1# $FreeBSD: src/sys/conf/options,v 1.191.2.53 2003/06/04 17:56:58 sam Exp $ 2# 3# On the handling of kernel options 4# 5# All kernel options should be listed in LINT, with suitable 6# descriptions. Negative options (options that make some code not 7# compile) should be commented out; LINT should compile as much code 8# as possible. Try to structure option-using code so that a single 9# option only switch code on, or only switch code off, to make it 10# possible to have a full compile-test. If necessary, you can include 11# "opt_lint.h" and check for COMPILING_LINT to get maximum code 12# coverage. 13# 14# All new options shall also be listed in either "conf/options" or 15# "platform/<platform>/conf/options". Options that affect a single 16# source-file <xxx>.[c|s] should be directed into "opt_<xxx>.h", while 17# options that affect multiple files should either go in 18# "opt_global.h" if this is a kernel-wide option (used just about 19# everywhere), or in "opt_<option-name-in-lower-case>.h" if it affect 20# only some files. Note that the effect of listing only an option 21# without a header-file-name in conf/options (and cousins) is that the 22# last convention is followed. 23# 24# This handling scheme is not yet fully implemented. 25# 26# 27# Format of this file: 28# Option name filename 29# 30# If filename is missing, the default is 31# opt_<name-of-option-in-lower-case>.h 32 33# Adaptec Array Controller driver options 34AAC_DEBUG opt_aac.h # Debugging levels: 35 # 0 - quiet, only emit warnings 36 # 1 - noisy, emit major function 37 # points and things done 38 # 2 - noisier, emit trace items 39 # in loops, etc. 40 # 3 - even more noisy, more function 41 # points 42 # 4 - noisiest 43 44# Adaptec aic7xxx SCSI controller options 45AHC_ALLOW_MEMIO opt_aic7xxx.h # Allow PCI devices to use memory 46 # mapped I/O 47 48AHC_TMODE_ENABLE opt_aic7xxx.h # Bitmap of units to enable 49 # targetmode operations. 50 51AHC_DUMP_EEPROM opt_aic7xxx.h # Dump the contents of our 52 # configuration prom. 53 54AHC_DEBUG opt_aic7xxx.h # Compile in Aic7xxx Debugging code. 55 56AHC_DEBUG_OPTS opt_aic7xxx.h # Aic7xxx driver debugging options. 57 # See sys/dev/aic7xxx/aic7xxx.h 58 59AHC_REG_PRETTY_PRINT opt_aic7xxx.h # Print register bitfields in debug 60 # output. Adds ~15k to driver. 61 62# Adaptec aic79xx SCSI controller options 63AHD_DEBUG opt_aic79xx.h # Compile in Aic79xx Debugging code. 64 65AHD_DEBUG_OPTS opt_aic79xx.h # Aic79xx driver debugging options. 66 # See sys/dev/aic7xxx/aic79xx.h 67 68AHD_TMODE_ENABLE opt_aic79xx.h # Bitmap of units to enable 69 # targetmode operations. 70 71AHD_REG_PRETTY_PRINT opt_aic79xx.h # Print register bitfields in debug 72 # output. Adds ~15k to driver. 73 74ADW_ALLOW_MEMIO opt_adw.h # Allow PCI devices to use memory 75 # mapped I/O 76TWA_DEBUG opt_twa.h 77 78#options for ACPI support 79ACPI_DEBUG opt_acpi.h 80ACPI_NO_SEMAPHORES opt_acpi.h 81ACPI_ENABLE_PCI opt_acpi.h 82 83# Miscellaneous options. 