1 /* 2 * (MPSAFE) 3 * 4 * Copyright (c) 2006 David Gwynne <dlg@openbsd.org> 5 * 6 * Permission to use, copy, modify, and distribute this software for any 7 * purpose with or without fee is hereby granted, provided that the above 8 * copyright notice and this permission notice appear in all copies. 9 * 10 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 11 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 12 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 13 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 14 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 15 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 16 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 17 * 18 * 19 * Copyright (c) 2009 The DragonFly Project. All rights reserved. 20 * 21 * This code is derived from software contributed to The DragonFly Project 22 * by Matthew Dillon <dillon@backplane.com> 23 * 24 * Redistribution and use in source and binary forms, with or without 25 * modification, are permitted provided that the following conditions 26 * are met: 27 * 28 * 1. Redistributions of source code must retain the above copyright 29 * notice, this list of conditions and the following disclaimer. 30 * 2. Redistributions in binary form must reproduce the above copyright 31 * notice, this list of conditions and the following disclaimer in 32 * the documentation and/or other materials provided with the 33 * distribution. 34 * 3. Neither the name of The DragonFly Project nor the names of its 35 * contributors may be used to endorse or promote products derived 36 * from this software without specific, prior written permission. 37 * 38 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 39 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 40 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS 41 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE 42 * COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, 43 * INCIDENTAL, SPECIAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES (INCLUDING, 44 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 45 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED 46 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 47 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT 48 * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 49 * SUCH DAMAGE. 50 * 51 * $OpenBSD: ahci.c,v 1.147 2009/02/16 21:19:07 miod Exp $ 52 */ 53 54 #include "ahci.h" 55 56 void ahci_port_interrupt_enable(struct ahci_port *ap); 57 58 int ahci_load_prdt(struct ahci_ccb *); 59 void ahci_unload_prdt(struct ahci_ccb *); 60 static void ahci_load_prdt_callback(void *info, bus_dma_segment_t *segs, 61 int nsegs, int error); 62 void ahci_start(struct ahci_ccb *); 63 int ahci_port_softreset(struct ahci_port *ap); 64 int ahci_port_hardreset(struct ahci_port *ap, int hard); 65 void ahci_port_hardstop(struct ahci_port *ap); 66 67 static void ahci_ata_cmd_timeout_unserialized(void *); 68 void ahci_check_active_timeouts(struct ahci_port *ap); 69 70 void ahci_beg_exclusive_access(struct ahci_port *ap, struct ata_port *at); 71 void ahci_end_exclusive_access(struct ahci_port *ap, struct ata_port *at); 72 void ahci_issue_pending_commands(struct ahci_port *ap, struct ahci_ccb *ccb); 73 void ahci_issue_saved_commands(struct ahci_port *ap, u_int32_t mask); 74 75 int ahci_port_read_ncq_error(struct ahci_port *, int); 76 77 struct ahci_dmamem *ahci_dmamem_alloc(struct ahci_softc *, bus_dma_tag_t tag); 78 void ahci_dmamem_free(struct ahci_softc *, struct ahci_dmamem *); 79 static void ahci_dmamem_saveseg(void *info, bus_dma_segment_t *segs, int nsegs, int error); 80 81 static void ahci_dummy_done(struct ata_xfer *xa); 82 static void ahci_empty_done(struct ahci_ccb *ccb); 83 static void ahci_ata_cmd_done(struct ahci_ccb *ccb); 84 static u_int32_t ahci_pactive(struct ahci_port *ap); 85 86 /* 87 * Initialize the global AHCI hardware. This code does not set up any of 88 * its ports. 89 */ 90 int 91 ahci_init(struct ahci_softc *sc) 92 { 93 u_int32_t cap, pi, pleft; 94 int i; 95 struct ahci_port *ap; 96 97 DPRINTF(AHCI_D_VERBOSE, " GHC 0x%b", 98 ahci_read(sc, AHCI_REG_GHC), AHCI_FMT_GHC); 99 100 /* 101 * save BIOS initialised parameters, enable staggered spin up 102 */ 103 cap = ahci_read(sc, AHCI_REG_CAP); 104 cap &= AHCI_REG_CAP_SMPS; 105 cap |= AHCI_REG_CAP_SSS; 106 pi = ahci_read(sc, AHCI_REG_PI); 107 108 /* 109 * Unconditionally reset the controller, do not conditionalize on 110 * trying to figure it if it was previously active or not. 111 * 112 * NOTE: On AE before HR. The AHCI-1.1 spec has a note in section 113 * 5.2.2.1 regarding this. HR should be set to 1 only after 114 * AE is set to 1. The reset sequence will clear HR when 115 * it completes, and will also clear AE if SAM is 0. AE must 116 * then be set again. When SAM is 1 the AE bit typically reads 117 * as 1 (and is read-only). 118 * 119 * NOTE: Avoid PCI[e] transaction burst by issuing dummy reads, 120 * otherwise the writes will only be separated by a few 121 * nanoseconds. 122 * 123 * NOTE BRICKS (1) 124 * 125 * If you have a port multiplier and it does not have a device 126 * in target 0, and it probes normally, but a later operation 127 * mis-probes a target behind that PM, it is possible for the 128 * port to brick such that only (a) a power cycle of the host 129 * or (b) placing a device in target 0 will fix the problem. 130 * Power cycling the PM has no effect (it works fine on another 131 * host port). This issue is unrelated to CLO. 132 */ 133 /* 134 * Wait for any prior reset sequence to complete 135 */ 136 if (ahci_wait_ne(sc, AHCI_REG_GHC, 137 AHCI_REG_GHC_HR, AHCI_REG_GHC_HR) != 0) { 138 device_printf(sc->sc_dev, "Controller is stuck in reset\n"); 139 return (1); 140 } 141 ahci_write(sc, AHCI_REG_GHC, AHCI_REG_GHC_AE); 142 ahci_os_sleep(500); 143 ahci_read(sc, AHCI_REG_GHC); /* flush */ 144 ahci_write(sc, AHCI_REG_GHC, AHCI_REG_GHC_AE | AHCI_REG_GHC_HR); 145 ahci_os_sleep(500); 146 ahci_read(sc, AHCI_REG_GHC); /* flush */ 147 if (ahci_wait_ne(sc, AHCI_REG_GHC, 148 AHCI_REG_GHC_HR, AHCI_REG_GHC_HR) != 0) { 149 device_printf(sc->sc_dev, "unable to reset controller\n"); 150 return (1); 151 } 152 if (ahci_read(sc, AHCI_REG_GHC) & AHCI_REG_GHC_AE) { 153 device_printf(sc->sc_dev, "AE did not auto-clear!\n"); 154 ahci_write(sc, AHCI_REG_GHC, 0); 155 ahci_os_sleep(500); 156 } 157 158 /* 159 * Enable ahci (global interrupts disabled) 160 * 161 * Restore saved parameters. Avoid pci transaction burst write 162 * by issuing dummy reads. 163 */ 164 ahci_os_sleep(500); 165 ahci_write(sc, AHCI_REG_GHC, AHCI_REG_GHC_AE); 166 ahci_os_sleep(500); 167 168 ahci_read(sc, AHCI_REG_GHC); /* flush */ 169 ahci_write(sc, AHCI_REG_CAP, cap); 170 ahci_write(sc, AHCI_REG_PI, pi); 171 ahci_read(sc, AHCI_REG_GHC); /* flush */ 172 173 /* 174 * Intel hocus pocus in case the BIOS has not set the chip up 175 * properly for AHCI operation. 176 */ 177 if (pci_get_vendor(sc->sc_dev) == PCI_VENDOR_INTEL) { 178 if ((pci_read_config(sc->sc_dev, 0x92, 2) & 0x0F) != 0x0F) 179 device_printf(sc->sc_dev, "Intel hocus pocus\n"); 180 pci_write_config(sc->sc_dev, 0x92, 181 pci_read_config(sc->sc_dev, 0x92, 2) | 0x0F, 2); 182 } 183 184 /* 185 * This is a hack that currently does not appear to have 186 * a significant effect, but I noticed the port registers 187 * do not appear to be completely cleared after the host 188 * controller is reset. 189 * 190 * Use a temporary ap structure so we can call ahci_pwrite(). 191 * 192 * We must be sure to stop the port 193 */ 194 ap = kmalloc(sizeof(*ap), M_DEVBUF, M_WAITOK | M_ZERO); 195 ap->ap_sc = sc; 196 pleft = pi; 197 for (i = 0; i < AHCI_MAX_PORTS; ++i) { 198 if (pleft == 0) 199 break; 200 if ((pi & (1 << i)) == 0) 201 continue; 202 if (bus_space_subregion(sc->sc_iot, sc->sc_ioh, 203 AHCI_PORT_REGION(i), AHCI_PORT_SIZE, &ap->ap_ioh) != 0) { 204 device_printf(sc->sc_dev, "can't map port\n"); 205 return (1); 206 } 207 /* 208 * NOTE! Setting AHCI_PREG_SCTL_DET_DISABLE on AHCI1.0 or 209 * AHCI1.1 can brick the chipset. Not only brick it, 210 * but also crash the PC. The bit seems unreliable 211 * on AHCI1.2 as well. 212 */ 213 ahci_port_stop(ap, 1); 214 ahci_pwrite(ap, AHCI_PREG_SCTL, AHCI_PREG_SCTL_IPM_DISABLED); 215 ahci_pwrite(ap, AHCI_PREG_SERR, -1); 216 ahci_pwrite(ap, AHCI_PREG_IE, 0); 217 ahci_write(ap->ap_sc, AHCI_REG_IS, 1 << i); 218 ahci_pwrite(ap, AHCI_PREG_CMD, 0); 219 ahci_pwrite(ap, AHCI_PREG_IS, -1); 220 sc->sc_portmask |= (1 << i); 221 pleft &= ~(1 << i); 222 } 223 sc->sc_numports = i; 224 kfree(ap, M_DEVBUF); 225 226 return (0); 227 } 228 229 /* 230 * Allocate and initialize an AHCI port. 231 */ 232 int 233 ahci_port_alloc(struct ahci_softc *sc, u_int port) 234 { 235 struct ahci_port *ap; 236 struct ata_port *at; 237 struct ahci_ccb *ccb; 238 u_int64_t dva; 239 u_int32_t cmd; 240 u_int32_t data; 241 struct ahci_cmd_hdr *hdr; 242 struct ahci_cmd_table *table; 243 int rc = ENOMEM; 244 int error; 245 int i; 246 247 ap = kmalloc(sizeof(*ap), M_DEVBUF, M_WAITOK | M_ZERO); 248 ap->ap_err_scratch = kmalloc(512, M_DEVBUF, M_WAITOK | M_ZERO); 249 250 ksnprintf(ap->ap_name, sizeof(ap->ap_name), "%s%d.%d", 251 device_get_name(sc->sc_dev), 252 device_get_unit(sc->sc_dev), 253 port); 254 sc->sc_ports[port] = ap; 255 256 /* 257 * Allocate enough so we never have to reallocate, it makes 258 * it easier. 259 * 260 * ap_pmcount will be reduced by the scan if we encounter the 261 * port multiplier port prior to target 15. 262 * 263 * kmalloc power-of-2 allocations are guaranteed not to cross 264 * a page boundary. Make sure the identify sub-structure in the 265 * at structure does not cross a page boundary, just in case the 266 * part is AHCI-1.1 and can't handle multiple DRQ blocks. 267 */ 268 if (ap->ap_ata[0] == NULL) { 269 int pw2; 270 271 for (pw2 = 1; pw2 < sizeof(*at); pw2 <<= 1) 272 ; 273 for (i = 0; i < AHCI_MAX_PMPORTS; ++i) { 274 at = kmalloc(pw2, M_DEVBUF, M_INTWAIT | M_ZERO); 275 ap->ap_ata[i] = at; 276 at->at_ahci_port = ap; 277 at->at_target = i; 278 at->at_probe = ATA_PROBE_NEED_INIT; 279 at->at_features |= ATA_PORT_F_RESCAN; 280 ksnprintf(at->at_name, sizeof(at->at_name), 281 "%s.%d", ap->ap_name, i); 282 } 283 } 284 if (bus_space_subregion(sc->sc_iot, sc->sc_ioh, 285 AHCI_PORT_REGION(port), AHCI_PORT_SIZE, &ap->ap_ioh) != 0) { 286 device_printf(sc->sc_dev, 287 "unable to create register window for port %d\n", 288 port); 289 goto freeport; 290 } 291 292 ap->ap_sc = sc; 293 ap->ap_num = port; 294 ap->ap_probe = ATA_PROBE_NEED_INIT; 295 ap->link_pwr_mgmt = AHCI_LINK_PWR_MGMT_NONE; 296 ap->sysctl_tree = NULL; 297 TAILQ_INIT(&ap->ap_ccb_free); 298 TAILQ_INIT(&ap->ap_ccb_pending); 299 lockinit(&ap->ap_ccb_lock, "ahcipo", 0, 0); 300 301 /* Disable port interrupts */ 302 ahci_pwrite(ap, AHCI_PREG_IE, 0); 303 ahci_pwrite(ap, AHCI_PREG_SERR, -1); 304 305 /* 306 * Sec 10.1.2 - deinitialise port if it is already running 307 */ 308 cmd = ahci_pread(ap, AHCI_PREG_CMD); 309 kprintf("%s: Caps %b\n", PORTNAME(ap), cmd, AHCI_PFMT_CMD); 310 311 if ((cmd & (AHCI_PREG_CMD_ST | AHCI_PREG_CMD_CR | 312 AHCI_PREG_CMD_FRE | AHCI_PREG_CMD_FR)) || 313 (ahci_pread(ap, AHCI_PREG_SCTL) & AHCI_PREG_SCTL_DET)) { 314 int r; 315 316 r = ahci_port_stop(ap, 1); 317 if (r) { 318 device_printf(sc->sc_dev, 319 "unable to disable %s, ignoring port %d\n", 320 ((r == 2) ? "CR" : "FR"), port); 321 rc = ENXIO; 322 goto freeport; 323 } 324 325 /* Write DET to zero */ 326 ahci_pwrite(ap, AHCI_PREG_SCTL, AHCI_PREG_SCTL_IPM_DISABLED); 327 } 328 329 /* Allocate RFIS */ 330 ap->ap_dmamem_rfis = ahci_dmamem_alloc(sc, sc->sc_tag_rfis); 331 if (ap->ap_dmamem_rfis == NULL) { 332 kprintf("%s: NORFIS\n", PORTNAME(ap)); 333 goto nomem; 334 } 335 336 /* Setup RFIS base address */ 337 ap->ap_rfis = (struct ahci_rfis *) AHCI_DMA_KVA(ap->ap_dmamem_rfis); 338 dva = AHCI_DMA_DVA(ap->ap_dmamem_rfis); 339 ahci_pwrite(ap, AHCI_PREG_FBU, (u_int32_t)(dva >> 32)); 340 ahci_pwrite(ap, AHCI_PREG_FB, (u_int32_t)dva); 341 342 /* Clear SERR before starting FIS reception or ST or anything */ 343 ahci_flush_tfd(ap); 344 ahci_pwrite(ap, AHCI_PREG_SERR, -1); 345 346 /* Enable FIS reception and activate port. */ 347 cmd = ahci_pread(ap, AHCI_PREG_CMD) & ~AHCI_PREG_CMD_ICC; 348 cmd &= ~(AHCI_PREG_CMD_CLO | AHCI_PREG_CMD_PMA); 349 cmd |= AHCI_PREG_CMD_FRE | AHCI_PREG_CMD_POD | AHCI_PREG_CMD_SUD; 350 ahci_pwrite(ap, AHCI_PREG_CMD, cmd | AHCI_PREG_CMD_ICC_ACTIVE); 351 352 /* Check whether port activated. Skip it if not. */ 353 cmd = ahci_pread(ap, AHCI_PREG_CMD) & ~AHCI_PREG_CMD_ICC; 354 if ((cmd & AHCI_PREG_CMD_FRE) == 0) { 355 kprintf("%s: NOT-ACTIVATED\n", PORTNAME(ap)); 356 rc = ENXIO; 357 goto freeport; 358 } 359 360 /* Allocate a CCB for each command slot */ 361 ap->ap_ccbs = kmalloc(sizeof(struct ahci_ccb) * sc->sc_ncmds, M_DEVBUF, 362 M_WAITOK | M_ZERO); 363 if (ap->ap_ccbs == NULL) { 364 device_printf(sc->sc_dev, 365 "unable to allocate command list for port %d\n", 366 port); 367 goto freeport; 368 } 369 370 /* Command List Structures and Command Tables */ 371 ap->ap_dmamem_cmd_list = ahci_dmamem_alloc(sc, sc->sc_tag_cmdh); 372 ap->ap_dmamem_cmd_table = ahci_dmamem_alloc(sc, sc->sc_tag_cmdt); 373 if (ap->ap_dmamem_cmd_table == NULL || 374 ap->ap_dmamem_cmd_list == NULL) { 375 nomem: 376 device_printf(sc->sc_dev, 377 "unable to allocate DMA memory for port %d\n", 378 port); 379 goto freeport; 380 } 381 382 /* Setup command list base address */ 383 dva = AHCI_DMA_DVA(ap->ap_dmamem_cmd_list); 384 ahci_pwrite(ap, AHCI_PREG_CLBU, (u_int32_t)(dva >> 32)); 385 ahci_pwrite(ap, AHCI_PREG_CLB, (u_int32_t)dva); 386 387 /* Split CCB allocation into CCBs and assign to command header/table */ 388 hdr = AHCI_DMA_KVA(ap->ap_dmamem_cmd_list); 389 table = AHCI_DMA_KVA(ap->ap_dmamem_cmd_table); 390 for (i = 0; i < sc->sc_ncmds; i++) { 391 ccb = &ap->ap_ccbs[i]; 392 393 error = bus_dmamap_create(sc->sc_tag_data, BUS_DMA_ALLOCNOW, 394 &ccb->ccb_dmamap); 395 if (error) { 396 device_printf(sc->sc_dev, 397 "unable to create dmamap for port %d " 398 "ccb %d\n", port, i); 399 goto freeport; 400 } 401 402 callout_init_mp(&ccb->ccb_timeout); 403 ccb->ccb_slot = i; 404 ccb->ccb_port = ap; 405 ccb->ccb_cmd_hdr = &hdr[i]; 406 ccb->ccb_cmd_table = &table[i]; 407 dva = AHCI_DMA_DVA(ap->ap_dmamem_cmd_table) + 408 ccb->ccb_slot * sizeof(struct ahci_cmd_table); 409 ccb->ccb_cmd_hdr->ctba_hi = htole32((u_int32_t)(dva >> 32)); 410 ccb->ccb_cmd_hdr->ctba_lo = htole32((u_int32_t)dva); 411 412 ccb->ccb_xa.fis = 413 (struct ata_fis_h2d *)ccb->ccb_cmd_table->cfis; 414 ccb->ccb_xa.packetcmd = ccb->ccb_cmd_table->acmd; 415 ccb->ccb_xa.tag = i; 416 417 ccb->ccb_xa.state = ATA_S_COMPLETE; 418 419 /* 420 * CCB[1] is the error CCB and is not get or put. It is 421 * also used for probing. Numerous HBAs only load the 422 * signature from CCB[1] so it MUST be used for the second 423 * FIS. 424 */ 425 if (i == 1) 426 ap->ap_err_ccb = ccb; 427 else 428 ahci_put_ccb(ccb); 429 } 430 431 /* 432 * Wait for ICC change to complete 433 */ 434 ahci_pwait_clr(ap, AHCI_PREG_CMD, AHCI_PREG_CMD_ICC); 435 436 /* 437 * Calculate the interrupt mask 438 */ 439 data = AHCI_PREG_IE_TFEE | AHCI_PREG_IE_HBFE | 440 AHCI_PREG_IE_IFE | AHCI_PREG_IE_OFE | 441 AHCI_PREG_IE_DPE | AHCI_PREG_IE_UFE | 442 AHCI_PREG_IE_PCE | AHCI_PREG_IE_PRCE | 443 AHCI_PREG_IE_DHRE | AHCI_PREG_IE_SDBE; 444 if (ap->ap_sc->sc_cap & AHCI_REG_CAP_SSNTF) 445 data |= AHCI_PREG_IE_IPME; 446 #ifdef AHCI_COALESCE 447 if (sc->sc_ccc_ports & (1 << port) 448 data &= ~(AHCI_PREG_IE_SDBE | AHCI_PREG_IE_DHRE); 449 #endif 450 ap->ap_intmask = data; 451 452 /* 453 * Start the port helper thread. The helper thread will call 454 * ahci_port_init() so the ports can all be started in parallel. 