1 /* $FreeBSD$ */ 2 3 /*- 4 * Copyright (c) 2006 5 * Damien Bergamini <damien.bergamini@free.fr> 6 * 7 * Permission to use, copy, modify, and distribute this software for any 8 * purpose with or without fee is hereby granted, provided that the above 9 * copyright notice and this permission notice appear in all copies. 10 * 11 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 12 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 13 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 14 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 15 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 16 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 17 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 18 */ 19 20 #include <sys/cdefs.h> 21 __FBSDID("$FreeBSD$"); 22 23 /*- 24 * Ralink Technology RT2561, RT2561S and RT2661 chipset driver 25 * http://www.ralinktech.com/ 26 */ 27 28 #include <sys/param.h> 29 #include <sys/sysctl.h> 30 #include <sys/sockio.h> 31 #include <sys/mbuf.h> 32 #include <sys/kernel.h> 33 #include <sys/socket.h> 34 #include <sys/systm.h> 35 #include <sys/malloc.h> 36 #include <sys/lock.h> 37 #include <sys/module.h> 38 #include <sys/bus.h> 39 #include <sys/endian.h> 40 #include <sys/firmware.h> 41 42 #if defined(__DragonFly__) 43 /* empty */ 44 #else 45 #include <machine/bus.h> 46 #include <machine/resource.h> 47 #endif 48 #include <sys/rman.h> 49 50 #include <net/bpf.h> 51 #include <net/if.h> 52 #include <net/if_var.h> 53 #include <net/if_arp.h> 54 #include <net/ethernet.h> 55 #include <net/if_dl.h> 56 #include <net/if_media.h> 57 #include <net/if_types.h> 58 59 #include <netproto/802_11/ieee80211_var.h> 60 #include <netproto/802_11/ieee80211_radiotap.h> 61 #include <netproto/802_11/ieee80211_regdomain.h> 62 #include <netproto/802_11/ieee80211_ratectl.h> 63 64 #include <netinet/in.h> 65 #include <netinet/in_systm.h> 66 #include <netinet/in_var.h> 67 #include <netinet/ip.h> 68 #include <netinet/if_ether.h> 69 70 #include <dev/netif/ral/rt2661reg.h> 71 #include <dev/netif/ral/rt2661var.h> 72 73 #define RAL_DEBUG 74 #ifdef RAL_DEBUG 75 #define DPRINTF(sc, fmt, ...) do { \ 76 if (sc->sc_debug > 0) \ 77 kprintf(fmt, __VA_ARGS__); \ 78 } while (0) 79 #define DPRINTFN(sc, n, fmt, ...) do { \ 80 if (sc->sc_debug >= (n)) \ 81 kprintf(fmt, __VA_ARGS__); \ 82 } while (0) 83 #else 84 #define DPRINTF(sc, fmt, ...) 85 #define DPRINTFN(sc, n, fmt, ...) 86 #endif 87 88 static struct ieee80211vap *rt2661_vap_create(struct ieee80211com *, 89 const char [IFNAMSIZ], int, enum ieee80211_opmode, 90 int, const uint8_t [IEEE80211_ADDR_LEN], 91 const uint8_t [IEEE80211_ADDR_LEN]); 92 static void rt2661_vap_delete(struct ieee80211vap *); 93 static void rt2661_dma_map_addr(void *, bus_dma_segment_t *, int, 94 int); 95 static int rt2661_alloc_tx_ring(struct rt2661_softc *, 96 struct rt2661_tx_ring *, int); 97 static void rt2661_reset_tx_ring(struct rt2661_softc *, 98 struct rt2661_tx_ring *); 99 static void rt2661_free_tx_ring(struct rt2661_softc *, 100 struct rt2661_tx_ring *); 101 static int rt2661_alloc_rx_ring(struct rt2661_softc *, 102 struct rt2661_rx_ring *, int); 103 static void rt2661_reset_rx_ring(struct rt2661_softc *, 104 struct rt2661_rx_ring *); 105 static void rt2661_free_rx_ring(struct rt2661_softc *, 106 struct rt2661_rx_ring *); 107 static int rt2661_newstate(struct ieee80211vap *, 108 enum ieee80211_state, int); 109 static uint16_t rt2661_eeprom_read(struct rt2661_softc *, uint8_t); 110 static void rt2661_rx_intr(struct rt2661_softc *); 111 static void rt2661_tx_intr(struct rt2661_softc *); 112 static void rt2661_tx_dma_intr(struct rt2661_softc *, 113 struct rt2661_tx_ring *); 114 static void rt2661_mcu_beacon_expire(struct rt2661_softc *); 115 static void rt2661_mcu_wakeup(struct rt2661_softc *); 116 static void rt2661_mcu_cmd_intr(struct rt2661_softc *); 117 static void rt2661_scan_start(struct ieee80211com *); 118 static void rt2661_scan_end(struct ieee80211com *); 119 static void rt2661_set_channel(struct ieee80211com *); 120 static void rt2661_setup_tx_desc(struct rt2661_softc *, 121 struct rt2661_tx_desc *, uint32_t, uint16_t, int, 122 int, const bus_dma_segment_t *, int, int); 123 static int rt2661_tx_data(struct rt2661_softc *, struct mbuf *, 124 struct ieee80211_node *, int); 125 static int rt2661_tx_mgt(struct rt2661_softc *, struct mbuf *, 126 struct ieee80211_node *); 127 static int rt2661_transmit(struct ieee80211com *, struct mbuf *); 128 static void rt2661_start(struct rt2661_softc *); 129 static int rt2661_raw_xmit(struct ieee80211_node *, struct mbuf *, 130 const struct ieee80211_bpf_params *); 131 static void rt2661_watchdog(void *); 132 static void rt2661_parent(struct ieee80211com *); 133 static void rt2661_bbp_write(struct rt2661_softc *, uint8_t, 134 uint8_t); 135 static uint8_t rt2661_bbp_read(struct rt2661_softc *, uint8_t); 136 static void rt2661_rf_write(struct rt2661_softc *, uint8_t, 137 uint32_t); 138 static int rt2661_tx_cmd(struct rt2661_softc *, uint8_t, 139 uint16_t); 140 static void rt2661_select_antenna(struct rt2661_softc *); 141 static void rt2661_enable_mrr(struct rt2661_softc *); 142 static void rt2661_set_txpreamble(struct rt2661_softc *); 143 static void rt2661_set_basicrates(struct rt2661_softc *, 144 const struct ieee80211_rateset *); 145 static void