xref: /dragonfly/sys/bus/pci/pcivar.h (revision 5de36205)
1 /*
2  * Copyright (c) 1997, Stefan Esser <se@freebsd.org>
3  * All rights reserved.
4  *
5  * Redistribution and use in source and binary forms, with or without
6  * modification, are permitted provided that the following conditions
7  * are met:
8  * 1. Redistributions of source code must retain the above copyright
9  *    notice unmodified, this list of conditions, and the following
10  *    disclaimer.
11  * 2. Redistributions in binary form must reproduce the above copyright
12  *    notice, this list of conditions and the following disclaimer in the
13  *    documentation and/or other materials provided with the distribution.
14  *
15  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
16  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
17  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
18  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
19  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
20  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
21  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
22  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
23  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
24  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
25  *
26  * $FreeBSD: src/sys/pci/pcivar.h,v 1.48 2000/09/28 00:37:32 peter Exp $
27  * $DragonFly: src/sys/bus/pci/pcivar.h,v 1.9 2005/06/16 21:12:25 dillon Exp $
28  *
29  */
30 
31 #ifndef _PCIVAR_H_
32 #define _PCIVAR_H_
33 
34 #include <sys/queue.h>
35 
36 /* some PCI bus constants */
37 
38 #define PCI_BUSMAX	255	/* highest supported bus number */
39 #define PCI_SLOTMAX	31	/* highest supported slot number */
40 #define PCI_FUNCMAX	7	/* highest supported function number */
41 #define PCI_REGMAX	255	/* highest supported config register addr. */
42 
43 #define PCI_MAXMAPS_0	6	/* max. no. of memory/port maps */
44 #define PCI_MAXMAPS_1	2	/* max. no. of maps for PCI to PCI bridge */
45 #define PCI_MAXMAPS_2	1	/* max. no. of maps for CardBus bridge */
46 
47 /* pci_addr_t covers this system's PCI bus address space: 32 or 64 bit */
48 
49 #ifdef PCI_A64
50 typedef u_int64_t pci_addr_t;	/* u_int64_t for system with 64bit addresses */
51 #else
52 typedef u_int32_t pci_addr_t;	/* u_int64_t for system with 64bit addresses */
53 #endif
54 
55 /* config header information common to all header types */
56 
57 typedef struct pcicfg {
58     struct device *dev;		/* device which owns this */
59     void	*hdrspec;	/* pointer to header type specific data */
60 
61     u_int16_t	subvendor;	/* card vendor ID */
62     u_int16_t	subdevice;	/* card device ID, assigned by card vendor */
63     u_int16_t	vendor;		/* chip vendor ID */
64     u_int16_t	device;		/* chip device ID, assigned by chip vendor */
65 
66     u_int16_t	cmdreg;		/* disable/enable chip and PCI options */
67     u_int16_t	statreg;	/* supported PCI features and error state */
68 
69     u_int8_t	baseclass;	/* chip PCI class */
70     u_int8_t	subclass;	/* chip PCI subclass */
71     u_int8_t	progif;		/* chip PCI programming interface */
72     u_int8_t	revid;		/* chip revision ID */
73 
74     u_int8_t	hdrtype;	/* chip config header type */
75     u_int8_t	cachelnsz;	/* cache line size in 4byte units */
76     u_int8_t	intpin;		/* PCI interrupt pin */
77     u_int8_t	intline;	/* interrupt line (IRQ for PC arch) */
78 
79     u_int8_t	mingnt;		/* min. useful bus grant time in 250ns units */
80     u_int8_t	maxlat;		/* max. tolerated bus grant latency in 250ns */
81     u_int8_t	lattimer;	/* latency timer in units of 30ns bus cycles */
82 
83     u_int8_t	mfdev;		/* multi-function device (from hdrtype reg) */
84     u_int8_t	nummaps;	/* actual number of PCI maps used */
85 
86     u_int8_t	bus;		/* config space bus address */
