1# $FreeBSD: src/sys/conf/options,v 1.191.2.53 2003/06/04 17:56:58 sam Exp $ 2# 3# On the handling of kernel options 4# 5# All kernel options should be listed in LINT, with suitable 6# descriptions. Negative options (options that make some code not 7# compile) should be commented out; LINT should compile as much code 8# as possible. Try to structure option-using code so that a single 9# option only switch code on, or only switch code off, to make it 10# possible to have a full compile-test. If necessary, you can include 11# "opt_lint.h" and check for COMPILING_LINT to get maximum code 12# coverage. 13# 14# All new options shall also be listed in either "conf/options" or 15# "platform/<platform>/conf/options". Options that affect a single 16# source-file <xxx>.[c|s] should be directed into "opt_<xxx>.h", while 17# options that affect multiple files should either go in 18# "opt_global.h" if this is a kernel-wide option (used just about 19# everywhere), or in "opt_<option-name-in-lower-case>.h" if it affect 20# only some files. Note that the effect of listing only an option 21# without a header-file-name in conf/options (and cousins) is that the 22# last convention is followed. 23# 24# This handling scheme is not yet fully implemented. 25# 26# 27# Format of this file: 28# Option name filename 29# 30# If filename is missing, the default is 31# opt_<name-of-option-in-lower-case>.h 32 33# Adaptec Array Controller driver options 34AAC_DEBUG opt_aac.h 35 36# Adaptec aic7xxx SCSI controller options 37AHC_ALLOW_MEMIO opt_aic7xxx.h # Allow PCI devices to use memory 38 # mapped I/O 39 40AHC_TMODE_ENABLE opt_aic7xxx.h # Bitmap of units to enable 41 # targetmode operations. 42 43AHC_DUMP_EEPROM opt_aic7xxx.h # Dump the contents of our 44 # configuration prom. 45 46AHC_DEBUG opt_aic7xxx.h # Compile in Aic7xxx Debugging code. 47 48AHC_DEBUG_OPTS opt_aic7xxx.h # Aic7xxx driver debugging options. 49 # See sys/dev/aic7xxx/aic7xxx.h 50 51AHC_REG_PRETTY_PRINT opt_aic7xxx.h # Print register bitfields in debug 52 # output. Adds ~15k to driver. 53 54# Adaptec aic79xx SCSI controller options 55AHD_DEBUG opt_aic79xx.h # Compile in Aic79xx Debugging code. 56 57AHD_DEBUG_OPTS opt_aic79xx.h # Aic79xx driver debugging options. 58 # See sys/dev/aic7xxx/aic79xx.h 59 60AHD_TMODE_ENABLE opt_aic79xx.h # Bitmap of units to enable 61 # targetmode operations. 62 63AHD_REG_PRETTY_PRINT opt_aic79xx.h # Print register bitfields in debug 64 # output. Adds ~15k to driver. 