1# @(#)Makefile 8.2 (Berkeley) 1/4/94 2# $FreeBSD: src/include/Makefile,v 1.109.2.27 2003/01/24 05:12:29 sam Exp $ 3# $DragonFly: src/include/Makefile,v 1.42 2008/11/24 13:35:57 hasso Exp $ 4# 5# Doing a make install builds /usr/include 6# 7# The ``rm -rf''s used below are safe because rm doesn't follow symbolic 8# links. 9 10CLEANFILES= osreldate.h version vers.c 11SUBDIR= arpa protocols rpc rpcsvc 12INCS= a.out.h ar.h assert.h bitstring.h complex.h cpio.h ctype.h db.h \ 13 dirent.h disktab.h \ 14 dlfcn.h elf.h elf-hints.h err.h fmtmsg.h fnmatch.h fstab.h \ 15 fts.h ftw.h getopt.h glob.h grp.h histedit.h \ 16 iconv.h ieeefp.h ifaddrs.h iso646.h inttypes.h \ 17 langinfo.h libgen.h limits.h link.h locale.h malloc.h math.h memory.h \ 18 mpool.h mqueue.h monetary.h ndbm.h netconfig.h \ 19 netdb.h nl_types.h nlist.h nss.h nsswitch.h objformat.h \ 20 paths.h printf.h pthread.h pthread_np.h pwd.h \ 21 ranlib.h readpassphrase.h regex.h regexp.h \ 22 res_update.h resolv.h re_comp.h rmd160.h \ 23 search.h setjmp.h sgtty.h \ 24 signal.h spawn.h stab.h stdarg.h stdbool.h \ 25 stddef.h stdint.h stdio.h stdlib.h \ 26 string.h stringlist.h strings.h struct.h sysexits.h tar.h time.h \ 27 timeconv.h \ 28 timers.h ttyent.h unistd.h ulimit.h utime.h utmp.h uuid.h vis.h \ 29 wchar.h wctype.h wordexp.h 30 31.if defined(WANT_HESIOD) 32INCS+= hesiod.h 33.endif 34 35MHDRS= float.h floatingpoint.h varargs.h 36 37# Only for default SHARED=copies case 38SHDRS= soundcard.h joystick.h 39 40LHDRS= aio.h errno.h fcntl.h linker_set.h poll.h sched.h \ 41 semaphore.h syslog.h termios.h ucontext.h 42 43# directories which also contain header files that need to be copied. 44# Other directories, like 'bus' and 'netproto', are created using mtree. 45# 46# XXX allow these directories to not contain header files. 47LDIRS= net netbt netgraph netinet netinet6 sys vm 48 49# Subdirectories containing header files to copy. In symlink mode 50# the subdirectory will be symlinked. Care must be taken to adjust 51# LSYMSUBDIRS below to remove subdirectories whos parent directories. 52# If you make a mistake, part of your source tree might get overwritten 53# when buildworld is run. 54# 55LSUBDIRS= bus/cam bus/cam/scsi \ 56 emulation/linux \ 57 vfs/msdosfs vfs/nfs vfs/ntfs vfs/nwfs \ 58 vfs/smbfs vfs/udf vfs/ufs vfs/hammer \ 59 net/vlan net/ipfw net/ip6fw net/dummynet net/sppp net/ip_mroute \ 60 net/bridge net/tap net/tun net/ppp net/ppp_layer net/sl \ 61 net/pf net/altq \ 62 netgraph/UI netgraph/async netgraph/bpf netgraph/bridge \ 63 netgraph/cisco netgraph/echo netgraph/eiface netgraph/etf \ 64 netgraph/ether netgraph/fec netgraph/frame_relay netgraph/hole \ 65 netgraph/iface netgraph/ksocket netgraph/l2tp netgraph/lmi \ 66 netgraph/mppc netgraph/one2many netgraph/ppp \ 67 netgraph/pppoe netgraph/pptpgre netgraph/rfc1490 netgraph/socket \ 68 netgraph/tee netgraph/tty netgraph/vjc \ 69 bus/cam bus/usb bus/pccard bus/pci bus/isa bus/ppbus \ 70 netproto/atalk netproto/atm netproto/ipsec netproto/ipx \ 71 netproto/key netproto/natm netproto/ncp netproto/ns netproto/smb \ 72 netproto/atm/ipatm netproto/atm/sigpvc netproto/atm/spans \ 73 netproto/atm/uni netproto/802_11 netproto/mpls 74 75LSUBDIRS3= vfs/isofs/cd9660 net/i4b/include \ 76 dev/disk/mpt/mpilib \ 77 dev/misc/lpt dev/misc/ppi \ 78 dev/netif/wi \ 79 dev/raid/ciss \ 80 dev/video/bktr dev/video/meteor 81 82# For SHARED=symlinks, bus/cam and netproto/atm are symlinks, so cam/scsi 83# and netproto/atm/* are taken care of 84LSYMSUBDIRS= ${LSUBDIRS:Nbus/cam/scsi:Nnetproto/atm/*:Nnet/*:Nnetgraph/*} 85LSYMSUBDIRS3= ${LSUBDIRS3:Nnet/*} 86 87# For obsolete headers which need to be removed 88RMHEADERS= machine/ansi.h sys/inttypes.h 89 90# Define SHARED to indicate whether you want symbolic links to the system 91# source (``symlinks''), or a separate copy (``copies''). ``symlinks'' is 92# probably only useful for developers and should be avoided if you do not 93# wish to tie your /usr/include and /usr/src together. 94#SHARED= symlinks 95SHARED?= copies 96 97INCS+= osreldate.h 98 99osreldate.h: ${.CURDIR}/../sys/conf/newvers.sh \ 100 ${.CURDIR}/../sys/sys/param.h 101 @${ECHO} creating osreldate.h from newvers.sh 102 setvar PARAMFILE ${.CURDIR}/../sys/sys/param.h; \ 103 . ${.CURDIR}/../sys/conf/newvers.sh; \ 104 echo "$$COPYRIGHT" > osreldate.h; \ 105 echo "#ifdef _KERNEL" >> osreldate.h; \ 106 echo '#error "osreldate.h must not be used in the kernel, use sys/param.h"' >> osreldate.h; \ 107 echo "#else" >> osreldate.h; \ 108 echo "#undef __DragonFly_version" >> osreldate.h; \ 109 echo "#define __DragonFly_version $$RELDATE" >> osreldate.h; \ 110 echo "#ifdef __FreeBSD__" >> osreldate.h; \ 111 echo "#undef __FreeBSD_version" >> osreldate.h; \ 112 echo "#define __FreeBSD_version 480101" >> osreldate.h; \ 113 echo "#endif" >> osreldate.h; \ 114 echo "#endif" >> osreldate.h 115 116.for i in ${LHDRS} 117INCSLINKS+= sys/$i ${INCLUDEDIR}/$i 118.endfor 119.for i in ${MHDRS} 120INCSLINKS+= machine/$i ${INCLUDEDIR}/$i 121.endfor 122INCSLINKS+= bus/cam ${INCLUDEDIR}/cam 123INCSLINKS+= vfs/msdosfs ${INCLUDEDIR}/msdosfs 124INCSLINKS+= vfs/isofs ${INCLUDEDIR}/isofs 125INCSLINKS+= vfs/mfs ${INCLUDEDIR}/mfs 126INCSLINKS+= vfs/nfs ${INCLUDEDIR}/nfs 127INCSLINKS+= vfs/ntfs ${INCLUDEDIR}/ntfs 128INCSLINKS+= vfs/nwfs ${INCLUDEDIR}/nwfs 129INCSLINKS+= vfs ${INCLUDEDIR}/fs 130# this is for <ufs/ufs/...> and <ufs/ffs/...> paths used by ports 131# It is hopefully a temporary hack until we have environments working. 132INCSLINKS+= vfs ${INCLUDEDIR}/ufs 133INCSLINKS+= ufs ${INCLUDEDIR}/vfs/ffs 134INCSLINKS+= emulation ${INCLUDEDIR}/compat 135INCSLINKS+= netproto/atalk ${INCLUDEDIR}/netatalk 136INCSLINKS+= netproto/atm ${INCLUDEDIR}/netatm 137INCSLINKS+= netproto/ipsec ${INCLUDEDIR}/netipsec 138INCSLINKS+= netproto/ipx ${INCLUDEDIR}/netipx 139INCSLINKS+= netproto/key ${INCLUDEDIR}/netkey 140INCSLINKS+= netproto/natm ${INCLUDEDIR}/netnatm 141INCSLINKS+= netproto/ncp ${INCLUDEDIR}/netncp 142INCSLINKS+= netproto/ns ${INCLUDEDIR}/netns 143INCSLINKS+= netproto/smb ${INCLUDEDIR}/netsmb 144INCSLINKS+= bus/pccard ${INCLUDEDIR}/pccard 145 146# NOTE! 147# 148# machine/ header files come from the platform architecture and 149# cpu/ header files come from the cpu architecture. All code outside 150# of the machine header files ALWAYS #include's <machine/blah.h>. So 151# if the platform architecture is missing a header file we have to 152# copy it in from the cpu architecture. This way we do not have to 153# create dozens of pure forwarding headers for files that platform 154# architecture does not need to enhance. 