1 /* 2 * Implementation of Utility functions for all SCSI device types. 3 * 4 * Copyright (c) 1997, 1998 Justin T. Gibbs. 5 * Copyright (c) 1997, 1998, 2003 Kenneth D. Merry. 6 * All rights reserved. 7 * 8 * Redistribution and use in source and binary forms, with or without 9 * modification, are permitted provided that the following conditions 10 * are met: 11 * 1. Redistributions of source code must retain the above copyright 12 * notice, this list of conditions, and the following disclaimer, 13 * without modification, immediately at the beginning of the file. 14 * 2. The name of the author may not be used to endorse or promote products 15 * derived from this software without specific prior written permission. 16 * 17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 20 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR 21 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 27 * SUCH DAMAGE. 28 * 29 * $FreeBSD: src/sys/cam/scsi/scsi_all.c,v 1.53 2008/08/16 21:26:58 ken Exp $ 30 * $DragonFly: src/sys/bus/cam/scsi/scsi_all.c,v 1.29 2008/11/16 18:43:59 swildner Exp $ 31 */ 32 33 #include <sys/param.h> 34 35 #ifdef _KERNEL 36 37 #include <opt_scsi.h> 38 #include <sys/systm.h> 39 #include <sys/libkern.h> 40 #include <sys/kernel.h> 41 #include <sys/sysctl.h> 42 43 #else 44 45 #include <errno.h> 46 #include <stdio.h> 47 #include <stdlib.h> 48 #include <string.h> 49 50 #define ksnprintf snprintf /* ick, userland uses us too */ 51 #define kprintf printf 52 #endif 53 54 #include "../cam.h" 55 #include "../cam_ccb.h" 56 #include "../cam_xpt.h" 57 #include "scsi_all.h" 58 #include <sys/sbuf.h> 59 #ifndef _KERNEL 60 #include <sys/camlib.h> 61 62 #ifndef FALSE 63 #define FALSE 0 64 #endif /* FALSE */ 65 #ifndef TRUE 66 #define TRUE 1 67 #endif /* TRUE */ 68 #define ERESTART -1 /* restart syscall */ 69 #define EJUSTRETURN -2 /* don't modify regs, just return */ 70 #endif /* !_KERNEL */ 71 72 /* 73 * This is the default number of milliseconds we wait for devices to settle 74 * after a SCSI bus reset. 75 */ 76 #ifndef SCSI_DELAY 77 #define SCSI_DELAY 2000 78 #endif 79 /* 80 * All devices need _some_ sort of bus settle delay, so we'll set it to 81 * a minimum value of 100ms. Note that this is pertinent only for SPI- 82 * not transport like Fibre Channel or iSCSI where 'delay' is completely 83 * meaningless. 84 */ 85 #ifndef SCSI_MIN_DELAY 86 #define SCSI_MIN_DELAY 100 87 #endif 88 /* 89 * Make sure the user isn't using seconds instead of milliseconds. 90 */ 91 #if (SCSI_DELAY < SCSI_MIN_DELAY && SCSI_DELAY != 0) 92 #error "SCSI_DELAY is in milliseconds, not seconds! Please use a larger value" 93 #endif 94 95 int scsi_delay; 96 97 static int ascentrycomp(const void *key, const void *member); 98 static int senseentrycomp(const void *key, const void *member); 99 static void fetchtableentries(int sense_key, int asc, int ascq, 100 struct scsi_inquiry_data *, 101 const struct sense_key_table_entry **, 102 const struct asc_table_entry **); 103 #ifdef _KERNEL 104 static void init_scsi_delay(void); 105 static int sysctl_scsi_delay(SYSCTL_HANDLER_ARGS); 106 static int set_scsi_delay(int delay); 107 #endif 108 109 #if !defined(SCSI_NO_OP_STRINGS) 110 111 #define D (1 << T_DIRECT) 112 #define T (1 << T_SEQUENTIAL) 113 #define L (1 << T_PRINTER) 114 #define P (1 << T_PROCESSOR) 115 #define W (1 << T_WORM) 116 #define R (1 << T_CDROM) 117 #define O (1 << T_OPTICAL) 118 #define M (1 << T_CHANGER) 119 #define A (1 << T_STORARRAY) 120 #define E (1 << T_ENCLOSURE) 121 #define B (1 << T_RBC) 122 #define K (1 << T_OCRW) 123 #define V (1 << T_ADC) 124 #define F (1 << T_OSD) 125 #define S (1 << T_SCANNER) 126 #define C (1 << T_COMM) 127 128 #define ALL (D | T | L | P | W | R | O | M | A | E | B | K | V | F | S | C) 129 130 static struct op_table_entry plextor_cd_ops[] = { 131 { 0xD8, R, "CD-DA READ" } 132 }; 133 134 static struct scsi_op_quirk_entry scsi_op_quirk_table[] = { 135 { 136 /* 137 * I believe that 0xD8 is the Plextor proprietary command 138 * to read CD-DA data. I'm not sure which Plextor CDROM 139 * models support the command, though. I know for sure 140 * that the 4X, 8X, and 12X models do, and presumably the 141 * 12-20X does. I don't know about any earlier models, 142 * though. If anyone has any more complete information, 143 * feel free to change this quirk entry. 144 */ 145 {T_CDROM, SIP_MEDIA_REMOVABLE, "PLEXTOR", "CD-ROM PX*", "*"}, 146 sizeof(plextor_cd_ops)/sizeof(struct op_table_entry), 147 plextor_cd_ops 148 } 149 }; 150 151 static struct op_table_entry scsi_op_codes[] = { 152 /* 153 * From: http://www.t10.org/lists/op-num.txt 154 * Modifications by Kenneth Merry (ken@FreeBSD.ORG) 155 * and Jung-uk Kim (jkim@FreeBSD.org) 156 * 157 * Note: order is important in this table, scsi_op_desc() currently 158 * depends on the opcodes in the table being in order to save 159 * search time. 160 * Note: scanner and comm. devices are carried over from the previous 161 * version because they were removed in the latest spec. 162 */ 163 /* File: OP-NUM.TXT 164 * 165 * SCSI Operation Codes 166 * Numeric Sorted Listing 167 * as of 3/11/08 168 * 169 * D - DIRECT ACCESS DEVICE (SBC-2) device column key 170 * .T - SEQUENTIAL ACCESS DEVICE (SSC-2) ----------------- 171 * . L - PRINTER DEVICE (SSC) M = Mandatory 172 * . P - PROCESSOR DEVICE (SPC) O = Optional 173 * . .W - WRITE ONCE READ MULTIPLE DEVICE (SBC-2) V = Vendor spec. 174 * . . R - CD/DVE DEVICE (MMC-3) Z = Obsolete 175 * . . O - OPTICAL MEMORY DEVICE (SBC-2) 176 * . . .M - MEDIA CHANGER DEVICE (SMC-2) 177 * . . . A - STORAGE ARRAY DEVICE (SCC-2) 178 * . . . .E - ENCLOSURE SERVICES DEVICE (SES) 179 * . . . .B - SIMPLIFIED DIRECT-ACCESS DEVICE (RBC) 180 * . . . . K - OPTICAL CARD READER/WRITER DEVICE (OCRW) 181 * . . . . V - AUTOMATION/DRIVE INTERFACE (ADC) 182 * . . . . .F - OBJECT-BASED STORAGE (OSD) 183 * OP DTLPWROMAEBKVF Description 184 * -- -------------- ---------------------------------------------- */ 185 /* 00 MMMMMMMMMMMMMM TEST UNIT READY */ 186 { 0x00, ALL, "TEST UNIT READY" }, 187 /* 01 M REWIND */ 188 { 0x01, T, "REWIND" }, 189 /* 01 Z V ZZZZ REZERO UNIT */ 190 { 0x01, D | W | R | O | M, "REZERO UNIT" }, 191 /* 02 VVVVVV V */ 192 /* 03 MMMMMMMMMMOMMM REQUEST SENSE */ 193 { 0x03, ALL, "REQUEST SENSE" }, 194 /* 04 M OO FORMAT UNIT */ 195 { 0x04, D | R | O, "FORMAT UNIT" }, 196 /* 04 O FORMAT MEDIUM */ 197 { 0x04, T, "FORMAT MEDIUM" }, 198 /* 04 O FORMAT */ 199 { 0x04, L, "FORMAT" }, 200 /* 05 VMVVVV V READ BLOCK LIMITS */ 201 { 0x05, T, "READ BLOCK LIMITS" }, 202 /* 06 VVVVVV V */ 203 /* 07 OVV O OV REASSIGN BLOCKS */ 204 { 0x07, D | W | O, "REASSIGN BLOCKS" }, 205 /* 07 O INITIALIZE ELEMENT STATUS */ 206 { 0x07, M, "INITIALIZE ELEMENT STATUS" }, 207 /* 08 MOV O OV READ(6) */ 208 { 0x08, D | T | W | O, "READ(6)" }, 209 /* 08 O RECEIVE */ 210 { 0x08, P, "RECEIVE" }, 211 /* 08 GET MESSAGE(6) */ 212 { 0x08, C, "GET MESSAGE(6)" }, 213 /* 09 VVVVVV V */ 214 /* 0A OO O OV WRITE(6) */ 215 { 0x0A, D | T | W | O, "WRITE(6)" }, 216 /* 0A M SEND(6) */ 217 { 0x0A, P, "SEND(6)" }, 218 /* 0A SEND MESSAGE(6) */ 219 { 0x0A, C, "SEND MESSAGE(6)" }, 220 /* 0A M PRINT */ 221 { 0x0A, L, "PRINT" }, 222 /* 0B Z ZOZV SEEK(6) */ 223 { 0x0B, D | W | R | O, "SEEK(6)" }, 224 /* 0B O SET CAPACITY */ 225 { 0x0B, T, "SET CAPACITY" }, 226 /* 0B O SLEW AND PRINT */ 227 { 0x0B, L, "SLEW AND PRINT" }, 228 /* 0C VVVVVV V */ 229 /* 0D VVVVVV V */ 230 /* 0E VVVVVV V */ 231 /* 0F VOVVVV V READ REVERSE(6) */ 232 { 0x0F, T, "READ REVERSE(6)" }, 233 /* 10 VM VVV WRITE FILEMARKS(6) */ 234 { 0x10, T, "WRITE FILEMARKS(6)" }, 235 /* 10 O SYNCHRONIZE BUFFER */ 236 { 0x10, L, "SYNCHRONIZE BUFFER" }, 237 /* 11 VMVVVV SPACE(6) */ 238 { 0x11, T, "SPACE(6)" }, 239 /* 12 MMMMMMMMMMMMMM INQUIRY */ 240 { 0x12, ALL, "INQUIRY" }, 241 /* 13 V VVVV */ 242 /* 13 O VERIFY(6) */ 243 { 0x13, T, "VERIFY(6)" }, 244 /* 14 VOOVVV RECOVER BUFFERED DATA */ 245 { 0x14, T | L, "RECOVER BUFFERED DATA" }, 246 /* 15 OMO O OOOO OO MODE SELECT(6) */ 247 { 0x15, ALL & ~(P | R | B | F), "MODE SELECT(6)" }, 248 /* 16 ZZMZO OOOZ O RESERVE(6) */ 249 { 0x16, ALL & ~(R | B | V | F | C), "RESERVE(6)" }, 250 /* 16 Z RESERVE ELEMENT(6) */ 251 { 0x16, M, "RESERVE ELEMENT(6)" }, 252 /* 17 ZZMZO OOOZ O RELEASE(6) */ 253 { 0x17, ALL & ~(R | B | V | F | C), "RELEASE(6)" }, 254 /* 17 Z RELEASE ELEMENT(6) */ 255 { 0x17, M, "RELEASE ELEMENT(6)" }, 256 /* 18 ZZZZOZO Z COPY */ 257 { 0x18, D | T | L | P | W | R | O | K | S, "COPY" }, 258 /* 19 VMVVVV ERASE(6) */ 259 { 0x19, T, "ERASE(6)" }, 260 /* 1A OMO O OOOO OO MODE SENSE(6) */ 261 { 0x1A, ALL & ~(P | R | B | F), "MODE SENSE(6)" }, 262 /* 1B O OOO O MO O START STOP UNIT */ 263 { 0x1B, D | W | R | O | A | B | K | F, "START STOP UNIT" }, 264 /* 1B O M LOAD UNLOAD */ 265 { 0x1B, T | V, "LOAD UNLOAD" }, 266 /* 1B SCAN */ 267 { 0x1B, S, "SCAN" }, 268 /* 1B O STOP PRINT */ 269 { 0x1B, L, "STOP PRINT" }, 270 /* 1B O OPEN/CLOSE IMPORT/EXPORT ELEMENT */ 271 { 0x1B, M, "OPEN/CLOSE IMPORT/EXPORT ELEMENT" }, 272 /* 1C OOOOO OOOM OOO RECEIVE DIAGNOSTIC RESULTS */ 273 { 0x1C, ALL & ~(R | B), "RECEIVE DIAGNOSTIC RESULTS" }, 274 /* 1D MMMMM MMOM MMM SEND DIAGNOSTIC */ 275 { 0x1D, ALL & ~(R | B), "SEND DIAGNOSTIC" }, 276 /* 1E OO OOOO O O PREVENT ALLOW MEDIUM REMOVAL */ 277 { 0x1E, D | T | W | R | O | M | K | F, "PREVENT ALLOW MEDIUM REMOVAL" }, 278 /* 1F */ 279 /* 20 V VVV V */ 280 /* 21 V VVV V */ 281 /* 22 V VVV V */ 282 /* 23 V V V V */ 283 /* 23 O READ FORMAT CAPACITIES */ 284 { 0x23, R, "READ FORMAT CAPACITIES" }, 285 /* 24 V VV SET WINDOW */ 286 { 0x24, S, "SET WINDOW" }, 287 /* 25 M M M M READ CAPACITY(10) */ 288 { 0x25, D | W | O | B, "READ CAPACITY(10)" }, 289 /* 25 O READ CAPACITY */ 290 { 0x25, R, "READ CAPACITY" }, 291 /* 25 M READ CARD CAPACITY */ 292 { 0x25, K, "READ CARD CAPACITY" }, 293 /* 25 GET WINDOW */ 294 { 0x25, S, "GET WINDOW" }, 295 /* 26 V VV */ 296 /* 27 V VV */ 297 /* 28 M MOM MM READ(10) */ 298 { 0x28, D | W | R | O | B | K | S, "READ(10)" }, 299 /* 28 GET MESSAGE(10) */ 300 { 0x28, C, "GET MESSAGE(10)" }, 301 /* 29 V VVO READ GENERATION */ 302 { 0x29, O, "READ GENERATION" }, 303 /* 2A O MOM MO WRITE(10) */ 304 { 0x2A, D | W | R | O | B | K, "WRITE(10)" }, 305 /* 2A SEND(10) */ 306 { 0x2A, S, "SEND(10)" }, 307 /* 2A SEND MESSAGE(10) */ 308 { 0x2A, C, "SEND MESSAGE(10)" }, 309 /* 2B Z OOO O SEEK(10) */ 310 { 0x2B, D | W | R | O | K, "SEEK(10)" }, 311 /* 2B O LOCATE(10) */ 312 { 0x2B, T, "LOCATE(10)" }, 313 /* 2B O POSITION TO ELEMENT */ 314 { 0x2B, M, "POSITION TO ELEMENT" }, 315 /* 2C V OO ERASE(10) */ 316 { 0x2C, R | O, "ERASE(10)" }, 317 /* 2D O READ UPDATED BLOCK */ 318 { 0x2D, O, "READ UPDATED BLOCK" }, 319 /* 2D V */ 320 /* 2E O OOO MO WRITE AND VERIFY(10) */ 321 { 0x2E, D | W | R | O | B | K, "WRITE AND VERIFY(10)" }, 322 /* 2F O OOO VERIFY(10) */ 323 { 0x2F, D | W | R | O, "VERIFY(10)" }, 324 /* 30 Z ZZZ SEARCH DATA HIGH(10) */ 325 { 0x30, D | W | R | O, "SEARCH DATA HIGH(10)" }, 326 /* 31 Z ZZZ SEARCH DATA EQUAL(10) */ 327 { 0x31, D | W | R | O, "SEARCH DATA EQUAL(10)" }, 328 /* 31 OBJECT POSITION */ 329 { 0x31, S, "OBJECT POSITION" }, 330 /* 32 Z ZZZ SEARCH DATA LOW(10) */ 331 { 0x32, D | W | R | O, "SEARCH DATA LOW(10)" }, 332 /* 33 Z OZO SET LIMITS(10) */ 333 { 0x33, D | W | R | O, "SET LIMITS(10)" }, 334 /* 34 O O O O PRE-FETCH(10) */ 335 { 0x34, D | W | O | K, "PRE-FETCH(10)" }, 336 /* 34 M READ POSITION */ 337 { 0x34, T, "READ POSITION" }, 338 /* 34 GET DATA BUFFER STATUS */ 339 { 0x34, S, "GET DATA BUFFER STATUS" }, 340 /* 35 O OOO MO SYNCHRONIZE CACHE(10) */ 341 { 0x35, D | W | R | O | B | K, "SYNCHRONIZE CACHE(10)" }, 342 /* 36 Z O O O LOCK UNLOCK CACHE(10) */ 343 { 0x36, D | W | O | K, "LOCK UNLOCK CACHE(10)" }, 344 /* 37 O O READ DEFECT DATA(10) */ 345 { 0x37, D | O, "READ DEFECT DATA(10)" }, 346 /* 37 O INITIALIZE ELEMENT STATUS WITH RANGE */ 347 { 0x37, M, "INITIALIZE ELEMENT STATUS WITH RANGE" }, 348 /* 38 O O O MEDIUM SCAN */ 349 { 0x38, W | O | K, "MEDIUM SCAN" }, 350 /* 39 ZZZZOZO Z COMPARE */ 351 { 0x39, D | T | L | P | W | R | O | K | S, "COMPARE" }, 352 /* 3A ZZZZOZO Z COPY AND VERIFY */ 353 { 0x3A, D | T | L | P | W | R | O | K | S, "COPY AND VERIFY" }, 354 /* 3B OOOOOOOOOOMOOO WRITE BUFFER */ 355 { 0x3B, ALL, "WRITE BUFFER" }, 356 /* 3C OOOOOOOOOO OOO READ BUFFER */ 357 { 0x3C, ALL & ~(B), "READ BUFFER" }, 358 /* 3D O UPDATE BLOCK */ 359 { 0x3D, O, "UPDATE BLOCK" }, 360 /* 3E O O O READ LONG(10) */ 361 { 0x3E, D | W | O, "READ LONG(10)" }, 362 /* 3F O O O WRITE LONG(10) */ 363 { 0x3F, D | W | O, "WRITE LONG(10)" }, 364 /* 40 ZZZZOZOZ CHANGE DEFINITION */ 365 { 0x40, D | T | L | P | W | R | O | M | S | C, "CHANGE DEFINITION" }, 366 /* 41 O WRITE SAME(10) */ 367 { 0x41, D, "WRITE SAME(10)" }, 368 /* 42 O READ SUB-CHANNEL */ 369 { 0x42, R, "READ SUB-CHANNEL" }, 370 /* 43 O READ TOC/PMA/ATIP */ 371 { 0x43, R, "READ TOC/PMA/ATIP" }, 372 /* 44 M M REPORT DENSITY SUPPORT */ 373 { 0x44, T | V, "REPORT DENSITY SUPPORT" }, 374 /* 44 READ HEADER */ 375 /* 45 O PLAY AUDIO(10) */ 376 { 0x45, R, "PLAY AUDIO(10)" }, 377 /* 46 M GET CONFIGURATION */ 378 { 0x46, R, "GET CONFIGURATION" }, 379 /* 47 O PLAY AUDIO MSF */ 380 { 0x47, R, "PLAY AUDIO MSF" }, 381 /* 48 */ 382 /* 49 */ 383 /* 4A M GET EVENT STATUS NOTIFICATION */ 384 { 0x4A, R, "GET EVENT STATUS NOTIFICATION" }, 385 /* 4B O PAUSE/RESUME */ 386 { 0x4B, R, "PAUSE/RESUME" }, 387 /* 4C OOOOO OOOO OOO LOG SELECT */ 388 { 0x4C, ALL & ~(R | B), "LOG SELECT" }, 389 /* 4D OOOOO OOOO OMO LOG SENSE */ 390 { 0x4D, ALL & ~(R | B), "LOG SENSE" }, 391 /* 4E O STOP PLAY/SCAN */ 392 { 0x4E, R, "STOP PLAY/SCAN" }, 393 /* 4F */ 394 /* 50 O XDWRITE(10) */ 395 { 0x50, D, "XDWRITE(10)" }, 396 /* 51 O XPWRITE(10) */ 397 { 0x51, D, "XPWRITE(10)" }, 398 /* 51 O READ DISC INFORMATION */ 399 { 0x51, R, "READ DISC INFORMATION" }, 400 /* 52 O XDREAD(10) */ 401 { 0x52, D, "XDREAD(10)" }, 402 /* 52 O READ TRACK INFORMATION */ 403 { 0x52, R, "READ TRACK INFORMATION" }, 404 /* 53 O RESERVE TRACK */ 405 { 0x53, R, "RESERVE TRACK" }, 406 /* 54 O SEND OPC INFORMATION */ 407 { 0x54, R, "SEND OPC INFORMATION" }, 408 /* 55 OOO OMOOOOMOMO MODE SELECT(10) */ 409 { 0x55, ALL & ~(P), "MODE SELECT(10)" }, 410 /* 56 ZZMZO OOOZ RESERVE(10) */ 411 { 0x56, ALL & ~(R | B | K | V | F | C), "RESERVE(10)" }, 412 /* 56 Z RESERVE ELEMENT(10) */ 413 { 0x56, M, "RESERVE ELEMENT(10)" }, 414 /* 57 ZZMZO OOOZ RELEASE(10) */ 415 { 0x57, ALL & ~(R | B | K | V | F | C), "RELEASE(10)" }, 416 /* 57 Z RELEASE ELEMENT(10) */ 417 { 0x57, M, "RELEASE ELEMENT(10)" }, 418 /* 58 O REPAIR TRACK */ 419 { 0x58, R, "REPAIR TRACK" }, 420 /* 59 */ 421 /* 5A OOO OMOOOOMOMO MODE SENSE(10) */ 422 { 0x5A, ALL & ~(P), "MODE SENSE(10)" }, 423 /* 5B O CLOSE TRACK/SESSION */ 424 { 0x5B, R, "CLOSE TRACK/SESSION" }, 425 /* 5C O READ BUFFER CAPACITY */ 426 { 0x5C, R, "READ BUFFER CAPACITY" }, 427 /* 5D O SEND CUE SHEET */ 428 { 0x5D, R, "SEND CUE SHEET" }, 429 /* 5E OOOOO OOOO M PERSISTENT RESERVE IN */ 430 { 0x5E, ALL & ~(R | B | K | V | C), "PERSISTENT RESERVE IN" }, 431 /* 5F OOOOO OOOO M PERSISTENT RESERVE OUT */ 432 { 0x5F, ALL & ~(R | B | K | V | C), "PERSISTENT RESERVE OUT" }, 433 /* 7E OO O OOOO O extended CDB */ 434 { 0x7E, D | T | R | M | A | E | B | V, "extended CDB" }, 435 /* 7F O M variable length CDB (more than 16 bytes) */ 436 { 0x7F, D | F, "variable length CDB (more than 16 bytes)" }, 437 /* 80 Z XDWRITE EXTENDED(16) */ 438 { 0x80, D, "XDWRITE EXTENDED(16)" }, 439 /* 80 M WRITE FILEMARKS(16) */ 440 { 0x80, T, "WRITE FILEMARKS(16)" }, 441 /* 81 Z REBUILD(16) */ 442 { 0x81, D, "REBUILD(16)" }, 443 /* 81 O READ REVERSE(16) */ 444 { 0x81, T, "READ REVERSE(16)" }, 445 /* 82 Z REGENERATE(16) */ 446 { 0x82, D, "REGENERATE(16)" }, 447 /* 83 OOOOO O OO EXTENDED COPY */ 448 { 0x83, D | T | L | P | W | O | K | V, "EXTENDED COPY" }, 449 /* 84 OOOOO O OO RECEIVE COPY RESULTS */ 450 { 0x84, D | T | L | P | W | O | K | V, "RECEIVE COPY RESULTS" }, 451 /* 85 O O O ATA COMMAND PASS THROUGH(16) */ 452 { 0x85, D | R | B, "ATA COMMAND PASS THROUGH(16)" }, 453 /* 86 OO OO OOOOOOO ACCESS CONTROL IN */ 454 { 0x86, ALL & ~(L | R | F), "ACCESS CONTROL IN" }, 455 /* 87 OO OO OOOOOOO ACCESS CONTROL OUT */ 456 { 0x87, ALL & ~(L | R | F), "ACCESS CONTROL OUT" }, 457 /* 458 * XXX READ(16)/WRITE(16) were not listed for CD/DVE in op-num.txt 459 * but we had it since r1.40. Do we really want them? 460 */ 461 /* 88 MM O O O READ(16) */ 462 { 0x88, D | T | W | O | B, "READ(16)" }, 463 /* 89 */ 464 /* 8A OM O O O WRITE(16) */ 465 { 0x8A, D | T | W | O | B, "WRITE(16)" }, 466 /* 8B O ORWRITE */ 467 { 0x8B, D, "ORWRITE" }, 468 /* 8C OO O OO O M READ ATTRIBUTE */ 469 { 0x8C, D | T | W | O | M | B | V, "READ ATTRIBUTE" }, 470 /* 8D OO O OO O O WRITE ATTRIBUTE */ 471 { 0x8D, D | T | W | O | M | B | V, "WRITE ATTRIBUTE" }, 472 /* 8E O O O O WRITE AND VERIFY(16) */ 473 { 0x8E, D | W | O | B, "WRITE AND VERIFY(16)" }, 474 /* 8F OO O O O VERIFY(16) */ 475 { 0x8F, D | T | W | O | B, "VERIFY(16)" }, 476 /* 90 O O O O PRE-FETCH(16) */ 477 { 0x90, D | W | O | B, "PRE-FETCH(16)" }, 