65 66ADW_ALLOW_MEMIO opt_adw.h # Allow PCI devices to use memory 67 # mapped I/O 68AMR_DEBUG opt_amr.h 69TWA_DEBUG opt_twa.h 70 71#options for ACPI support 72ACPI_DEBUG opt_acpi.h 73ACPI_NO_SEMAPHORES opt_acpi.h 74ACPI_ENABLE_PCI opt_acpi.h 75 76# Miscellaneous options. 77COMPAT_43 opt_compat.h 78COMPILING_LINT opt_lint.h 79DDB 80DDB_TRACE 81DDB_UNATTENDED opt_ddb.h 82GDB_REMOTE_CHAT opt_ddb.h 83KTRACE 84LIBICONV 85MD_NSECT opt_md.h 86MD_ROOT opt_md.h 87MD_ROOT_SIZE opt_md.h 88MFI_DEBUG opt_mfi.h 89NSWAPDEV opt_swap.h 90NSWBUF_MIN opt_swap.h 91PPS_SYNC opt_ntp.h 92QUOTA 93SUIDDIR opt_suiddir.h 94SYSVMSG opt_sysvipc.h 95SYSVSEM opt_sysvipc.h 96SYSVSHM opt_sysvipc.h 97SHMMIN opt_sysvipc.h 98SHMMNI opt_sysvipc.h 99SHMSEG opt_sysvipc.h 100SEMMAP opt_sysvipc.h 101SEMMNI opt_sysvipc.h 102SEMMNS opt_sysvipc.h 103SEMMNU opt_sysvipc.h 104SEMMSL opt_sysvipc.h 105SEMOPM opt_sysvipc.h 106SEMUME opt_sysvipc.h 107MSGMNB opt_sysvipc.h 108MSGMNI opt_sysvipc.h 109MSGSEG opt_sysvipc.h 110MSGSSZ opt_sysvipc.h 111MSGTQL opt_sysvipc.h 112UCONSOLE 113ICMP_BANDLIM 114SHOW_BUSYBUFS 115DIRECTIO opt_directio.h 116 117# POSIX kernel options 118P1003_1B opt_posix.h 119_KPOSIX_PRIORITY_SCHEDULING opt_posix.h 120_KPOSIX_VERSION opt_posix.h 121 122# Do we want the config file compiled into the kernel? 123INCLUDE_CONFIG_FILE opt_config.h 124 125# Options for static file systems. These should only be used at config 126# time, since the corresponding lkms cannot work if there are any static 127# dependencies. Unusability is enforced by hiding the defines for the 128# options in a never-included header. 129EXT2FS opt_dontuse.h 130FDESC opt_dontuse.h 131HAMMER opt_dontuse.h 132HPFS opt_dontuse.h 133MFS opt_dontuse.h 134MSDOSFS opt_dontuse.h 135NTFS opt_dontuse.h 136NULLFS opt_dontuse.h 137NWFS opt_dontuse.h 138PORTAL opt_dontuse.h 139PROCFS opt_dontuse.h 140PUFFS opt_dontuse.h 141SMBFS opt_dontuse.h 142TMPFS opt_dontuse.h 143UDF opt_dontuse.h 144 145# These static filesystems has one slightly bogus static dependency in 146# sys/platform/.../i386/autoconf.c. If any of these filesystems are 147# statically compiled into the kernel, code for mounting them as root 148# filesystems will be enabled - but look below. Boot-code is purposely 149# unavailable for the LKM-based versions. 