers
161#
162kerberos5_server_enable="NO"	# Run a kerberos 5 master server (or NO).
163kerberos5_server_program="/usr/libexec/kdc"	# path to kerberos 5 KDC
164kadmind5_server_enable="NO"	# Run kadmind (or NO)
165kadmind5_server_program="/usr/libexec/kadmind"	# path to kerberos 5 admin daemon
166kpasswdd_server_enable="NO"	# Run kpasswdd (or NO)
167kpasswdd_server_program="/usr/libexec/kpasswdd"	# path to kerberos 5 passwd daemon
168
169rwhod_enable="NO"		# Run the rwho daemon (or NO).
170rwhod_flags=""			# Flags for rwhod
171rarpd_enable="NO"		# Run rarpd (or NO).
172rarpd_flags=""			# Flags to rarpd.
173bootparamd_enable="NO"		# Run bootparamd (or NO).
174bootparamd_flags=""		# Flags to bootparamd
175pppoed_enable="NO"		# Run the PPP over Ethernet daemon.
176pppoed_provider="*"		# Provider and ppp(8) config file entry.
177pppoed_flags="-P /var/run/pppoed.pid"	# Flags to pppoed (if enabled).
178pppoed_interface="fxp0"		# The interface that pppoed runs on.
179sshd_enable="NO"		# Enable sshd
180sshd_program="/usr/sbin/sshd"	# path to sshd, if you want a different one.
181sshd_flags=""			# Additional flags for sshd.
182
183ftpd_enable="NO"		# Run stand-alone ftp daemon (or NO).
184ftpd_flags=""			# Flags for ftpd, -D added implicitly.
185
186### Network File System (NFS): ###
187### Server-side options also need rpcbind_enable="YES" ###
188###
189### NOTE: attribute cache timeouts only effect NFS lookup rpc's.  If
190### the mtime matches the data cache is left intact.
191###
192amd_enable="NO"			# Run amd service with $amd_flags (or NO).
193amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map"
194amd_map_program="NO"		# Can be set to "ypcat -k amd.master"
195nfs_client_enable="NO"		# This host is an NFS client (or NO).
196nfs_client_flags="-n 4"		# Flags to nfsiod (if enabled).
197nfs_access_cache="5"		# Client attribute cache timeout in seconds
198#nfs_neg_cache="3"		# Client attribute negative hit cache timeout
199nfs_server_enable="NO"		# This host is an NFS server (or NO).
200nfs_server_flags="-u -t -n 4"	# Flags to nfsd (if enabled).
201mountd_enable="NO"		# Run mountd (or NO).
202mountd_flags="-r"		# Flags to mountd (if NFS server enabled).
203weak_mountd_authentication="NO"	# Allow non-root mount requests to be served.
204nfs_reserved_port_only="NO"	# Provide NFS only on secure port (or NO).
205nfs_bufpackets=""		# bufspace (in packets) for client
206rpc_lockd_enable="NO"		# Run NFS rpc.lockd needed for client/server.
207rpc_statd_enable="NO"		# Run NFS rpc.statd needed for client/server.
208rpc_umntall_enable="YES"	# Run NFS rpc.umntall on boot and shutdown
209rpcbind_enable="NO"		# Run the portmapper service (YES/NO).
210# this is rpcbind in 5.x
211rpcbind_program="/usr/sbin/portmap"	# path to rpcbind, if you want a different one.
212rpcbind_flags=""		# Flags to rpcbind (if enabled).
213rpc_ypupdated_enable="NO"	# Run if NIS master and SecureRPC (or NO).
214keyserv_enable="NO"		# Run the SecureRPC keyserver (or NO).
215keyserv_flags=""		# Flags to keyserv (if enabled).
216
217### Network Time Services options: ###
218timed_enable="NO"		# Run the time daemon (or NO).
219timed_flags=""			# Flags to timed (if enabled).
220ntpd_enable="NO"		# Run ntpd Network Time Protocol (or NO).
221ntpd_program="/usr/sbin/ntpd"	# path to ntpd, if you want a different one.
222ntpd_flags="-s"			# Flags to ntpd (if enabled).
223dntpd_enable="NO"		# Run dntpd Network Time Protocol (or NO).
224dntpd_program="/usr/sbin/dntpd"	# path to dntpd, if you want a different one.
225dntpd_flags=""			# Flags to dntpd (if enabled) also server name(s)
226
227# Network Information Services (NIS) options: All need rpcbind_enable="YES" ###
228nis_client_enable="NO"		# We're an NIS client (or NO).
229nis_client_flags=""		# Flags to ypbind (if enabled).
230nis_ypset_enable="NO"		# Run ypset at boot time (or NO).
231nis_ypset_flags=""		# Flags to ypset (if enabled).
