1# @(#)Makefile 8.2 (Berkeley) 1/4/94 2# $FreeBSD: src/include/Makefile,v 1.109.2.27 2003/01/24 05:12:29 sam Exp $ 3# $DragonFly: src/include/Makefile,v 1.39 2008/07/07 22:02:09 nant Exp $ 4# 5# Doing a make install builds /usr/include 6# 7# The ``rm -rf''s used below are safe because rm doesn't follow symbolic 8# links. 9 10CLEANFILES= osreldate.h version vers.c 11SUBDIR= arpa protocols rpc rpcsvc 12INCS= a.out.h ar.h assert.h bitstring.h complex.h cpio.h ctype.h db.h \ 13 dirent.h disktab.h \ 14 dlfcn.h elf.h elf-hints.h err.h fnmatch.h fstab.h \ 15 fts.h getopt.h glob.h grp.h histedit.h iconv.h ieeefp.h ifaddrs.h \ 16 iso646.h inttypes.h \ 17 langinfo.h libgen.h limits.h link.h locale.h malloc.h math.h memory.h \ 18 mpool.h ndbm.h netdb.h nl_types.h nlist.h objformat.h \ 19 paths.h pthread.h pthread_np.h pwd.h \ 20 ranlib.h readpassphrase.h regex.h regexp.h resolv.h re_comp.h rmd160.h \ 21 search.h setjmp.h sgtty.h \ 22 signal.h stab.h stdarg.h stdbool.h stddef.h stdint.h stdio.h stdlib.h \ 23 string.h stringlist.h strings.h struct.h sysexits.h tar.h time.h \ 24 timers.h ttyent.h unistd.h ulimit.h utime.h utmp.h uuid.h vis.h \ 25 wchar.h wctype.h 26 27MHDRS= float.h floatingpoint.h varargs.h 28 29# Only for default SHARED=copies case 30SHDRS= soundcard.h joystick.h 31 32LHDRS= aio.h errno.h fcntl.h linker_set.h mqueue.h poll.h sched.h \ 33 semaphore.h syslog.h termios.h ucontext.h 34 35# directories which also contain header files that need to be copied. 36# Other directories, like 'bus' and 'netproto', are created using mtree. 37# 38# XXX allow these directories to not contain header files. 39LDIRS= net netbt netgraph netinet netinet6 sys vm 40 41# Subdirectories containing header files to copy. In symlink mode 42# the subdirectory will be symlinked. Care must be taken to adjust 43# LSYMSUBDIRS below to remove subdirectories whos parent directories. 44# If you make a mistake, part of your source tree might get overwritten 45# when buildworld is run. 46# 47LSUBDIRS= bus/cam bus/cam/scsi \ 48 emulation/linux \ 49 vfs/msdosfs vfs/nfs vfs/ntfs vfs/nwfs \ 50 vfs/smbfs vfs/udf vfs/ufs vfs/hammer \ 51 net/vlan net/ipfw net/ip6fw net/dummynet net/sppp net/ip_mroute \ 52 net/bridge net/tap net/tun net/ppp net/ppp_layer net/sl \ 53 net/pf net/altq \ 54 netgraph/UI netgraph/async netgraph/bpf netgraph/bridge \ 55 netgraph/cisco netgraph/echo netgraph/eiface netgraph/etf \ 56 netgraph/ether netgraph/fec netgraph/frame_relay netgraph/hole \ 57 netgraph/iface netgraph/ksocket netgraph/l2tp netgraph/lmi \ 58 netgraph/mppc netgraph/one2many netgraph/ppp \ 59 netgraph/pppoe netgraph/pptpgre netgraph/rfc1490 netgraph/socket \ 60 netgraph/tee netgraph/tty netgraph/vjc \ 61 bus/cam bus/usb bus/pccard bus/pci bus/isa \ 62 netproto/atalk netproto/atm netproto/ipsec netproto/ipx \ 63 netproto/key netproto/natm netproto/ncp netproto/ns netproto/smb \ 64 netproto/atm/ipatm netproto/atm/sigpvc netproto/atm/spans \ 65 netproto/atm/uni netproto/802_11 netproto/mpls 66 67LSUBDIRS3= vfs/isofs/cd9660 net/i4b/include \ 68 dev/misc/lpt dev/netif/wi dev/video/bktr dev/video/meteor 69 