150CD9660 151FFS 152NFS 153 154# filesystems and libiconv bridge 155CD9660_ICONV opt_dontuse.h 156MSDOSFS_ICONV opt_dontuse.h 157NTFS_ICONV opt_dontuse.h 158 159# SMB/CIFS requester 160NETSMB opt_netsmb.h 161NETSMBCRYPTO opt_netsmb.h 162 163# If you are following the conditions in the copyright, 164# you can enable soft-updates which will speed up a lot of things 165# and make the system safer from crashes at the same time. 166# otherwise a STUB module will be compiled in. 167SOFTUPDATES opt_ffs.h 168 169# Enable fast hash lookups for large directories on UFS-based filesystems. 170UFS_DIRHASH opt_ufs.h 171 172# The above static dependencies are planned removed, with a 173# <filesystem>_ROOT option to control if it usable as root. This list 174# allows these options to be present in config files already (though 175# they won't make any difference yet). 176FFS_ROOT opt_ffs.h 177NFS_ROOT opt_nfsroot.h 178 179# The union static file system has bogus static dependencies, so it isn't 180# hidden yet. 181UNION 182 183# Options used only in subr_param.c. 184HZ opt_param.h 185MAXFILES opt_param.h 186NBUF opt_param.h 187NMBCLUSTERS opt_param.h 188NMBUFS opt_param.h 189VM_BCACHE_SIZE_MAX opt_param.h 190VM_SWZONE_SIZE_MAX opt_param.h 191MAXUSERS 192DFLDSIZ opt_param.h 193MAXDSIZ opt_param.h 194MAXSSIZ opt_param.h 195 196# Generic SCSI options. 197CAM_MAX_HIGHPOWER opt_cam.h 198CAMDEBUG opt_cam.h 199CAM_DEBUG_DELAY opt_cam.h 200CAM_DEBUG_BUS opt_cam.h 201CAM_DEBUG_TARGET opt_cam.h 202CAM_DEBUG_LUN opt_cam.h 203CAM_DEBUG_FLAGS opt_cam.h 204SCSI_DELAY opt_scsi.h 205SCSI_NO_SENSE_STRINGS opt_scsi.h 206SCSI_NO_OP_STRINGS opt_scsi.h 207 208# iSCSI options 209ISCSI_INITIATOR_DEBUG opt_iscsi_initiator.h 210 211# Options used only in cam/scsi/scsi_cd.c 212CHANGER_MIN_BUSY_SECONDS opt_cd.h 213CHANGER_MAX_BUSY_SECONDS opt_cd.h 214 215# Options used only in cam/scsi/scsi_sa.c. 216SA_IO_TIMEOUT opt_sa.h 217SA_SPACE_TIMEOUT opt_sa.h 218SA_REWIND_TIMEOUT opt_sa.h 219SA_ERASE_TIMEOUT opt_sa.h 220SA_1FM_AT_EOD opt_sa.h 221 222# Options used only in cam/scsi/scsi_pt.c 223SCSI_PT_DEFAULT_TIMEOUT opt_pt.h 224 225# Options used only in cam/scsi/scsi_ses.c 226SES_ENABLE_PASSTHROUGH opt_ses.h 227 228# Options used in dev/sym/ (Symbios SCSI driver). 229SYM_SETUP_LP_PROBE_MAP opt_sym.h #-Low Priority Probe Map (bits) 230 # Allows the ncr to take precedence 231 # 1 (1<<0) -> 810a, 860 232 # 2 (1<<1) -> 825a, 875, 885, 895 233 # 4 (1<<2) -> 895a, 896, 1510d 234SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885 235 # disabled:0 (default), enabled:1 236SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking 237 # disabled:0, enabled:1 (default) 238SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported 239 # default:8, range:[1..64] 240 241# Options used only in pci/ncr.c 242SCSI_NCR_DEBUG opt_ncr.h 243SCSI_NCR_MAX_SYNC opt_ncr.h 244SCSI_NCR_MAX_WIDE opt_ncr.h 245SCSI_NCR_MYADDR opt_ncr.h 246 247# Options used only in pci/isp_pci.c 248ISP_TARGET_MODE opt_isp.h 249 250# Options used in the 'nata' ATA/ATAPI driver 251ATA_STATIC_ID opt_ata.h 252 253# Net stuff. 