1# $FreeBSD: src/sys/conf/options,v 1.191.2.53 2003/06/04 17:56:58 sam Exp $ 2# 3# On the handling of kernel options 4# 5# All kernel options should be listed in LINT, with suitable 6# descriptions. Negative options (options that make some code not 7# compile) should be commented out; LINT should compile as much code 8# as possible. Try to structure option-using code so that a single 9# option only switch code on, or only switch code off, to make it 10# possible to have a full compile-test. If necessary, you can include 11# "opt_lint.h" and check for COMPILING_LINT to get maximum code 12# coverage. 13# 14# All new options shall also be listed in either "conf/options" or 15# "platform/<platform>/conf/options". Options that affect a single 16# source-file <xxx>.[c|s] should be directed into "opt_<xxx>.h", while 17# options that affect multiple files should either go in 18# "opt_global.h" if this is a kernel-wide option (used just about 19# everywhere), or in "opt_<option-name-in-lower-case>.h" if it affect 20# only some files. Note that the effect of listing only an option 21# without a header-file-name in conf/options (and cousins) is that the 22# last convention is followed. 23# 24# This handling scheme is not yet fully implemented. 25# 26# 27# Format of this file: 28# Option name filename 29# 30# If filename is missing, the default is 31# opt_<name-of-option-in-lower-case>.h 32 33# Adaptec Array Controller driver options 34AAC_DEBUG opt_aac.h 35 36# Adaptec aic7xxx SCSI controller options 37AHC_ALLOW_MEMIO opt_aic7xxx.h # Allow PCI devices to use memory 38 # mapped I/O 39 40AHC_TMODE_ENABLE opt_aic7xxx.h # Bitmap of units to enable 41 # targetmode operations. 42 43AHC_DUMP_EEPROM opt_aic7xxx.h # Dump the contents of our 44 # configuration prom. 45 46AHC_DEBUG opt_aic7xxx.h # Compile in Aic7xxx Debugging code. 47 48AHC_DEBUG_OPTS opt_aic7xxx.h # Aic7xxx driver debugging options. 49 # See sys/dev/aic7xxx/aic7xxx.h 50 51AHC_REG_PRETTY_PRINT opt_aic7xxx.h # Print register bitfields in debug 52 # output. Adds ~15k to driver. 53 54# Adaptec aic79xx SCSI controller options 55AHD_DEBUG opt_aic79xx.h # Compile in Aic79xx Debugging code. 56 57AHD_DEBUG_OPTS opt_aic79xx.h # Aic79xx driver debugging options. 58 # See sys/dev/aic7xxx/aic79xx.h 59 60AHD_TMODE_ENABLE opt_aic79xx.h # Bitmap of units to enable 61 # targetmode operations. 62 63AHD_REG_PRETTY_PRINT opt_aic79xx.h # Print register bitfields in debug 64 # output. Adds ~15k to driver. 65 66ADW_ALLOW_MEMIO opt_adw.h # Allow PCI devices to use memory 67 # mapped I/O 68TWA_DEBUG opt_twa.h 69 70#options for ACPI support 71ACPI_DEBUG opt_acpi.h 72ACPI_NO_SEMAPHORES opt_acpi.h 73ACPI_ENABLE_PCI opt_acpi.h 74 75# Miscellaneous options. 