rt2661_select_band(struct rt2661_softc *, 146 struct ieee80211_channel *); 147 static void rt2661_set_chan(struct rt2661_softc *, 148 struct ieee80211_channel *); 149 static void rt2661_set_bssid(struct rt2661_softc *, 150 const uint8_t *); 151 static void rt2661_set_macaddr(struct rt2661_softc *, 152 const uint8_t *); 153 static void rt2661_update_promisc(struct ieee80211com *); 154 static int rt2661_wme_update(struct ieee80211com *) __unused; 155 static void rt2661_update_slot(struct ieee80211com *); 156 static const char *rt2661_get_rf(int); 157 static void rt2661_read_eeprom(struct rt2661_softc *, 158 uint8_t macaddr[IEEE80211_ADDR_LEN]); 159 static int rt2661_bbp_init(struct rt2661_softc *); 160 static void rt2661_init_locked(struct rt2661_softc *); 161 static void rt2661_init(void *); 162 static void rt2661_stop_locked(struct rt2661_softc *); 163 static void rt2661_stop(void *); 164 static int rt2661_load_microcode(struct rt2661_softc *); 165 #ifdef notyet 166 static void rt2661_rx_tune(struct rt2661_softc *); 167 static void rt2661_radar_start(struct rt2661_softc *); 168 static int rt2661_radar_stop(struct rt2661_softc *); 169 #endif 170 static int rt2661_prepare_beacon(struct rt2661_softc *, 171 struct ieee80211vap *); 172 static void rt2661_enable_tsf_sync(struct rt2661_softc *); 173 static void rt2661_enable_tsf(struct rt2661_softc *); 174 static int rt2661_get_rssi(struct rt2661_softc *, uint8_t); 175 176 static const struct { 177 uint32_t reg; 178 uint32_t val; 179 } rt2661_def_mac[] = { 180 RT2661_DEF_MAC 181 }; 182 183 static const struct { 184 uint8_t reg; 185 uint8_t val; 186 } rt2661_def_bbp[] = { 187 RT2661_DEF_BBP 188 }; 189 190 static const struct rfprog { 191 uint8_t chan; 192 uint32_t r1, r2, r3, r4; 193 } rt2661_rf5225_1[] = { 194 RT2661_RF5225_1 195 }, rt2661_rf5225_2[] = { 196 RT2661_RF5225_2 197 }; 198 199 int 200 rt2661_attach(device_t dev, int id) 201 { 202 struct rt2661_softc *sc = device_get_softc(dev); 203 struct ieee80211com *ic = &sc->sc_ic; 204 uint32_t val; 205 uint8_t bands[IEEE80211_MODE_BYTES]; 206 int error, ac, ntries; 207 208 sc->sc_id = id; 209 sc->sc_dev = dev; 210 211 #if defined(__DragonFly__) 212 lockinit(&sc->sc_mtx, device_get_nameunit(dev), 0, LK_CANRECURSE); 213 #else 214 mtx_init(&sc->sc_mtx, device_get_nameunit(dev), MTX_NETWORK_LOCK, 215 MTX_DEF | MTX_RECURSE); 216 #endif 217 218 callout_init_mtx(&sc->watchdog_ch, &sc->sc_mtx, 0); 219 mbufq_init(&sc->sc_snd, ifqmaxlen); 220 221 /* wait for NIC to initialize */ 222 for (ntries = 0; ntries < 1000; ntries++) { 223 if ((val = RAL_READ(sc, RT2661_MAC_CSR0)) != 0) 224 break; 225 DELAY(1000); 226 } 227 if (ntries == 1000) { 228 device_printf(sc->sc_dev, 229 "timeout waiting for NIC to initialize\n"); 230 error = EIO; 231 goto fail1; 232 } 233 234 /* retrieve RF rev. no and various other things from EEPROM */ 235 rt2661_read_eeprom(sc, ic->ic_macaddr); 236 237 device_printf(dev, "MAC/BBP RT%X, RF %s\n", val, 238 rt2661_get_rf(sc->rf_rev)); 239 240 /* 241 * Allocate Tx and Rx rings. 242 */ 243 for (ac = 0; ac < 4; ac++) { 244 error = rt2661_alloc_tx_ring(sc, &sc->txq[ac], 245 RT2661_TX_RING_COUNT); 246 if (error != 0) { 247 device_printf(sc->sc_dev, 248 "could not allocate Tx ring %d\n", ac); 249 goto fail2; 250 } 251 } 252 253 error = rt2661_alloc_tx_ring(sc, &sc->mgtq, RT2661_MGT_RING_COUNT); 254 if (error != 0) { 255 device_printf(sc->sc_dev, "could not allocate Mgt ring\n"); 256 goto fail2; 257 } 258 259 error = rt2661_alloc_rx_ring(sc, &sc->rxq, RT2661_RX_RING_COUNT); 260 if (error != 0) { 261 device_printf(sc->sc_dev, "could not allocate Rx ring\n"); 262 goto fail3; 263 } 264 265 ic->ic_softc = sc; 266 ic->ic_name = device_get_nameunit(dev); 267 ic->ic_opmode = IEEE80211_M_STA; 268 ic->ic_phytype = IEEE80211_T_OFDM; /* not only, but not used */ 269 270 /* set device capabilities */ 271 ic->ic_caps = 272 IEEE80211_C_STA /* station mode */ 273 | IEEE80211_C_IBSS /* ibss, nee adhoc, mode */ 274 | IEEE80211_C_HOSTAP /* hostap mode */ 275 | IEEE80211_C_MONITOR /* monitor mode */ 276 | IEEE80211_C_AHDEMO /* adhoc demo mode */ 277 | IEEE80211_C_WDS /* 4-address traffic works */ 278 | IEEE80211_C_MBSS /* mesh point link mode */ 279 | IEEE80211_C_SHPREAMBLE /* short preamble supported */ 280 | IEEE80211_C_SHSLOT /* short slot time supported */ 281 | IEEE80211_C_WPA /* capable of WPA1+WPA2 */ 282 | IEEE80211_C_BGSCAN /* capable of bg scanning */ 283 #ifdef notyet 284 | IEEE80211_C_TXFRAG /* handle tx frags */ 285 | IEEE80211_C_WME /* 802.11e */ 286 #endif 287 ; 288 289 memset(bands, 0, sizeof(bands)); 290 setbit(bands, IEEE80211_MODE_11B); 291 setbit(bands, IEEE80211_MODE_11G); 292 if (sc->rf_rev == RT2661_RF_5225 || sc->rf_rev == RT2661_RF_5325) 293 setbit(bands, IEEE80211_MODE_11A); 294 ieee80211_init_channels(ic, NULL, bands); 295 296 ieee80211_ifattach(ic); 297 #if 0 298 ic->ic_wme.wme_update = rt2661_wme_update; 299 #endif 300 ic->ic_scan_start = rt2661_scan_start; 301 ic->ic_scan_end = rt2661_scan_end; 302 ic->ic_set_channel = rt2661_set_channel; 303 ic->ic_updateslot = rt2661_update_slot; 304 ic->ic_update_promisc = rt2661_update_promisc; 305 ic->ic_raw_xmit = rt2661_raw_xmit; 306 ic->ic_transmit = rt2661_transmit; 307 ic->ic_parent = rt2661_parent; 308 ic->ic_vap_create = rt2661_vap_create; 309 ic->ic_vap_delete = rt2661_vap_delete; 