254# altq stuff 255ALTQ opt_global.h 256ALTQ_CBQ opt_altq.h 257ALTQ_RED opt_altq.h 258ALTQ_RIO opt_altq.h 259ALTQ_HFSC opt_altq.h 260ALTQ_PRIQ opt_altq.h 261ALTQ_FAIRQ opt_altq.h 262ALTQ_NOPCC opt_altq.h 263ALTQ_DEBUG opt_altq.h 264 265ACCEPT_FILTER_DATA 266ACCEPT_FILTER_HTTP 267BOOTP opt_bootp.h 268BOOTP_COMPAT opt_bootp.h 269BOOTP_NFSROOT opt_bootp.h 270BOOTP_NFSV3 opt_bootp.h 271BOOTP_WIRED_TO opt_bootp.h 272CARP opt_carp.h 273ETHER_II opt_ef.h 274ETHER_8023 opt_ef.h 275ETHER_8022 opt_ef.h 276ETHER_SNAP opt_ef.h 277MROUTING opt_mrouting.h 278PIM opt_mrouting.h 279INET opt_inet.h 280INET6 opt_inet6.h 281IPSEC opt_ipsec.h 282IPSEC_ESP opt_ipsec.h 283IPSEC_DEBUG opt_ipsec.h 284IPSEC_FILTERGIF opt_ipsec.h 285FAST_IPSEC opt_ipsec.h 286IPDIVERT 287DUMMYNET opt_ipdn.h 288DUMMYNET_DEBUG opt_ipdn.h 289IPFIREWALL opt_ipfw.h 290IPFIREWALL_DEBUG opt_ipfw.h 291IPFIREWALL_VERBOSE opt_ipfw.h 292IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h 293IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h 294IPV6FIREWALL opt_ip6fw.h 295IPV6FIREWALL_VERBOSE opt_ip6fw.h 296IPV6FIREWALL_VERBOSE_LIMIT opt_ip6fw.h 297IPV6FIREWALL_DEFAULT_TO_ACCEPT opt_ip6fw.h 298IPSTEALTH 299IPX opt_ipx.h 300IPXIP opt_ipx.h 301IPTUNNEL opt_ipx.h 302LIBMCHAIN 303MPLS opt_mpls.h 304NCP opt_ncp.h 305PPP_BSDCOMP opt_ppp.h 306PPP_DEFLATE opt_ppp.h 307PPP_FILTER opt_ppp.h 308SLIP_IFF_OPTS opt_slip.h 309TCPDEBUG 310TCP_SIGNATURE opt_inet.h 311TCP_DROP_SYNFIN opt_tcp_input.h 312 313XBONEHACK 314MBUF_STRESS_TEST opt_mbuf_stress_test.h 315 316# (New netgraph, port still in progress) 317# 318# Netgraph(4). Use option NETGRAPH7 to enable the base netgraph code. 319# Each netgraph node type can be either be compiled into the kernel 320# or loaded dynamically. To get the former, include the corresponding 321# option below. Each type has its own man page, e.g. ng_async(4). 