478 /* 91 O O O O SYNCHRONIZE CACHE(16) */ 479 { 0x91, D | W | O | B, "SYNCHRONIZE CACHE(16)" }, 480 /* 91 O SPACE(16) */ 481 { 0x91, T, "SPACE(16)" }, 482 /* 92 Z O O LOCK UNLOCK CACHE(16) */ 483 { 0x92, D | W | O, "LOCK UNLOCK CACHE(16)" }, 484 /* 92 O LOCATE(16) */ 485 { 0x92, T, "LOCATE(16)" }, 486 /* 93 O WRITE SAME(16) */ 487 { 0x93, D, "WRITE SAME(16)" }, 488 /* 93 M ERASE(16) */ 489 { 0x93, T, "ERASE(16)" }, 490 /* 94 [usage proposed by SCSI Socket Services project] */ 491 /* 95 [usage proposed by SCSI Socket Services project] */ 492 /* 96 [usage proposed by SCSI Socket Services project] */ 493 /* 97 [usage proposed by SCSI Socket Services project] */ 494 /* 98 */ 495 /* 99 */ 496 /* 9A */ 497 /* 9B */ 498 /* 9C */ 499 /* 9D */ 500 /* XXX KDM ALL for this? op-num.txt defines it for none.. */ 501 /* 9E SERVICE ACTION IN(16) */ 502 { 0x9E, ALL, "SERVICE ACTION IN(16)" }, 503 /* XXX KDM ALL for this? op-num.txt defines it for ADC.. */ 504 /* 9F M SERVICE ACTION OUT(16) */ 505 { 0x9F, ALL, "SERVICE ACTION OUT(16)" }, 506 /* A0 MMOOO OMMM OMO REPORT LUNS */ 507 { 0xA0, ALL & ~(R | B), "REPORT LUNS" }, 508 /* A1 O BLANK */ 509 { 0xA1, R, "BLANK" }, 510 /* A1 O O ATA COMMAND PASS THROUGH(12) */ 511 { 0xA1, D | B, "ATA COMMAND PASS THROUGH(12)" }, 512 /* A2 OO O O SECURITY PROTOCOL IN */ 513 { 0xA2, D | T | R | V, "SECURITY PROTOCOL IN" }, 514 /* A3 OOO O OOMOOOM MAINTENANCE (IN) */ 515 { 0xA3, ALL & ~(P | R | F), "MAINTENANCE (IN)" }, 516 /* A3 O SEND KEY */ 517 { 0xA3, R, "SEND KEY" }, 518 /* A4 OOO O OOOOOOO MAINTENANCE (OUT) */ 519 { 0xA4, ALL & ~(P | R | F), "MAINTENANCE (OUT)" }, 520 /* A4 O REPORT KEY */ 521 { 0xA4, R, "REPORT KEY" }, 522 /* A5 O O OM MOVE MEDIUM */ 523 { 0xA5, T | W | O | M, "MOVE MEDIUM" }, 524 /* A5 O PLAY AUDIO(12) */ 525 { 0xA5, R, "PLAY AUDIO(12)" }, 526 /* A6 O EXCHANGE MEDIUM */ 527 { 0xA6, M, "EXCHANGE MEDIUM" }, 528 /* A6 O LOAD/UNLOAD C/DVD */ 529 { 0xA6, R, "LOAD/UNLOAD C/DVD" }, 530 /* A7 ZZ O O MOVE MEDIUM ATTACHED */ 531 { 0xA7, D | T | W | O, "MOVE MEDIUM ATTACHED" }, 532 /* A7 O SET READ AHEAD */ 533 { 0xA7, R, "SET READ AHEAD" }, 534 /* A8 O OOO READ(12) */ 535 { 0xA8, D | W | R | O, "READ(12)" }, 536 /* A8 GET MESSAGE(12) */ 537 { 0xA8, C, "GET MESSAGE(12)" }, 538 /* A9 O SERVICE ACTION OUT(12) */ 539 { 0xA9, V, "SERVICE ACTION OUT(12)" }, 540 /* AA O OOO WRITE(12) */ 541 { 0xAA, D | W | R | O, "WRITE(12)" }, 542 /* AA SEND MESSAGE(12) */ 543 { 0xAA, C, "SEND MESSAGE(12)" }, 544 /* AB O O SERVICE ACTION IN(12) */ 545 { 0xAB, R | V, "SERVICE ACTION IN(12)" }, 546 /* AC O ERASE(12) */ 547 { 0xAC, O, "ERASE(12)" }, 548 /* AC O GET PERFORMANCE */ 549 { 0xAC, R, "GET PERFORMANCE" }, 550 /* AD O READ DVD STRUCTURE */ 551 { 0xAD, R, "READ DVD STRUCTURE" }, 552 /* AE O O O WRITE AND VERIFY(12) */ 553 { 0xAE, D | W | O, "WRITE AND VERIFY(12)" }, 554 /* AF O OZO VERIFY(12) */ 555 { 0xAF, D | W | R | O, "VERIFY(12)" }, 556 /* B0 ZZZ SEARCH DATA HIGH(12) */ 557 { 0xB0, W | R | O, "SEARCH DATA HIGH(12)" }, 558 /* B1 ZZZ SEARCH DATA EQUAL(12) */ 559 { 0xB1, W | R | O, "SEARCH DATA EQUAL(12)" }, 560 /* B2 ZZZ SEARCH DATA LOW(12) */ 561 { 0xB2, W | R | O, "SEARCH DATA LOW(12)" }, 562 /* B3 Z OZO SET LIMITS(12) */ 563 { 0xB3, D | W | R | O, "SET LIMITS(12)" }, 564 /* B4 ZZ OZO READ ELEMENT STATUS ATTACHED */ 565 { 0xB4, D | T | W | R | O, "READ ELEMENT STATUS ATTACHED" }, 566 /* B5 OO O O SECURITY PROTOCOL OUT */ 567 { 0xB5, D | T | R | V, "SECURITY PROTOCOL OUT" }, 568 /* B5 O REQUEST VOLUME ELEMENT ADDRESS */ 569 { 0xB5, M, "REQUEST VOLUME ELEMENT ADDRESS" }, 570 /* B6 O SEND VOLUME TAG */ 571 { 0xB6, M, "SEND VOLUME TAG" }, 572 /* B6 O SET STREAMING */ 573 { 0xB6, R, "SET STREAMING" }, 574 /* B7 O O READ DEFECT DATA(12) */ 575 { 0xB7, D | O, "READ DEFECT DATA(12)" }, 576 /* B8 O OZOM READ ELEMENT STATUS */ 577 { 0xB8, T | W | R | O | M, "READ ELEMENT STATUS" }, 578 /* B9 O READ CD MSF */ 579 { 0xB9, R, "READ CD MSF" }, 580 /* BA O O OOMO REDUNDANCY GROUP (IN) */ 581 { 0xBA, D | W | O | M | A | E, "REDUNDANCY GROUP (IN)" }, 582 /* BA O SCAN */ 583 { 0xBA, R, "SCAN" }, 584 /* BB O O OOOO REDUNDANCY GROUP (OUT) */ 585 { 0xBB, D | W | O | M | A | E, "REDUNDANCY GROUP (OUT)" }, 586 /* BB O SET CD SPEED */ 587 { 0xBB, R, "SET CD SPEED" }, 588 /* BC O O OOMO SPARE (IN) */ 589 { 0xBC, D | W | O | M | A | E, "SPARE (IN)" }, 590 /* BD O O OOOO SPARE (OUT) */ 591 { 0xBD, D | W | O | M | A | E, "SPARE (OUT)" }, 592 /* BD O MECHANISM STATUS */ 593 { 0xBD, R, "MECHANISM STATUS" }, 594 /* BE O O OOMO VOLUME SET (IN) */ 595 { 0xBE, D | W | O | M | A | E, "VOLUME SET (IN)" }, 596 /* BE O READ CD */ 597 { 0xBE, R, "READ CD" }, 598 /* BF O O OOOO VOLUME SET (OUT) */ 599 { 0xBF, D | W | O | M | A | E, "VOLUME SET (OUT)" }, 600 /* BF O SEND DVD STRUCTURE */ 601 { 0xBF, R, "SEND DVD STRUCTURE" } 602 }; 603 604 const char * 605 scsi_op_desc(u_int16_t opcode, struct scsi_inquiry_data *inq_data) 606 { 607 caddr_t match; 608 int i, j; 609 u_int32_t opmask; 610 u_int16_t pd_type; 611 int num_ops[2]; 612 struct op_table_entry *table[2]; 613 int num_tables; 614 615 pd_type = SID_TYPE(inq_data); 616 617 match = cam_quirkmatch((caddr_t)inq_data, 618 (caddr_t)scsi_op_quirk_table, 619 sizeof(scsi_op_quirk_table)/ 620 sizeof(*scsi_op_quirk_table), 621 sizeof(*scsi_op_quirk_table), 622 scsi_inquiry_match); 623 624 if (match != NULL) { 625 table[0] = ((struct scsi_op_quirk_entry *)match)->op_table; 626 num_ops[0] = ((struct scsi_op_quirk_entry *)match)->num_ops; 627 table[1] = scsi_op_codes; 628 num_ops[1] = sizeof(scsi_op_codes)/sizeof(scsi_op_codes[0]); 629 num_tables = 2; 630 } else { 631 /* 632 * If this is true, we have a vendor specific opcode that 633 * wasn't covered in the quirk table. 634 */ 635 if ((opcode > 0xBF) || ((opcode > 0x5F) && (opcode < 0x80))) 636 return("Vendor Specific Command"); 637 638 table[0] = scsi_op_codes; 639 num_ops[0] = sizeof(scsi_op_codes)/sizeof(scsi_op_codes[0]); 640 num_tables = 1; 641 } 642 643 /* RBC is 'Simplified' Direct Access Device */ 644 if (pd_type == T_RBC) 645 pd_type = T_DIRECT; 646 647 opmask = 1 << pd_type; 648 649 for (j = 0; j < num_tables; j++) { 650 for (i = 0;i < num_ops[j] && table[j][i].opcode <= opcode; i++){ 651 if ((table[j][i].opcode == opcode) 652 && ((table[j][i].opmask & opmask) != 0)) 653 return(table[j][i].desc); 654 } 655 } 656 657 /* 658 * If we can't find a match for the command in the table, we just 659 * assume it's a vendor specifc command. 660 */ 661 return("Vendor Specific Command"); 662 663 } 664 665 #else /* SCSI_NO_OP_STRINGS */ 666 667 const char * 668 scsi_op_desc(u_int16_t opcode, struct scsi_inquiry_data *inq_data) 669 { 670 return(""); 671 } 672 673 #endif 674 675 676 #if !defined(SCSI_NO_SENSE_STRINGS) 677 #define SST(asc, ascq, action, desc) \ 678 asc, ascq, action, desc 679 #else 680 const char empty_string[] = ""; 681 682 #define SST(asc, ascq, action, desc) \ 683 asc, ascq, action, empty_string 684 #endif 685 686 const struct sense_key_table_entry sense_key_table[] = 687 { 688 { SSD_KEY_NO_SENSE, SS_NOP, "NO SENSE" }, 689 { SSD_KEY_RECOVERED_ERROR, SS_NOP|SSQ_PRINT_SENSE, "RECOVERED ERROR" }, 690 { 691 SSD_KEY_NOT_READY, SS_TUR|SSQ_MANY|SSQ_DECREMENT_COUNT|EBUSY, 692 "NOT READY" 693 }, 694 { SSD_KEY_MEDIUM_ERROR, SS_RDEF, "MEDIUM ERROR" }, 695 { SSD_KEY_HARDWARE_ERROR, SS_RDEF, "HARDWARE FAILURE" }, 696 { SSD_KEY_ILLEGAL_REQUEST, SS_FATAL|EINVAL, "ILLEGAL REQUEST" }, 697 { SSD_KEY_UNIT_ATTENTION, SS_FATAL|ENXIO, "UNIT ATTENTION" }, 698 { SSD_KEY_DATA_PROTECT, SS_FATAL|EACCES, "DATA PROTECT" }, 699 { SSD_KEY_BLANK_CHECK, SS_FATAL|ENOSPC, "BLANK CHECK" }, 700 { SSD_KEY_Vendor_Specific, SS_FATAL|EIO, "Vendor Specific" }, 701 { SSD_KEY_COPY_ABORTED, SS_FATAL|EIO, "COPY ABORTED" }, 702 { SSD_KEY_ABORTED_COMMAND, SS_RDEF, "ABORTED COMMAND" }, 703 { SSD_KEY_EQUAL, SS_NOP, "EQUAL" }, 704 { SSD_KEY_VOLUME_OVERFLOW, SS_FATAL|EIO, "VOLUME OVERFLOW" }, 705 { SSD_KEY_MISCOMPARE, SS_NOP, "MISCOMPARE" }, 706 { SSD_KEY_RESERVED, SS_FATAL|EIO, "RESERVED" } 707 }; 708 709 const int sense_key_table_size = 710 sizeof(sense_key_table)/sizeof(sense_key_table[0]); 711 712 static struct asc_table_entry quantum_fireball_entries[] = { 713 { SST(0x04, 0x0b, SS_START | SSQ_DECREMENT_COUNT | ENXIO, 714 "Logical unit not ready, initializing cmd. required") } 715 }; 716 717 static struct asc_table_entry sony_mo_entries[] = { 718 { SST(0x04, 0x00, SS_START | SSQ_DECREMENT_COUNT | ENXIO, 719 "Logical unit not ready, cause not reportable") } 720 }; 721 722 static struct scsi_sense_quirk_entry sense_quirk_table[] = { 723 { 724 /* 725 * XXX The Quantum Fireball ST and SE like to return 0x04 0x0b 726 * when they really should return 0x04 0x02. 727 */ 728 {T_DIRECT, SIP_MEDIA_FIXED, "QUANTUM", "FIREBALL S*", "*"}, 729 /*num_sense_keys*/0, 730 sizeof(quantum_fireball_entries)/sizeof(struct asc_table_entry), 731 /*sense key entries*/NULL, 732 quantum_fireball_entries 733 }, 734 { 735 /* 736 * This Sony MO drive likes to return 0x04, 0x00 when it 737 * isn't spun up. 738 */ 739 {T_DIRECT, SIP_MEDIA_REMOVABLE, "SONY", "SMO-*", "*"}, 740 /*num_sense_keys*/0, 741 sizeof(sony_mo_entries)/sizeof(struct asc_table_entry), 742 /*sense key entries*/NULL, 743 sony_mo_entries 744 } 745 }; 746 747 const int sense_quirk_table_size = 748 sizeof(sense_quirk_table)/sizeof(sense_quirk_table[0]); 749 750 static struct asc_table_entry asc_table[] = { 751 /* 752 * From: http://www.t10.org/lists/asc-num.txt 753 * Modifications by Jung-uk Kim (jkim@FreeBSD.org) 754 */ 755 /* 756 * File: ASC-NUM.TXT 757 * 758 * SCSI ASC/ASCQ Assignments 759 * Numeric Sorted Listing 760 * as of 7/29/08 761 * 762 * D - DIRECT ACCESS DEVICE (SBC-2) device column key 763 * .T - SEQUENTIAL ACCESS DEVICE (SSC) ------------------- 764 * . L - PRINTER DEVICE (SSC) blank = reserved 765 * . P - PROCESSOR DEVICE (SPC) not blank = allowed 766 * . .W - WRITE ONCE READ MULTIPLE DEVICE (SBC-2) 767 * . . R - CD DEVICE (MMC) 768 * . . O - OPTICAL MEMORY DEVICE (SBC-2) 769 * . . .M - MEDIA CHANGER DEVICE (SMC) 770 * . . . A - STORAGE ARRAY DEVICE (SCC) 771 * . . . E - ENCLOSURE SERVICES DEVICE (SES) 772 * . . . .B - SIMPLIFIED DIRECT-ACCESS DEVICE (RBC) 773 * . . . . K - OPTICAL CARD READER/WRITER DEVICE (OCRW) 774 * . . . . V - AUTOMATION/DRIVE INTERFACE (ADC) 775 * . . . . .F - OBJECT-BASED STORAGE (OSD) 776 * DTLPWROMAEBKVF 777 * ASC ASCQ Action 778 * Description 779 */ 780 /* DTLPWROMAEBKVF */ 781 { SST(0x00, 0x00, SS_NOP, 782 "No additional sense information") }, 783 /* T */ 784 { SST(0x00, 0x01, SS_RDEF, 785 "Filemark detected") }, 786 /* T */ 787 { SST(0x00, 0x02, SS_RDEF, 788 "End-of-partition/medium detected") }, 789 /* T */ 790 { SST(0x00, 0x03, SS_RDEF, 791 "Setmark detected") }, 792 /* T */ 793 { SST(0x00, 0x04, SS_RDEF, 794 "Beginning-of-partition/medium detected") }, 795 /* TL */ 796 { SST(0x00, 0x05, SS_RDEF, 797 "End-of-data detected") }, 798 /* DTLPWROMAEBKVF */ 799 { SST(0x00, 0x06, SS_RDEF, 800 "I/O process terminated") }, 801 /* T */ 802 { SST(0x00, 0x07, SS_RDEF, /* XXX TBD */ 803 "Programmable early warning detected") }, 804 /* R */ 805 { SST(0x00, 0x11, SS_FATAL | EBUSY, 806 "Audio play operation in progress") }, 807 /* R */ 808 { SST(0x00, 0x12, SS_NOP, 809 "Audio play operation paused") }, 810 /* R */ 811 { SST(0x00, 0x13, SS_NOP, 812 "Audio play operation successfully completed") }, 813 /* R */ 814 { SST(0x00, 0x14, SS_RDEF, 815 "Audio play operation stopped due to error") }, 816 /* R */ 817 { SST(0x00, 0x15, SS_NOP, 818 "No current audio status to return") }, 819 /* DTLPWROMAEBKVF */ 820 { SST(0x00, 0x16, SS_FATAL | EBUSY, 821 "Operation in progress") }, 822 /* DTL WROMAEBKVF */ 823 { SST(0x00, 0x17, SS_RDEF, 824 "Cleaning requested") }, 825 /* T */ 826 { SST(0x00, 0x18, SS_RDEF, /* XXX TBD */ 827 "Erase operation in progress") }, 828 /* T */ 829 { SST(0x00, 0x19, SS_RDEF, /* XXX TBD */ 830 "Locate operation in progress") }, 831 /* T */ 832 { SST(0x00, 0x1A, SS_RDEF, /* XXX TBD */ 833 "Rewind operation in progress") }, 834 /* T */ 835 { SST(0x00, 0x1B, SS_RDEF, /* XXX TBD */ 836 "Set capacity operation in progress") }, 837 /* T */ 838 { SST(0x00, 0x1C, SS_RDEF, /* XXX TBD */ 839 "Verify operation in progress") }, 840 /* DT B */ 841 { SST(0x00, 0x1D, SS_RDEF, /* XXX TBD */ 842 "ATA pass through information available") }, 843 /* DT R MAEBKV */ 844 { SST(0x00, 0x1E, SS_RDEF, /* XXX TBD */ 845 "Conflicting SA creation request") }, 846 /* D W O BK */ 847 { SST(0x01, 0x00, SS_RDEF, 848 "No index/sector signal") }, 849 /* D WRO BK */ 850 { SST(0x02, 0x00, SS_RDEF, 851 "No seek complete") }, 852 /* DTL W O BK */ 853 { SST(0x03, 0x00, SS_RDEF, 854 "Peripheral device write fault") }, 855 /* T */ 856 { SST(0x03, 0x01, SS_RDEF, 857 "No write current") }, 858 /* T */ 859 { SST(0x03, 0x02, SS_RDEF, 860 "Excessive write errors") }, 861 /* DTLPWROMAEBKVF */ 862 { SST(0x04, 0x00, SS_TUR | SSQ_MANY | SSQ_DECREMENT_COUNT | EIO, 863 "Logical unit not ready, cause not reportable") }, 864 /* DTLPWROMAEBKVF */ 865 { SST(0x04, 0x01, SS_TUR | SSQ_MANY | SSQ_DECREMENT_COUNT | EBUSY, 866 "Logical unit is in process of becoming ready") }, 867 /* DTLPWROMAEBKVF */ 868 { SST(0x04, 0x02, SS_START | SSQ_DECREMENT_COUNT | ENXIO, 869 "Logical unit not ready, initializing command required") }, 870 /* DTLPWROMAEBKVF */ 871 { SST(0x04, 0x03, SS_FATAL | ENXIO, 872 "Logical unit not ready, manual intervention required") }, 873 /* DTL RO B */ 874 { SST(0x04, 0x04, SS_FATAL | EBUSY, 875 "Logical unit not ready, format in progress") }, 876 /* DT W O A BK F */ 877 { SST(0x04, 0x05, SS_FATAL | EBUSY, 878 "Logical unit not ready, rebuild in progress") }, 879 /* DT W O A BK */ 880 { SST(0x04, 0x06, SS_FATAL | EBUSY, 881 "Logical unit not ready, recalculation in progress") }, 882 /* DTLPWROMAEBKVF */ 883 { SST(0x04, 0x07, SS_FATAL | EBUSY, 884 "Logical unit not ready, operation in progress") }, 885 /* R */ 886 { SST(0x04, 0x08, SS_FATAL | EBUSY, 887 "Logical unit not ready, long write in progress") }, 888 /* DTLPWROMAEBKVF */ 889 { SST(0x04, 0x09, SS_RDEF, /* XXX TBD */ 890 "Logical unit not ready, self-test in progress") }, 891 /* DTLPWROMAEBKVF */ 892 { SST(0x04, 0x0A, SS_RDEF, /* XXX TBD */ 893 "Logical unit not accessible, asymmetric access state transition")}, 894 /* DTLPWROMAEBKVF */ 895 { SST(0x04, 0x0B, SS_RDEF, /* XXX TBD */ 896 "Logical unit not accessible, target port in standby state") }, 897 /* DTLPWROMAEBKVF */ 898 { SST(0x04, 0x0C, SS_RDEF, /* XXX TBD */ 899 "Logical unit not accessible, target port in unavailable state") }, 900 /* F */ 901 { SST(0x04, 0x0D, SS_RDEF, /* XXX TBD */ 902 "Logical unit not ready, structure check required") }, 903 /* DT WROM B */ 904 { SST(0x04, 0x10, SS_RDEF, /* XXX TBD */ 905 "Logical unit not ready, auxiliary memory not accessible") }, 906 /* DT WRO AEB VF */ 907 { SST(0x04, 0x11, SS_RDEF, /* XXX TBD */ 908 "Logical unit not ready, notify (enable spinup) required") }, 909 /* M V */ 910 { SST(0x04, 0x12, SS_RDEF, /* XXX TBD */ 911 "Logical unit not ready, offline") }, 912 /* DT R MAEBKV */ 913 { SST(0x04, 0x13, SS_RDEF, /* XXX TBD */ 914 "Logical unit not ready, SA creation in progress") }, 915 /* DTL WROMAEBKVF */ 916 { SST(0x05, 0x00, SS_RDEF, 917 "Logical unit does not respond to selection") }, 918 /* D WROM BK */ 919 { SST(0x06, 0x00, SS_RDEF, 920 "No reference position found") }, 921 /* DTL WROM BK */ 922 { SST(0x07, 0x00, SS_RDEF, 923 "Multiple peripheral devices selected") }, 924 /* DTL WROMAEBKVF */ 925 { SST(0x08, 0x00, SS_RDEF, 926 "Logical unit communication failure") }, 927 /* DTL WROMAEBKVF */ 928 { SST(0x08, 0x01, SS_RDEF, 929 "Logical unit communication time-out") }, 930 /* DTL WROMAEBKVF */ 931 { SST(0x08, 0x02, SS_RDEF, 932 "Logical unit communication parity error") }, 933 /* DT ROM BK */ 934 { SST(0x08, 0x03, SS_RDEF, 935 "Logical unit communication CRC error (Ultra-DMA/32)") }, 936 /* DTLPWRO K */ 937 { SST(0x08, 0x04, SS_RDEF, /* XXX TBD */ 938 "Unreachable copy target") }, 939 /* DT WRO B */ 940 { SST(0x09, 0x00, SS_RDEF, 941 "Track following error") }, 942 /* WRO K */ 943 { SST(0x09, 0x01, SS_RDEF, 944 "Tracking servo failure") }, 945 /* WRO K */ 946 { SST(0x09, 0x02, SS_RDEF, 947 "Focus servo failure") }, 948 /* WRO */ 949 { SST(0x09, 0x03, SS_RDEF, 950 "Spindle servo failure") }, 951 /* DT WRO B */ 952 { SST(0x09, 0x04, SS_RDEF, 953 "Head select fault") }, 954 /* DTLPWROMAEBKVF */ 955 { SST(0x0A, 0x00, SS_FATAL | ENOSPC, 956 "Error log overflow") }, 957 /* DTLPWROMAEBKVF */ 958 { SST(0x0B, 0x00, SS_RDEF, 959 "Warning") }, 960 /* DTLPWROMAEBKVF */ 961 { SST(0x0B, 0x01, SS_RDEF, 962 "Warning - specified temperature exceeded") }, 963 /* DTLPWROMAEBKVF */ 964 { SST(0x0B, 0x02, SS_RDEF, 965 "Warning - enclosure degraded") }, 966 /* DTLPWROMAEBKVF */ 967 { SST(0x0B, 0x03, SS_RDEF, /* XXX TBD */ 968 "Warning - background self-test failed") }, 969 /* DTLPWRO AEBKVF */ 970 { SST(0x0B, 0x04, SS_RDEF, /* XXX TBD */ 971 "Warning - background pre-scan detected medium error") }, 972 /* DTLPWRO AEBKVF */ 973 { SST(0x0B, 