1 /*- 2 * Copyright (c) 1998 The NetBSD Foundation, Inc. 3 * All rights reserved. 4 * 5 * This code is derived from software contributed to The NetBSD Foundation 6 * by Lennart Augustsson (augustss@carlstedt.se) at 7 * Carlstedt Research & Technology. 8 * 9 * Redistribution and use in source and binary forms, with or without 10 * modification, are permitted provided that the following conditions 11 * are met: 12 * 1. Redistributions of source code must retain the above copyright 13 * notice, this list of conditions and the following disclaimer. 14 * 2. Redistributions in binary form must reproduce the above copyright 15 * notice, this list of conditions and the following disclaimer in the 16 * documentation and/or other materials provided with the distribution. 17 * 18 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 19 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 20 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 21 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 22 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 23 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 24 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 25 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 26 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 27 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 28 * POSSIBILITY OF SUCH DAMAGE. 29 */ 30 31 /* 32 * USB Open Host Controller driver. 33 * 34 * OHCI spec: http://www.intel.com/design/usb/ohci11d.pdf 35 */ 36 37 /* The low level controller code for OHCI has been split into 38 * PCI probes and OHCI specific code. This was done to facilitate the 39 * sharing of code between *BSD's 40 */ 41 42 #include <sys/stdint.h> 43 #include <sys/param.h> 44 #include <sys/queue.h> 45 #include <sys/types.h> 46 #include <sys/systm.h> 47 #include <sys/kernel.h> 48 #include <sys/bus.h> 49 #include <sys/module.h> 50 #include <sys/lock.h> 51 #include <sys/condvar.h> 52 #include <sys/sysctl.h> 53 #include <sys/unistd.h> 54 #include <sys/callout.h> 55 #include <sys/malloc.h> 56 #include <sys/priv.h> 57 58 #include <bus/u4b/usb.h> 59 #include <bus/u4b/usbdi.h> 60 61 #include <bus/u4b/usb_core.h> 62 #include <bus/u4b/usb_busdma.h> 63 #include <bus/u4b/usb_process.h> 64 #include <bus/u4b/usb_util.h> 65 66 #include <bus/u4b/usb_controller.h> 67 #include <bus/u4b/usb_bus.h> 68 #include <bus/u4b/usb_pci.h> 69 #include <bus/u4b/controller/ohci.h> 70 #include <bus/u4b/controller/ohcireg.h> 71 #include "usb_if.h" 72 73 #define PCI_OHCI_VENDORID_ACERLABS 0x10b9 74 #define PCI_OHCI_VENDORID_AMD 0x1022 75 #define PCI_OHCI_VENDORID_APPLE 0x106b 76 #define PCI_OHCI_VENDORID_ATI 0x1002 77 #define PCI_OHCI_VENDORID_CMDTECH 0x1095 78 #define PCI_OHCI_VENDORID_NEC 0x1033 79 #define PCI_OHCI_VENDORID_NVIDIA 0x12D2 80 #define PCI_OHCI_VENDORID_NVIDIA2 0x10DE 81 #define PCI_OHCI_VENDORID_OPTI 0x1045 82 #define PCI_OHCI_VENDORID_SIS 0x1039 83 #define PCI_OHCI_VENDORID_SUN 0x108e 84 85 #define PCI_OHCI_BASE_REG 0x10 86 87 static device_probe_t ohci_pci_probe; 88 static device_attach_t ohci_pci_attach; 89 static device_detach_t ohci_pci_detach; 90 static usb_take_controller_t ohci_pci_take_controller; 91 92 static int 93 ohci_pci_take_controller(device_t self) 94 { 95 uint32_t reg; 96 uint32_t int_line; 97 98 if (pci_get_powerstate(self) != PCI_POWERSTATE_D0) { 99 device_printf(self, "chip is in D%d mode " 100 "-- setting to D0\n", pci_get_powerstate(self)); 101 reg = pci_read_config(self, PCI_CBMEM, 4); 102 int_line = pci_read_config(self, PCIR_INTLINE, 4); 103 pci_set_powerstate(self, PCI_POWERSTATE_D0); 104 pci_write_config(self, PCI_CBMEM, reg, 4); 105 pci_write_config(self, PCIR_INTLINE, int_line, 4); 106 } 107 return (0); 108 } 109 110 static const char * 111 