1# $FreeBSD: src/sys/conf/options,v 1.191.2.53 2003/06/04 17:56:58 sam Exp $ 2# 3# On the handling of kernel options 4# 5# All kernel options should be listed in LINT, with suitable 6# descriptions. Negative options (options that make some code not 7# compile) should be commented out; LINT should compile as much code 8# as possible. Try to structure option-using code so that a single 9# option only switch code on, or only switch code off, to make it 10# possible to have a full compile-test. If necessary, you can include 11# "opt_lint.h" and check for COMPILING_LINT to get maximum code 12# coverage. 13# 14# All new options shall also be listed in either "conf/options" or 15# "platform/<platform>/conf/options". Options that affect a single 16# source-file <xxx>.[c|s] should be directed into "opt_<xxx>.h", while 17# options that affect multiple files should either go in 18# "opt_global.h" if this is a kernel-wide option (used just about 19# everywhere), or in "opt_<option-name-in-lower-case>.h" if it affect 20# only some files. Note that the effect of listing only an option 21# without a header-file-name in conf/options (and cousins) is that the 22# last convention is followed. 23# 24# This handling scheme is not yet fully implemented. 25# 26# 27# Format of this file: 28# Option name filename 29# 30# If filename is missing, the default is 31# opt_<name-of-option-in-lower-case>.h 32 33# Adaptec Array Controller driver options 34AAC_DEBUG opt_aac.h 35 36# Adaptec aic7xxx SCSI controller options 37AHC_ALLOW_MEMIO opt_aic7xxx.h # Allow PCI devices to use memory 38 # mapped I/O 39 40AHC_TMODE_ENABLE opt_aic7xxx.h # Bitmap of units to enable 41 # targetmode operations. 42 43AHC_DUMP_EEPROM opt_aic7xxx.h # Dump the contents of our 44 # configuration prom. 45 46AHC_DEBUG opt_aic7xxx.h # Compile in Aic7xxx Debugging code. 47 48AHC_DEBUG_OPTS opt_aic7xxx.h # Aic7xxx driver debugging options. 49 # See sys/dev/aic7xxx/aic7xxx.h 50 51AHC_REG_PRETTY_PRINT opt_aic7xxx.h # Print register bitfields in debug 52 # output. Adds ~15k to driver. 53 54# Adaptec aic79xx SCSI controller options 55AHD_DEBUG opt_aic79xx.h # Compile in Aic79xx Debugging code. 56 57AHD_DEBUG_OPTS opt_aic79xx.h # Aic79xx driver debugging options. 58 # See sys/dev/aic7xxx/aic79xx.h 59 60AHD_TMODE_ENABLE opt_aic79xx.h # Bitmap of units to enable 61 # targetmode operations. 62 63AHD_REG_PRETTY_PRINT opt_aic79xx.h # Print register bitfields in debug 64 # output. Adds ~15k to driver. 