310 311 ieee80211_radiotap_attach(ic, 312 &sc->sc_txtap.wt_ihdr, sizeof(sc->sc_txtap), 313 RT2661_TX_RADIOTAP_PRESENT, 314 &sc->sc_rxtap.wr_ihdr, sizeof(sc->sc_rxtap), 315 RT2661_RX_RADIOTAP_PRESENT); 316 317 #ifdef RAL_DEBUG 318 SYSCTL_ADD_INT(device_get_sysctl_ctx(dev), 319 SYSCTL_CHILDREN(device_get_sysctl_tree(dev)), OID_AUTO, 320 "debug", CTLFLAG_RW, &sc->sc_debug, 0, "debug msgs"); 321 #endif 322 if (bootverbose) 323 ieee80211_announce(ic); 324 325 return 0; 326 327 fail3: rt2661_free_tx_ring(sc, &sc->mgtq); 328 fail2: while (--ac >= 0) 329 rt2661_free_tx_ring(sc, &sc->txq[ac]); 330 #if defined(__DragonFly__) 331 fail1: lockuninit(&sc->sc_mtx); 332 #else 333 fail1: mtx_destroy(&sc->sc_mtx); 334 #endif 335 return error; 336 } 337 338 int 339 rt2661_detach(void *xsc) 340 { 341 struct rt2661_softc *sc = xsc; 342 struct ieee80211com *ic = &sc->sc_ic; 343 344 RAL_LOCK(sc); 345 rt2661_stop_locked(sc); 346 RAL_UNLOCK(sc); 347 348 ieee80211_ifdetach(ic); 349 mbufq_drain(&sc->sc_snd); 350 351 rt2661_free_tx_ring(sc, &sc->txq[0]); 352 rt2661_free_tx_ring(sc, &sc->txq[1]); 353 rt2661_free_tx_ring(sc, &sc->txq[2]); 354 rt2661_free_tx_ring(sc, &sc->txq[3]); 355 rt2661_free_tx_ring(sc, &sc->mgtq); 356 rt2661_free_rx_ring(sc, &sc->rxq); 357 358 #if defined(__DragonFly__) 359 lockuninit(&sc->sc_mtx); 360 #else 361 mtx_destroy(&sc->sc_mtx); 362 #endif 363 364 return 0; 365 } 366 367 static struct ieee80211vap * 368 rt2661_vap_create(struct ieee80211com *ic, const char name[IFNAMSIZ], int unit, 369 enum ieee80211_opmode opmode, int flags, 370 const uint8_t bssid[IEEE80211_ADDR_LEN], 371 const uint8_t mac[IEEE80211_ADDR_LEN]) 372 { 373 struct rt2661_softc *sc = ic->ic_softc; 374 struct rt2661_vap *rvp; 375 struct ieee80211vap *vap; 376 377 switch (opmode) { 378 case IEEE80211_M_STA: 379 case IEEE80211_M_IBSS: 380 case IEEE80211_M_AHDEMO: 381 case IEEE80211_M_MONITOR: 382 case IEEE80211_M_HOSTAP: 383 case IEEE80211_M_MBSS: 384 /* XXXRP: TBD */ 385 if (!TAILQ_EMPTY(&ic->ic_vaps)) { 386 device_printf(sc->sc_dev, "only 1 vap supported\n"); 387 return NULL; 388 } 389 if (opmode == IEEE80211_M_STA) 390 flags |= IEEE80211_CLONE_NOBEACONS; 391 break; 392 case IEEE80211_M_WDS: 393 if (TAILQ_EMPTY(&ic->ic_vaps) || 394 ic->ic_opmode != IEEE80211_M_HOSTAP) { 395 device_printf(sc->sc_dev, 396 "wds only supported in ap mode\n"); 397 return NULL; 398 } 399 /* 400 * Silently remove any request for a unique 401 * bssid; WDS vap's always share the local 402 * mac address. 403 */ 404 flags &= ~IEEE80211_CLONE_BSSID; 405 break; 406 default: 407 device_printf(sc->sc_dev, "unknown opmode %d\n", opmode); 408 return NULL; 409 } 410 rvp = kmalloc(sizeof(struct rt2661_vap), M_80211_VAP, M_WAITOK | M_ZERO); 411 vap = &rvp->ral_vap; 412 ieee80211_vap_setup(ic, vap, name, unit, opmode, flags, bssid); 413 414 /* override state transition machine */ 415 rvp->ral_newstate = vap->iv_newstate; 416 vap->iv_newstate = rt2661_newstate; 417 #if 0 418 vap->iv_update_beacon = rt2661_beacon_update; 419 #endif 420 421 ieee80211_ratectl_init(vap); 422 /* complete setup */ 423 ieee80211_vap_attach(vap, ieee80211_media_change, 424 ieee80211_media_status, mac); 425 if (TAILQ_FIRST(&ic->ic_vaps) == vap) 426 ic->ic_opmode = opmode; 427 return vap; 428 } 429 430 static void 431 rt2661_vap_delete(struct ieee80211vap *vap) 432 { 433 struct rt2661_vap *rvp = RT2661_VAP(vap); 434 435 ieee80211_ratectl_deinit(vap); 436 ieee80211_vap_detach(vap); 437 kfree(rvp, M_80211_VAP); 438 } 439 440 void 441 rt2661_shutdown(void *xsc) 442 { 443 struct rt2661_softc *sc = xsc; 444 445 rt2661_stop(sc); 446 } 447 448 void 449 rt2661_suspend(void *xsc) 450 { 451 struct rt2661_softc *sc = xsc; 452 453 rt2661_stop(sc); 454 } 455 456 void 457 rt2661_resume(void *xsc) 458 { 459 struct rt2661_softc *sc = xsc; 460 461 if (sc->sc_ic.ic_nrunning > 0) 462 rt2661_init(sc); 463 } 464 465 static void 466 rt2661_dma_map_addr(void *arg, bus_dma_segment_t *segs, int nseg, int error) 467 { 468 if (error != 0) 469 return; 470 471 KASSERT(nseg == 1, ("too many DMA segments, %d should be 1", nseg)); 472 473 *(bus_addr_t *)arg = segs[0].ds_addr; 474 } 475 476 static int 477 rt2661_alloc_tx_ring(struct rt2661_softc *sc, struct rt2661_tx_ring *ring, 478 int count) 479 { 480 int i, error; 481 482 ring->count = count; 483 ring->queued = 0; 484 ring->cur = ring->next = ring->stat = 0; 485 486 #if defined(__DragonFly__) 487 error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), 4, 0, 488 BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, 489 count * RT2661_TX_DESC_SIZE, 1, count * RT2661_TX_DESC_SIZE, 490 0, &ring->desc_dmat); 491 #else 492 error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), 4, 0, 493 BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, 494 count * RT2661_TX_DESC_SIZE, 1, count * RT2661_TX_DESC_SIZE, 495 0, NULL, NULL, &ring->desc_dmat); 496 #endif 497 if (error != 0) { 498 device_printf(sc->sc_dev, "could not create desc DMA tag\n"); 499 goto fail; 500 } 501 502 error = bus_dmamem_alloc(ring->desc_dmat, (void **)&ring->desc, 503 BUS_DMA_NOWAIT | BUS_DMA_ZERO, &ring->desc_map); 504 if (error != 0) { 505 device_printf(sc->sc_dev, "could not allocate DMA memory\n"); 506 goto fail; 507 } 508 509 error = bus_dmamap_load(ring->desc_dmat, ring->desc_map, ring->desc, 510 count * RT2661_TX_DESC_SIZE, rt2661_dma_map_addr, &ring->physaddr, 511 0); 512 if (error != 0) { 513 device_printf(sc->sc_dev, "could not load desc DMA map\n"); 514 goto fail; 515 } 516 517 ring->data = kmalloc(count * sizeof (struct rt2661_tx_data), M_DEVBUF, 518 M_INTWAIT | M_ZERO); 519 if (ring->data == NULL) { 520 device_printf(sc->sc_dev, "could not allocate soft data\n"); 521 error = ENOMEM; 522 goto fail; 523 } 524 525 #if defined(__DragonFly__) 526 error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), 4, 0, 527 BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, MCLBYTES, 528 RT2661_MAX_SCATTER, MCLBYTES, 0, &ring->data_dmat); 529 #else 530 error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), 1, 0, 531 BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, MCLBYTES, 532 RT2661_MAX_SCATTER, MCLBYTES, 0, NULL, NULL, &ring->data_dmat); 533 #endif 534 if (error != 0) { 535 device_printf(sc->sc_dev, "could not create data DMA tag\n"); 536 goto fail; 537 } 538 539 for (i = 0; i < count; i++) { 540 error = bus_dmamap_create(ring->data_dmat, 0, 541 &ring->data[i].map); 542 if (error != 0) { 543 device_printf(sc->sc_dev, "could not create DMA map\n"); 544 goto fail; 545 } 546 } 547 548 return 0; 549 550 fail: rt2661_free_tx_ring(sc, ring); 551 return error; 552 } 553 554 static void 555 rt2661_reset_tx_ring(struct rt2661_softc *sc, struct rt2661_tx_ring *ring) 556 { 557 struct rt2661_tx_desc *desc; 558 struct rt2661_tx_data *data; 559 int i; 560 561 for (i = 0; i < ring->count; i++) { 562 desc = &ring->desc[i]; 563 data = &ring->data[i]; 564 565 if (data->m != NULL) { 566 bus_dmamap_sync(ring->data_dmat, data->map, 567 BUS_DMASYNC_POSTWRITE); 568 bus_dmamap_unload(ring->data_dmat, data->map); 569 m_freem(data->m); 570 data->m = NULL; 571 } 572 573 if (data->ni != NULL) { 574 ieee80211_free_node(data->ni); 575 data->ni = NULL; 576 } 577 578 desc->flags = 0; 579 } 580 581 bus_dmamap_sync(ring->desc_dmat, ring->desc_map, BUS_DMASYNC_PREWRITE); 582 583 ring->queued = 0; 584 ring->cur = ring->next = ring->stat = 0; 585 } 586 587 static void 588 rt2661_free_tx_ring(struct rt2661_softc *sc, struct rt2661_tx_ring *ring) 589 { 590 struct rt2661_tx_data *data; 591 int i; 592 593 if (ring->desc != NULL) { 594 bus_dmamap_sync(ring->desc_dmat, ring->desc_map, 595 BUS_DMASYNC_POSTWRITE); 596 bus_dmamap_unload(ring->desc_dmat, ring->desc_map); 597 bus_dmamem_free(ring->desc_dmat, ring->desc, ring->desc_map); 598 } 599 600 if (ring->desc_dmat != NULL) 601 bus_dma_tag_destroy(ring->desc_dmat); 602 603 if (ring->data != NULL) { 604 for (i = 0; i < ring->count; i++) { 605 data = &ring->data[i]; 606 607 if (data->m != NULL) { 608 bus_dmamap_sync(ring->data_dmat, data->map, 609 BUS_DMASYNC_POSTWRITE); 610 bus_dmamap_unload(ring->data_dmat, data->map); 611 m_freem(data->m); 612 } 613 614 if (data->ni != NULL) 615 ieee80211_free_node(data->ni); 616 617 if (data->map != NULL) 618 bus_dmamap_destroy(ring->data_dmat, data->map); 619 } 620 621 kfree(ring->data, M_DEVBUF); 622 } 623 624 if (ring->data_dmat != NULL) 625 bus_dma_tag_destroy(ring->data_dmat); 626 } 627 628 static int 629 rt2661_alloc_rx_ring(struct rt2661_softc *sc, struct rt2661_rx_ring *ring, 630 int count) 631 { 632 struct rt2661_rx_desc *desc; 633 struct rt2661_rx_data *data; 634 bus_addr_t physaddr; 635 int i, error; 636 637 ring->count = count; 638 ring->cur = ring->next = 0; 639 640 #if defined(__DragonFly__) 641 error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), 4, 0, 642 BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, 643 count * RT2661_RX_DESC_SIZE, 1, count * RT2661_RX_DESC_SIZE, 644 0, &ring->desc_dmat); 645 #else 646 error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), 4, 0, 647 BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, 648 count * RT2661_RX_DESC_SIZE, 1, count * RT2661_RX_DESC_SIZE, 649 0, NULL, NULL, &ring->desc_dmat); 650 #endif 651 if (error != 0) { 652 device_printf(sc->sc_dev, "could not create desc DMA tag\n"); 653 goto fail; 654 } 655 656 error = bus_dmamem_alloc(ring->desc_dmat, (void **)&ring->desc, 657 BUS_DMA_NOWAIT | BUS_DMA_ZERO, &ring->desc_map); 658 if (error != 0) { 659 device_printf(sc->sc_dev, "could not allocate DMA memory\n"); 660 goto fail; 661 } 662 663 error = bus_dmamap_load(ring->desc_dmat, ring->desc_map, ring->desc, 664 count * RT2661_RX_DESC_SIZE, rt2661_dma_map_addr, &ring->physaddr, 665 0); 666 if (error != 0) { 667 device_printf(sc->sc_dev, "could not load desc DMA map\n"); 668 goto fail; 669 } 670 671 ring->data = kmalloc(count * sizeof (struct rt2661_rx_data), M_DEVBUF, 672 M_INTWAIT | M_ZERO); 673 if (ring->data == NULL) { 674 device_printf(sc->sc_dev, "could not allocate soft data\n"); 675 error = ENOMEM; 676 goto fail; 677 } 678 679 /* 680 * Pre-allocate Rx buffers and populate Rx ring. 681 */ 682 #if defined(__DragonFly__) 683 error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), 4, 0, 684 BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, MCLBYTES, 685 1, MCLBYTES, 0, &ring->data_dmat); 686 #else 687 error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), 1, 0, 688 BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, MCLBYTES, 689 1, MCLBYTES, 0, NULL, NULL, &ring->data_dmat); 690 #endif 691 if (error != 0) { 692 device_printf(sc->sc_dev, "could not create data DMA tag\n"); 693 goto fail; 