84COMPAT_DF12 opt_compatdf12.h 85COMPAT_43 opt_compat.h 86COMPAT_SUNOS opt_compat.h 87COMPILING_LINT opt_lint.h 88DDB 89DDB_TRACE 90DDB_UNATTENDED opt_ddb.h 91GDB_REMOTE_CHAT opt_ddb.h 92HW_WDOG 93KTRACE 94LIBICONV 95MD_NSECT opt_md.h 96MD_ROOT opt_md.h 97MD_ROOT_SIZE opt_md.h 98NSWAPDEV opt_swap.h 99NSWBUF_MIN opt_swap.h 100PPS_SYNC opt_ntp.h 101QUOTA 102SUIDDIR opt_suiddir.h 103SYSVMSG opt_sysvipc.h 104SYSVSEM opt_sysvipc.h 105SYSVSHM opt_sysvipc.h 106SHMALL opt_sysvipc.h 107SHMMAX opt_sysvipc.h 108SHMMAXPGS opt_sysvipc.h 109SHMMIN opt_sysvipc.h 110SHMMNI opt_sysvipc.h 111SHMSEG opt_sysvipc.h 112SEMMAP opt_sysvipc.h 113SEMMNI opt_sysvipc.h 114SEMMNS opt_sysvipc.h 115SEMMNU opt_sysvipc.h 116SEMMSL opt_sysvipc.h 117SEMOPM opt_sysvipc.h 118SEMUME opt_sysvipc.h 119MSGMNB opt_sysvipc.h 120MSGMNI opt_sysvipc.h 121MSGSEG opt_sysvipc.h 122MSGSSZ opt_sysvipc.h 123MSGTQL opt_sysvipc.h 124UCONSOLE 125ICMP_BANDLIM 126SHOW_BUSYBUFS 127VFS_AIO 128DIRECTIO opt_directio.h 129 130# POSIX kernel options 131P1003_1B opt_posix.h 132_KPOSIX_PRIORITY_SCHEDULING opt_posix.h 133_KPOSIX_VERSION opt_posix.h 134 135# Do we want the config file compiled into the kernel? 136INCLUDE_CONFIG_FILE opt_config.h 137 138# Options for static file systems. These should only be used at config 139# time, since the corresponding lkms cannot work if there are any static 140# dependencies. Unusability is enforced by hiding the defines for the 141# options in a never-included header. 142EXT2FS opt_dontuse.h 143FDESC opt_dontuse.h 144MFS opt_dontuse.h 145MSDOSFS opt_dontuse.h 146NULLFS opt_dontuse.h 147PORTAL opt_dontuse.h 148PROCFS opt_dontuse.h 149UDF opt_dontuse.h 150NTFS opt_dontuse.h 151#TMPFS opt_dontuse.h 152 153# These static filesystems has one slightly bogus static dependency in 154# sys/platform/.../i386/autoconf.c. If any of these filesystems are 155# statically compiled into the kernel, code for mounting them as root 156# filesystems will be enabled - but look below. Boot-code is purposely 157# unavailable for the LKM-based versions. 158CD9660 159FFS 160NFS 161NWFS 162USERFS 163TMPFS 164HAMMER 165 166# If you are following the conditions in the copyright, 167# you can enable soft-updates which will speed up a lot of things 168# and make the system safer from crashes at the same time. 169# otherwise a STUB module will be compiled in. 170SOFTUPDATES opt_ffs.h 171 172# Enable fast hash lookups for large directories on UFS-based filesystems. 173UFS_DIRHASH opt_ufs.h 174 175# The above static dependencies are planned removed, with a 176# <filesystem>_ROOT option to control if it usable as root. This list 177# allows these options to be present in config files already (though 178# they won't make any difference yet). 