76COMPAT_DF12 opt_compatdf12.h 77COMPAT_43 opt_compat.h 78COMPAT_SUNOS opt_compat.h 79COMPILING_LINT opt_lint.h 80DDB 81DDB_TRACE 82DDB_UNATTENDED opt_ddb.h 83GDB_REMOTE_CHAT opt_ddb.h 84HW_WDOG 85KTRACE 86LIBICONV 87MD_NSECT opt_md.h 88MD_ROOT opt_md.h 89MD_ROOT_SIZE opt_md.h 90MFI_DEBUG opt_mfi.h 91NSWAPDEV opt_swap.h 92NSWBUF_MIN opt_swap.h 93PPS_SYNC opt_ntp.h 94QUOTA 95SUIDDIR opt_suiddir.h 96SYSVMSG opt_sysvipc.h 97SYSVSEM opt_sysvipc.h 98SYSVSHM opt_sysvipc.h 99SHMALL opt_sysvipc.h 100SHMMAX opt_sysvipc.h 101SHMMAXPGS opt_sysvipc.h 102SHMMIN opt_sysvipc.h 103SHMMNI opt_sysvipc.h 104SHMSEG opt_sysvipc.h 105SEMMAP opt_sysvipc.h 106SEMMNI opt_sysvipc.h 107SEMMNS opt_sysvipc.h 108SEMMNU opt_sysvipc.h 109SEMMSL opt_sysvipc.h 110SEMOPM opt_sysvipc.h 111SEMUME opt_sysvipc.h 112MSGMNB opt_sysvipc.h 113MSGMNI opt_sysvipc.h 114MSGSEG opt_sysvipc.h 115MSGSSZ opt_sysvipc.h 116MSGTQL opt_sysvipc.h 117UCONSOLE 118ICMP_BANDLIM 119SHOW_BUSYBUFS 120DIRECTIO opt_directio.h 121 122# POSIX kernel options 123P1003_1B opt_posix.h 124_KPOSIX_PRIORITY_SCHEDULING opt_posix.h 125_KPOSIX_VERSION opt_posix.h 126 127# Do we want the config file compiled into the kernel? 128INCLUDE_CONFIG_FILE opt_config.h 129 130# Options for static file systems. These should only be used at config 131# time, since the corresponding lkms cannot work if there are any static 132# dependencies. Unusability is enforced by hiding the defines for the 133# options in a never-included header. 134EXT2FS opt_dontuse.h 135FDESC opt_dontuse.h 136HPFS opt_dontuse.h 137MFS opt_dontuse.h 138MSDOSFS opt_dontuse.h 139NULLFS opt_dontuse.h 140PORTAL opt_dontuse.h 141PROCFS opt_dontuse.h 142UDF opt_dontuse.h 143NTFS opt_dontuse.h 144#TMPFS opt_dontuse.h 145 146# These static filesystems has one slightly bogus static dependency in 147# sys/platform/.../i386/autoconf.c. If any of these filesystems are 148# statically compiled into the kernel, code for mounting them as root 149# filesystems will be enabled - but look below. Boot-code is purposely 150# unavailable for the LKM-based versions. 151CD9660 152FFS 153NFS 154NWFS 155USERFS 156TMPFS 157HAMMER 158 159# filesystems and libiconv bridge 160CD9660_ICONV opt_dontuse.h 161MSDOSFS_ICONV opt_dontuse.h 162NTFS_ICONV opt_dontuse.h 163 164# If you are following the conditions in the copyright, 165# you can enable soft-updates which will speed up a lot of things 166# and make the system safer from crashes at the same time. 167# otherwise a STUB module will be compiled in. 168SOFTUPDATES opt_ffs.h 169 170# Enable fast hash lookups for large directories on UFS-based filesystems. 171UFS_DIRHASH opt_ufs.h 172 173# The above static dependencies are planned removed, with a 174# <filesystem>_ROOT option to control if it usable as root. This list 175# allows these options to be present in config files already (though 176# they won't make any difference yet). 