1# 2# X86_64_GENERIC -- Generic kernel configuration file for DragonFly/x86_64 3# 4# Check the LINT configuration file in sys/config, for an 5# exhaustive list of options. 6 7platform pc64 8machine x86_64 9machine_arch x86_64 10cpu HAMMER_CPU 11ident X86_64_GENERIC 12maxusers 0 13#options CPU_DISABLE_AVX 14 15makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols 16 17options INET #InterNETworking 18options INET6 #IPv6 communications protocols 19options HAMMER #Hammer Filesystem 20options NULLFS #NULL filesystem 21options FFS #Berkeley Fast Filesystem 22options FFS_ROOT #FFS usable as root device [keep this!] 23options SOFTUPDATES #Enable FFS soft updates support 24options UFS_DIRHASH #Improve performance on big directories 25options MFS #Memory Filesystem 26options TMPFS #Temporary Filesystem 27options MD_ROOT #MD is a potential root device 28options NFS #Network Filesystem 29options NFS_ROOT #NFS usable as root device, NFS required 30options MSDOSFS #MSDOS Filesystem 31options CD9660 #ISO 9660 Filesystem 32options PROCFS #Process filesystem 33#options COMPAT_43 #Compatible with BSD 4.3 34options SCSI_DELAY=5000 #Delay (in ms) before probing SCSI 35options IFPOLL_ENABLE # Support mixed interrupt-polling 36 # handling of network device drivers 37options UCONSOLE #Allow users to grab the console 38options KTRACE #ktrace(1) support 39options SYSVSHM #SYSV-style shared memory 40options SYSVMSG #SYSV-style message queues 41options SYSVSEM #SYSV-style semaphores 42options P1003_1B #Posix P1003_1B real-time extensions 43options _KPOSIX_PRIORITY_SCHEDULING 44options ICMP_BANDLIM #Rate limit bad replies 45options KBD_INSTALL_CDEV # install a CDEV entry in /dev 46options AHC_REG_PRETTY_PRINT # Print register bitfields in debug 47 # output. Adds ~128k to driver. 48options AHD_REG_PRETTY_PRINT # Print register bitfields in debug 49 # output. Adds ~215k to driver. 50options DSCHED_FQ # Fair-queuing disk scheduler 51 52# ALTQ 53options ALTQ #alternate queueing 54options ALTQ_CBQ #class based queueing 55options ALTQ_RED #random early detection 56options ALTQ_RIO #triple red for diffserv (needs RED) 57options ALTQ_HFSC #hierarchical fair service curve 58options ALTQ_PRIQ #priority queue 59options ALTQ_FAIRQ #fair queueing 60#options ALTQ_NOPCC #don't use processor cycle counter 61#options ALTQ_DEBUG #for debugging 62 63# Debugging for Development 64options DDB 65options DDB_TRACE 66options INVARIANTS 67 68device isa 69device pci 70 71# AHCI driver, this will override NATA for AHCI devices, 72# both drivers may be included. 73# 74device ahci 75 76# SiI3124/3132 driver 77# 78device sili 79 80# NEW-ATA (NATA) and ATAPI devices 81# 82device nata 83device natadisk # ATA disk drives 84device natapicd # ATAPI CDROM drives 85device natapifd # ATAPI floppy drives 86device natapist # ATAPI tape drives 87device natapicam # Emulate ATAPI devices as SCSI 88device nataraid # support for ATA software RAID 89 # controllers 90device natausb # ATA-over-USB support 91options ATA_STATIC_ID # Static device numbering 92 93# SCSI Controllers 94device ahc # AHA2940 and onboard AIC7xxx devices 95device ahd # AHA39320/29320 and onboard AIC79xx devices 96device amd # AMD 53C974 (Tekram DC-390(T)) 97device isp # Qlogic family 98#device ispfw # Firmware for QLogic HBAs- normally a module 99device mpt # LSI-Logic MPT/Fusion 100device mps # LSI-Logic MPT-Fusion 2 101device ncr # NCR/Symbios Logic 102device sym # NCR/Symbios Logic (newer chipsets) 103options SYM_SETUP_LP_PROBE_MAP=0x40 104 # Allow ncr to attach legacy NCR devices when 105 # both sym and ncr are configured 106 107device adv0 at isa? 108device adw 109device bt 110device aic 111 112device ncv # NCR 53C500 113device nsp # Workbit Ninja SCSI-3 114device stg # TMC 18C30/18C50 115 116# SCSI peripherals 117device scbus # SCSI bus (required) 118device da # Direct Access (disks) 119device sa # Sequential Access (tape etc) 120device cd # CD 121device pass # Passthrough device (direct SCSI access) 122device sg # Passthrough device (linux scsi generic) 123 124# RAID controllers interfaced to the SCSI subsystem 125device arcmsr # Areca SATA II RAID 126device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID 127device ciss # Compaq SmartRAID 5* series 128device dpt # DPT Smartcache - See LINT for options! 