179FFS_ROOT opt_ffs.h 180NFS_ROOT opt_nfsroot.h 181 182# The union static file system has bogus static dependencies, so it isn't 183# hidden yet. 184UNION 185 186# Options used only in subr_param.c. 187HZ opt_param.h 188MAXFILES opt_param.h 189NBUF opt_param.h 190NMBCLUSTERS opt_param.h 191NMBUFS opt_param.h 192VM_BCACHE_SIZE_MAX opt_param.h 193VM_SWZONE_SIZE_MAX opt_param.h 194MAXUSERS 195DFLDSIZ opt_param.h 196MAXDSIZ opt_param.h 197MAXSSIZ opt_param.h 198 199# Generic SCSI options. 200CAM_MAX_HIGHPOWER opt_cam.h 201CAMDEBUG opt_cam.h 202CAM_DEBUG_DELAY opt_cam.h 203CAM_DEBUG_BUS opt_cam.h 204CAM_DEBUG_TARGET opt_cam.h 205CAM_DEBUG_LUN opt_cam.h 206CAM_DEBUG_FLAGS opt_cam.h 207SCSI_DELAY opt_scsi.h 208SCSI_NO_SENSE_STRINGS opt_scsi.h 209SCSI_NO_OP_STRINGS opt_scsi.h 210 211# iSCSI options 212ISCSI_INITIATOR_DEBUG opt_iscsi_initiator.h 213 214# Options used only in cam/scsi/scsi_cd.c 215CHANGER_MIN_BUSY_SECONDS opt_cd.h 216CHANGER_MAX_BUSY_SECONDS opt_cd.h 217 218# Options used only in cam/scsi/scsi_sa.c. 219SA_IO_TIMEOUT opt_sa.h 220SA_SPACE_TIMEOUT opt_sa.h 221SA_REWIND_TIMEOUT opt_sa.h 222SA_ERASE_TIMEOUT opt_sa.h 223SA_1FM_AT_EOD opt_sa.h 224 225# Options used only in cam/scsi/scsi_pt.c 226SCSI_PT_DEFAULT_TIMEOUT opt_pt.h 227 228# Options used only in cam/scsi/scsi_ses.c 229SES_ENABLE_PASSTHROUGH opt_ses.h 230 231# Options used in dev/sym/ (Symbios SCSI driver). 232SYM_SETUP_LP_PROBE_MAP opt_sym.h #-Low Priority Probe Map (bits) 233 # Allows the ncr to take precedence 234 # 1 (1<<0) -> 810a, 860 235 # 2 (1<<1) -> 825a, 875, 885, 895 236 # 4 (1<<2) -> 895a, 896, 1510d 237SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885 238 # disabled:0 (default), enabled:1 239SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking 240 # disabled:0, enabled:1 (default) 241SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported 242 # default:8, range:[1..64] 243 244# Options used only in pci/ncr.c 245SCSI_NCR_DEBUG opt_ncr.h 246SCSI_NCR_MAX_SYNC opt_ncr.h 247SCSI_NCR_MAX_WIDE opt_ncr.h 248SCSI_NCR_MYADDR opt_ncr.h 249 250# Options used only in pci/isp_pci.c 251ISP_TARGET_MODE opt_isp.h 252 253# Options used in the 'ata' ATA/ATAPI driver 254ATA_STATIC_ID opt_ata.h 255 256# Net stuff. 257# altq stuff 258ALTQ opt_global.h 259ALTQ_CBQ opt_altq.h 260ALTQ_RED opt_altq.h 261ALTQ_RIO opt_altq.h 262ALTQ_HFSC opt_altq.h 263ALTQ_PRIQ opt_altq.h 264ALTQ_FAIRQ opt_altq.h 265ALTQ_NOPCC opt_altq.h 266ALTQ_DEBUG opt_altq.h 267 268ACCEPT_FILTER_DATA 269ACCEPT_FILTER_HTTP 270BOOTP opt_bootp.h 271BOOTP_COMPAT opt_bootp.h 272BOOTP_NFSROOT opt_bootp.h 273BOOTP_NFSV3 opt_bootp.h 274BOOTP_WIRED_TO opt_bootp.h 275CARP opt_carp.h 276ETHER_II opt_ef.h 277ETHER_8023 opt_ef.h 278ETHER_8022 opt_ef.h 279ETHER_SNAP opt_ef.h 280MROUTING opt_mrouting.h 281PIM opt_mrouting.h 282INET opt_inet.h 283INET6 opt_inet6.h 284IPSEC opt_ipsec.h 