694 } 695 696 for (i = 0; i < count; i++) { 697 desc = &sc->rxq.desc[i]; 698 data = &sc->rxq.data[i]; 699 700 error = bus_dmamap_create(ring->data_dmat, 0, &data->map); 701 if (error != 0) { 702 device_printf(sc->sc_dev, "could not create DMA map\n"); 703 goto fail; 704 } 705 706 data->m = m_getcl(M_NOWAIT, MT_DATA, M_PKTHDR); 707 if (data->m == NULL) { 708 device_printf(sc->sc_dev, 709 "could not allocate rx mbuf\n"); 710 error = ENOMEM; 711 goto fail; 712 } 713 714 error = bus_dmamap_load(ring->data_dmat, data->map, 715 mtod(data->m, void *), MCLBYTES, rt2661_dma_map_addr, 716 &physaddr, 0); 717 if (error != 0) { 718 device_printf(sc->sc_dev, 719 "could not load rx buf DMA map"); 720 goto fail; 721 } 722 723 desc->flags = htole32(RT2661_RX_BUSY); 724 desc->physaddr = htole32(physaddr); 725 } 726 727 bus_dmamap_sync(ring->desc_dmat, ring->desc_map, BUS_DMASYNC_PREWRITE); 728 729 return 0; 730 731 fail: rt2661_free_rx_ring(sc, ring); 732 return error; 733 } 734 735 static void 736 rt2661_reset_rx_ring(struct rt2661_softc *sc, struct rt2661_rx_ring *ring) 737 { 738 int i; 739 740 for (i = 0; i < ring->count; i++) 741 ring->desc[i].flags = htole32(RT2661_RX_BUSY); 742 743 bus_dmamap_sync(ring->desc_dmat, ring->desc_map, BUS_DMASYNC_PREWRITE); 744 745 ring->cur = ring->next = 0; 746 } 747 748 static void 749 rt2661_free_rx_ring(struct rt2661_softc *sc, struct rt2661_rx_ring *ring) 750 { 751 struct rt2661_rx_data *data; 752 int i; 753 754 if (ring->desc != NULL) { 755 bus_dmamap_sync(ring->desc_dmat, ring->desc_map, 756 BUS_DMASYNC_POSTWRITE); 757 bus_dmamap_unload(ring->desc_dmat, ring->desc_map); 758 bus_dmamem_free(ring->desc_dmat, ring->desc, ring->desc_map); 759 } 760 761 if (ring->desc_dmat != NULL) 762 bus_dma_tag_destroy(ring->desc_dmat); 763 764 if (ring->data != NULL) { 765 for (i = 0; i < ring->count; i++) { 766 data = &ring->data[i]; 767 768 if (data->m != NULL) { 769 bus_dmamap_sync(ring->data_dmat, data->map, 770 BUS_DMASYNC_POSTREAD); 771 bus_dmamap_unload(ring->data_dmat, data->map); 772 m_freem(data->m); 773 } 774 775 if (data->map != NULL) 776 bus_dmamap_destroy(ring->data_dmat, data->map); 777 } 778 779 kfree(ring->data, M_DEVBUF); 780 } 781 782 if (ring->data_dmat != NULL) 783 bus_dma_tag_destroy(ring->data_dmat); 784 } 785 786 static int 787 rt2661_newstate(struct ieee80211vap *vap, enum ieee80211_state nstate, int arg) 788 { 789 struct rt2661_vap *rvp = RT2661_VAP(vap); 790 struct ieee80211com *ic = vap->iv_ic; 791 struct rt2661_softc *sc = ic->ic_softc; 792 int error; 793 794 if (nstate == IEEE80211_S_INIT && vap->iv_state == IEEE80211_S_RUN) { 795 uint32_t tmp; 796 797 /* abort TSF synchronization */ 798 tmp = RAL_READ(sc, RT2661_TXRX_CSR9); 799 RAL_WRITE(sc, RT2661_TXRX_CSR9, tmp & ~0x00ffffff); 800 } 801 802 error = rvp->ral_newstate(vap, nstate, arg); 803 804 if (error == 0 && nstate == IEEE80211_S_RUN) { 805 struct ieee80211_node *ni = vap->iv_bss; 806 807 if (vap->iv_opmode != IEEE80211_M_MONITOR) { 808 rt2661_enable_mrr(sc); 809 rt2661_set_txpreamble(sc); 810 rt2661_set_basicrates(sc, &ni->ni_rates); 811 rt2661_set_bssid(sc, ni->ni_bssid); 812 } 813 814 if (vap->iv_opmode == IEEE80211_M_HOSTAP || 815 vap->iv_opmode == IEEE80211_M_IBSS || 816 vap->iv_opmode == IEEE80211_M_MBSS) { 817 error = rt2661_prepare_beacon(sc, vap); 818 if (error != 0) 819 return error; 820 } 821 if (vap->iv_opmode != IEEE80211_M_MONITOR) 822 rt2661_enable_tsf_sync(sc); 823 else 824 rt2661_enable_tsf(sc); 825 } 826 return error; 827 } 828 829 /* 830 * Read 16 bits at address 'addr' from the serial EEPROM (either 93C46 or 831 * 93C66). 832 */ 833 static uint16_t 834 rt2661_eeprom_read(struct rt2661_softc *sc, uint8_t addr) 835 { 836 uint32_t tmp; 837 uint16_t val; 838 int n; 839 840 /* clock C once before the first command */ 841 RT2661_EEPROM_CTL(sc, 0); 842 843 RT2661_EEPROM_CTL(sc, RT2661_S); 844 RT2661_EEPROM_CTL(sc, RT2661_S | RT2661_C); 845 RT2661_EEPROM_CTL(sc, RT2661_S); 846 847 /* write start bit (1) */ 848 RT2661_EEPROM_CTL(sc, RT2661_S | RT2661_D); 849 RT2661_EEPROM_CTL(sc, RT2661_S | RT2661_D | RT2661_C); 850 851 /* write READ opcode (10) */ 852 RT2661_EEPROM_CTL(sc, RT2661_S | RT2661_D); 853 RT2661_EEPROM_CTL(sc, RT2661_S | RT2661_D | RT2661_C); 854 RT2661_EEPROM_CTL(sc, RT2661_S); 855 RT2661_EEPROM_CTL(sc, RT2661_S | RT2661_C); 856 857 /* write address (A5-A0 or A7-A0) */ 858 n = (RAL_READ(sc, RT2661_E2PROM_CSR) & RT2661_93C46) ? 5 : 7; 859 for (; n >= 0; n--) { 860 RT2661_EEPROM_CTL(sc, RT2661_S | 861 (((addr >> n) & 1) << RT2661_SHIFT_D)); 862 RT2661_EEPROM_CTL(sc, RT2661_S | 863 (((addr >> n) & 1) << RT2661_SHIFT_D) | RT2661_C); 864 } 865 866 RT2661_EEPROM_CTL(sc, RT2661_S); 867 868 /* read data Q15-Q0 */ 869 val = 0; 870 for (n = 15; n >= 0; n--) { 871 RT2661_EEPROM_CTL(sc, RT2661_S | RT2661_C); 872 tmp = RAL_READ(sc, RT2661_E2PROM_CSR); 873 val |= ((tmp & RT2661_Q) >> RT2661_SHIFT_Q) << n; 874 RT2661_EEPROM_CTL(sc, RT2661_S); 875 } 876 877 RT2661_EEPROM_CTL(sc, 0); 878 879 /* clear Chip Select and clock C */ 880 RT2661_EEPROM_CTL(sc, RT2661_S); 881 RT2661_EEPROM_CTL(sc, 0); 882 RT2661_EEPROM_CTL(sc, RT2661_C); 883 884 return val; 885 } 886 887 static void 888 rt2661_tx_intr(struct rt2661_softc *sc) 889 { 890 struct rt2661_tx_ring *txq; 891 struct rt2661_tx_data *data; 892 uint32_t val; 893 int error, qid, retrycnt; 894 struct ieee80211vap *vap; 895 896 for (;;) { 897 struct ieee80211_node *ni; 898 struct mbuf *m; 899 900 val = RAL_READ(sc, RT2661_STA_CSR4); 901 if (!