1# $FreeBSD: src/sys/conf/options,v 1.191.2.53 2003/06/04 17:56:58 sam Exp $ 2# 3# On the handling of kernel options 4# 5# All kernel options should be listed in LINT64, with suitable 6# descriptions. Negative options (options that make some code not 7# compile) should be commented out; LINT64 should compile as much code 8# as possible. Try to structure option-using code so that a single 9# option only switch code on, or only switch code off, to make it 10# possible to have a full compile-test. If necessary, you can include 11# "opt_lint.h" and check for COMPILING_LINT64 to get maximum code 12# coverage. 13# 14# All new options shall also be listed in either "conf/options" or 15# "platform/<platform>/conf/options". Options that affect a single 16# source-file <xxx>.[c|s] should be directed into "opt_<xxx>.h", while 17# options that affect multiple files should either go in 18# "opt_global.h" if this is a kernel-wide option (used just about 19# everywhere), or in "opt_<option-name-in-lower-case>.h" if it affect 20# only some files. Note that the effect of listing only an option 21# without a header-file-name in conf/options (and cousins) is that the 22# last convention is followed. 23# 24# This handling scheme is not yet fully implemented. 25# 26# 27# Format of this file: 28# Option name filename 29# 30# If filename is missing, the default is 31# opt_<name-of-option-in-lower-case>.h 32 33# Adaptec Array Controller driver options 34AAC_DEBUG opt_aac.h 35 36ADW_ALLOW_MEMIO opt_adw.h # Allow PCI devices to use memory 37 # mapped I/O 38AMR_DEBUG opt_amr.h 39TWA_DEBUG opt_twa.h 40 41#options for ACPI support 42ACPI_DEBUG opt_acpi.h 43ACPI_NO_SEMAPHORES opt_acpi.h 44ACPI_ENABLE_PCI opt_acpi.h 45 46# Miscellaneous options. 47COMPILING_LINT opt_lint.h 48DDB 49DDB_TRACE 50DDB_UNATTENDED opt_ddb.h 51GDB_REMOTE_CHAT opt_ddb.h 52KTRACE 53LIBICONV 54MD_NSECT opt_md.h 55MD_ROOT opt_md.h 56MD_ROOT_SIZE opt_md.h 57MFI_DEBUG opt_mfi.h 58NSWAPDEV opt_swap.h 59NSWBUF_MIN opt_swap.h 60PPS_SYNC opt_ntp.h 61QUOTA 62SUIDDIR opt_suiddir.h 63SHMMIN opt_sysvipc.h 64SHMMNI opt_sysvipc.h 65SHMSEG opt_sysvipc.h 66SEMMAP opt_sysvipc.h 67SEMMNI opt_sysvipc.h 68SEMMNS opt_sysvipc.h 69SEMMNU opt_sysvipc.h 70SEMMSL opt_sysvipc.h 71SEMOPM opt_sysvipc.h 72SEMUME opt_sysvipc.h 73MSGMNB opt_sysvipc.h 74MSGMNI opt_sysvipc.h 75MSGSEG opt_sysvipc.h 76MSGSSZ opt_sysvipc.h 77MSGTQL opt_sysvipc.h 78UCONSOLE 79ICMP_BANDLIM 80SHOW_BUSYBUFS 81 82# POSIX kernel options 83_KPOSIX_PRIORITY_SCHEDULING opt_posix.h 84 85# Do we want the config file compiled into the kernel? 86INCLUDE_CONFIG_FILE opt_config.h 87 88# Options for static file systems. These should only be used at config 89# time, since the corresponding lkms cannot work if there are any static 90# dependencies. Unusability is enforced by hiding the defines for the 91# options in a never-included header. 