155 156mtree_setup: 157.for i in ${LDIRS} ${LSYMSUBDIRS} ${LSYMSUBDIRS3} machine cpu crypto dev/acpica 158 if [ -h ${DESTDIR}/usr/include/$i ]; then \ 159 rm -f ${DESTDIR}/usr/include/$i; \ 160 fi 161.endfor 162 mtree -deU -f ${.CURDIR}/../etc/mtree/BSD.include.dist \ 163 -p ${DESTDIR}/usr/include 164 165copies: mtree_setup 166.for i in ${LDIRS} ${LSUBDIRS} ${LSUBDIRS3} 167 cd ${.CURDIR}/../sys; \ 168 ${INSTALL} -C -o ${BINOWN} -g ${BINGRP} -m 444 $i/*.h \ 169 ${DESTDIR}/usr/include/$i 170.endfor 171 cd ${.CURDIR}/../sys; \ 172 ${INSTALL} -C -o ${BINOWN} -g ${BINGRP} -m 444 crypto/rijndael/rijndael.h \ 173 ${DESTDIR}/usr/include/crypto; \ 174 ${INSTALL} -C -o ${BINOWN} -g ${BINGRP} -m 444 opencrypto/*.h \ 175 ${DESTDIR}/usr/include/crypto 176 cd ${.CURDIR}/../sys/dev/acpica5; \ 177 ${INSTALL} -C -o ${BINOWN} -g ${BINGRP} -m 444 acpiio.h \ 178 ${DESTDIR}/usr/include/dev/acpica 179.if exists(${.CURDIR}/../sys/cpu/${MACHINE_ARCH}/include) 180 cd ${.CURDIR}/../sys/cpu/${MACHINE_ARCH}/include; \ 181 ${INSTALL} -C -o ${BINOWN} -g ${BINGRP} -m 444 *.h \ 182 ${DESTDIR}/usr/include/cpu 183 # XXX this will cause quickworld to rebuild more junk 184 # then it needs to. 185 cpdup -o ${DESTDIR}/usr/include/cpu ${DESTDIR}/usr/include/machine 186.endif 187.if exists(${.CURDIR}/../sys/platform/${MACHINE_PLATFORM}/include) 188 cd ${.CURDIR}/../sys/platform/${MACHINE_PLATFORM}/include; \ 189 ${INSTALL} -C -o ${BINOWN} -g ${BINGRP} -m 444 *.h \ 190 ${DESTDIR}/usr/include/machine 191.if exists(${.CURDIR}/../sys/platform/${MACHINE_PLATFORM}/include/pc) 192 cd ${.CURDIR}/../sys/platform/${MACHINE_PLATFORM}/include/pc; \ 193 ${INSTALL} -C -o ${BINOWN} -g ${BINGRP} -m 444 *.h \ 194 ${DESTDIR}/usr/include/machine/pc 195.endif 196.endif 197.if exists(${.CURDIR}/../sys/net/i4b/include/${MACHINE_ARCH}) 198 cd ${.CURDIR}/../sys/net/i4b/include/${MACHINE_ARCH}; \ 199 ${INSTALL} -C -o ${BINOWN} -g ${BINGRP} -m 444 *.h \ 200 ${DESTDIR}/usr/include/i4b_machine 201.endif 202.for i in ${SHDRS} 203 ${LN} -sf ../sys/$i ${DESTDIR}/usr/include/machine/$i 204.endfor 205.for i in ${RMHEADERS} 206 rm -f ${DESTDIR}/usr/include/$i 207.endfor 208 209symlinks: mtree_setup 210 @${ECHO} "Setting up symlinks to kernel source tree..." 211.for i in ${LDIRS} 212 rm -rf ${DESTDIR}/usr/include/$i 213 ${LN} -s ../../sys/$i ${DESTDIR}/usr/include/$i 214.endfor 215 rm -rf ${DESTDIR}/usr/include/crypto 216 ${LN} -s ../../sys/opencrypto ${DESTDIR}/usr/include/crypto 217.for i in ${LSYMSUBDIRS} 218 rm -rf ${DESTDIR}/usr/include/$i 219 ${LN} -s ../../../sys/$i ${DESTDIR}/usr/include/$i 220.endfor 221.for i in ${LSYMSUBDIRS3} 222 rm -rf ${DESTDIR}/usr/include/$i 223 ${LN} -s ../../../../sys/$i ${DESTDIR}/usr/include/$i 224.endfor 225 rm -rf ${DESTDIR}/usr/include/cpu 226 ${LN} -s ../../sys/cpu/${MACHINE_ARCH}/include ${DESTDIR}/usr/include/cpu 227 rm -rf ${DESTDIR}/usr/include/machine 228 cpdup ${.CURDIR}/../sys/cpu/${MACHINE_ARCH}/include \ 229 ${DESTDIR}/usr/include/machine 230 cpdup -o ${.CURDIR}/../sys/platform/${MACHINE_PLATFORM}/include \ 231 ${DESTDIR}/usr/include/machine 232 rm -rf ${DESTDIR}/usr/include/i4b_machine 233 ${LN} -s ../../sys/net/i4b/include/${MACHINE_ARCH} ${DESTDIR}/usr/include/i4b_machine 234 235.include <bsd.prog.mk> 236 237installincludes: ${SHARED} 238