1 /* $FreeBSD: head/sys/dev/usb/controller/uhci.h 228483 2011-12-14 00:28:54Z hselasky $ */ 2 /*- 3 * Copyright (c) 1998 The NetBSD Foundation, Inc. 4 * All rights reserved. 5 * 6 * This code is derived from software contributed to The NetBSD Foundation 7 * by Lennart Augustsson (lennart@augustsson.net) at 8 * Carlstedt Research & Technology. 9 * 10 * Redistribution and use in source and binary forms, with or without 11 * modification, are permitted provided that the following conditions 12 * are met: 13 * 1. Redistributions of source code must retain the above copyright 14 * notice, this list of conditions and the following disclaimer. 15 * 2. Redistributions in binary form must reproduce the above copyright 16 * notice, this list of conditions and the following disclaimer in the 17 * documentation and/or other materials provided with the distribution. 18 * 19 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 20 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 21 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 22 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 23 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 24 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 25 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 26 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 27 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 28 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 29 * POSSIBILITY OF SUCH DAMAGE. 30 */ 31 32 #ifndef _UHCI_H_ 33 #define _UHCI_H_ 34 35 #define UHCI_MAX_DEVICES MIN(USB_MAX_DEVICES, 128) 36 37 #define UHCI_FRAMELIST_COUNT 1024 /* units */ 38 #define UHCI_FRAMELIST_ALIGN 4096 /* bytes */ 39 40 /* Structures alignment (bytes) */ 41 #define UHCI_TD_ALIGN 16 42 #define UHCI_QH_ALIGN 16 43 44 #if ((USB_PAGE_SIZE < UHCI_TD_ALIGN) || (UHCI_TD_ALIGN == 0) || \ 45 (USB_PAGE_SIZE < UHCI_QH_ALIGN) || (UHCI_QH_ALIGN == 0)) 46 #error "Invalid USB page size!" 47 #endif 48 49 typedef uint32_t uhci_physaddr_t; 50 51 #define UHCI_PTR_T 0x00000001 52 #define UHCI_PTR_TD 0x00000000 53 #define UHCI_PTR_QH 0x00000002 54 #define UHCI_PTR_VF 0x00000004 55 56 /* 57 * The Queue Heads (QH) and Transfer Descriptors (TD) are accessed by 58 * both the CPU and the USB-controller which run concurrently. Great 59 * care must be taken. When the data-structures are linked into the 60 * USB controller's frame list, the USB-controller "owns" the 61 * td_status and qh_elink fields, which will not be written by the 62 * CPU. 63 * 64 */ 65 66 struct uhci_td { 67 /* 68 * Data used by the UHCI controller. 69 * volatile is used in order to mantain struct members ordering. 