455 * A failure by ahci_port_init() does not deallocate the port 456 * since we still want hot-plug events. 457 */ 458 ahci_os_start_port(ap); 459 return(0); 460 freeport: 461 ahci_port_free(sc, port); 462 return (rc); 463 } 464 465 /* 466 * [re]initialize an idle port. No CCBs should be active. (from port thread) 467 * 468 * This function is called during the initial port allocation sequence 469 * and is also called on hot-plug insertion. We take no chances and 470 * use a portreset instead of a softreset. 471 * 472 * This function is the only way to move a failed port back to active 473 * status. 474 * 475 * Returns 0 if a device is successfully detected. 476 */ 477 int 478 ahci_port_init(struct ahci_port *ap) 479 { 480 u_int32_t cmd; 481 482 /* 483 * Register [re]initialization 484 * 485 * Flush the TFD and SERR and make sure the port is stopped before 486 * enabling its interrupt. We no longer cycle the port start as 487 * the port should not be started unless a device is present. 488 * 489 * XXX should we enable FIS reception? (FRE)? 490 */ 491 ahci_pwrite(ap, AHCI_PREG_IE, 0); 492 ahci_port_stop(ap, 0); 493 if (ap->ap_sc->sc_cap & AHCI_REG_CAP_SSNTF) 494 ahci_pwrite(ap, AHCI_PREG_SNTF, -1); 495 ahci_flush_tfd(ap); 496 ahci_pwrite(ap, AHCI_PREG_SERR, -1); 497 498 /* 499 * If we are being harsh try to kill the port completely. Normally 500 * we would want to hold on to some of the state the BIOS may have 501 * set, such as SUD (spin up device). 502 * 503 * AP_F_HARSH_REINIT is cleared in the hard reset state 504 */ 505 if (ap->ap_flags & AP_F_HARSH_REINIT) { 506 ahci_pwrite(ap, AHCI_PREG_SCTL, AHCI_PREG_SCTL_IPM_DISABLED); 507 ahci_pwrite(ap, AHCI_PREG_CMD, 0); 508 509 ahci_os_sleep(1000); 510 511 cmd = ahci_pread(ap, AHCI_PREG_CMD) & ~AHCI_PREG_CMD_ICC; 512 cmd &= ~(AHCI_PREG_CMD_CLO | AHCI_PREG_CMD_PMA); 513 cmd |= AHCI_PREG_CMD_FRE | AHCI_PREG_CMD_POD | 514 AHCI_PREG_CMD_SUD; 515 ahci_pwrite(ap, AHCI_PREG_CMD, cmd | AHCI_PREG_CMD_ICC_ACTIVE); 516 cmd = ahci_pread(ap, AHCI_PREG_CMD) & ~AHCI_PREG_CMD_ICC; 517 if ((cmd & AHCI_PREG_CMD_FRE) == 0) { 518 kprintf("%s: Warning: FRE did not come up during " 519 "harsh reinitialization\n", 520 PORTNAME(ap)); 521 } 522 ahci_os_sleep(1000); 523 } 524 525 /* 526 * Clear any pending garbage and re-enable the interrupt before 527 * going to the next stage. 528 */ 529 ap->ap_probe = ATA_PROBE_NEED_HARD_RESET; 530 ap->ap_pmcount = 0; 531 532 if (ap->ap_sc->sc_cap & AHCI_REG_CAP_SSNTF) 533 ahci_pwrite(ap, AHCI_PREG_SNTF, -1); 534 ahci_flush_tfd(ap); 535 ahci_pwrite(ap, AHCI_PREG_SERR, -1); 536 ahci_pwrite(ap, AHCI_PREG_IS, -1); 537 538 ahci_port_interrupt_enable(ap); 539 540 return (0); 541 } 542 543 /* 544 * Enable or re-enable interrupts on a port. 545 * 546 * This routine is called from the port initialization code or from the 547 * helper thread as the real interrupt may be forced to turn off certain 548 * interrupt sources. 549 */ 550 void 551 ahci_port_interrupt_enable(struct ahci_port *ap) 552 { 553 ahci_pwrite(ap, AHCI_PREG_IE, ap->ap_intmask); 554 } 555 556 /* 557 * Manage the agressive link power management capability. 558 */ 559 void 560 ahci_port_link_pwr_mgmt(struct ahci_port *ap, int link_pwr_mgmt) 561 { 562 u_int32_t cmd, sctl; 563 564 if (link_pwr_mgmt == ap->link_pwr_mgmt) 565 return; 566 567 if ((ap->ap_sc->sc_cap & AHCI_REG_CAP_SALP) == 0) { 568 kprintf("%s: link power management not supported.\n", 569 PORTNAME(ap)); 570 return; 571 } 572 573 ahci_os_lock_port(ap); 574 575 if (link_pwr_mgmt == AHCI_LINK_PWR_MGMT_AGGR && 576 (ap->ap_sc->sc_cap & AHCI_REG_CAP_SSC)) { 577 kprintf("%s: enabling aggressive link power management.\n", 578 PORTNAME(ap)); 579 580 ap->link_pwr_mgmt = link_pwr_mgmt; 581 582 ap->ap_intmask &= ~AHCI_PREG_IE_PRCE; 583 ahci_port_interrupt_enable(ap); 584 585 sctl = ahci_pread(ap, AHCI_PREG_SCTL); 586 sctl &= ~(AHCI_PREG_SCTL_IPM_DISABLED); 587 ahci_pwrite(ap, AHCI_PREG_SCTL, sctl); 588 589 /* 590 * Enable device initiated link power management for 591 * directly attached devices that support it. 592 */ 593 if (ap->ap_type != ATA_PORT_T_PM && 594 ap->ap_ata[0]->at_identify.satafsup & (1 << 3)) { 595 if (ahci_set_feature(ap, NULL, ATA_SATAFT_DEVIPS, 1)) 596 kprintf("%s: Could not enable device initiated " 597 "link power management.\n", 598 PORTNAME(ap)); 599 } 600 601 cmd = ahci_pread(ap, AHCI_PREG_CMD); 602 cmd |= AHCI_PREG_CMD_ASP; 603 cmd |= AHCI_PREG_CMD_ALPE; 604 ahci_pwrite(ap, AHCI_PREG_CMD, cmd); 605 606 } else if (link_pwr_mgmt == AHCI_LINK_PWR_MGMT_MEDIUM && 607 (ap->ap_sc->sc_cap & AHCI_REG_CAP_PSC)) { 608 kprintf("%s: enabling medium link power management.\n", 609 PORTNAME(ap)); 610 611 ap->link_pwr_mgmt = link_pwr_mgmt; 612 613 ap->ap_intmask &= ~AHCI_PREG_IE_PRCE; 614 ahci_port_interrupt_enable(ap); 615 616 sctl = ahci_pread(ap, AHCI_PREG_SCTL); 617 sctl |= AHCI_PREG_SCTL_IPM_DISABLED; 618 sctl &= ~AHCI_PREG_SCTL_IPM_NOPARTIAL; 619 ahci_pwrite(ap, AHCI_PREG_SCTL, sctl); 620 621 cmd = ahci_pread(ap, AHCI_PREG_CMD); 622 cmd &= ~AHCI_PREG_CMD_ASP; 623 cmd |= AHCI_PREG_CMD_ALPE; 624 ahci_pwrite(ap, AHCI_PREG_CMD, cmd); 625 626 } else if (link_pwr_mgmt == AHCI_LINK_PWR_MGMT_NONE) { 627 kprintf("%s: disabling link power management.\n", 628 PORTNAME(ap)); 629 630 /* Disable device initiated link power management */ 631 if (ap->ap_type != ATA_PORT_T_PM && 632 ap->ap_ata[0]->at_identify.satafsup & (1 << 3)) 633 ahci_set_feature(ap, NULL, ATA_SATAFT_DEVIPS, 0); 634 635 cmd = ahci_pread(ap, AHCI_PREG_CMD); 636 cmd &= ~(AHCI_PREG_CMD_ALPE | AHCI_PREG_CMD_ASP); 637 ahci_pwrite(ap, AHCI_PREG_CMD, cmd); 638 639 sctl = ahci_pread(ap, AHCI_PREG_SCTL); 640 sctl |= AHCI_PREG_SCTL_IPM_DISABLED; 641 ahci_pwrite(ap, AHCI_PREG_SCTL, sctl); 642 643 /* let the drive come back to avoid PRCS interrupts later */ 644 ahci_os_unlock_port(ap); 645 ahci_os_sleep(1000); 646 ahci_os_lock_port(ap); 647 648 ahci_pwrite(ap, AHCI_PREG_SERR, 649 AHCI_PREG_SERR_DIAG_N | AHCI_PREG_SERR_DIAG_W); 650 ahci_pwrite(ap, AHCI_PREG_IS, AHCI_PREG_IS_PRCS); 651 652 ap->ap_intmask |= AHCI_PREG_IE_PRCE; 653 ahci_port_interrupt_enable(ap); 654 655 ap->link_pwr_mgmt = link_pwr_mgmt; 656 } else { 657 kprintf("%s: unsupported link power management state %d.\n", 658 PORTNAME(ap), link_pwr_mgmt); 659 } 660 661 ahci_os_unlock_port(ap); 662 } 663 664 /* 665 * Return current link power state. 666 */ 667 int 668 ahci_port_link_pwr_state(struct ahci_port *ap) 669 { 670 uint32_t r; 671 672 r = ahci_pread(ap, AHCI_PREG_SSTS); 673 switch (r & SATA_PM_SSTS_IPM) { 674 case SATA_PM_SSTS_IPM_ACTIVE: 675 return 1; 676 case SATA_PM_SSTS_IPM_PARTIAL: 677 return 2; 678 case SATA_PM_SSTS_IPM_SLUMBER: 679 return 3; 680 default: 681 return 0; 682 } 683 } 684 685 /* 686 * Run the port / target state machine from a main context. 687 * 688 * The state machine for the port is always run. 689 * 690 * If atx is non-NULL run the state machine for a particular target. 691 * If atx is NULL run the state machine for all targets. 692 */ 693 void 694 ahci_port_state_machine(struct ahci_port *ap, int initial) 695 { 696 struct ata_port *at; 697 u_int32_t data; 698 int target; 699 int didsleep; 700 int loop; 701 702 /* 703 * State machine for port. Note that CAM is not yet associated 704 * during the initial parallel probe and the port's probe state 705 * will not get past ATA_PROBE_NEED_IDENT. 706 */ 707 { 708 if (initial == 0 && ap->ap_probe <= ATA_PROBE_NEED_HARD_RESET) { 709 kprintf("%s: Waiting 10 seconds on insertion\n", 710 PORTNAME(ap)); 711 ahci_os_sleep(10000); 712 initial = 1; 713 } 714 if (ap->ap_probe == ATA_PROBE_NEED_INIT) 715 ahci_port_init(ap); 716 if (ap->ap_probe == ATA_PROBE_NEED_HARD_RESET) 717 ahci_port_reset(ap, NULL, 1); 718 if (ap->ap_probe == ATA_PROBE_NEED_SOFT_RESET) 719 ahci_port_reset(ap, NULL, 0); 720 if (ap->ap_probe == ATA_PROBE_NEED_IDENT) 721 ahci_cam_probe(ap, NULL); 722 } 723 if (ap->ap_type != ATA_PORT_T_PM) { 724 if (ap->ap_probe == ATA_PROBE_FAILED) { 725 ahci_cam_changed(ap, NULL, 0); 726 } else if (ap->ap_probe >= ATA_PROBE_NEED_IDENT) { 727 ahci_cam_changed(ap, NULL, 1); 728 } 729 return; 730 } 731 732 /* 733 * Port Multiplier state machine. 734 * 735 * Get a mask of changed targets and combine with any runnable 736 * states already present. 737 */ 738 for (loop = 0; ;++loop) { 739 if (ahci_pm_read(ap, 15, SATA_PMREG_EINFO, &data)) { 740 kprintf("%s: PM unable to read hot-plug bitmap\n", 741 PORTNAME(ap)); 742 break; 743 } 744 745 /* 746 * Do at least one loop, then stop if no more state changes 747 * have occured. The PM might not generate a new 748 * notification until we clear the entire bitmap. 749 */ 750 if (loop && data == 0) 751 break; 752 753 /* 754 * New devices showing up in the bitmap require some spin-up 755 * time before we start probing them. Reset didsleep. The 756 * first new device we detect will sleep before probing. 757 * 758 * This only applies to devices whos change bit is set in 759 * the data, and does not apply to the initial boot-time 760 * probe. 761 */ 762 didsleep = 0; 763 764 for (target = 0; target < ap->ap_pmcount; ++target) { 765 at = ap->ap_ata[target]; 766 767 /* 768 * Check the target state for targets behind the PM 769 * which have changed state. This will adjust 770 * at_probe and set ATA_PORT_F_RESCAN 771 * 772 * We want to wait at least 10 seconds before probing 773 * a newly inserted device. If the check status 774 * indicates a device is present and in need of a 775 * hard reset, we make sure we have slept before 776 * continuing. 777 * 778 * We also need to wait at least 1 second for the 779 * PHY state to change after insertion, if we 780 * haven't already waited the 10 seconds. 781 * 782 * NOTE: When pm_check_good finds a good port it 783 * typically starts us in probe state 784 * NEED_HARD_RESET rather than INIT. 785 */ 786 if (data & (1 << target)) { 787 if (initial == 0 && didsleep == 0) 788 ahci_os_sleep(1000); 789 ahci_pm_check_good(ap, target); 790 if (initial == 0 && didsleep == 0 && 791 at->at_probe <= ATA_PROBE_NEED_HARD_RESET 792 ) { 793 didsleep = 1; 794 kprintf("%s: Waiting 10 seconds on insertion\n", PORTNAME(ap)); 795 ahci_os_sleep(10000); 796 } 797 } 798 799 /* 800 * Report hot-plug events before the probe state 801 * really gets hot. Only actual events are reported 802 * here to reduce spew. 803 */ 804 if (data & (1 << target)) { 805 kprintf("%s: HOTPLUG (PM) - ", ATANAME(ap, at)); 806 switch(at->at_probe) { 807 case ATA_PROBE_NEED_INIT: 808 case ATA_PROBE_NEED_HARD_RESET: 809 kprintf("Device inserted\n"); 810 break; 811 case ATA_PROBE_FAILED: 812 kprintf("Device removed\n"); 813 break; 814 default: 815 kprintf("Device probe in progress\n"); 816 break; 817 } 818 } 819 820 /* 821 * Run through the state machine as necessary if 822 * the port is not marked failed. 823 * 824 * The state machine may stop at NEED_IDENT if 825 * CAM is not yet attached. 826 * 827 * Acquire exclusive access to the port while we 828 * are doing this. This prevents command-completion 829 * from queueing commands for non-polled targets 830 * inbetween our probe steps. We need to do this 831 * because the reset probes can generate severe PHY 832 * and protocol errors and soft-brick the port. 833 */ 834 if (at->at_probe != ATA_PROBE_FAILED && 835 at->at_probe != ATA_PROBE_GOOD) { 836 ahci_beg_exclusive_access(ap, at); 837 if (at->at_probe == ATA_PROBE_NEED_INIT) 838 ahci_pm_port_init(ap, at); 839 if (at->at_probe == ATA_PROBE_NEED_HARD_RESET) 840 ahci_port_reset(ap, at, 1); 841 if (at->at_probe == ATA_PROBE_NEED_SOFT_RESET) 842 ahci_port_reset(ap, at, 0); 843 if (at->at_probe == ATA_PROBE_NEED_IDENT) 844 ahci_cam_probe(ap, at); 845 ahci_end_exclusive_access(ap, at); 846 } 847 848 /* 849 * Add or remove from CAM 850 */ 851 if (at->at_features & ATA_PORT_F_RESCAN) { 852 at->at_features &= ~ATA_PORT_F_RESCAN; 853 if (at->at_probe == ATA_PROBE_FAILED) { 854 ahci_cam_changed(ap, at, 0); 855 } else if (at->at_probe >= ATA_PROBE_NEED_IDENT) { 856 ahci_cam_changed(ap, at, 1); 857 } 858 } 859 data &= ~(1 << target); 860 } 861 if (data) { 862 kprintf("%s: WARNING (PM): extra bits set in " 863 "EINFO: %08x\n", PORTNAME(ap), data); 864 while (target < AHCI_MAX_PMPORTS) { 865 ahci_pm_check_good(ap, target); 866 ++target; 867 } 868 } 869 } 870 } 871 872 873 /* 874 * De-initialize and detach a port. 875 */ 876 void 877 ahci_port_free(struct ahci_softc *sc, u_int port) 878 { 879 struct ahci_port *ap = sc->sc_ports[port]; 880 struct ahci_ccb *ccb; 881 int i; 882 883 /* 884 * Ensure port is disabled and its interrupts are all flushed. 