65 66ADW_ALLOW_MEMIO opt_adw.h # Allow PCI devices to use memory 67 # mapped I/O 68AMR_DEBUG opt_amr.h 69TWA_DEBUG opt_twa.h 70 71#options for ACPI support 72ACPI_DEBUG opt_acpi.h 73ACPI_NO_SEMAPHORES opt_acpi.h 74ACPI_ENABLE_PCI opt_acpi.h 75 76# Miscellaneous options. 77COMPAT_43 opt_compat.h 78COMPILING_LINT opt_lint.h 79DDB 80DDB_TRACE 81DDB_UNATTENDED opt_ddb.h 82GDB_REMOTE_CHAT opt_ddb.h 83KTRACE 84LIBICONV 85MD_NSECT opt_md.h 86MD_ROOT opt_md.h 87MD_ROOT_SIZE opt_md.h 88MFI_DEBUG opt_mfi.h 89NSWAPDEV opt_swap.h 90NSWBUF_MIN opt_swap.h 91PPS_SYNC opt_ntp.h 92QUOTA 93SUIDDIR opt_suiddir.h 94SHMMIN opt_sysvipc.h 95SHMMNI opt_sysvipc.h 96SHMSEG opt_sysvipc.h 97SEMMAP opt_sysvipc.h 98SEMMNI opt_sysvipc.h 99SEMMNS opt_sysvipc.h 100SEMMNU opt_sysvipc.h 101SEMMSL opt_sysvipc.h 102SEMOPM opt_sysvipc.h 103SEMUME opt_sysvipc.h 104MSGMNB opt_sysvipc.h 105MSGMNI opt_sysvipc.h 106MSGSEG opt_sysvipc.h 107MSGSSZ opt_sysvipc.h 108MSGTQL opt_sysvipc.h 109UCONSOLE 110ICMP_BANDLIM 111SHOW_BUSYBUFS 112DIRECTIO opt_directio.h 113 114# POSIX kernel options 115P1003_1B opt_posix.h 116_KPOSIX_PRIORITY_SCHEDULING opt_posix.h 117_KPOSIX_VERSION opt_posix.h 118 119# Do we want the config file compiled into the kernel? 120INCLUDE_CONFIG_FILE opt_config.h 121 122# Options for static file systems. These should only be used at config 123# time, since the corresponding lkms cannot work if there are any static 124# dependencies. Unusability is enforced by hiding the defines for the 125# options in a never-included header. 126EXT2FS opt_dontuse.h 127FDESC opt_dontuse.h 128HAMMER opt_dontuse.h 129HPFS opt_dontuse.h 130MFS opt_dontuse.h 131MSDOSFS opt_dontuse.h 132NTFS opt_dontuse.h 133NULLFS opt_dontuse.h 134PORTAL opt_dontuse.h 135PROCFS opt_dontuse.h 136PUFFS opt_dontuse.h 137SMBFS opt_dontuse.h 138TMPFS opt_dontuse.h 139UDF opt_dontuse.h 140 141# These static filesystems has one slightly bogus static dependency in 142# sys/platform/.../i386/autoconf.c. If any of these filesystems are 143# statically compiled into the kernel, code for mounting them as root 144# filesystems will be enabled - but look below. Boot-code is purposely 145# unavailable for the LKM-based versions. 146CD9660 147FFS 148NFS 149 150# filesystems and libiconv bridge 151CD9660_ICONV opt_dontuse.h 152MSDOSFS_ICONV opt_dontuse.h 153NTFS_ICONV opt_dontuse.h 154 155# SMB/CIFS requester 156NETSMB opt_netsmb.h 157NETSMBCRYPTO opt_netsmb.h 158 159# If you are following the conditions in the copyright, 160# you can enable soft-updates which will speed up a lot of things 161# and make the system safer from crashes at the same time. 162# otherwise a STUB module will be compiled in. 163SOFTUPDATES opt_ffs.h 164 165# Enable fast hash lookups for large directories on UFS-based filesystems. 