322NETGRAPH7 323NETGRAPH7_DEBUG opt_netgraph.h 324NETGRAPH7_ASYNC opt_netgraph.h 325NETGRAPH7_ATMLLC opt_netgraph.h 326NETGRAPH7_ATM_ATMPIF opt_netgraph.h 327NETGRAPH7_BLUETOOTH opt_netgraph.h 328NETGRAPH7_BLUETOOTH_BT3C opt_netgraph.h 329NETGRAPH7_BLUETOOTH_H4 opt_netgraph.h 330NETGRAPH7_BLUETOOTH_HCI opt_netgraph.h 331NETGRAPH7_BLUETOOTH_L2CAP opt_netgraph.h 332NETGRAPH7_BLUETOOTH_SOCKET opt_netgraph.h 333NETGRAPH7_BLUETOOTH_UBT opt_netgraph.h 334NETGRAPH7_BLUETOOTH_UBTBCMFW opt_netgraph.h 335NETGRAPH7_BPF opt_netgraph.h 336NETGRAPH7_BRIDGE opt_netgraph.h 337NETGRAPH7_CAR opt_netgraph.h 338NETGRAPH7_CISCO opt_netgraph.h 339NETGRAPH7_DEFLATE opt_netgraph.h 340NETGRAPH7_DEVICE opt_netgraph.h 341NETGRAPH7_ECHO opt_netgraph.h 342NETGRAPH7_EIFACE opt_netgraph.h 343NETGRAPH7_ETF opt_netgraph.h 344NETGRAPH7_ETHER opt_netgraph.h 345NETGRAPH7_FEC opt_netgraph.h 346NETGRAPH7_FRAME_RELAY opt_netgraph.h 347NETGRAPH7_GIF opt_netgraph.h 348NETGRAPH7_GIF_DEMUX opt_netgraph.h 349NETGRAPH7_HOLE opt_netgraph.h 350NETGRAPH7_HUB opt_netgraph.h 351NETGRAPH7_IFACE opt_netgraph.h 352NETGRAPH7_IP_INPUT opt_netgraph.h 353NETGRAPH7_IPFW opt_netgraph.h 354NETGRAPH7_KSOCKET opt_netgraph.h 355NETGRAPH7_L2TP opt_netgraph.h 356NETGRAPH7_LMI opt_netgraph.h 357# MPPC compression requires proprietary files (not included) 358NETGRAPH7_MPPC_COMPRESSION opt_netgraph.h 359NETGRAPH7_MPPC_ENCRYPTION opt_netgraph.h 360NETGRAPH7_NAT opt_netgraph.h 361NETGRAPH7_NETFLOW opt_netgraph.h 362NETGRAPH7_ONE2MANY opt_netgraph.h 363NETGRAPH7_PPP opt_netgraph.h 364NETGRAPH7_PPPOE opt_netgraph.h 365NETGRAPH7_PPTPGRE opt_netgraph.h 366NETGRAPH7_PRED1 opt_netgraph.h 367NETGRAPH7_RFC1490 opt_netgraph.h 368NETGRAPH7_SOCKET opt_netgraph.h 369NETGRAPH7_SPLIT opt_netgraph.h 370NETGRAPH7_SPPP opt_netgraph.h 371NETGRAPH7_TAG opt_netgraph.h 372NETGRAPH7_TCPMSS opt_netgraph.h 373NETGRAPH7_TEE opt_netgraph.h 374NETGRAPH7_TTY opt_netgraph.h 375NETGRAPH7_UI opt_netgraph.h 376NETGRAPH7_VJC opt_netgraph.h 377 378# NgATM options 379NGATM7_ATM opt_netgraph.h 380NGATM7_ATMBASE opt_netgraph.h 381NGATM7_SSCOP opt_netgraph.h 382NGATM7_SSCFU opt_netgraph.h 383NGATM7_UNI opt_netgraph.h 384NGATM7_CCATM opt_netgraph.h 385 386# Netgraph(4). Use option NETGRAPH to enable the base netgraph code. 387# Each netgraph node type can be either be compiled into the kernel 388# or loaded dynamically. To get the former, include the corresponding 389# option below. Each type has its own man page, e.g. ng_async(8). 