285IPSEC_ESP opt_ipsec.h 286IPSEC_DEBUG opt_ipsec.h 287IPSEC_FILTERGIF opt_ipsec.h 288FAST_IPSEC opt_ipsec.h 289IPDIVERT 290DUMMYNET opt_ipdn.h 291DUMMYNET_DEBUG opt_ipdn.h 292IPFILTER opt_ipfilter.h 293IPFILTER_LOG opt_ipfilter.h 294IPFILTER_DEFAULT_BLOCK opt_ipfilter.h 295IPFIREWALL opt_ipfw.h 296IPFIREWALL_DEBUG opt_ipfw.h 297IPFIREWALL_VERBOSE opt_ipfw.h 298IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h 299IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h 300IPFIREWALL_FORWARD opt_ipfw.h 301IPV6FIREWALL opt_ip6fw.h 302IPV6FIREWALL_VERBOSE opt_ip6fw.h 303IPV6FIREWALL_VERBOSE_LIMIT opt_ip6fw.h 304IPV6FIREWALL_DEFAULT_TO_ACCEPT opt_ip6fw.h 305IPSTEALTH 306IPX opt_ipx.h 307IPXIP opt_ipx.h 308IPTUNNEL opt_ipx.h 309LIBMCHAIN 310MPLS opt_mpls.h 311NCP opt_ncp.h 312NETATALK opt_atalk.h 313NS opt_ns.h 314PPP_BSDCOMP opt_ppp.h 315PPP_DEFLATE opt_ppp.h 316PPP_FILTER opt_ppp.h 317SLIP_IFF_OPTS opt_slip.h 318TCPDEBUG 319TCP_SIGNATURE opt_inet.h 320TCP_DROP_SYNFIN opt_tcp_input.h 321 322XBONEHACK 323MBUF_STRESS_TEST opt_mbuf_stress_test.h 324 325# (New netgraph, port still in progress) 326# 327# Netgraph(4). Use option NETGRAPH7 to enable the base netgraph code. 328# Each netgraph node type can be either be compiled into the kernel 329# or loaded dynamically. To get the former, include the corresponding 330# option below. Each type has its own man page, e.g. ng_async(4). 331NETGRAPH7 332NETGRAPH7_DEBUG opt_netgraph.h 333NETGRAPH7_ASYNC opt_netgraph.h 334NETGRAPH7_ATMLLC opt_netgraph.h 335NETGRAPH7_ATM_ATMPIF opt_netgraph.h 336NETGRAPH7_BLUETOOTH opt_netgraph.h 337NETGRAPH7_BLUETOOTH_BT3C opt_netgraph.h 338NETGRAPH7_BLUETOOTH_H4 opt_netgraph.h 339NETGRAPH7_BLUETOOTH_HCI opt_netgraph.h 340NETGRAPH7_BLUETOOTH_L2CAP opt_netgraph.h 341NETGRAPH7_BLUETOOTH_SOCKET opt_netgraph.h 342NETGRAPH7_BLUETOOTH_UBT opt_netgraph.h 343NETGRAPH7_BLUETOOTH_UBTBCMFW opt_netgraph.h 344NETGRAPH7_BPF opt_netgraph.h 345NETGRAPH7_BRIDGE opt_netgraph.h 346NETGRAPH7_CAR opt_netgraph.h 347NETGRAPH7_CISCO opt_netgraph.h 348NETGRAPH7_DEFLATE opt_netgraph.h 349NETGRAPH7_DEVICE opt_netgraph.h 350NETGRAPH7_ECHO opt_netgraph.h 351NETGRAPH7_EIFACE opt_netgraph.h 352NETGRAPH7_ETHER opt_netgraph.h 353NETGRAPH7_FEC opt_netgraph.h 354NETGRAPH7_FRAME_RELAY opt_netgraph.h 355NETGRAPH7_GIF opt_netgraph.h 356NETGRAPH7_GIF_DEMUX opt_netgraph.h 357NETGRAPH7_HOLE opt_netgraph.h 358NETGRAPH7_IFACE opt_netgraph.h 359NETGRAPH7_IP_INPUT opt_netgraph.h 360NETGRAPH7_IPFW opt_netgraph.h 361NETGRAPH7_KSOCKET opt_netgraph.h 362NETGRAPH7_L2TP opt_netgraph.h 363NETGRAPH7_LMI opt_netgraph.h 364# MPPC compression requires proprietary files (not included) 365NETGRAPH7_MPPC_COMPRESSION opt_netgraph.h 366NETGRAPH7_MPPC_ENCRYPTION opt_netgraph.h 367NETGRAPH7_NAT opt_netgraph.h 368NETGRAPH7_NETFLOW opt_netgraph.h 369NETGRAPH7_ONE2MANY opt_netgraph.h 