0x05, SS_RDEF, /* XXX TBD */ 974 "Warning - background medium scan detected medium error") }, 975 /* DTLPWROMAEBKVF */ 976 { SST(0x0B, 0x06, SS_RDEF, /* XXX TBD */ 977 "Warning - non-volatile cache now volatile") }, 978 /* DTLPWROMAEBKVF */ 979 { SST(0x0B, 0x07, SS_RDEF, /* XXX TBD */ 980 "Warning - degraded power to non-volatile cache") }, 981 /* T R */ 982 { SST(0x0C, 0x00, SS_RDEF, 983 "Write error") }, 984 /* K */ 985 { SST(0x0C, 0x01, SS_NOP | SSQ_PRINT_SENSE, 986 "Write error - recovered with auto reallocation") }, 987 /* D W O BK */ 988 { SST(0x0C, 0x02, SS_RDEF, 989 "Write error - auto reallocation failed") }, 990 /* D W O BK */ 991 { SST(0x0C, 0x03, SS_RDEF, 992 "Write error - recommend reassignment") }, 993 /* DT W O B */ 994 { SST(0x0C, 0x04, SS_RDEF, 995 "Compression check miscompare error") }, 996 /* DT W O B */ 997 { SST(0x0C, 0x05, SS_RDEF, 998 "Data expansion occurred during compression") }, 999 /* DT W O B */ 1000 { SST(0x0C, 0x06, SS_RDEF, 1001 "Block not compressible") }, 1002 /* R */ 1003 { SST(0x0C, 0x07, SS_RDEF, 1004 "Write error - recovery needed") }, 1005 /* R */ 1006 { SST(0x0C, 0x08, SS_RDEF, 1007 "Write error - recovery failed") }, 1008 /* R */ 1009 { SST(0x0C, 0x09, SS_RDEF, 1010 "Write error - loss of streaming") }, 1011 /* R */ 1012 { SST(0x0C, 0x0A, SS_RDEF, 1013 "Write error - padding blocks added") }, 1014 /* DT WROM B */ 1015 { SST(0x0C, 0x0B, SS_RDEF, /* XXX TBD */ 1016 "Auxiliary memory write error") }, 1017 /* DTLPWRO AEBKVF */ 1018 { SST(0x0C, 0x0C, SS_RDEF, /* XXX TBD */ 1019 "Write error - unexpected unsolicited data") }, 1020 /* DTLPWRO AEBKVF */ 1021 { SST(0x0C, 0x0D, SS_RDEF, /* XXX TBD */ 1022 "Write error - not enough unsolicited data") }, 1023 /* R */ 1024 { SST(0x0C, 0x0F, SS_RDEF, /* XXX TBD */ 1025 "Defects in error window") }, 1026 /* DTLPWRO A K */ 1027 { SST(0x0D, 0x00, SS_RDEF, /* XXX TBD */ 1028 "Error detected by third party temporary initiator") }, 1029 /* DTLPWRO A K */ 1030 { SST(0x0D, 0x01, SS_RDEF, /* XXX TBD */ 1031 "Third party device failure") }, 1032 /* DTLPWRO A K */ 1033 { SST(0x0D, 0x02, SS_RDEF, /* XXX TBD */ 1034 "Copy target device not reachable") }, 1035 /* DTLPWRO A K */ 1036 { SST(0x0D, 0x03, SS_RDEF, /* XXX TBD */ 1037 "Incorrect copy target device type") }, 1038 /* DTLPWRO A K */ 1039 { SST(0x0D, 0x04, SS_RDEF, /* XXX TBD */ 1040 "Copy target device data underrun") }, 1041 /* DTLPWRO A K */ 1042 { SST(0x0D, 0x05, SS_RDEF, /* XXX TBD */ 1043 "Copy target device data overrun") }, 1044 /* DT PWROMAEBK F */ 1045 { SST(0x0E, 0x00, SS_RDEF, /* XXX TBD */ 1046 "Invalid information unit") }, 1047 /* DT PWROMAEBK F */ 1048 { SST(0x0E, 0x01, SS_RDEF, /* XXX TBD */ 1049 "Information unit too short") }, 1050 /* DT PWROMAEBK F */ 1051 { SST(0x0E, 0x02, SS_RDEF, /* XXX TBD */ 1052 "Information unit too long") }, 1053 /* DT P R MAEBK F */ 1054 { SST(0x0E, 0x03, SS_RDEF, /* XXX TBD */ 1055 "Invalid field in command information unit") }, 1056 /* D W O BK */ 1057 { SST(0x10, 0x00, SS_RDEF, 1058 "ID CRC or ECC error") }, 1059 /* DT W O */ 1060 { SST(0x10, 0x01, SS_RDEF, /* XXX TBD */ 1061 "Logical block guard check failed") }, 1062 /* DT W O */ 1063 { SST(0x10, 0x02, SS_RDEF, /* XXX TBD */ 1064 "Logical block application tag check failed") }, 1065 /* DT W O */ 1066 { SST(0x10, 0x03, SS_RDEF, /* XXX TBD */ 1067 "Logical block reference tag check failed") }, 1068 /* DT WRO BK */ 1069 { SST(0x11, 0x00, SS_RDEF, 1070 "Unrecovered read error") }, 1071 /* DT WRO BK */ 1072 { SST(0x11, 0x01, SS_RDEF, 1073 "Read retries exhausted") }, 1074 /* DT WRO BK */ 1075 { SST(0x11, 0x02, SS_RDEF, 1076 "Error too long to correct") }, 1077 /* DT W O BK */ 1078 { SST(0x11, 0x03, SS_RDEF, 1079 "Multiple read errors") }, 1080 /* D W O BK */ 1081 { SST(0x11, 0x04, SS_RDEF, 1082 "Unrecovered read error - auto reallocate failed") }, 1083 /* WRO B */ 1084 { SST(0x11, 0x05, SS_RDEF, 1085 "L-EC uncorrectable error") }, 1086 /* WRO B */ 1087 { SST(0x11, 0x06, SS_RDEF, 1088 "CIRC unrecovered error") }, 1089 /* W O B */ 1090 { SST(0x11, 0x07, SS_RDEF, 1091 "Data re-synchronization error") }, 1092 /* T */ 1093 { SST(0x11, 0x08, SS_RDEF, 1094 "Incomplete block read") }, 1095 /* T */ 1096 { SST(0x11, 0x09, SS_RDEF, 1097 "No gap found") }, 1098 /* DT O BK */ 1099 { SST(0x11, 0x0A, SS_RDEF, 1100 "Miscorrected error") }, 1101 /* D W O BK */ 1102 { SST(0x11, 0x0B, SS_RDEF, 1103 "Unrecovered read error - recommend reassignment") }, 1104 /* D W O BK */ 1105 { SST(0x11, 0x0C, SS_RDEF, 1106 "Unrecovered read error - recommend rewrite the data") }, 1107 /* DT WRO B */ 1108 { SST(0x11, 0x0D, SS_RDEF, 1109 "De-compression CRC error") }, 1110 /* DT WRO B */ 1111 { SST(0x11, 0x0E, SS_RDEF, 1112 "Cannot decompress using declared algorithm") }, 1113 /* R */ 1114 { SST(0x11, 0x0F, SS_RDEF, 1115 "Error reading UPC/EAN number") }, 1116 /* R */ 1117 { SST(0x11, 0x10, SS_RDEF, 1118 "Error reading ISRC number") }, 1119 /* R */ 1120 { SST(0x11, 0x11, SS_RDEF, 1121 "Read error - loss of streaming") }, 1122 /* DT WROM B */ 1123 { SST(0x11, 0x12, SS_RDEF, /* XXX TBD */ 1124 "Auxiliary memory read error") }, 1125 /* DTLPWRO AEBKVF */ 1126 { SST(0x11, 0x13, SS_RDEF, /* XXX TBD */ 1127 "Read error - failed retransmission request") }, 1128 /* D */ 1129 { SST(0x11, 0x14, SS_RDEF, /* XXX TBD */ 1130 "Read error - LBA marked bad by application client") }, 1131 /* D W O BK */ 1132 { SST(0x12, 0x00, SS_RDEF, 1133 "Address mark not found for ID field") }, 1134 /* D W O BK */ 1135 { SST(0x13, 0x00, SS_RDEF, 1136 "Address mark not found for data field") }, 1137 /* DTL WRO BK */ 1138 { SST(0x14, 0x00, SS_RDEF, 1139 "Recorded entity not found") }, 1140 /* DT WRO BK */ 1141 { SST(0x14, 0x01, SS_RDEF, 1142 "Record not found") }, 1143 /* T */ 1144 { SST(0x14, 0x02, SS_RDEF, 1145 "Filemark or setmark not found") }, 1146 /* T */ 1147 { SST(0x14, 0x03, SS_RDEF, 1148 "End-of-data not found") }, 1149 /* T */ 1150 { SST(0x14, 0x04, SS_RDEF, 1151 "Block sequence error") }, 1152 /* DT W O BK */ 1153 { SST(0x14, 0x05, SS_RDEF, 1154 "Record not found - recommend reassignment") }, 1155 /* DT W O BK */ 1156 { SST(0x14, 0x06, SS_RDEF, 1157 "Record not found - data auto-reallocated") }, 1158 /* T */ 1159 { SST(0x14, 0x07, SS_RDEF, /* XXX TBD */ 1160 "Locate operation failure") }, 1161 /* DTL WROM BK */ 1162 { SST(0x15, 0x00, SS_RDEF, 1163 "Random positioning error") }, 1164 /* DTL WROM BK */ 1165 { SST(0x15, 0x01, SS_RDEF, 1166 "Mechanical positioning error") }, 1167 /* DT WRO BK */ 1168 { SST(0x15, 0x02, SS_RDEF, 1169 "Positioning error detected by read of medium") }, 1170 /* D W O BK */ 1171 { SST(0x16, 0x00, SS_RDEF, 1172 "Data synchronization mark error") }, 1173 /* D W O BK */ 1174 { SST(0x16, 0x01, SS_RDEF, 1175 "Data sync error - data rewritten") }, 1176 /* D W O BK */ 1177 { SST(0x16, 0x02, SS_RDEF, 1178 "Data sync error - recommend rewrite") }, 1179 /* D W O BK */ 1180 { SST(0x16, 0x03, SS_NOP | SSQ_PRINT_SENSE, 1181 "Data sync error - data auto-reallocated") }, 1182 /* D W O BK */ 1183 { SST(0x16, 0x04, SS_RDEF, 1184 "Data sync error - recommend reassignment") }, 1185 /* DT WRO BK */ 1186 { SST(0x17, 0x00, SS_NOP | SSQ_PRINT_SENSE, 1187 "Recovered data with no error correction applied") }, 1188 /* DT WRO BK */ 1189 { SST(0x17, 0x01, SS_NOP | SSQ_PRINT_SENSE, 1190 "Recovered data with retries") }, 1191 /* DT WRO BK */ 1192 { SST(0x17, 0x02, SS_NOP | SSQ_PRINT_SENSE, 1193 "Recovered data with positive head offset") }, 1194 /* DT WRO BK */ 1195 { SST(0x17, 0x03, SS_NOP | SSQ_PRINT_SENSE, 1196 "Recovered data with negative head offset") }, 1197 /* WRO B */ 1198 { SST(0x17, 0x04, SS_NOP | SSQ_PRINT_SENSE, 1199 "Recovered data with retries and/or CIRC applied") }, 1200 /* D WRO BK */ 1201 { SST(0x17, 0x05, SS_NOP | SSQ_PRINT_SENSE, 1202 "Recovered data using previous sector ID") }, 1203 /* D W O BK */ 1204 { SST(0x17, 0x06, SS_NOP | SSQ_PRINT_SENSE, 1205 "Recovered data without ECC - data auto-reallocated") }, 1206 /* D WRO BK */ 1207 { SST(0x17, 0x07, SS_NOP | SSQ_PRINT_SENSE, 1208 "Recovered data without ECC - recommend reassignment") }, 1209 /* D WRO BK */ 1210 { SST(0x17, 0x08, SS_NOP | SSQ_PRINT_SENSE, 1211 "Recovered data without ECC - recommend rewrite") }, 1212 /* D WRO BK */ 1213 { SST(0x17, 0x09, SS_NOP | SSQ_PRINT_SENSE, 1214 "Recovered data without ECC - data rewritten") }, 1215 /* DT WRO BK */ 1216 { SST(0x18, 0x00, SS_NOP | SSQ_PRINT_SENSE, 1217 "Recovered data with error correction applied") }, 1218 /* D WRO BK */ 1219 { SST(0x18, 0x01, SS_NOP | SSQ_PRINT_SENSE, 1220 "Recovered data with error corr. & retries applied") }, 1221 /* D WRO BK */ 1222 { SST(0x18, 0x02, SS_NOP | SSQ_PRINT_SENSE, 1223 "Recovered data - data auto-reallocated") }, 1224 /* R */ 1225 { SST(0x18, 0x03, SS_NOP | SSQ_PRINT_SENSE, 1226 "Recovered data with CIRC") }, 1227 /* R */ 1228 { SST(0x18, 0x04, SS_NOP | SSQ_PRINT_SENSE, 1229 "Recovered data with L-EC") }, 1230 /* D WRO BK */ 1231 { SST(0x18, 0x05, SS_NOP | SSQ_PRINT_SENSE, 1232 "Recovered data - recommend reassignment") }, 1233 /* D WRO BK */ 1234 { SST(0x18, 0x06, SS_NOP | SSQ_PRINT_SENSE, 1235 "Recovered data - recommend rewrite") }, 1236 /* D W O BK */ 1237 { SST(0x18, 0x07, SS_NOP | SSQ_PRINT_SENSE, 1238 "Recovered data with ECC - data rewritten") }, 1239 /* R */ 1240 { SST(0x18, 0x08, SS_RDEF, /* XXX TBD */ 1241 "Recovered data with linking") }, 1242 /* D O K */ 1243 { SST(0x19, 0x00, SS_RDEF, 1244 "Defect list error") }, 1245 /* D O K */ 1246 { SST(0x19, 0x01, SS_RDEF, 1247 "Defect list not available") }, 1248 /* D O K */ 1249 { SST(0x19, 0x02, SS_RDEF, 1250 "Defect list error in primary list") }, 1251 /* D O K */ 1252 { SST(0x19, 0x03, SS_RDEF, 1253 "Defect list error in grown list") }, 1254 /* DTLPWROMAEBKVF */ 1255 { SST(0x1A, 0x00, SS_RDEF, 1256 "Parameter list length error") }, 1257 /* DTLPWROMAEBKVF */ 1258 { SST(0x1B, 0x00, SS_RDEF, 1259 "Synchronous data transfer error") }, 1260 /* D O BK */ 1261 { SST(0x1C, 0x00, SS_RDEF, 1262 "Defect list not found") }, 1263 /* D O BK */ 1264 { SST(0x1C, 0x01, SS_RDEF, 1265 "Primary defect list not found") }, 1266 /* D O BK */ 1267 { SST(0x1C, 0x02, SS_RDEF, 1268 "Grown defect list not found") }, 1269 /* DT WRO BK */ 1270 { SST(0x1D, 0x00, SS_FATAL, 1271 "Miscompare during verify operation") }, 1272 /* D W O BK */ 1273 { SST(0x1E, 0x00, SS_NOP | SSQ_PRINT_SENSE, 1274 "Recovered ID with ECC correction") }, 1275 /* D O K */ 1276 { SST(0x1F, 0x00, SS_RDEF, 1277 "Partial defect list transfer") }, 1278 /* DTLPWROMAEBKVF */ 1279 { SST(0x20, 0x00, SS_FATAL | EINVAL, 1280 "Invalid command operation code") }, 1281 /* DT PWROMAEBK */ 1282 { SST(0x20, 0x01, SS_RDEF, /* XXX TBD */ 1283 "Access denied - initiator pending-enrolled") }, 1284 /* DT PWROMAEBK */ 1285 { SST(0x20, 0x02, SS_RDEF, /* XXX TBD */ 1286 "Access denied - no access rights") }, 1287 /* DT PWROMAEBK */ 1288 { SST(0x20, 0x03, SS_RDEF, /* XXX TBD */ 1289 "Access denied - invalid mgmt ID key") }, 1290 /* T */ 1291 { SST(0x20, 0x04, SS_RDEF, /* XXX TBD */ 1292 "Illegal command while in write capable state") }, 1293 /* T */ 1294 { SST(0x20, 0x05, SS_RDEF, /* XXX TBD */ 1295 "Obsolete") }, 1296 /* T */ 1297 { SST(0x20, 0x06, SS_RDEF, /* XXX TBD */ 1298 "Illegal command while in explicit address mode") }, 1299 /* T */ 1300 { SST(0x20, 0x07, SS_RDEF, /* XXX TBD */ 1301 "Illegal command while in implicit address mode") }, 1302 /* DT PWROMAEBK */ 1303 { SST(0x20, 0x08, SS_RDEF, /* XXX TBD */ 1304 "Access denied - enrollment conflict") }, 1305 /* DT PWROMAEBK */ 1306 { SST(0x20, 0x09, SS_RDEF, /* XXX TBD */ 1307 "Access denied - invalid LU identifier") }, 1308 /* DT PWROMAEBK */ 1309 { SST(0x20, 0x0A, SS_RDEF, /* XXX TBD */ 1310 "Access denied - invalid proxy token") }, 1311 /* DT PWROMAEBK */ 1312 { SST(0x20, 0x0B, SS_RDEF, /* XXX TBD */ 1313 "Access denied - ACL LUN conflict") }, 1314 /* DT WRO BK */ 1315 { SST(0x21, 0x00, SS_FATAL | EINVAL, 1316 "Logical block address out of range") }, 1317 /* DT WROM BK */ 1318 { SST(0x21, 0x01, SS_FATAL | EINVAL, 1319 "Invalid element address") }, 1320 /* R */ 1321 { SST(0x21, 0x02, SS_RDEF, /* XXX TBD */ 1322 "Invalid address for write") }, 1323 /* R */ 1324 { SST(0x21, 0x03, SS_RDEF, /* XXX TBD */ 1325 "Invalid write crossing layer jump") }, 1326 /* D */ 1327 { SST(0x22, 0x00, SS_FATAL | EINVAL, 1328 "Illegal function (use 20 00, 24 00, or 26 00)") }, 1329 /* DTLPWROMAEBKVF */ 1330 { SST(0x24, 0x00, SS_FATAL | EINVAL, 1331 "Invalid field in CDB") }, 1332 /* DTLPWRO AEBKVF */ 1333 { SST(0x24, 0x01, SS_RDEF, /* XXX TBD */ 1334 "CDB decryption error") }, 1335 /* T */ 1336 { SST(0x24, 0x02, SS_RDEF, /* XXX TBD */ 1337 "Obsolete") }, 1338 /* T */ 1339 { SST(0x24, 0x03, SS_RDEF, /* XXX TBD */ 1340 "Obsolete") }, 1341 /* F */ 1342 { SST(0x24, 0x04, SS_RDEF, /* XXX TBD */ 1343 "Security audit value frozen") }, 1344 /* F */ 1345 { SST(0x24, 0x05, SS_RDEF, /* XXX TBD */ 1346 "Security working key frozen") }, 1347 /* F */ 1348 { SST(0x24, 0x06, SS_RDEF, /* XXX TBD */ 1349 "NONCE not unique") }, 1350 /* F */ 1351 { SST(0x24, 0x07, SS_RDEF, /* XXX TBD */ 1352 "NONCE timestamp out of range") }, 1353 /* DT R MAEBKV */ 1354 { SST(0x24, 0x08, SS_RDEF, /* XXX TBD */ 1355 "Invalid XCDB") }, 1356 /* DTLPWROMAEBKVF */ 1357 { SST(0x25, 0x00, SS_FATAL | ENXIO, 1358 "Logical unit not supported") }, 1359 /* DTLPWROMAEBKVF */ 1360 { SST(0x26, 0x00, SS_FATAL | EINVAL, 1361 "Invalid field in parameter list") }, 1362 /* DTLPWROMAEBKVF */ 1363 { SST(0x26, 0x01, SS_FATAL | EINVAL, 1364 "Parameter not supported") }, 1365 /* DTLPWROMAEBKVF */ 1366 { SST(0x26, 0x02, SS_FATAL | EINVAL, 1367 "Parameter value invalid") }, 1368 /* DTLPWROMAE K */ 1369 { SST(0x26, 0x03, SS_FATAL | EINVAL, 1370 "Threshold parameters not supported") }, 1371 /* DTLPWROMAEBKVF */ 1372 { SST(0x26, 0x04, SS_FATAL | EINVAL, 1373 "Invalid release of persistent reservation") }, 1374 /* DTLPWRO A BK */ 1375 { SST(0x26, 0x05, SS_RDEF, /* XXX TBD */ 1376 "Data decryption error") }, 1377 /* DTLPWRO K */ 1378 { SST(0x26, 0x06, SS_RDEF, /* XXX TBD */ 1379 "Too many target descriptors") }, 1380 /* DTLPWRO K */ 1381 { SST(0x26, 0x07, SS_RDEF, /* XXX TBD */ 1382 "Unsupported target descriptor type code") }, 1383 /* DTLPWRO K */ 1384 { SST(0x26, 0x08, SS_RDEF, /* XXX TBD */ 1385 "Too many segment descriptors") }, 1386 /* DTLPWRO K */ 1387 { SST(0x26, 0x09, SS_RDEF, /* XXX TBD */ 1388 "Unsupported segment descriptor type code") }, 1389 /* DTLPWRO K */ 1390 { SST(0x26, 0x0A, SS_RDEF, /* XXX TBD */ 1391 "Unexpected inexact segment") }, 1392 /* DTLPWRO K */ 1393 { SST(0x26, 0x0B, SS_RDEF, /* XXX TBD */ 1394 "Inline data length exceeded") }, 1395 /* DTLPWRO K */ 1396 { SST(0x26, 0x0C, SS_RDEF, /* XXX TBD */ 1397 "Invalid operation for copy source or destination") }, 1398 /* DTLPWRO K */ 1399 { SST(0x26, 0x0D, SS_RDEF, /* XXX TBD */ 1400 "Copy segment granularity violation") }, 1401 /* DT PWROMAEBK */ 1402 { SST(0x26, 0x0E, SS_RDEF, /* XXX TBD */ 1403 "Invalid parameter while port is enabled") }, 1404 /* F */ 1405 { SST(0x26, 0x0F, SS_RDEF, /* XXX TBD */ 1406 "Invalid data-out buffer integrity check value") }, 1407 /* T */ 1408 { SST(0x26, 0x10, SS_RDEF, /* XXX TBD */ 1409 "Data decryption key fail limit reached") }, 1410 /* T */ 1411 { SST(0x26, 0x11, SS_RDEF, /* XXX TBD */ 1412 "Incomplete key-associated data set") }, 1413 /* T */ 1414 { SST(0x26, 0x12, SS_RDEF, /* XXX TBD */ 1415 "Vendor specific key reference not found") }, 1416 /* DT WRO BK */ 1417 { SST(0x27, 0x00, SS_FATAL | EACCES, 1418 "Write protected") }, 1419 /* DT WRO BK */ 1420 { SST(0x27, 0x01, SS_FATAL | EACCES, 1421 "Hardware write protected") }, 1422 /* DT WRO BK */ 1423 { SST(0x27, 0x02, SS_FATAL | EACCES, 1424 "Logical unit software write protected") }, 1425 /* T R */ 1426 { SST(0x27, 0x03, SS_FATAL | EACCES, 1427 "Associated write protect") }, 1428 /* T R */ 1429 { SST(0x27, 0x04, SS_FATAL | EACCES, 1430 "Persistent write protect") }, 1431 /* T R */ 1432 { SST(0x27, 0x05, SS_FATAL | EACCES, 1433 "Permanent write protect") }, 1434 /* R F */ 1435 { SST(0x27, 0x06, SS_RDEF, /* XXX TBD */ 1436 "Conditional write protect") }, 1437 /* DTLPWROMAEBKVF */ 1438 { SST(0x28, 0x00, SS_FATAL | ENXIO, 1439 "Not ready to ready change, medium may have changed") }, 1440 /* DT WROM B */ 1441 { SST(0x28, 0x01, SS_FATAL | ENXIO, 1442 "Import or export element accessed") }, 1443 /* R */ 1444 { SST(0x28, 0x02, SS_RDEF, /* XXX TBD */ 1445 "Format-layer may have changed") }, 1446 /* M */ 1447 { SST(0x28, 0x03, SS_RDEF, /* XXX TBD */ 1448 "Import/export element accessed, medium changed") }, 1449 /* 1450 * XXX JGibbs - All of these should use the same errno, but I don't 1451 * think ENXIO is the correct choice. Should we borrow from 1452 * the networking errnos? ECONNRESET anyone? 