390NETGRAPH 391NETGRAPH_ASYNC opt_netgraph.h 392NETGRAPH_BPF opt_netgraph.h 393NETGRAPH_BRIDGE opt_netgraph.h 394NETGRAPH_CISCO opt_netgraph.h 395NETGRAPH_ECHO opt_netgraph.h 396NETGRAPH_EIFACE opt_netgraph.h 397NETGRAPH_ETHER opt_netgraph.h 398NETGRAPH_FEC opt_netgraph.h 399NETGRAPH_FRAME_RELAY opt_netgraph.h 400NETGRAPH_HOLE opt_netgraph.h 401NETGRAPH_IFACE opt_netgraph.h 402NETGRAPH_KSOCKET opt_netgraph.h 403NETGRAPH_LMI opt_netgraph.h 404NETGRAPH_L2TP opt_netgraph.h 405# MPPC compression requires proprietary files (not included) 406NETGRAPH_MPPC_COMPRESSION opt_netgraph.h 407NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h 408NETGRAPH_ONE2MANY opt_netgraph.h 409NETGRAPH_PPP opt_netgraph.h 410NETGRAPH_PPPOE opt_netgraph.h 411NETGRAPH_PPTPGRE opt_netgraph.h 412NETGRAPH_RFC1490 opt_netgraph.h 413NETGRAPH_SOCKET opt_netgraph.h 414NETGRAPH_TEE opt_netgraph.h 415NETGRAPH_TTY opt_netgraph.h 416NETGRAPH_UI opt_netgraph.h 417NETGRAPH_VJC opt_netgraph.h 418 419# AGP options 420AGP_DEBUG opt_agp.h 421 422# DRM options 423DRM_DEBUG opt_drm.h 424DRM_LINUX opt_drm.h 425 426# ATM (HARP version) 427ATM_CORE opt_atm.h 428ATM_IP opt_atm.h 429ATM_SIGPVC opt_atm.h 430ATM_SPANS opt_atm.h 431ATM_UNI opt_atm.h 432 433# XXX Conflict: # of devices vs network protocol (Native ATM). 434# This makes "atm.h" unusable. 435NATM opt_natm.h 436 437# DPT driver debug flags 438DPT_MEASURE_PERFORMANCE opt_dpt.h 439DPT_HANDLE_TIMEOUTS opt_dpt.h 440DPT_TIMEOUT_FACTOR opt_dpt.h 441DPT_LOST_IRQ opt_dpt.h 442DPT_RESET_HBA opt_dpt.h 443 444# Misc debug flags. Most of these should probably be replaced with 445# 'DEBUG', and then let people recompile just the interesting modules 446# with 'make CC="cc -DDEBUG"'. 447CLUSTERDEBUG opt_debug_cluster.h 448DEBUG_1284 opt_ppb_1284.h 449VP0_DEBUG opt_vpo.h 450LPT_DEBUG opt_lpt.h 451PLIP_DEBUG opt_plip.h 452LOCKF_DEBUG opt_debug_lockf.h 453SI_DEBUG opt_debug_si.h 454 455# Fb options 456FB_DEBUG opt_fb.h 457FB_INSTALL_CDEV opt_fb.h 458 459# ppbus related options 460PERIPH_1284 opt_ppb_1284.h 461DONTPROBE_1284 opt_ppb_1284.h 462 463# smbus related options 464ENABLE_ALART opt_intpm.h 465 466# These cause changes all over the kernel 467NO_LWKT_SPLIT_USERPRI opt_global.h 468BLKDEV_IOSIZE opt_global.h 469DEBUG opt_global.h 470DEBUG_LOCKS opt_global.h 471DEBUG_LOCKS_LATENCY opt_global.h 472DEBUG_CRIT_SECTIONS opt_global.h 473DIAGNOSTIC opt_global.h 474INVARIANTS opt_global.h 475VFS_BIO_DEBUG opt_global.h 476DEBUG_INTERRUPTS opt_global.h 477SOCKBUF_DEBUG opt_global.h 478PANIC_DEBUG opt_global.h 479MBUF_DEBUG opt_global.h 480PMAP_DEBUG opt_global.h 481VM_PAGE_DEBUG opt_global.h 482SLAB_DEBUG opt_global.h 483 484# Sample system/interrupt PC 485DEBUG_PCTRACK opt_pctrack.h 486 487# These are VM related options 488NO_SWAPPING opt_vm.h 489 490# sys/netkey 491KEY 492 493# Size of the kernel message buffer 494MSGBUF_SIZE opt_msgbuf.h 