166UFS_DIRHASH opt_ufs.h 167 168# The above static dependencies are planned removed, with a 169# <filesystem>_ROOT option to control if it usable as root. This list 170# allows these options to be present in config files already (though 171# they won't make any difference yet). 172FFS_ROOT opt_ffs.h 173NFS_ROOT opt_nfsroot.h 174 175# The union static file system has bogus static dependencies, so it isn't 176# hidden yet. 177UNION 178 179# Options used only in subr_param.c. 180HZ opt_param.h 181MAXFILES opt_param.h 182NBUF opt_param.h 183NMBCLUSTERS opt_param.h 184NMBUFS opt_param.h 185VM_BCACHE_SIZE_MAX opt_param.h 186VM_SWZONE_SIZE_MAX opt_param.h 187MAXUSERS 188DFLDSIZ opt_param.h 189MAXDSIZ opt_param.h 190MAXSSIZ opt_param.h 191 192# Generic SCSI options. 193CAM_MAX_HIGHPOWER opt_cam.h 194CAMDEBUG opt_cam.h 195CAM_DEBUG_DELAY opt_cam.h 196CAM_DEBUG_BUS opt_cam.h 197CAM_DEBUG_TARGET opt_cam.h 198CAM_DEBUG_LUN opt_cam.h 199CAM_DEBUG_FLAGS opt_cam.h 200SCSI_DELAY opt_scsi.h 201SCSI_NO_SENSE_STRINGS opt_scsi.h 202SCSI_NO_OP_STRINGS opt_scsi.h 203 204# iSCSI options 205ISCSI_INITIATOR_DEBUG opt_iscsi_initiator.h 206 207# Options used only in cam/scsi/scsi_cd.c 208CHANGER_MIN_BUSY_SECONDS opt_cd.h 209CHANGER_MAX_BUSY_SECONDS opt_cd.h 210 211# Options used only in cam/scsi/scsi_sa.c. 212SA_IO_TIMEOUT opt_sa.h 213SA_SPACE_TIMEOUT opt_sa.h 214SA_REWIND_TIMEOUT opt_sa.h 215SA_ERASE_TIMEOUT opt_sa.h 216SA_1FM_AT_EOD opt_sa.h 217 218# Options used only in cam/scsi/scsi_pt.c 219SCSI_PT_DEFAULT_TIMEOUT opt_pt.h 220 221# Options used only in cam/scsi/scsi_ses.c 222SES_ENABLE_PASSTHROUGH opt_ses.h 223 224# Options used in dev/sym/ (Symbios SCSI driver). 225SYM_SETUP_LP_PROBE_MAP opt_sym.h #-Low Priority Probe Map (bits) 226 # Allows the ncr to take precedence 227 # 1 (1<<0) -> 810a, 860 228 # 2 (1<<1) -> 825a, 875, 885, 895 229 # 4 (1<<2) -> 895a, 896, 1510d 230SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885 231 # disabled:0 (default), enabled:1 232SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking 233 # disabled:0, enabled:1 (default) 234SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported 235 # default:8, range:[1..64] 236 237# Options used only in pci/ncr.c 238SCSI_NCR_DEBUG opt_ncr.h 239SCSI_NCR_MAX_SYNC opt_ncr.h 240SCSI_NCR_MAX_WIDE opt_ncr.h 241SCSI_NCR_MYADDR opt_ncr.h 242 243# Options used only in pci/isp_pci.c 244ISP_TARGET_MODE opt_isp.h 245 246# Options used in the 'nata' ATA/ATAPI driver 247ATA_STATIC_ID opt_ata.h 248 249# Net stuff. 