370NETGRAPH7_PPP opt_netgraph.h 371NETGRAPH7_PPPOE opt_netgraph.h 372NETGRAPH7_PPTPGRE opt_netgraph.h 373NETGRAPH7_PRED1 opt_netgraph.h 374NETGRAPH7_RFC1490 opt_netgraph.h 375NETGRAPH7_SOCKET opt_netgraph.h 376NETGRAPH7_SPLIT opt_netgraph.h 377NETGRAPH7_SPPP opt_netgraph.h 378NETGRAPH7_TAG opt_netgraph.h 379NETGRAPH7_TCPMSS opt_netgraph.h 380NETGRAPH7_TEE opt_netgraph.h 381NETGRAPH7_TTY opt_netgraph.h 382NETGRAPH7_UI opt_netgraph.h 383NETGRAPH7_VJC opt_netgraph.h 384 385# NgATM options 386NGATM7_ATM opt_netgraph.h 387NGATM7_ATMBASE opt_netgraph.h 388NGATM7_SSCOP opt_netgraph.h 389NGATM7_SSCFU opt_netgraph.h 390NGATM7_UNI opt_netgraph.h 391NGATM7_CCATM opt_netgraph.h 392 393# Netgraph(4). Use option NETGRAPH to enable the base netgraph code. 394# Each netgraph node type can be either be compiled into the kernel 395# or loaded dynamically. To get the former, include the corresponding 396# option below. Each type has its own man page, e.g. ng_async(8). 397NETGRAPH 398NETGRAPH_ASYNC opt_netgraph.h 399NETGRAPH_BPF opt_netgraph.h 400NETGRAPH_BRIDGE opt_netgraph.h 401NETGRAPH_CISCO opt_netgraph.h 402NETGRAPH_ECHO opt_netgraph.h 403NETGRAPH_EIFACE opt_netgraph.h 404NETGRAPH_ETHER opt_netgraph.h 405NETGRAPH_FRAME_RELAY opt_netgraph.h 406NETGRAPH_HOLE opt_netgraph.h 407NETGRAPH_IFACE opt_netgraph.h 408NETGRAPH_KSOCKET opt_netgraph.h 409NETGRAPH_LMI opt_netgraph.h 410NETGRAPH_L2TP opt_netgraph.h 411# MPPC compression requires proprietary files (not included) 412NETGRAPH_MPPC_COMPRESSION opt_netgraph.h 413NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h 414NETGRAPH_ONE2MANY opt_netgraph.h 415NETGRAPH_PPP opt_netgraph.h 416NETGRAPH_PPPOE opt_netgraph.h 417NETGRAPH_PPTPGRE opt_netgraph.h 418NETGRAPH_RFC1490 opt_netgraph.h 419NETGRAPH_SOCKET opt_netgraph.h 420NETGRAPH_TEE opt_netgraph.h 421NETGRAPH_TTY opt_netgraph.h 422NETGRAPH_UI opt_netgraph.h 423NETGRAPH_VJC opt_netgraph.h 424 425# DRM options 426DRM_DEBUG opt_drm.h 427DRM_LINUX opt_drm.h 428 429# ATM (HARP version) 430ATM_CORE opt_atm.h 431ATM_IP opt_atm.h 432ATM_SIGPVC opt_atm.h 433ATM_SPANS opt_atm.h 434ATM_UNI opt_atm.h 435 436# XXX Conflict: # of devices vs network protocol (Native ATM). 437# This makes "atm.h" unusable. 438NATM opt_natm.h 439 440# DPT driver debug flags 441DPT_MEASURE_PERFORMANCE opt_dpt.h 442DPT_HANDLE_TIMEOUTS opt_dpt.h 443DPT_TIMEOUT_FACTOR opt_dpt.h 444DPT_LOST_IRQ opt_dpt.h 445DPT_RESET_HBA opt_dpt.h 446 447# Misc debug flags. Most of these should probably be replaced with 448# 'DEBUG', and then let people recompile just the interesting modules 449# with 'make CC="cc -DDEBUG"'. 