177FFS_ROOT opt_ffs.h 178NFS_ROOT opt_nfsroot.h 179 180# The union static file system has bogus static dependencies, so it isn't 181# hidden yet. 182UNION 183 184# Options used only in subr_param.c. 185HZ opt_param.h 186MAXFILES opt_param.h 187NBUF opt_param.h 188NMBCLUSTERS opt_param.h 189NMBUFS opt_param.h 190VM_BCACHE_SIZE_MAX opt_param.h 191VM_SWZONE_SIZE_MAX opt_param.h 192MAXUSERS 193DFLDSIZ opt_param.h 194MAXDSIZ opt_param.h 195MAXSSIZ opt_param.h 196 197# Generic SCSI options. 198CAM_MAX_HIGHPOWER opt_cam.h 199CAMDEBUG opt_cam.h 200CAM_DEBUG_DELAY opt_cam.h 201CAM_DEBUG_BUS opt_cam.h 202CAM_DEBUG_TARGET opt_cam.h 203CAM_DEBUG_LUN opt_cam.h 204CAM_DEBUG_FLAGS opt_cam.h 205SCSI_DELAY opt_scsi.h 206SCSI_NO_SENSE_STRINGS opt_scsi.h 207SCSI_NO_OP_STRINGS opt_scsi.h 208 209# iSCSI options 210ISCSI_INITIATOR_DEBUG opt_iscsi_initiator.h 211 212# Options used only in cam/scsi/scsi_cd.c 213CHANGER_MIN_BUSY_SECONDS opt_cd.h 214CHANGER_MAX_BUSY_SECONDS opt_cd.h 215 216# Options used only in cam/scsi/scsi_sa.c. 217SA_IO_TIMEOUT opt_sa.h 218SA_SPACE_TIMEOUT opt_sa.h 219SA_REWIND_TIMEOUT opt_sa.h 220SA_ERASE_TIMEOUT opt_sa.h 221SA_1FM_AT_EOD opt_sa.h 222 223# Options used only in cam/scsi/scsi_pt.c 224SCSI_PT_DEFAULT_TIMEOUT opt_pt.h 225 226# Options used only in cam/scsi/scsi_ses.c 227SES_ENABLE_PASSTHROUGH opt_ses.h 228 229# Options used in dev/sym/ (Symbios SCSI driver). 230SYM_SETUP_LP_PROBE_MAP opt_sym.h #-Low Priority Probe Map (bits) 231 # Allows the ncr to take precedence 232 # 1 (1<<0) -> 810a, 860 233 # 2 (1<<1) -> 825a, 875, 885, 895 234 # 4 (1<<2) -> 895a, 896, 1510d 235SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885 236 # disabled:0 (default), enabled:1 237SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking 238 # disabled:0, enabled:1 (default) 239SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported 240 # default:8, range:[1..64] 241 242# Options used only in pci/ncr.c 243SCSI_NCR_DEBUG opt_ncr.h 244SCSI_NCR_MAX_SYNC opt_ncr.h 245SCSI_NCR_MAX_WIDE opt_ncr.h 246SCSI_NCR_MYADDR opt_ncr.h 247 248# Options used only in pci/isp_pci.c 249ISP_TARGET_MODE opt_isp.h 250 251# Options used in the 'ata' ATA/ATAPI driver 252ATA_STATIC_ID opt_ata.h 253 254# Net stuff. 255# altq stuff 256ALTQ opt_global.h 257ALTQ_CBQ opt_altq.h 258ALTQ_RED opt_altq.h 259ALTQ_RIO opt_altq.h 260ALTQ_HFSC opt_altq.h 261ALTQ_PRIQ opt_altq.h 262ALTQ_FAIRQ opt_altq.h 263ALTQ_NOPCC opt_altq.h 264ALTQ_DEBUG opt_altq.h 265 266ACCEPT_FILTER_DATA 267ACCEPT_FILTER_HTTP 268BOOTP opt_bootp.h 269BOOTP_COMPAT opt_bootp.h 270BOOTP_NFSROOT opt_bootp.h 271BOOTP_NFSV3 opt_bootp.h 272BOOTP_WIRED_TO opt_bootp.h 273CARP opt_carp.h 274ETHER_II opt_ef.h 275ETHER_8023 opt_ef.h 276ETHER_8022 opt_ef.h 277ETHER_SNAP opt_ef.h 278MROUTING opt_mrouting.h 279PIM opt_mrouting.h 280INET opt_inet.h 