250# altq stuff 251ALTQ opt_global.h 252ALTQ_CBQ opt_altq.h 253ALTQ_RED opt_altq.h 254ALTQ_RIO opt_altq.h 255ALTQ_HFSC opt_altq.h 256ALTQ_PRIQ opt_altq.h 257ALTQ_FAIRQ opt_altq.h 258ALTQ_NOPCC opt_altq.h 259ALTQ_DEBUG opt_altq.h 260 261ACCEPT_FILTER_DATA 262ACCEPT_FILTER_HTTP 263BOOTP opt_bootp.h 264BOOTP_COMPAT opt_bootp.h 265BOOTP_NFSROOT opt_bootp.h 266BOOTP_NFSV3 opt_bootp.h 267BOOTP_WIRED_TO opt_bootp.h 268CARP opt_carp.h 269MROUTING opt_mrouting.h 270PIM opt_mrouting.h 271INET opt_inet.h 272INET6 opt_inet6.h 273IPSEC opt_ipsec.h 274IPSEC_ESP opt_ipsec.h 275IPSEC_DEBUG opt_ipsec.h 276IPSEC_FILTERGIF opt_ipsec.h 277FAST_IPSEC opt_ipsec.h 278IPDIVERT 279DUMMYNET opt_ipdn.h 280DUMMYNET_DEBUG opt_ipdn.h 281IPFIREWALL opt_ipfw.h 282IPFIREWALL_DEBUG opt_ipfw.h 283IPFIREWALL_VERBOSE opt_ipfw.h 284IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h 285IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h 286IPV6FIREWALL opt_ip6fw.h 287IPV6FIREWALL_VERBOSE opt_ip6fw.h 288IPV6FIREWALL_VERBOSE_LIMIT opt_ip6fw.h 289IPV6FIREWALL_DEFAULT_TO_ACCEPT opt_ip6fw.h 290IPSTEALTH 291LIBMCHAIN 292MPLS opt_mpls.h 293PPP_BSDCOMP opt_ppp.h 294PPP_DEFLATE opt_ppp.h 295PPP_FILTER opt_ppp.h 296SLIP_IFF_OPTS opt_slip.h 297TCPDEBUG 298TCP_SIGNATURE opt_inet.h 299TCP_DROP_SYNFIN opt_tcp_input.h 300ICMPPRINTFS 301 302XBONEHACK 303MBUF_STRESS_TEST opt_mbuf_stress_test.h 304 305# (New netgraph, port still in progress) 306# 307# Netgraph(4). Use option NETGRAPH7 to enable the base netgraph code. 308# Each netgraph node type can be either be compiled into the kernel 309# or loaded dynamically. To get the former, include the corresponding 310# option below. Each type has its own man page, e.g. ng_async(4). 311NETGRAPH7 312NETGRAPH7_DEBUG opt_netgraph.h 313NETGRAPH7_ASYNC opt_netgraph.h 314NETGRAPH7_ATMLLC opt_netgraph.h 315NETGRAPH7_ATM_ATMPIF opt_netgraph.h 316NETGRAPH7_BLUETOOTH opt_netgraph.h 317NETGRAPH7_BLUETOOTH_BT3C opt_netgraph.h 318NETGRAPH7_BLUETOOTH_H4 opt_netgraph.h 319NETGRAPH7_BLUETOOTH_HCI opt_netgraph.h 320NETGRAPH7_BLUETOOTH_L2CAP opt_netgraph.h 321NETGRAPH7_BLUETOOTH_SOCKET opt_netgraph.h 322NETGRAPH7_BLUETOOTH_UBT opt_netgraph.h 323NETGRAPH7_BLUETOOTH_UBTBCMFW opt_netgraph.h 324NETGRAPH7_BPF opt_netgraph.h 325NETGRAPH7_BRIDGE opt_netgraph.h 326NETGRAPH7_CAR opt_netgraph.h 327NETGRAPH7_CISCO opt_netgraph.h 328NETGRAPH7_DEFLATE opt_netgraph.h 329NETGRAPH7_DEVICE