232nis_server_enable="NO"		# We're an NIS server (or NO).
233nis_server_flags=""		# Flags to ypserv (if enabled).
234nis_ypxfrd_enable="NO"		# Run rpc.ypxfrd at boot time (or NO).
235nis_ypxfrd_flags=""		# Flags to rpc.ypxfrd (if enabled).
236nis_yppasswdd_enable="NO"	# Run rpc.yppasswdd at boot time (or NO).
237nis_yppasswdd_flags=""		# Flags to rpc.yppasswdd (if enabled).
238
239### Network routing options: ###
240defaultrouter="NO"		# Set to default gateway (or NO).
241static_routes=""		# Set to static route list (or leave empty).
242gateway_enable="NO"		# Set to YES if this host will be a gateway.
243router_enable="NO"		# Set to YES to enable a routing daemon.
244router_program="/sbin/routed"		# Name of routing daemon to use if enabled.
245router_flags="-q"		# Flags for routing daemon.
246mrouted_enable="NO"		# Do multicast routing (see /etc/mrouted.conf).
247mrouted_flags=""		# Flags for multicast routing daemon.
248ipxgateway_enable="NO"		# Set to YES to enable IPX routing.
249ipxrouted_enable="NO"		# Set to YES to run the IPX routing daemon.
250ipxrouted_flags=""		# Flags for IPX routing daemon.
251arpproxy_all="NO"		# replaces obsolete kernel option ARP_PROXYALL.
252forward_sourceroute="NO"	# do source routing (only if gateway_enable is set to "YES")
253accept_sourceroute="NO"		# accept source routed packets to us
254
255### ATM interface options: ###
256atm_enable="NO"			# Configure ATM interfaces (or NO).
257#atm_netif_hea0="atm 1"		# Network interfaces for physical interface.
258#atm_sigmgr_hea0="uni31"	# Signalling manager for physical interface.
259#atm_prefix_hea0="ILMI"		# NSAP prefix (UNI interfaces only) (or ILMI).
260#atm_macaddr_hea0="NO"		# Override physical MAC address (or NO).
261#atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local).
262#atm_scsparp_atm0="NO"		# Run SCSP/ATMARP on network interface (or NO).
263atm_arps=""			# Set to permanent ARP list (or leave empty).
264
265### ISDN interface options: (see also: /usr/share/examples/isdn) ###
266isdn_enable="NO"		# Enable the ISDN subsystem (or NO).
267isdn_fsdev="NO"			# Output device for fullscreen mode (or NO for daemon mode).
268isdn_flags="-dn -d0x1f9"	# Flags for isdnd
269isdn_ttype="cons25"		# terminal type for fullscreen mode
270isdn_screenflags="NO"		# screenflags for ${isdn_fsdev}
271isdn_trace="NO"			# Enable the ISDN trace subsystem (or NO).
272isdn_traceflags="-f /var/tmp/isdntrace0"	# Flags for isdntrace
273
274### Miscellaneous network options: ###
275icmp_bmcastecho="NO"	# respond to broadcast ping packets
276
277### IPv6 options: ###
278ipv6_enable="NO"		# Set to YES to set up for IPv6.
279ipv6_network_interfaces="auto"	# List of network interfaces (or "auto").
280ipv6_defaultrouter="NO"		# Set to IPv6 default gateway (or NO).
281#ipv6_defaultrouter="2002:c058:6301::"	# Use this for 6to4 (RFC 3068)
282ipv6_static_routes=""		# Set to static route list (or leave empty).
283#ipv6_static_routes="xxx"	# An example to set fec0:0000:0000:0006::/64
284				#  route toward loopback interface.
285#ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1"
286ipv6_gateway_enable="NO"	# Set to YES if this host will be a gateway.
287ipv6_router_enable="NO"		# Set to YES to enable an IPv6 routing daemon.
288ipv6_router_program="/usr/sbin/route6d"	# Name of IPv6 routing daemon.
289ipv6_router_flags=""		# Flags to IPv6 routing daemon.
290#ipv6_router_flags="-l"		# Example for route6d with only IPv6 site local
291				# addrs.
292#ipv6_router_flags="-q"		# If you want to run a routing daemon on an end
293				# node, you should stop advertisement.
294#ipv6_network_interfaces="ed0 ep0"	# Examples for router
295					# or static configuration for end node.
296					# Choose correct prefix value.
297#ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002"  # Examples for rtr.
298#ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004"  # Examples for rtr.
299#ipv6_ifconfig_ed0="fec0:0:0:5::1 prefixlen 64"	# Sample manual assign entry
300#ipv6_ifconfig_ed0_alias0="fec0:0:0:5::2 prefixlen 64" # Sample alias entry.
301ipv6_default_interface="NO"	# Default output interface for scoped addrs.
302				# Now this works only for IPv6 link local
303				# multicast addrs.