281INET6 opt_inet6.h 282IPSEC opt_ipsec.h 283IPSEC_ESP opt_ipsec.h 284IPSEC_DEBUG opt_ipsec.h 285IPSEC_FILTERGIF opt_ipsec.h 286FAST_IPSEC opt_ipsec.h 287IPDIVERT 288DUMMYNET opt_ipdn.h 289DUMMYNET_DEBUG opt_ipdn.h 290IPFILTER opt_ipfilter.h 291IPFILTER_LOG opt_ipfilter.h 292IPFILTER_DEFAULT_BLOCK opt_ipfilter.h 293IPFIREWALL opt_ipfw.h 294IPFIREWALL_DEBUG opt_ipfw.h 295IPFIREWALL_VERBOSE opt_ipfw.h 296IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h 297IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h 298IPFIREWALL_FORWARD opt_ipfw.h 299IPV6FIREWALL opt_ip6fw.h 300IPV6FIREWALL_VERBOSE opt_ip6fw.h 301IPV6FIREWALL_VERBOSE_LIMIT opt_ip6fw.h 302IPV6FIREWALL_DEFAULT_TO_ACCEPT opt_ip6fw.h 303IPSTEALTH 304IPX opt_ipx.h 305IPXIP opt_ipx.h 306IPTUNNEL opt_ipx.h 307LIBMCHAIN 308MPLS opt_mpls.h 309NCP opt_ncp.h 310NETATALK opt_atalk.h 311PPP_BSDCOMP opt_ppp.h 312PPP_DEFLATE opt_ppp.h 313PPP_FILTER opt_ppp.h 314SLIP_IFF_OPTS opt_slip.h 315TCPDEBUG 316TCP_SIGNATURE opt_inet.h 317TCP_DROP_SYNFIN opt_tcp_input.h 318 319XBONEHACK 320MBUF_STRESS_TEST opt_mbuf_stress_test.h 321 322# (New netgraph, port still in progress) 323# 324# Netgraph(4). Use option NETGRAPH7 to enable the base netgraph code. 325# Each netgraph node type can be either be compiled into the kernel 326# or loaded dynamically. To get the former, include the corresponding 327# option below. Each type has its own man page, e.g. ng_async(4). 328NETGRAPH7 329NETGRAPH7_DEBUG opt_netgraph.h 330NETGRAPH7_ASYNC opt_netgraph.h 331NETGRAPH7_ATMLLC opt_netgraph.h 332NETGRAPH7_ATM_ATMPIF opt_netgraph.h 333NETGRAPH7_BLUETOOTH opt_netgraph.h 334NETGRAPH7_BLUETOOTH_BT3C opt_netgraph.h 335NETGRAPH7_BLUETOOTH_H4 opt_netgraph.h 336NETGRAPH7_BLUETOOTH_HCI opt_netgraph.h 337NETGRAPH7_BLUETOOTH_L2CAP opt_netgraph.h 338NETGRAPH7_BLUETOOTH_SOCKET opt_netgraph.h 339NETGRAPH7_BLUETOOTH_UBT opt_netgraph.h 340NETGRAPH7_BLUETOOTH_UBTBCMFW opt_netgraph.h 341NETGRAPH7_BPF opt_netgraph.h 342NETGRAPH7_BRIDGE opt_netgraph.h 343NETGRAPH7_CAR opt_netgraph.h 344NETGRAPH7_CISCO opt_netgraph.h 345NETGRAPH7_DEFLATE opt_netgraph.h 346NETGRAPH7_DEVICE opt_netgraph.h 347NETGRAPH7_ECHO opt_netgraph.h 348NETGRAPH7_EIFACE opt_netgraph.h 349NETGRAPH7_ETHER opt_netgraph.h 350NETGRAPH7_FEC opt_netgraph.h 351NETGRAPH7_FRAME_RELAY opt_netgraph.h 352NETGRAPH7_GIF opt_netgraph.h 353NETGRAPH7_GIF_DEMUX opt_netgraph.h 354NETGRAPH7_HOLE opt_netgraph.h 355NETGRAPH7_IFACE opt_netgraph.h 356NETGRAPH7_IP_INPUT opt_netgraph.h 357NETGRAPH7_IPFW opt_netgraph.h 358NETGRAPH7_KSOCKET opt_netgraph.h 359NETGRAPH7_L2TP opt_netgraph.h 360NETGRAPH7_LMI opt_netgraph.h 361# MPPC compression requires proprietary files (not included) 362NETGRAPH7_MPPC_COMPRESSION opt_netgraph.h 363NETGRAPH7_MPPC_ENCRYPTION opt_netgraph.h 364NETGRAPH7_NAT opt_netgraph.h 365NETGRAPH7_NETFLOW