ohci_pci_match(device_t self) 112 { 113 uint32_t device_id = pci_get_devid(self); 114 115 switch (device_id) { 116 case 0x523710b9: 117 return ("AcerLabs M5237 (Aladdin-V) USB controller"); 118 119 case 0x740c1022: 120 return ("AMD-756 USB Controller"); 121 122 case 0x74141022: 123 return ("AMD-766 USB Controller"); 124 125 case 0x43741002: 126 return "ATI SB400 USB Controller"; 127 case 0x43751002: 128 return "ATI SB400 USB Controller"; 129 case 0x43971002: 130 return ("AMD SB7x0/SB8x0/SB9x0 USB controller"); 131 case 0x43981002: 132 return ("AMD SB7x0/SB8x0/SB9x0 USB controller"); 133 case 0x43991002: 134 return ("AMD SB7x0/SB8x0/SB9x0 USB controller"); 135 136 case 0x06701095: 137 return ("CMD Tech 670 (USB0670) USB controller"); 138 139 case 0x06731095: 140 return ("CMD Tech 673 (USB0673) USB controller"); 141 142 case 0xc8611045: 143 return ("OPTi 82C861 (FireLink) USB controller"); 144 145 case 0x00351033: 146 return ("NEC uPD 9210 USB controller"); 147 148 case 0x00d710de: 149 return ("nVidia nForce3 USB Controller"); 150 151 case 0x005a10de: 152 return ("nVidia nForce CK804 USB Controller"); 153 case 0x036c10de: 154 return ("nVidia nForce MCP55 USB Controller"); 155 case 0x03f110de: 156 return ("nVidia nForce MCP61 USB Controller"); 157 case 0x0aa510de: 158 return ("nVidia nForce MCP79 USB Controller"); 159 case 0x0aa710de: 160 return ("nVidia nForce MCP79 USB Controller"); 161 case 0x0aa810de: 162 return ("nVidia nForce MCP79 USB Controller"); 163 164 case 0x70011039: 165 return ("SiS 5571 USB controller"); 166 167 case 0x1103108e: 168 return "Sun PCIO-2 USB controller"; 169 170 case 0x0019106b: 171 return ("Apple KeyLargo USB controller"); 172 case 0x003f106b: 173 return ("Apple KeyLargo/Intrepid USB controller"); 174 175 default: 176 break; 177 } 178 if ((pci_get_class(self) == PCIC_SERIALBUS) && 179 (pci_get_subclass(self) == PCIS_SERIALBUS_USB) && 180 (pci_get_progif(self) == PCI_INTERFACE_OHCI)) { 181 return ("OHCI (generic) USB controller"); 182 } 183 return (NULL); 184 } 185 186 static int 187 ohci_pci_probe(device_t self) 188 { 189 const char *desc = ohci_pci_match(self); 190 191 if (desc) { 192 device_set_desc(self, desc); 193 return (0); 194 } else { 195 return (ENXIO); 196 } 197 } 198 199 static int 200 ohci_pci_attach(device_t self) 201 { 202 ohci_softc_t *sc = device_get_softc(self); 203 int rid; 204 int err; 205 206 /* initialise some bus fields */ 207 sc->sc_bus.parent = self; 208 sc->sc_bus.devices = sc->sc_devices; 209 sc->sc_bus.devices_max = OHCI_MAX_DEVICES; 210 sc->sc_bus.dma_bits = 32; 211 212 /* get all DMA memory */ 213 if (usb_bus_mem_alloc_all(&sc->sc_bus, USB_GET_DMA_TAG(self), 214 &ohci_iterate_hw_softc)) { 215 return (ENOMEM); 216 } 217 sc->sc_dev = self; 218 219 pci_enable_busmaster(self); 220 221 /* 222 * Some Sun PCIO-2 USB controllers have their intpin register 223 * bogusly set to 0, although it should be 4. Correct that. 224 */ 225 if (pci_get_devid(self) == 0x1103108e && pci_get_intpin(self) == 0) 226 pci_set_intpin(self, 4); 227 228 rid = PCI_CBMEM; 229 sc->sc_io_res = bus_alloc_resource_any(self, SYS_RES_MEMORY, &rid, 230 RF_ACTIVE); 231 if (!sc->sc_io_res) { 232 device_printf(self, "Could not map memory\n"); 233 goto error; 234 } 235 sc->sc_io_tag = rman_get_bustag(sc->sc_io_res); 236 sc->sc_io_hdl = rman_get_bushandle(sc->sc_io_res); 237 sc->sc_io_size = rman_get_size(sc->sc_io_res); 238 239 rid = 0; 240 sc->sc_irq_res = bus_alloc_resource_any(self, SYS_RES_IRQ, &rid, 241 RF_SHAREABLE | RF_ACTIVE); 242 if (sc->sc_irq_res == NULL) { 243 device_printf(self, "Could not allocate irq\n"); 244 goto error; 245 } 246 sc->sc_bus.bdev = device_add_child(self, "usbus", -1); 247 if (!sc->sc_bus.bdev) { 248 device_printf(self, "Could not add USB device\n"); 