92EXT2FS opt_dontuse.h 93HAMMER opt_dontuse.h 94HAMMER2 opt_dontuse.h 95HPFS opt_dontuse.h 96MFS opt_dontuse.h 97MSDOSFS opt_dontuse.h 98NTFS opt_dontuse.h 99NULLFS opt_dontuse.h 100PROCFS opt_dontuse.h 101PUFFS opt_dontuse.h 102SMBFS opt_dontuse.h 103TMPFS opt_dontuse.h 104UDF opt_dontuse.h 105AUTOFS opt_dontuse.h 106 107# These static filesystems has one slightly bogus static dependency in 108# sys/platform/.../i386/autoconf.c. If any of these filesystems are 109# statically compiled into the kernel, code for mounting them as root 110# filesystems will be enabled - but look below. Boot-code is purposely 111# unavailable for the LKM-based versions. 112CD9660 113FFS 114NFS 115 116# filesystems and libiconv bridge 117CD9660_ICONV opt_dontuse.h 118MSDOSFS_ICONV opt_dontuse.h 119NTFS_ICONV opt_dontuse.h 120 121# SMB/CIFS requester 122NETSMB opt_netsmb.h 123 124# If you are following the conditions in the copyright, 125# you can enable soft-updates which will speed up a lot of things 126# and make the system safer from crashes at the same time. 127# otherwise a STUB module will be compiled in. 128SOFTUPDATES opt_ffs.h 129 130# Enable fast hash lookups for large directories on UFS-based filesystems. 131UFS_DIRHASH opt_ufs.h 132 133# The above static dependencies are planned removed, with a 134# <filesystem>_ROOT option to control if it usable as root. This list 135# allows these options to be present in config files already (though 136# they won't make any difference yet). 137NFS_ROOT opt_nfsroot.h 138 139# Options used only in subr_param.c. 140HZ opt_param.h 141MAXFILES opt_param.h 142NBUF opt_param.h 143NMBCLUSTERS opt_param.h 144NMBUFS opt_param.h 145VM_BCACHE_SIZE_MAX opt_param.h 146VM_SWZONE_SIZE_MAX opt_param.h 147MAXUSERS 148DFLDSIZ opt_param.h 149MAXDSIZ opt_param.h 150MAXSSIZ opt_param.h 151 152# Generic SCSI options. 153CAM_MAX_HIGHPOWER opt_cam.h 154CAMDEBUG opt_cam.h 155CAM_DEBUG_DELAY opt_cam.h 156CAM_DEBUG_BUS opt_cam.h 157CAM_DEBUG_TARGET opt_cam.h 158CAM_DEBUG_LUN opt_cam.h 159CAM_DEBUG_FLAGS opt_cam.h 160SCSI_DELAY opt_scsi.h 161SCSI_NO_SENSE_STRINGS opt_scsi.h 162SCSI_NO_OP_STRINGS opt_scsi.h 163 164# iSCSI options 165ISCSI_INITIATOR_DEBUG opt_iscsi_initiator.h 166 167# Options used only in cam/scsi/scsi_cd.c 168CHANGER_MIN_BUSY_SECONDS opt_cd.h 169CHANGER_MAX_BUSY_SECONDS opt_cd.h 170 171# Options used only in cam/scsi/scsi_sa.c. 172SA_IO_TIMEOUT opt_sa.h 173SA_SPACE_TIMEOUT opt_sa.h 174SA_REWIND_TIMEOUT opt_sa.h 175SA_ERASE_TIMEOUT opt_sa.h 176SA_1FM_AT_EOD opt_sa.h 177 178# Options used only in cam/scsi/scsi_pt.c 179SCSI_PT_DEFAULT_TIMEOUT opt_pt.h 180 181# Options used only in cam/scsi/scsi_ses.c 182SES_ENABLE_PASSTHROUGH opt_ses.h 183 184# Options used in dev/sym/ (Symbios SCSI driver). 