opt_netgraph.h 366NETGRAPH7_ONE2MANY opt_netgraph.h 367NETGRAPH7_PPP opt_netgraph.h 368NETGRAPH7_PPPOE opt_netgraph.h 369NETGRAPH7_PPTPGRE opt_netgraph.h 370NETGRAPH7_PRED1 opt_netgraph.h 371NETGRAPH7_RFC1490 opt_netgraph.h 372NETGRAPH7_SOCKET opt_netgraph.h 373NETGRAPH7_SPLIT opt_netgraph.h 374NETGRAPH7_SPPP opt_netgraph.h 375NETGRAPH7_TAG opt_netgraph.h 376NETGRAPH7_TCPMSS opt_netgraph.h 377NETGRAPH7_TEE opt_netgraph.h 378NETGRAPH7_TTY opt_netgraph.h 379NETGRAPH7_UI opt_netgraph.h 380NETGRAPH7_VJC opt_netgraph.h 381 382# NgATM options 383NGATM7_ATM opt_netgraph.h 384NGATM7_ATMBASE opt_netgraph.h 385NGATM7_SSCOP opt_netgraph.h 386NGATM7_SSCFU opt_netgraph.h 387NGATM7_UNI opt_netgraph.h 388NGATM7_CCATM opt_netgraph.h 389 390# Netgraph(4). Use option NETGRAPH to enable the base netgraph code. 391# Each netgraph node type can be either be compiled into the kernel 392# or loaded dynamically. To get the former, include the corresponding 393# option below. Each type has its own man page, e.g. ng_async(8). 394NETGRAPH 395NETGRAPH_ASYNC opt_netgraph.h 396NETGRAPH_BPF opt_netgraph.h 397NETGRAPH_BRIDGE opt_netgraph.h 398NETGRAPH_CISCO opt_netgraph.h 399NETGRAPH_ECHO opt_netgraph.h 400NETGRAPH_EIFACE opt_netgraph.h 401NETGRAPH_ETHER opt_netgraph.h 402NETGRAPH_FRAME_RELAY opt_netgraph.h 403NETGRAPH_HOLE opt_netgraph.h 404NETGRAPH_IFACE opt_netgraph.h 405NETGRAPH_KSOCKET opt_netgraph.h 406NETGRAPH_LMI opt_netgraph.h 407NETGRAPH_L2TP opt_netgraph.h 408# MPPC compression requires proprietary files (not included) 409NETGRAPH_MPPC_COMPRESSION opt_netgraph.h 410NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h 411NETGRAPH_ONE2MANY opt_netgraph.h 412NETGRAPH_PPP opt_netgraph.h 413NETGRAPH_PPPOE opt_netgraph.h 414NETGRAPH_PPTPGRE opt_netgraph.h 415NETGRAPH_RFC1490 opt_netgraph.h 416NETGRAPH_SOCKET opt_netgraph.h 417NETGRAPH_TEE opt_netgraph.h 418NETGRAPH_TTY opt_netgraph.h 419NETGRAPH_UI opt_netgraph.h 420NETGRAPH_VJC opt_netgraph.h 421 422# DRM options 423DRM_DEBUG opt_drm.h 424DRM_LINUX opt_drm.h 425 426# ATM (HARP version) 427ATM_CORE opt_atm.h 428ATM_IP opt_atm.h 429ATM_SIGPVC opt_atm.h 430ATM_SPANS opt_atm.h 431ATM_UNI opt_atm.h 432 433# XXX Conflict: # of devices vs network protocol (Native ATM). 434# This makes "atm.h" unusable. 435NATM opt_natm.h 436 437# DPT driver debug flags 438DPT_MEASURE_PERFORMANCE opt_dpt.h 439DPT_HANDLE_TIMEOUTS opt_dpt.h 440DPT_TIMEOUT_FACTOR opt_dpt.h 441DPT_LOST_IRQ opt_dpt.h 442DPT_RESET_HBA opt_dpt.h 443 444# Misc debug flags. Most of these should probably be replaced with 445# 'DEBUG', and then let people recompile just the interesting modules 446# with 'make CC="cc -DDEBUG"'. 