885 */ 886 if (ap->ap_sc) { 887 ahci_port_stop(ap, 1); 888 ahci_os_stop_port(ap); 889 ahci_pwrite(ap, AHCI_PREG_CMD, 0); 890 ahci_pwrite(ap, AHCI_PREG_IE, 0); 891 ahci_pwrite(ap, AHCI_PREG_IS, ahci_pread(ap, AHCI_PREG_IS)); 892 ahci_write(sc, AHCI_REG_IS, 1 << port); 893 } 894 895 if (ap->ap_ccbs) { 896 while ((ccb = ahci_get_ccb(ap)) != NULL) { 897 if (ccb->ccb_dmamap) { 898 bus_dmamap_destroy(sc->sc_tag_data, 899 ccb->ccb_dmamap); 900 ccb->ccb_dmamap = NULL; 901 } 902 } 903 if ((ccb = ap->ap_err_ccb) != NULL) { 904 if (ccb->ccb_dmamap) { 905 bus_dmamap_destroy(sc->sc_tag_data, 906 ccb->ccb_dmamap); 907 ccb->ccb_dmamap = NULL; 908 } 909 ap->ap_err_ccb = NULL; 910 } 911 kfree(ap->ap_ccbs, M_DEVBUF); 912 ap->ap_ccbs = NULL; 913 } 914 915 if (ap->ap_dmamem_cmd_list) { 916 ahci_dmamem_free(sc, ap->ap_dmamem_cmd_list); 917 ap->ap_dmamem_cmd_list = NULL; 918 } 919 if (ap->ap_dmamem_rfis) { 920 ahci_dmamem_free(sc, ap->ap_dmamem_rfis); 921 ap->ap_dmamem_rfis = NULL; 922 } 923 if (ap->ap_dmamem_cmd_table) { 924 ahci_dmamem_free(sc, ap->ap_dmamem_cmd_table); 925 ap->ap_dmamem_cmd_table = NULL; 926 } 927 if (ap->ap_ata) { 928 for (i = 0; i < AHCI_MAX_PMPORTS; ++i) { 929 if (ap->ap_ata[i]) { 930 kfree(ap->ap_ata[i], M_DEVBUF); 931 ap->ap_ata[i] = NULL; 932 } 933 } 934 } 935 if (ap->ap_err_scratch) { 936 kfree(ap->ap_err_scratch, M_DEVBUF); 937 ap->ap_err_scratch = NULL; 938 } 939 940 /* bus_space(9) says we dont free the subregions handle */ 941 942 kfree(ap, M_DEVBUF); 943 sc->sc_ports[port] = NULL; 944 } 945 946 static 947 u_int32_t 948 ahci_pactive(struct ahci_port *ap) 949 { 950 u_int32_t mask; 951 952 mask = ahci_pread(ap, AHCI_PREG_CI); 953 if (ap->ap_sc->sc_cap & AHCI_REG_CAP_SNCQ) 954 mask |= ahci_pread(ap, AHCI_PREG_SACT); 955 return(mask); 956 } 957 958 /* 959 * Start high-level command processing on the port 960 */ 961 int 962 ahci_port_start(struct ahci_port *ap) 963 { 964 u_int32_t r, s, is, tfd; 965 966 /* 967 * FRE must be turned on before ST. Wait for FR to go active 968 * before turning on ST. The spec doesn't seem to think this 969 * is necessary but waiting here avoids an on-off race in the 970 * ahci_port_stop() code. 971 */ 972 r = ahci_pread(ap, AHCI_PREG_CMD); 973 if ((r & AHCI_PREG_CMD_FRE) == 0) { 974 r |= AHCI_PREG_CMD_FRE; 975 ahci_pwrite(ap, AHCI_PREG_CMD, r); 976 } 977 if ((ap->ap_sc->sc_flags & AHCI_F_IGN_FR) == 0) { 978 if (ahci_pwait_set(ap, AHCI_PREG_CMD, AHCI_PREG_CMD_FR)) { 979 kprintf("%s: Cannot start FIS reception\n", 980 PORTNAME(ap)); 981 return (2); 982 } 983 } else { 984 ahci_os_sleep(10); 985 } 986 987 /* 988 * Turn on ST, wait for CR to come up. 989 */ 990 r |= AHCI_PREG_CMD_ST; 991 ahci_pwrite(ap, AHCI_PREG_CMD, r); 992 if (ahci_pwait_set_to(ap, 2000, AHCI_PREG_CMD, AHCI_PREG_CMD_CR)) { 993 s = ahci_pread(ap, AHCI_PREG_SERR); 994 is = ahci_pread(ap, AHCI_PREG_IS); 995 tfd = ahci_pread(ap, AHCI_PREG_TFD); 996 kprintf("%s: Cannot start command DMA\n" 997 "NCMP=%b NSERR=%b\n" 998 "NEWIS=%b\n" 999 "NEWTFD=%b\n", 1000 PORTNAME(ap), 1001 r, AHCI_PFMT_CMD, s, AHCI_PFMT_SERR, 1002 is, AHCI_PFMT_IS, 1003 tfd, AHCI_PFMT_TFD_STS); 1004 return (1); 1005 } 1006 1007 #ifdef AHCI_COALESCE 1008 /* 1009 * (Re-)enable coalescing on the port. 1010 */ 1011 if (ap->ap_sc->sc_ccc_ports & (1 << ap->ap_num)) { 1012 ap->ap_sc->sc_ccc_ports_cur |= (1 << ap->ap_num); 1013 ahci_write(ap->ap_sc, AHCI_REG_CCC_PORTS, 1014 ap->ap_sc->sc_ccc_ports_cur); 1015 } 1016 #endif 1017 1018 return (0); 1019 } 1020 1021 /* 1022 * Stop high-level command processing on a port 1023 * 1024 * WARNING! If the port is stopped while CR is still active our saved 1025 * CI/SACT will race any commands completed by the command 1026 * processor prior to being able to stop. Thus we never call 1027 * this function unless we intend to dispose of any remaining 1028 * active commands. In particular, this complicates the timeout 1029 * code. 1030 */ 1031 int 1032 ahci_port_stop(struct ahci_port *ap, int stop_fis_rx) 1033 { 1034 u_int32_t r; 1035 1036 #ifdef AHCI_COALESCE 1037 /* 1038 * Disable coalescing on the port while it is stopped. 1039 */ 1040 if (ap->ap_sc->sc_ccc_ports & (1 << ap->ap_num)) { 1041 ap->ap_sc->sc_ccc_ports_cur &= ~(1 << ap->ap_num); 1042 ahci_write(ap->ap_sc, AHCI_REG_CCC_PORTS, 1043 ap->ap_sc->sc_ccc_ports_cur); 1044 } 1045 #endif 1046 1047 /* 1048 * Turn off ST, then wait for CR to go off. 1049 */ 1050 r = ahci_pread(ap, AHCI_PREG_CMD) & ~AHCI_PREG_CMD_ICC; 1051 r &= ~AHCI_PREG_CMD_ST; 1052 ahci_pwrite(ap, AHCI_PREG_CMD, r); 1053 1054 if (ahci_pwait_clr(ap, AHCI_PREG_CMD, AHCI_PREG_CMD_CR)) { 1055 kprintf("%s: Port bricked, unable to stop (ST)\n", 1056 PORTNAME(ap)); 1057 return (1); 1058 } 1059 1060 #if 0 1061 /* 1062 * Turn off FRE, then wait for FR to go off. FRE cannot 1063 * be turned off until CR transitions to 0. 1064 */ 1065 if ((r & AHCI_PREG_CMD_FR) == 0) { 1066 kprintf("%s: FR stopped, clear FRE for next start\n", 1067 PORTNAME(ap)); 1068 stop_fis_rx = 2; 1069 } 1070 #endif 1071 if (stop_fis_rx) { 1072 r &= ~AHCI_PREG_CMD_FRE; 1073 ahci_pwrite(ap, AHCI_PREG_CMD, r); 1074 if (ahci_pwait_clr(ap, AHCI_PREG_CMD, AHCI_PREG_CMD_FR)) { 1075 kprintf("%s: Port bricked, unable to stop (FRE)\n", 1076 PORTNAME(ap)); 1077 return (2); 1078 } 1079 } 1080 1081 return (0); 1082 } 1083 1084 /* 1085 * AHCI command list override -> forcibly clear TFD.STS.{BSY,DRQ} 1086 */ 1087 int 1088 ahci_port_clo(struct ahci_port *ap) 1089 { 1090 struct ahci_softc *sc = ap->ap_sc; 1091 u_int32_t cmd; 1092 1093 /* Only attempt CLO if supported by controller */ 1094 if ((ahci_read(sc, AHCI_REG_CAP) & AHCI_REG_CAP_SCLO) == 0) 1095 return (1); 1096 1097 /* Issue CLO */ 1098 cmd = ahci_pread(ap, AHCI_PREG_CMD) & ~AHCI_PREG_CMD_ICC; 1099 ahci_pwrite(ap, AHCI_PREG_CMD, cmd | AHCI_PREG_CMD_CLO); 1100 1101 /* Wait for completion */ 1102 if (ahci_pwait_clr(ap, AHCI_PREG_CMD, AHCI_PREG_CMD_CLO)) { 1103 kprintf("%s: CLO did not complete\n", PORTNAME(ap)); 1104 return (1); 1105 } 1106 1107 return (0); 1108 } 1109 1110 /* 1111 * Reset a port. 1112 * 1113 * If hard is 0 perform a softreset of the port. 1114 * If hard is 1 perform a hard reset of the port. 1115 * 1116 * If at is non-NULL an indirect port via a port-multiplier is being 1117 * reset, otherwise a direct port is being reset. 1118 * 1119 * NOTE: Indirect ports can only be soft-reset. 1120 */ 1121 int 1122 ahci_port_reset(struct ahci_port *ap, struct ata_port *at, int hard) 1123 { 1124 int rc; 1125 1126 if (hard) { 1127 if (at) 1128 rc = ahci_pm_hardreset(ap, at->at_target, hard); 1129 else 1130 rc = ahci_port_hardreset(ap, hard); 1131 } else { 1132 if (at) 1133 rc = ahci_pm_softreset(ap, at->at_target); 1134 else 1135 rc = ahci_port_softreset(ap); 1136 } 1137 return(rc); 1138 } 1139 1140 /* 1141 * AHCI soft reset, Section 10.4.1 1142 * 1143 * (at) will be NULL when soft-resetting a directly-attached device, and 1144 * non-NULL when soft-resetting a device through a port multiplier. 1145 * 1146 * This function keeps port communications intact and attempts to generate 1147 * a reset to the connected device using device commands. 1148 */ 1149 int 1150 ahci_port_softreset(struct ahci_port *ap) 1151 { 1152 struct ahci_ccb *ccb = NULL; 1153 struct ahci_cmd_hdr *cmd_slot; 1154 u_int8_t *fis; 1155 int error; 1156 1157 error = EIO; 1158 1159 if (bootverbose) { 1160 kprintf("%s: START SOFTRESET %b\n", PORTNAME(ap), 1161 ahci_pread(ap, AHCI_PREG_CMD), AHCI_PFMT_CMD); 1162 } 1163 1164 DPRINTF(AHCI_D_VERBOSE, "%s: soft reset\n", PORTNAME(ap)); 1165 1166 crit_enter(); 1167 ap->ap_flags |= AP_F_IN_RESET; 1168 ap->ap_state = AP_S_NORMAL; 1169 1170 /* 1171 * Remember port state in cmd (main to restore start/stop) 1172 * 1173 * Idle port. 1174 */ 1175 if (ahci_port_stop(ap, 0)) { 1176 kprintf("%s: failed to stop port, cannot softreset\n", 1177 PORTNAME(ap)); 1178 goto err; 1179 } 1180 1181 /* 1182 * Request CLO if device appears hung. 1183 */ 1184 if (ahci_pread(ap, AHCI_PREG_TFD) & 1185 (AHCI_PREG_TFD_STS_BSY | AHCI_PREG_TFD_STS_DRQ)) { 1186 ahci_port_clo(ap); 1187 } 1188 1189 /* 1190 * This is an attempt to clear errors so a new signature will 1191 * be latched. It isn't working properly. XXX 1192 */ 1193 ahci_flush_tfd(ap); 1194 ahci_pwrite(ap, AHCI_PREG_SERR, -1); 1195 1196 /* Restart port */ 1197 if (ahci_port_start(ap)) { 1198 kprintf("%s: failed to start port, cannot softreset\n", 1199 PORTNAME(ap)); 1200 goto err; 1201 } 1202 1203 /* Check whether CLO worked */ 1204 if (ahci_pwait_clr(ap, AHCI_PREG_TFD, 1205 AHCI_PREG_TFD_STS_BSY | AHCI_PREG_TFD_STS_DRQ)) { 1206 kprintf("%s: CLO %s, need port reset\n", 1207 PORTNAME(ap), 1208 (ahci_read(ap->ap_sc, AHCI_REG_CAP) & AHCI_REG_CAP_SCLO) 1209 ? "failed" : "unsupported"); 1210 error = EBUSY; 1211 goto err; 1212 } 1213 1214 /* 1215 * Prep first D2H command with SRST feature & clear busy/reset flags 1216 * 1217 * It is unclear which other fields in the FIS are used. Just zero 1218 * everything. 1219 * 1220 * NOTE! This CCB is used for both the first and second commands. 1221 * The second command must use CCB slot 1 to properly load 1222 * the signature. 1223 */ 1224 ccb = ahci_get_err_ccb(ap); 1225 ccb->ccb_xa.complete = ahci_dummy_done; 1226 ccb->ccb_xa.flags = ATA_F_POLL | ATA_F_EXCLUSIVE; 1227 KKASSERT(ccb->ccb_slot == 1); 1228 ccb->ccb_xa.at = NULL; 1229 cmd_slot = ccb->ccb_cmd_hdr; 1230 1231 fis = ccb->ccb_cmd_table->cfis; 1232 bzero(fis, sizeof(ccb->ccb_cmd_table->cfis)); 1233 fis[0] = ATA_FIS_TYPE_H2D; 1234 fis[15] = ATA_FIS_CONTROL_SRST|ATA_FIS_CONTROL_4BIT; 1235 1236 cmd_slot->prdtl = 0; 1237 cmd_slot->flags = htole16(5); /* FIS length: 5 DWORDS */ 1238 cmd_slot->flags |= htole16(AHCI_CMD_LIST_FLAG_C); /* Clear busy on OK */ 1239 cmd_slot->flags |= htole16(AHCI_CMD_LIST_FLAG_R); /* Reset */ 1240 1241 ccb->ccb_xa.state = ATA_S_PENDING; 1242 1243 if (ahci_poll(ccb, 1000, ahci_quick_timeout) != ATA_S_COMPLETE) { 1244 kprintf("%s: First FIS failed\n", PORTNAME(ap)); 1245 goto err; 1246 } 1247 1248 /* 1249 * WARNING! TIME SENSITIVE SPACE! WARNING! 1250 * 1251 * The two FISes are supposed to be back to back. Don't issue other 1252 * commands or even delay if we can help it. 1253 */ 1254 1255 /* 1256 * Prep second D2H command to read status and complete reset sequence 1257 * AHCI 10.4.1 and "Serial ATA Revision 2.6". I can't find the ATA 1258 * Rev 2.6 and it is unclear how the second FIS should be set up 1259 * from the AHCI document. 1260 * 1261 * It is unclear which other fields in the FIS are used. Just zero 1262 * everything. 1263 */ 1264 ccb->ccb_xa.flags = ATA_F_POLL | ATA_F_AUTOSENSE | ATA_F_EXCLUSIVE; 1265 1266 bzero(fis, sizeof(ccb->ccb_cmd_table->cfis)); 1267 fis[0] = ATA_FIS_TYPE_H2D; 1268 fis[15] = ATA_FIS_CONTROL_4BIT; 1269 1270 cmd_slot->prdtl = 0; 1271 cmd_slot->flags = htole16(5); /* FIS length: 5 DWORDS */ 1272 1273 ccb->ccb_xa.state = ATA_S_PENDING; 1274 if (ahci_poll(ccb, 1000, ahci_quick_timeout) != ATA_S_COMPLETE) { 1275 kprintf("%s: Second FIS failed\n", PORTNAME(ap)); 1276 goto err; 1277 } 1278 1279 if (ahci_pwait_clr(ap, AHCI_PREG_TFD, 1280 AHCI_PREG_TFD_STS_BSY | AHCI_PREG_TFD_STS_DRQ)) { 1281 kprintf("%s: device didn't come ready after reset, TFD: 0x%b\n", 1282 PORTNAME(ap), 1283 ahci_pread(ap, AHCI_PREG_TFD), AHCI_PFMT_TFD_STS); 1284 error = EBUSY; 1285 goto err; 1286 } 1287 1288 /* 1289 * If the softreset is trying to clear a BSY condition after a 1290 * normal portreset we assign the port type. 1291 * 1292 * If the softreset is being run first as part of the ccb error 1293 * processing code then report if the device signature changed 1294 * unexpectedly. 1295 */ 1296 ahci_os_sleep(100); 1297 if (ap->ap_type == ATA_PORT_T_NONE) { 1298 ap->ap_type = ahci_port_signature_detect(ap, NULL); 1299 } else { 1300 if (ahci_port_signature_detect(ap, NULL) != ap->ap_type) { 1301 kprintf("%s: device signature unexpectedly " 1302 "changed\n", PORTNAME(ap)); 1303 error = EBUSY; /* XXX */ 1304 } 1305 } 1306 error = 0; 1307 1308 ahci_os_sleep(3); 1309 err: 1310 if (ccb != NULL) { 1311 ahci_put_err_ccb(ccb); 1312 1313 /* 1314 * If the target is busy use CLO to clear the busy 1315 * condition. The BSY should be cleared on the next 1316 * start. 1317 */ 1318 if (ahci_pread(ap, AHCI_PREG_TFD) & 1319 (AHCI_PREG_TFD_STS_BSY | AHCI_PREG_TFD_STS_DRQ)) { 1320 ahci_port_clo(ap); 1321 } 1322 } 1323 1324 /* 1325 * If we failed to softreset make the port quiescent, otherwise 1326 * make sure the port's start/stop state matches what it was on 1327 * entry. 1328 * 1329 * Don't kill the port if the softreset is on a port multiplier 1330 * target, that would kill all the targets! 1331 */ 1332 if (error) { 1333 ahci_port_hardstop(ap); 1334 /* ap_probe set to failed */ 1335 } else { 1336 ap->ap_probe = ATA_PROBE_NEED_IDENT; 1337 ap->ap_pmcount = 1; 1338 ahci_port_start(ap); 1339 } 1340 ap->ap_flags &= ~AP_F_IN_RESET; 1341 crit_exit(); 1342 1343 if (bootverbose) 1344 kprintf("%s: END SOFTRESET\n", PORTNAME(ap)); 1345 1346 return (error); 1347 } 1348 1349 /* 1350 * Issue just do the core COMRESET and basic device detection on a port. 1351 * 1352 * NOTE: Only called by ahci_port_hardreset(). 1353 */ 1354 static int 1355 ahci_comreset(struct ahci_port *ap, int *pmdetectp) 1356 { 1357 u_int32_t cmd; 1358 u_int32_t r; 1359 int error; 1360 int loop; 1361 int retries = 0; 1362 1363 /* 1364 * Idle the port, 1365 */ 1366 *pmdetectp = 0; 1367 ahci_port_stop(ap, 0); 1368 ap->ap_state = AP_S_NORMAL; 1369 ahci_os_sleep(10); 1370 1371 /* 1372 * The port may have been quiescent with its SUD bit cleared, so 1373 * set the SUD (spin up device). 1374 * 1375 * NOTE: I do not know if SUD is a hardware pin/low-level signal 1376 * or if it is messaged. 1377 */ 1378 cmd = ahci_pread(ap, AHCI_PREG_CMD) & ~AHCI_PREG_CMD_ICC; 1379 1380 cmd |= AHCI_PREG_CMD_SUD | AHCI_PREG_CMD_POD; 1381 ahci_pwrite(ap, AHCI_PREG_CMD, cmd); 1382 ahci_os_sleep(10); 1383 1384 /* 1385 * Make sure that all power management is disabled. 1386 * 1387 * NOTE! AHCI_PREG_SCTL_DET_DISABLE seems to be highly unreliable 1388 * on multiple chipsets and can brick the chipset or even 1389 * the whole PC. Never use it. 1390 */ 1391 ap->ap_type = ATA_PORT_T_NONE; 1392 1393 r = AHCI_PREG_SCTL_IPM_DISABLED | 1394 AHCI_PREG_SCTL_SPM_DISABLED; 1395 ahci_pwrite(ap, AHCI_PREG_SCTL, r); 1396 1397 retry: 1398 /* 1399 * Give the new power management state time to settle, then clear 1400 * pending status. 