70# For SHARED=symlinks, bus/cam and netproto/atm are symlinks, so cam/scsi 71# and netproto/atm/* are taken care of 72LSYMSUBDIRS= ${LSUBDIRS:Nbus/cam/scsi:Nnetproto/atm/*:Nnet/*:Nnetgraph/*} 73LSYMSUBDIRS3= ${LSUBDIRS3:Nnet/*} 74 75# For obsolete headers which need to be removed 76RMHEADERS= machine/ansi.h sys/inttypes.h 77 78# Define SHARED to indicate whether you want symbolic links to the system 79# source (``symlinks''), or a separate copy (``copies''). ``symlinks'' is 80# probably only useful for developers and should be avoided if you do not 81# wish to tie your /usr/include and /usr/src together. 82#SHARED= symlinks 83SHARED?= copies 84 85INCS+= osreldate.h 86 87osreldate.h: ${.CURDIR}/../sys/conf/newvers.sh \ 88 ${.CURDIR}/../sys/sys/param.h 89 @${ECHO} creating osreldate.h from newvers.sh 90 setvar PARAMFILE ${.CURDIR}/../sys/sys/param.h; \ 91 . ${.CURDIR}/../sys/conf/newvers.sh; \ 92 echo "$$COPYRIGHT" > osreldate.h; \ 93 echo "#ifdef _KERNEL" >> osreldate.h; \ 94 echo '#error "osreldate.h must not be used in the kernel, use sys/param.h"' >> osreldate.h; \ 95 echo "#else" >> osreldate.h; \ 96 echo "#undef __DragonFly_version" >> osreldate.h; \ 97 echo "#define __DragonFly_version $$RELDATE" >> osreldate.h; \ 98 echo "#ifdef __FreeBSD__" >> osreldate.h; \ 99 echo "#undef __FreeBSD_version" >> osreldate.h; \ 100 echo "#define __FreeBSD_version 480101" >> osreldate.h; \ 101 echo "#endif" >> osreldate.h; \ 102 echo "#endif" >> osreldate.h 103 104.for i in ${LHDRS} 105INCSLINKS+= sys/$i ${INCLUDEDIR}/$i 106.endfor 107.for i in ${MHDRS} 108INCSLINKS+= machine/$i ${INCLUDEDIR}/$i 109.endfor 110INCSLINKS+= bus/cam ${INCLUDEDIR}/cam 111INCSLINKS+= vfs/msdosfs ${INCLUDEDIR}/msdosfs 112INCSLINKS+= vfs/isofs ${INCLUDEDIR}/isofs 113INCSLINKS+= vfs/mfs ${INCLUDEDIR}/mfs 114INCSLINKS+= vfs/nfs ${INCLUDEDIR}/nfs 115INCSLINKS+= vfs/ntfs ${INCLUDEDIR}/ntfs 116INCSLINKS+= vfs/nwfs ${INCLUDEDIR}/nwfs 117INCSLINKS+= vfs ${INCLUDEDIR}/fs 118# this is for <ufs/ufs/...> and <ufs/ffs/...> paths used by ports 119# It is hopefully a temporary hack until we have environments working. 120INCSLINKS+= vfs ${INCLUDEDIR}/ufs 121INCSLINKS+= ufs ${INCLUDEDIR}/vfs/ffs 122INCSLINKS+= emulation ${INCLUDEDIR}/compat 123INCSLINKS+= netproto/atalk ${INCLUDEDIR}/netatalk 124INCSLINKS+= netproto/atm ${INCLUDEDIR}/netatm 125INCSLINKS+= netproto/ipsec ${INCLUDEDIR}/netipsec 126INCSLINKS+= netproto/ipx ${INCLUDEDIR}/netipx 127INCSLINKS+= netproto/key ${INCLUDEDIR}/netkey 128INCSLINKS+= netproto/natm ${INCLUDEDIR}/netnatm 129INCSLINKS+= netproto/ncp ${INCLUDEDIR}/netncp 130INCSLINKS+= netproto/ns ${INCLUDEDIR}/netns 131INCSLINKS+= netproto/smb ${INCLUDEDIR}/netsmb 132INCSLINKS+= bus/pccard ${INCLUDEDIR}/pccard 133 134# NOTE! 135# 136# machine/ header files come from the platform architecture and 137# cpu/ header files come from the cpu architecture. All code outside 138# of the machine header files ALWAYS #include's <machine/blah.h>. So 139# if the platform architecture is missing a header file we have to 140# copy it in from the cpu architecture. This way we do not have to 141# create dozens of pure forwarding headers for files that platform 142# architecture does not need to enhance. 