70 */ 71 volatile uint32_t td_next; 72 volatile uint32_t td_status; 73 #define UHCI_TD_GET_ACTLEN(s) (((s) + 1) & 0x3ff) 74 #define UHCI_TD_ZERO_ACTLEN(t) ((t) | 0x3ff) 75 #define UHCI_TD_BITSTUFF 0x00020000 76 #define UHCI_TD_CRCTO 0x00040000 77 #define UHCI_TD_NAK 0x00080000 78 #define UHCI_TD_BABBLE 0x00100000 79 #define UHCI_TD_DBUFFER 0x00200000 80 #define UHCI_TD_STALLED 0x00400000 81 #define UHCI_TD_ACTIVE 0x00800000 82 #define UHCI_TD_IOC 0x01000000 83 #define UHCI_TD_IOS 0x02000000 84 #define UHCI_TD_LS 0x04000000 85 #define UHCI_TD_GET_ERRCNT(s) (((s) >> 27) & 3) 86 #define UHCI_TD_SET_ERRCNT(n) ((n) << 27) 87 #define UHCI_TD_SPD 0x20000000 88 volatile uint32_t td_token; 89 #define UHCI_TD_PID 0x000000ff 90 #define UHCI_TD_PID_IN 0x00000069 91 #define UHCI_TD_PID_OUT 0x000000e1 92 #define UHCI_TD_PID_SETUP 0x0000002d 93 #define UHCI_TD_GET_PID(s) ((s) & 0xff) 94 #define UHCI_TD_SET_DEVADDR(a) ((a) << 8) 95 #define UHCI_TD_GET_DEVADDR(s) (((s) >> 8) & 0x7f) 96 #define UHCI_TD_SET_ENDPT(e) (((e) & 0xf) << 15) 97 #define UHCI_TD_GET_ENDPT(s) (((s) >> 15) & 0xf) 98 #define UHCI_TD_SET_DT(t) ((t) << 19) 99 #define UHCI_TD_GET_DT(s) (((s) >> 19) & 1) 100 #define UHCI_TD_SET_MAXLEN(l) (((l)-1) << 21) 101 #define UHCI_TD_GET_MAXLEN(s) ((((s) >> 21) + 1) & 0x7ff) 102 #define UHCI_TD_MAXLEN_MASK 0xffe00000 103 volatile uint32_t td_buffer; 104 /* 105 * Extra information needed: 106 */ 107 struct uhci_td *next; 108 struct uhci_td *prev; 109 struct uhci_td *obj_next; 110 struct usb_page_cache *page_cache; 111 struct usb_page_cache *fix_pc; 112 uint32_t td_self; 113 uint16_t len; 114 } __aligned(UHCI_TD_ALIGN); 115 116 typedef struct uhci_td uhci_td_t; 117 118 #define UHCI_TD_ERROR (UHCI_TD_BITSTUFF | UHCI_TD_CRCTO | \ 119 UHCI_TD_BABBLE | UHCI_TD_DBUFFER | UHCI_TD_STALLED) 120 121 #define UHCI_TD_SETUP(len, endp, dev) (UHCI_TD_SET_MAXLEN(len) | \ 122 UHCI_TD_SET_ENDPT(endp) | \ 123 UHCI_TD_SET_DEVADDR(dev) | \ 124 UHCI_TD_PID_SETUP) 125 126 #define UHCI_TD_OUT(len, endp, dev, dt) (UHCI_TD_SET_MAXLEN(len) | \ 127 UHCI_TD_SET_ENDPT(endp) | \ 128 UHCI_TD_SET_DEVADDR(dev) | \ 129 UHCI_TD_PID_OUT | UHCI_TD_SET_DT(dt)) 130 131 #define UHCI_TD_IN(len, endp, dev, dt) (UHCI_TD_SET_MAXLEN(len) | \ 132 UHCI_TD_SET_ENDPT(endp) | \ 133 UHCI_TD_SET_DEVADDR(dev) | \ 134 UHCI_TD_PID_IN | UHCI_TD_SET_DT(dt)) 135 136 struct uhci_qh { 137 /* 138 * Data used by the UHCI controller. 139 */ 140 volatile uint32_t qh_h_next; 141 volatile uint32_t qh_e_next; 142 /* 143 * Extra information needed: 144 */ 145 struct uhci_qh *h_next; 146 struct uhci_qh *h_prev; 147 struct uhci_qh *obj_next; 148 struct uhci_td *e_next; 149 struct usb_page_cache *page_cache; 150 uint32_t qh_self; 151 uint16_t intr_pos; 152 } __aligned(UHCI_QH_ALIGN); 153 154 typedef struct uhci_qh uhci_qh_t; 155 156 /* Maximum number of isochronous TD's and QH's interrupt */ 157 #define UHCI_VFRAMELIST_COUNT 128 158 #define UHCI_IFRAMELIST_COUNT (2 * UHCI_VFRAMELIST_COUNT) 159 160 #if (((UHCI_VFRAMELIST_COUNT & (UHCI_VFRAMELIST_COUNT-1)) != 0) || \ 161 (UHCI_VFRAMELIST_COUNT > UHCI_FRAMELIST_COUNT)) 162 #error "UHCI_VFRAMELIST_COUNT is not power of two" 163 #error "or UHCI_VFRAMELIST_COUNT > UHCI_FRAMELIST_COUNT" 164 #endif 165 166 #if (UHCI_VFRAMELIST_COUNT < USB_MAX_FS_ISOC_FRAMES_PER_XFER) 167 #error "maximum number of full-speed isochronous frames is higher than supported!" 