(val & RT2661_TX_STAT_VALID)) 902 break; 903 904 /* retrieve the queue in which this frame was sent */ 905 qid = RT2661_TX_QID(val); 906 txq = (qid <= 3) ? &sc->txq[qid] : &sc->mgtq; 907 908 /* retrieve rate control algorithm context */ 909 data = &txq->data[txq->stat]; 910 m = data->m; 911 data->m = NULL; 912 ni = data->ni; 913 data->ni = NULL; 914 915 /* if no frame has been sent, ignore */ 916 if (ni == NULL) 917 continue; 918 else 919 vap = ni->ni_vap; 920 921 switch (RT2661_TX_RESULT(val)) { 922 case RT2661_TX_SUCCESS: 923 retrycnt = RT2661_TX_RETRYCNT(val); 924 925 DPRINTFN(sc, 10, "data frame sent successfully after " 926 "%d retries\n", retrycnt); 927 if (data->rix != IEEE80211_FIXED_RATE_NONE) 928 ieee80211_ratectl_tx_complete(vap, ni, 929 IEEE80211_RATECTL_TX_SUCCESS, 930 &retrycnt, NULL); 931 error = 0; 932 break; 933 934 case RT2661_TX_RETRY_FAIL: 935 retrycnt = RT2661_TX_RETRYCNT(val); 936 937 DPRINTFN(sc, 9, "%s\n", 938 "sending data frame failed (too much retries)"); 939 if (data->rix != IEEE80211_FIXED_RATE_NONE) 940 ieee80211_ratectl_tx_complete(vap, ni, 941 IEEE80211_RATECTL_TX_FAILURE, 942 &retrycnt, NULL); 943 error = 1; 944 break; 945 946 default: 947 /* other failure */ 948 device_printf(sc->sc_dev, 949 "sending data frame failed 0x%08x\n", val); 950 error = 1; 951 } 952 953 DPRINTFN(sc, 15, "tx done q=%d idx=%u\n", qid, txq->stat); 954 955 txq->queued--; 956 if (++txq->stat >= txq->count) /* faster than % count */ 957 txq->stat = 0; 958 959 ieee80211_tx_complete(ni, m, error); 960 } 961 962 sc->sc_tx_timer = 0; 963 964 rt2661_start(sc); 965 } 966 967 static void 968 rt2661_tx_dma_intr(struct rt2661_softc *sc, struct rt2661_tx_ring *txq) 969 { 970 struct rt2661_tx_desc *desc; 971 struct rt2661_tx_data *data; 972 973 bus_dmamap_sync(txq->desc_dmat, txq->desc_map, BUS_DMASYNC_POSTREAD); 974 975 for (;;) { 976 desc = &txq->desc[txq->next]; 977 data = &txq->data[txq->next]; 978 979 if ((le32toh(desc->flags) & RT2661_TX_BUSY) || 980 !(le32toh(desc->flags) & RT2661_TX_VALID)) 981 break; 982 983 bus_dmamap_sync(txq->data_dmat, data->map, 984 BUS_DMASYNC_POSTWRITE); 985 bus_dmamap_unload(txq->data_dmat, data->map); 986 987 /* descriptor is no longer valid */ 988 desc->flags &= ~htole32(RT2661_TX_VALID); 989 990 DPRINTFN(sc, 15, "tx dma done q=%p idx=%u\n", txq, txq->next); 991 992 if (++txq->next >= txq->count) /* faster than % count */ 993 txq->next = 0; 994 } 995 996 bus_dmamap_sync(txq->desc_dmat, txq->desc_map, BUS_DMASYNC_PREWRITE); 997 } 998 999 static void 1000 rt2661_rx_intr(struct rt2661_softc *sc) 1001 { 1002 struct ieee80211com *ic = &sc->sc_ic; 1003 struct rt2661_rx_desc *desc; 1004 struct rt2661_rx_data *data; 1005 bus_addr_t physaddr; 1006 struct ieee80211_frame *wh; 1007 struct ieee80211_node *ni; 1008 struct mbuf *mnew, *m; 1009 int error; 1010 1011 bus_dmamap_sync(sc->rxq.desc_dmat, sc->rxq.desc_map, 1012 BUS_DMASYNC_POSTREAD); 1013 1014 for (;;) { 1015 int8_t rssi, nf; 1016 1017 desc = &sc->rxq.desc[sc->rxq.cur]; 1018 data = &sc->rxq.data[sc->rxq.cur]; 1019 1020 if (le32toh(desc->flags) & RT2661_RX_BUSY) 1021 break; 1022 1023 if ((le32toh(desc->flags) & RT2661_RX_PHY_ERROR) || 1024 (le32toh(desc->flags) & RT2661_RX_CRC_ERROR)) { 1025 /* 1026 * This should not happen since we did not request 1027 * to receive those frames when we filled TXRX_CSR0. 1028 */ 1029 DPRINTFN(sc, 5, "PHY or CRC error flags 0x%08x\n", 1030 le32toh(desc->flags)); 1031 #if defined(__DragonFly__) 1032 /* not implemented */ 1033 #else 1034 counter_u64_add(ic->ic_ierrors, 1); 1035 #endif 1036 goto skip; 1037 } 1038 1039 if ((le32toh(desc->flags) & RT2661_RX_CIPHER_MASK) != 0) { 1040 #if defined(__DragonFly__) 1041 /* not implemented */ 1042 #else 1043 counter_u64_add(ic->ic_ierrors, 1); 1044 #endif 1045 goto skip; 1046 } 1047 1048 /* 1049 * Try to allocate a new mbuf for this ring element and load it 1050 * before processing the current mbuf. If the ring element 1051 * cannot be loaded, drop the received packet and reuse the old 1052 * mbuf. In the unlikely case that the old mbuf can't be 1053 * reloaded either, explicitly panic. 1054 */ 1055 mnew = m_getcl(M_NOWAIT, MT_DATA, M_PKTHDR); 1056 if (mnew == NULL) { 1057 #if defined(__DragonFly__) 1058 /* not implemented */ 1059 #else 1060 counter_u64_add(ic->ic_ierrors, 1); 1061 #endif 1062 goto skip; 1063 } 1064 1065 bus_dmamap_sync(sc->rxq.data_dmat, data->map, 1066 BUS_DMASYNC_POSTREAD); 1067 bus_dmamap_unload(sc->rxq.data_dmat, data->map); 1068 1069 error = bus_dmamap_load(sc->rxq.data_dmat, data->map, 1070 mtod(mnew, void *), MCLBYTES, rt2661_dma_map_addr, 1071 &physaddr, 0); 1072 if (error != 0) { 1073 m_freem(mnew); 1074 1075 /* try to reload the old mbuf */ 1076 error = bus_dmamap_load(sc->rxq.data_dmat, data->map, 1077 mtod(data->m, void *), MCLBYTES, 1078 rt2661_dma_map_addr, &physaddr, 0); 1079 if (error != 0) { 1080 /* very unlikely that it will fail... */ 1081 panic("%s: could not load old rx mbuf", 1082 device_get_name(sc->sc_dev)); 1083 } 1084 #if defined(__DragonFly__) 1085 /* not implemented */ 1086 #else 1087 counter_u64_add(ic->ic_ierrors, 1); 1088 #endif 1089 goto skip; 1090 } 1091 1092 /* 1093 * New mbuf successfully loaded, update Rx ring and continue 1094 * processing. 