129device "hpt27xx" # Highpoint RocketRAID 27xx series 130device hptiop # Highpoint RocketRAID 3xxx series 131device hptmv # Highpoint RocketRAID 182x 132device hptrr # Highpoint RocketRAID 17xx, 22xx, 23xx, 25xx 133device iir # Intel Integrated RAID 134device mly # Mylex AcceleRAID/eXtremeRAID 135device twa # 3ware 9000 series PATA/SATA RAID 136device tws # 3ware 9750 series SATA/SAS RAID 137 138# RAID controllers 139device aac # Adaptec FSA RAID, Dell PERC2/PERC3 140device aacp # SCSI passthrough for aac (requires CAM) 141device amr # AMI MegaRAID 142device amrp # SCSI Passthrough interface (optional, CAM req.) 143device ida # Compaq Smart RAID 144device ips # IBM ServeRAID 145device mlx # Mylex DAC960 family 146device mfi # LSI MegaRAID SAS 147device mfip # LSI MegaRAID SAS passthrough, requires CAM 148device twe # 3ware Escalade 7000/8000's 149 150# VirtIO support 151device virtio # VirtIO core 152device virtio_blk # VirtIO disk driver 153device virtio_pci # VirtIO transport over PCI bus 154 155# atkbdc0 controls both the keyboard and the PS/2 mouse 156device atkbdc0 at isa? port IO_KBD 157device atkbd0 at atkbdc? irq 1 158device psm0 at atkbdc? irq 12 159 160device vga0 at isa? 161 162# kbdmux is the keyboard multiplexer 163device kbdmux 164 165# splash screen/screen saver 166pseudo-device splash 167 168# syscons is the default console driver, resembling an SCO console 169device sc0 at isa? flags 0x100 170options SC_PIXEL_MODE # add support for the raster text mode 171 172device agp # support several AGP chipsets 173 174# HW monitoring devices 175#device aps0 at isa? port 0x1600 176device lm0 at isa? port 0x290 177device it0 at isa? port 0x290 178device it1 at isa? port 0xc00 179device it2 at isa? port 0xd00 180device it3 at isa? port 0x228 181device wbsio0 at isa? port 0x2e 182device wbsio1 at isa? port 0x4e 183device lm#3 at wbsio? 184 185# PCCARD (PCMCIA) support 186device pccard 187device cardbus 188device cbb 189 190# Serial (COM) ports 191device sio0 at isa? port IO_COM1 flags 0x10 irq 4 192device sio1 at isa? port IO_COM2 irq 3 193device sio2 at isa? disable port IO_COM3 irq 5 194device sio3 at isa? disable port IO_COM4 irq 9 195 196# Parallel port 197device ppc0 at isa? irq 7 198device ppbus # Parallel port bus (required) 199device lpt # Printer 200device plip # TCP/IP over parallel 201device ppi # Parallel port interface device 202#device vpo # Requires scbus and da 203 204# PCI Ethernet NICs. 205device de # DEC/Intel DC21x4x (``Tulip'') 206device txp # 3Com 3cR990 (``Typhoon'') 207device vx # 3Com 3c590, 3c595 (``Vortex'') 208 209device em # Intel PRO/1000 adapter Gigabit Ethernet Card (``Wiseman'') 210 # Requires ig_hal 211device igb # Intel Pro/1000 (82575, 82576, 82580, i350) 212 # Requires ig_hal 213device ig_hal # Intel PRO/1000 hardware abstraction layer 214device ixgbe # Intel PRO/10GbE PCIE Ethernet Family 215 216device oce # Emulex OneConnect 10Gb 217 218# PCI Ethernet NICs that use the common MII bus controller code. 219# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! 220device miibus # MII bus support 221device ae # Attansic/Atheros L2 Fast Ethernet 222device age # Attansic/Atheros L1 Gigabit Ethernet 223device alc # Atheros AR8131/AR8132 224device ale # Atheros AR8121/AR8113/AR8114 225device bce # Broadcom NetXtreme II Gigabit Ethernet 226device bfe # Broadcom BCM440x 10/100 Ethernet 227device bnx # Broadcom NetXtreme 5718/57785 Gigabit Ethernet 228device dc # DEC/Intel 21143 and various workalikes 229device et # Agere ET1310 10/100/1000 Ethernet 230device fxp # Intel EtherExpress PRO/100B (82557, 82558) 231device jme # JMicron Gigabit/Fast Ethernet 232device pcn # AMD Am79C97x PCI 10/100 NICs 233device rl # RealTek 8129/8139 234device re # RealTek 8139C+/8169 235device sf # Adaptec AIC-6915 (``Starfire'') 236device sis # Silicon Integrated