1401 */ 1402 ahci_os_sleep(1000); 1403 ahci_flush_tfd(ap); 1404 ahci_pwrite(ap, AHCI_PREG_SERR, -1); 1405 1406 /* 1407 * Start transmitting COMRESET. The spec says that COMRESET must 1408 * be sent for at least 1ms but in actual fact numerous devices 1409 * appear to take much longer. Delay a whole second here. 1410 * 1411 * In addition, SATA-3 ports can take longer to train, so even 1412 * SATA-2 devices which would normally detect very quickly may 1413 * take longer when plugged into a SATA-3 port. 1414 */ 1415 r |= AHCI_PREG_SCTL_DET_INIT; 1416 switch(AhciForceGen) { 1417 case 0: 1418 r |= AHCI_PREG_SCTL_SPD_ANY; 1419 break; 1420 case 1: 1421 r |= AHCI_PREG_SCTL_SPD_GEN1; 1422 break; 1423 case 2: 1424 r |= AHCI_PREG_SCTL_SPD_GEN2; 1425 break; 1426 case 3: 1427 r |= AHCI_PREG_SCTL_SPD_GEN3; 1428 break; 1429 default: 1430 r |= AHCI_PREG_SCTL_SPD_GEN3; 1431 break; 1432 } 1433 ahci_pwrite(ap, AHCI_PREG_SCTL, r); 1434 ahci_os_sleep(1000); 1435 1436 ap->ap_flags &= ~AP_F_HARSH_REINIT; 1437 1438 /* 1439 * Only SERR_DIAG_X needs to be cleared for TFD updates, but 1440 * since we are hard-resetting the port we might as well clear 1441 * the whole enchillada. Also be sure to clear any spurious BSY 1442 * prior to clearing INIT. 1443 * 1444 * Wait 1 whole second after clearing INIT before checking 1445 * the device detection bits in an attempt to work around chipsets 1446 * which do not properly mask PCS/PRCS during low level init. 1447 */ 1448 ahci_flush_tfd(ap); 1449 ahci_pwrite(ap, AHCI_PREG_SERR, -1); 1450 /* ahci_port_clo(ap);*/ 1451 ahci_os_sleep(10); 1452 1453 r &= ~AHCI_PREG_SCTL_SPD; 1454 r &= ~AHCI_PREG_SCTL_DET_INIT; 1455 r |= AHCI_PREG_SCTL_DET_NONE; 1456 ahci_pwrite(ap, AHCI_PREG_SCTL, r); 1457 ahci_os_sleep(1000); 1458 1459 /* 1460 * Try to determine if there is a device on the port. 1461 * 1462 * Give the device 3/10 second to at least be detected. 1463 * If we fail clear PRCS (phy detect) since we may cycled 1464 * the phy and probably caused another PRCS interrupt. 1465 */ 1466 loop = 300; 1467 while (loop > 0) { 1468 r = ahci_pread(ap, AHCI_PREG_SSTS); 1469 if (r & AHCI_PREG_SSTS_DET) 1470 break; 1471 loop -= ahci_os_softsleep(); 1472 } 1473 if (loop == 0) { 1474 ahci_pwrite(ap, AHCI_PREG_IS, AHCI_PREG_IS_PRCS); 1475 if (bootverbose) { 1476 kprintf("%s: Port appears to be unplugged\n", 1477 PORTNAME(ap)); 1478 } 1479 error = ENODEV; 1480 goto done; 1481 } 1482 1483 /* 1484 * There is something on the port. Regardless of what happens 1485 * after this tell the caller to try to detect a port multiplier. 1486 * 1487 * Give the device 3 seconds to fully negotiate. 1488 */ 1489 *pmdetectp = 1; 1490 1491 if (ahci_pwait_eq(ap, 3000, AHCI_PREG_SSTS, 1492 AHCI_PREG_SSTS_DET, AHCI_PREG_SSTS_DET_DEV)) { 1493 if (bootverbose) { 1494 kprintf("%s: Device may be powered down\n", 1495 PORTNAME(ap)); 1496 } 1497 error = ENODEV; 1498 goto done; 1499 } 1500 1501 /* 1502 * We got something that definitely looks like a device. Give 1503 * the device time to send us its first D2H FIS. Waiting for 1504 * BSY to clear accomplishes this. 1505 * 1506 * NOTE: A port multiplier may or may not clear BSY here, 1507 * depending on what is sitting in target 0 behind it. 1508 * 1509 * NOTE: Intel SSDs seem to have compatibility problems with Intel 1510 * mobo's on cold boots and may leave BSY set. A single 1511 * retry works around the problem. This is definitely a bug 1512 * with the mobo and/or the SSD and does not appear to occur 1513 * with other devices connected to the same port. 1514 */ 1515 ahci_flush_tfd(ap); 1516 if (ahci_pwait_clr_to(ap, 8000, AHCI_PREG_TFD, 1517 AHCI_PREG_TFD_STS_BSY | AHCI_PREG_TFD_STS_DRQ)) { 1518 kprintf("%s: Device BUSY: %b\n", 1519 PORTNAME(ap), 1520 ahci_pread(ap, AHCI_PREG_TFD), 1521 AHCI_PFMT_TFD_STS); 1522 if (retries == 0) { 1523 kprintf("%s: Retrying\n", PORTNAME(ap)); 1524 retries = 1; 1525 goto retry; 1526 } 1527 error = EBUSY; 1528 } else { 1529 error = 0; 1530 } 1531 1532 done: 1533 ahci_flush_tfd(ap); 1534 return error; 1535 } 1536 1537 1538 /* 1539 * AHCI port reset, Section 10.4.2 1540 * 1541 * This function does a hard reset of the port. Note that the device 1542 * connected to the port could still end-up hung. 1543 */ 1544 int 1545 ahci_port_hardreset(struct ahci_port *ap, int hard) 1546 { 1547 u_int32_t data; 1548 int error; 1549 int pmdetect; 1550 1551 if (bootverbose) 1552 kprintf("%s: START HARDRESET\n", PORTNAME(ap)); 1553 ap->ap_flags |= AP_F_IN_RESET; 1554 1555 error = ahci_comreset(ap, &pmdetect); 1556 1557 /* 1558 * We may be asked to perform a port multiplier check even if the 1559 * comreset failed. This typically occurs when the PM has nothing 1560 * in slot 0, which can cause BSY to remain set. 1561 * 1562 * If the PM detection is successful it will override (error), 1563 * otherwise (error) is retained. If an error does occur it 1564 * is possible that a normal device has blown up on us DUE to 1565 * the PM detection code, so re-run the comreset and assume 1566 * a normal device. 1567 */ 1568 if (pmdetect) { 1569 if (ap->ap_sc->sc_cap & AHCI_REG_CAP_SPM) { 1570 error = ahci_pm_port_probe(ap, error); 1571 if (error) { 1572 error = ahci_comreset(ap, &pmdetect); 1573 } 1574 } 1575 } 1576 1577 /* 1578 * Finish up. 1579 */ 1580 ahci_os_sleep(500); 1581 1582 switch(error) { 1583 case 0: 1584 /* 1585 * All good, make sure the port is running and set the 1586 * probe state. Ignore the signature junk (it's unreliable) 1587 * until we get to the softreset code. 1588 */ 1589 if (ahci_port_start(ap)) { 1590 kprintf("%s: failed to start command DMA on port, " 1591 "disabling\n", PORTNAME(ap)); 1592 error = EBUSY; 1593 break; 1594 } 1595 if (ap->ap_type == ATA_PORT_T_PM) 1596 ap->ap_probe = ATA_PROBE_GOOD; 1597 else 1598 ap->ap_probe = ATA_PROBE_NEED_SOFT_RESET; 1599 break; 1600 case ENODEV: 1601 /* 1602 * Normal device probe failure 1603 */ 1604 data = ahci_pread(ap, AHCI_PREG_SSTS); 1605 1606 switch(data & AHCI_PREG_SSTS_DET) { 1607 case AHCI_PREG_SSTS_DET_DEV_NE: 1608 kprintf("%s: Device not communicating\n", 1609 PORTNAME(ap)); 1610 break; 1611 case AHCI_PREG_SSTS_DET_PHYOFFLINE: 1612 kprintf("%s: PHY offline\n", 1613 PORTNAME(ap)); 1614 break; 1615 default: 1616 kprintf("%s: No device detected\n", 1617 PORTNAME(ap)); 1618 break; 1619 } 1620 ahci_port_hardstop(ap); 1621 break; 1622 default: 1623 /* 1624 * Abnormal probe (EBUSY) 1625 */ 1626 kprintf("%s: Device on port is bricked\n", 1627 PORTNAME(ap)); 1628 ahci_port_hardstop(ap); 1629 #if 0 1630 rc = ahci_port_reset(ap, atx, 0); 1631 if (rc) { 1632 kprintf("%s: Unable unbrick device\n", 1633 PORTNAME(ap)); 1634 } else { 1635 kprintf("%s: Successfully unbricked\n", 1636 PORTNAME(ap)); 1637 } 1638 #endif 1639 break; 1640 } 1641 1642 /* 1643 * Clean up 1644 */ 1645 ahci_pwrite(ap, AHCI_PREG_SERR, -1); 1646 ahci_pwrite(ap, AHCI_PREG_IS, AHCI_PREG_IS_PCS | AHCI_PREG_IS_PRCS); 1647 1648 ap->ap_flags &= ~AP_F_IN_RESET; 1649 1650 if (bootverbose) 1651 kprintf("%s: END HARDRESET %d\n", PORTNAME(ap), error); 1652 return (error); 1653 } 1654 1655 /* 1656 * Hard-stop on hot-swap device removal. See 10.10.1 1657 * 1658 * Place the port in a mode that will allow it to detect hot-swap insertions. 1659 * This is a bit imprecise because just setting-up SCTL to DET_INIT doesn't 1660 * seem to do the job. 1661 * 1662 * FIS reception is left enabled but command processing is disabled. 1663 * Cycling FIS reception (FRE) can brick ports. 1664 */ 1665 void 1666 ahci_port_hardstop(struct ahci_port *ap) 1667 { 1668 struct ahci_ccb *ccb; 1669 struct ata_port *at; 1670 u_int32_t r; 1671 u_int32_t cmd; 1672 int slot; 1673 int i; 1674 int serial; 1675 1676 /* 1677 * Stop the port. We can't modify things like SUD if the port 1678 * is running. 1679 */ 1680 ap->ap_state = AP_S_FATAL_ERROR; 1681 ap->ap_probe = ATA_PROBE_FAILED; 1682 ap->ap_type = ATA_PORT_T_NONE; 1683 ahci_port_stop(ap, 0); 1684 cmd = ahci_pread(ap, AHCI_PREG_CMD); 1685 cmd &= ~(AHCI_PREG_CMD_CLO | AHCI_PREG_CMD_PMA | AHCI_PREG_CMD_ICC); 1686 ahci_pwrite(ap, AHCI_PREG_CMD, cmd); 1687 1688 /* 1689 * Clean up AT sub-ports on SATA port. 1690 */ 1691 for (i = 0; ap->ap_ata && i < AHCI_MAX_PMPORTS; ++i) { 1692 at = ap->ap_ata[i]; 1693 at->at_type = ATA_PORT_T_NONE; 1694 at->at_probe = ATA_PROBE_FAILED; 1695 } 1696 1697 /* 1698 * Make sure FRE is active. There isn't anything we can do if it 1699 * fails so just ignore errors. 1700 */ 1701 if ((cmd & AHCI_PREG_CMD_FRE) == 0) { 1702 cmd |= AHCI_PREG_CMD_FRE; 1703 ahci_pwrite(ap, AHCI_PREG_CMD, cmd); 1704 if ((ap->ap_sc->sc_flags & AHCI_F_IGN_FR) == 0) 1705 ahci_pwait_set(ap, AHCI_PREG_CMD, AHCI_PREG_CMD_FR); 1706 } 1707 1708 /* 1709 * 10.10.1 place us in the Listen state. 1710 * 1711 * 10.10.3 DET must be set to 0 and found to be 0 before 1712 * setting SUD to 0. 1713 * 1714 * Deactivating SUD only applies if the controller supports SUD, it 1715 * is a bit unclear what happens w/regards to detecting hotplug 1716 * if it doesn't. 1717 */ 1718 r = AHCI_PREG_SCTL_IPM_DISABLED | 1719 AHCI_PREG_SCTL_SPM_DISABLED; 1720 ahci_pwrite(ap, AHCI_PREG_SCTL, r); 1721 ahci_os_sleep(10); 1722 cmd &= ~AHCI_PREG_CMD_SUD; 1723 ahci_pwrite(ap, AHCI_PREG_CMD, cmd); 1724 ahci_os_sleep(10); 1725 1726 /* 1727 * 10.10.1 1728 * 1729 * Transition su to the spin-up state. HBA shall send COMRESET and 1730 * begin initialization sequence (whatever that means). Presumably 1731 * this is edge-triggered. Following the spin-up state the HBA 1732 * will automatically transition to the Normal state. 1733 * 1734 * This only applies if the controller supports SUD. 1735 * NEVER use AHCI_PREG_DET_DISABLE. 1736 */ 1737 cmd |= AHCI_PREG_CMD_POD | 1738 AHCI_PREG_CMD_SUD | 1739 AHCI_PREG_CMD_ICC_ACTIVE; 1740 ahci_pwrite(ap, AHCI_PREG_CMD, cmd); 1741 ahci_os_sleep(10); 1742 1743 /* 1744 * Flush SERR_DIAG_X so the TFD can update. 1745 */ 1746 ahci_flush_tfd(ap); 1747 1748 /* 1749 * Clean out pending ccbs 1750 */ 1751 restart: 1752 while (ap->ap_active) { 1753 slot = ffs(ap->ap_active) - 1; 1754 ap->ap_active &= ~(1 << slot); 1755 --ap->ap_active_cnt; 1756 ccb = &ap->ap_ccbs[slot]; 1757 if (ccb->ccb_xa.flags & ATA_F_TIMEOUT_RUNNING) { 1758 serial = ccb->ccb_xa.serial; 1759 callout_stop_sync(&ccb->ccb_timeout); 1760 if (serial != ccb->ccb_xa.serial) { 1761 kprintf("%s: Warning: timeout race ccb %p\n", 1762 PORTNAME(ap), ccb); 1763 goto restart; 1764 } 1765 ccb->ccb_xa.flags &= ~ATA_F_TIMEOUT_RUNNING; 1766 } 1767 ap->ap_expired &= ~(1 << slot); 1768 ccb->ccb_xa.flags &= ~(ATA_F_TIMEOUT_DESIRED | 1769 ATA_F_TIMEOUT_EXPIRED); 1770 ccb->ccb_xa.state = ATA_S_TIMEOUT; 1771 ccb->ccb_done(ccb); 1772 ccb->ccb_xa.complete(&ccb->ccb_xa); 1773 } 1774 while (ap->ap_sactive) { 1775 slot = ffs(ap->ap_sactive) - 1; 1776 ap->ap_sactive &= ~(1 << slot); 1777 ccb = &ap->ap_ccbs[slot]; 1778 if (ccb->ccb_xa.flags & ATA_F_TIMEOUT_RUNNING) { 1779 serial = ccb->ccb_xa.serial; 1780 callout_stop_sync(&ccb->ccb_timeout); 1781 if (serial != ccb->ccb_xa.serial) { 1782 kprintf("%s: Warning: timeout race ccb %p\n", 1783 PORTNAME(ap), ccb); 1784 goto restart; 1785 } 1786 ccb->ccb_xa.flags &= ~ATA_F_TIMEOUT_RUNNING; 1787 } 1788 ap->ap_expired &= ~(1 << slot); 1789 ccb->ccb_xa.flags &= ~(ATA_F_TIMEOUT_DESIRED | 1790 ATA_F_TIMEOUT_EXPIRED); 1791 ccb->ccb_xa.state = ATA_S_TIMEOUT; 1792 ccb->ccb_done(ccb); 1793 ccb->ccb_xa.complete(&ccb->ccb_xa); 1794 } 1795 KKASSERT(ap->ap_active_cnt == 0); 1796 1797 while ((ccb = TAILQ_FIRST(&ap->ap_ccb_pending)) != NULL) { 1798 TAILQ_REMOVE(&ap->ap_ccb_pending, ccb, ccb_entry); 1799 ccb->ccb_xa.state = ATA_S_TIMEOUT; 1800 ccb->ccb_xa.flags &= ~ATA_F_TIMEOUT_DESIRED; 1801 ccb->ccb_done(ccb); 1802 ccb->ccb_xa.complete(&ccb->ccb_xa); 1803 } 1804 1805 /* 1806 * Hot-plug device detection should work at this point. e.g. on 1807 * AMD chipsets Spin-Up/Normal state is sufficient for hot-plug 1808 * detection and entering RESET (continuous COMRESET by setting INIT) 1809 * will actually prevent hot-plug detection from working properly. 1810 * 1811 * There may be cases where this will fail to work, I have some 1812 * additional code to place the HBA in RESET (send continuous 1813 * COMRESET) and hopefully get DIAG.X or other events when something 1814 * is plugged in. Unfortunately this isn't universal and can 1815 * also prevent events from generating interrupts. 1816 */ 1817 1818 #if 0 1819 /* 1820 * Transition us to the Reset state. Theoretically we send a 1821 * continuous stream of COMRESETs in this state. 1822 */ 1823 r |= AHCI_PREG_SCTL_DET_INIT; 1824 if (AhciForceGen1 & (1 << ap->ap_num)) { 1825 kprintf("%s: Force 1.5Gbits\n", PORTNAME(ap)); 1826 r |= AHCI_PREG_SCTL_SPD_GEN1; 1827 } else { 1828 r |= AHCI_PREG_SCTL_SPD_ANY; 1829 } 1830 ahci_pwrite(ap, AHCI_PREG_SCTL, r); 1831 ahci_os_sleep(10); 1832 1833 /* 1834 * Flush SERR_DIAG_X so the TFD can update. 1835 */ 1836 ahci_flush_tfd(ap); 1837 #endif 1838 /* NOP */ 1839 } 1840 1841 /* 1842 * We can't loop on the X bit, a continuous COMINIT received will make 1843 * it loop forever. Just assume one event has built up and clear X 1844 * so the task file descriptor can update. 1845 */ 1846 void 1847 ahci_flush_tfd(struct ahci_port *ap) 1848 { 1849 u_int32_t r; 1850 1851 r = ahci_pread(ap, AHCI_PREG_SERR); 1852 if (r & AHCI_PREG_SERR_DIAG_X) 1853 ahci_pwrite(ap, AHCI_PREG_SERR, AHCI_PREG_SERR_DIAG_X); 1854 } 1855 1856 /* 1857 * Figure out what type of device is connected to the port, ATAPI or 1858 * DISK. 1859 */ 1860 int 1861 ahci_port_signature_detect(struct ahci_port *ap, struct ata_port *at) 1862 { 1863 u_int32_t sig; 1864 1865 sig = ahci_pread(ap, AHCI_PREG_SIG); 1866 if (bootverbose) 1867 kprintf("%s: sig %08x\n", ATANAME(ap, at), sig); 1868 if ((sig & 0xffff0000) == (SATA_SIGNATURE_ATAPI & 0xffff0000)) { 1869 return(ATA_PORT_T_ATAPI); 1870 } else if ((sig & 0xffff0000) == 1871 (SATA_SIGNATURE_PORT_MULTIPLIER & 0xffff0000)) { 1872 return(ATA_PORT_T_PM); 1873 } else { 1874 return(ATA_PORT_T_DISK); 1875 } 1876 } 1877 1878 /* 1879 * Load the DMA descriptor table for a CCB's buffer. 1880 */ 1881 int 1882 ahci_load_prdt(struct ahci_ccb *ccb) 1883 { 1884 struct ahci_port *ap = ccb->ccb_port; 1885 struct ahci_softc *sc = ap->ap_sc; 1886 struct ata_xfer *xa = &ccb->ccb_xa; 1887 struct ahci_prdt *prdt = ccb->ccb_cmd_table->prdt; 1888 bus_dmamap_t dmap = ccb->ccb_dmamap; 1889 struct ahci_cmd_hdr *cmd_slot = ccb->ccb_cmd_hdr; 1890 int error; 1891 1892 if (xa->datalen == 0) { 1893 ccb->ccb_cmd_hdr->prdtl = 0; 1894 return (0); 1895 } 1896 1897 error = bus_dmamap_load(sc->sc_tag_data, dmap, 1898 xa->data, xa->datalen, 1899 ahci_load_prdt_callback, 1900 &prdt, 1901 ((xa->flags & ATA_F_NOWAIT) ? 