143 144mtree_setup: 145.for i in ${LDIRS} ${LSYMSUBDIRS} ${LSYMSUBDIRS3} machine cpu crypto 146 if [ -h ${DESTDIR}/usr/include/$i ]; then \ 147 rm -f ${DESTDIR}/usr/include/$i; \ 148 fi 149.endfor 150 mtree -deU -f ${.CURDIR}/../etc/mtree/BSD.include.dist \ 151 -p ${DESTDIR}/usr/include 152 153copies: mtree_setup 154.for i in ${LDIRS} ${LSUBDIRS} ${LSUBDIRS3} 155 cd ${.CURDIR}/../sys; \ 156 ${INSTALL} -C -o ${BINOWN} -g ${BINGRP} -m 444 $i/*.h \ 157 ${DESTDIR}/usr/include/$i 158.endfor 159 cd ${.CURDIR}/../sys; \ 160 ${INSTALL} -C -o ${BINOWN} -g ${BINGRP} -m 444 opencrypto/*.h \ 161 ${DESTDIR}/usr/include/crypto 162.if exists(${.CURDIR}/../sys/cpu/${MACHINE_ARCH}/include) 163 cd ${.CURDIR}/../sys/cpu/${MACHINE_ARCH}/include; \ 164 ${INSTALL} -C -o ${BINOWN} -g ${BINGRP} -m 444 *.h \ 165 ${DESTDIR}/usr/include/cpu 166 # XXX this will cause quickworld to rebuild more junk 167 # then it needs to. 168 cpdup -o ${DESTDIR}/usr/include/cpu ${DESTDIR}/usr/include/machine 169.endif 170.if exists(${.CURDIR}/../sys/platform/${MACHINE_PLATFORM}/include) 171 cd ${.CURDIR}/../sys/platform/${MACHINE_PLATFORM}/include; \ 172 ${INSTALL} -C -o ${BINOWN} -g ${BINGRP} -m 444 *.h \ 173 ${DESTDIR}/usr/include/machine 174.if exists(${.CURDIR}/../sys/platform/${MACHINE_PLATFORM}/include/pc) 175 cd ${.CURDIR}/../sys/platform/${MACHINE_PLATFORM}/include/pc; \ 176 ${INSTALL} -C -o ${BINOWN} -g ${BINGRP} -m 444 *.h \ 177 ${DESTDIR}/usr/include/machine/pc 178.endif 179.endif 180.if exists(${.CURDIR}/../sys/net/i4b/include/${MACHINE_ARCH}) 181 cd ${.CURDIR}/../sys/net/i4b/include/${MACHINE_ARCH}; \ 182 ${INSTALL} -C -o ${BINOWN} -g ${BINGRP} -m 444 *.h \ 183 ${DESTDIR}/usr/include/i4b_machine 184.endif 185.for i in ${SHDRS} 186 ${LN} -sf ../sys/$i ${DESTDIR}/usr/include/machine/$i 187.endfor 188.for i in ${RMHEADERS} 189 rm -f ${DESTDIR}/usr/include/$i 190.endfor 191 192symlinks: mtree_setup 193 @${ECHO} "Setting up symlinks to kernel source tree..." 194.for i in ${LDIRS} 195 rm -rf ${DESTDIR}/usr/include/$i 196 ${LN} -s ../../sys/$i ${DESTDIR}/usr/include/$i 197.endfor 198 rm -rf ${DESTDIR}/usr/include/crypto 199 ${LN} -s ../../sys/opencrypto ${DESTDIR}/usr/include/crypto 200.for i in ${LSYMSUBDIRS} 201 rm -rf ${DESTDIR}/usr/include/$i 202 ${LN} -s ../../../sys/$i ${DESTDIR}/usr/include/$i 203.endfor 204.for i in ${LSYMSUBDIRS3} 205 rm -rf ${DESTDIR}/usr/include/$i 206 ${LN} -s ../../../../sys/$i ${DESTDIR}/usr/include/$i 207.endfor 208 rm -rf ${DESTDIR}/usr/include/cpu 209 ${LN} -s ../../sys/cpu/${MACHINE_ARCH}/include ${DESTDIR}/usr/include/cpu 210 rm -rf ${DESTDIR}/usr/include/machine 211 cpdup ${.CURDIR}/../sys/cpu/${MACHINE_ARCH}/include \ 212 ${DESTDIR}/usr/include/machine 213 cpdup -o ${.CURDIR}/../sys/platform/${MACHINE_PLATFORM}/include \ 214 ${DESTDIR}/usr/include/machine 215 rm -rf ${DESTDIR}/usr/include/i4b_machine 216 ${LN} -s ../../sys/net/i4b/include/${MACHINE_ARCH} ${DESTDIR}/usr/include/i4b_machine 217 218.include <bsd.prog.mk> 219 220installincludes: ${SHARED} 221