1.\" 2.\" Copyright (c) 1997 David E. O'Brien 3.\" 4.\" All rights reserved. 5.\" 6.\" Redistribution and use in source and binary forms, with or without 7.\" modification, are permitted provided that the following conditions 8.\" are met: 9.\" 1. Redistributions of source code must retain the above copyright 10.\" notice, this list of conditions and the following disclaimer. 11.\" 2. Redistributions in binary form must reproduce the above copyright 12.\" notice, this list of conditions and the following disclaimer in the 13.\" documentation and/or other materials provided with the distribution. 14.\" 15.\" THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY EXPRESS OR 16.\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 17.\" OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 18.\" IN NO EVENT SHALL THE DEVELOPERS BE LIABLE FOR ANY DIRECT, INDIRECT, 19.\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 20.\" NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 21.\" DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 22.\" THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 23.\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 24.\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 25.\" 26.\" $FreeBSD: src/share/man/man4/fxp.4,v 1.11.2.8 2003/02/17 21:20:39 trhodes Exp $ 27.\" $DragonFly: src/share/man/man4/fxp.4,v 1.2 2003/06/17 04:36:59 dillon Exp $ 28.\" 29.Dd January 19, 1997 30.Dt FXP 4 31.Os 32.Sh NAME 33.Nm fxp 34.Nd Intel EtherExpress Pro/100B ethernet device driver 35.Sh SYNOPSIS 36.Cd "device miibus" 37.Cd "device fxp" 38.Sh DESCRIPTION 39The 40.Nm 41driver provides support for the EtherExpress Pro/10, InBusiness 4210/100, Pro/100 B, Pro/100+, Pro/100 VE, Pro/100 M, and Pro/100 S 43PCI Fast Ethernet adapters based on the Intel i82557, i82558, i82559, 44i82550, or i82562 Ethernet chips. 45Many on-board network interfaces on Intel motherboards use these chips 46and are also supported. 47.Pp 48The 49.Nm 50driver supports the following media types: 51.Pp 52.Bl -tag -width xxxxxxxxxxxxxxxxxxxx 53.It autoselect 54Enable autoselection of the media type and options 55.It 10baseT/UTP 56Set 10Mbps operation 57.It 100baseTX 58Set 100Mbps (fast ethernet) operation 59.El 60.Pp 61The 62.Nm 63driver supports the following media options: 64.Pp 65.Bl -tag -width xxxxxxxxxxxxxxxxxxxx 66.It full-duplex 67Set full duplex operation 68.El 69.Pp 70Note that 100baseTX media type is not available on the Pro/10. 71For further information on configuring this device, see 72.Xr ifconfig 8 . 73.Pp 74The 75.Nm 76driver also supports a special link option: 77.Bl -tag -width link0 78.It Cm link0 79Some chip revisions have loadable microcode which can be used to reduce the 80interrupt load on the host cpu. 81Not all boards have support microcode support. 82Setting the 83.Cm link0 84flag with 85.Xr ifconfig 8 86will download the microcode to the chip if it is available. 87.El 88.Sh DIAGNOSTICS 89.Bl -diag 90.It "fxp%d: couldn't map memory" 91A fatal initialization error has occurred. 92.It "fxp%d: couldn't map interrupt" 93A fatal initialization error has occurred. 94.It "fxp%d: Failed to malloc memory" 95There are not enough mbuf's available for allocation. 96.It "fxp%d: device timeout" 97The device has stopped responding to the network, or there is a problem with 98the network connection (cable). 99.It "fxp%d: Microcode loaded, int_delay: %d usec bundle_max: %d" 100The chip has successfully downloaded the microcode, and changed the 101parameterized values to the given settings. 102.El 103.Sh SEE ALSO 104.Xr arp 4 , 105.Xr miibus 4 , 106.Xr netintro 4 , 107.Xr ng_ether 4 , 108.Xr ifconfig 8 109.Sh HISTORY 110The 111.Nm 112device driver first appeared in 113.Fx 2.1 . 114.Sh AUTHORS 115.An -nosplit 116The 117.Nm 118device driver was written by 119.An David Greenman . 120This manual page was written by 121.An David E. O'Brien . 122