1095 */ 1096 m = data->m; 1097 data->m = mnew; 1098 desc->physaddr = htole32(physaddr); 1099 1100 /* finalize mbuf */ 1101 m->m_pkthdr.len = m->m_len = 1102 (le32toh(desc->flags) >> 16) & 0xfff; 1103 1104 rssi = rt2661_get_rssi(sc, desc->rssi); 1105 /* Error happened during RSSI conversion. */ 1106 if (rssi < 0) 1107 rssi = -30; /* XXX ignored by net80211 */ 1108 nf = RT2661_NOISE_FLOOR; 1109 1110 if (ieee80211_radiotap_active(ic)) { 1111 struct rt2661_rx_radiotap_header *tap = &sc->sc_rxtap; 1112 uint32_t tsf_lo, tsf_hi; 1113 1114 /* get timestamp (low and high 32 bits) */ 1115 tsf_hi = RAL_READ(sc, RT2661_TXRX_CSR13); 1116 tsf_lo = RAL_READ(sc, RT2661_TXRX_CSR12); 1117 1118 tap->wr_tsf = 1119 htole64(((uint64_t)tsf_hi << 32) | tsf_lo); 1120 tap->wr_flags = 0; 1121 tap->wr_rate = ieee80211_plcp2rate(desc->rate, 1122 (desc->flags & htole32(RT2661_RX_OFDM)) ? 1123 IEEE80211_T_OFDM : IEEE80211_T_CCK); 1124 tap->wr_antsignal = nf + rssi; 1125 tap->wr_antnoise = nf; 1126 } 1127 sc->sc_flags |= RAL_INPUT_RUNNING; 1128 RAL_UNLOCK(sc); 1129 wh = mtod(m, struct ieee80211_frame *); 1130 1131 /* send the frame to the 802.11 layer */ 1132 ni = ieee80211_find_rxnode(ic, 1133 (struct ieee80211_frame_min *)wh); 1134 if (ni != NULL) { 1135 (void) ieee80211_input(ni, m, rssi, nf); 1136 ieee80211_free_node(ni); 1137 } else 1138 (void) ieee80211_input_all(ic, m, rssi, nf); 1139 1140 RAL_LOCK(sc); 1141 sc->sc_flags &= ~RAL_INPUT_RUNNING; 1142 1143 skip: desc->flags |= htole32(RT2661_RX_BUSY); 1144 1145 DPRINTFN(sc, 15, "rx intr idx=%u\n", sc->rxq.cur); 1146 1147 sc->rxq.cur = (sc->rxq.cur + 1) % RT2661_RX_RING_COUNT; 1148 } 1149 1150 bus_dmamap_sync(sc->rxq.desc_dmat, sc->rxq.desc_map, 1151 BUS_DMASYNC_PREWRITE); 1152 } 1153 1154 /* ARGSUSED */ 1155 static void 1156 rt2661_mcu_beacon_expire(struct rt2661_softc *sc) 1157 { 1158 /* do nothing */ 1159 } 1160 1161 static void 1162 rt2661_mcu_wakeup(struct rt2661_softc *sc) 1163 { 1164 RAL_WRITE(sc, RT2661_MAC_CSR11, 5 << 16); 1165 1166 RAL_WRITE(sc, RT2661_SOFT_RESET_CSR, 0x7); 1167 RAL_WRITE(sc, RT2661_IO_CNTL_CSR, 0x18); 1168 RAL_WRITE(sc, RT2661_PCI_USEC_CSR, 0x20); 1169 1170 /* send wakeup command to MCU */ 1171 rt2661_tx_cmd(sc, RT2661_MCU_CMD_WAKEUP, 0); 1172 } 1173 1174 static void 1175 rt2661_mcu_cmd_intr(struct rt2661_softc *sc) 1176 { 1177 RAL_READ(sc, RT2661_M2H_CMD_DONE_CSR); 1178 RAL_WRITE(sc, RT2661_M2H_CMD_DONE_CSR, 0xffffffff); 1179 } 1180 1181 void 1182 rt2661_intr(void *arg) 1183 { 1184 struct rt2661_softc *sc = arg; 1185 uint32_t r1, r2; 1186 1187 RAL_LOCK(sc); 1188 1189 /* disable MAC and MCU interrupts */ 1190 RAL_WRITE(sc, RT2661_INT_MASK_CSR, 0xffffff7f); 1191 RAL_WRITE(sc, RT2661_MCU_INT_MASK_CSR, 0xffffffff); 1192 1193 /* don't re-enable interrupts if we're shutting down */ 1194 if (!(sc->sc_flags & RAL_RUNNING)) { 1195 RAL_UNLOCK(sc); 1196 return; 1197 } 1198 1199 r1 = RAL_READ(sc, RT2661_INT_SOURCE_CSR); 1200 RAL_WRITE(sc, RT2661_INT_SOURCE_CSR, r1); 1201 1202 r2 = RAL_READ(sc, RT2661_MCU_INT_SOURCE_CSR); 1203 RAL_WRITE(sc, RT2661_MCU_INT_SOURCE_CSR, r2); 1204 1205 if (r1 & RT2661_MGT_DONE) 1206 rt2661_tx_dma_intr(sc, &sc->mgtq); 1207 1208 if (r1 & RT2661_RX_DONE) 1209 rt2661_rx_intr(sc); 1210 1211 if (r1 & RT2661_TX0_DMA_DONE) 1212 rt2661_tx_dma_intr(sc, &sc->txq[0]); 1213 1214 if (r1 & RT2661_TX1_DMA_DONE) 1215 rt2661_tx_dma_intr(sc, &sc->txq[1]); 1216 1217 if (r1 & RT2661_TX2_DMA_DONE) 1218 rt2661_tx_dma_intr(sc, &sc->txq[2]); 1219 1220 if (r1 & RT2661_TX3_DMA_DONE) 1221 rt2661_tx_dma_intr(sc, &sc->txq[3]); 1222 1223 if (r1 & RT2661_TX_DONE) 1224 rt2661_tx_intr(sc); 1225 1226 if (r2 & RT2661_MCU_CMD_DONE) 1227 rt2661_mcu_cmd_intr(sc); 1228 1229 if (r2 & RT2661_MCU_BEACON_EXPIRE) 1230 rt2661_mcu_beacon_expire(sc); 1231 1232 if (r2 & RT2661_MCU_WAKEUP) 1233 rt2661_mcu_wakeup(sc); 1234 1235 /* re-enable MAC and MCU interrupts */ 1236 RAL_WRITE(sc, RT2661_INT_MASK_CSR, 0x0000ff10); 1237 RAL_WRITE(sc, RT2661_MCU_INT_MASK_CSR, 0); 1238 1239 RAL_UNLOCK(sc); 1240 } 1241 1242 static uint8_t 1243 rt2661_plcp_signal(int rate) 1244 { 1245 switch (rate) { 1246 /* OFDM rates (cf IEEE Std 802.11a-1999, pp. 14 Table 80) */ 1247 case 12: return 0xb; 1248 case 18: return 0xf; 1249 case 24: return 0xa; 1250 case 36: return 0xe; 1251 case 48: return 0x9; 1252 case 72: return 0xd; 1253 case 96: return 0x8; 1254 case 108: return 0xc; 1255 1256 /* CCK rates (NB: not IEEE std, device-specific) */ 1257 case 2: return 0x0; 1258 case 4: return 0x1; 1259 case 11: return 0x2; 1260 case 22: return 0x3; 1261 } 1262 return 0xff; /* XXX unsupported/unknown rate */ 1263 } 1264 1265 static void 1266 rt2661_setup_tx_desc(struct rt2661_softc *sc, struct rt2661_tx_desc *desc, 1267 uint32_t flags, uint16_t xflags, int len, int rate, 1268 const bus_dma_segment_t *segs, int nsegs, int ac) 1269 { 1270 struct ieee80211com *ic = &sc->sc_ic; 1271 uint16_t plcp_length; 1272 int i, remainder; 1273 1274 desc->flags = htole32(flags); 1275 desc->flags |= htole32(len << 16); 1276 desc->flags |= htole32(RT2661_TX_BUSY | RT2661_TX_VALID); 1277 1278 desc->xflags = htole16(xflags); 1279 desc->xflags |= htole16(nsegs << 13); 1280 1281 desc->wme = htole16( 1282 RT2661_QID(ac) | 1283 RT2661_AIFSN(2) | 1284 RT2661_LOGCWMIN(4) | 1285 RT2661_LOGCWMAX(10)); 1286 1287 /* 1288 * Remember in which queue this frame was sent. This field is driver 1289 * private data only. It will be made available by the NIC in STA_CSR4 1290 * on Tx interrupts. 