168 #endif 169 170 struct uhci_config_desc { 171 struct usb_config_descriptor confd; 172 struct usb_interface_descriptor ifcd; 173 struct usb_endpoint_descriptor endpd; 174 } __packed; 175 176 union uhci_hub_desc { 177 struct usb_status stat; 178 struct usb_port_status ps; 179 uint8_t temp[128]; 180 }; 181 182 struct uhci_hw_softc { 183 struct usb_page_cache pframes_pc; 184 struct usb_page_cache isoc_start_pc[UHCI_VFRAMELIST_COUNT]; 185 struct usb_page_cache intr_start_pc[UHCI_IFRAMELIST_COUNT]; 186 struct usb_page_cache ls_ctl_start_pc; 187 struct usb_page_cache fs_ctl_start_pc; 188 struct usb_page_cache bulk_start_pc; 189 struct usb_page_cache last_qh_pc; 190 struct usb_page_cache last_td_pc; 191 192 struct usb_page pframes_pg; 193 struct usb_page isoc_start_pg[UHCI_VFRAMELIST_COUNT]; 194 struct usb_page intr_start_pg[UHCI_IFRAMELIST_COUNT]; 195 struct usb_page ls_ctl_start_pg; 196 struct usb_page fs_ctl_start_pg; 197 struct usb_page bulk_start_pg; 198 struct usb_page last_qh_pg; 199 struct usb_page last_td_pg; 200 }; 201 202 typedef struct uhci_softc { 203 struct uhci_hw_softc sc_hw; 204 struct usb_bus sc_bus; /* base device */ 205 union uhci_hub_desc sc_hub_desc; 206 struct usb_callout sc_root_intr; 207 208 struct usb_device *sc_devices[UHCI_MAX_DEVICES]; 209 /* pointer to last TD for isochronous */ 210 struct uhci_td *sc_isoc_p_last[UHCI_VFRAMELIST_COUNT]; 211 /* pointer to last QH for interrupt */ 212 struct uhci_qh *sc_intr_p_last[UHCI_IFRAMELIST_COUNT]; 213 /* pointer to last QH for low speed control */ 214 struct uhci_qh *sc_ls_ctl_p_last; 215 /* pointer to last QH for full speed control */ 216 struct uhci_qh *sc_fs_ctl_p_last; 217 /* pointer to last QH for bulk */ 218 struct uhci_qh *sc_bulk_p_last; 219 struct uhci_qh *sc_reclaim_qh_p; 220 struct uhci_qh *sc_last_qh_p; 221 struct uhci_td *sc_last_td_p; 222 struct resource *sc_io_res; 223 struct resource *sc_irq_res; 224 void *sc_intr_hdl; 225 device_t sc_dev; 226 bus_size_t sc_io_size; 227 bus_space_tag_t sc_io_tag; 228 bus_space_handle_t sc_io_hdl; 229 230 uint32_t sc_loops; /* number of QHs that wants looping */ 231 232 uint16_t sc_intr_stat[UHCI_IFRAMELIST_COUNT]; 233 234 uint8_t sc_addr; /* device address */ 235 uint8_t sc_conf; /* device configuration */ 236 uint8_t sc_didinit; /* uchi_init() called */ 237 uint8_t sc_isreset; /* bits set if a root hub is reset */ 238 uint8_t sc_isresumed; /* bits set if a port was resumed */ 239 uint8_t sc_hub_idata[1]; 240 241 char sc_vendor[16]; /* vendor string for root hub */ 242 } uhci_softc_t; 243 244 usb_bus_mem_cb_t uhci_iterate_hw_softc; 245 246 usb_error_t uhci_init(uhci_softc_t *sc); 247 void uhci_reset(uhci_softc_t *sc); 248 void uhci_interrupt(uhci_softc_t *sc); 249 250 #endif /* _UHCI_H_ */ 251