304rtadvd_enable="NO"		# Set to YES to enable an IPv6 router
305				# advertisement daemon. If set to YES,
306				# this router becomes a possible candidate
307				# IPv6 default router for local subnets.
308rtadvd_interfaces=""		# Interfaces rtadvd sends RA packets.
309rtsold_enable="NO"		# Set to YES to enable an IPv6 routing
310				# solicitation daemon.  This is used for
311				# automatic discovery of non-link local
312				# addresses.
313rtsold_flags="-a"		# Do autoprobing of outgoing interface.
314mroute6d_enable="NO"		# Do IPv6 multicast routing.
315mroute6d_program="/usr/local/sbin/pim6dd"	# Name of IPv6 multicast
316						# routing daemon.  You need to
317						# install it from package or
318						# port.
319mroute6d_flags=""		# Flags to IPv6 multicast routing daemon.
320stf_interface_ipv4addr=""	# Local IPv4 addr for 6to4 IPv6 over IPv4
321				# tunneling interface. Specify this entry
322				# to enable 6to4 interface.
323stf_interface_ipv4plen="0"	# Prefix length for 6to4 IPv4 addr,
324				# to limit peer addr range. Effective value
325				# is 0-31.
326stf_interface_ipv6_ifid="0:0:0:1"	# IPv6 interface id for stf0.
327				# If you like, you can set "AUTO" for this.
328stf_interface_ipv6_slaid="0000"	# IPv6 Site Level Aggregator for stf0
329ipv6_faith_prefix="NO"		# Set faith prefix to enable a FAITH
330				# IPv6-to-IPv4 TCP translator.  You also need
331				# faithd(8) setup.
332ipv6_ipv4mapping="NO"		# Set to "YES" to enable IPv4 mapped IPv6 addr
333				# communication. (like ::ffff:a.b.c.d)
334ipv6_firewall_enable="NO"	# Set to YES to enable IPv6 firewall
335				# functionality
336ipv6_firewall_script="/etc/rc.firewall6" # Which script to run to set up the IPv6 firewall
337ipv6_firewall_type="UNKNOWN"	# IPv6 Firewall type (see /etc/rc.firewall6)
338ipv6_firewall_quiet="NO"	# Set to YES to suppress rule display
339ipv6_firewall_logging="NO"	# Set to YES to enable events logging
340ipv6_firewall_flags=""		# Flags passed to ip6fw when type is a file
341ipv6_ipfilter_rules="/etc/ipf6.rules"	# rules definition file for ipfilter,
342					# see /usr/src/contrib/ipfilter/rules
343					# for examples
344
345##############################################################
346###  System console options  #################################
347##############################################################
348
349keymap="NO"		# keymap in /usr/share/syscons/keymaps/* (or NO).
350keyrate="NO"		# keyboard rate to: slow, normal, fast (or NO).
351keybell="NO" 		# See kbdcontrol(1) for options.  Use "off" to disable.
352keychange="NO"		# function keys default values (or NO).
353cursor="NO"		# cursor type {normal|blink|destructive} (or NO).
354scrnmap="NO"		# screen map in /usr/share/syscons/scrnmaps/* (or NO).
355font8x16="NO"		# font 8x16 from /usr/share/syscons/fonts/* (or NO).
356font8x14="NO"		# font 8x14 from /usr/share/syscons/fonts/* (or NO).
357font8x8="NO"		# font 8x8 from /usr/share/syscons/fonts/* (or NO).
358blanktime="300"		# blank time (in seconds) or "NO" to turn it off.
359saver="NO"		# screen saver: Uses /modules/${saver}_saver.ko
360moused_enable="NO"	# Run the mouse daemon.
361moused_type="auto"	# See man page for rc.conf(5) for available settings.
362moused_port="/dev/psm0"	# Set to your mouse port.
363moused_flags=""		# Any additional flags to moused.
364mousechar_start="NO"	# if 0xd0-0xd3 default range is occupied in your
365			# language code table, specify alternative range
366			# start like mousechar_start=3, see vidcontrol(1)
367vidhistory=""		# Set video history buffer size
368allscreens_flags=""	# Set this vidcontrol mode for all virtual screens
369allscreens_kbdflags=""	# Set this kbdcontrol mode for all virtual screens
370
371
372##############################################################
373###  Mail Transfer Agent (MTA) options  ######################
374##############################################################
375
376mta_start_script="/etc/rc.sendmail"
377			# Script to start your chosen MTA, called by /etc/rc.
378# Settings for /etc/rc.sendmail:
379sendmail_enable="NO"	# Run the sendmail inbound daemon (YES/NO).
380sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server)
381sendmail_submit_enable="YES"	# Start a localhost-only MTA for mail submission
382sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost"
383				# Flags for localhost-only MTA
384sendmail_outbound_enable="YES"	# Dequeue stuck mail (YES/NO).
385sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only)
386sendmail_msp_queue_enable="YES"	# Dequeue stuck clientmqueue mail (YES/NO).
387sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m"
388				# Flags for sendmail_msp_queue daemon.
389
390
391##############################################################
392###  Miscellaneous administrative options  ###################
393##############################################################
394
395mixer_enable="NO"	# Manage mixer settings across reboots
396cron_enable="YES"	# Run the periodic job daemon.
397cron_program="/usr/sbin/cron"	# Which cron executable to run (if enabled).
398cron_flags=""		# Which options to pass to the cron daemon.
399lpd_enable="NO"		# Run the line printer daemon.
400lpd_program="/usr/sbin/lpd"	# path to lpd, if you want a different one.
401lpd_flags=""		# Flags to lpd (if enabled).
402usbd_enable="NO"	# Run the usbd daemon.
403usbd_flags=""		# Flags to usbd (if enabled).
404dumpdev="NO"		# Device name to crashdump to (or NO).
405dumpdir="/var/crash"	# Directory where crash dumps are to be stored
406savecore_flags=""	# Used if dumpdev is enabled above, and present.
407enable_quotas="NO"	# turn on quotas on startup (or NO).
408check_quotas="YES"	# Check quotas on startup (or NO).
409accounting_enable="NO"	# Turn on process accounting (or NO).
410sysvipc_enable="NO"	# Load System V IPC primitives at startup (or NO).
411linux_enable="NO"	# Linux binary compatibility loaded at startup (or NO).
412clear_tmp_enable="NO"	# Clear /tmp at startup.
413ldconfig_insecure="NO"	# Set to YES to disable ldconfig security checks
414ldconfig_paths="/usr/lib/compat /usr/pkg/lib /usr/pkg/xorg/lib /usr/local/lib"
415			# shared library search paths
416kern_securelevel="-1"	# range: -1..3 ; `-1' is the most insecure
417update_motd="YES"	# update version info in /etc/motd (or NO)
418start_vinum="NO"	# set to YES to start vinum
419rand_irqs="NO"		# Stir the entropy pool (like "5 11" or NO).
420dmesg_enable="YES"	# Save dmesg(8) to /var/run/dmesg.boot
421resident_enable="NO"	# Process /etc/resident.conf
422varsym_enable="NO"	# Process /etc/varsym.conf
423watchdogd_enable="NO"	# Start the software watchdog daemon
424
425##############################################################
426### Jail Configuration #######################################
427##############################################################
428
429jail_enable="NO"	# Set to NO to disable starting of any jails
430jail_list=""		# Space separated list of names of jails
431jail_set_hostname_allow="YES" # Allow root user in a jail to change its hostname
432jail_socket_unixiproute_only="YES" # Route only TCP/IP within a jail
433jail_sysvipc_allow="NO"	# Allow SystemV IPC use from within a jail
434
435#
436# To use rc's built-in jail infrastructure create entries for
437# each jail, specified in jail_list, with the following variables.
438# NOTES:
439# - replace 'example' with the jail's name.
440# - except rootdir, hostname and ip, all of the following variables may be made
441#   global jail variables if you don't specify a jail name (ie. jail_interface).
442#
443#jail_example_rootdir="/usr/jail/default"	# Jail's root directory
444#jail_example_hostname="default.domain.com"	# Jail's hostname
445#jail_example_ip="192.168.0.10"			# Jail's IP number
446#jail_example_interface=""			# Interface to create the IP alias on
447#jail_example_exec_start="/bin/sh /etc/rc"		# command to execute in jail for starting
448#jail_example_exec_stop="/bin/sh /etc/rc.shutdown"	# command to execute in jail for stopping
449#jail_example_fdesc_enable="NO"			# mount fdesc in the jail
450#jail_example_procfs_enable="NO"		# mount procfs in jail
451#jail_example_mount_enable="NO"			# mount/umount jail's fs
452#jail_example_fstab=""				# fstab(5) for mount/umount
453#jail_example_flags="-l -U root"		# flags for jail(8)
454
455##############################################################
456### Define source_rc_confs, the mechanism used by /etc/rc.* ##
457### scripts to source rc_conf_files overrides safely.	    ##
458##############################################################
459
460if [ -z "${source_rc_confs_defined}" ]; then
461	source_rc_confs_defined=yes
462	source_rc_confs () {
463		local i sourced_files
464		for i in ${rc_conf_files}; do
465			case ${sourced_files} in
466			*:$i:*)
467				;;
468			*)
469				sourced_files="${sourced_files}:$i:"
470				if [ -r $i ]; then
471					. $i
472				fi
473				;;
474			esac
475		done
476	}
477fi
478