185SYM_SETUP_LP_PROBE_MAP opt_sym.h #-Low Priority Probe Map (bits) 186 # Allows the ncr to take precedence 187 # 1 (1<<0) -> 810a, 860 188 # 2 (1<<1) -> 825a, 875, 885, 895 189 # 4 (1<<2) -> 895a, 896, 1510d 190SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885 191 # disabled:0 (default), enabled:1 192SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking 193 # disabled:0, enabled:1 (default) 194SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported 195 # default:8, range:[1..64] 196 197# Options used only in pci/ncr.c 198SCSI_NCR_DEBUG opt_ncr.h 199SCSI_NCR_MAX_SYNC opt_ncr.h 200SCSI_NCR_MAX_WIDE opt_ncr.h 201SCSI_NCR_MYADDR opt_ncr.h 202 203# Options used only in pci/isp_pci.c 204ISP_TARGET_MODE opt_isp.h 205 206# Options used in the 'nata' ATA/ATAPI driver 207ATA_STATIC_ID opt_ata.h 208 209# Net stuff. 210# altq stuff 211ALTQ opt_global.h 212ALTQ_CBQ opt_altq.h 213ALTQ_RED opt_altq.h 214ALTQ_RIO opt_altq.h 215ALTQ_HFSC opt_altq.h 216ALTQ_PRIQ opt_altq.h 217ALTQ_FAIRQ opt_altq.h 218ALTQ_NOPCC opt_altq.h 219ALTQ_DEBUG opt_altq.h 220 221ACCEPT_FILTER_DATA 222ACCEPT_FILTER_HTTP 223BOOTP opt_bootp.h 224BOOTP_COMPAT opt_bootp.h 225BOOTP_NFSROOT opt_bootp.h 226BOOTP_WIRED_TO opt_bootp.h 227CARP opt_carp.h 228MROUTING opt_mrouting.h 229PIM opt_mrouting.h 230INET opt_inet.h 231INET6 opt_inet6.h 232IPSEC opt_ipsec.h 233IPSEC_ESP opt_ipsec.h 234IPSEC_DEBUG opt_ipsec.h 235IPSEC_FILTERGIF opt_ipsec.h 236FAST_IPSEC opt_ipsec.h 237IPDIVERT 238DUMMYNET opt_ipdn.h 239DUMMYNET_DEBUG opt_ipdn.h 240IPFIREWALL opt_ipfw.h 241IPFIREWALL3 opt_ipfw.h 242IPFIREWALL_DEBUG opt_ipfw.h 243IPFIREWALL_VERBOSE opt_ipfw.h 244IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h 245IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h 246IPV6FIREWALL opt_ip6fw.h 247IPV6FIREWALL_VERBOSE opt_ip6fw.h 248IPV6FIREWALL_VERBOSE_LIMIT opt_ip6fw.h 249IPV6FIREWALL_DEFAULT_TO_ACCEPT opt_ip6fw.h 250IPSTEALTH 251LIBMCHAIN 252MPLS opt_mpls.h 253TCPDEBUG 254TCP_SIGNATURE opt_inet.h 255TCP_DROP_SYNFIN opt_tcp_input.h 256ICMPPRINTFS 257 258XBONEHACK 259MBUF_STRESS_TEST opt_mbuf_stress_test.h 260 261# (New netgraph, port still in progress) 262# 263# Netgraph(4). Use option NETGRAPH7 to enable the base netgraph code. 264# Each netgraph node type can be either be compiled into the kernel 265# or loaded dynamically. To get the former, include the corresponding 266# option below. Each type has its own man page, e.g. ng_async(4). 