opt_netgraph.h 330NETGRAPH7_ECHO opt_netgraph.h 331NETGRAPH7_EIFACE opt_netgraph.h 332NETGRAPH7_ETF opt_netgraph.h 333NETGRAPH7_ETHER opt_netgraph.h 334NETGRAPH7_FEC opt_netgraph.h 335NETGRAPH7_FRAME_RELAY opt_netgraph.h 336NETGRAPH7_GIF opt_netgraph.h 337NETGRAPH7_GIF_DEMUX opt_netgraph.h 338NETGRAPH7_HOLE opt_netgraph.h 339NETGRAPH7_HUB opt_netgraph.h 340NETGRAPH7_IFACE opt_netgraph.h 341NETGRAPH7_IP_INPUT opt_netgraph.h 342NETGRAPH7_IPFW opt_netgraph.h 343NETGRAPH7_KSOCKET opt_netgraph.h 344NETGRAPH7_L2TP opt_netgraph.h 345NETGRAPH7_LMI opt_netgraph.h 346# MPPC compression requires proprietary files (not included) 347NETGRAPH7_MPPC_COMPRESSION opt_netgraph.h 348NETGRAPH7_MPPC_ENCRYPTION opt_netgraph.h 349NETGRAPH7_NAT opt_netgraph.h 350NETGRAPH7_NETFLOW opt_netgraph.h 351NETGRAPH7_ONE2MANY opt_netgraph.h 352NETGRAPH7_PPP opt_netgraph.h 353NETGRAPH7_PPPOE opt_netgraph.h 354NETGRAPH7_PPTPGRE opt_netgraph.h 355NETGRAPH7_PRED1 opt_netgraph.h 356NETGRAPH7_RFC1490 opt_netgraph.h 357NETGRAPH7_SOCKET opt_netgraph.h 358NETGRAPH7_SPLIT opt_netgraph.h 359NETGRAPH7_SPPP opt_netgraph.h 360NETGRAPH7_TAG opt_netgraph.h 361NETGRAPH7_TCPMSS opt_netgraph.h 362NETGRAPH7_TEE opt_netgraph.h 363NETGRAPH7_TTY opt_netgraph.h 364NETGRAPH7_UI opt_netgraph.h 365NETGRAPH7_VJC opt_netgraph.h 366 367# NgATM options 368NGATM7_ATM opt_netgraph.h 369NGATM7_ATMBASE opt_netgraph.h 370NGATM7_SSCOP opt_netgraph.h 371NGATM7_SSCFU opt_netgraph.h 372NGATM7_UNI opt_netgraph.h 373NGATM7_CCATM opt_netgraph.h 374 375# Netgraph(4). Use option NETGRAPH to enable the base netgraph code. 376# Each netgraph node type can be either be compiled into the kernel 377# or loaded dynamically. To get the former, include the corresponding 378# option below. Each type has its own man page, e.g. ng_async(8). 379NETGRAPH 380NETGRAPH_ASYNC opt_netgraph.h 381NETGRAPH_BPF opt_netgraph.h 382NETGRAPH_BRIDGE opt_netgraph.h 383NETGRAPH_CISCO opt_netgraph.h 384NETGRAPH_ECHO opt_netgraph.h 385NETGRAPH_EIFACE opt_netgraph.h 386NETGRAPH_ETHER opt_netgraph.h 387NETGRAPH_FEC opt_netgraph.h 388NETGRAPH_FRAME_RELAY opt_netgraph.h 389NETGRAPH_HOLE opt_netgraph.h 390NETGRAPH_IFACE opt_netgraph.h 391NETGRAPH_KSOCKET opt_netgraph.h 392NETGRAPH_LMI opt_netgraph.h 393NETGRAPH_L2TP opt_netgraph.h 394# MPPC compression requires proprietary files (not included) 395NETGRAPH_MPPC_COMPRESSION opt_netgraph.h 396NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h 397NETGRAPH_ONE2MANY opt_netgraph.h 398NETGRAPH_PPP opt_netgraph.h 399NETGRAPH_PPPOE opt_netgraph.h 