Systems SiS 900/SiS 7016 237device sk # SysKonnect GEnesis, LinkSys EG1023, D-Link 238device ste # Sundance ST201 (D-Link DFE-550TX) 239device tl # Texas Instruments ThunderLAN 240device tx # SMC EtherPower II (83c170 ``EPIC'') 241device vge # VIA 612x GigE 242device vr # VIA Rhine, Rhine II 243device wb # Winbond W89C840F 244device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') 245device bge # Broadcom BCM570x (``Tigon III'') 246device stge # Sundance/Tamarack TC9021 Gigabit Ethernet 247device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet 248device nfe # NVIDIA nForce MCP 10/100/Gigabit Ethernet 249 250# ISA Ethernet NICs. 251# 'device ed' requires 'device miibus' 252device ed0 at isa? disable port 0x280 irq 10 iomem 0xd8000 253device ex 254# Xircom Ethernet 255device xe 256 257# Wireless NIC cards 258options IEEE80211_DEBUG #enable debugging msgs 259options IEEE80211_SUPPORT_MESH #enable 802.11s D3.0 support 260options IEEE80211_SUPPORT_TDMA #enable TDMA support 261device wlan # 802.11 support 262device wlan_ccmp # 802.11 CCMP support 263device wlan_tkip # 802.11 TKIP support 264device wlan_wep # 802.11 WEP support 265#device wlan_amrr # AMRR 266 267# Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will 268# work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP 269# mode (the factory default). If you set the switches on your ISA 270# card for a manually chosen I/O address and IRQ, you must specify 271# those parameters here. 272device an 273device ath # Atheros NICs 274device ath_hal # Atheros Hardware Access Layer 275options AH_SUPPORT_AR5416 # enable AR5416 tx/rx descriptors 276device ath_rate_sample # Atheros Sample TX rate control algorithm 277device ral # Ralink Technology 802.11 wireless NIC 278device iwn # Intel 279#device rtw # RealTek 802.11 wireless NIC 280# WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really 281# exists only as a PCMCIA device, so there is no ISA attachment needed 282# and resources will always be dynamically assigned by the pccard code. 283device wi 284 285device lnc0 at isa? disable port 0x280 irq 10 drq 0 286device cs0 at isa? disable port 0x300 287device sn0 at isa? disable port 0x300 irq 10 288 289# Pseudo devices - the number indicates how many units to allocate. 290pseudo-device loop # Network loopback 291pseudo-device ether # Ethernet support 292pseudo-device sl 1 # Kernel SLIP 293pseudo-device ppp 1 # Kernel PPP 294pseudo-device tun # Packet tunnel. 295pseudo-device pty # Pseudo-ttys (telnet etc) 296pseudo-device md # Memory "disks" 297pseudo-device gif # IPv6 and IPv4 tunneling 298pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation) 299 300# CARP support 301options CARP 302pseudo-device carp 303 304# The `bpf' pseudo-device enables the Berkeley Packet Filter. 305# Be aware of the administrative consequences of enabling this! 306pseudo-device bpf #Berkeley packet filter 307 308pseudo-device crypto # core crypto support, used by wlan 309 310# USB support 311device uhci # UHCI PCI->USB interface 312device ohci # OHCI PCI->USB interface 313device usb # USB Bus (required) 314#device "usb4bsd" # use this instead of usb for the new stack 315device ugen # Generic 316device uhid # "Human Interface Devices" 317device ukbd # Keyboard 318device ulpt # Printer 319device umass # Disks/Mass storage - Requires scbus and da 320device ums # Mouse 321device uscanner # Scanners 322device urio # Diamond Rio MP3 Player 323# USB Ethernet, requires mii 324device aue # ADMtek USB ethernet 325device axe # ASIX Electronics USB Ethernet 326device cue # CATC USB ethernet 327device kue # Kawasaki LSI USB ethernet 328device rue # RealTek 8150 based USB ethernet 329# USB wireless NICs, requires wlan, wlan_amrr 330#device rum # Ralink Technology RT2501USB/RT2601USB 331#device ural # Ralink Technology RT2500USB 332 333# FireWire support 334device firewire # FireWire bus code 335device sbp # SCSI over FireWire (Requires scbus and da) 336device fwe # Ethernet over FireWire (non-standard!) 337 338# MMC/SD 339device mmc 340device mmcsd 341device sdhci 342