267NETGRAPH7 268NETGRAPH7_DEBUG opt_netgraph.h 269NETGRAPH7_ASYNC opt_netgraph.h 270NETGRAPH7_ATMLLC opt_netgraph.h 271NETGRAPH7_ATM_ATMPIF opt_netgraph.h 272NETGRAPH7_BLUETOOTH opt_netgraph.h 273NETGRAPH7_BLUETOOTH_BT3C opt_netgraph.h 274NETGRAPH7_BLUETOOTH_H4 opt_netgraph.h 275NETGRAPH7_BLUETOOTH_HCI opt_netgraph.h 276NETGRAPH7_BLUETOOTH_L2CAP opt_netgraph.h 277NETGRAPH7_BLUETOOTH_SOCKET opt_netgraph.h 278NETGRAPH7_BLUETOOTH_UBT opt_netgraph.h 279NETGRAPH7_BLUETOOTH_UBTBCMFW opt_netgraph.h 280NETGRAPH7_BPF opt_netgraph.h 281NETGRAPH7_BRIDGE opt_netgraph.h 282NETGRAPH7_CAR opt_netgraph.h 283NETGRAPH7_CISCO opt_netgraph.h 284NETGRAPH7_DEFLATE opt_netgraph.h 285NETGRAPH7_DEVICE opt_netgraph.h 286NETGRAPH7_ECHO opt_netgraph.h 287NETGRAPH7_EIFACE opt_netgraph.h 288NETGRAPH7_ETF opt_netgraph.h 289NETGRAPH7_ETHER opt_netgraph.h 290NETGRAPH7_FEC opt_netgraph.h 291NETGRAPH7_FRAME_RELAY opt_netgraph.h 292NETGRAPH7_GIF opt_netgraph.h 293NETGRAPH7_GIF_DEMUX opt_netgraph.h 294NETGRAPH7_HOLE opt_netgraph.h 295NETGRAPH7_HUB opt_netgraph.h 296NETGRAPH7_IFACE opt_netgraph.h 297NETGRAPH7_IP_INPUT opt_netgraph.h 298NETGRAPH7_IPFW opt_netgraph.h 299NETGRAPH7_KSOCKET opt_netgraph.h 300NETGRAPH7_L2TP opt_netgraph.h 301NETGRAPH7_LMI opt_netgraph.h 302# MPPC compression requires proprietary files (not included) 303NETGRAPH7_MPPC_COMPRESSION opt_netgraph.h 304NETGRAPH7_MPPC_ENCRYPTION opt_netgraph.h 305NETGRAPH7_NAT opt_netgraph.h 306NETGRAPH7_NETFLOW opt_netgraph.h 307NETGRAPH7_ONE2MANY opt_netgraph.h 308NETGRAPH7_PPP opt_netgraph.h 309NETGRAPH7_PPPOE opt_netgraph.h 310NETGRAPH7_PPTPGRE opt_netgraph.h 311NETGRAPH7_PRED1 opt_netgraph.h 312NETGRAPH7_RFC1490 opt_netgraph.h 313NETGRAPH7_SOCKET opt_netgraph.h 314NETGRAPH7_SPLIT opt_netgraph.h 315NETGRAPH7_SPPP opt_netgraph.h 316NETGRAPH7_TAG opt_netgraph.h 317NETGRAPH7_TCPMSS opt_netgraph.h 318NETGRAPH7_TEE opt_netgraph.h 319NETGRAPH7_TTY opt_netgraph.h 320NETGRAPH7_UI opt_netgraph.h 321NETGRAPH7_VJC opt_netgraph.h 322 323# NgATM options 324NGATM7_ATM opt_netgraph.h 325NGATM7_ATMBASE opt_netgraph.h 326NGATM7_SSCOP opt_netgraph.h 327NGATM7_SSCFU opt_netgraph.h 328NGATM7_UNI opt_netgraph.h 329NGATM7_CCATM opt_netgraph.h 330 331# Netgraph(4). Use option NETGRAPH to enable the base netgraph code. 332# Each netgraph node type can be either be compiled into the kernel 333# or loaded dynamically. To get the former, include the corresponding 334# option below. Each type has its own man page, e.g. ng_async(8). 