400NETGRAPH_PPTPGRE opt_netgraph.h 401NETGRAPH_RFC1490 opt_netgraph.h 402NETGRAPH_SOCKET opt_netgraph.h 403NETGRAPH_TEE opt_netgraph.h 404NETGRAPH_TTY opt_netgraph.h 405NETGRAPH_UI opt_netgraph.h 406NETGRAPH_VJC opt_netgraph.h 407 408# AGP options 409AGP_DEBUG opt_agp.h 410 411# DRM options 412DRM_DEBUG opt_drm.h 413DRM_LINUX opt_drm.h 414 415# DPT driver debug flags 416DPT_MEASURE_PERFORMANCE opt_dpt.h 417DPT_HANDLE_TIMEOUTS opt_dpt.h 418DPT_TIMEOUT_FACTOR opt_dpt.h 419DPT_LOST_IRQ opt_dpt.h 420DPT_RESET_HBA opt_dpt.h 421 422# Misc debug flags. Most of these should probably be replaced with 423# 'DEBUG', and then let people recompile just the interesting modules 424# with 'make CC="cc -DDEBUG"'. 425CLUSTERDEBUG opt_debug_cluster.h 426DEBUG_1284 opt_ppb_1284.h 427VP0_DEBUG opt_vpo.h 428LPT_DEBUG opt_lpt.h 429PLIP_DEBUG opt_plip.h 430LOCKF_DEBUG opt_debug_lockf.h 431SI_DEBUG opt_debug_si.h 432 433# Fb options 434FB_DEBUG opt_fb.h 435FB_INSTALL_CDEV opt_fb.h 436 437# ppbus related options 438PERIPH_1284 opt_ppb_1284.h 439DONTPROBE_1284 opt_ppb_1284.h 440 441# smbus related options 442ENABLE_ALART opt_intpm.h 443 444# These cause changes all over the kernel 445NO_LWKT_SPLIT_USERPRI opt_global.h 446BLKDEV_IOSIZE opt_global.h 447DEBUG opt_global.h 448DEBUG_LOCKS opt_global.h 449DEBUG_LOCKS_LATENCY opt_global.h 450DEBUG_CRIT_SECTIONS opt_global.h 451DIAGNOSTIC opt_global.h 452INVARIANTS opt_global.h 453VFS_BIO_DEBUG opt_global.h 454DEBUG_INTERRUPTS opt_global.h 455SOCKBUF_DEBUG opt_global.h 456PANIC_DEBUG opt_global.h 457MBUF_DEBUG opt_global.h 458PMAP_DEBUG opt_global.h 459VM_PAGE_DEBUG opt_global.h 460SLAB_DEBUG opt_global.h 461 462# Sample system/interrupt PC 463DEBUG_PCTRACK opt_pctrack.h 464 465# These are VM related options 466NO_SWAPPING opt_vm.h 467 468# sys/netkey 469KEY 470 471# Size of the kernel message buffer 472MSGBUF_SIZE opt_msgbuf.h 473 474# PCI related options 475COMPAT_OLDPCI 476 477# NFS options 478NFS_MINATTRTIMO opt_nfs.h 479NFS_MAXATTRTIMO opt_nfs.h 480NFS_MINDIRATTRTIMO opt_nfs.h 481NFS_MAXDIRATTRTIMO opt_nfs.h 482NFS_GATHERDELAY opt_nfs.h 483NFS_UIDHASHSIZ opt_nfs.h 484NFS_WDELAYHASHSIZ opt_nfs.h 485NFS_MUIDHASHSIZ opt_nfs.h 486NFS_NOSERVER opt_nfs.h 487NFS_DEBUG opt_nfs.h 488 489# MSDOSFS options 490MSDOSFS_DEBUG opt_msdosfs.h 491 492# For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver 493BROOKTREE_SYSTEM_DEFAULT opt_bktr.h 494BROOKTREE_ALLOC_PAGES opt_bktr.h 495BKTR_OVERRIDE_CARD opt_bktr.h 496BKTR_OVERRIDE_TUNER opt_bktr.h 497BKTR_OVERRIDE_DBX opt_bktr.h 498BKTR_OVERRIDE_MSP