450CLUSTERDEBUG opt_debug_cluster.h 451DEBUG_1284 opt_ppb_1284.h 452VP0_DEBUG opt_vpo.h 453LPT_DEBUG opt_lpt.h 454PLIP_DEBUG opt_plip.h 455LOCKF_DEBUG opt_debug_lockf.h 456LOUTB opt_debug_outb.h 457NPX_DEBUG opt_debug_npx.h 458NETATALKDEBUG opt_atalk.h 459SI_DEBUG opt_debug_si.h 460 461# Fb options 462FB_DEBUG opt_fb.h 463FB_INSTALL_CDEV opt_fb.h 464 465# ppbus related options 466PERIPH_1284 opt_ppb_1284.h 467DONTPROBE_1284 opt_ppb_1284.h 468 469# smbus related options 470ENABLE_ALART opt_intpm.h 471 472# These cause changes all over the kernel 473BLKDEV_IOSIZE opt_global.h 474DEBUG opt_global.h 475DEBUG_LOCKS opt_global.h 476DEBUG_CRIT_SECTIONS opt_global.h 477DIAGNOSTIC opt_global.h 478INVARIANTS opt_global.h 479SIMPLELOCK_DEBUG opt_global.h 480VFS_BIO_DEBUG opt_global.h 481DEBUG_INTERRUPTS opt_global.h 482SOCKBUF_DEBUG opt_global.h 483PANIC_DEBUG opt_global.h 484MBUF_DEBUG opt_global.h 485 486# Sample system/interrupt PC 487DEBUG_PCTRACK opt_pctrack.h 488 489# These are VM related options 490NO_SWAPPING opt_vm.h 491PQ_CACHESIZE opt_vmpage.h 492 493# Standard SMP options 494SMP opt_global.h 495 496# sys/netkey 497KEY 498 499# Size of the kernel message buffer 500MSGBUF_SIZE opt_msgbuf.h 501 502# PCI related options 503COMPAT_OLDPCI 504 505# NFS options 506NFS_MINATTRTIMO opt_nfs.h 507NFS_MAXATTRTIMO opt_nfs.h 508NFS_MINDIRATTRTIMO opt_nfs.h 509NFS_MAXDIRATTRTIMO opt_nfs.h 510NFS_GATHERDELAY opt_nfs.h 511NFS_UIDHASHSIZ opt_nfs.h 512NFS_WDELAYHASHSIZ opt_nfs.h 513NFS_MUIDHASHSIZ opt_nfs.h 514NFS_NOSERVER opt_nfs.h 515NFS_DEBUG opt_nfs.h 516 517# MSDOSFS options 518MSDOSFS_DEBUG opt_msdosfs.h 519 520# For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver 521BROOKTREE_SYSTEM_DEFAULT opt_bktr.h 522BROOKTREE_ALLOC_PAGES opt_bktr.h 523BKTR_OVERRIDE_CARD opt_bktr.h 524BKTR_OVERRIDE_TUNER opt_bktr.h 525BKTR_OVERRIDE_DBX opt_bktr.h 526BKTR_OVERRIDE_MSP opt_bktr.h 527BKTR_SYSTEM_DEFAULT opt_bktr.h 528BKTR_ALLOC_PAGES opt_bktr.h 529BKTR_USE_PLL opt_bktr.h 530BKTR_GPIO_ACCESS opt_bktr.h 531BKTR_NO_MSP_RESET opt_bktr.h 532BKTR_430_FX_MODE opt_bktr.h 533BKTR_SIS_VIA_MODE opt_bktr.h 534BKTR_NEW_MSP34XX_DRIVER opt_bktr.h 535 536# meteor opt_meteor.h 537METEOR_ALLOC_PAGES opt_meteor.h 538METEOR_TEST_VIDEO opt_meteor.h 539METEOR_SYSTEM_DEFAULT opt_meteor.h 540METEOR_DEALLOC_PAGES opt_meteor.h 541METEOR_DEALLOC_ABOVE opt_meteor.h 542 543# Various mi ISA bus flags 544COMPAT_OLDISA opt_compat_oldisa.h 545COM_ESP opt_sio.h 546COM_MULTIPORT opt_sio.h 547BREAK_TO_DEBUGGER opt_comconsole.h 548ALT_BREAK_TO_DEBUGGER opt_comconsole.h 549 550# options for bus/device framework 551BUS_DEBUG opt_bus.h 552 553# options for USB support 554OHCI_DEBUG opt_usb.h 555USB_DEBUG opt_usb.h 556 557# Vinum options 558VINUMDEBUG opt_vinum.h 559 560# Embedded system options 561UKBD_DFLT_KEYMAP opt_ukbd.h 562INIT_PATH opt_init_path.h 563 564ROOTDEVNAME opt_rootdevname.h 565 566FDC_DEBUG opt_fdc.h 567PCFCLOCK_VERBOSE opt_pcfclock.h 568PCFCLOCK_MAX_RETRIES opt_pcfclock.h 569 570# Polling device handling 571DEVICE_POLLING opt_polling.h 572 573# Network device queue based polling 574IFPOLL_ENABLE