335NETGRAPH 336NETGRAPH_ASYNC opt_netgraph.h 337NETGRAPH_BPF opt_netgraph.h 338NETGRAPH_BRIDGE opt_netgraph.h 339NETGRAPH_CISCO opt_netgraph.h 340NETGRAPH_ECHO opt_netgraph.h 341NETGRAPH_EIFACE opt_netgraph.h 342NETGRAPH_ETHER opt_netgraph.h 343NETGRAPH_FEC opt_netgraph.h 344NETGRAPH_FRAME_RELAY opt_netgraph.h 345NETGRAPH_HOLE opt_netgraph.h 346NETGRAPH_IFACE opt_netgraph.h 347NETGRAPH_KSOCKET opt_netgraph.h 348NETGRAPH_LMI opt_netgraph.h 349NETGRAPH_L2TP opt_netgraph.h 350# MPPC compression requires proprietary files (not included) 351NETGRAPH_MPPC_COMPRESSION opt_netgraph.h 352NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h 353NETGRAPH_ONE2MANY opt_netgraph.h 354NETGRAPH_PPP opt_netgraph.h 355NETGRAPH_PPPOE opt_netgraph.h 356NETGRAPH_PPTPGRE opt_netgraph.h 357NETGRAPH_RFC1490 opt_netgraph.h 358NETGRAPH_SOCKET opt_netgraph.h 359NETGRAPH_TEE opt_netgraph.h 360NETGRAPH_TTY opt_netgraph.h 361NETGRAPH_UI opt_netgraph.h 362NETGRAPH_VJC opt_netgraph.h 363 364# AGP options 365AGP_DEBUG opt_agp.h 366 367# DRM options 368DRM_DEBUG opt_drm.h 369VGA_SWITCHEROO opt_drm.h 370 371# DPT driver debug flags 372DPT_MEASURE_PERFORMANCE opt_dpt.h 373DPT_HANDLE_TIMEOUTS opt_dpt.h 374DPT_TIMEOUT_FACTOR opt_dpt.h 375DPT_LOST_IRQ opt_dpt.h 376DPT_RESET_HBA opt_dpt.h 377 378# Misc debug flags. Most of these should probably be replaced with 379# 'DEBUG', and then let people recompile just the interesting modules 380# with 'make CC="cc -DDEBUG"'. 381CLUSTERDEBUG opt_debug_cluster.h 382DEBUG_1284 opt_ppb_1284.h 383VP0_DEBUG opt_vpo.h 384LPT_DEBUG opt_lpt.h 385PLIP_DEBUG opt_plip.h 386LOCKF_DEBUG opt_debug_lockf.h 387SI_DEBUG opt_debug_si.h 388 389# Fb options 390FB_DEBUG opt_fb.h 391FB_INSTALL_CDEV opt_fb.h 392 393# ppbus related options 394PERIPH_1284 opt_ppb_1284.h 395DONTPROBE_1284 opt_ppb_1284.h 396 397# smbus related options 398ENABLE_ALART opt_intpm.h 399 400# These cause changes all over the kernel 401NO_LWKT_SPLIT_USERPRI opt_global.h 402BLKDEV_IOSIZE opt_global.h 403DEBUG opt_global.h 404DEBUG_LOCKS opt_global.h 405DEBUG_LOCKS_LATENCY opt_global.h 406DEBUG_CRIT_SECTIONS opt_global.h 407DIAGNOSTIC opt_global.h 408INVARIANTS opt_global.h 409VFS_BIO_DEBUG opt_global.h 410SOCKBUF_DEBUG opt_global.h 411PANIC_DEBUG opt_global.h 412MBUF_DEBUG opt_global.h 413PMAP_DEBUG opt_global.h 414VM_PAGE_DEBUG opt_global.h 415SLAB_DEBUG opt_global.h 416 417# Sample system/interrupt PC 418DEBUG_PCTRACK opt_pctrack.h 419 420# These are VM related options 421NO_SWAPPING opt_vm.h 422 423# sys/netkey 424KEY 425 426# Size of the kernel message buffer 427MSGBUF_SIZE opt_msgbuf.h 428 429# NFS options 430NFS_MINATTRTIMO opt_nfs.h 431NFS_MAXATTRTIMO opt_nfs.h 432NFS_MINDIRATTRTIMO opt_nfs.h 433NFS_MAXDIRATTRTIMO opt_nfs.h 434NFS_GATHERDELAY opt_nfs.h 435NFS_UIDHASHSIZ opt_nfs.h 436NFS_WDELAYHASHSIZ opt_nfs.h 437NFS_MUIDHASHSIZ opt_nfs.h 438NFS_NOSERVER opt_nfs.h 439NFS_DEBUG opt_nfs.h 440 441# MSDOSFS options 442MSDOSFS_DEBUG opt_msdosfs.h 443 444# For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver 445BROOKTREE_SYSTEM_DEFAULT opt_bktr.h 446BROOKTREE_ALLOC_PAGES opt_bktr.h 447BKTR_OVERRIDE_CARD opt_bktr.h 