249 goto error; 250 } 251 device_set_ivars(sc->sc_bus.bdev, &sc->sc_bus); 252 253 /* 254 * ohci_pci_match will never return NULL if ohci_pci_probe 255 * succeeded 256 */ 257 device_set_desc(sc->sc_bus.bdev, ohci_pci_match(self)); 258 switch (pci_get_vendor(self)) { 259 case PCI_OHCI_VENDORID_ACERLABS: 260 ksprintf(sc->sc_vendor, "AcerLabs"); 261 break; 262 case PCI_OHCI_VENDORID_AMD: 263 ksprintf(sc->sc_vendor, "AMD"); 264 break; 265 case PCI_OHCI_VENDORID_APPLE: 266 ksprintf(sc->sc_vendor, "Apple"); 267 break; 268 case PCI_OHCI_VENDORID_ATI: 269 ksprintf(sc->sc_vendor, "ATI"); 270 break; 271 case PCI_OHCI_VENDORID_CMDTECH: 272 ksprintf(sc->sc_vendor, "CMDTECH"); 273 break; 274 case PCI_OHCI_VENDORID_NEC: 275 ksprintf(sc->sc_vendor, "NEC"); 276 break; 277 case PCI_OHCI_VENDORID_NVIDIA: 278 case PCI_OHCI_VENDORID_NVIDIA2: 279 ksprintf(sc->sc_vendor, "nVidia"); 280 break; 281 case PCI_OHCI_VENDORID_OPTI: 282 ksprintf(sc->sc_vendor, "OPTi"); 283 break; 284 case PCI_OHCI_VENDORID_SIS: 285 ksprintf(sc->sc_vendor, "SiS"); 286 break; 287 case PCI_OHCI_VENDORID_SUN: 288 ksprintf(sc->sc_vendor, "SUN"); 289 break; 290 default: 291 if (bootverbose) { 292 device_printf(self, "(New OHCI DeviceId=0x%08x)\n", 293 pci_get_devid(self)); 294 } 295 ksprintf(sc->sc_vendor, "(0x%04x)", pci_get_vendor(self)); 296 } 297 298 /* sc->sc_bus.usbrev; set by ohci_init() */ 299 300 err = bus_setup_intr(self, sc->sc_irq_res, INTR_MPSAFE, 301 (driver_intr_t *)ohci_interrupt, sc, &sc->sc_intr_hdl, NULL); 302 if (err) { 303 device_printf(self, "Could not setup irq, %d\n", err); 304 sc->sc_intr_hdl = NULL; 305 goto error; 306 } 307 err = ohci_init(sc); 308 if (!err) { 309 err = device_probe_and_attach(sc->sc_bus.bdev); 310 } 311 if (err) { 312 device_printf(self, "USB init failed\n"); 313 goto error; 314 } 315 return (0); 316 317 error: 318 ohci_pci_detach(self); 319 return (ENXIO); 320 } 321 322 static int 323 ohci_pci_detach(device_t self) 324 { 325 ohci_softc_t *sc = device_get_softc(self); 326 device_t bdev; 327 328 if (sc->sc_bus.bdev) { 329 bdev = sc->sc_bus.bdev; 330 device_detach(bdev); 331 device_delete_child(self, bdev); 332 } 333 /* during module unload there are lots of children leftover */ 334 device_delete_children(self); 335 336 pci_disable_busmaster(self); 337 338 if (sc->sc_irq_res && sc->sc_intr_hdl) { 339 /* 340 * only call ohci_detach() after ohci_init() 341 */ 342 ohci_detach(sc); 343 344 int err = bus_teardown_intr(self, sc->sc_irq_res, sc->sc_intr_hdl); 345 346 if (err) { 347 /* XXX or should we panic? */ 348 device_printf(self, "Could not tear down irq, %d\n", 349 err); 350 } 351 sc->sc_intr_hdl = NULL; 352 } 353 if (sc->sc_irq_res) { 354 bus_release_resource(self, SYS_RES_IRQ, 0, sc->sc_irq_res); 355 sc->sc_irq_res = NULL; 356 } 357 if (sc->sc_io_res) { 358 bus_release_resource(self, SYS_RES_MEMORY, PCI_CBMEM, 359 sc->sc_io_res); 360 sc->sc_io_res = NULL; 361 } 362 usb_bus_mem_free_all(&sc->sc_bus, &ohci_iterate_hw_softc); 363 364 return (0); 365 } 366 367 static device_method_t ohci_pci_methods[] = { 368 /* Device interface */ 369 DEVMETHOD(device_probe, ohci_pci_probe), 370 DEVMETHOD(device_attach, ohci_pci_attach), 371 DEVMETHOD(device_detach, ohci_pci_detach), 372 DEVMETHOD(device_suspend, bus_generic_suspend), 373 DEVMETHOD(device_resume, bus_generic_resume), 374 DEVMETHOD(device_shutdown, bus_generic_shutdown), 375 DEVMETHOD(usb_take_controller, ohci_pci_take_controller), 376 377 DEVMETHOD_END 378 }; 379 380 static driver_t ohci_driver = { 381 .name = "ohci", 382 .methods = ohci_pci_methods, 383 .size = sizeof(struct ohci_softc), 384 }; 385 386 static devclass_t ohci_devclass; 387 388 DRIVER_MODULE(ohci, pci, ohci_driver, ohci_devclass, NULL, NULL); 389 MODULE_DEPEND(ohci, usb, 1, 1, 1); 390