1453 */ 1454 /* DTLPWROMAEBKVF */ 1455 { SST(0x29, 0x00, SS_FATAL | ENXIO, 1456 "Power on, reset, or bus device reset occurred") }, 1457 /* DTLPWROMAEBKVF */ 1458 { SST(0x29, 0x01, SS_RDEF, 1459 "Power on occurred") }, 1460 /* DTLPWROMAEBKVF */ 1461 { SST(0x29, 0x02, SS_RDEF, 1462 "SCSI bus reset occurred") }, 1463 /* DTLPWROMAEBKVF */ 1464 { SST(0x29, 0x03, SS_RDEF, 1465 "Bus device reset function occurred") }, 1466 /* DTLPWROMAEBKVF */ 1467 { SST(0x29, 0x04, SS_RDEF, 1468 "Device internal reset") }, 1469 /* DTLPWROMAEBKVF */ 1470 { SST(0x29, 0x05, SS_RDEF, 1471 "Transceiver mode changed to single-ended") }, 1472 /* DTLPWROMAEBKVF */ 1473 { SST(0x29, 0x06, SS_RDEF, 1474 "Transceiver mode changed to LVD") }, 1475 /* DTLPWROMAEBKVF */ 1476 { SST(0x29, 0x07, SS_RDEF, /* XXX TBD */ 1477 "I_T nexus loss occurred") }, 1478 /* DTL WROMAEBKVF */ 1479 { SST(0x2A, 0x00, SS_RDEF, 1480 "Parameters changed") }, 1481 /* DTL WROMAEBKVF */ 1482 { SST(0x2A, 0x01, SS_RDEF, 1483 "Mode parameters changed") }, 1484 /* DTL WROMAE K */ 1485 { SST(0x2A, 0x02, SS_RDEF, 1486 "Log parameters changed") }, 1487 /* DTLPWROMAE K */ 1488 { SST(0x2A, 0x03, SS_RDEF, 1489 "Reservations preempted") }, 1490 /* DTLPWROMAE */ 1491 { SST(0x2A, 0x04, SS_RDEF, /* XXX TBD */ 1492 "Reservations released") }, 1493 /* DTLPWROMAE */ 1494 { SST(0x2A, 0x05, SS_RDEF, /* XXX TBD */ 1495 "Registrations preempted") }, 1496 /* DTLPWROMAEBKVF */ 1497 { SST(0x2A, 0x06, SS_RDEF, /* XXX TBD */ 1498 "Asymmetric access state changed") }, 1499 /* DTLPWROMAEBKVF */ 1500 { SST(0x2A, 0x07, SS_RDEF, /* XXX TBD */ 1501 "Implicit asymmetric access state transition failed") }, 1502 /* DT WROMAEBKVF */ 1503 { SST(0x2A, 0x08, SS_RDEF, /* XXX TBD */ 1504 "Priority changed") }, 1505 /* D */ 1506 { SST(0x2A, 0x09, SS_RDEF, /* XXX TBD */ 1507 "Capacity data has changed") }, 1508 /* DT */ 1509 { SST(0x2A, 0x0A, SS_RDEF, /* XXX TBD */ 1510 "Error history I_T nexus cleared") }, 1511 /* DT */ 1512 { SST(0x2A, 0x0B, SS_RDEF, /* XXX TBD */ 1513 "Error history snapshot released") }, 1514 /* F */ 1515 { SST(0x2A, 0x0C, SS_RDEF, /* XXX TBD */ 1516 "Error recovery attributes have changed") }, 1517 /* T */ 1518 { SST(0x2A, 0x0D, SS_RDEF, /* XXX TBD */ 1519 "Data encryption capabilities changed") }, 1520 /* DT M E V */ 1521 { SST(0x2A, 0x10, SS_RDEF, /* XXX TBD */ 1522 "Timestamp changed") }, 1523 /* T */ 1524 { SST(0x2A, 0x11, SS_RDEF, /* XXX TBD */ 1525 "Data encryption parameters changed by another I_T nexus") }, 1526 /* T */ 1527 { SST(0x2A, 0x12, SS_RDEF, /* XXX TBD */ 1528 "Data encryption parameters changed by vendor specific event") }, 1529 /* T */ 1530 { SST(0x2A, 0x13, SS_RDEF, /* XXX TBD */ 1531 "Data encryption key instance counter has changed") }, 1532 /* DT R MAEBKV */ 1533 { SST(0x2A, 0x14, SS_RDEF, /* XXX TBD */ 1534 "SA creation capabilities data has changed") }, 1535 /* DTLPWRO K */ 1536 { SST(0x2B, 0x00, SS_RDEF, 1537 "Copy cannot execute since host cannot disconnect") }, 1538 /* DTLPWROMAEBKVF */ 1539 { SST(0x2C, 0x00, SS_RDEF, 1540 "Command sequence error") }, 1541 /* */ 1542 { SST(0x2C, 0x01, SS_RDEF, 1543 "Too many windows specified") }, 1544 /* */ 1545 { SST(0x2C, 0x02, SS_RDEF, 1546 "Invalid combination of windows specified") }, 1547 /* R */ 1548 { SST(0x2C, 0x03, SS_RDEF, 1549 "Current program area is not empty") }, 1550 /* R */ 1551 { SST(0x2C, 0x04, SS_RDEF, 1552 "Current program area is empty") }, 1553 /* B */ 1554 { SST(0x2C, 0x05, SS_RDEF, /* XXX TBD */ 1555 "Illegal power condition request") }, 1556 /* R */ 1557 { SST(0x2C, 0x06, SS_RDEF, /* XXX TBD */ 1558 "Persistent prevent conflict") }, 1559 /* DTLPWROMAEBKVF */ 1560 { SST(0x2C, 0x07, SS_RDEF, /* XXX TBD */ 1561 "Previous busy status") }, 1562 /* DTLPWROMAEBKVF */ 1563 { SST(0x2C, 0x08, SS_RDEF, /* XXX TBD */ 1564 "Previous task set full status") }, 1565 /* DTLPWROM EBKVF */ 1566 { SST(0x2C, 0x09, SS_RDEF, /* XXX TBD */ 1567 "Previous reservation conflict status") }, 1568 /* F */ 1569 { SST(0x2C, 0x0A, SS_RDEF, /* XXX TBD */ 1570 "Partition or collection contains user objects") }, 1571 /* T */ 1572 { SST(0x2C, 0x0B, SS_RDEF, /* XXX TBD */ 1573 "Not reserved") }, 1574 /* T */ 1575 { SST(0x2D, 0x00, SS_RDEF, 1576 "Overwrite error on update in place") }, 1577 /* R */ 1578 { SST(0x2E, 0x00, SS_RDEF, /* XXX TBD */ 1579 "Insufficient time for operation") }, 1580 /* DTLPWROMAEBKVF */ 1581 { SST(0x2F, 0x00, SS_RDEF, 1582 "Commands cleared by another initiator") }, 1583 /* D */ 1584 { SST(0x2F, 0x01, SS_RDEF, /* XXX TBD */ 1585 "Commands cleared by power loss notification") }, 1586 /* DTLPWROMAEBKVF */ 1587 { SST(0x2F, 0x02, SS_RDEF, /* XXX TBD */ 1588 "Commands cleared by device server") }, 1589 /* DT WROM BK */ 1590 { SST(0x30, 0x00, SS_RDEF, 1591 "Incompatible medium installed") }, 1592 /* DT WRO BK */ 1593 { SST(0x30, 0x01, SS_RDEF, 1594 "Cannot read medium - unknown format") }, 1595 /* DT WRO BK */ 1596 { SST(0x30, 0x02, SS_RDEF, 1597 "Cannot read medium - incompatible format") }, 1598 /* DT R K */ 1599 { SST(0x30, 0x03, SS_RDEF, 1600 "Cleaning cartridge installed") }, 1601 /* DT WRO BK */ 1602 { SST(0x30, 0x04, SS_RDEF, 1603 "Cannot write medium - unknown format") }, 1604 /* DT WRO BK */ 1605 { SST(0x30, 0x05, SS_RDEF, 1606 "Cannot write medium - incompatible format") }, 1607 /* DT WRO B */ 1608 { SST(0x30, 0x06, SS_RDEF, 1609 "Cannot format medium - incompatible medium") }, 1610 /* DTL WROMAEBKVF */ 1611 { SST(0x30, 0x07, SS_RDEF, 1612 "Cleaning failure") }, 1613 /* R */ 1614 { SST(0x30, 0x08, SS_RDEF, 1615 "Cannot write - application code mismatch") }, 1616 /* R */ 1617 { SST(0x30, 0x09, SS_RDEF, 1618 "Current session not fixated for append") }, 1619 /* DT WRO AEBK */ 1620 { SST(0x30, 0x0A, SS_RDEF, /* XXX TBD */ 1621 "Cleaning request rejected") }, 1622 /* T */ 1623 { SST(0x30, 0x0C, SS_RDEF, /* XXX TBD */ 1624 "WORM medium - overwrite attempted") }, 1625 /* T */ 1626 { SST(0x30, 0x0D, SS_RDEF, /* XXX TBD */ 1627 "WORM medium - integrity check") }, 1628 /* R */ 1629 { SST(0x30, 0x10, SS_RDEF, /* XXX TBD */ 1630 "Medium not formatted") }, 1631 /* M */ 1632 { SST(0x30, 0x11, SS_RDEF, /* XXX TBD */ 1633 "Incompatible volume type") }, 1634 /* M */ 1635 { SST(0x30, 0x12, SS_RDEF, /* XXX TBD */ 1636 "Incompatible volume qualifier") }, 1637 /* DT WRO BK */ 1638 { SST(0x31, 0x00, SS_RDEF, 1639 "Medium format corrupted") }, 1640 /* D L RO B */ 1641 { SST(0x31, 0x01, SS_RDEF, 1642 "Format command failed") }, 1643 /* R */ 1644 { SST(0x31, 0x02, SS_RDEF, /* XXX TBD */ 1645 "Zoned formatting failed due to spare linking") }, 1646 /* D W O BK */ 1647 { SST(0x32, 0x00, SS_RDEF, 1648 "No defect spare location available") }, 1649 /* D W O BK */ 1650 { SST(0x32, 0x01, SS_RDEF, 1651 "Defect list update failure") }, 1652 /* T */ 1653 { SST(0x33, 0x00, SS_RDEF, 1654 "Tape length error") }, 1655 /* DTLPWROMAEBKVF */ 1656 { SST(0x34, 0x00, SS_RDEF, 1657 "Enclosure failure") }, 1658 /* DTLPWROMAEBKVF */ 1659 { SST(0x35, 0x00, SS_RDEF, 1660 "Enclosure services failure") }, 1661 /* DTLPWROMAEBKVF */ 1662 { SST(0x35, 0x01, SS_RDEF, 1663 "Unsupported enclosure function") }, 1664 /* DTLPWROMAEBKVF */ 1665 { SST(0x35, 0x02, SS_RDEF, 1666 "Enclosure services unavailable") }, 1667 /* DTLPWROMAEBKVF */ 1668 { SST(0x35, 0x03, SS_RDEF, 1669 "Enclosure services transfer failure") }, 1670 /* DTLPWROMAEBKVF */ 1671 { SST(0x35, 0x04, SS_RDEF, 1672 "Enclosure services transfer refused") }, 1673 /* DTL WROMAEBKVF */ 1674 { SST(0x35, 0x05, SS_RDEF, /* XXX TBD */ 1675 "Enclosure services checksum error") }, 1676 /* L */ 1677 { SST(0x36, 0x00, SS_RDEF, 1678 "Ribbon, ink, or toner failure") }, 1679 /* DTL WROMAEBKVF */ 1680 { SST(0x37, 0x00, SS_RDEF, 1681 "Rounded parameter") }, 1682 /* B */ 1683 { SST(0x38, 0x00, SS_RDEF, /* XXX TBD */ 1684 "Event status notification") }, 1685 /* B */ 1686 { SST(0x38, 0x02, SS_RDEF, /* XXX TBD */ 1687 "ESN - power management class event") }, 1688 /* B */ 1689 { SST(0x38, 0x04, SS_RDEF, /* XXX TBD */ 1690 "ESN - media class event") }, 1691 /* B */ 1692 { SST(0x38, 0x06, SS_RDEF, /* XXX TBD */ 1693 "ESN - device busy class event") }, 1694 /* DTL WROMAE K */ 1695 { SST(0x39, 0x00, SS_RDEF, 1696 "Saving parameters not supported") }, 1697 /* DTL WROM BK */ 1698 { SST(0x3A, 0x00, SS_FATAL | ENXIO, 1699 "Medium not present") }, 1700 /* DT WROM BK */ 1701 { SST(0x3A, 0x01, SS_FATAL | ENXIO, 1702 "Medium not present - tray closed") }, 1703 /* DT WROM BK */ 1704 { SST(0x3A, 0x02, SS_FATAL | ENXIO, 1705 "Medium not present - tray open") }, 1706 /* DT WROM B */ 1707 { SST(0x3A, 0x03, SS_RDEF, /* XXX TBD */ 1708 "Medium not present - loadable") }, 1709 /* DT WRO B */ 1710 { SST(0x3A, 0x04, SS_RDEF, /* XXX TBD */ 1711 "Medium not present - medium auxiliary memory accessible") }, 1712 /* TL */ 1713 { SST(0x3B, 0x00, SS_RDEF, 1714 "Sequential positioning error") }, 1715 /* T */ 1716 { SST(0x3B, 0x01, SS_RDEF, 1717 "Tape position error at beginning-of-medium") }, 1718 /* T */ 1719 { SST(0x3B, 0x02, SS_RDEF, 1720 "Tape position error at end-of-medium") }, 1721 /* L */ 1722 { SST(0x3B, 0x03, SS_RDEF, 1723 "Tape or electronic vertical forms unit not ready") }, 1724 /* L */ 1725 { SST(0x3B, 0x04, SS_RDEF, 1726 "Slew failure") }, 1727 /* L */ 1728 { SST(0x3B, 0x05, SS_RDEF, 1729 "Paper jam") }, 1730 /* L */ 1731 { SST(0x3B, 0x06, SS_RDEF, 1732 "Failed to sense top-of-form") }, 1733 /* L */ 1734 { SST(0x3B, 0x07, SS_RDEF, 1735 "Failed to sense bottom-of-form") }, 1736 /* T */ 1737 { SST(0x3B, 0x08, SS_RDEF, 1738 "Reposition error") }, 1739 /* */ 1740 { SST(0x3B, 0x09, SS_RDEF, 1741 "Read past end of medium") }, 1742 /* */ 1743 { SST(0x3B, 0x0A, SS_RDEF, 1744 "Read past beginning of medium") }, 1745 /* */ 1746 { SST(0x3B, 0x0B, SS_RDEF, 1747 "Position past end of medium") }, 1748 /* T */ 1749 { SST(0x3B, 0x0C, SS_RDEF, 1750 "Position past beginning of medium") }, 1751 /* DT WROM BK */ 1752 { SST(0x3B, 0x0D, SS_FATAL | ENOSPC, 1753 "Medium destination element full") }, 1754 /* DT WROM BK */ 1755 { SST(0x3B, 0x0E, SS_RDEF, 1756 "Medium source element empty") }, 1757 /* R */ 1758 { SST(0x3B, 0x0F, SS_RDEF, 1759 "End of medium reached") }, 1760 /* DT WROM BK */ 1761 { SST(0x3B, 0x11, SS_RDEF, 1762 "Medium magazine not accessible") }, 1763 /* DT WROM BK */ 1764 { SST(0x3B, 0x12, SS_RDEF, 1765 "Medium magazine removed") }, 1766 /* DT WROM BK */ 1767 { SST(0x3B, 0x13, SS_RDEF, 1768 "Medium magazine inserted") }, 1769 /* DT WROM BK */ 1770 { SST(0x3B, 0x14, SS_RDEF, 1771 "Medium magazine locked") }, 1772 /* DT WROM BK */ 1773 { SST(0x3B, 0x15, SS_RDEF, 1774 "Medium magazine unlocked") }, 1775 /* R */ 1776 { SST(0x3B, 0x16, SS_RDEF, /* XXX TBD */ 1777 "Mechanical positioning or changer error") }, 1778 /* F */ 1779 { SST(0x3B, 0x17, SS_RDEF, /* XXX TBD */ 1780 "Read past end of user object") }, 1781 /* M */ 1782 { SST(0x3B, 0x18, SS_RDEF, /* XXX TBD */ 1783 "Element disabled") }, 1784 /* M */ 1785 { SST(0x3B, 0x19, SS_RDEF, /* XXX TBD */ 1786 "Element enabled") }, 1787 /* M */ 1788 { SST(0x3B, 0x1A, SS_RDEF, /* XXX TBD */ 1789 "Data transfer device removed") }, 1790 /* M */ 1791 { SST(0x3B, 0x1B, SS_RDEF, /* XXX TBD */ 1792 "Data transfer device inserted") }, 1793 /* DTLPWROMAE K */ 1794 { SST(0x3D, 0x00, SS_RDEF, 1795 "Invalid bits in IDENTIFY message") }, 1796 /* DTLPWROMAEBKVF */ 1797 { SST(0x3E, 0x00, SS_RDEF, 1798 "Logical unit has not self-configured yet") }, 1799 /* DTLPWROMAEBKVF */ 1800 { SST(0x3E, 0x01, SS_RDEF, 1801 "Logical unit failure") }, 1802 /* DTLPWROMAEBKVF */ 1803 { SST(0x3E, 0x02, SS_RDEF, 1804 "Timeout on logical unit") }, 1805 /* DTLPWROMAEBKVF */ 1806 { SST(0x3E, 0x03, SS_RDEF, /* XXX TBD */ 1807 "Logical unit failed self-test") }, 1808 /* DTLPWROMAEBKVF */ 1809 { SST(0x3E, 0x04, SS_RDEF, /* XXX TBD */ 1810 "Logical unit unable to update self-test log") }, 1811 /* DTLPWROMAEBKVF */ 1812 { SST(0x3F, 0x00, SS_RDEF, 1813 "Target operating conditions have changed") }, 1814 /* DTLPWROMAEBKVF */ 1815 { SST(0x3F, 0x01, SS_RDEF, 1816 "Microcode has been changed") }, 1817 /* DTLPWROM BK */ 1818 { SST(0x3F, 0x02, SS_RDEF, 1819 "Changed operating definition") }, 1820 /* DTLPWROMAEBKVF */ 1821 { SST(0x3F, 0x03, SS_RDEF, 1822 "INQUIRY data has changed") }, 1823 /* DT WROMAEBK */ 1824 { SST(0x3F, 0x04, SS_RDEF, 1825 "Component device attached") }, 1826 /* DT WROMAEBK */ 1827 { SST(0x3F, 0x05, SS_RDEF, 1828 "Device identifier changed") }, 1829 /* DT WROMAEB */ 1830 { SST(0x3F, 0x06, SS_RDEF, 1831 "Redundancy group created or modified") }, 1832 /* DT WROMAEB */ 1833 { SST(0x3F, 0x07, SS_RDEF, 1834 "Redundancy group deleted") }, 1835 /* DT WROMAEB */ 1836 { SST(0x3F, 0x08, SS_RDEF, 1837 "Spare created or modified") }, 1838 /* DT WROMAEB */ 1839 { SST(0x3F, 0x09, SS_RDEF, 1840 "Spare deleted") }, 1841 /* DT WROMAEBK */ 1842 { SST(0x3F, 0x0A, SS_RDEF, 1843 "Volume set created or modified") }, 1844 /* DT WROMAEBK */ 1845 { SST(0x3F, 0x0B, SS_RDEF, 1846 "Volume set deleted") }, 1847 /* DT WROMAEBK */ 1848 { SST(0x3F, 0x0C, SS_RDEF, 1849 "Volume set deassigned") }, 1850 /* DT WROMAEBK */ 1851 { SST(0x3F, 0x0D, SS_RDEF, 1852 "Volume set reassigned") }, 1853 /* DTLPWROMAE */ 1854 { SST(0x3F, 0x0E, SS_RDEF, /* XXX TBD */ 1855 "Reported LUNs data has changed") }, 1856 /* DTLPWROMAEBKVF */ 1857 { SST(0x3F, 0x0F, SS_RDEF, /* XXX TBD */ 1858 "Echo buffer overwritten") }, 1859 /* DT WROM B */ 1860 { SST(0x3F, 0x10, SS_RDEF, /* XXX TBD */ 1861 "Medium loadable") }, 1862 /* DT WROM B */ 1863 { SST(0x3F, 0x11, SS_RDEF, /* XXX TBD */ 1864 "Medium auxiliary memory accessible") }, 1865 /* DTLPWR MAEBK F */ 1866 { SST(0x3F, 0x12, SS_RDEF, /* XXX TBD */ 1867 "iSCSI IP address added") }, 1868 /* DTLPWR MAEBK F */ 1869 { SST(0x3F, 0x13, SS_RDEF, /* XXX TBD */ 1870 "iSCSI IP address removed") }, 1871 /* DTLPWR MAEBK F */ 1872 { SST(0x3F, 0x14, SS_RDEF, /* XXX TBD */ 1873 "iSCSI IP address changed") }, 1874 /* D */ 1875 { SST(0x40, 0x00, SS_RDEF, 1876 "RAM failure") }, /* deprecated - use 40 NN instead */ 1877 /* DTLPWROMAEBKVF */ 1878 { SST(0x40, 0x80, SS_RDEF, 1879 "Diagnostic failure: ASCQ = Component ID") }, 1880 /* DTLPWROMAEBKVF */ 1881 { SST(0x40, 0xFF, SS_RDEF | SSQ_RANGE, 1882 NULL) }, /* Range 0x80->0xFF */ 1883 /* D */ 1884 { SST(0x41, 0x00, SS_RDEF, 1885 "Data path failure") }, /* deprecated - use 40 NN instead */ 1886 /* D */ 1887 { SST(0x42, 0x00, SS_RDEF, 1888 "Power-on or self-test failure") }, 1889 /* deprecated - use 40 NN instead */ 1890 /* DTLPWROMAEBKVF */ 1891 { SST(0x43, 0x00, SS_RDEF, 1892 "Message error") }, 1893 /* DTLPWROMAEBKVF */ 1894 { SST(0x44, 0x00, SS_RDEF, 1895 "Internal target failure") }, 1896 /* DT B */ 1897 { SST(0x44, 0x71, SS_RDEF, /* XXX TBD */ 1898 "ATA device failed set features") }, 1899 /* DTLPWROMAEBKVF */ 1900 { SST(0x45, 0x00, SS_RDEF, 1901 "Select or reselect failure") }, 1902 /* DTLPWROM BK */ 1903 { SST(0x46, 0x00, SS_RDEF, 1904 "Unsuccessful soft reset") }, 1905 /* DTLPWROMAEBKVF */ 1906 { SST(0x47, 0x00, SS_RDEF, 1907 "SCSI parity error") }, 1908 /* DTLPWROMAEBKVF */ 1909 { SST(0x47, 0x01, SS_RDEF, /* XXX TBD */ 1910 "Data phase CRC error detected") }, 1911 /* DTLPWROMAEBKVF */ 1912 { SST(0x47, 0x02, SS_RDEF, /* XXX TBD */ 1913 "SCSI parity error detected during ST data phase") }, 1914 /* DTLPWROMAEBKVF */ 1915 { SST(0x47, 0x03, SS_RDEF, /* XXX TBD */ 1916 "Information unit iuCRC error detected") }, 1917 /* DTLPWROMAEBKVF */ 1918 { SST(0x47, 0x04, SS_RDEF, /* XXX TBD */ 1919 "Asynchronous information protection error detected") }, 1920 /* DTLPWROMAEBKVF */ 1921 { SST(0x47, 0x05, SS_RDEF, /* XXX TBD */ 1922 "Protocol service CRC error") }, 1923 /* DT MAEBKVF */ 1924 { SST(0x47, 0x06, SS_RDEF, /* XXX TBD */ 1925 "PHY test function in progress") }, 1926 /* DT PWROMAEBK */ 1927 { SST(0x47, 0x7F, SS_RDEF, /* XXX TBD */ 1928 "Some commands cleared by iSCSI protocol event") }, 1929 /* DTLPWROMAEBKVF */ 1930 { SST(0x48, 0x00, SS_RDEF, 1931 "Initiator detected error message received") }, 1932 /* DTLPWROMAEBKVF */ 1933 { SST(0x49, 0x00, SS_RDEF, 1934 "Invalid message error") }, 1935 /* DTLPWROMAEBKVF */ 1936 { SST(0x4A, 0x00, SS_RDEF, 1937 "Command phase error") }, 1938 /* DTLPWROMAEBKVF */ 1939 { SST(0x4B, 0x00, SS_RDEF, 1940 "Data phase error") }, 1941 /* DT PWROMAEBK */ 1942 { SST(0x4B, 0x01, SS_RDEF, /* XXX TBD */ 1943 "Invalid target port transfer tag received") }, 1944 /* DT PWROMAEBK */ 1945 { SST(0x4B, 0x02, SS_RDEF, /* XXX TBD */ 1946 "Too much write data") }, 1947 /* DT PWROMAEBK */ 1948 { SST(0x4B, 0x03, SS_RDEF, /* XXX TBD */ 1949 "ACK/NAK timeout") }, 1950 /* DT PWROMAEBK */ 1951 { SST(0x4B, 0x04, SS_RDEF, /* XXX TBD */ 1952 "NAK received") }, 1953 /* DT PWROMAEBK */ 1954 { SST(0x4B, 0x05, SS_RDEF, /* XXX TBD */ 1955 "Data offset error") }, 1956 /* DT PWROMAEBK */ 1957 { SST(0x4B, 0x06, SS_RDEF, /* XXX TBD */ 1958 "Initiator response timeout") }, 1959 /* DTLPWROMAEBKVF */ 1960 { SST(0x4C, 0x00, SS_RDEF, 1961 "Logical unit failed self-configuration") }, 1962 /* DTLPWROMAEBKVF */ 1963 { SST(0x4D, 0x00, SS_RDEF, 1964 "Tagged overlapped commands: ASCQ = Queue tag ID") }, 1965 /* DTLPWROMAEBKVF */ 1966 { SST(0x4D, 0xFF, SS_RDEF | SSQ_RANGE, 1967 NULL) }, /* Range 0x00->0xFF */ 1968 /* DTLPWROMAEBKVF */ 1969 { SST(0x4E, 0x00, SS_RDEF, 1970 "Overlapped commands attempted") }, 1971 /* T */ 1972 { SST(0x50, 0x00, SS_RDEF, 1973 "Write append error") }, 1974 /* T */ 1975 { SST(0x50, 0x01, SS_RDEF, 1976 "Write append position error") }, 1977 /* T */ 1978 { SST(0x50, 0x02, SS_RDEF, 1979 "Position error related to timing") }, 1980 /* T RO */ 1981 { SST(0x51, 0x00, SS_RDEF, 1982 "Erase failure") }, 1983 /* R */ 1984 { SST(0x51, 0x01, SS_RDEF, /* XXX TBD */ 1985 "Erase failure - incomplete erase operation detected") }, 1986 /* T */ 1987 { SST(0x52, 0x00, SS_RDEF, 1988 "Cartridge fault") }, 1989 /* DTL WROM BK */ 1990 { SST(0x53, 0x00, SS_RDEF, 1991 "Media load or eject failed") }, 1992 /* T */ 1993 { SST(0x53, 0x01, SS_RDEF, 1994 "Unload tape failure") }, 1995 /* DT WROM BK */ 1996 { SST(0x53, 0x02, SS_RDEF, 1997 "Medium removal prevented") }, 1998 /* M */ 1999 { SST(0x53, 0x03, SS_RDEF, /* XXX TBD */ 2000 "Medium removal prevented by data transfer element") }, 2001 /* T */ 2002 { SST(0x53, 0x04, SS_RDEF, /* XXX TBD */ 2003 "Medium thread or unthread failure") }, 2004 /* P */ 2005 { SST(0x54, 0x00, SS_RDEF, 2006 "SCSI to host system interface failure") }, 2007 /* P */ 2008 { SST(0x55, 0x00, SS_RDEF, 2009 "System resource failure") }, 2010 /* D O BK */ 2011 { SST(0x55, 0x01, SS_FATAL | ENOSPC, 2012 "System buffer full") }, 2013 /* DTLPWROMAE K */ 2014 { SST(0x55, 0x02, SS_RDEF, /* XXX TBD */ 2015 "Insufficient reservation resources") }, 2016 /* DTLPWROMAE K */ 2017 { SST(0x55, 0x03, SS_RDEF, /* XXX TBD */ 2018 "Insufficient resources") }, 2019 /* DTLPWROMAE K */ 2020 { SST(0x55, 0x04, SS_RDEF, /* XXX TBD */ 2021 "Insufficient registration resources") }, 2022 /* DT PWROMAEBK */ 2023 { SST(0x55, 0x05, SS_RDEF, /* XXX TBD */ 2024 "Insufficient access control resources") }, 2025 /* DT WROM B */ 2026 { SST(0x55, 0x06, SS_RDEF, /* XXX TBD */ 2027 "Auxiliary memory out of space") }, 2028 /* F */ 2029 { SST(0x55, 0x07, SS_RDEF, /* XXX TBD */ 2030 "Quota error") }, 2031 /* T */ 2032 { SST(0x55, 0x08, SS_RDEF, /* XXX TBD */ 2033 "Maximum number of supplemental decryption keys exceeded") }, 2034 /* M */ 2035 { SST(0x55, 0x09, SS_RDEF, /* XXX TBD */ 2036 "Medium auxiliary memory not accessible") }, 2037 /* M */ 2038 { SST(0x55, 0x0A, SS_RDEF, /* XXX TBD */ 2039 "Data currently unavailable") }, 2040 /* R */ 2041 { SST(0x57, 0x00, SS_RDEF, 2042 "Unable to recover table-of-contents") }, 2043 /* O */ 2044 { SST(0x58, 0x00, SS_RDEF, 2045 "Generation does not exist") }, 2046 /* O */ 2047 { SST(0x59, 0x00, SS_RDEF, 2048 "Updated block read") }, 2049 /* DTLPWRO BK */ 2050 { SST(0x5A, 0x00, SS_RDEF, 2051 "Operator request or state change input") }, 2052 /* DT WROM BK */ 2053 { SST(0x5A, 0x01, SS_RDEF, 2054 "Operator medium removal request") }, 2055 /* DT WRO A BK */ 2056 { SST(0x5A, 0x02, SS_RDEF, 2057 "Operator selected write protect") }, 2058 /* DT WRO A BK */ 2059 { SST(0x5A, 0x03, SS_RDEF, 2060 "Operator selected write permit") }, 2061 /* DTLPWROM K */ 2062 { SST(0x5B, 0x00, SS_RDEF, 2063 "Log exception") }, 2064 /* DTLPWROM K */ 2065 { SST(0x5B, 0x01, SS_RDEF, 2066 "Threshold condition met") }, 2067 /* DTLPWROM K */ 2068 { SST(0x5B, 0x02, SS_RDEF, 2069 "Log counter at maximum") }, 2070 /* DTLPWROM K */ 2071 { SST(0x5B, 0x03, SS_RDEF, 2072 "Log list codes exhausted") }, 2073 /* D O */ 2074 { SST(0x5C, 0x00, SS_RDEF, 2075 "RPL status change") }, 2076 /* D O */ 2077 { SST(0x5C, 0x01, SS_NOP | SSQ_PRINT_SENSE, 2078 "Spindles synchronized") }, 2079 /* D O */ 2080 { SST(0x5C, 0x02, SS_RDEF, 2081 "Spindles not synchronized") }, 2082 /* DTLPWROMAEBKVF */ 2083 { SST(0x5D, 0x00, SS_RDEF, 2084 "Failure prediction threshold exceeded") }, 2085 /* R B */ 2086 { SST(0x5D, 0x01, SS_RDEF, /* XXX TBD */ 2087 "Media failure prediction threshold exceeded") }, 2088 /* R */ 2089 { SST(0x5D, 0x02, SS_RDEF, /* XXX TBD */ 2090 "Logical unit failure prediction threshold exceeded") }, 2091 /* R */ 2092 { SST(0x5D, 0x03, SS_RDEF, /* XXX TBD */ 2093 "Spare area exhaustion prediction threshold exceeded") }, 2094 /* D B */ 2095 { SST(0x5D, 0x10, SS_RDEF, /* XXX TBD */ 2096 "Hardware impending failure general hard drive failure") }, 2097 /* D B */ 2098 { SST(0x5D, 0x11, SS_RDEF, /* XXX TBD */ 2099 "Hardware impending failure drive error rate too high") }, 2100 /* D B */ 2101 { SST(0x5D, 0x12, SS_RDEF, /* XXX TBD */ 2102 "Hardware impending failure data error rate too high") }, 2103 /* D B */ 2104 { SST(0x5D, 0x13, SS_RDEF, /* XXX TBD */ 2105 "Hardware impending failure seek error rate too high") }, 2106 /* D B */ 2107 { SST(0x5D, 0x14, SS_RDEF, /* XXX TBD */ 2108 "Hardware impending failure too many block reassigns") }, 2109 /* D B */ 2110 { SST(0x5D, 0x15, SS_RDEF, /* XXX TBD */ 2111 "Hardware impending failure access times too high") }, 2112 /* D B */ 2113 { SST(0x5D, 0x16, SS_RDEF, /* XXX TBD */ 2114 "Hardware impending failure start unit times too high") }, 2115 /* D B */ 2116 { SST(0x5D, 0x17, SS_RDEF, /* XXX TBD */ 2117 "Hardware impending failure channel parametrics") }, 2118 /* D B */ 2119 { SST(0x5D, 0x18, SS_RDEF, /* XXX TBD */ 2120 "Hardware impending failure controller detected") }, 2121 /* D B */ 2122 { SST(0x5D, 0x19, SS_RDEF, /* XXX TBD */ 2123 "Hardware impending failure throughput performance") }, 2124 /* D B */ 2125 { SST(0x5D, 0x1A, SS_RDEF, /* XXX TBD */ 2126 "Hardware impending failure seek time performance") }, 2127 /* D B */ 2128 { SST(0x5D, 0x1B, SS_RDEF, /* XXX TBD */ 2129 "Hardware impending failure spin-up retry count") }, 2130 /* D B */ 2131 { SST(0x5D, 0x1C, SS_RDEF, /* XXX TBD */ 2132 "Hardware impending failure drive calibration retry count") }, 2133 /* D B */ 2134 { SST(0x5D, 0x20, SS_RDEF, /* XXX TBD */ 2135 "Controller impending failure general hard drive failure") }, 2136 /* D B */ 2137 { SST(0x5D, 0x21, SS_RDEF, /* XXX TBD */ 2138 "Controller impending failure drive error rate too high") }, 2139 /* D B */ 2140 { SST(0x5D, 0x22, SS_RDEF, /* XXX TBD */ 2141 "Controller impending failure data error rate too high") }, 2142 /* D B */ 2143 { SST(0x5D, 0x23, SS_RDEF, /* XXX TBD */ 2144 "Controller impending failure seek error rate too high") }, 2145 /* D B */ 2146 { SST(0x5D, 0x24, SS_RDEF, /* XXX TBD */ 2147 "Controller impending failure too many block reassigns") }, 2148 /* D B */ 2149 { SST(0x5D, 0x25, SS_RDEF, /* XXX TBD */ 2150 "Controller impending failure access times too high") }, 2151 /* D B */ 2152 { SST(0x5D, 0x26, SS_RDEF, /* XXX TBD */ 2153 "Controller impending failure start unit times too high") }, 2154 /* D B */ 2155 { SST(0x5D, 0x27, SS_RDEF, /* XXX TBD */ 2156 "Controller impending failure channel parametrics") }, 2157 /* D B */ 2158 { SST(0x5D, 0x28, SS_RDEF, /* XXX TBD */ 2159 "Controller impending failure controller detected") }, 2160 /* D B */ 2161 { SST(0x5D, 0x29, SS_RDEF, /* XXX TBD */ 2162 "Controller impending failure throughput performance") }, 2163 /* D B */ 2164 { SST(0x5D, 0x2A, SS_RDEF, /* XXX TBD */ 2165 "Controller impending failure seek time performance") }, 2166 /* D B */ 2167 { SST(0x5D, 0x2B, SS_RDEF, /* XXX TBD */ 2168 "Controller impending failure spin-up retry count") }, 2169 /* D B */ 2170 { SST(0x5D, 0x2C, SS_RDEF, /* XXX TBD */ 2171 "Controller impending failure drive calibration retry count") }, 2172 /* D B */ 2173 { SST(0x5D, 0x30, SS_RDEF, /* XXX TBD */ 2174 "Data channel impending failure general hard drive failure") }, 2175 /* D B */ 2176 { SST(0x5D, 0x31, SS_RDEF, /* XXX TBD */ 2177 "Data channel impending failure drive error rate too high") }, 2178 /* D B */ 2179 { SST(0x5D, 0x32, SS_RDEF, /* XXX TBD */ 2180 "Data channel impending failure data error rate too high") }, 2181 /* D B */ 2182 { SST(0x5D, 0x33, SS_RDEF, /* XXX TBD */ 2183 "Data channel impending failure seek error rate too high") }, 2184 /* D B */ 2185 { SST(0x5D, 0x34, SS_RDEF, /* XXX TBD */ 2186 "Data channel impending failure too many block reassigns") }, 2187 /* D B */ 2188 { SST(0x5D, 0x35, SS_RDEF, /* XXX TBD */ 2189 "Data channel impending failure access times too high") }, 2190 /* D B */ 2191 { SST(0x5D, 0x36, SS_RDEF, /* XXX TBD */ 2192 "Data channel impending failure start unit times too high") }, 2193 /* D B */ 2194 { SST(0x5D, 0x37, SS_RDEF, /* XXX TBD */ 2195 "Data channel impending failure channel parametrics") }, 2196 /* D B */ 2197 { SST(0x5D, 0x38, SS_RDEF, /* XXX TBD */ 2198 "Data channel impending failure controller detected") }, 2199 /* D B */ 2200 { SST(0x5D, 0x39, SS_RDEF, /* XXX TBD */ 2201 "Data channel impending failure throughput performance") }, 2202 /* D B */ 2203 { SST(0x5D, 0x3A, SS_RDEF, /* XXX TBD */ 2204 "Data channel impending failure seek time performance") }, 2205 /* D B */ 2206 { SST(0x5D, 0x3B, SS_RDEF, /* XXX TBD */ 2207 "Data channel impending failure spin-up retry count") }, 2208 /* D B */ 2209 { SST(0x5D, 0x3C, SS_RDEF, /* XXX TBD */ 2210 "Data channel impending failure drive calibration retry count") }, 2211 /* D B */ 2212 { SST(0x5D, 0x40, SS_RDEF, /* XXX TBD */ 2213 "Servo impending failure general hard drive failure") }, 2214 /* D B */ 2215 { SST(0x5D, 0x41, SS_RDEF, /* XXX TBD */ 2216 "Servo impending failure drive error rate too high") }, 2217 /* D B */ 2218 { SST(0x5D, 0x42, SS_RDEF, /* XXX TBD */ 2219 "Servo impending failure data error rate too high") }, 2220 /* D B */ 2221 { SST(0x5D, 0x43, SS_RDEF, /* XXX TBD */ 2222 "Servo impending failure seek error rate too high") }, 2223 /* D B */ 2224 { SST(0x5D, 0x44, SS_RDEF, /* XXX TBD */ 2225 "Servo impending failure too many block reassigns") }, 2226 /* D B */ 2227 { SST(0x5D, 0x45, SS_RDEF, /* XXX TBD */ 2228 "Servo impending failure access times too high") }, 2229 /* D B */ 2230 { SST(0x5D, 0x46, SS_RDEF, /* XXX TBD */ 2231 "Servo impending failure start unit times too high") }, 2232 /* D B */ 2233 { SST(0x5D, 0x47, SS_RDEF, /* XXX TBD */ 2234 "Servo impending failure channel parametrics") }, 2235 /* D B */ 2236 { SST(0x5D, 0x48, SS_RDEF, /* XXX TBD */ 2237 "Servo impending failure controller detected") }, 2238 /* D B */ 2239 { SST(0x5D, 0x49, SS_RDEF, /* XXX TBD */ 2240 "Servo impending failure throughput performance") }, 2241 /* D B */ 2242 { SST(0x5D, 0x4A, SS_RDEF, /* XXX TBD */ 2243 "Servo impending failure seek time performance") }, 2244 /* D B */ 2245 { SST(0x5D, 0x4B, SS_RDEF, /* XXX TBD */ 2246 "Servo impending failure spin-up retry count") }, 2247 /* D B */ 2248 { SST(0x5D, 0x4C, SS_RDEF, /* XXX TBD */ 2249 "Servo impending failure drive calibration retry count") }, 2250 /* D B */ 2251 { SST(0x5D, 0x50, SS_RDEF, /* XXX TBD */ 2252 "Spindle impending failure general hard drive failure") }, 2253 /* D B */ 2254 { SST(0x5D, 0x51, SS_RDEF, /* XXX TBD */ 2255 "Spindle impending failure drive error rate too high") }, 2256 /* D B */ 2257 { SST(0x5D, 0x52, SS_RDEF, /* XXX TBD */ 2258 "Spindle impending failure data error rate too high") }, 2259 /* D B */ 2260 { SST(0x5D, 0x53, SS_RDEF, /* XXX TBD */ 2261 "Spindle impending failure seek error rate too high") }, 2262 /* D B */ 2263 { SST(0x5D, 0x54, SS_RDEF, /* XXX TBD */ 2264 "Spindle impending failure too many block reassigns") }, 2265 /* D B */ 2266 { SST(0x5D, 0x55, SS_RDEF, /* XXX TBD */ 2267 "Spindle impending failure access times too high") }, 2268 /* D B */ 2269 { SST(0x5D, 0x56, SS_RDEF, /* XXX TBD */ 2270 "Spindle impending failure start unit times too high") }, 2271 /* D B */ 2272 { SST(0x5D, 0x57, SS_RDEF, /* XXX TBD */ 2273 "Spindle impending failure channel parametrics") }, 2274 /* D B */ 2275 { SST(0x5D, 0x58, SS_RDEF, /* XXX TBD */ 2276 "Spindle impending failure controller detected") }, 2277 /* D B */ 2278 { SST(0x5D, 0x59, SS_RDEF, /* XXX TBD */ 2279 "Spindle impending failure throughput performance") }, 2280 /* D B */ 2281 { SST(0x5D, 0x5A, SS_RDEF, /* XXX TBD */ 2282 "Spindle impending failure seek time performance") }, 2283 /* D B */ 2284 { SST(0x5D, 0x5B, SS_RDEF, /* XXX TBD */ 2285 "Spindle impending failure spin-up retry count") }, 2286 /* D B */ 2287 { SST(0x5D, 0x5C, SS_RDEF, /* XXX TBD */ 2288 "Spindle impending failure drive calibration retry count") }, 2289 /* D B */ 2290 { SST(0x5D, 0x60, SS_RDEF, /* XXX TBD */ 2291 "Firmware impending failure general hard drive failure") }, 2292 /* D B */ 2293 { SST(0x5D, 0x61, SS_RDEF, /* XXX TBD */ 2294 "Firmware impending failure drive error rate too high") }, 2295 /* D B */ 2296 { SST(0x5D, 0x62, SS_RDEF, /* XXX TBD */ 2297 "Firmware impending failure data error rate too high") }, 2298 /* D B */ 2299 { SST(0x5D, 0x63, SS_RDEF, /* XXX TBD */ 2300 "Firmware impending failure seek error rate too high") }, 2301 /* D B */ 2302 { SST(0x5D, 0x64, SS_RDEF, /* XXX TBD */ 2303 "Firmware impending failure too many block reassigns") }, 2304 /* D B */ 2305 { SST(0x5D, 0x65, SS_RDEF, /* XXX TBD */ 2306 "Firmware impending failure access times too high") }, 2307 /* D B */ 2308 { SST(0x5D, 0x66, SS_RDEF, /* XXX TBD */ 2309 "Firmware impending failure start unit times too high") }, 2310 /* D B */ 2311 { SST(0x5D, 0x67, SS_RDEF, /* XXX TBD */ 2312 "Firmware impending failure channel parametrics") }, 2313 /* D B */ 2314 { SST(0x5D, 0x68, SS_RDEF, /* XXX TBD */ 2315 "Firmware impending failure controller detected") }, 2316 /* D B */ 2317 { SST(0x5D, 0x69, SS_RDEF, /* XXX TBD */ 2318 "Firmware impending failure throughput performance") }, 2319 /* D B */ 2320 { SST(0x5D, 0x6A, SS_RDEF, /* XXX TBD */ 2321 "Firmware impending failure seek time performance") }, 2322 /* D B */ 2323 { SST(0x5D, 0x6B, SS_RDEF, /* XXX TBD */ 2324 "Firmware impending failure spin-up retry count") }, 2325 /* D B */ 2326 { SST(0x5D, 0x6C, SS_RDEF, /* XXX TBD */ 2327 "Firmware impending failure drive calibration retry count") }, 2328 /* DTLPWROMAEBKVF */ 2329 { SST(0x5D, 0xFF, SS_RDEF, 2330 "Failure prediction threshold exceeded (false)") }, 2331 /* DTLPWRO A K */ 2332 { SST(0x5E, 0x00, SS_RDEF, 2333 "Low power condition on") }, 2334 /* DTLPWRO A K */ 2335 { SST(0x5E, 0x01, SS_RDEF, 2336 "Idle condition activated by timer") }, 2337 /* DTLPWRO A K */ 2338 { SST(0x5E, 0x02, SS_RDEF, 2339 "Standby condition activated by timer") }, 2340 /* DTLPWRO A K */ 2341 { SST(0x5E, 0x03, SS_RDEF, 2342 "Idle condition activated by command") }, 2343 /* DTLPWRO A K */ 2344 { SST(0x5E, 0x04, SS_RDEF, 2345 "Standby condition activated by command") }, 2346 /* B */ 2347 { SST(0x5E, 0x41, SS_RDEF, /* XXX TBD */ 2348 "Power state change to active") }, 2349 /* B */ 2350 { SST(0x5E, 0x42, SS_RDEF, /* XXX TBD */ 2351 "Power state change to idle") }, 2352 /* B */ 2353 { SST(0x5E, 0x43, SS_RDEF, /* XXX TBD */ 2354 "Power state change to standby") }, 2355 /* B */ 2356 { SST(0x5E, 0x45, SS_RDEF, /* XXX TBD */ 2357 "Power state change to sleep") }, 2358 /* BK */ 2359 { SST(0x5E, 0x47, SS_RDEF, /* XXX TBD */ 2360 "Power state change to device control") }, 2361 /* */ 2362 { SST(0x60, 0x00, SS_RDEF, 2363 "Lamp failure") }, 2364 /* */ 2365 { SST(0x61, 0x00, SS_RDEF, 2366 "Video acquisition error") }, 2367 /* */ 2368 { SST(0x61, 0x01, SS_RDEF, 2369 "Unable to acquire video") }, 2370 /* */ 2371 { SST(0x61, 0x02, SS_RDEF, 2372 "Out of focus") }, 2373 /* */ 2374 { SST(0x62, 0x00, SS_RDEF, 2375 "Scan head positioning error") }, 2376 /* R */ 2377 { SST(0x63, 0x00, SS_RDEF, 2378 "End of user area encountered on this track") }, 2379 /* R */ 2380 { SST(0x63, 0x01, SS_FATAL | ENOSPC, 2381 "Packet does not fit in available space") }, 2382 /* R */ 2383 { SST(0x64, 0x00, SS_FATAL | ENXIO, 2384 "Illegal mode for this track") }, 2385 /* R */ 2386 { SST(0x64, 0x01, SS_RDEF, 2387 "Invalid packet size") }, 2388 /* DTLPWROMAEBKVF */ 2389 { SST(0x65, 0x00, SS_RDEF, 2390 "Voltage fault") }, 2391 /* */ 2392 { SST(0x66, 0x00, SS_RDEF, 2393 "Automatic document feeder cover up") }, 2394 /* */ 2395 { SST(0x66, 0x01, SS_RDEF, 2396 "Automatic document feeder lift up") }, 2397 /* */ 2398 { SST(0x66, 0x02, SS_RDEF, 2399 "Document jam in automatic document feeder") }, 2400 /* */ 2401 { SST(0x66, 0x03, SS_RDEF, 2402 "Document miss feed automatic in document feeder") }, 2403 /* A */ 2404 { SST(0x67, 0x00, SS_RDEF, 2405 "Configuration failure") }, 2406 /* A */ 2407 { SST(0x67, 0x01, SS_RDEF, 2408 "Configuration of incapable logical units failed") }, 2409 /* A */ 2410 { SST(0x67, 0x02, SS_RDEF, 2411 "Add logical unit failed") }, 2412 /* A */ 2413 { SST(0x67, 0x03, SS_RDEF, 2414 "Modification of logical unit failed") }, 2415 /* A */ 2416 { SST(0x67, 0x04, SS_RDEF, 2417 "Exchange of logical unit failed") }, 2418 /* A */ 2419 { SST(0x67, 0x05, SS_RDEF, 2420 "Remove of logical unit failed") }, 2421 /* A */ 2422 { SST(0x67, 0x06, SS_RDEF, 2423 "Attachment of logical unit failed") }, 2424 /* A */ 2425 { SST(0x67, 0x07, SS_RDEF, 2426 "Creation of logical unit failed") }, 2427 /* A */ 2428 { SST(0x67, 0x08, SS_RDEF, /* XXX TBD */ 2429 "Assign failure occurred") }, 2430 /* A */ 2431 { SST(0x67, 0x09, SS_RDEF, /* XXX TBD */ 2432 "Multiply assigned logical unit") }, 2433 /* DTLPWROMAEBKVF */ 2434 { SST(0x67, 0x0A, SS_RDEF, /* XXX TBD */ 2435 "Set target port groups command failed") }, 2436 /* DT B */ 2437 { SST(0x67, 0x0B, SS_RDEF, /* XXX TBD */ 2438 "ATA device feature not enabled") }, 2439 /* A */ 2440 { SST(0x68, 0x00, SS_RDEF, 2441 "Logical unit not configured") }, 2442 /* A */ 2443 { SST(0x69, 0x00, SS_RDEF, 2444 "Data loss on logical unit") }, 2445 /* A */ 2446 { SST(0x69, 0x01, SS_RDEF, 2447 "Multiple logical unit failures") }, 2448 /* A */ 2449 { SST(0x69, 0x02, SS_RDEF, 2450 "Parity/data mismatch") }, 2451 /* A */ 2452 { SST(0x6A, 0x00, SS_RDEF, 2453 "Informational, refer to log") }, 2454 /* A */ 2455 { SST(0x6B, 0x00, SS_RDEF, 2456 "State change has occurred") }, 2457 /* A */ 2458 { SST(0x6B, 0x01, SS_RDEF, 2459 "Redundancy level got better") }, 2460 /* A */ 2461 { SST(0x6B, 0x02, SS_RDEF, 2462 "Redundancy level got worse") }, 2463 /* A */ 2464 { SST(0x6C, 0x00, SS_RDEF, 2465 "Rebuild failure occurred") }, 2466 /* A */ 2467 { SST(0x6D, 0x00, SS_RDEF, 2468 "Recalculate failure occurred") }, 2469 /* A */ 2470 { SST(0x6E, 0x00, SS_RDEF, 2471 "Command to logical unit failed") }, 2472 /* R */ 2473 { SST(0x6F, 0x00, SS_RDEF, /* XXX TBD */ 2474 "Copy protection key exchange failure - authentication failure") }, 2475 /* R */ 2476 { SST(0x6F, 0x01, SS_RDEF, /* XXX TBD */ 2477 "Copy protection key exchange failure - key not present") }, 2478 /* R */ 2479 { SST(0x6F, 0x02, SS_RDEF, /* XXX TBD */ 2480 "Copy protection key exchange failure - key not established") }, 2481 /* R */ 2482 { SST(0x6F, 0x03, SS_RDEF, /* XXX TBD */ 2483 "Read of scrambled sector without authentication") }, 2484 /* R */ 2485 { SST(0x6F, 0x04, SS_RDEF, /* XXX TBD */ 2486 "Media region code is mismatched to logical unit region") }, 2487 /* R */ 2488 { SST(0x6F, 0x05, SS_RDEF, /* XXX TBD */ 2489 "Drive region must be permanent/region reset count error") }, 2490 /* R */ 2491 { SST(0x6F, 0x06, SS_RDEF, /* XXX TBD */ 2492 "Insufficient block count for binding NONCE recording") }, 2493 /* R */ 2494 { SST(0x6F, 0x07, SS_RDEF, /* XXX TBD */ 2495 "Conflict in binding NONCE recording") }, 2496 /* T */ 2497 { SST(0x70, 0x00, SS_RDEF, 2498 "Decompression exception short: ASCQ = Algorithm ID") }, 2499 /* T */ 2500 { SST(0x70, 0xFF, SS_RDEF | SSQ_RANGE, 2501 NULL) }, /* Range 0x00 -> 0xFF */ 2502 /* T */ 2503 { SST(0x71, 0x00, SS_RDEF, 2504 "Decompression exception long: ASCQ = Algorithm ID") }, 2505 /* T */ 2506 { SST(0x71, 0xFF, SS_RDEF | SSQ_RANGE, 2507 NULL) }, /* Range 0x00 -> 0xFF */ 2508 /* R */ 2509 { SST(0x72, 0x00, SS_RDEF, 2510 "Session fixation error") }, 2511 /* R */ 2512 { SST(0x72, 0x01, SS_RDEF, 2513 "Session fixation error writing lead-in") }, 2514 /* R */ 2515 { SST(0x72, 0x02, SS_RDEF, 2516 "Session fixation error writing lead-out") }, 2517 /* R */ 2518 { SST(0x72, 0x03, SS_RDEF, 2519 "Session fixation error - incomplete track in session") }, 2520 /* R */ 2521 { SST(0x72, 0x04, SS_RDEF, 2522 "Empty or partially written reserved track") }, 2523 /* R */ 2524 { SST(0x72, 0x05, SS_RDEF, /* XXX TBD */ 2525 "No more track reservations allowed") }, 2526 /* R */ 2527 { SST(0x72, 0x06, SS_RDEF, /* XXX TBD */ 2528 "RMZ extension is not allowed") }, 2529 /* R */ 2530 { SST(0x72, 0x07, SS_RDEF, /* XXX TBD */ 2531 "No more test zone extensions are allowed") }, 2532 /* R */ 2533 { SST(0x73, 0x00, SS_RDEF, 2534 "CD control error") }, 2535 /* R */ 2536 { SST(0x73, 0x01, SS_RDEF, 2537 "Power calibration area almost full") }, 2538 /* R */ 2539 { SST(0x73, 0x02, SS_FATAL | ENOSPC, 2540 "Power calibration area is full") }, 2541 /* R */ 2542 { SST(0x73, 0x03, SS_RDEF, 2543 "Power calibration area error") }, 2544 /* R */ 2545 { SST(0x73, 0x04, SS_RDEF, 2546 "Program memory area update failure") }, 2547 /* R */ 2548 { SST(0x73, 0x05, SS_RDEF, 2549 "Program memory area is full") }, 2550 /* R */ 2551 { SST(0x73, 0x06, SS_RDEF, /* XXX TBD */ 2552 "RMA/PMA is almost full") }, 2553 /* R */ 2554 { SST(0x73, 0x10, SS_RDEF, /* XXX TBD */ 2555 "Current power calibration area almost full") }, 2556 /* R */ 2557 { SST(0x73, 0x11, SS_RDEF, /* XXX TBD */ 2558 "Current power calibration area is full") }, 2559 /* R */ 2560 { SST(0x73, 0x17, SS_RDEF, /* XXX TBD */ 2561 "RDZ is full") }, 2562 /* T */ 2563 { SST(0x74, 0x00, SS_RDEF, /* XXX TBD */ 2564 "Security error") }, 2565 /* T */ 2566 { SST(0x74, 0x01, SS_RDEF, /* XXX TBD */ 2567 "Unable to decrypt data") }, 2568 /* T */ 2569 { SST(0x74, 0x02, SS_RDEF, /* XXX TBD */ 2570 "Unencrypted data encountered while decrypting") }, 2571 /* T */ 2572 { SST(0x74, 0x03, SS_RDEF, /* XXX TBD */ 2573 "Incorrect data encryption key") }, 2574 /* T */ 2575 { SST(0x74, 0x04, SS_RDEF, /* XXX TBD */ 2576 "Cryptographic integrity validation failed") }, 2577 /* T */ 2578 { SST(0x74, 0x05, SS_RDEF, /* XXX TBD */ 2579 "Error decrypting data") }, 2580 /* T */ 2581 { SST(0x74, 0x06, SS_RDEF, /* XXX TBD */ 2582 "Unknown signature verification key") }, 2583 /* T */ 2584 { SST(0x74, 0x07, SS_RDEF, /* XXX TBD */ 2585 "Encryption parameters not usable") }, 2586 /* DT R M E VF */ 2587 { SST(0x74, 0x08, SS_RDEF, /* XXX TBD */ 2588 "Digital signature validation failure") }, 2589 /* T */ 2590 { SST(0x74, 0x09, SS_RDEF, /* XXX TBD */ 2591 "Encryption mode mismatch on read") }, 2592 /* T */ 2593 { SST(0x74, 0x0A, SS_RDEF, /* XXX TBD */ 2594 "Encrypted block not raw read enabled") }, 2595 /* T */ 2596 { SST(0x74, 0x0B, SS_RDEF, /* XXX TBD */ 2597 "Incorrect encryption parameters") }, 2598 /* DT R MAEBKV */ 2599 { SST(0x74, 0x0C, SS_RDEF, /* XXX TBD */ 2600 "Unable to decrypt parameter list") }, 2601 /* T */ 2602 { SST(0x74, 0x0D, SS_RDEF, /* XXX TBD */ 2603 "Encryption algorithm disabled") }, 2604 /* DT R MAEBKV */ 2605 { SST(0x74, 0x10, SS_RDEF, /* XXX TBD */ 2606 "SA creation parameter value invalid") }, 2607 /* DT R MAEBKV */ 2608 { SST(0x74, 0x11, SS_RDEF, /* XXX TBD */ 2609 "SA creation parameter value rejected") }, 2610 /* DT R MAEBKV */ 2611 { SST(0x74, 0x12, SS_RDEF, /* XXX TBD */ 2612 "Invalid SA usage") }, 2613 /* T */ 2614 { SST(0x74, 0x21, SS_RDEF, /* XXX TBD */ 2615 "Data encryption configuration prevented") }, 2616 /* DT R MAEBKV */ 2617 { SST(0x74, 0x30, SS_RDEF, /* XXX TBD */ 2618 "SA creation parameter not supported") }, 2619 /* DT R MAEBKV */ 2620 { SST(0x74, 0x40, SS_RDEF, /* XXX TBD */ 2621 "Authentication failed") }, 2622 /* V */ 2623 { SST(0x74, 0x61, SS_RDEF, /* XXX TBD */ 2624 "External data encryption key manager access error") }, 2625 /* V */ 2626 { SST(0x74, 0x62, SS_RDEF, /* XXX TBD */ 2627 "External data encryption key manager error") }, 2628 /* V */ 2629 { SST(0x74, 0x63, SS_RDEF, /* XXX TBD */ 2630 "External data encryption key not found") }, 2631 /* V */ 2632 { SST(0x74, 0x64, SS_RDEF, /* XXX TBD */ 2633 "External data encryption request not authorized") }, 2634 /* T */ 2635 { SST(0x74, 0x6E, SS_RDEF, /* XXX TBD */ 2636 "External data encryption control timeout") }, 2637 /* T */ 2638 { SST(0x74, 0x6F, SS_RDEF, /* XXX TBD */ 2639 "External data encryption control error") }, 2640 /* DT R M E V */ 2641 { SST(0x74, 0x71, SS_RDEF, /* XXX TBD */ 2642 "Logical unit access not authorized") }, 2643 /* D */ 2644 { SST(0x74, 0x79, SS_RDEF, /* XXX TBD */ 2645 "Security conflict in translated device") } 2646 }; 2647 2648 const int asc_table_size = sizeof(asc_table)/sizeof(asc_table[0]); 2649 2650 struct asc_key 2651 { 2652 int asc; 2653 int ascq; 2654 }; 2655 2656 static int 2657 ascentrycomp(const void *key, const void *member) 2658 { 2659 int asc; 2660 int ascq; 2661 const struct asc_table_entry *table_entry; 2662 2663 asc = ((const struct asc_key *)key)->asc; 2664 ascq = ((const struct asc_key *)key)->ascq; 2665 table_entry = (const struct asc_table_entry *)member; 2666 2667 if (asc >= table_entry->asc) { 2668 2669 if (asc > table_entry->asc) 2670 return (1); 2671 2672 if (ascq <= table_entry->ascq) { 2673 /* Check for ranges */ 2674 if (ascq == table_entry->ascq 2675 || ((table_entry->action & SSQ_RANGE) != 0 2676 && ascq >= (table_entry - 1)->ascq)) 2677 return (0); 2678 return (-1); 2679 } 2680 return (1); 2681 } 2682 return (-1); 2683 } 2684 2685 static int 2686 senseentrycomp(const void *key, const void *member) 2687 { 2688 int sense_key; 2689 const struct sense_key_table_entry *table_entry; 2690 2691 sense_key = *((const int *)key); 2692 table_entry = (const struct sense_key_table_entry *)member; 2693 2694 if (sense_key >= table_entry->sense_key) { 2695 if (sense_key == table_entry->sense_key) 2696 return (0); 2697 return (1); 2698 } 2699 return (-1); 2700 } 2701 2702 static void 2703 fetchtableentries(int sense_key, int asc, int ascq, 2704 struct scsi_inquiry_data *inq_data, 2705 const struct sense_key_table_entry **sense_entry, 2706 const struct asc_table_entry **asc_entry) 2707 { 2708 caddr_t match; 2709 const struct asc_table_entry *asc_tables[2]; 2710 const struct sense_key_table_entry *sense_tables[2]; 2711 struct asc_key asc_ascq; 2712 size_t asc_tables_size[2]; 2713 size_t sense_tables_size[2]; 2714 int num_asc_tables; 2715 int num_sense_tables; 2716 int i; 2717 2718 /* Default to failure */ 2719 *sense_entry = NULL; 2720 *asc_entry = NULL; 2721 match = NULL; 2722 if (inq_data != NULL) 2723 match = cam_quirkmatch((caddr_t)inq_data, 2724 (caddr_t)sense_quirk_table, 2725 sense_quirk_table_size, 2726 sizeof(*sense_quirk_table), 2727 scsi_inquiry_match); 2728 2729 if (match != NULL) { 2730 struct scsi_sense_quirk_entry *quirk; 2731 2732 quirk = (struct scsi_sense_quirk_entry *)match; 2733 asc_tables[0] = quirk->asc_info; 2734 asc_tables_size[0] = quirk->num_ascs; 2735 asc_tables[1] = asc_table; 2736 asc_tables_size[1] = asc_table_size; 2737 num_asc_tables = 2; 2738 sense_tables[0] = quirk->sense_key_info; 2739 sense_tables_size[0] = quirk->num_sense_keys; 2740 sense_tables[1] = sense_key_table; 2741 sense_tables_size[1] = sense_key_table_size; 2742 num_sense_tables = 2; 2743 } else { 2744 asc_tables[0] = asc_table; 2745 asc_tables_size[0] = asc_table_size; 2746 num_asc_tables = 1; 2747 sense_tables[0] = sense_key_table; 2748 sense_tables_size[0] = sense_key_table_size; 2749 num_sense_tables = 1; 2750 } 2751 2752 asc_ascq.asc = asc; 2753 asc_ascq.ascq = ascq; 2754 for (i = 0; i < num_asc_tables; i++) { 2755 void *found_entry; 2756 2757 found_entry = bsearch(&asc_ascq, asc_tables[i], 2758 asc_tables_size[i], 2759 sizeof(**asc_tables), 2760 ascentrycomp); 2761 2762 if (found_entry) { 2763 *asc_entry = (struct asc_table_entry *)found_entry; 2764 break; 2765 } 2766 } 2767 2768 for (i = 0; i < num_sense_tables; i++) { 2769 void *found_entry; 2770 2771 found_entry = bsearch(&sense_key, sense_tables[i], 2772 sense_tables_size[i], 2773 sizeof(**sense_tables), 2774 senseentrycomp); 2775 2776 if (found_entry) { 2777 *sense_entry = 2778 (struct sense_key_table_entry *)found_entry; 2779 break; 2780 } 2781 } 2782 } 2783 2784 void 2785 scsi_sense_desc(int sense_key, int asc, int ascq, 2786 struct scsi_inquiry_data *inq_data, 2787 const char **sense_key_desc, const char **asc_desc) 2788 { 2789 const struct asc_table_entry *asc_entry; 2790 const struct sense_key_table_entry *sense_entry; 2791 2792 fetchtableentries(sense_key, asc, ascq, 2793 inq_data, 2794 &sense_entry, 2795 &asc_entry); 2796 2797 *sense_key_desc = sense_entry->desc; 2798 2799 if (asc_entry != NULL) 2800 *asc_desc = asc_entry->desc; 2801 else if (asc >= 0x80 && asc <= 0xff) 2802 *asc_desc = "Vendor Specific ASC"; 2803 else if (ascq >= 0x80 && ascq <= 0xff) 2804 *asc_desc = "Vendor Specific ASCQ"; 2805 else 2806 *asc_desc = "Reserved ASC/ASCQ pair"; 2807 } 2808 2809 /* 2810 * Given sense and device type information, return the appropriate action. 2811 * If we do not understand the specific error as identified by the ASC/ASCQ 2812 * pair, fall back on the more generic actions derived from the sense key. 2813 */ 2814 scsi_sense_action 2815 scsi_error_action(struct ccb_scsiio *csio, struct scsi_inquiry_data *inq_data, 2816 u_int32_t sense_flags) 2817 { 2818 const struct asc_table_entry *asc_entry; 2819 const struct sense_key_table_entry *sense_entry; 2820 int error_code, sense_key, asc, ascq; 2821 scsi_sense_action action; 2822 2823 scsi_extract_sense(&csio->sense_data, &error_code, 2824 &sense_key, &asc, &ascq); 2825 2826 if (error_code == SSD_DEFERRED_ERROR) { 2827 /* 2828 * XXX dufault@FreeBSD.org 2829 * This error doesn't relate to the command associated 2830 * with this request sense. A deferred error is an error 2831 * for a command that has already returned GOOD status 2832 * (see SCSI2 8.2.14.2). 2833 * 2834 * By my reading of that section, it looks like the current 2835 * command has been cancelled, we should now clean things up 2836 * (hopefully recovering any lost data) and then retry the 2837 * current command. There are two easy choices, both wrong: 2838 * 2839 * 1. Drop through (like we had been doing), thus treating 2840 * this as if the error were for the current command and 2841 * return and stop the current command. 2842 * 2843 * 2. Issue a retry (like I made it do) thus hopefully 2844 * recovering the current transfer, and ignoring the 2845 * fact that we've dropped a command. 2846 * 2847 * These should probably be handled in a device specific 2848 * sense handler or punted back up to a user mode daemon 2849 */ 2850 action = SS_RETRY|SSQ_DECREMENT_COUNT|SSQ_PRINT_SENSE; 2851 } else { 2852 fetchtableentries(sense_key, asc, ascq, 2853 inq_data, 2854 &sense_entry, 2855 &asc_entry); 2856 2857 /* 2858 * Override the 'No additional Sense' entry (0,0) 2859 * with the error action of the sense key. 2860 */ 2861 if (asc_entry != NULL 2862 && (asc != 0 || ascq != 0)) 2863 action = asc_entry->action; 2864 else 2865 action = sense_entry->action; 2866 2867 if (sense_key == SSD_KEY_RECOVERED_ERROR) { 2868 /* 2869 * The action succeeded but the device wants 2870 * the user to know that some recovery action 2871 * was required. 2872 */ 2873 action &= ~(SS_MASK|SSQ_MASK|SS_ERRMASK); 2874 action |= SS_NOP|SSQ_PRINT_SENSE; 2875 } else if (sense_key == SSD_KEY_ILLEGAL_REQUEST) { 2876 if ((sense_flags & SF_QUIET_IR) != 0) 2877 action &= ~SSQ_PRINT_SENSE; 2878 } else if (sense_key == SSD_KEY_UNIT_ATTENTION) { 2879 if ((sense_flags & SF_RETRY_UA) != 0 2880 && (action & SS_MASK) == SS_FAIL) { 2881 action &= ~(SS_MASK|SSQ_MASK); 2882 action |= SS_RETRY|SSQ_DECREMENT_COUNT| 2883 SSQ_PRINT_SENSE; 2884 } 2885 } 2886 } 2887 #ifdef KERNEL 2888 if (bootverbose) 2889 sense_flags |= SF_PRINT_ALWAYS; 2890 #endif 2891 if ((sense_flags & SF_PRINT_ALWAYS) != 0) 2892 action |= SSQ_PRINT_SENSE; 2893 else if ((sense_flags & SF_NO_PRINT) != 0) 2894 action &= ~SSQ_PRINT_SENSE; 2895 2896 return (action); 2897 } 2898 2899 char * 2900 scsi_cdb_string(u_int8_t *cdb_ptr, char *cdb_string, size_t len) 2901 { 2902 u_int8_t cdb_len; 2903 int i; 2904 2905 if (cdb_ptr == NULL) 2906 return(""); 2907 2908 /* Silence warnings */ 2909 cdb_len = 0; 2910 2911 /* 2912 * This is taken from the SCSI-3 draft spec. 2913 * (T10/1157D revision 0.3) 2914 * The top 3 bits of an opcode are the group code. The next 5 bits 2915 * are the command code. 2916 * Group 0: six byte commands 2917 * Group 1: ten byte commands 2918 * Group 2: ten byte commands 2919 * Group 3: reserved 2920 * Group 4: sixteen byte commands 2921 * Group 5: twelve byte commands 2922 * Group 6: vendor specific 2923 * Group 7: vendor specific 2924 */ 2925 switch((*cdb_ptr >> 5) & 0x7) { 2926 case 0: 2927 cdb_len = 6; 2928 break; 2929 case 1: 2930 case 2: 2931 cdb_len = 10; 2932 break; 2933 case 3: 2934 case 6: 2935 case 7: 2936 /* in this case, just print out the opcode */ 2937 cdb_len = 1; 2938 break; 2939 case 4: 2940 cdb_len = 16; 2941 break; 2942 case 5: 2943 cdb_len = 12; 2944 break; 2945 } 2946 *cdb_string = '\0'; 2947 for (i = 0; i < cdb_len; i++) 2948 ksnprintf(cdb_string + strlen(cdb_string), 2949 len - strlen(cdb_string), "%x ", cdb_ptr[i]); 2950 2951 return(cdb_string); 2952 } 2953 2954 const char * 2955 scsi_status_string(struct ccb_scsiio *csio) 2956 { 2957 switch(csio->scsi_status) { 2958 case SCSI_STATUS_OK: 2959 return("OK"); 2960 case SCSI_STATUS_CHECK_COND: 2961 return("Check Condition"); 2962 case SCSI_STATUS_BUSY: 2963 return("Busy"); 2964 case SCSI_STATUS_INTERMED: 2965 return("Intermediate"); 2966 case SCSI_STATUS_INTERMED_COND_MET: 2967 return("Intermediate-Condition Met"); 2968 case SCSI_STATUS_RESERV_CONFLICT: 2969 return("Reservation Conflict"); 2970 case SCSI_STATUS_CMD_TERMINATED: 2971 return("Command Terminated"); 2972 case SCSI_STATUS_QUEUE_FULL: 2973 return("Queue Full"); 2974 case SCSI_STATUS_ACA_ACTIVE: 2975 return("ACA Active"); 2976 case SCSI_STATUS_TASK_ABORTED: 2977 return("Task Aborted"); 2978 default: { 2979 static char unkstr[64]; 2980 ksnprintf(unkstr, sizeof(unkstr), "Unknown %#x", 2981 csio->scsi_status); 2982 return(unkstr); 2983 } 2984 } 2985 } 2986 2987 /* 2988 * scsi_command_string() returns 0 for success and -1 for failure. 2989 */ 2990 #ifdef _KERNEL 2991 int 2992 scsi_command_string(struct ccb_scsiio *csio, struct sbuf *sb) 2993 #else 2994 int 2995 scsi_command_string(struct cam_device *device, struct ccb_scsiio *csio, 2996 struct sbuf *sb) 2997 #endif 2998 { 2999 struct scsi_inquiry_data *inq_data; 3000 char cdb_str[(SCSI_MAX_CDBLEN * 3) + 1]; 3001 #ifdef _KERNEL 3002 struct ccb_getdev cgd; 3003 #endif 3004 3005 #ifdef _KERNEL 3006 /* 3007 * Get the device information. 