448BKTR_OVERRIDE_TUNER opt_bktr.h 449BKTR_OVERRIDE_DBX opt_bktr.h 450BKTR_OVERRIDE_MSP opt_bktr.h 451BKTR_SYSTEM_DEFAULT opt_bktr.h 452BKTR_ALLOC_PAGES opt_bktr.h 453BKTR_USE_PLL opt_bktr.h 454BKTR_GPIO_ACCESS opt_bktr.h 455BKTR_NO_MSP_RESET opt_bktr.h 456BKTR_430_FX_MODE opt_bktr.h 457BKTR_SIS_VIA_MODE opt_bktr.h 458BKTR_NEW_MSP34XX_DRIVER opt_bktr.h 459 460# Various mi ISA bus flags 461COM_ESP opt_sio.h 462COM_MULTIPORT opt_sio.h 463BREAK_TO_DEBUGGER opt_comconsole.h 464ALT_BREAK_TO_DEBUGGER opt_comconsole.h 465 466# options for bus/device framework 467BUS_DEBUG opt_bus.h 468 469# options for USB support 470OHCI_DEBUG opt_usb.h 471USB_DEBUG opt_usb.h 472 473# options for the Realtek RTL8188*U/RTL8192CU driver (urtwn) 474URTWN_WITHOUT_UCODE opt_urtwn.h 475 476# Vinum options 477VINUMDEBUG opt_vinum.h 478 479# Embedded system options 480UKBD_DFLT_KEYMAP opt_ukbd.h 481INIT_PATH opt_init_path.h 482 483ROOTDEVNAME opt_rootdevname.h 484 485FDC_DEBUG opt_fdc.h 486PCFCLOCK_VERBOSE opt_pcfclock.h 487PCFCLOCK_MAX_RETRIES opt_pcfclock.h 488 489# Network device queue based polling 490IFPOLL_ENABLE opt_ifpoll.h 491 492# options for ubsec driver 493UBSEC_DEBUG opt_ubsec.h 494UBSEC_RNDTEST opt_ubsec.h 495UBSEC_NO_RNG opt_ubsec.h 496 497# options for hifn driver 498HIFN_DEBUG opt_hifn.h 499HIFN_RNDTEST opt_hifn.h 500HIFN_NO_RNG opt_hifn.h 501 502# options for safenet driver 503SAFE_DEBUG opt_safe.h 504SAFE_NO_RNG opt_safe.h 505SAFE_RNDTEST opt_safe.h 506 507# KTR options 508KTR opt_global.h 509KTR_ENTRIES opt_global.h 510KTR_ALL opt_ktr.h 511KTR_ACPI_EC opt_ktr.h 512KTR_CTXSW opt_ktr.h 513KTR_DMCRYPT opt_ktr.h 514KTR_ETHERNET opt_ktr.h 515KTR_HAMMER opt_ktr.h 516KTR_IFQ opt_ktr.h 517KTR_IF_BGE opt_ktr.h 518KTR_IF_EM opt_ktr.h 519KTR_IF_EMX opt_ktr.h 520KTR_IF_START opt_ktr.h 521KTR_IPIQ opt_ktr.h 522KTR_KERNENTRY opt_ktr.h 523KTR_MEMORY opt_ktr.h 524KTR_SERIALIZER opt_ktr.h 525KTR_SPIN_CONTENTION opt_ktr.h 526KTR_TESTLOG opt_ktr.h 527KTR_TOKENS opt_ktr.h 528KTR_TSLEEP opt_ktr.h 529KTR_USCHED_BSD4 opt_ktr.h 530KTR_USCHED_DFLY opt_ktr.h 531KTR_VERBOSE opt_ktr.h 532KTR_IF_POLL opt_ktr.h 533KTR_UDP opt_ktr.h 534KTR_SOWAKEUP opt_ktr.h 535 536# NTFS options 537NTFS_DEBUG opt_ntfs.h 538 539# options for the Atheros driver 540ATH_DEBUG opt_ath.h 541#ATH_DEBUG_ALQ opt_ath.h 542ATH_DIAGAPI opt_ath.h 543#ATH_EEPROM_FIRMWARE opt_ath.h 544#ATH_ENABLE_11N opt_ath.h 545ATH_ENABLE_DFS opt_ath.h 546#ATH_ENABLE_RADIOTAP_VENDOR_EXT opt_ath.h 547ATH_KTR_INTR_DEBUG opt_ath.h 548#ATH_TX99_DIAG opt_ath.h 549 550# ...and its HAL 551AH_AR5416_INTERRUPT_MITIGATION opt_ah.h 552AH_ASSERT opt_ah.h 553AH_DEBUG opt_ah.h 554#AH_DEBUG_ALQ opt_ah.h 555#AH_DEBUG_COUNTRY opt_ah.h 556AH_INTERRUPT_DEBUGGING opt_ah.h 557AH_MAXCHAN opt_ah.h 