opt_bktr.h 499BKTR_SYSTEM_DEFAULT opt_bktr.h 500BKTR_ALLOC_PAGES opt_bktr.h 501BKTR_USE_PLL opt_bktr.h 502BKTR_GPIO_ACCESS opt_bktr.h 503BKTR_NO_MSP_RESET opt_bktr.h 504BKTR_430_FX_MODE opt_bktr.h 505BKTR_SIS_VIA_MODE opt_bktr.h 506BKTR_NEW_MSP34XX_DRIVER opt_bktr.h 507 508# Various mi ISA bus flags 509COM_ESP opt_sio.h 510COM_MULTIPORT opt_sio.h 511BREAK_TO_DEBUGGER opt_comconsole.h 512ALT_BREAK_TO_DEBUGGER opt_comconsole.h 513 514# options for bus/device framework 515BUS_DEBUG opt_bus.h 516 517# options for USB support 518OHCI_DEBUG opt_usb.h 519USB_DEBUG opt_usb.h 520 521# Vinum options 522VINUMDEBUG opt_vinum.h 523 524# Embedded system options 525UKBD_DFLT_KEYMAP opt_ukbd.h 526INIT_PATH opt_init_path.h 527 528ROOTDEVNAME opt_rootdevname.h 529 530FDC_DEBUG opt_fdc.h 531PCFCLOCK_VERBOSE opt_pcfclock.h 532PCFCLOCK_MAX_RETRIES opt_pcfclock.h 533 534# Network device queue based polling 535IFPOLL_ENABLE opt_ifpoll.h 536 537# options for ubsec driver 538UBSEC_DEBUG opt_ubsec.h 539UBSEC_RNDTEST opt_ubsec.h 540UBSEC_NO_RNG opt_ubsec.h 541 542# options for hifn driver 543HIFN_DEBUG opt_hifn.h 544HIFN_RNDTEST opt_hifn.h 545HIFN_NO_RNG opt_hifn.h 546 547# options for safenet driver 548SAFE_DEBUG opt_safe.h 549SAFE_NO_RNG opt_safe.h 550SAFE_RNDTEST opt_safe.h 551 552# KTR options 553KTR opt_global.h 554KTR_ENTRIES opt_global.h 555KTR_ALL opt_ktr.h 556KTR_ACPI_EC opt_ktr.h 557KTR_CTXSW opt_ktr.h 558KTR_DMCRYPT opt_ktr.h 559KTR_DSCHED_BFQ opt_ktr.h 560KTR_ETHERNET opt_ktr.h 561KTR_HAMMER opt_ktr.h 562KTR_IFQ opt_ktr.h 563KTR_IF_BGE opt_ktr.h 564KTR_IF_EM opt_ktr.h 565KTR_IF_EMX opt_ktr.h 566KTR_IF_START opt_ktr.h 567KTR_IPIQ opt_ktr.h 568KTR_KERNENTRY opt_ktr.h 569KTR_MEMORY opt_ktr.h 570KTR_SERIALIZER opt_ktr.h 571KTR_SPIN_CONTENTION opt_ktr.h 572KTR_TESTLOG opt_ktr.h 573KTR_TOKENS opt_ktr.h 574KTR_TSLEEP opt_ktr.h 575KTR_USCHED_BSD4 opt_ktr.h 576KTR_USCHED_DFLY opt_ktr.h 577KTR_VERBOSE opt_ktr.h 578KTR_IF_POLL opt_ktr.h 579KTR_UDP opt_ktr.h 580KTR_SOWAKEUP opt_ktr.h 581 582# NTFS options 583NTFS_DEBUG opt_ntfs.h 584 585# options for the Atheros driver 586ATH_DEBUG opt_ath.h 587#ATH_DEBUG_ALQ opt_ath.h 588ATH_DIAGAPI opt_ath.h 589#ATH_EEPROM_FIRMWARE opt_ath.h 590#ATH_ENABLE_11N opt_ath.h 591ATH_ENABLE_DFS opt_ath.h 592#ATH_ENABLE_RADIOTAP_VENDOR_EXT opt_ath.h 593ATH_KTR_INTR_DEBUG opt_ath.h 594ATH_RXBUF opt_ath.h 595#ATH_TX99_DIAG opt_ath.h 596ATH_TXBUF opt_ath.h 597 598# ...and its HAL 599AH_AR5416_INTERRUPT_MITIGATION opt_ah.h 600AH_ASSERT opt_ah.h 601AH_DEBUG opt_ah.h 602#AH_DEBUG_ALQ opt_ah.h 