1902 BUS_DMA_NOWAIT : BUS_DMA_WAITOK)); 1903 if (error != 0) { 1904 kprintf("%s: error %d loading dmamap\n", PORTNAME(ap), error); 1905 return (1); 1906 } 1907 #if 0 1908 if (xa->flags & ATA_F_PIO) 1909 prdt->flags |= htole32(AHCI_PRDT_FLAG_INTR); 1910 #endif 1911 1912 cmd_slot->prdtl = htole16(prdt - ccb->ccb_cmd_table->prdt + 1); 1913 1914 if (xa->flags & ATA_F_READ) 1915 bus_dmamap_sync(sc->sc_tag_data, dmap, BUS_DMASYNC_PREREAD); 1916 if (xa->flags & ATA_F_WRITE) 1917 bus_dmamap_sync(sc->sc_tag_data, dmap, BUS_DMASYNC_PREWRITE); 1918 1919 return (0); 1920 } 1921 1922 /* 1923 * Callback from BUSDMA system to load the segment list. The passed segment 1924 * list is a temporary structure. 1925 */ 1926 static 1927 void 1928 ahci_load_prdt_callback(void *info, bus_dma_segment_t *segs, int nsegs, 1929 int error) 1930 { 1931 struct ahci_prdt *prd = *(void **)info; 1932 u_int64_t addr; 1933 1934 KKASSERT(nsegs <= AHCI_MAX_PRDT); 1935 1936 while (nsegs) { 1937 addr = segs->ds_addr; 1938 prd->dba_hi = htole32((u_int32_t)(addr >> 32)); 1939 prd->dba_lo = htole32((u_int32_t)addr); 1940 prd->flags = htole32(segs->ds_len - 1); 1941 --nsegs; 1942 if (nsegs) 1943 ++prd; 1944 ++segs; 1945 } 1946 *(void **)info = prd; /* return last valid segment */ 1947 } 1948 1949 void 1950 ahci_unload_prdt(struct ahci_ccb *ccb) 1951 { 1952 struct ahci_port *ap = ccb->ccb_port; 1953 struct ahci_softc *sc = ap->ap_sc; 1954 struct ata_xfer *xa = &ccb->ccb_xa; 1955 bus_dmamap_t dmap = ccb->ccb_dmamap; 1956 1957 if (xa->datalen != 0) { 1958 if (xa->flags & ATA_F_READ) { 1959 bus_dmamap_sync(sc->sc_tag_data, dmap, 1960 BUS_DMASYNC_POSTREAD); 1961 } 1962 if (xa->flags & ATA_F_WRITE) { 1963 bus_dmamap_sync(sc->sc_tag_data, dmap, 1964 BUS_DMASYNC_POSTWRITE); 1965 } 1966 bus_dmamap_unload(sc->sc_tag_data, dmap); 1967 1968 /* 1969 * prdbc is only updated by hardware for non-NCQ commands. 1970 */ 1971 if (ccb->ccb_xa.flags & ATA_F_NCQ) { 1972 xa->resid = 0; 1973 } else { 1974 if (ccb->ccb_cmd_hdr->prdbc == 0 && 1975 ccb->ccb_xa.state == ATA_S_COMPLETE) { 1976 kprintf("%s: WARNING! Unload prdbc resid " 1977 "was zero! tag=%d\n", 1978 ATANAME(ap, xa->at), ccb->ccb_slot); 1979 } 1980 xa->resid = xa->datalen - 1981 le32toh(ccb->ccb_cmd_hdr->prdbc); 1982 } 1983 } 1984 } 1985 1986 /* 1987 * Start a command and poll for completion. 1988 * 1989 * timeout is in ms and only counts once the command gets on-chip. 1990 * 1991 * Returns ATA_S_* state, compare against ATA_S_COMPLETE to determine 1992 * that no error occured. 1993 * 1994 * NOTE: If the caller specifies a NULL timeout function the caller is 1995 * responsible for clearing hardware state on failure, but we will 1996 * deal with removing the ccb from any pending queue. 1997 * 1998 * NOTE: NCQ should never be used with this function. 1999 * 2000 * NOTE: If the port is in a failed state and stopped we do not try 2001 * to activate the ccb. 2002 */ 2003 int 2004 ahci_poll(struct ahci_ccb *ccb, int timeout, 2005 void (*timeout_fn)(struct ahci_ccb *)) 2006 { 2007 struct ahci_port *ap = ccb->ccb_port; 2008 2009 if (ccb->ccb_port->ap_state == AP_S_FATAL_ERROR) { 2010 ccb->ccb_xa.state = ATA_S_ERROR; 2011 return(ccb->ccb_xa.state); 2012 } 2013 crit_enter(); 2014 #if 0 2015 kprintf("%s: Start command %02x tag=%d\n", 2016 ATANAME(ccb->ccb_port, ccb->ccb_xa.at), 2017 ccb->ccb_xa.fis->command, ccb->ccb_slot); 2018 #endif 2019 ahci_start(ccb); 2020 2021 do { 2022 ahci_port_intr(ap, 1); 2023 switch(ccb->ccb_xa.state) { 2024 case ATA_S_ONCHIP: 2025 timeout -= ahci_os_softsleep(); 2026 break; 2027 case ATA_S_PENDING: 2028 ahci_os_softsleep(); 2029 ahci_check_active_timeouts(ap); 2030 break; 2031 default: 2032 crit_exit(); 2033 return (ccb->ccb_xa.state); 2034 } 2035 } while (timeout > 0); 2036 2037 if ((ccb->ccb_xa.flags & ATA_F_SILENT) == 0) { 2038 kprintf("%s: Poll timeout slot %d CMD: %b TFD: 0x%b SERR: %b\n", 2039 ATANAME(ap, ccb->ccb_xa.at), ccb->ccb_slot, 2040 ahci_pread(ap, AHCI_PREG_CMD), AHCI_PFMT_CMD, 2041 ahci_pread(ap, AHCI_PREG_TFD), AHCI_PFMT_TFD_STS, 2042 ahci_pread(ap, AHCI_PREG_SERR), AHCI_PFMT_SERR); 2043 } 2044 2045 timeout_fn(ccb); 2046 2047 crit_exit(); 2048 2049 return(ccb->ccb_xa.state); 2050 } 2051 2052 /* 2053 * When polling we have to check if the currently active CCB(s) 2054 * have timed out as the callout will be deadlocked while we 2055 * hold the port lock. 2056 */ 2057 void 2058 ahci_check_active_timeouts(struct ahci_port *ap) 2059 { 2060 struct ahci_ccb *ccb; 2061 u_int32_t mask; 2062 int tag; 2063 2064 mask = ap->ap_active | ap->ap_sactive; 2065 while (mask) { 2066 tag = ffs(mask) - 1; 2067 mask &= ~(1 << tag); 2068 ccb = &ap->ap_ccbs[tag]; 2069 if (ccb->ccb_xa.flags & ATA_F_TIMEOUT_EXPIRED) { 2070 ahci_ata_cmd_timeout(ccb); 2071 } 2072 } 2073 } 2074 2075 static 2076 __inline 2077 void 2078 ahci_start_timeout(struct ahci_ccb *ccb) 2079 { 2080 if (ccb->ccb_xa.flags & ATA_F_TIMEOUT_DESIRED) { 2081 ccb->ccb_xa.flags |= ATA_F_TIMEOUT_RUNNING; 2082 callout_reset(&ccb->ccb_timeout, 2083 (ccb->ccb_xa.timeout * hz + 999) / 1000, 2084 ahci_ata_cmd_timeout_unserialized, ccb); 2085 } 2086 } 2087 2088 void 2089 ahci_start(struct ahci_ccb *ccb) 2090 { 2091 struct ahci_port *ap = ccb->ccb_port; 2092 struct ahci_softc *sc = ap->ap_sc; 2093 2094 KKASSERT(ccb->ccb_xa.state == ATA_S_PENDING); 2095 2096 /* Zero transferred byte count before transfer */ 2097 ccb->ccb_cmd_hdr->prdbc = 0; 2098 2099 /* Sync command list entry and corresponding command table entry */ 2100 bus_dmamap_sync(sc->sc_tag_cmdh, 2101 AHCI_DMA_MAP(ap->ap_dmamem_cmd_list), 2102 BUS_DMASYNC_PREWRITE); 2103 bus_dmamap_sync(sc->sc_tag_cmdt, 2104 AHCI_DMA_MAP(ap->ap_dmamem_cmd_table), 2105 BUS_DMASYNC_PREWRITE); 2106 2107 /* Prepare RFIS area for write by controller */ 2108 bus_dmamap_sync(sc->sc_tag_rfis, 2109 AHCI_DMA_MAP(ap->ap_dmamem_rfis), 2110 BUS_DMASYNC_PREREAD); 2111 2112 /* 2113 * There's no point trying to optimize this, it only shaves a few 2114 * nanoseconds so just queue the command and call our generic issue. 2115 */ 2116 ahci_issue_pending_commands(ap, ccb); 2117 } 2118 2119 /* 2120 * While holding the port lock acquire exclusive access to the port. 2121 * 2122 * This is used when running the state machine to initialize and identify 2123 * targets over a port multiplier. Setting exclusive access prevents 2124 * ahci_port_intr() from activating any requests sitting on the pending 2125 * queue. 2126 */ 2127 void 2128 ahci_beg_exclusive_access(struct ahci_port *ap, struct ata_port *at) 2129 { 2130 KKASSERT((ap->ap_flags & AP_F_EXCLUSIVE_ACCESS) == 0); 2131 ap->ap_flags |= AP_F_EXCLUSIVE_ACCESS; 2132 while (ap->ap_active || ap->ap_sactive) { 2133 ahci_port_intr(ap, 1); 2134 ahci_os_softsleep(); 2135 } 2136 } 2137 2138 void 2139 ahci_end_exclusive_access(struct ahci_port *ap, struct ata_port *at) 2140 { 2141 KKASSERT((ap->ap_flags & AP_F_EXCLUSIVE_ACCESS) != 0); 2142 ap->ap_flags &= ~AP_F_EXCLUSIVE_ACCESS; 2143 ahci_issue_pending_commands(ap, NULL); 2144 } 2145 2146 #if 0 2147 2148 static void 2149 fubar(struct ahci_ccb *ccb) 2150 { 2151 struct ahci_port *ap = ccb->ccb_port; 2152 struct ahci_cmd_hdr *cmd; 2153 struct ahci_cmd_table *tab; 2154 struct ahci_prdt *prdt; 2155 int i; 2156 2157 kprintf("%s: ISSUE %02x\n", 2158 ATANAME(ap, ccb->ccb_xa.at), 2159 ccb->ccb_xa.fis->command); 2160 cmd = ccb->ccb_cmd_hdr; 2161 tab = ccb->ccb_cmd_table; 2162 prdt = ccb->ccb_cmd_table->prdt; 2163 kprintf("cmd flags=%04x prdtl=%d prdbc=%d ctba=%08x%08x\n", 2164 cmd->flags, cmd->prdtl, cmd->prdbc, 2165 cmd->ctba_hi, cmd->ctba_lo); 2166 for (i = 0; i < cmd->prdtl; ++i) { 2167 kprintf("\t%d dba=%08x%08x res=%08x flags=%08x\n", 2168 i, prdt->dba_hi, prdt->dba_lo, prdt->reserved, 2169 prdt->flags); 2170 } 2171 kprintf("tab\n"); 2172 } 2173 2174 #endif 2175 2176 /* 2177 * If ccb is not NULL enqueue and/or issue it. 2178 * 2179 * If ccb is NULL issue whatever we can from the queue. However, nothing 2180 * new is issued if the exclusive access flag is set or expired ccb's are 2181 * present. 2182 * 2183 * If existing commands are still active (ap_active/ap_sactive) we can only 2184 * issue matching new commands. 2185 */ 2186 void 2187 ahci_issue_pending_commands(struct ahci_port *ap, struct ahci_ccb *ccb) 2188 { 2189 u_int32_t mask; 2190 int limit; 2191 2192 /* 2193 * Enqueue the ccb. 2194 * 2195 * If just running the queue and in exclusive access mode we 2196 * just return. Also in this case if there are any expired ccb's 2197 * we want to clear the queue so the port can be safely stopped. 2198 */ 2199 if (ccb) { 2200 TAILQ_INSERT_TAIL(&ap->ap_ccb_pending, ccb, ccb_entry); 2201 } else if ((ap->ap_flags & AP_F_EXCLUSIVE_ACCESS) || ap->ap_expired) { 2202 return; 2203 } 2204 2205 /* 2206 * Pull the next ccb off the queue and run it if possible. 2207 */ 2208 if ((ccb = TAILQ_FIRST(&ap->ap_ccb_pending)) == NULL) 2209 return; 2210 2211 /* 2212 * Handle exclusivity requirements. 2213 * 2214 * ATA_F_EXCLUSIVE is used when we want to be the only command 2215 * running. 2216 * 2217 * ATA_F_AUTOSENSE is used when we want the D2H rfis loaded 2218 * back into the ccb on a normal (non-errored) command completion. 2219 * For example, for PM requests to target 15. Because the AHCI 2220 * spec does not stop the command processor and has only one rfis 2221 * area (for non-FBSS anyway), AUTOSENSE currently implies EXCLUSIVE. 2222 * Otherwise multiple completions can destroy the rfis data before 2223 * we have a chance to copy it. 2224 */ 2225 if (ap->ap_active & ~ap->ap_expired) { 2226 /* 2227 * There may be multiple ccb's already running, 2228 * if any are running and ap_run_flags sets 2229 * one of these flags then we know only one is 2230 * running. 2231 * 2232 * XXX Current AUTOSENSE code forces exclusivity 2233 * to simplify the code. 2234 */ 2235 if (ap->ap_run_flags & 2236 (ATA_F_EXCLUSIVE | ATA_F_AUTOSENSE)) { 2237 return; 2238 } 2239 2240 if (ccb->ccb_xa.flags & 2241 (ATA_F_EXCLUSIVE | ATA_F_AUTOSENSE)) { 2242 return; 2243 } 2244 } 2245 2246 if (ccb->ccb_xa.flags & ATA_F_NCQ) { 2247 /* 2248 * The next command is a NCQ command and can be issued as 2249 * long as currently active commands are not standard. 2250 */ 2251 if (ap->ap_active) { 2252 KKASSERT(ap->ap_active_cnt > 0); 2253 return; 2254 } 2255 KKASSERT(ap->ap_active_cnt == 0); 2256 2257 mask = 0; 2258 do { 2259 TAILQ_REMOVE(&ap->ap_ccb_pending, ccb, ccb_entry); 2260 mask |= 1 << ccb->ccb_slot; 2261 ccb->ccb_xa.state = ATA_S_ONCHIP; 2262 ahci_start_timeout(ccb); 2263 ap->ap_run_flags = ccb->ccb_xa.flags; 2264 ccb = TAILQ_FIRST(&ap->ap_ccb_pending); 2265 } while (ccb && (ccb->ccb_xa.flags & ATA_F_NCQ) && 2266 (ap->ap_run_flags & 2267 (ATA_F_EXCLUSIVE | ATA_F_AUTOSENSE)) == 0); 2268 2269 ap->ap_sactive |= mask; 2270 ahci_pwrite(ap, AHCI_PREG_SACT, mask); 2271 ahci_pwrite(ap, AHCI_PREG_CI, mask); 2272 } else { 2273 /* 2274 * The next command is a standard command and can be issued 2275 * as long as currently active commands are not NCQ. 2276 * 2277 * We limit ourself to 1 command if we have a port multiplier, 2278 * (at least without FBSS support), otherwise timeouts on 2279 * one port can race completions on other ports (see 2280 * ahci_ata_cmd_timeout() for more information). 2281 * 2282 * If not on a port multiplier generally allow up to 4 2283 * standard commands to be enqueued. Remember that the 2284 * command processor will still process them sequentially. 2285 */ 2286 if (ap->ap_sactive) 2287 return; 2288 if (ap->ap_type == ATA_PORT_T_PM) 2289 limit = 1; 2290 else if (ap->ap_sc->sc_ncmds > 4) 2291 limit = 4; 2292 else 2293 limit = 2; 2294 2295 while (ap->ap_active_cnt < limit && ccb && 2296 (ccb->ccb_xa.flags & ATA_F_NCQ) == 0) { 2297 TAILQ_REMOVE(&ap->ap_ccb_pending, ccb, ccb_entry); 2298 #if 0 2299 fubar(ccb); 2300 #endif 2301 ap->ap_active |= 1 << ccb->ccb_slot; 2302 ap->ap_active_cnt++; 2303 ap->ap_run_flags = ccb->ccb_xa.flags; 2304 ccb->ccb_xa.state = ATA_S_ONCHIP; 2305 ahci_pwrite(ap, AHCI_PREG_CI, 1 << ccb->ccb_slot); 2306 ahci_start_timeout(ccb); 2307 if ((ap->ap_run_flags & 2308 (ATA_F_EXCLUSIVE | ATA_F_AUTOSENSE)) == 0) { 2309 break; 2310 } 2311 ccb = TAILQ_FIRST(&ap->ap_ccb_pending); 2312 if (ccb && (ccb->ccb_xa.flags & 2313 (ATA_F_EXCLUSIVE | ATA_F_AUTOSENSE))) { 2314 break; 2315 } 2316 } 2317 } 2318 } 2319 2320 void 2321 ahci_intr(void *arg) 2322 { 2323 struct ahci_softc *sc = arg; 2324 struct ahci_port *ap; 2325 u_int32_t is; 2326 u_int32_t ack; 2327 int port; 2328 2329 /* 2330 * Check if the master enable is up, and whether any interrupts are 2331 * pending. 2332 */ 2333 if ((sc->sc_flags & AHCI_F_INT_GOOD) == 0) 2334 return; 2335 is = ahci_read(sc, AHCI_REG_IS); 2336 if (is == 0 || is == 0xffffffff) { 2337 return; 2338 } 2339 is &= sc->sc_portmask; 2340 2341 #ifdef AHCI_COALESCE 2342 /* Check coalescing interrupt first */ 2343 if (is & sc->sc_ccc_mask) { 2344 DPRINTF(AHCI_D_INTR, "%s: command coalescing interrupt\n", 2345 DEVNAME(sc)); 2346 is &= ~sc->sc_ccc_mask; 2347 is |= sc->sc_ccc_ports_cur; 2348 } 2349 #endif 2350 2351 /* 2352 * Process interrupts for each port in a non-blocking fashion. 2353 * 2354 * The global IS bit is forced on if any unmasked port interrupts 2355 * are pending, even if we clear. 2356 */ 2357 for (ack = 0; is; is &= ~(1 << port)) { 2358 port = ffs(is) - 1; 2359 ack |= 1 << port; 2360 2361 ap = sc->sc_ports[port]; 2362 if (ap == NULL) 2363 continue; 2364 2365 if (ahci_os_lock_port_nb(ap) == 0) { 2366 ahci_port_intr(ap, 0); 2367 ahci_os_unlock_port(ap); 2368 } else { 2369 ahci_pwrite(ap, AHCI_PREG_IE, 0); 2370 ahci_os_signal_port_thread(ap, AP_SIGF_PORTINT); 2371 } 2372 } 2373 ahci_write(sc, AHCI_REG_IS, ack); 2374 } 2375 2376 /* 2377 * Core called from helper thread. 2378 */ 2379 void 2380 ahci_port_thread_core(struct ahci_port *ap, int mask) 2381 { 2382 /* 2383 * Process any expired timedouts. 2384 */ 2385 ahci_os_lock_port(ap); 2386 if (mask & AP_SIGF_TIMEOUT) { 2387 ahci_check_active_timeouts(ap); 2388 } 2389 2390 /* 2391 * Process port interrupts which require a higher level of 2392 * intervention. 2393 */ 2394 if (mask & AP_SIGF_PORTINT) { 2395 ahci_port_intr(ap, 1); 2396 ahci_port_interrupt_enable(ap); 2397 ahci_os_unlock_port(ap); 2398 } else if (ap->ap_probe != ATA_PROBE_FAILED) { 2399 ahci_port_intr(ap, 1); 2400 ahci_port_interrupt_enable(ap); 2401 ahci_os_unlock_port(ap); 2402 } else { 2403 ahci_os_unlock_port(ap); 2404 } 2405 } 2406 2407 /* 2408 * Core per-port interrupt handler. 2409 * 2410 * If blockable is 0 we cannot call ahci_os_sleep() at all and we can only 2411 * deal with normal command completions which do not require blocking. 