447CLUSTERDEBUG opt_debug_cluster.h 448DEBUG_1284 opt_ppb_1284.h 449VP0_DEBUG opt_vpo.h 450LPT_DEBUG opt_lpt.h 451PLIP_DEBUG opt_plip.h 452LOCKF_DEBUG opt_debug_lockf.h 453LOUTB opt_debug_outb.h 454NPX_DEBUG opt_debug_npx.h 455NETATALKDEBUG opt_atalk.h 456SI_DEBUG opt_debug_si.h 457 458# Fb options 459FB_DEBUG opt_fb.h 460FB_INSTALL_CDEV opt_fb.h 461 462# ppbus related options 463PERIPH_1284 opt_ppb_1284.h 464DONTPROBE_1284 opt_ppb_1284.h 465 466# smbus related options 467ENABLE_ALART opt_intpm.h 468 469# These cause changes all over the kernel 470BLKDEV_IOSIZE opt_global.h 471DEBUG opt_global.h 472DEBUG_LOCKS opt_global.h 473DEBUG_CRIT_SECTIONS opt_global.h 474DIAGNOSTIC opt_global.h 475INVARIANTS opt_global.h 476VFS_BIO_DEBUG opt_global.h 477DEBUG_INTERRUPTS opt_global.h 478SOCKBUF_DEBUG opt_global.h 479PANIC_DEBUG opt_global.h 480MBUF_DEBUG opt_global.h 481PMAP_DEBUG opt_global.h 482VM_PAGE_DEBUG opt_global.h 483SLAB_DEBUG opt_global.h 484 485# Sample system/interrupt PC 486DEBUG_PCTRACK opt_pctrack.h 487 488# These are VM related options 489NO_SWAPPING opt_vm.h 490PQ_CACHESIZE opt_vmpage.h 491 492# Standard SMP options 493SMP opt_global.h 494 495# sys/netkey 496KEY 497 498# Size of the kernel message buffer 499MSGBUF_SIZE opt_msgbuf.h 500 501# PCI related options 502COMPAT_OLDPCI 503 504# NFS options 505NFS_MINATTRTIMO opt_nfs.h 506NFS_MAXATTRTIMO opt_nfs.h 507NFS_MINDIRATTRTIMO opt_nfs.h 508NFS_MAXDIRATTRTIMO opt_nfs.h 509NFS_GATHERDELAY opt_nfs.h 510NFS_UIDHASHSIZ opt_nfs.h 511NFS_WDELAYHASHSIZ opt_nfs.h 512NFS_MUIDHASHSIZ opt_nfs.h 513NFS_NOSERVER opt_nfs.h 514NFS_DEBUG opt_nfs.h 515 516# MSDOSFS options 517MSDOSFS_DEBUG opt_msdosfs.h 518 519# For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver 520BROOKTREE_SYSTEM_DEFAULT opt_bktr.h 521BROOKTREE_ALLOC_PAGES opt_bktr.h 522BKTR_OVERRIDE_CARD opt_bktr.h 523BKTR_OVERRIDE_TUNER opt_bktr.h 524BKTR_OVERRIDE_DBX opt_bktr.h 525BKTR_OVERRIDE_MSP opt_bktr.h 526BKTR_SYSTEM_DEFAULT opt_bktr.h 527BKTR_ALLOC_PAGES opt_bktr.h 528BKTR_USE_PLL opt_bktr.h 529BKTR_GPIO_ACCESS opt_bktr.h 530BKTR_NO_MSP_RESET opt_bktr.h 531BKTR_430_FX_MODE opt_bktr.h 532BKTR_SIS_VIA_MODE opt_bktr.h 533BKTR_NEW_MSP34XX_DRIVER opt_bktr.h 534 535# Various mi ISA bus flags 536COMPAT_OLDISA opt_compat_oldisa.h 537COM_ESP opt_sio.h 538COM_MULTIPORT opt_sio.h 539BREAK_TO_DEBUGGER opt_comconsole.h 540ALT_BREAK_TO_DEBUGGER opt_comconsole.h 541 542# options for bus/device framework 543BUS_DEBUG opt_bus.h 544 545# options for USB support 546OHCI_DEBUG opt_usb.h 547USB_DEBUG opt_usb.h 548 549# Vinum options 550VINUMDEBUG opt_vinum.h 551 552# Embedded system options 553UKBD_DFLT_KEYMAP opt_ukbd.h 554INIT_PATH opt_init_path.h 555 556ROOTDEVNAME opt_rootdevname.h 557 558FDC_DEBUG opt_fdc.h 559PCFCLOCK_VERBOSE opt_pcfclock.h 560PCFCLOCK_MAX_RETRIES opt_pcfclock.h 561 562# Polling device handling 563DEVICE_POLLING opt_polling.h 564 565# Network device queue based polling 566IFPOLL_ENABLE opt_ifpoll.h 