603#AH_DEBUG_COUNTRY opt_ah.h 604AH_INTERRUPT_DEBUGGING opt_ah.h 605AH_MAXCHAN opt_ah.h 606AH_NEED_DESC_SWAP opt_ah.h 607AH_PRIVATE_DIAG opt_ah.h 608AH_REGOPS_FUNC opt_ah.h 609AH_RXCFG_SDMAMW_4BYTES opt_ah.h 610AH_SUPPORT_AR5416 opt_ah.h 611AH_SUPPORT_AR9130 opt_ah.h 612AH_SUPPORT_AR9330 opt_ah.h 613AH_SUPPORT_AR9340 opt_ah.h 614AH_USE_INIPDGAIN opt_ah.h 615#AH_WRITE_EEPROM opt_ah.h 616#AH_WRITE_REGDOMAIN opt_ah.h 617 618# bce driver 619BCE_RSS_DEBUG opt_bce.h 620BCE_TSS_DEBUG opt_bce.h 621 622# bnx driver 623BNX_RSS_DEBUG opt_bnx.h 624BNX_TSO_DEBUG opt_bnx.h 625BNX_TSS_DEBUG opt_bnx.h 626 627# bwn driver 628BWN_DEBUG opt_bwn.h 629BWN_RXRING_SLOTS opt_bwn.h 630BWN_TXRING_SLOTS opt_bwn.h 631 632# siba_bwn driver 633SIBA_DEBUG opt_siba.h 634 635# ed driver 636ED_NO_MIIBUS opt_ed.h 637 638# emx driver 639EMX_RSS_DEBUG opt_emx.h 640EMX_TSO_DEBUG opt_emx.h 641EMX_TSS_DEBUG opt_emx.h 642 643# jme driver 644JME_RSS_DEBUG opt_jme.h 645 646# igb driver 647IGB_RSS_DEBUG opt_igb.h 648IGB_TSS_DEBUG opt_igb.h 649IGB_MSIX_DEBUG opt_igb.h 650 651# ix driver 652IX_RSS_DEBUG opt_ix.h 653 654# Options for the Intel 802.11n wireless driver 655IWN_DEBUG opt_iwn.h 656 657# dcons options 658DCONS_BUF_SIZE opt_dcons.h 659DCONS_POLL_HZ opt_dcons.h 660DCONS_FORCE_CONSOLE opt_dcons.h 661DCONS_FORCE_GDB opt_dcons.h 662 663# deprecated drivers and options 664I_WANT_DEPRECATED_STUFF opt_deprecated.h 665 666# DSCHED stuff 667DSCHED_AS opt_dsched.h 668DSCHED_BFQ opt_dsched.h 669DSCHED_FQ opt_dsched.h 670 671# Receive Side Scaling (now basecode) 672RSS_DEBUG opt_rss.h 673 674# Panic settings 675WDOG_DISABLE_ON_PANIC opt_panic.h 676ERROR_LED_ON_PANIC opt_panic.h 677 678# 802.11 support layer 679IEEE80211_DEBUG opt_wlan.h 680IEEE80211_DEBUG_REFCNT opt_wlan.h 681IEEE80211_AMPDU_AGE opt_wlan.h 682IEEE80211_SUPPORT_MESH opt_wlan.h 683IEEE80211_SUPPORT_SUPERG opt_wlan.h 684IEEE80211_SUPPORT_TDMA opt_wlan.h 685 686# 802.11 TDMA support 687TDMA_SLOTLEN_DEFAULT opt_tdma.h 688TDMA_SLOTCNT_DEFAULT opt_tdma.h 689TDMA_BINTVAL_DEFAULT opt_tdma.h 690TDMA_TXRATE_11B_DEFAULT opt_tdma.h 691TDMA_TXRATE_11G_DEFAULT opt_tdma.h 692TDMA_TXRATE_11A_DEFAULT opt_tdma.h 693TDMA_TXRATE_TURBO_DEFAULT opt_tdma.h 694TDMA_TXRATE_HALF_DEFAULT opt_tdma.h 695TDMA_TXRATE_QUARTER_DEFAULT opt_tdma.h 696TDMA_TXRATE_11NA_DEFAULT opt_tdma.h 697TDMA_TXRATE_11NG_DEFAULT opt_tdma.h 698 699PANIC_REBOOT_WAIT_TIME opt_panic.h 700 701# Obsolete options (will be removed in the future) 702# 703SYSVMSG opt_dontuse.h 704SYSVSEM opt_dontuse.h 705SYSVSHM opt_dontuse.h 706