3008 */ 3009 xpt_setup_ccb(&cgd.ccb_h, 3010 csio->ccb_h.path, 3011 /*priority*/ 1); 3012 cgd.ccb_h.func_code = XPT_GDEV_TYPE; 3013 xpt_action((union ccb *)&cgd); 3014 3015 /* 3016 * If the device is unconfigured, just pretend that it is a hard 3017 * drive. scsi_op_desc() needs this. 3018 */ 3019 if (cgd.ccb_h.status == CAM_DEV_NOT_THERE) 3020 cgd.inq_data.device = T_DIRECT; 3021 3022 inq_data = &cgd.inq_data; 3023 3024 #else /* !_KERNEL */ 3025 3026 inq_data = &device->inq_data; 3027 3028 #endif /* _KERNEL/!_KERNEL */ 3029 3030 if ((csio->ccb_h.flags & CAM_CDB_POINTER) != 0) { 3031 sbuf_printf(sb, "%s. CDB: %s", 3032 scsi_op_desc(csio->cdb_io.cdb_ptr[0], inq_data), 3033 scsi_cdb_string(csio->cdb_io.cdb_ptr, cdb_str, 3034 sizeof(cdb_str))); 3035 } else { 3036 sbuf_printf(sb, "%s. CDB: %s", 3037 scsi_op_desc(csio->cdb_io.cdb_bytes[0], inq_data), 3038 scsi_cdb_string(csio->cdb_io.cdb_bytes, cdb_str, 3039 sizeof(cdb_str))); 3040 } 3041 3042 return(0); 3043 } 3044 3045 /* 3046 * scsi_sense_sbuf() returns 0 for success and -1 for failure. 3047 */ 3048 #ifdef _KERNEL 3049 int 3050 scsi_sense_sbuf(struct ccb_scsiio *csio, struct sbuf *sb, 3051 scsi_sense_string_flags flags) 3052 #else /* !_KERNEL */ 3053 int 3054 scsi_sense_sbuf(struct cam_device *device, struct ccb_scsiio *csio, 3055 struct sbuf *sb, scsi_sense_string_flags flags) 3056 #endif /* _KERNEL/!_KERNEL */ 3057 { 3058 struct scsi_sense_data *sense; 3059 struct scsi_inquiry_data *inq_data; 3060 #ifdef _KERNEL 3061 struct ccb_getdev cgd; 3062 #endif /* _KERNEL */ 3063 u_int32_t info; 3064 int error_code; 3065 int sense_key; 3066 int asc, ascq; 3067 char path_str[64]; 3068 3069 #ifndef _KERNEL 3070 if (device == NULL) 3071 return(-1); 3072 #endif /* !_KERNEL */ 3073 if ((csio == NULL) || (sb == NULL)) 3074 return(-1); 3075 3076 /* 3077 * If the CDB is a physical address, we can't deal with it.. 3078 */ 3079 if ((csio->ccb_h.flags & CAM_CDB_PHYS) != 0) 3080 flags &= ~SSS_FLAG_PRINT_COMMAND; 3081 3082 #ifdef _KERNEL 3083 xpt_path_string(csio->ccb_h.path, path_str, sizeof(path_str)); 3084 #else /* !_KERNEL */ 3085 cam_path_string(device, path_str, sizeof(path_str)); 3086 #endif /* _KERNEL/!_KERNEL */ 3087 3088 #ifdef _KERNEL 3089 /* 3090 * Get the device information. 3091 */ 3092 xpt_setup_ccb(&cgd.ccb_h, 3093 csio->ccb_h.path, 3094 /*priority*/ 1); 3095 cgd.ccb_h.func_code = XPT_GDEV_TYPE; 3096 xpt_action((union ccb *)&cgd); 3097 3098 /* 3099 * If the device is unconfigured, just pretend that it is a hard 3100 * drive. scsi_op_desc() needs this. 3101 */ 3102 if (cgd.ccb_h.status == CAM_DEV_NOT_THERE) 3103 cgd.inq_data.device = T_DIRECT; 3104 3105 inq_data = &cgd.inq_data; 3106 3107 #else /* !_KERNEL */ 3108 3109 inq_data = &device->inq_data; 3110 3111 #endif /* _KERNEL/!_KERNEL */ 3112 3113 sense = NULL; 3114 3115 if (flags & SSS_FLAG_PRINT_COMMAND) { 3116 3117 sbuf_cat(sb, path_str); 3118 3119 #ifdef _KERNEL 3120 scsi_command_string(csio, sb); 3121 #else /* !_KERNEL */ 3122 scsi_command_string(device, csio, sb); 3123 #endif /* _KERNEL/!_KERNEL */ 3124 } 3125 3126 /* 3127 * If the sense data is a physical pointer, forget it. 3128 */ 3129 if (csio->ccb_h.flags & CAM_SENSE_PTR) { 3130 if (csio->ccb_h.flags & CAM_SENSE_PHYS) 3131 return(-1); 3132 else { 3133 /* 3134 * bcopy the pointer to avoid unaligned access 3135 * errors on finicky architectures. We don't 3136 * ensure that the sense data is pointer aligned. 3137 */ 3138 bcopy(&csio->sense_data, &sense, 3139 sizeof(struct scsi_sense_data *)); 3140 } 3141 } else { 3142 /* 3143 * If the physical sense flag is set, but the sense pointer 3144 * is not also set, we assume that the user is an idiot and 3145 * return. (Well, okay, it could be that somehow, the 3146 * entire csio is physical, but we would have probably core 3147 * dumped on one of the bogus pointer deferences above 3148 * already.) 3149 */ 3150 if (csio->ccb_h.flags & CAM_SENSE_PHYS) 3151 return(-1); 3152 else 3153 sense = &csio->sense_data; 3154 } 3155 3156 3157 sbuf_cat(sb, path_str); 3158 3159 error_code = sense->error_code & SSD_ERRCODE; 3160 sense_key = sense->flags & SSD_KEY; 3161 3162 switch (error_code) { 3163 case SSD_DEFERRED_ERROR: 3164 sbuf_printf(sb, "Deferred Error: "); 3165 3166 /* FALLTHROUGH */ 3167 case SSD_CURRENT_ERROR: 3168 { 3169 const char *sense_key_desc; 3170 const char *asc_desc; 3171 3172 asc = (sense->extra_len >= 5) ? sense->add_sense_code : 0; 3173 ascq = (sense->extra_len >= 6) ? sense->add_sense_code_qual : 0; 3174 scsi_sense_desc(sense_key, asc, ascq, inq_data, 3175 &sense_key_desc, &asc_desc); 3176 sbuf_cat(sb, sense_key_desc); 3177 3178 info = scsi_4btoul(sense->info); 3179 3180 if (sense->error_code & SSD_ERRCODE_VALID) { 3181 3182 switch (sense_key) { 3183 case SSD_KEY_NOT_READY: 3184 case SSD_KEY_ILLEGAL_REQUEST: 3185 case SSD_KEY_UNIT_ATTENTION: 3186 case SSD_KEY_DATA_PROTECT: 3187 break; 3188 case SSD_KEY_BLANK_CHECK: 3189 sbuf_printf(sb, " req sz: %d (decimal)", info); 3190 break; 3191 default: 3192 if (info) { 3193 if (sense->flags & SSD_ILI) { 3194 sbuf_printf(sb, " ILI (length " 3195 "mismatch): %d", info); 3196 3197 } else { 3198 sbuf_printf(sb, " info:%x", 3199 info); 3200 } 3201 } 3202 } 3203 } else if (info) { 3204 sbuf_printf(sb, " info?:%x", info); 3205 } 3206 3207 if (sense->extra_len >= 4) { 3208 if (bcmp(sense->cmd_spec_info, "\0\0\0\0", 4)) { 3209 sbuf_printf(sb, " csi:%x,%x,%x,%x", 3210 sense->cmd_spec_info[0], 3211 sense->cmd_spec_info[1], 3212 sense->cmd_spec_info[2], 3213 sense->cmd_spec_info[3]); 3214 } 3215 } 3216 3217 sbuf_printf(sb, " asc:%x,%x\n%s%s", asc, ascq, 3218 path_str, asc_desc); 3219 3220 if (sense->extra_len >= 7 && sense->fru) { 3221 sbuf_printf(sb, " field replaceable unit: %x", 3222 sense->fru); 3223 } 3224 3225 if ((sense->extra_len >= 10) 3226 && (sense->sense_key_spec[0] & SSD_SCS_VALID) != 0) { 3227 switch(sense_key) { 3228 case SSD_KEY_ILLEGAL_REQUEST: { 3229 int bad_command; 3230 char tmpstr2[40]; 3231 3232 if (sense->sense_key_spec[0] & 0x40) 3233 bad_command = 1; 3234 else 3235 bad_command = 0; 3236 3237 tmpstr2[0] = '\0'; 3238 3239 /* Bit pointer is valid */ 3240 if (sense->sense_key_spec[0] & 0x08) 3241 ksnprintf(tmpstr2, sizeof(tmpstr2), 3242 "bit %d", 3243 sense->sense_key_spec[0] & 0x7); 3244 sbuf_printf(sb, 3245 ": %s byte %d %s is invalid", 3246 bad_command ? 3247 "Command" : "Data", 3248 scsi_2btoul( 3249 &sense->sense_key_spec[1]), 3250 tmpstr2); 3251 break; 3252 } 3253 case SSD_KEY_RECOVERED_ERROR: 3254 case SSD_KEY_HARDWARE_ERROR: 3255 case SSD_KEY_MEDIUM_ERROR: 3256 sbuf_printf(sb, " actual retry count: %d", 3257 scsi_2btoul( 3258 &sense->sense_key_spec[1])); 3259 break; 3260 default: 3261 sbuf_printf(sb, " sks:%#x,%#x", 3262 sense->sense_key_spec[0], 3263 scsi_2btoul( 3264 &sense->sense_key_spec[1])); 3265 break; 3266 } 3267 } 3268 break; 3269 3270 } 3271 default: 3272 sbuf_printf(sb, "Sense Error Code 0x%x", sense->error_code); 3273 if (sense->error_code & SSD_ERRCODE_VALID) { 3274 sbuf_printf(sb, " at block no. %d (decimal)", 3275 info = scsi_4btoul(sense->info)); 3276 } 3277 } 3278 3279 sbuf_printf(sb, "\n"); 3280 3281 return(0); 3282 } 3283 3284 #ifdef _KERNEL 3285 char * 3286 scsi_sense_string(struct ccb_scsiio *csio, char *str, int str_len) 3287 #else /* !_KERNEL */ 3288 char * 3289 scsi_sense_string(struct cam_device *device, struct ccb_scsiio *csio, 3290 char *str, int str_len) 3291 #endif /* _KERNEL/!_KERNEL */ 3292 { 3293 struct sbuf sb; 3294 3295 sbuf_new(&sb, str, str_len, 0); 3296 3297 #ifdef _KERNEL 3298 scsi_sense_sbuf(csio, &sb, SSS_FLAG_PRINT_COMMAND); 3299 #else /* !_KERNEL */ 3300 scsi_sense_sbuf(device, csio, &sb, SSS_FLAG_PRINT_COMMAND); 3301 #endif /* _KERNEL/!_KERNEL */ 3302 3303 sbuf_finish(&sb); 3304 3305 return(sbuf_data(&sb)); 3306 } 3307 3308 #ifdef _KERNEL 3309 void 3310 scsi_sense_print(struct ccb_scsiio *csio) 3311 { 3312 struct sbuf sb; 3313 char str[512]; 3314 3315 sbuf_new(&sb, str, sizeof(str), 0); 3316 3317 scsi_sense_sbuf(csio, &sb, SSS_FLAG_PRINT_COMMAND); 3318 3319 sbuf_finish(&sb); 3320 3321 kprintf("%s", sbuf_data(&sb)); 3322 } 3323 3324 #else /* !_KERNEL */ 3325 void 3326 scsi_sense_print(struct cam_device *device, struct ccb_scsiio *csio, 3327 FILE *ofile) 3328 { 3329 struct sbuf sb; 3330 char str[512]; 3331 3332 if ((device == NULL) || (csio == NULL) || (ofile == NULL)) 3333 return; 3334 3335 sbuf_new(&sb, str, sizeof(str), 0); 3336 3337 scsi_sense_sbuf(device, csio, &sb, SSS_FLAG_PRINT_COMMAND); 3338 3339 sbuf_finish(&sb); 3340 3341 fprintf(ofile, "%s", sbuf_data(&sb)); 3342 } 3343 3344 #endif /* _KERNEL/!_KERNEL */ 3345 3346 /* 3347 * This function currently requires at least 36 bytes, or 3348 * SHORT_INQUIRY_LENGTH, worth of data to function properly. If this 3349 * function needs more or less data in the future, another length should be 3350 * defined in scsi_all.h to indicate the minimum amount of data necessary 3351 * for this routine to function properly. 3352 */ 3353 void 3354 scsi_print_inquiry(struct scsi_inquiry_data *inq_data) 3355 { 3356 u_int8_t type; 3357 char *dtype, *qtype; 3358 char vendor[16], product[48], revision[16], rstr[4]; 3359 3360 type = SID_TYPE(inq_data); 3361 3362 /* 3363 * Figure out basic device type and qualifier. 3364 */ 3365 if (SID_QUAL_IS_VENDOR_UNIQUE(inq_data)) { 3366 qtype = "(vendor-unique qualifier)"; 3367 } else { 3368 switch (SID_QUAL(inq_data)) { 3369 case SID_QUAL_LU_CONNECTED: 3370 qtype = ""; 3371 break; 3372 3373 case SID_QUAL_LU_OFFLINE: 3374 qtype = "(offline)"; 3375 break; 3376 3377 case SID_QUAL_RSVD: 3378 qtype = "(reserved qualifier)"; 3379 break; 3380 default: 3381 case SID_QUAL_BAD_LU: 3382 qtype = "(LUN not supported)"; 3383 break; 3384 } 3385 } 3386 3387 switch (type) { 3388 case T_DIRECT: 3389 dtype = "Direct Access"; 3390 break; 3391 case T_SEQUENTIAL: 3392 dtype = "Sequential Access"; 3393 break; 3394 case T_PRINTER: 3395 dtype = "Printer"; 3396 break; 3397 case T_PROCESSOR: 3398 dtype = "Processor"; 3399 break; 3400 case T_WORM: 3401 dtype = "WORM"; 3402 break; 3403 case T_CDROM: 3404 dtype = "CD-ROM"; 3405 break; 3406 case T_SCANNER: 3407 dtype = "Scanner"; 3408 break; 3409 case T_OPTICAL: 3410 dtype = "Optical"; 3411 break; 3412 case T_CHANGER: 3413 dtype = "Changer"; 3414 break; 3415 case T_COMM: 3416 dtype = "Communication"; 3417 break; 3418 case T_STORARRAY: 3419 dtype = "Storage Array"; 3420 break; 3421 case T_ENCLOSURE: 3422 dtype = "Enclosure Services"; 3423 break; 3424 case T_RBC: 3425 dtype = "Simplified Direct Access"; 3426 break; 3427 case T_OCRW: 3428 dtype = "Optical Card Read/Write"; 3429 break; 3430 case T_OSD: 3431 dtype = "Object-Based Storage"; 3432 break; 3433 case T_ADC: 3434 dtype = "Automation/Drive Interface"; 3435 break; 3436 case T_NODEVICE: 3437 dtype = "Uninstalled"; 3438 default: 3439 dtype = "unknown"; 3440 break; 3441 } 3442 3443 cam_strvis(vendor, inq_data->vendor, sizeof(inq_data->vendor), 3444 sizeof(vendor)); 3445 cam_strvis(product, inq_data->product, sizeof(inq_data->product), 3446 sizeof(product)); 3447 cam_strvis(revision, inq_data->revision, sizeof(inq_data->revision), 3448 sizeof(revision)); 3449 3450 if (SID_ANSI_REV(inq_data) == SCSI_REV_CCS) 3451 bcopy("CCS", rstr, 4); 3452 else 3453 ksnprintf(rstr, sizeof (rstr), "%d", SID_ANSI_REV(inq_data)); 3454 kprintf("<%s %s %s> %s %s SCSI-%s device %s\n", 3455 vendor, product, revision, 3456 SID_IS_REMOVABLE(inq_data) ? "Removable" : "Fixed", 3457 dtype, rstr, qtype); 3458 } 3459 3460 /* 3461 * Table of syncrates that don't follow the "divisible by 4" 3462 * rule. This table will be expanded in future SCSI specs. 3463 */ 3464 static struct { 3465 u_int period_factor; 3466 u_int period; /* in 100ths of ns */ 3467 } scsi_syncrates[] = { 3468 { 0x08, 625 }, /* FAST-160 */ 3469 { 0x09, 1250 }, /* FAST-80 */ 3470 { 0x0a, 2500 }, /* FAST-40 40MHz */ 3471 { 0x0b, 3030 }, /* FAST-40 33MHz */ 3472 { 0x0c, 5000 } /* FAST-20 */ 3473 }; 3474 3475 /* 3476 * Return the frequency in kHz corresponding to the given 3477 * sync period factor. 3478 */ 3479 u_int 3480 scsi_calc_syncsrate(u_int period_factor) 3481 { 3482 int i; 3483 int num_syncrates; 3484 3485 /* 3486 * It's a bug if period is zero, but if it is anyway, don't 3487 * die with a divide fault- instead return something which 3488 * 'approximates' async 3489 */ 3490 if (period_factor == 0) { 3491 return (3300); 3492 } 3493 3494 num_syncrates = sizeof(scsi_syncrates) / sizeof(scsi_syncrates[0]); 3495 /* See if the period is in the "exception" table */ 3496 for (i = 0; i < num_syncrates; i++) { 3497 3498 if (period_factor == scsi_syncrates[i].period_factor) { 3499 /* Period in kHz */ 3500 return (100000000 / scsi_syncrates[i].period); 3501 } 3502 } 3503 3504 /* 3505 * Wasn't in the table, so use the standard 3506 * 4 times conversion. 3507 */ 3508 return (10000000 / (period_factor * 4 * 10)); 3509 } 3510 3511 /* 3512 * Return the SCSI sync parameter that corresponsd to 3513 * the passed in period in 10ths of ns. 3514 */ 3515 u_int 3516 scsi_calc_syncparam(u_int period) 3517 { 3518 int i; 3519 int num_syncrates; 3520 3521 if (period == 0) 3522 return (~0); /* Async */ 3523 3524 /* Adjust for exception table being in 100ths. */ 3525 period *= 10; 3526 num_syncrates = sizeof(scsi_syncrates) / sizeof(scsi_syncrates[0]); 3527 /* See if the period is in the "exception" table */ 3528 for (i = 0; i < num_syncrates; i++) { 3529 3530 if (period <= scsi_syncrates[i].period) { 3531 /* Period in 100ths of ns */ 3532 return (scsi_syncrates[i].period_factor); 3533 } 3534 } 3535 3536 /* 3537 * Wasn't in the table, so use the standard 3538 * 1/4 period in ns conversion. 3539 */ 3540 return (period/400); 3541 } 3542 3543 void 3544 scsi_test_unit_ready(struct ccb_scsiio *csio, u_int32_t retries, 3545 void (*cbfcnp)(struct cam_periph *, union ccb *), 3546 u_int8_t tag_action, u_int8_t sense_len, u_int32_t timeout) 3547 { 3548 struct scsi_test_unit_ready *scsi_cmd; 3549 3550 cam_fill_csio(csio, 3551 retries, 3552 cbfcnp, 3553 CAM_DIR_NONE, 3554 tag_action, 3555 /*data_ptr*/NULL, 3556 /*dxfer_len*/0, 3557 sense_len, 3558 sizeof(*scsi_cmd), 3559 timeout); 3560 3561 scsi_cmd = (struct scsi_test_unit_ready *)&csio->cdb_io.cdb_bytes; 3562 bzero(scsi_cmd, sizeof(*scsi_cmd)); 3563 scsi_cmd->opcode = TEST_UNIT_READY; 3564 } 3565 3566 void 3567 scsi_request_sense(struct ccb_scsiio *csio, u_int32_t retries, 3568 void (*cbfcnp)(struct cam_periph *, union ccb *), 3569 void *data_ptr, u_int8_t dxfer_len, u_int8_t tag_action, 3570 u_int8_t sense_len, u_int32_t timeout) 3571 { 3572 struct scsi_request_sense *scsi_cmd; 3573 3574 cam_fill_csio(csio, 3575 retries, 3576 cbfcnp, 3577 CAM_DIR_IN, 3578 tag_action, 3579 data_ptr, 3580 dxfer_len, 3581 sense_len, 3582 sizeof(*scsi_cmd), 3583 timeout); 3584 3585 scsi_cmd = (struct scsi_request_sense *)&csio->cdb_io.cdb_bytes; 3586 bzero(scsi_cmd, sizeof(*scsi_cmd)); 3587 scsi_cmd->opcode = REQUEST_SENSE; 3588 scsi_cmd->length = dxfer_len; 3589 } 3590 3591 void 3592 scsi_inquiry(struct ccb_scsiio *csio, u_int32_t retries, 3593 void (*cbfcnp)(struct cam_periph *, union ccb *), 3594 u_int8_t tag_action, u_int8_t *inq_buf, u_int32_t inq_len, 3595 int evpd, u_int8_t page_code, u_int8_t sense_len, 3596 u_int32_t timeout) 3597 { 3598 struct scsi_inquiry *scsi_cmd; 3599 3600 cam_fill_csio(csio, 3601 retries, 3602 cbfcnp, 3603 /*flags*/CAM_DIR_IN, 3604 tag_action, 3605 /*data_ptr*/inq_buf, 3606 /*dxfer_len*/inq_len, 3607 sense_len, 3608 sizeof(*scsi_cmd), 3609 timeout); 3610 3611 scsi_cmd = (struct scsi_inquiry *)&csio->cdb_io.cdb_bytes; 3612 bzero(scsi_cmd, sizeof(*scsi_cmd)); 3613 scsi_cmd->opcode = INQUIRY; 3614 if (evpd) { 3615 scsi_cmd->byte2 |= SI_EVPD; 3616 scsi_cmd->page_code = page_code; 3617 } 3618 /* 3619 * A 'transfer units' count of 256 is coded as 3620 * zero for all commands with a single byte count 3621 * field. 3622 */ 3623 if (inq_len == 256) 3624 inq_len = 0; 3625 scsi_cmd->length = inq_len; 3626 } 3627 3628 void 3629 scsi_mode_sense(struct ccb_scsiio *csio, u_int32_t retries, 3630 void (*cbfcnp)(struct cam_periph *, union ccb *), 3631 u_int8_t tag_action, int dbd, u_int8_t page_code, 3632 u_int8_t page, u_int8_t *param_buf, u_int32_t param_len, 3633 u_int8_t sense_len, u_int32_t timeout) 3634 { 3635 scsi_mode_sense_len(csio, retries, cbfcnp, tag_action, dbd, 3636 page_code, page, param_buf, param_len, 0, 3637 sense_len, timeout); 3638 } 3639 3640 void 3641 scsi_mode_sense_len(struct ccb_scsiio *csio, u_int32_t retries, 3642 void (*cbfcnp)(struct cam_periph *, union ccb *), 3643 u_int8_t tag_action, int dbd, u_int8_t page_code, 3644 u_int8_t page, u_int8_t *param_buf, u_int32_t param_len, 3645 int minimum_cmd_size, u_int8_t sense_len, u_int32_t timeout) 3646 { 3647 u_int8_t cdb_len; 3648 3649 /* 3650 * Use the smallest possible command to perform the operation. 