495 496# PCI related options 497COMPAT_OLDPCI 498 499# NFS options 500NFS_MINATTRTIMO opt_nfs.h 501NFS_MAXATTRTIMO opt_nfs.h 502NFS_MINDIRATTRTIMO opt_nfs.h 503NFS_MAXDIRATTRTIMO opt_nfs.h 504NFS_GATHERDELAY opt_nfs.h 505NFS_UIDHASHSIZ opt_nfs.h 506NFS_WDELAYHASHSIZ opt_nfs.h 507NFS_MUIDHASHSIZ opt_nfs.h 508NFS_NOSERVER opt_nfs.h 509NFS_DEBUG opt_nfs.h 510 511# MSDOSFS options 512MSDOSFS_DEBUG opt_msdosfs.h 513 514# For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver 515BROOKTREE_SYSTEM_DEFAULT opt_bktr.h 516BROOKTREE_ALLOC_PAGES opt_bktr.h 517BKTR_OVERRIDE_CARD opt_bktr.h 518BKTR_OVERRIDE_TUNER opt_bktr.h 519BKTR_OVERRIDE_DBX opt_bktr.h 520BKTR_OVERRIDE_MSP opt_bktr.h 521BKTR_SYSTEM_DEFAULT opt_bktr.h 522BKTR_ALLOC_PAGES opt_bktr.h 523BKTR_USE_PLL opt_bktr.h 524BKTR_GPIO_ACCESS opt_bktr.h 525BKTR_NO_MSP_RESET opt_bktr.h 526BKTR_430_FX_MODE opt_bktr.h 527BKTR_SIS_VIA_MODE opt_bktr.h 528BKTR_NEW_MSP34XX_DRIVER opt_bktr.h 529 530# Various mi ISA bus flags 531COM_ESP opt_sio.h 532COM_MULTIPORT opt_sio.h 533BREAK_TO_DEBUGGER opt_comconsole.h 534ALT_BREAK_TO_DEBUGGER opt_comconsole.h 535 536# options for bus/device framework 537BUS_DEBUG opt_bus.h 538 539# options for USB support 540OHCI_DEBUG opt_usb.h 541USB_DEBUG opt_usb.h 542 543# Vinum options 544VINUMDEBUG opt_vinum.h 545 546# Embedded system options 547UKBD_DFLT_KEYMAP opt_ukbd.h 548INIT_PATH opt_init_path.h 549 550ROOTDEVNAME opt_rootdevname.h 551 552FDC_DEBUG opt_fdc.h 553PCFCLOCK_VERBOSE opt_pcfclock.h 554PCFCLOCK_MAX_RETRIES opt_pcfclock.h 555 556# Network device queue based polling 557IFPOLL_ENABLE opt_ifpoll.h 558 559# options for ubsec driver 560UBSEC_DEBUG opt_ubsec.h 561UBSEC_RNDTEST opt_ubsec.h 562UBSEC_NO_RNG opt_ubsec.h 563 564# options for hifn driver 565HIFN_DEBUG opt_hifn.h 566HIFN_RNDTEST opt_hifn.h 567HIFN_NO_RNG opt_hifn.h 568 569# options for safenet driver 570SAFE_DEBUG opt_safe.h 571SAFE_NO_RNG opt_safe.h 572SAFE_RNDTEST opt_safe.h 573 574# KTR options 575KTR opt_global.h 576KTR_ENTRIES opt_global.h 577KTR_ALL opt_ktr.h 578KTR_CTXSW opt_ktr.h 579KTR_DMCRYPT opt_ktr.h 580KTR_DSCHED_BFQ opt_ktr.h 581KTR_ETHERNET opt_ktr.h 582KTR_HAMMER opt_ktr.h 583KTR_IFQ opt_ktr.h 584KTR_IF_BGE opt_ktr.h 585KTR_IF_EM opt_ktr.h 586KTR_IF_EMX opt_ktr.h 587KTR_IF_START opt_ktr.h 588KTR_IPIQ opt_ktr.h 589KTR_KERNENTRY opt_ktr.h 590KTR_MEMORY opt_ktr.h 591KTR_SERIALIZER opt_ktr.h 592KTR_SPIN_CONTENTION opt_ktr.h 593KTR_TESTLOG opt_ktr.h 594KTR_TOKENS opt_ktr.h 595KTR_TSLEEP opt_ktr.h 596KTR_USB_MEMORY