opt_ifpoll.h 575 576# options for ubsec driver 577UBSEC_DEBUG opt_ubsec.h 578UBSEC_RNDTEST opt_ubsec.h 579UBSEC_NO_RNG opt_ubsec.h 580 581# options for hifn driver 582HIFN_DEBUG opt_hifn.h 583HIFN_RNDTEST opt_hifn.h 584HIFN_NO_RNG opt_hifn.h 585 586# KTR options 587KTR opt_global.h 588KTR_ALL opt_ktr.h 589KTR_TOKENS opt_ktr.h 590KTR_MEMORY opt_ktr.h 591KTR_USB_MEMORY opt_ktr.h 592KTR_IPIQ opt_ktr.h 593KTR_MSGPORT opt_ktr.h 594KTR_ENTRIES opt_global.h 595KTR_VERBOSE opt_ktr.h 596KTR_GIANT_CONTENTION opt_ktr.h 597KTR_SPIN_CONTENTION opt_ktr.h 598KTR_IF_BGE opt_ktr.h 599KTR_IF_EM opt_ktr.h 600KTR_IF_EMX opt_ktr.h 601KTR_KERNENTRY opt_ktr.h 602KTR_TESTLOG opt_ktr.h 603KTR_SERIALIZER opt_ktr.h 604KTR_POLLING opt_ktr.h 605KTR_IFQ opt_ktr.h 606KTR_IF_START opt_ktr.h 607KTR_HAMMER opt_ktr.h 608KTR_ETHERNET opt_ktr.h 609KTR_CTXSW opt_ktr.h 610 611# options for the Atheros driver 612ATH_DEBUG opt_ath.h 613ATH_DIAGAPI opt_ath.h 614ATH_RXBUF opt_ath.h 615ATH_TXBUF opt_ath.h 616 617# ...and its HAL 618AH_SUPPORT_AR5416 opt_ah.h 619 620# bce driver 621BCE_DEBUG opt_bce.h 622BCE_NVRAM_WRITE_SUPPORT opt_bce.h 623 624# ed driver 625ED_NO_MIIBUS opt_ed.h 626 627# emx driver 628EMX_RSS_DEBUG opt_emx.h 629 630# jme driver 631JME_RSS_DEBUG opt_jme.h 632 633# dcons options 634DCONS_BUF_SIZE opt_dcons.h 635DCONS_POLL_HZ opt_dcons.h 636DCONS_FORCE_CONSOLE opt_dcons.h 637DCONS_FORCE_GDB opt_dcons.h 638 639# deprecated drivers and options 640I_WANT_DEPRECATED_STUFF opt_deprecated.h 641 642# SCTP 643SCTP opt_sctp.h 644SCTP_DEBUG opt_sctp.h 645SCTP_USE_ADLER32 opt_sctp.h 646SCTP_HIGH_SPEED opt_sctp.h 647SCTP_STAT_LOGGING opt_sctp.h 648SCTP_CWND_LOGGING opt_sctp.h 649SCTP_BLK_LOGGING opt_sctp.h 650SCTP_STR_LOGGING opt_sctp.h 651SCTP_FR_LOGGING opt_sctp.h 652SCTP_MAP_LOGGING opt_sctp.h 653 654# syslink kernel support 655# 656SYSLINK opt_syslink.h 657 658# DSCHED stuff 659DSCHED_FQ opt_dsched.h 660 661# Receive Side Scaling (now basecode) 662RSS_DEBUG opt_rss.h 663 664# Enable watchdogs 665WATCHDOG_ENABLE opt_cpu.h 666 667# Panic settings 668WDOG_DISABLE_ON_PANIC opt_panic.h 669ERROR_LED_ON_PANIC opt_panic.h 670 671# 802.11 support layer 672IEEE80211_DEBUG opt_wlan.h 673IEEE80211_DEBUG_REFCNT opt_wlan.h 674IEEE80211_AMPDU_AGE opt_wlan.h 675IEEE80211_SUPPORT_MESH opt_wlan.h 676IEEE80211_SUPPORT_SUPERG opt_wlan.h 677IEEE80211_SUPPORT_TDMA opt_wlan.h 678 679# 802.11 TDMA support 680TDMA_SLOTLEN_DEFAULT opt_tdma.h 681TDMA_SLOTCNT_DEFAULT opt_tdma.h 682TDMA_BINTVAL_DEFAULT opt_tdma.h 683TDMA_TXRATE_11B_DEFAULT opt_tdma.h 684TDMA_TXRATE_11G_DEFAULT opt_tdma.h 685TDMA_TXRATE_11A_DEFAULT opt_tdma.h 686TDMA_TXRATE_TURBO_DEFAULT opt_tdma.h 687TDMA_TXRATE_HALF_DEFAULT opt_tdma.h 688TDMA_TXRATE_QUARTER_DEFAULT opt_tdma.h 689TDMA_TXRATE_11NA_DEFAULT opt_tdma.h 690TDMA_TXRATE_11NG_DEFAULT opt_tdma.h 691 692PANIC_REBOOT_WAIT_TIME opt_panic.h 693