2412 */ 2413 void 2414 ahci_port_intr(struct ahci_port *ap, int blockable) 2415 { 2416 struct ahci_softc *sc = ap->ap_sc; 2417 u_int32_t is, ci_saved, ci_masked; 2418 int slot; 2419 int stopped = 0; 2420 struct ahci_ccb *ccb = NULL; 2421 struct ata_port *ccb_at = NULL; 2422 volatile u_int32_t *active; 2423 const u_int32_t blockable_mask = AHCI_PREG_IS_TFES | 2424 AHCI_PREG_IS_IFS | 2425 AHCI_PREG_IS_PCS | 2426 AHCI_PREG_IS_PRCS | 2427 AHCI_PREG_IS_HBFS | 2428 AHCI_PREG_IS_OFS | 2429 AHCI_PREG_IS_UFS; 2430 2431 enum { NEED_NOTHING, NEED_REINIT, NEED_RESTART, 2432 NEED_HOTPLUG_INSERT, NEED_HOTPLUG_REMOVE } need = NEED_NOTHING; 2433 2434 /* 2435 * All basic command completions are always processed. 2436 */ 2437 is = ahci_pread(ap, AHCI_PREG_IS); 2438 if (is & AHCI_PREG_IS_DPS) 2439 ahci_pwrite(ap, AHCI_PREG_IS, is & AHCI_PREG_IS_DPS); 2440 2441 /* 2442 * If we can't block then we can't handle these here. Disable 2443 * the interrupts in question so we don't live-lock, the helper 2444 * thread will re-enable them. 2445 * 2446 * If the port is in a completely failed state we do not want 2447 * to drop through to failed-command-processing if blockable is 0, 2448 * just let the thread deal with it all. 2449 * 2450 * Otherwise we fall through and still handle DHRS and any commands 2451 * which completed normally. Even if we are errored we haven't 2452 * stopped the port yet so CI/SACT are still good. 2453 */ 2454 if (blockable == 0) { 2455 if (ap->ap_state == AP_S_FATAL_ERROR) { 2456 ahci_pwrite(ap, AHCI_PREG_IE, 0); 2457 ahci_os_signal_port_thread(ap, AP_SIGF_PORTINT); 2458 return; 2459 } 2460 if (is & blockable_mask) { 2461 ahci_pwrite(ap, AHCI_PREG_IE, 0); 2462 ahci_os_signal_port_thread(ap, AP_SIGF_PORTINT); 2463 return; 2464 } 2465 } 2466 2467 /* 2468 * Either NCQ or non-NCQ commands will be active, never both. 2469 */ 2470 if (ap->ap_sactive) { 2471 KKASSERT(ap->ap_active == 0); 2472 KKASSERT(ap->ap_active_cnt == 0); 2473 ci_saved = ahci_pread(ap, AHCI_PREG_SACT); 2474 active = &ap->ap_sactive; 2475 } else { 2476 ci_saved = ahci_pread(ap, AHCI_PREG_CI); 2477 active = &ap->ap_active; 2478 } 2479 KKASSERT(!(ap->ap_sactive && ap->ap_active)); 2480 #if 0 2481 kprintf("CHECK act=%08x/%08x sact=%08x/%08x\n", 2482 ap->ap_active, ahci_pread(ap, AHCI_PREG_CI), 2483 ap->ap_sactive, ahci_pread(ap, AHCI_PREG_SACT)); 2484 #endif 2485 2486 /* 2487 * Ignore AHCI_PREG_IS_PRCS when link power management is on 2488 */ 2489 if (ap->link_pwr_mgmt != AHCI_LINK_PWR_MGMT_NONE) { 2490 is &= ~AHCI_PREG_IS_PRCS; 2491 ahci_pwrite(ap, AHCI_PREG_SERR, 2492 AHCI_PREG_SERR_DIAG_N | AHCI_PREG_SERR_DIAG_W); 2493 } 2494 2495 /* 2496 * Command failed (blockable). 2497 * 2498 * See AHCI 1.1 spec 6.2.2.1 and 6.2.2.2. 2499 * 2500 * This stops command processing. 2501 */ 2502 if (is & AHCI_PREG_IS_TFES) { 2503 u_int32_t tfd, serr; 2504 int err_slot; 2505 2506 process_error: 2507 tfd = ahci_pread(ap, AHCI_PREG_TFD); 2508 serr = ahci_pread(ap, AHCI_PREG_SERR); 2509 2510 /* 2511 * Load the error slot and restart command processing. 2512 * CLO if we need to. The error slot may not be valid. 2513 * MUST BE DONE BEFORE CLEARING ST! 2514 * 2515 * Cycle ST. 2516 * 2517 * It is unclear but we may have to clear SERR to reenable 2518 * error processing. 2519 */ 2520 err_slot = AHCI_PREG_CMD_CCS(ahci_pread(ap, AHCI_PREG_CMD)); 2521 ahci_pwrite(ap, AHCI_PREG_IS, AHCI_PREG_IS_TFES | 2522 AHCI_PREG_IS_PSS | 2523 AHCI_PREG_IS_DHRS | 2524 AHCI_PREG_IS_SDBS); 2525 is &= ~(AHCI_PREG_IS_TFES | AHCI_PREG_IS_PSS | 2526 AHCI_PREG_IS_DHRS | AHCI_PREG_IS_SDBS); 2527 ahci_pwrite(ap, AHCI_PREG_SERR, serr); 2528 ahci_port_stop(ap, 0); 2529 ahci_os_hardsleep(10); 2530 if (tfd & (AHCI_PREG_TFD_STS_BSY | AHCI_PREG_TFD_STS_DRQ)) { 2531 kprintf("%s: Issuing CLO\n", PORTNAME(ap)); 2532 ahci_port_clo(ap); 2533 } 2534 2535 /* 2536 * We are now stopped and need a restart. If we have to 2537 * process a NCQ error we will temporarily start and then 2538 * stop the port again, so this condition holds. 2539 */ 2540 stopped = 1; 2541 need = NEED_RESTART; 2542 2543 /* 2544 * ATAPI errors are fairly common from probing, just 2545 * report disk errors or if bootverbose is on. 2546 */ 2547 if (bootverbose || ap->ap_type != ATA_PORT_T_ATAPI) { 2548 kprintf("%s: TFES slot %d ci_saved = %08x\n", 2549 PORTNAME(ap), err_slot, ci_saved); 2550 } 2551 2552 /* 2553 * If we got an error on an error CCB just complete it 2554 * with an error. ci_saved has the mask to restart 2555 * (the err_ccb will be removed from it by finish_error). 2556 */ 2557 if (ap->ap_flags & AP_F_ERR_CCB_RESERVED) { 2558 err_slot = ap->ap_err_ccb->ccb_slot; 2559 goto finish_error; 2560 } 2561 2562 /* 2563 * If NCQ commands were active get the error slot from 2564 * the log page. NCQ is not supported for PM's so this 2565 * is a direct-attached target. 2566 * 2567 * Otherwise if no commands were active we have a problem. 2568 * 2569 * Otherwise if the error slot is bad we have a problem. 2570 * 2571 * Otherwise process the error for the slot. 2572 */ 2573 if (ap->ap_sactive) { 2574 ahci_port_start(ap); 2575 err_slot = ahci_port_read_ncq_error(ap, 0); 2576 ahci_port_stop(ap, 0); 2577 } else if (ap->ap_active == 0) { 2578 kprintf("%s: TFES with no commands pending\n", 2579 PORTNAME(ap)); 2580 err_slot = -1; 2581 } else if (err_slot < 0 || err_slot >= ap->ap_sc->sc_ncmds) { 2582 kprintf("%s: bad error slot %d\n", 2583 PORTNAME(ap), err_slot); 2584 err_slot = -1; 2585 } else { 2586 ccb = &ap->ap_ccbs[err_slot]; 2587 2588 /* 2589 * Validate the errored ccb. Note that ccb_at can 2590 * be NULL for direct-attached ccb's. 2591 * 2592 * Copy received taskfile data from the RFIS. 2593 */ 2594 if (ccb->ccb_xa.state == ATA_S_ONCHIP) { 2595 ccb_at = ccb->ccb_xa.at; 2596 memcpy(&ccb->ccb_xa.rfis, ap->ap_rfis->rfis, 2597 sizeof(struct ata_fis_d2h)); 2598 if (bootverbose) { 2599 kprintf("%s: Copying rfis slot %d\n", 2600 ATANAME(ap, ccb_at), err_slot); 2601 } 2602 } else { 2603 kprintf("%s: Cannot copy rfis, CCB slot " 2604 "%d is not on-chip (state=%d)\n", 2605 ATANAME(ap, ccb->ccb_xa.at), 2606 err_slot, ccb->ccb_xa.state); 2607 err_slot = -1; 2608 } 2609 } 2610 2611 /* 2612 * If we could not determine the errored slot then 2613 * reset the port. 2614 */ 2615 if (err_slot < 0) { 2616 kprintf("%s: TFES: Unable to determine errored slot\n", 2617 PORTNAME(ap)); 2618 if (ap->ap_flags & AP_F_IN_RESET) 2619 goto fatal; 2620 goto failall; 2621 } 2622 2623 /* 2624 * Finish error on slot. We will restart ci_saved 2625 * commands except the errored slot which we generate 2626 * a failure for. 2627 */ 2628 finish_error: 2629 ccb = &ap->ap_ccbs[err_slot]; 2630 ci_saved &= ~(1 << err_slot); 2631 KKASSERT(ccb->ccb_xa.state == ATA_S_ONCHIP); 2632 ccb->ccb_xa.state = ATA_S_ERROR; 2633 } else if (is & AHCI_PREG_IS_DHRS) { 2634 /* 2635 * Command posted D2H register FIS to the rfis (non-blocking). 2636 * 2637 * A normal completion with an error may set DHRS instead 2638 * of TFES. The CCS bits are only valid if ERR was set. 2639 * If ERR is set command processing was probably stopped. 2640 * 2641 * If ERR was not set we can only copy-back data for 2642 * exclusive-mode commands because otherwise we won't know 2643 * which tag the rfis belonged to. 2644 * 2645 * err_slot must be read from the CCS before any other port 2646 * action, such as stopping the port. 2647 * 2648 * WARNING! This is not well documented in the AHCI spec. 2649 * It can be found in the state machine tables 2650 * but not in the explanations. 2651 */ 2652 u_int32_t tfd; 2653 u_int32_t cmd; 2654 int err_slot; 2655 2656 tfd = ahci_pread(ap, AHCI_PREG_TFD); 2657 cmd = ahci_pread(ap, AHCI_PREG_CMD); 2658 2659 if ((tfd & AHCI_PREG_TFD_STS_ERR) && 2660 (cmd & AHCI_PREG_CMD_CR) == 0) { 2661 err_slot = AHCI_PREG_CMD_CCS( 2662 ahci_pread(ap, AHCI_PREG_CMD)); 2663 ccb = &ap->ap_ccbs[err_slot]; 2664 kprintf("%s: DHRS tfd=%b err_slot=%d cmd=%02x\n", 2665 PORTNAME(ap), 2666 tfd, AHCI_PFMT_TFD_STS, 2667 err_slot, ccb->ccb_xa.fis->command); 2668 goto process_error; 2669 } 2670 /* 2671 * NO ELSE... copy back is in the normal command completion 2672 * code and only if no error occured and ATA_F_AUTOSENSE 2673 * was set. 2674 */ 2675 ahci_pwrite(ap, AHCI_PREG_IS, AHCI_PREG_IS_DHRS); 2676 } 2677 2678 /* 2679 * Device notification to us (non-blocking) 2680 * 2681 * NOTE! On some parts notification bits can cause an IPMS 2682 * interrupt instead of a SDBS interrupt. 2683 * 2684 * NOTE! On some parts (e.g. VBOX, probably intel ICHx), 2685 * SDBS notifies us of the completion of a NCQ command 2686 * and DBS does not. 2687 */ 2688 if (is & (AHCI_PREG_IS_SDBS | AHCI_PREG_IS_IPMS)) { 2689 u_int32_t data; 2690 2691 ahci_pwrite(ap, AHCI_PREG_IS, 2692 AHCI_PREG_IS_SDBS | AHCI_PREG_IS_IPMS); 2693 if (sc->sc_cap & AHCI_REG_CAP_SSNTF) { 2694 data = ahci_pread(ap, AHCI_PREG_SNTF); 2695 if (data) { 2696 ahci_pwrite(ap, AHCI_PREG_IS, 2697 AHCI_PREG_IS_SDBS); 2698 kprintf("%s: NOTIFY %08x\n", 2699 PORTNAME(ap), data); 2700 ahci_pwrite(ap, AHCI_PREG_SERR, 2701 AHCI_PREG_SERR_DIAG_N); 2702 ahci_pwrite(ap, AHCI_PREG_SNTF, data); 2703 ahci_cam_changed(ap, NULL, -1); 2704 } 2705 } 2706 is &= ~(AHCI_PREG_IS_SDBS | AHCI_PREG_IS_IPMS); 2707 } 2708 2709 /* 2710 * Spurious IFS errors (blockable) - when AP_F_IGNORE_IFS is set. 2711 * 2712 * Spurious IFS errors can occur while we are doing a reset 2713 * sequence through a PM, probably due to an unexpected FIS 2714 * being received during the PM target reset sequence. Chipsets 2715 * are supposed to mask these events but some do not. 2716 * 2717 * Try to recover from the condition. 2718 */ 2719 if ((is & AHCI_PREG_IS_IFS) && (ap->ap_flags & AP_F_IGNORE_IFS)) { 2720 u_int32_t serr = ahci_pread(ap, AHCI_PREG_SERR); 2721 if ((ap->ap_flags & AP_F_IFS_IGNORED) == 0) { 2722 kprintf("%s: IFS during PM probe (ignored) " 2723 "IS=%b, SERR=%b\n", 2724 PORTNAME(ap), 2725 is, AHCI_PFMT_IS, 2726 serr, AHCI_PFMT_SERR); 2727 ap->ap_flags |= AP_F_IFS_IGNORED; 2728 } 2729 2730 /* 2731 * Try to clear the error condition. The IFS error killed 2732 * the port so stop it so we can restart it. 2733 */ 2734 ahci_pwrite(ap, AHCI_PREG_SERR, -1); 2735 ahci_pwrite(ap, AHCI_PREG_IS, AHCI_PREG_IS_IFS); 2736 is &= ~AHCI_PREG_IS_IFS; 2737 need = NEED_RESTART; 2738 goto failall; 2739 } 2740 2741 /* 2742 * Port change (hot-plug) (blockable). 2743 * 2744 * A PRCS interrupt can occur: 2745 * (1) On hot-unplug / normal-unplug (phy lost) 2746 * (2) Sometimes on hot-plug too. 2747 * 2748 * A PCS interrupt can occur in a number of situations: 2749 * (1) On hot-plug once communication is established 2750 * (2) On hot-unplug sometimes. 2751 * (3) For chipsets with badly written firmware it can occur 2752 * during INIT/RESET sequences due to the device reset. 2753 * (4) For chipsets with badly written firmware it can occur 2754 * when it thinks an unsolicited COMRESET is received 2755 * during a INIT/RESET sequence, even though we actually 2756 * did request it. 2757 * 2758 * XXX We can then check the CPS (Cold Presence State) bit, if 2759 * supported, to determine if a device is plugged in or not and do 2760 * the right thing. 2761 * 2762 * PCS interrupts are cleared by clearing DIAG_X. If this occurs 2763 * command processing is automatically stopped (CR goes inactive) 2764 * and the port must be stopped and restarted. 2765 * 2766 * WARNING: AMD parts (e.g. 880G chipset, probably others) can 2767 * generate PCS on initialization even when device is 2768 * already connected up. It is unclear why this happens. 2769 * Depending on the state of the device detect this can 2770 * cause us to go into harsh reinit or hot-plug insertion 2771 * mode. 2772 * 2773 * WARNING: PCS errors can be repetitive (e.g. unsolicited COMRESET 2774 * continues to flow in from the device), we must clear the 2775 * interrupt in all cases and enforce a delay to prevent 2776 * a livelock and give the port time to settle down. 2777 * Only print something if we aren't in INIT/HARD-RESET. 2778 */ 2779 if (is & (AHCI_PREG_IS_PCS | AHCI_PREG_IS_PRCS)) { 2780 /* 2781 * Try to clear the error. Because of the repetitiveness 2782 * of this interrupt avoid any harsh action if the port is 2783 * already in the init or hard-reset probe state. 2784 */ 2785 ahci_pwrite(ap, AHCI_PREG_SERR, -1); 2786 /* (AHCI_PREG_SERR_DIAG_N | AHCI_PREG_SERR_DIAG_X) */ 2787 ahci_pwrite(ap, AHCI_PREG_IS, 2788 is & (AHCI_PREG_IS_PCS | AHCI_PREG_IS_PRCS)); 2789 2790 /* 2791 * Ignore PCS/PRCS errors during probes (but still clear the 2792 * interrupt to avoid a livelock). The AMD 880/890/SB850 2793 * chipsets do not mask PCS/PRCS internally during reset 2794 * sequences. 2795 */ 2796 if (ap->ap_flags & AP_F_IN_RESET) 2797 goto skip_pcs; 2798 2799 if (ap->ap_probe == ATA_PROBE_NEED_INIT || 2800 ap->ap_probe == ATA_PROBE_NEED_HARD_RESET) { 2801 is &= ~(AHCI_PREG_IS_PCS | AHCI_PREG_IS_PRCS); 2802 need = NEED_NOTHING; 2803 ahci_os_sleep(1000); 2804 goto failall; 2805 } 2806 kprintf("%s: Transient Errors: %b (%d)\n", 2807 PORTNAME(ap), is, AHCI_PFMT_IS, ap->ap_probe); 2808 is &= ~(AHCI_PREG_IS_PCS | AHCI_PREG_IS_PRCS); 2809 ahci_os_sleep(200); 2810 2811 /* 2812 * Stop the port and figure out what to do next. 2813 */ 2814 ahci_port_stop(ap, 0); 2815 stopped = 1; 2816 2817 switch (ahci_pread(ap, AHCI_PREG_SSTS) & AHCI_PREG_SSTS_DET) { 2818 case AHCI_PREG_SSTS_DET_DEV: 2819 /* 2820 * Device detect 2821 */ 2822 if (ap->ap_probe == ATA_PROBE_FAILED) { 2823 need = NEED_HOTPLUG_INSERT; 2824 goto fatal; 2825 } 2826 need = NEED_RESTART; 2827 break; 2828 case AHCI_PREG_SSTS_DET_DEV_NE: 2829 /* 2830 * Device not communicating. AMD parts seem to 2831 * like to throw this error on initialization 2832 * for no reason that I can fathom. 2833 */ 2834 kprintf("%s: Device present but not communicating, " 2835 "attempting port restart\n", 2836 PORTNAME(ap)); 2837 need = NEED_REINIT; 2838 goto fatal; 2839 default: 2840 if (ap->ap_probe != ATA_PROBE_FAILED) { 2841 need = NEED_HOTPLUG_REMOVE; 2842 goto fatal; 2843 } 2844 need = NEED_RESTART; 2845 break; 2846 } 2847 skip_pcs: 2848 ; 2849 } 2850 2851 /* 2852 * Check for remaining errors - they are fatal. (blockable) 2853 */ 2854 if (is & (AHCI_PREG_IS_TFES | AHCI_PREG_IS_HBFS | AHCI_PREG_IS_IFS | 2855 AHCI_PREG_IS_OFS | AHCI_PREG_IS_UFS)) { 2856 u_int32_t serr; 2857 2858 ahci_pwrite(ap, AHCI_PREG_IS, 2859 is & (AHCI_PREG_IS_TFES | AHCI_PREG_IS_HBFS | 2860 AHCI_PREG_IS_IFS | AHCI_PREG_IS_OFS | 2861 AHCI_PREG_IS_UFS)); 2862 serr = ahci_pread(ap, AHCI_PREG_SERR); 2863 kprintf("%s: Unrecoverable errors (IS: %b, SERR: %b), " 2864 "disabling port.