opt_ktr.h 597KTR_USCHED_BSD4 opt_ktr.h 598KTR_USCHED_DFLY opt_ktr.h 599KTR_VERBOSE opt_ktr.h 600 601# NTFS options 602NTFS_DEBUG opt_ntfs.h 603 604# options for the Atheros driver 605ATH_DEBUG opt_ath.h 606ATH_DIAGAPI opt_ath.h 607ATH_RXBUF opt_ath.h 608ATH_TXBUF opt_ath.h 609 610# ...and its HAL 611AH_SUPPORT_AR5416 opt_ah.h 612 613# bce driver 614BCE_RSS_DEBUG opt_bce.h 615BCE_TSS_DEBUG opt_bce.h 616 617# bnx driver 618BNX_RSS_DEBUG opt_bnx.h 619BNX_TSO_DEBUG opt_bnx.h 620BNX_TSS_DEBUG opt_bnx.h 621 622# ed driver 623ED_NO_MIIBUS opt_ed.h 624 625# emx driver 626EMX_RSS_DEBUG opt_emx.h 627EMX_TSO_DEBUG opt_emx.h 628EMX_TSS_DEBUG opt_emx.h 629 630# jme driver 631JME_RSS_DEBUG opt_jme.h 632 633# igb driver 634IGB_RSS_DEBUG opt_igb.h 635IGB_TSS_DEBUG opt_igb.h 636IGB_MSIX_DEBUG opt_igb.h 637 638# dcons options 639DCONS_BUF_SIZE opt_dcons.h 640DCONS_POLL_HZ opt_dcons.h 641DCONS_FORCE_CONSOLE opt_dcons.h 642DCONS_FORCE_GDB opt_dcons.h 643 644# deprecated drivers and options 645I_WANT_DEPRECATED_STUFF opt_deprecated.h 646 647# SCTP 648SCTP opt_sctp.h 649SCTP_DEBUG opt_sctp.h 650SCTP_USE_ADLER32 opt_sctp.h 651SCTP_HIGH_SPEED opt_sctp.h 652SCTP_STAT_LOGGING opt_sctp.h 653SCTP_CWND_LOGGING opt_sctp.h 654SCTP_BLK_LOGGING opt_sctp.h 655SCTP_STR_LOGGING opt_sctp.h 656SCTP_FR_LOGGING opt_sctp.h 657SCTP_MAP_LOGGING opt_sctp.h 658 659# syslink kernel support 660# 661SYSLINK opt_syslink.h 662 663# DSCHED stuff 664DSCHED_AS opt_dsched.h 665DSCHED_BFQ opt_dsched.h 666DSCHED_FQ opt_dsched.h 667 668# Receive Side Scaling (now basecode) 669RSS_DEBUG opt_rss.h 670 671# Panic settings 672WDOG_DISABLE_ON_PANIC opt_panic.h 673ERROR_LED_ON_PANIC opt_panic.h 674 675# 802.11 support layer 676IEEE80211_DEBUG opt_wlan.h 677IEEE80211_DEBUG_REFCNT opt_wlan.h 678IEEE80211_AMPDU_AGE opt_wlan.h 679IEEE80211_SUPPORT_MESH opt_wlan.h 680IEEE80211_SUPPORT_SUPERG opt_wlan.h 681IEEE80211_SUPPORT_TDMA opt_wlan.h 682 683# 802.11 TDMA support 684TDMA_SLOTLEN_DEFAULT opt_tdma.h 685TDMA_SLOTCNT_DEFAULT opt_tdma.h 686TDMA_BINTVAL_DEFAULT opt_tdma.h 687TDMA_TXRATE_11B_DEFAULT opt_tdma.h 688TDMA_TXRATE_11G_DEFAULT opt_tdma.h 689TDMA_TXRATE_11A_DEFAULT opt_tdma.h 690TDMA_TXRATE_TURBO_DEFAULT opt_tdma.h 691TDMA_TXRATE_HALF_DEFAULT opt_tdma.h 692TDMA_TXRATE_QUARTER_DEFAULT opt_tdma.h 693TDMA_TXRATE_11NA_DEFAULT opt_tdma.h 694TDMA_TXRATE_11NG_DEFAULT opt_tdma.h 695 696PANIC_REBOOT_WAIT_TIME opt_panic.h 697 698# Obsolete options (will be removed in the future) 699# 700DEVICE_POLLING opt_dontuse.h 701SMP opt_dontuse.h 702