87     u_int8_t	slot;		/* config space slot address */
88     u_int8_t	func;		/* config space function number */
89 
90     u_int8_t	secondarybus;	/* bus on secondary side of bridge, if any */
91     u_int8_t	subordinatebus;	/* topmost bus number behind bridge, if any */
92 
93     u_int16_t	pp_cap;		/* PCI power management capabilities */
94     u_int8_t	pp_status;	/* config space address of PCI power status reg */
95     u_int8_t	pp_pmcsr;	/* config space address of PMCSR reg */
96     u_int8_t	pp_data;	/* config space address of PCI power data reg */
97 } pcicfgregs;
98 
99 /* additional type 1 device config header information (PCI to PCI bridge) */
100 
101 #ifdef PCI_A64
102 #define PCI_PPBMEMBASE(h,l)  ((((pci_addr_t)(h) << 32) + ((l)<<16)) & ~0xfffff)
103 #define PCI_PPBMEMLIMIT(h,l) ((((pci_addr_t)(h) << 32) + ((l)<<16)) | 0xfffff)
104 #else
105 #define PCI_PPBMEMBASE(h,l)  (((l)<<16) & ~0xfffff)
106 #define PCI_PPBMEMLIMIT(h,l) (((l)<<16) | 0xfffff)
107 #endif /* PCI_A64 */
108 
109 #define PCI_PPBIOBASE(h,l)   ((((h)<<16) + ((l)<<8)) & ~0xfff)
110 #define PCI_PPBIOLIMIT(h,l)  ((((h)<<16) + ((l)<<8)) | 0xfff)
111 
112 typedef struct {
113     pci_addr_t	pmembase;	/* base address of prefetchable memory */
114     pci_addr_t	pmemlimit;	/* topmost address of prefetchable memory */
115     u_int32_t	membase;	/* base address of memory window */
116     u_int32_t	memlimit;	/* topmost address of memory window */
117     u_int32_t	iobase;		/* base address of port window */
118     u_int32_t	iolimit;	/* topmost address of port window */
119     u_int16_t	secstat;	/* secondary bus status register */
120     u_int16_t	bridgectl;	/* bridge control register */
121     u_int8_t	seclat;		/* CardBus latency timer */
122 } pcih1cfgregs;
123 
124 /* additional type 2 device config header information (CardBus bridge) */
125 
126 typedef struct {
127     u_int32_t	membase0;	/* base address of memory window */
128     u_int32_t	memlimit0;	/* topmost address of memory window */
129     u_int32_t	membase1;	/* base address of memory window */
130     u_int32_t	memlimit1;	/* topmost address of memory window */
131     u_int32_t	iobase0;	/* base address of port window */
132     u_int32_t	iolimit0;	/* topmost address of port window */
133     u_int32_t	iobase1;	/* base address of port window */
134     u_int32_t	iolimit1;	/* topmost address of port window */
135     u_int32_t	pccardif;	/* PC Card 16bit IF legacy more base addr. */
136     u_int16_t	secstat;	/* secondary bus status register */
137     u_int16_t	bridgectl;	/* bridge control register */
138     u_int8_t	seclat;		/* CardBus latency timer */
139 } pcih2cfgregs;
140 
141 extern u_int32_t pci_numdevs;
142 
143 /* Only if the prerequisites are present */
144 #if defined(_SYS_BUS_H_) && defined(_SYS_PCIIO_H_)
145 struct pci_devinfo {
146         STAILQ_ENTRY(pci_devinfo) pci_links;
147 	struct resource_list resources;
148 	pcicfgregs		cfg;
149 	struct pci_conf		conf;
150 };
151 #endif
152 
153 /* externally visible functions */
154 
155 const char *pci_ata_match(struct device *dev);
156 const char *pci_usb_match(struct device *dev);
157 const char *pci_vga_match(struct device *dev);
158 const char *pci_chip_match(struct device *dev);
159 
160 /* low level PCI config register functions provided by pcibus.c */
161 
162 int pci_cfgread (pcicfgregs *cfg, int reg, int bytes);
163 void pci_cfgwrite (pcicfgregs *cfg, int reg, int data, int bytes);
164 
165 /* low level devlist operations for the 2.2 compatibility code in pci.c */
166 pcicfgregs * pci_devlist_get_parent(pcicfgregs *cfg);
167 
168 #ifdef _SYS_BUS_H_
169 
170 #include "pci_if.h"
171 
172 /*
173  * Define pci-specific resource flags for accessing memory via dense
174  * or bwx memory spaces. These flags are ignored on i386.