567 568# options for ubsec driver 569UBSEC_DEBUG opt_ubsec.h 570UBSEC_RNDTEST opt_ubsec.h 571UBSEC_NO_RNG opt_ubsec.h 572 573# options for hifn driver 574HIFN_DEBUG opt_hifn.h 575HIFN_RNDTEST opt_hifn.h 576HIFN_NO_RNG opt_hifn.h 577 578# KTR options 579KTR opt_global.h 580KTR_ALL opt_ktr.h 581KTR_TOKENS opt_ktr.h 582KTR_MEMORY opt_ktr.h 583KTR_USB_MEMORY opt_ktr.h 584KTR_IPIQ opt_ktr.h 585KTR_MSGPORT opt_ktr.h 586KTR_ENTRIES opt_global.h 587KTR_VERBOSE opt_ktr.h 588KTR_SPIN_CONTENTION opt_ktr.h 589KTR_IF_BGE opt_ktr.h 590KTR_IF_EM opt_ktr.h 591KTR_IF_EMX opt_ktr.h 592KTR_KERNENTRY opt_ktr.h 593KTR_TESTLOG opt_ktr.h 594KTR_SERIALIZER opt_ktr.h 595KTR_POLLING opt_ktr.h 596KTR_IFQ opt_ktr.h 597KTR_IF_START opt_ktr.h 598KTR_HAMMER opt_ktr.h 599KTR_ETHERNET opt_ktr.h 600KTR_CTXSW opt_ktr.h 601 602# options for the Atheros driver 603ATH_DEBUG opt_ath.h 604ATH_DIAGAPI opt_ath.h 605ATH_RXBUF opt_ath.h 606ATH_TXBUF opt_ath.h 607 608# ...and its HAL 609AH_SUPPORT_AR5416 opt_ah.h 610 611# bce driver 612BCE_DEBUG opt_bce.h 613BCE_NVRAM_WRITE_SUPPORT opt_bce.h 614 615# ed driver 616ED_NO_MIIBUS opt_ed.h 617 618# emx driver 619EMX_RSS_DEBUG opt_emx.h 620 621# jme driver 622JME_RSS_DEBUG opt_jme.h 623 624# dcons options 625DCONS_BUF_SIZE opt_dcons.h 626DCONS_POLL_HZ opt_dcons.h 627DCONS_FORCE_CONSOLE opt_dcons.h 628DCONS_FORCE_GDB opt_dcons.h 629 630# deprecated drivers and options 631I_WANT_DEPRECATED_STUFF opt_deprecated.h 632 633# SCTP 634SCTP opt_sctp.h 635SCTP_DEBUG opt_sctp.h 636SCTP_USE_ADLER32 opt_sctp.h 637SCTP_HIGH_SPEED opt_sctp.h 638SCTP_STAT_LOGGING opt_sctp.h 639SCTP_CWND_LOGGING opt_sctp.h 640SCTP_BLK_LOGGING opt_sctp.h 641SCTP_STR_LOGGING opt_sctp.h 642SCTP_FR_LOGGING opt_sctp.h 643SCTP_MAP_LOGGING opt_sctp.h 644 645# syslink kernel support 646# 647SYSLINK opt_syslink.h 648 649# DSCHED stuff 650DSCHED_FQ opt_dsched.h 651 652# Receive Side Scaling (now basecode) 653RSS_DEBUG opt_rss.h 654 655# Enable watchdogs 656WATCHDOG_ENABLE opt_cpu.h 657 658# Panic settings 659WDOG_DISABLE_ON_PANIC opt_panic.h 660ERROR_LED_ON_PANIC opt_panic.h 661 662# 802.11 support layer 663IEEE80211_DEBUG opt_wlan.h 664IEEE80211_DEBUG_REFCNT opt_wlan.h 665IEEE80211_AMPDU_AGE opt_wlan.h 666IEEE80211_SUPPORT_MESH opt_wlan.h 667IEEE80211_SUPPORT_SUPERG opt_wlan.h 668IEEE80211_SUPPORT_TDMA opt_wlan.h 669 670# 802.11 TDMA support 671TDMA_SLOTLEN_DEFAULT opt_tdma.h 672TDMA_SLOTCNT_DEFAULT opt_tdma.h 673TDMA_BINTVAL_DEFAULT opt_tdma.h 674TDMA_TXRATE_11B_DEFAULT opt_tdma.h 675TDMA_TXRATE_11G_DEFAULT opt_tdma.h 676TDMA_TXRATE_11A_DEFAULT opt_tdma.h 677TDMA_TXRATE_TURBO_DEFAULT opt_tdma.h 678TDMA_TXRATE_HALF_DEFAULT opt_tdma.h 679TDMA_TXRATE_QUARTER_DEFAULT opt_tdma.h 680TDMA_TXRATE_11NA_DEFAULT opt_tdma.h 681TDMA_TXRATE_11NG_DEFAULT opt_tdma.h 682 683PANIC_REBOOT_WAIT_TIME opt_panic.h 684