3651 */ 3652 if ((param_len < 256) && (minimum_cmd_size < 10)) { 3653 /* 3654 * We can fit in a 6 byte cdb. 3655 */ 3656 struct scsi_mode_sense_6 *scsi_cmd; 3657 3658 scsi_cmd = (struct scsi_mode_sense_6 *)&csio->cdb_io.cdb_bytes; 3659 bzero(scsi_cmd, sizeof(*scsi_cmd)); 3660 scsi_cmd->opcode = MODE_SENSE_6; 3661 if (dbd != 0) 3662 scsi_cmd->byte2 |= SMS_DBD; 3663 scsi_cmd->page = page_code | page; 3664 scsi_cmd->length = param_len; 3665 cdb_len = sizeof(*scsi_cmd); 3666 } else { 3667 /* 3668 * Need a 10 byte cdb. 3669 */ 3670 struct scsi_mode_sense_10 *scsi_cmd; 3671 3672 scsi_cmd = (struct scsi_mode_sense_10 *)&csio->cdb_io.cdb_bytes; 3673 bzero(scsi_cmd, sizeof(*scsi_cmd)); 3674 scsi_cmd->opcode = MODE_SENSE_10; 3675 if (dbd != 0) 3676 scsi_cmd->byte2 |= SMS_DBD; 3677 scsi_cmd->page = page_code | page; 3678 scsi_ulto2b(param_len, scsi_cmd->length); 3679 cdb_len = sizeof(*scsi_cmd); 3680 } 3681 cam_fill_csio(csio, 3682 retries, 3683 cbfcnp, 3684 CAM_DIR_IN, 3685 tag_action, 3686 param_buf, 3687 param_len, 3688 sense_len, 3689 cdb_len, 3690 timeout); 3691 } 3692 3693 void 3694 scsi_mode_select(struct ccb_scsiio *csio, u_int32_t retries, 3695 void (*cbfcnp)(struct cam_periph *, union ccb *), 3696 u_int8_t tag_action, int scsi_page_fmt, int save_pages, 3697 u_int8_t *param_buf, u_int32_t param_len, u_int8_t sense_len, 3698 u_int32_t timeout) 3699 { 3700 scsi_mode_select_len(csio, retries, cbfcnp, tag_action, 3701 scsi_page_fmt, save_pages, param_buf, 3702 param_len, 0, sense_len, timeout); 3703 } 3704 3705 void 3706 scsi_mode_select_len(struct ccb_scsiio *csio, u_int32_t retries, 3707 void (*cbfcnp)(struct cam_periph *, union ccb *), 3708 u_int8_t tag_action, int scsi_page_fmt, int save_pages, 3709 u_int8_t *param_buf, u_int32_t param_len, 3710 int minimum_cmd_size, u_int8_t sense_len, 3711 u_int32_t timeout) 3712 { 3713 u_int8_t cdb_len; 3714 3715 /* 3716 * Use the smallest possible command to perform the operation. 3717 */ 3718 if ((param_len < 256) && (minimum_cmd_size < 10)) { 3719 /* 3720 * We can fit in a 6 byte cdb. 3721 */ 3722 struct scsi_mode_select_6 *scsi_cmd; 3723 3724 scsi_cmd = (struct scsi_mode_select_6 *)&csio->cdb_io.cdb_bytes; 3725 bzero(scsi_cmd, sizeof(*scsi_cmd)); 3726 scsi_cmd->opcode = MODE_SELECT_6; 3727 if (scsi_page_fmt != 0) 3728 scsi_cmd->byte2 |= SMS_PF; 3729 if (save_pages != 0) 3730 scsi_cmd->byte2 |= SMS_SP; 3731 scsi_cmd->length = param_len; 3732 cdb_len = sizeof(*scsi_cmd); 3733 } else { 3734 /* 3735 * Need a 10 byte cdb. 3736 */ 3737 struct scsi_mode_select_10 *scsi_cmd; 3738 3739 scsi_cmd = 3740 (struct scsi_mode_select_10 *)&csio->cdb_io.cdb_bytes; 3741 bzero(scsi_cmd, sizeof(*scsi_cmd)); 3742 scsi_cmd->opcode = MODE_SELECT_10; 3743 if (scsi_page_fmt != 0) 3744 scsi_cmd->byte2 |= SMS_PF; 3745 if (save_pages != 0) 3746 scsi_cmd->byte2 |= SMS_SP; 3747 scsi_ulto2b(param_len, scsi_cmd->length); 3748 cdb_len = sizeof(*scsi_cmd); 3749 } 3750 cam_fill_csio(csio, 3751 retries, 3752 cbfcnp, 3753 CAM_DIR_OUT, 3754 tag_action, 3755 param_buf, 3756 param_len, 3757 sense_len, 3758 cdb_len, 3759 timeout); 3760 } 3761 3762 void 3763 scsi_read_capacity_16(struct ccb_scsiio *csio, uint32_t retries, 3764 void (*cbfcnp)(struct cam_periph *, union ccb *), 3765 uint8_t tag_action, uint64_t lba, int reladr, int pmi, 3766 struct scsi_read_capacity_data_long *rcap_buf, 3767 uint8_t sense_len, uint32_t timeout) 3768 { 3769 struct scsi_read_capacity_16 *scsi_cmd; 3770 3771 cam_fill_csio(csio, 3772 retries, 3773 cbfcnp, 3774 /*flags*/CAM_DIR_IN, 3775 tag_action, 3776 /*data_ptr*/(u_int8_t *)rcap_buf, 3777 /*dxfer_len*/sizeof(*rcap_buf), 3778 sense_len, 3779 sizeof(*scsi_cmd), 3780 timeout); 3781 scsi_cmd = (struct scsi_read_capacity_16 *)&csio->cdb_io.cdb_bytes; 3782 bzero(scsi_cmd, sizeof(*scsi_cmd)); 3783 scsi_cmd->opcode = SERVICE_ACTION_IN; 3784 scsi_cmd->service_action = SRC16_SERVICE_ACTION; 3785 scsi_u64to8b(lba, scsi_cmd->addr); 3786 scsi_ulto4b(sizeof(*rcap_buf), scsi_cmd->alloc_len); 3787 if (pmi) 3788 reladr |= SRC16_PMI; 3789 if (reladr) 3790 reladr |= SRC16_RELADR; 3791 } 3792 3793 /* 3794 * Prevent or allow the user to remove the media 3795 */ 3796 void 3797 scsi_prevent(struct ccb_scsiio *csio, u_int32_t retries, 3798 void (*cbfcnp)(struct cam_periph *, union ccb *), 3799 u_int8_t tag_action, u_int8_t action, 3800 u_int8_t sense_len, u_int32_t timeout) 3801 { 3802 struct scsi_prevent *scsi_cmd; 3803 3804 cam_fill_csio(csio, 3805 retries, 3806 cbfcnp, 3807 /*flags*/CAM_DIR_NONE, 3808 tag_action, 3809 /*data_ptr*/NULL, 3810 /*dxfer_len*/0, 3811 sense_len, 3812 sizeof(*scsi_cmd), 3813 timeout); 3814 3815 scsi_cmd = (struct scsi_prevent *)&csio->cdb_io.cdb_bytes; 3816 bzero(scsi_cmd, sizeof(*scsi_cmd)); 3817 scsi_cmd->opcode = PREVENT_ALLOW; 3818 scsi_cmd->how = action; 3819 } 3820 3821 /* XXX allow specification of address and PMI bit and LBA */ 3822 void 3823 scsi_read_capacity(struct ccb_scsiio *csio, u_int32_t retries, 3824 void (*cbfcnp)(struct cam_periph *, union ccb *), 3825 u_int8_t tag_action, 3826 struct scsi_read_capacity_data *rcap_buf, 3827 u_int8_t sense_len, u_int32_t timeout) 3828 { 3829 struct scsi_read_capacity *scsi_cmd; 3830 3831 cam_fill_csio(csio, 3832 retries, 3833 cbfcnp, 3834 /*flags*/CAM_DIR_IN, 3835 tag_action, 3836 /*data_ptr*/(u_int8_t *)rcap_buf, 3837 /*dxfer_len*/sizeof(*rcap_buf), 3838 sense_len, 3839 sizeof(*scsi_cmd), 3840 timeout); 3841 3842 scsi_cmd = (struct scsi_read_capacity *)&csio->cdb_io.cdb_bytes; 3843 bzero(scsi_cmd, sizeof(*scsi_cmd)); 3844 scsi_cmd->opcode = READ_CAPACITY; 3845 } 3846 3847 void 3848 scsi_report_luns(struct ccb_scsiio *csio, u_int32_t retries, 3849 void (*cbfcnp)(struct cam_periph *, union ccb *), 3850 u_int8_t tag_action, u_int8_t select_report, 3851 struct scsi_report_luns_data *rpl_buf, u_int32_t alloc_len, 3852 u_int8_t sense_len, u_int32_t timeout) 3853 { 3854 struct scsi_report_luns *scsi_cmd; 3855 3856 cam_fill_csio(csio, 3857 retries, 3858 cbfcnp, 3859 /*flags*/CAM_DIR_IN, 3860 tag_action, 3861 /*data_ptr*/(u_int8_t *)rpl_buf, 3862 /*dxfer_len*/alloc_len, 3863 sense_len, 3864 sizeof(*scsi_cmd), 3865 timeout); 3866 scsi_cmd = (struct scsi_report_luns *)&csio->cdb_io.cdb_bytes; 3867 bzero(scsi_cmd, sizeof(*scsi_cmd)); 3868 scsi_cmd->opcode = REPORT_LUNS; 3869 scsi_cmd->select_report = select_report; 3870 scsi_ulto4b(alloc_len, scsi_cmd->length); 3871 } 3872 3873 /* 3874 * Syncronize the media to the contents of the cache for 3875 * the given lba/count pair. Specifying 0/0 means sync 3876 * the whole cache. 3877 */ 3878 void 3879 scsi_synchronize_cache(struct ccb_scsiio *csio, u_int32_t retries, 3880 void (*cbfcnp)(struct cam_periph *, union ccb *), 3881 u_int8_t tag_action, u_int32_t begin_lba, 3882 u_int16_t lb_count, u_int8_t sense_len, 3883 u_int32_t timeout) 3884 { 3885 struct scsi_sync_cache *scsi_cmd; 3886 3887 cam_fill_csio(csio, 3888 retries, 3889 cbfcnp, 3890 /*flags*/CAM_DIR_NONE, 3891 tag_action, 3892 /*data_ptr*/NULL, 3893 /*dxfer_len*/0, 3894 sense_len, 3895 sizeof(*scsi_cmd), 3896 timeout); 3897 3898 scsi_cmd = (struct scsi_sync_cache *)&csio->cdb_io.cdb_bytes; 3899 bzero(scsi_cmd, sizeof(*scsi_cmd)); 3900 scsi_cmd->opcode = SYNCHRONIZE_CACHE; 3901 scsi_ulto4b(begin_lba, scsi_cmd->begin_lba); 3902 scsi_ulto2b(lb_count, scsi_cmd->lb_count); 3903 } 3904 3905 void 3906 scsi_read_write(struct ccb_scsiio *csio, u_int32_t retries, 3907 void (*cbfcnp)(struct cam_periph *, union ccb *), 3908 u_int8_t tag_action, int readop, u_int8_t byte2, 3909 int minimum_cmd_size, u_int64_t lba, u_int32_t block_count, 3910 u_int8_t *data_ptr, u_int32_t dxfer_len, u_int8_t sense_len, 3911 u_int32_t timeout) 3912 { 3913 u_int8_t cdb_len; 3914 3915 /* 3916 * Use the smallest possible command to perform the operation 3917 * as some legacy hardware does not support the 10 byte commands. 3918 * If any of the bits in byte2 is set, we have to go with a larger 3919 * command. 3920 */ 3921 if ((minimum_cmd_size < 10) 3922 && ((lba & 0x1fffff) == lba) 3923 && ((block_count & 0xff) == block_count) 3924 && (byte2 == 0)) { 3925 /* 3926 * We can fit in a 6 byte cdb. 3927 */ 3928 struct scsi_rw_6 *scsi_cmd; 3929 3930 scsi_cmd = (struct scsi_rw_6 *)&csio->cdb_io.cdb_bytes; 3931 scsi_cmd->opcode = readop ? READ_6 : WRITE_6; 3932 scsi_ulto3b(lba, scsi_cmd->addr); 3933 scsi_cmd->length = block_count & 0xff; 3934 scsi_cmd->control = 0; 3935 cdb_len = sizeof(*scsi_cmd); 3936 3937 CAM_DEBUG(csio->ccb_h.path, CAM_DEBUG_SUBTRACE, 3938 ("6byte: %x%x%x:%d:%d\n", scsi_cmd->addr[0], 3939 scsi_cmd->addr[1], scsi_cmd->addr[2], 3940 scsi_cmd->length, dxfer_len)); 3941 } else if ((minimum_cmd_size < 12) 3942 && ((block_count & 0xffff) == block_count) 3943 && ((lba & 0xffffffffU) == lba)) { 3944 /* 3945 * Need a 10 byte cdb. 3946 */ 3947 struct scsi_rw_10 *scsi_cmd; 3948 3949 scsi_cmd = (struct scsi_rw_10 *)&csio->cdb_io.cdb_bytes; 3950 scsi_cmd->opcode = readop ? READ_10 : WRITE_10; 3951 scsi_cmd->byte2 = byte2; 3952 scsi_ulto4b(lba, scsi_cmd->addr); 3953 scsi_cmd->reserved = 0; 3954 scsi_ulto2b(block_count, scsi_cmd->length); 3955 scsi_cmd->control = 0; 3956 cdb_len = sizeof(*scsi_cmd); 3957 3958 CAM_DEBUG(csio->ccb_h.path, CAM_DEBUG_SUBTRACE, 3959 ("10byte: %x%x%x%x:%x%x: %d\n", scsi_cmd->addr[0], 3960 scsi_cmd->addr[1], scsi_cmd->addr[2], 3961 scsi_cmd->addr[3], scsi_cmd->length[0], 3962 scsi_cmd->length[1], dxfer_len)); 3963 } else if ((minimum_cmd_size < 16) 3964 && ((block_count & 0xffffffffU) == block_count) 3965 && ((lba & 0xffffffffU) == lba)) { 3966 /* 3967 * The block count is too big for a 10 byte CDB, use a 12 3968 * byte CDB. 3969 */ 3970 struct scsi_rw_12 *scsi_cmd; 3971 3972 scsi_cmd = (struct scsi_rw_12 *)&csio->cdb_io.cdb_bytes; 3973 scsi_cmd->opcode = readop ? READ_12 : WRITE_12; 3974 scsi_cmd->byte2 = byte2; 3975 scsi_ulto4b(lba, scsi_cmd->addr); 3976 scsi_cmd->reserved = 0; 3977 scsi_ulto4b(block_count, scsi_cmd->length); 3978 scsi_cmd->control = 0; 3979 cdb_len = sizeof(*scsi_cmd); 3980 3981 CAM_DEBUG(csio->ccb_h.path, CAM_DEBUG_SUBTRACE, 3982 ("12byte: %x%x%x%x:%x%x%x%x: %d\n", scsi_cmd->addr[0], 3983 scsi_cmd->addr[1], scsi_cmd->addr[2], 3984 scsi_cmd->addr[3], scsi_cmd->length[0], 3985 scsi_cmd->length[1], scsi_cmd->length[2], 3986 scsi_cmd->length[3], dxfer_len)); 3987 } else { 3988 /* 3989 * 16 byte CDB. We'll only get here if the LBA is larger 3990 * than 2^32, or if the user asks for a 16 byte command. 3991 */ 3992 struct scsi_rw_16 *scsi_cmd; 3993 3994 scsi_cmd = (struct scsi_rw_16 *)&csio->cdb_io.cdb_bytes; 3995 scsi_cmd->opcode = readop ? READ_16 : WRITE_16; 3996 scsi_cmd->byte2 = byte2; 3997 scsi_u64to8b(lba, scsi_cmd->addr); 3998 scsi_cmd->reserved = 0; 3999 scsi_ulto4b(block_count, scsi_cmd->length); 4000 scsi_cmd->control = 0; 4001 cdb_len = sizeof(*scsi_cmd); 4002 } 4003 cam_fill_csio(csio, 4004 retries, 4005 cbfcnp, 4006 /*flags*/readop ? CAM_DIR_IN : CAM_DIR_OUT, 4007 tag_action, 4008 data_ptr, 4009 dxfer_len, 4010 sense_len, 4011 cdb_len, 4012 timeout); 4013 } 4014 4015 void 4016 scsi_start_stop(struct ccb_scsiio *csio, u_int32_t retries, 4017 void (*cbfcnp)(struct cam_periph *, union ccb *), 4018 u_int8_t tag_action, int start, int load_eject, 4019 int immediate, u_int8_t sense_len, u_int32_t timeout) 4020 { 4021 struct scsi_start_stop_unit *scsi_cmd; 4022 int extra_flags = 0; 4023 4024 scsi_cmd = (struct scsi_start_stop_unit *)&csio->cdb_io.cdb_bytes; 4025 bzero(scsi_cmd, sizeof(*scsi_cmd)); 4026 scsi_cmd->opcode = START_STOP_UNIT; 4027 if (start != 0) { 4028 scsi_cmd->how |= SSS_START; 4029 /* it takes a lot of power to start a drive */ 4030 extra_flags |= CAM_HIGH_POWER; 4031 } 4032 if (load_eject != 0) 4033 scsi_cmd->how |= SSS_LOEJ; 4034 if (immediate != 0) 4035 scsi_cmd->byte2 |= SSS_IMMED; 4036 4037 cam_fill_csio(csio, 4038 retries, 4039 cbfcnp, 4040 /*flags*/CAM_DIR_NONE | extra_flags, 4041 tag_action, 4042 /*data_ptr*/NULL, 4043 /*dxfer_len*/0, 4044 sense_len, 4045 sizeof(*scsi_cmd), 4046 timeout); 4047 4048 } 4049 4050 void 4051 scsi_log_sense(struct ccb_scsiio *csio, u_int32_t retries, 4052 void (*cbfcnp)(struct cam_periph *, union ccb *), 4053 u_int8_t tag_action, u_int8_t page_code, u_int8_t page, 4054 int save_pages, int ppc, u_int32_t paramptr, 4055 u_int8_t *param_buf, u_int32_t param_len, u_int8_t sense_len, 4056 u_int32_t timeout) 4057 { 4058 struct scsi_log_sense *scsi_cmd; 4059 u_int8_t cdb_len; 4060 4061 scsi_cmd = (struct scsi_log_sense *)&csio->cdb_io.cdb_bytes; 4062 bzero(scsi_cmd, sizeof(*scsi_cmd)); 4063 scsi_cmd->opcode = LOG_SENSE; 4064 scsi_cmd->page = page_code | page; 4065 if (save_pages != 0) 4066 scsi_cmd->byte2 |= SLS_SP; 4067 if (ppc != 0) 4068 scsi_cmd->byte2 |= SLS_PPC; 4069 scsi_ulto2b(paramptr, scsi_cmd->paramptr); 4070 scsi_ulto2b(param_len, scsi_cmd->length); 4071 cdb_len = sizeof(*scsi_cmd); 4072 4073 cam_fill_csio(csio, 4074 retries, 4075 cbfcnp, 4076 /*flags*/CAM_DIR_IN, 4077 tag_action, 4078 /*data_ptr*/param_buf, 4079 /*dxfer_len*/param_len, 4080 sense_len, 4081 cdb_len, 4082 timeout); 4083 } 4084 4085 void 4086 scsi_log_select(struct ccb_scsiio *csio, u_int32_t retries, 4087 void (*cbfcnp)(struct cam_periph *, union ccb *), 4088 u_int8_t tag_action, u_int8_t page_code, int save_pages, 4089 int pc_reset, u_int8_t *param_buf, u_int32_t param_len, 4090 u_int8_t sense_len, u_int32_t timeout) 4091 { 4092 struct scsi_log_select *scsi_cmd; 4093 u_int8_t cdb_len; 4094 4095 scsi_cmd = (struct scsi_log_select *)&csio->cdb_io.cdb_bytes; 4096 bzero(scsi_cmd, sizeof(*scsi_cmd)); 4097 scsi_cmd->opcode = LOG_SELECT; 4098 scsi_cmd->page = page_code & SLS_PAGE_CODE; 4099 if (save_pages != 0) 4100 scsi_cmd->byte2 |= SLS_SP; 4101 if (pc_reset != 0) 4102 scsi_cmd->byte2 |= SLS_PCR; 4103 scsi_ulto2b(param_len, scsi_cmd->length); 4104 cdb_len = sizeof(*scsi_cmd); 4105 4106 cam_fill_csio(csio, 4107 retries, 4108 cbfcnp, 4109 /*flags*/CAM_DIR_OUT, 4110 tag_action, 4111 /*data_ptr*/param_buf, 4112 /*dxfer_len*/param_len, 4113 sense_len, 4114 cdb_len, 4115 timeout); 4116 } 4117 4118 /* 4119 * Try make as good a match as possible with 4120 * available sub drivers 4121 */ 4122 int 4123 scsi_inquiry_match(caddr_t inqbuffer, caddr_t table_entry) 4124 { 4125 struct scsi_inquiry_pattern *entry; 4126 struct scsi_inquiry_data *inq; 4127 4128 entry = (struct scsi_inquiry_pattern *)table_entry; 4129 inq = (struct scsi_inquiry_data *)inqbuffer; 4130 4131 if (((SID_TYPE(inq) == entry->type) 4132 || (entry->type == T_ANY)) 4133 && (SID_IS_REMOVABLE(inq) ? entry->media_type & SIP_MEDIA_REMOVABLE 4134 : entry->media_type & SIP_MEDIA_FIXED) 4135 && (cam_strmatch(inq->vendor, entry->vendor, sizeof(inq->vendor)) == 0) 4136 && (cam_strmatch(inq->product, entry->product, 4137 sizeof(inq->product)) == 0) 4138 && (cam_strmatch(inq->revision, entry->revision, 4139 sizeof(inq->revision)) == 0)) { 4140 return (0); 4141 } 4142 return (-1); 4143 } 4144 4145 #ifdef _KERNEL 4146 static void 4147 init_scsi_delay(void) 4148 { 4149 int delay; 4150 4151 delay = SCSI_DELAY; 4152 TUNABLE_INT_FETCH("kern.cam.scsi_delay", &delay); 4153 4154 if (set_scsi_delay(delay) != 0) { 4155 kprintf("cam: invalid value for tunable kern.cam.scsi_delay\n"); 4156 set_scsi_delay(SCSI_DELAY); 4157 } 4158 } 4159 SYSINIT(scsi_delay, SI_BOOT1_TUNABLES, SI_ORDER_ANY, init_scsi_delay, NULL); 4160 4161 static int 4162 sysctl_scsi_delay(SYSCTL_HANDLER_ARGS) 4163 { 4164 int error, delay; 4165 4166 delay = scsi_delay; 4167 error = sysctl_handle_int(oidp, &delay, 0, req); 4168 if (error != 0 || req->newptr == NULL) 4169 return (error); 4170 return (set_scsi_delay(delay)); 4171 } 4172 SYSCTL_PROC(_kern_cam, OID_AUTO, scsi_delay, CTLTYPE_INT|CTLFLAG_RW, 4173 0, 0, sysctl_scsi_delay, "I", 4174 "Delay to allow devices to settle after a SCSI bus reset (ms)"); 4175 4176 static int 4177 set_scsi_delay(int delay) 4178 { 4179 /* 4180 * If someone sets this to 0, we assume that they want the 4181 * minimum allowable bus settle delay. 4182 */ 4183 if (delay == 0) { 4184 kprintf("cam: using minimum scsi_delay (%dms)\n", 4185 SCSI_MIN_DELAY); 4186 delay = SCSI_MIN_DELAY; 4187 } 4188 if (delay < SCSI_MIN_DELAY) 4189 return (EINVAL); 4190 scsi_delay = delay; 4191 return (0); 4192 } 4193 #endif /* _KERNEL */ 4194 4195 /* 4196 * Try make as good a match as possible with 4197 * available sub drivers 4198 */ 4199 int 4200 scsi_static_inquiry_match(caddr_t inqbuffer, caddr_t table_entry) 4201 { 4202 struct scsi_static_inquiry_pattern *entry; 4203 struct scsi_inquiry_data *inq; 4204 4205 entry = (struct scsi_static_inquiry_pattern *)table_entry; 4206 inq = (struct scsi_inquiry_data *)inqbuffer; 4207 4208 if (((SID_TYPE(inq) == entry->type) 4209 || (entry->type == T_ANY)) 4210 && (SID_IS_REMOVABLE(inq) ? entry->media_type & SIP_MEDIA_REMOVABLE 4211 : entry->media_type & SIP_MEDIA_FIXED) 4212 && (cam_strmatch(inq->vendor, entry->vendor, sizeof(inq->vendor)) == 0) 4213 && (cam_strmatch(inq->product, entry->product, 4214 sizeof(inq->product)) == 0) 4215 && (cam_strmatch(inq->revision, entry->revision, 4216 sizeof(inq->revision)) == 0)) { 4217 return (0); 4218 } 4219 return (-1); 4220 } 4221