175  */
176 #define PCI_RF_DENSE	0x10000
177 #define PCI_RF_BWX	0x20000
178 
179 enum pci_device_ivars {
180 	PCI_IVAR_SUBVENDOR,
181 	PCI_IVAR_SUBDEVICE,
182 	PCI_IVAR_VENDOR,
183 	PCI_IVAR_DEVICE,
184 	PCI_IVAR_DEVID,
185 	PCI_IVAR_CLASS,
186 	PCI_IVAR_SUBCLASS,
187 	PCI_IVAR_PROGIF,
188 	PCI_IVAR_REVID,
189 	PCI_IVAR_INTPIN,
190 	PCI_IVAR_IRQ,
191 	PCI_IVAR_BUS,
192 	PCI_IVAR_SLOT,
193 	PCI_IVAR_FUNCTION,
194 	PCI_IVAR_SECONDARYBUS,
195 	PCI_IVAR_SUBORDINATEBUS,
196 	PCI_IVAR_ETHADDR,
197 };
198 
199 /*
200  * Simplified accessors for pci devices
201  */
202 #define PCI_ACCESSOR(A, B, T)						\
203 									\
204 static __inline T pci_get_ ## A(device_t dev)				\
205 {									\
206 	uintptr_t v;							\
207 	BUS_READ_IVAR(device_get_parent(dev), dev, PCI_IVAR_ ## B, &v);	\
208 	return (T) v;							\
209 }									\
210 									\
211 static __inline void pci_set_ ## A(device_t dev, T t)			\
212 {									\
213 	uintptr_t v = (uintptr_t) t;						\
214 	BUS_WRITE_IVAR(device_get_parent(dev), dev, PCI_IVAR_ ## B, v);	\
215 }
216 
217 PCI_ACCESSOR(subvendor,		SUBVENDOR,	u_int16_t)
218 PCI_ACCESSOR(subdevice,		SUBDEVICE,	u_int16_t)
219 PCI_ACCESSOR(vendor,		VENDOR,		u_int16_t)
220 PCI_ACCESSOR(device,		DEVICE,		u_int16_t)
221 PCI_ACCESSOR(devid,		DEVID,		u_int32_t)
222 PCI_ACCESSOR(class,		CLASS,		u_int8_t)
223 PCI_ACCESSOR(subclass,		SUBCLASS,	u_int8_t)
224 PCI_ACCESSOR(progif,		PROGIF,		u_int8_t)
225 PCI_ACCESSOR(revid,		REVID,		u_int8_t)
226 PCI_ACCESSOR(intpin,		INTPIN,		u_int8_t)
227 PCI_ACCESSOR(irq,		IRQ,		u_int8_t)
228 PCI_ACCESSOR(bus,		BUS,		u_int8_t)
229 PCI_ACCESSOR(slot,		SLOT,		u_int8_t)
230 PCI_ACCESSOR(function,		FUNCTION,	u_int8_t)
231 PCI_ACCESSOR(secondarybus,	SECONDARYBUS,	u_int8_t)
232 PCI_ACCESSOR(subordinatebus,	SUBORDINATEBUS,	u_int8_t)
233 PCI_ACCESSOR(ether,		ETHADDR,	uint8_t *)
234 
235 #undef PCI_ACCESSOR
236 
237 static __inline u_int32_t
238 pci_read_config(device_t dev, int reg, int width)
239 {
240     return PCI_READ_CONFIG(device_get_parent(dev), dev, reg, width);
241 }
242 
243 static __inline void
244 pci_write_config(device_t dev, int reg, u_int32_t val, int width)
245 {
246     PCI_WRITE_CONFIG(device_get_parent(dev), dev, reg, val, width);
247 }
248 
249 /*
250  * Convenience functions.
251  *
252  * These should be used in preference to manually manipulating
253  * configuration space.
254  */
255 static __inline void
256 pci_enable_busmaster(device_t dev)
257 {
258     PCI_ENABLE_BUSMASTER(device_get_parent(dev), dev);
259 }
260 
261 static __inline void
262 pci_disable_busmaster(device_t dev)
263 {
264     PCI_DISABLE_BUSMASTER(device_get_parent(dev), dev);
265 }
266 
267 static __inline void
268 pci_enable_io(device_t dev, int space)
269 {
270     PCI_ENABLE_IO(device_get_parent(dev), dev, space);
271 }
272 
273 static __inline void
274 pci_disable_io(device_t dev, int space)
275 {
276     PCI_DISABLE_IO(device_get_parent(dev), dev, space);
277 }
278 
279 /*
280  * PCI power states are as defined by ACPI:
281  *
282  * D0	State in which device is on and running.  It is receiving full
283  *	power from the system and delivering full functionality to the user.
284  * D1	Class-specific low-power state in which device context may or may not
285  *	be lost.  Buses in D1 cannot do anything to the bus that would force
286  *	devices on that bus to loose context.
287  * D2	Class-specific low-power state in which device context may or may
288  *	not be lost.  Attains greater power savings than D1.  Buses in D2
289  *	can cause devices on that bus to loose some context.  Devices in D2
290  *	must be prepared for the bus to be in D2 or higher.