\n", 2865 PORTNAME(ap), 2866 is, AHCI_PFMT_IS, 2867 serr, AHCI_PFMT_SERR 2868 ); 2869 is &= ~(AHCI_PREG_IS_TFES | AHCI_PREG_IS_HBFS | 2870 AHCI_PREG_IS_IFS | AHCI_PREG_IS_OFS | 2871 AHCI_PREG_IS_UFS); 2872 2873 /* 2874 * Fail all commands but then what? For now try to 2875 * reinitialize the port. 2876 */ 2877 need = NEED_REINIT; 2878 goto fatal; 2879 } 2880 2881 /* 2882 * Fail all outstanding commands if we know the port won't recover. 2883 * 2884 * We may have a ccb_at if the failed command is known and was 2885 * being sent to a device over a port multiplier (PM). In this 2886 * case if the port itself has not completely failed we fail just 2887 * the commands related to that target. 2888 * 2889 * ci_saved contains the mask of active commands as of when the 2890 * error occured, prior to any port stops. 2891 */ 2892 if (ap->ap_state == AP_S_FATAL_ERROR) { 2893 fatal: 2894 ap->ap_state = AP_S_FATAL_ERROR; 2895 failall: 2896 ahci_port_stop(ap, 0); 2897 stopped = 1; 2898 2899 /* 2900 * Error all the active slots not already errored. 2901 */ 2902 ci_masked = ci_saved & *active & ~ap->ap_expired; 2903 if (ci_masked) { 2904 kprintf("%s: Failing all commands: %08x\n", 2905 PORTNAME(ap), ci_masked); 2906 } 2907 2908 while (ci_masked) { 2909 slot = ffs(ci_masked) - 1; 2910 ccb = &ap->ap_ccbs[slot]; 2911 ccb->ccb_xa.state = ATA_S_TIMEOUT; 2912 ap->ap_expired |= 1 << slot; 2913 ci_saved &= ~(1 << slot); 2914 ci_masked &= ~(1 << slot); 2915 } 2916 2917 /* 2918 * Clear bits in ci_saved (cause completions to be run) 2919 * for all slots which are not active. 2920 */ 2921 ci_saved &= ~*active; 2922 2923 /* 2924 * Don't restart the port if our problems were deemed fatal. 2925 * 2926 * Also acknowlege all fatal interrupt sources to prevent 2927 * a livelock. 2928 */ 2929 if (ap->ap_state == AP_S_FATAL_ERROR) { 2930 if (need == NEED_RESTART) 2931 need = NEED_NOTHING; 2932 ahci_pwrite(ap, AHCI_PREG_IS, 2933 AHCI_PREG_IS_TFES | AHCI_PREG_IS_HBFS | 2934 AHCI_PREG_IS_IFS | AHCI_PREG_IS_OFS | 2935 AHCI_PREG_IS_UFS); 2936 } 2937 } 2938 2939 /* 2940 * If we are stopped the AHCI chipset is supposed to have cleared 2941 * CI and SACT. Did it? If it didn't we try very hard to clear 2942 * the fields otherwise we may end up completing CCBs which are 2943 * actually still active. 2944 * 2945 * IFS errors on (at least) AMD chipsets create this confusion. 2946 */ 2947 if (stopped) { 2948 u_int32_t mask; 2949 if ((mask = ahci_pactive(ap)) != 0) { 2950 kprintf("%s: chipset failed to clear " 2951 "active cmds %08x\n", 2952 PORTNAME(ap), mask); 2953 ahci_port_start(ap); 2954 ahci_port_stop(ap, 0); 2955 if ((mask = ahci_pactive(ap)) != 0) { 2956 kprintf("%s: unable to prod the chip into " 2957 "clearing active cmds %08x\n", 2958 PORTNAME(ap), mask); 2959 /* what do we do now? */ 2960 } 2961 } 2962 } 2963 2964 /* 2965 * CCB completion (non blocking). 2966 * 2967 * CCB completion is detected by noticing its slot's bit in CI has 2968 * changed to zero some time after we activated it. 2969 * If we are polling, we may only be interested in particular slot(s). 2970 * 2971 * Any active bits not saved are completed within the restrictions 2972 * imposed by the caller. 2973 */ 2974 ci_masked = ~ci_saved & *active; 2975 while (ci_masked) { 2976 slot = ffs(ci_masked) - 1; 2977 ccb = &ap->ap_ccbs[slot]; 2978 ci_masked &= ~(1 << slot); 2979 2980 DPRINTF(AHCI_D_INTR, "%s: slot %d is complete%s\n", 2981 PORTNAME(ap), slot, ccb->ccb_xa.state == ATA_S_ERROR ? 2982 " (error)" : ""); 2983 2984 bus_dmamap_sync(sc->sc_tag_cmdh, 2985 AHCI_DMA_MAP(ap->ap_dmamem_cmd_list), 2986 BUS_DMASYNC_POSTWRITE); 2987 2988 bus_dmamap_sync(sc->sc_tag_cmdt, 2989 AHCI_DMA_MAP(ap->ap_dmamem_cmd_table), 2990 BUS_DMASYNC_POSTWRITE); 2991 2992 bus_dmamap_sync(sc->sc_tag_rfis, 2993 AHCI_DMA_MAP(ap->ap_dmamem_rfis), 2994 BUS_DMASYNC_POSTREAD); 2995 2996 *active &= ~(1 << ccb->ccb_slot); 2997 if (active == &ap->ap_active) { 2998 KKASSERT(ap->ap_active_cnt > 0); 2999 --ap->ap_active_cnt; 3000 } 3001 3002 /* 3003 * Complete the ccb. If the ccb was marked expired it 3004 * was probably already removed from the command processor, 3005 * so don't take the clear ci_saved bit as meaning the 3006 * command actually succeeded, it didn't. 3007 */ 3008 if (ap->ap_expired & (1 << ccb->ccb_slot)) { 3009 ap->ap_expired &= ~(1 << ccb->ccb_slot); 3010 ccb->ccb_xa.state = ATA_S_TIMEOUT; 3011 ccb->ccb_done(ccb); 3012 ccb->ccb_xa.complete(&ccb->ccb_xa); 3013 } else { 3014 if (ccb->ccb_xa.state == ATA_S_ONCHIP) { 3015 ccb->ccb_xa.state = ATA_S_COMPLETE; 3016 if (ccb->ccb_xa.flags & ATA_F_AUTOSENSE) { 3017 memcpy(&ccb->ccb_xa.rfis, 3018 ap->ap_rfis->rfis, 3019 sizeof(struct ata_fis_d2h)); 3020 if (ccb->ccb_xa.state == ATA_S_TIMEOUT) 3021 ccb->ccb_xa.state = ATA_S_ERROR; 3022 } 3023 } 3024 ccb->ccb_done(ccb); 3025 } 3026 } 3027 3028 /* 3029 * Cleanup. Will not be set if non-blocking. 3030 */ 3031 switch(need) { 3032 case NEED_NOTHING: 3033 /* 3034 * If operating normally and not stopped the interrupt was 3035 * probably just a normal completion and we may be able to 3036 * issue more commands. 3037 */ 3038 if (stopped == 0 && ap->ap_state != AP_S_FATAL_ERROR) 3039 ahci_issue_pending_commands(ap, NULL); 3040 break; 3041 case NEED_RESTART: 3042 /* 3043 * A recoverable error occured and we can restart outstanding 3044 * commands on the port. 3045 */ 3046 ci_saved &= ~ap->ap_expired; 3047 if (ci_saved) { 3048 kprintf("%s: Restart %08x\n", PORTNAME(ap), ci_saved); 3049 ahci_issue_saved_commands(ap, ci_saved); 3050 } 3051 3052 /* 3053 * Potentially issue new commands if not in a failed 3054 * state. 3055 */ 3056 if (ap->ap_state != AP_S_FATAL_ERROR) { 3057 ahci_port_start(ap); 3058 ahci_issue_pending_commands(ap, NULL); 3059 } 3060 break; 3061 case NEED_REINIT: 3062 /* 3063 * Something horrible happened to the port and we 3064 * need to reinitialize it. 3065 */ 3066 kprintf("%s: REINIT - Attempting to reinitialize the port " 3067 "after it had a horrible accident\n", 3068 PORTNAME(ap)); 3069 ap->ap_flags |= AP_F_IN_RESET; 3070 ap->ap_flags |= AP_F_HARSH_REINIT; 3071 ap->ap_probe = ATA_PROBE_NEED_INIT; 3072 ahci_cam_changed(ap, NULL, -1); 3073 break; 3074 case NEED_HOTPLUG_INSERT: 3075 /* 3076 * A hot-plug insertion event has occured and all 3077 * outstanding commands have already been revoked. 3078 * 3079 * Don't recurse if this occurs while we are 3080 * resetting the port. 3081 */ 3082 if ((ap->ap_flags & AP_F_IN_RESET) == 0) { 3083 kprintf("%s: HOTPLUG - Device inserted\n", 3084 PORTNAME(ap)); 3085 ap->ap_probe = ATA_PROBE_NEED_INIT; 3086 ahci_cam_changed(ap, NULL, -1); 3087 } 3088 break; 3089 case NEED_HOTPLUG_REMOVE: 3090 /* 3091 * A hot-plug removal event has occured and all 3092 * outstanding commands have already been revoked. 3093 * 3094 * Don't recurse if this occurs while we are 3095 * resetting the port. 3096 */ 3097 if ((ap->ap_flags & AP_F_IN_RESET) == 0) { 3098 kprintf("%s: HOTPLUG - Device removed\n", 3099 PORTNAME(ap)); 3100 ahci_port_hardstop(ap); 3101 /* ap_probe set to failed */ 3102 ahci_cam_changed(ap, NULL, -1); 3103 } 3104 break; 3105 default: 3106 break; 3107 } 3108 } 3109 3110 struct ahci_ccb * 3111 ahci_get_ccb(struct ahci_port *ap) 3112 { 3113 struct ahci_ccb *ccb; 3114 3115 lockmgr(&ap->ap_ccb_lock, LK_EXCLUSIVE); 3116 ccb = TAILQ_FIRST(&ap->ap_ccb_free); 3117 if (ccb != NULL) { 3118 KKASSERT(ccb->ccb_xa.state == ATA_S_PUT); 3119 TAILQ_REMOVE(&ap->ap_ccb_free, ccb, ccb_entry); 3120 ccb->ccb_xa.state = ATA_S_SETUP; 3121 ccb->ccb_xa.flags = 0; 3122 ccb->ccb_xa.at = NULL; 3123 } 3124 lockmgr(&ap->ap_ccb_lock, LK_RELEASE); 3125 3126 return (ccb); 3127 } 3128 3129 void 3130 ahci_put_ccb(struct ahci_ccb *ccb) 3131 { 3132 struct ahci_port *ap = ccb->ccb_port; 3133 3134 lockmgr(&ap->ap_ccb_lock, LK_EXCLUSIVE); 3135 ccb->ccb_xa.state = ATA_S_PUT; 3136 ++ccb->ccb_xa.serial; 3137 TAILQ_INSERT_TAIL(&ap->ap_ccb_free, ccb, ccb_entry); 3138 lockmgr(&ap->ap_ccb_lock, LK_RELEASE); 3139 } 3140 3141 struct ahci_ccb * 3142 ahci_get_err_ccb(struct ahci_port *ap) 3143 { 3144 struct ahci_ccb *err_ccb; 3145 u_int32_t sact; 3146 u_int32_t ci; 3147 3148 /* No commands may be active on the chip. */ 3149 3150 if (ap->ap_sc->sc_cap & AHCI_REG_CAP_SNCQ) { 3151 sact = ahci_pread(ap, AHCI_PREG_SACT); 3152 if (sact != 0) { 3153 kprintf("%s: ahci_get_err_ccb but SACT %08x != 0?\n", 3154 PORTNAME(ap), sact); 3155 } 3156 } 3157 ci = ahci_pread(ap, AHCI_PREG_CI); 3158 if (ci) { 3159 kprintf("%s: ahci_get_err_ccb: ci not 0 (%08x)\n", 3160 ap->ap_name, ci); 3161 } 3162 KKASSERT(ci == 0); 3163 KKASSERT((ap->ap_flags & AP_F_ERR_CCB_RESERVED) == 0); 3164 ap->ap_flags |= AP_F_ERR_CCB_RESERVED; 3165 3166 /* Save outstanding command state. */ 3167 ap->ap_err_saved_active = ap->ap_active; 3168 ap->ap_err_saved_active_cnt = ap->ap_active_cnt; 3169 ap->ap_err_saved_sactive = ap->ap_sactive; 3170 3171 /* 3172 * Pretend we have no commands outstanding, so that completions won't 3173 * run prematurely. 3174 */ 3175 ap->ap_active = ap->ap_active_cnt = ap->ap_sactive = 0; 3176 3177 /* 3178 * Grab a CCB to use for error recovery. This should never fail, as 3179 * we ask atascsi to reserve one for us at init time. 3180 */ 3181 err_ccb = ap->ap_err_ccb; 3182 KKASSERT(err_ccb != NULL); 3183 err_ccb->ccb_xa.flags = 0; 3184 err_ccb->ccb_done = ahci_empty_done; 3185 3186 return err_ccb; 3187 } 3188 3189 void 3190 ahci_put_err_ccb(struct ahci_ccb *ccb) 3191 { 3192 struct ahci_port *ap = ccb->ccb_port; 3193 u_int32_t sact; 3194 u_int32_t ci; 3195 3196 KKASSERT((ap->ap_flags & AP_F_ERR_CCB_RESERVED) != 0); 3197 3198 /* 3199 * No commands may be active on the chip 3200 */ 3201 if (ap->ap_sc->sc_cap & AHCI_REG_CAP_SNCQ) { 3202 sact = ahci_pread(ap, AHCI_PREG_SACT); 3203 if (sact) { 3204 panic("ahci_port_err_ccb(%d) but SACT %08x != 0\n", 3205 ccb->ccb_slot, sact); 3206 } 3207 } 3208 ci = ahci_pread(ap, AHCI_PREG_CI); 3209 if (ci) { 3210 panic("ahci_put_err_ccb(%d) but CI %08x != 0 " 3211 "(act=%08x sact=%08x)\n", 3212 ccb->ccb_slot, ci, 3213 ap->ap_active, ap->ap_sactive); 3214 } 3215 3216 KKASSERT(ccb == ap->ap_err_ccb); 3217 3218 /* Restore outstanding command state */ 3219 ap->ap_sactive = ap->ap_err_saved_sactive; 3220 ap->ap_active_cnt = ap->ap_err_saved_active_cnt; 3221 ap->ap_active = ap->ap_err_saved_active; 3222 3223 ap->ap_flags &= ~AP_F_ERR_CCB_RESERVED; 3224 } 3225 3226 /* 3227 * Read log page to get NCQ error. 3228 * 3229 * NOTE: NCQ not currently supported on port multipliers. XXX 3230 */ 3231 int 3232 ahci_port_read_ncq_error(struct ahci_port *ap, int target) 3233 { 3234 struct ata_log_page_10h *log; 3235 struct ahci_ccb *ccb; 3236 struct ahci_ccb *ccb2; 3237 struct ahci_cmd_hdr *cmd_slot; 3238 struct ata_fis_h2d *fis; 3239 int err_slot; 3240 3241 if (bootverbose) { 3242 kprintf("%s: READ LOG PAGE target %d\n", PORTNAME(ap), 3243 target); 3244 } 3245 3246 /* 3247 * Prep error CCB for READ LOG EXT, page 10h, 1 sector. 3248 * 3249 * Getting err_ccb clears active/sactive/active_cnt, putting 3250 * it back restores the fields. 3251 */ 3252 ccb = ahci_get_err_ccb(ap); 3253 ccb->ccb_xa.flags = ATA_F_READ | ATA_F_POLL; 3254 ccb->ccb_xa.data = ap->ap_err_scratch; 3255 ccb->ccb_xa.datalen = 512; 3256 ccb->ccb_xa.complete = ahci_dummy_done; 3257 ccb->ccb_xa.at = ap->ap_ata[target]; 3258 3259 fis = (struct ata_fis_h2d *)ccb->ccb_cmd_table->cfis; 3260 bzero(fis, sizeof(*fis)); 3261 fis->type = ATA_FIS_TYPE_H2D; 3262 fis->flags = ATA_H2D_FLAGS_CMD | target; 3263 fis->command = ATA_C_READ_LOG_EXT; 3264 fis->lba_low = 0x10; /* queued error log page (10h) */ 3265 fis->sector_count = 1; /* number of sectors (1) */ 3266 fis->sector_count_exp = 0; 3267 fis->lba_mid = 0; /* starting offset */ 3268 fis->lba_mid_exp = 0; 3269 fis->device = 0; 3270 3271 cmd_slot = ccb->ccb_cmd_hdr; 3272 cmd_slot->flags = htole16(5); /* FIS length: 5 DWORDS */ 3273 3274 if (ahci_load_prdt(ccb) != 0) { 3275 err_slot = -1; 3276 goto err; 3277 } 3278 3279 ccb->ccb_xa.state = ATA_S_PENDING; 3280 if (ahci_poll(ccb, 1000, ahci_quick_timeout) != ATA_S_COMPLETE) { 3281 err_slot = -1; 3282 ahci_unload_prdt(ccb); 3283 goto err; 3284 } 3285 ahci_unload_prdt(ccb); 3286 3287 /* 3288 * Success, extract failed register set and tags from the scratch 3289 * space. 3290 */ 3291 log = (struct ata_log_page_10h *)ap->ap_err_scratch; 3292 if (log->err_regs.type & ATA_LOG_10H_TYPE_NOTQUEUED) { 3293 /* Not queued bit was set - wasn't an NCQ error? */ 3294 kprintf("%s: read NCQ error page, but not an NCQ error?\n", 3295 PORTNAME(ap)); 3296 err_slot = -1; 3297 } else { 3298 /* Copy back the log record as a D2H register FIS. */ 3299 err_slot = log->err_regs.type & ATA_LOG_10H_TYPE_TAG_MASK; 3300 3301 ccb2 = &ap->ap_ccbs[err_slot]; 3302 if (ccb2->ccb_xa.state == ATA_S_ONCHIP) { 3303 kprintf("%s: read NCQ error page slot=%d\n", 3304 ATANAME(ap, ccb2->ccb_xa.at), 3305 err_slot); 3306 memcpy(&ccb2->ccb_xa.rfis, &log->err_regs, 3307 sizeof(struct ata_fis_d2h)); 3308 ccb2->ccb_xa.rfis.type = ATA_FIS_TYPE_D2H; 3309 ccb2->ccb_xa.rfis.flags = 0; 3310 } else { 3311 kprintf("%s: read NCQ error page slot=%d, " 3312 "slot does not match any cmds\n", 3313 ATANAME(ccb2->ccb_port, ccb2->ccb_xa.at), 3314 err_slot); 3315 err_slot = -1; 3316 } 3317 } 3318 err: 3319 ahci_put_err_ccb(ccb); 3320 kprintf("%s: DONE log page target %d err_slot=%d\n", 3321 PORTNAME(ap), target, err_slot); 3322 return (err_slot); 3323 } 3324 3325 /* 3326 * Allocate memory for various structures DMAd by hardware. The maximum 3327 * number of segments for these tags is 1 so the DMA memory will have a 3328 * single physical base address. 