558AH_NEED_DESC_SWAP opt_ah.h 559AH_PRIVATE_DIAG opt_ah.h 560AH_RXCFG_SDMAMW_4BYTES opt_ah.h 561AH_SUPPORT_AR5416 opt_ah.h 562AH_SUPPORT_AR9130 opt_ah.h 563AH_SUPPORT_AR9330 opt_ah.h 564AH_SUPPORT_AR9340 opt_ah.h 565AH_USE_INIPDGAIN opt_ah.h 566#AH_WRITE_EEPROM opt_ah.h 567#AH_WRITE_REGDOMAIN opt_ah.h 568 569# bce driver 570BCE_RSS_DEBUG opt_bce.h 571BCE_TSS_DEBUG opt_bce.h 572 573# bnx driver 574BNX_RSS_DEBUG opt_bnx.h 575BNX_TSO_DEBUG opt_bnx.h 576BNX_TSS_DEBUG opt_bnx.h 577 578# bwn driver 579BWN_DEBUG opt_bwn.h 580BWN_RXRING_SLOTS opt_bwn.h 581BWN_TXRING_SLOTS opt_bwn.h 582 583# siba_bwn driver 584SIBA_DEBUG opt_siba.h 585 586# emx driver 587EMX_RSS_DEBUG opt_emx.h 588EMX_TSO_DEBUG opt_emx.h 589EMX_TSS_DEBUG opt_emx.h 590 591# jme driver 592JME_RSS_DEBUG opt_jme.h 593 594# igb driver 595IGB_RSS_DEBUG opt_igb.h 596IGB_TSS_DEBUG opt_igb.h 597IGB_MSIX_DEBUG opt_igb.h 598 599# ix driver 600IX_RSS_DEBUG opt_ix.h 601 602# Options for the Intel 802.11ac wireless driver 603IWM_DEBUG opt_iwm.h 604 605# Options for the Intel 802.11n wireless driver 606IWN_DEBUG opt_iwn.h 607 608# Options for the Intel 3945ABG wireless driver 609WPI_DEBUG opt_wpi.h 610 611# dcons options 612DCONS_BUF_SIZE opt_dcons.h 613DCONS_POLL_HZ opt_dcons.h 614DCONS_FORCE_CONSOLE opt_dcons.h 615DCONS_FORCE_GDB opt_dcons.h 616 617# deprecated drivers and options 618I_WANT_DEPRECATED_STUFF opt_deprecated.h 619 620# Receive Side Scaling (now basecode) 621RSS_DEBUG opt_rss.h 622 623# Panic settings 624WDOG_DISABLE_ON_PANIC opt_panic.h 625ERROR_LED_ON_PANIC opt_panic.h 626 627# 802.11 support layer 628IEEE80211_DEBUG opt_wlan.h 629IEEE80211_DEBUG_REFCNT opt_wlan.h 630IEEE80211_SUPPORT_MESH opt_wlan.h 631IEEE80211_SUPPORT_SUPERG opt_wlan.h 632IEEE80211_SUPPORT_TDMA opt_wlan.h 633 634# 802.11 TDMA support 635TDMA_SLOTLEN_DEFAULT opt_tdma.h 636TDMA_SLOTCNT_DEFAULT opt_tdma.h 637TDMA_BINTVAL_DEFAULT opt_tdma.h 638TDMA_TXRATE_11B_DEFAULT opt_tdma.h 639TDMA_TXRATE_11G_DEFAULT opt_tdma.h 640TDMA_TXRATE_11A_DEFAULT opt_tdma.h 641TDMA_TXRATE_TURBO_DEFAULT opt_tdma.h 642TDMA_TXRATE_HALF_DEFAULT opt_tdma.h 643TDMA_TXRATE_QUARTER_DEFAULT opt_tdma.h 644TDMA_TXRATE_11NA_DEFAULT opt_tdma.h 645TDMA_TXRATE_11NG_DEFAULT opt_tdma.h 646 647# Sound options 648SND_DEBUG opt_snd.h 649SND_DIAGNOSTIC opt_snd.h 650SND_FEEDER_MULTIFORMAT opt_snd.h 651SND_FEEDER_FULL_MULTIFORMAT opt_snd.h 652SND_FEEDER_RATE_HP opt_snd.h 653SND_PCM_64 opt_snd.h 654SND_OLDSTEREO opt_snd.h 655 656PANIC_REBOOT_WAIT_TIME opt_panic.h 657 658# Obsolete options (will be removed in the future) 659# 660SYSVMSG opt_dontuse.h 661SYSVSEM opt_dontuse.h 662SYSVSHM opt_dontuse.h 663P1003_1B opt_dontuse.h 664_KPOSIX_VERSION opt_dontuse.h 665DSCHED_FQ opt_dontuse.h 666FFS_ROOT opt_dontuse.h 667