291  * D3	State in which the device is off and not running.  Device context is
292  *	lost.  Power can be removed from the device.
293  */
294 #define PCI_POWERSTATE_D0	0
295 #define PCI_POWERSTATE_D1	1
296 #define PCI_POWERSTATE_D2	2
297 #define PCI_POWERSTATE_D3	3
298 #define PCI_POWERSTATE_UNKNOWN	-1
299 
300 static __inline int
301 pci_set_powerstate(device_t dev, int state)
302 {
303     return PCI_SET_POWERSTATE(device_get_parent(dev), dev, state);
304 }
305 
306 static __inline int
307 pci_get_powerstate(device_t dev)
308 {
309     return PCI_GET_POWERSTATE(device_get_parent(dev), dev);
310 }
311 
312 /*
313  * Ivars for pci bridges.
314  */
315 
316 /*typedef enum pci_device_ivars pcib_device_ivars;*/
317 enum pcib_device_ivars {
318 	PCIB_IVAR_BUS,
319 };
320 
321 #define PCIB_ACCESSOR(A, B, T)						 \
322 									 \
323 static __inline T pcib_get_ ## A(device_t dev)				 \
324 {									 \
325 	uintptr_t v;							 \
326 	BUS_READ_IVAR(device_get_parent(dev), dev, PCIB_IVAR_ ## B, &v); \
327 	return (T) v;							 \
328 }									 \
329 									 \
330 static __inline void pcib_set_ ## A(device_t dev, T t)			 \
331 {									 \
332 	uintptr_t v = (uintptr_t) t;						 \
333 	BUS_WRITE_IVAR(device_get_parent(dev), dev, PCIB_IVAR_ ## B, v); \
334 }
335 
336 PCIB_ACCESSOR(bus,		BUS,		u_int32_t)
337 
338 #undef PCIB_ACCESSOR
339 
340 device_t pci_find_bsf(u_int8_t, u_int8_t, u_int8_t);
341 device_t pci_find_device(u_int16_t, u_int16_t);
342 #endif
343 
344 /* for compatibility to FreeBSD-2.2 and 3.x versions of PCI code */
345 
346 #if defined(_KERNEL) && !defined(KLD_MODULE)
347 #include "opt_compat_oldpci.h"
348 #endif
349 
350 #ifdef COMPAT_OLDPCI
351 /* all this is going some day */
352 
353 typedef pcicfgregs *pcici_t;
354 typedef unsigned pcidi_t;
355 typedef void pci_inthand_t(void *arg);
356 
357 #define pci_max_burst_len (3)
358 
359 /* just copied from old PCI code for now ... */
360 
361 struct pci_device {
362     char*    pd_name;
363     const char*  (*pd_probe ) (pcici_t tag, pcidi_t type);
364     void   (*pd_attach) (pcici_t tag, int     unit);
365     u_long  *pd_count;
366     int    (*pd_shutdown) (int, int);
367 };
368 
369 #ifdef __i386__
370 typedef u_short pci_port_t;
371 #else
372 typedef u_int pci_port_t;
373 #endif
374 
375 u_long pci_conf_read (pcici_t tag, u_long reg);
376 void pci_conf_write (pcici_t tag, u_long reg, u_long data);
377 int pci_map_port (pcici_t tag, u_long reg, pci_port_t* pa);
378 int pci_map_mem (pcici_t tag, u_long reg, vm_offset_t* va, vm_offset_t* pa);
379 int pci_map_int (pcici_t tag, pci_inthand_t *handler, void *arg);
380 int pci_map_int_right(pcici_t cfg, pci_inthand_t *handler, void *arg,
381 		      u_int flags);
382 int pci_unmap_int (pcici_t tag);
383 
384 pcici_t pci_get_parent_from_tag(pcici_t tag);
385 int     pci_get_bus_from_tag(pcici_t tag);
386 
387 struct module;
388 int compat_pci_handler (struct module *, int, void *);
389 #define COMPAT_PCI_DRIVER(name, pcidata)				\
390 static moduledata_t name##_mod = {					\
391 	#name,								\
392 	compat_pci_handler,						\
393 	&pcidata							\
394 };									\
395 DECLARE_MODULE(name, name##_mod, SI_SUB_DRIVERS, SI_ORDER_ANY)
396 
397 
398 #endif /* COMPAT_OLDPCI */
399 #endif /* _PCIVAR_H_ */
400