3329 */ 3330 struct ahci_dmamem * 3331 ahci_dmamem_alloc(struct ahci_softc *sc, bus_dma_tag_t tag) 3332 { 3333 struct ahci_dmamem *adm; 3334 int error; 3335 3336 adm = kmalloc(sizeof(*adm), M_DEVBUF, M_INTWAIT | M_ZERO); 3337 3338 error = bus_dmamem_alloc(tag, (void **)&adm->adm_kva, 3339 BUS_DMA_ZERO, &adm->adm_map); 3340 if (error == 0) { 3341 adm->adm_tag = tag; 3342 error = bus_dmamap_load(tag, adm->adm_map, 3343 adm->adm_kva, 3344 bus_dma_tag_getmaxsize(tag), 3345 ahci_dmamem_saveseg, &adm->adm_busaddr, 3346 0); 3347 } 3348 if (error) { 3349 if (adm->adm_map) { 3350 bus_dmamap_destroy(tag, adm->adm_map); 3351 adm->adm_map = NULL; 3352 adm->adm_tag = NULL; 3353 adm->adm_kva = NULL; 3354 } 3355 kfree(adm, M_DEVBUF); 3356 adm = NULL; 3357 } 3358 return (adm); 3359 } 3360 3361 static 3362 void 3363 ahci_dmamem_saveseg(void *info, bus_dma_segment_t *segs, int nsegs, int error) 3364 { 3365 KKASSERT(error == 0); 3366 KKASSERT(nsegs == 1); 3367 *(bus_addr_t *)info = segs->ds_addr; 3368 } 3369 3370 3371 void 3372 ahci_dmamem_free(struct ahci_softc *sc, struct ahci_dmamem *adm) 3373 { 3374 if (adm->adm_map) { 3375 bus_dmamap_unload(adm->adm_tag, adm->adm_map); 3376 bus_dmamap_destroy(adm->adm_tag, adm->adm_map); 3377 adm->adm_map = NULL; 3378 adm->adm_tag = NULL; 3379 adm->adm_kva = NULL; 3380 } 3381 kfree(adm, M_DEVBUF); 3382 } 3383 3384 u_int32_t 3385 ahci_read(struct ahci_softc *sc, bus_size_t r) 3386 { 3387 bus_space_barrier(sc->sc_iot, sc->sc_ioh, r, 4, 3388 BUS_SPACE_BARRIER_READ); 3389 return (bus_space_read_4(sc->sc_iot, sc->sc_ioh, r)); 3390 } 3391 3392 void 3393 ahci_write(struct ahci_softc *sc, bus_size_t r, u_int32_t v) 3394 { 3395 bus_space_write_4(sc->sc_iot, sc->sc_ioh, r, v); 3396 bus_space_barrier(sc->sc_iot, sc->sc_ioh, r, 4, 3397 BUS_SPACE_BARRIER_WRITE); 3398 } 3399 3400 u_int32_t 3401 ahci_pread(struct ahci_port *ap, bus_size_t r) 3402 { 3403 bus_space_barrier(ap->ap_sc->sc_iot, ap->ap_ioh, r, 4, 3404 BUS_SPACE_BARRIER_READ); 3405 return (bus_space_read_4(ap->ap_sc->sc_iot, ap->ap_ioh, r)); 3406 } 3407 3408 void 3409 ahci_pwrite(struct ahci_port *ap, bus_size_t r, u_int32_t v) 3410 { 3411 bus_space_write_4(ap->ap_sc->sc_iot, ap->ap_ioh, r, v); 3412 bus_space_barrier(ap->ap_sc->sc_iot, ap->ap_ioh, r, 4, 3413 BUS_SPACE_BARRIER_WRITE); 3414 } 3415 3416 /* 3417 * Wait up to (timeout) milliseconds for the masked port register to 3418 * match the target. 3419 * 3420 * Timeout is in milliseconds. 3421 */ 3422 int 3423 ahci_pwait_eq(struct ahci_port *ap, int timeout, 3424 bus_size_t r, u_int32_t mask, u_int32_t target) 3425 { 3426 int t; 3427 3428 /* 3429 * Loop hard up to 100uS 3430 */ 3431 for (t = 0; t < 100; ++t) { 3432 if ((ahci_pread(ap, r) & mask) == target) 3433 return (0); 3434 ahci_os_hardsleep(1); /* us */ 3435 } 3436 3437 do { 3438 timeout -= ahci_os_softsleep(); 3439 if ((ahci_pread(ap, r) & mask) == target) 3440 return (0); 3441 } while (timeout > 0); 3442 return (1); 3443 } 3444 3445 int 3446 ahci_wait_ne(struct ahci_softc *sc, bus_size_t r, u_int32_t mask, 3447 u_int32_t target) 3448 { 3449 int t; 3450 3451 /* 3452 * Loop hard up to 100uS 3453 */ 3454 for (t = 0; t < 100; ++t) { 3455 if ((ahci_read(sc, r) & mask) != target) 3456 return (0); 3457 ahci_os_hardsleep(1); /* us */ 3458 } 3459 3460 /* 3461 * And one millisecond the slow way 3462 */ 3463 t = 1000; 3464 do { 3465 t -= ahci_os_softsleep(); 3466 if ((ahci_read(sc, r) & mask) != target) 3467 return (0); 3468 } while (t > 0); 3469 3470 return (1); 3471 } 3472 3473 3474 /* 3475 * Acquire an ata transfer. 3476 * 3477 * Pass a NULL at for direct-attached transfers, and a non-NULL at for 3478 * targets that go through the port multiplier. 3479 */ 3480 struct ata_xfer * 3481 ahci_ata_get_xfer(struct ahci_port *ap, struct ata_port *at) 3482 { 3483 struct ahci_ccb *ccb; 3484 3485 ccb = ahci_get_ccb(ap); 3486 if (ccb == NULL) { 3487 DPRINTF(AHCI_D_XFER, "%s: ahci_ata_get_xfer: NULL ccb\n", 3488 PORTNAME(ap)); 3489 return (NULL); 3490 } 3491 3492 DPRINTF(AHCI_D_XFER, "%s: ahci_ata_get_xfer got slot %d\n", 3493 PORTNAME(ap), ccb->ccb_slot); 3494 3495 bzero(ccb->ccb_xa.fis, sizeof(*ccb->ccb_xa.fis)); 3496 ccb->ccb_xa.at = at; 3497 ccb->ccb_xa.fis->type = ATA_FIS_TYPE_H2D; 3498 3499 return (&ccb->ccb_xa); 3500 } 3501 3502 void 3503 ahci_ata_put_xfer(struct ata_xfer *xa) 3504 { 3505 struct ahci_ccb *ccb = (struct ahci_ccb *)xa; 3506 3507 DPRINTF(AHCI_D_XFER, "ahci_ata_put_xfer slot %d\n", ccb->ccb_slot); 3508 3509 ahci_put_ccb(ccb); 3510 } 3511 3512 int 3513 ahci_ata_cmd(struct ata_xfer *xa) 3514 { 3515 struct ahci_ccb *ccb = (struct ahci_ccb *)xa; 3516 struct ahci_cmd_hdr *cmd_slot; 3517 3518 KKASSERT(xa->state == ATA_S_SETUP); 3519 3520 if (ccb->ccb_port->ap_state == AP_S_FATAL_ERROR) 3521 goto failcmd; 3522 ccb->ccb_done = ahci_ata_cmd_done; 3523 3524 cmd_slot = ccb->ccb_cmd_hdr; 3525 cmd_slot->flags = htole16(5); /* FIS length (in DWORDs) */ 3526 if (ccb->ccb_xa.at) { 3527 cmd_slot->flags |= htole16(ccb->ccb_xa.at->at_target << 3528 AHCI_CMD_LIST_FLAG_PMP_SHIFT); 3529 } 3530 3531 if (xa->flags & ATA_F_WRITE) 3532 cmd_slot->flags |= htole16(AHCI_CMD_LIST_FLAG_W); 3533 3534 if (xa->flags & ATA_F_PACKET) 3535 cmd_slot->flags |= htole16(AHCI_CMD_LIST_FLAG_A); 3536 3537 if (ahci_load_prdt(ccb) != 0) 3538 goto failcmd; 3539 3540 xa->state = ATA_S_PENDING; 3541 3542 if (xa->flags & ATA_F_POLL) 3543 return (ahci_poll(ccb, xa->timeout, ahci_ata_cmd_timeout)); 3544 3545 crit_enter(); 3546 KKASSERT((xa->flags & ATA_F_TIMEOUT_EXPIRED) == 0); 3547 xa->flags |= ATA_F_TIMEOUT_DESIRED; 3548 ahci_start(ccb); 3549 crit_exit(); 3550 return (xa->state); 3551 3552 failcmd: 3553 crit_enter(); 3554 xa->state = ATA_S_ERROR; 3555 xa->complete(xa); 3556 crit_exit(); 3557 return (ATA_S_ERROR); 3558 } 3559 3560 void 3561 ahci_ata_cmd_done(struct ahci_ccb *ccb) 3562 { 3563 struct ata_xfer *xa = &ccb->ccb_xa; 3564 int serial; 3565 3566 /* 3567 * NOTE: Callout does not lock port and may race us modifying 3568 * the flags, so make sure its stopped. 3569 * 3570 * A callout race can clean up the ccb. A change in the 3571 * serial number should catch this condition. 3572 */ 3573 if (xa->flags & ATA_F_TIMEOUT_RUNNING) { 3574 serial = ccb->ccb_xa.serial; 3575 callout_stop_sync(&ccb->ccb_timeout); 3576 if (serial != ccb->ccb_xa.serial) { 3577 kprintf("%s: Warning: timeout race ccb %p\n", 3578 PORTNAME(ccb->ccb_port), ccb); 3579 return; 3580 } 3581 xa->flags &= ~ATA_F_TIMEOUT_RUNNING; 3582 } 3583 xa->flags &= ~(ATA_F_TIMEOUT_DESIRED | ATA_F_TIMEOUT_EXPIRED); 3584 ccb->ccb_port->ap_expired &= ~(1 << ccb->ccb_slot); 3585 3586 KKASSERT(xa->state != ATA_S_ONCHIP && xa->state != ATA_S_PUT); 3587 ahci_unload_prdt(ccb); 3588 3589 if (xa->state != ATA_S_TIMEOUT) 3590 xa->complete(xa); 3591 } 3592 3593 /* 3594 * Timeout from callout, MPSAFE - nothing can mess with the CCB's flags 3595 * while the callout is runing. 3596 * 3597 * We can't safely get the port lock here or delay, we could block 3598 * the callout thread. 3599 */ 3600 static void 3601 ahci_ata_cmd_timeout_unserialized(void *arg) 3602 { 3603 struct ahci_ccb *ccb = arg; 3604 struct ahci_port *ap = ccb->ccb_port; 3605 3606 KKASSERT(ccb->ccb_xa.flags & ATA_F_TIMEOUT_RUNNING); 3607 ccb->ccb_xa.flags &= ~ATA_F_TIMEOUT_RUNNING; 3608 ccb->ccb_xa.flags |= ATA_F_TIMEOUT_EXPIRED; 3609 ahci_os_signal_port_thread(ap, AP_SIGF_TIMEOUT); 3610 } 3611 3612 /* 3613 * Timeout code, typically called when the port command processor is running. 3614 * 3615 * We have to be very very careful here. We cannot stop the port unless 3616 * CR is already clear or the only active commands remaining are timed-out 3617 * ones. Otherwise stopping the port will race the command processor and 3618 * we can lose events. While we can theoretically just restart everything 3619 * that could result in a double-issue which will not work for ATAPI commands. 3620 */ 3621 void 3622 ahci_ata_cmd_timeout(struct ahci_ccb *ccb) 3623 { 3624 struct ata_xfer *xa = &ccb->ccb_xa; 3625 struct ahci_port *ap = ccb->ccb_port; 3626 struct ata_port *at; 3627 u_int32_t ci_saved; 3628 u_int32_t mask; 3629 int slot; 3630 3631 at = ccb->ccb_xa.at; 3632 3633 kprintf("%s: CMD TIMEOUT state=%d slot=%d\n" 3634 "\tcmd-reg 0x%b\n" 3635 "\tsactive=%08x active=%08x expired=%08x\n" 3636 "\t sact=%08x ci=%08x\n" 3637 "\t STS=%b\n", 3638 ATANAME(ap, at), 3639 ccb->ccb_xa.state, ccb->ccb_slot, 3640 ahci_pread(ap, AHCI_PREG_CMD), AHCI_PFMT_CMD, 3641 ap->ap_sactive, ap->ap_active, ap->ap_expired, 3642 ahci_pread(ap, AHCI_PREG_SACT), 3643 ahci_pread(ap, AHCI_PREG_CI), 3644 ahci_pread(ap, AHCI_PREG_TFD), AHCI_PFMT_TFD_STS 3645 ); 3646 3647 3648 /* 3649 * NOTE: Timeout will not be running if the command was polled. 3650 * If we got here at least one of these flags should be set. 3651 */ 3652 KKASSERT(xa->flags & (ATA_F_POLL | ATA_F_TIMEOUT_DESIRED | 3653 ATA_F_TIMEOUT_RUNNING)); 3654 xa->flags &= ~(ATA_F_TIMEOUT_RUNNING | ATA_F_TIMEOUT_EXPIRED); 3655 3656 if (ccb->ccb_xa.state == ATA_S_PENDING) { 3657 TAILQ_REMOVE(&ap->ap_ccb_pending, ccb, ccb_entry); 3658 ccb->ccb_xa.state = ATA_S_TIMEOUT; 3659 ccb->ccb_done(ccb); 3660 xa->complete(xa); 3661 ahci_issue_pending_commands(ap, NULL); 3662 return; 3663 } 3664 if (ccb->ccb_xa.state != ATA_S_ONCHIP) { 3665 kprintf("%s: Unexpected state during timeout: %d\n", 3666 ATANAME(ap, at), ccb->ccb_xa.state); 3667 return; 3668 } 3669 3670 /* 3671 * Ok, we can only get this command off the chip if CR is inactive 3672 * or if the only commands running on the chip are all expired. 3673 * Otherwise we have to wait until the port is in a safe state. 3674 * 3675 * Do not set state here, it will cause polls to return when the 3676 * ccb is not yet off the chip. 3677 */ 3678 ap->ap_expired |= 1 << ccb->ccb_slot; 3679 3680 if ((ahci_pread(ap, AHCI_PREG_CMD) & AHCI_PREG_CMD_CR) && 3681 (ap->ap_active | ap->ap_sactive) != ap->ap_expired) { 3682 /* 3683 * If using FBSS or NCQ we can't safely stop the port 3684 * right now. 3685 */ 3686 kprintf("%s: Deferred timeout until its safe, slot %d\n", 3687 ATANAME(ap, at), ccb->ccb_slot); 3688 return; 3689 } 3690 3691 /* 3692 * We can safely stop the port and process all expired ccb's, 3693 * which will include our current ccb. 3694 */ 3695 ci_saved = (ap->ap_sactive) ? ahci_pread(ap, AHCI_PREG_SACT) : 3696 ahci_pread(ap, AHCI_PREG_CI); 3697 ahci_port_stop(ap, 0); 3698 3699 while (ap->ap_expired) { 3700 slot = ffs(ap->ap_expired) - 1; 3701 ap->ap_expired &= ~(1 << slot); 3702 ci_saved &= ~(1 << slot); 3703 ccb = &ap->ap_ccbs[slot]; 3704 ccb->ccb_xa.state = ATA_S_TIMEOUT; 3705 if (ccb->ccb_xa.flags & ATA_F_NCQ) { 3706 KKASSERT(ap->ap_sactive & (1 << slot)); 3707 ap->ap_sactive &= ~(1 << slot); 3708 } else { 3709 KKASSERT(ap->ap_active & (1 << slot)); 3710 ap->ap_active &= ~(1 << slot); 3711 --ap->ap_active_cnt; 3712 } 3713 ccb->ccb_done(ccb); 3714 ccb->ccb_xa.complete(&ccb->ccb_xa); 3715 } 3716 /* ccb invalid now */ 3717 3718 /* 3719 * We can safely CLO the port to clear any BSY/DRQ, a case which 3720 * can occur with port multipliers. This will unbrick the port 3721 * and allow commands to other targets behind the PM continue. 3722 * (FBSS). 3723 * 3724 * Finally, once the port has been restarted we can issue any 3725 * previously saved pending commands, and run the port interrupt 3726 * code to handle any completions which may have occured when 3727 * we saved CI. 3728 */ 3729 if (ahci_pread(ap, AHCI_PREG_TFD) & 3730 (AHCI_PREG_TFD_STS_BSY | AHCI_PREG_TFD_STS_DRQ)) { 3731 kprintf("%s: Warning, issuing CLO after timeout\n", 3732 ATANAME(ap, at)); 3733 ahci_port_clo(ap); 3734 } 3735 ahci_port_start(ap); 3736 3737 /* 3738 * We absolutely must make sure the chipset cleared activity on 3739 * all slots. This sometimes might not happen due to races with 3740 * a chipset interrupt which stops the port before we can manage 3741 * to. For some reason some chipsets don't clear the active 3742 * commands when we turn off CMD_ST after the chip has stopped 3743 * operations itself. 3744 */ 3745 if (ahci_pactive(ap) != 0) { 3746 ahci_port_stop(ap, 0); 3747 ahci_port_start(ap); 3748 if ((mask = ahci_pactive(ap)) != 0) { 3749 kprintf("%s: quick-timeout: chipset failed " 3750 "to clear active cmds %08x\n", 3751 PORTNAME(ap), mask); 3752 } 3753 } 3754 ahci_issue_saved_commands(ap, ci_saved & ~ap->ap_expired); 3755 ahci_issue_pending_commands(ap, NULL); 3756 ahci_port_intr(ap, 0); 3757 } 3758 3759 /* 3760 * Issue a previously saved set of commands 3761 */ 3762 void 3763 ahci_issue_saved_commands(struct ahci_port *ap, u_int32_t ci_saved) 3764 { 3765 if (ci_saved) { 3766 KKASSERT(!((ap->ap_active & ci_saved) && 3767 (ap->ap_sactive & ci_saved))); 3768 KKASSERT((ci_saved & ap->ap_expired) == 0); 3769 if (ap->ap_sactive & ci_saved) 3770 ahci_pwrite(ap, AHCI_PREG_SACT, ci_saved); 3771 ahci_pwrite(ap, AHCI_PREG_CI, ci_saved); 3772 } 3773 } 3774 3775 /* 3776 * Used by the softreset, pmprobe, and read_ncq_error only, in very 3777 * specialized, controlled circumstances. 3778 * 3779 * Only one command may be pending. 3780 */ 3781 void 3782 ahci_quick_timeout(struct ahci_ccb *ccb) 3783 { 3784 struct ahci_port *ap = ccb->ccb_port; 3785 u_int32_t mask; 3786 3787 switch (ccb->ccb_xa.state) { 3788 case ATA_S_PENDING: 3789 TAILQ_REMOVE(&ap->ap_ccb_pending, ccb, ccb_entry); 3790 ccb->ccb_xa.state = ATA_S_TIMEOUT; 3791 break; 3792 case ATA_S_ONCHIP: 3793 /* 3794 * We have to clear the command on-chip. 3795 */ 3796 KKASSERT(ap->ap_active == (1 << ccb->ccb_slot) && 3797 ap->ap_sactive == 0); 3798 ahci_port_stop(ap, 0); 3799 ahci_port_start(ap); 3800 if (ahci_pactive(ap) != 0) { 3801 ahci_port_stop(ap, 0); 3802 ahci_port_start(ap); 3803 if ((mask = ahci_pactive(ap)) != 0) { 3804 kprintf("%s: quick-timeout: chipset failed " 3805 "to clear active cmds %08x\n", 3806 PORTNAME(ap), mask); 3807 } 3808 } 3809 3810 ccb->ccb_xa.state = ATA_S_TIMEOUT; 3811 ap->ap_active &= ~(1 << ccb->ccb_slot); 3812 KKASSERT(ap->ap_active_cnt > 0); 3813 --ap->ap_active_cnt; 3814 break; 3815 default: 3816 panic("%s: ahci_quick_timeout: ccb in bad state %d", 3817 ATANAME(ap, ccb->ccb_xa.at), ccb->ccb_xa.state); 3818 } 3819 } 3820 3821 static void 3822 ahci_dummy_done(struct ata_xfer *xa) 3823 { 3824 } 3825 3826 static void 3827 ahci_empty_done(struct ahci_ccb *ccb) 3828 { 3829 } 3830 3831 int 3832 ahci_set_feature(struct ahci_port *ap, struct ata_port *atx, 3833 int feature, int enable) 3834 { 3835 struct ata_port *at; 3836 struct ata_xfer *xa; 3837 int error; 3838 3839 at = atx ? atx : ap->ap_ata[0]; 3840 3841 xa = ahci_ata_get_xfer(ap, atx); 3842 3843 xa->fis->type = ATA_FIS_TYPE_H2D; 3844 xa->fis->flags = ATA_H2D_FLAGS_CMD | at->at_target; 3845 xa->fis->command = ATA_C_SET_FEATURES; 3846 xa->fis->features = enable ? ATA_C_SATA_FEATURE_ENA : 3847 ATA_C_SATA_FEATURE_DIS; 3848 xa->fis->sector_count = feature; 3849 xa->fis->control = ATA_FIS_CONTROL_4BIT; 3850 3851 xa->complete = ahci_dummy_done; 3852 xa->datalen = 0; 3853 xa->flags = ATA_F_POLL; 3854 xa->timeout = 1000; 3855 3856 if (ahci_ata_cmd(xa) == ATA_S_COMPLETE) 3857 error = 0; 3858 else 3859 error = EIO; 3860 ahci_ata_put_xfer(xa); 3861 return(error); 3862 } 3863