1291 */ 1292 desc->qid = ac; 1293 1294 /* setup PLCP fields */ 1295 desc->plcp_signal = rt2661_plcp_signal(rate); 1296 desc->plcp_service = 4; 1297 1298 len += IEEE80211_CRC_LEN; 1299 if (ieee80211_rate2phytype(ic->ic_rt, rate) == IEEE80211_T_OFDM) { 1300 desc->flags |= htole32(RT2661_TX_OFDM); 1301 1302 plcp_length = len & 0xfff; 1303 desc->plcp_length_hi = plcp_length >> 6; 1304 desc->plcp_length_lo = plcp_length & 0x3f; 1305 } else { 1306 plcp_length = howmany(16 * len, rate); 1307 if (rate == 22) { 1308 remainder = (16 * len) % 22; 1309 if (remainder != 0 && remainder < 7) 1310 desc->plcp_service |= RT2661_PLCP_LENGEXT; 1311 } 1312 desc->plcp_length_hi = plcp_length >> 8; 1313 desc->plcp_length_lo = plcp_length & 0xff; 1314 1315 if (rate != 2 && (ic->ic_flags & IEEE80211_F_SHPREAMBLE)) 1316 desc->plcp_signal |= 0x08; 1317 } 1318 1319 /* RT2x61 supports scatter with up to 5 segments */ 1320 for (i = 0; i < nsegs; i++) { 1321 desc->addr[i] = htole32(segs[i].ds_addr); 1322 desc->len [i] = htole16(segs[i].ds_len); 1323 } 1324 } 1325 1326 static int 1327 rt2661_tx_mgt(struct rt2661_softc *sc, struct mbuf *m0, 1328 struct ieee80211_node *ni) 1329 { 1330 struct ieee80211vap *vap = ni->ni_vap; 1331 struct ieee80211com *ic = ni->ni_ic; 1332 struct rt2661_tx_desc *desc; 1333 struct rt2661_tx_data *data; 1334 struct ieee80211_frame *wh; 1335 struct ieee80211_key *k; 1336 bus_dma_segment_t segs[RT2661_MAX_SCATTER]; 1337 uint16_t dur; 1338 uint32_t flags = 0; /* XXX HWSEQ */ 1339 int nsegs, rate, error; 1340 1341 desc = &sc->mgtq.desc[sc->mgtq.cur]; 1342 data = &sc->mgtq.data[sc->mgtq.cur]; 1343 1344 rate = vap->iv_txparms[ieee80211_chan2mode(ic->ic_curchan)].mgmtrate; 1345 1346 wh = mtod(m0, struct ieee80211_frame *); 1347 1348 if (wh->i_fc[1] & IEEE80211_FC1_PROTECTED) { 1349 k = ieee80211_crypto_encap(ni, m0); 1350 if (k == NULL) { 1351 m_freem(m0); 1352 return ENOBUFS; 1353 } 1354 } 1355 1356 #if defined(__DragonFly__) 1357 error = bus_dmamap_load_mbuf_segment(sc->mgtq.data_dmat, data->map, m0, 1358 segs, 1, &nsegs, BUS_DMA_NOWAIT); 1359 #else 1360 error = bus_dmamap_load_mbuf_sg(sc->mgtq.data_dmat, data->map, m0, 1361 segs, &nsegs, 0); 1362 #endif 1363 if (error != 0) { 1364 device_printf(sc->sc_dev, "could not map mbuf (error %d)\n", 1365 error); 1366 m_freem(m0); 1367 return error; 1368 } 1369 1370 if (ieee80211_radiotap_active_vap(vap)) { 1371 struct rt2661_tx_radiotap_header *tap = &sc->sc_txtap; 1372 1373 tap->wt_flags = 0; 1374 tap->wt_rate = rate; 1375 1376 ieee80211_radiotap_tx(vap, m0); 1377 } 1378 1379 data->m = m0; 1380 data->ni = ni; 1381 /* management frames are not taken into account for amrr */ 1382 data->rix = IEEE80211_FIXED_RATE_NONE; 1383 1384 wh = mtod(m0, struct ieee80211_frame *); 1385 1386 if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) { 1387 flags |= RT2661_TX_NEED_ACK; 1388 1389 dur = ieee80211_ack_duration(ic->ic_rt, 1390 rate, ic->ic_flags & IEEE80211_F_SHPREAMBLE); 1391 *(uint16_t *)wh->i_dur = htole16(dur); 1392 1393 /* tell hardware to add timestamp in probe responses */ 1394 if ((wh->i_fc[0] & 1395 (IEEE80211_FC0_TYPE_MASK | IEEE80211_FC0_SUBTYPE_MASK)) == 1396 (IEEE80211_FC0_TYPE_MGT | IEEE80211_FC0_SUBTYPE_PROBE_RESP)) 1397 flags |= RT2661_TX_TIMESTAMP; 1398 } 1399 1400 rt2661_setup_tx_desc(sc, desc, flags, 0 /* XXX HWSEQ */, 1401 m0->m_pkthdr.len, rate, segs, nsegs, RT2661_QID_MGT); 1402 1403 bus_dmamap_sync(sc->mgtq.data_dmat, data->map, BUS_DMASYNC_PREWRITE); 1404 bus_dmamap_sync(sc->mgtq.desc_dmat, sc->mgtq.desc_map, 1405 BUS_DMASYNC_PREWRITE); 1406 1407 DPRINTFN(sc, 10, "sending mgt frame len=%u idx=%u rate=%u\n", 1408 m0->m_pkthdr.len, sc->mgtq.cur, rate); 1409 1410 /* kick mgt */ 1411 sc->mgtq.queued++; 1412 sc->mgtq.cur = (sc->mgtq.cur + 1) % RT2661_MGT_RING_COUNT; 1413 RAL_WRITE(sc, RT2661_TX_CNTL_CSR, RT2661_KICK_MGT); 1414 1415 return 0; 1416 } 1417 1418 static int 1419 rt2661_sendprot(struct rt2661_softc *sc, int ac, 1420 const struct mbuf *m, struct ieee80211_node *ni, int prot, int rate) 1421 { 1422 struct ieee80211com *ic = ni->ni_ic; 1423 struct rt2661_tx_ring *txq = &sc->txq[ac]; 1424 const struct ieee80211_frame *wh; 1425 struct rt2661_tx_desc *desc; 1426 struct rt2661_tx_data *data; 1427 struct mbuf *mprot; 1428 int protrate, ackrate, pktlen, flags, isshort, error; 1429 uint16_t dur; 1430 bus_dma_segment_t segs[RT2661_MAX_SCATTER]; 1431 int nsegs; 1432 1433 KASSERT(prot == IEEE80211_PROT_RTSCTS || prot == IEEE80211_PROT_CTSONLY, 1434 ("protection %d", prot)); 1435 1436 wh = mtod(m, const struct ieee80211_frame *); 1437 pktlen = m->m_pkthdr.len + IEEE80211_CRC_LEN; 1438 1439 protrate = ieee80211_ctl_rate(ic->ic_rt, rate); 1440 ackrate = ieee80211_ack_rate(ic->ic_rt, rate); 1441 1442 isshort = (ic->ic_flags & IEEE80211_F_SHPREAMBLE) != 0; 1443 dur = ieee80211_compute_duration(ic->ic_rt, pktlen, rate, isshort) 1444 + ieee80211_ack_duration(ic->ic_rt, rate, isshort); 1445 flags = RT2661_TX_MORE_FRAG; 1446 if (prot == IEEE80211_PROT_RTSCTS) { 1447 /* NB: CTS is the same size as an ACK */ 1448 dur += ieee80211_ack_duration(ic->ic_rt, rate, isshort); 1449 flags |= RT2661_TX_NEED_ACK; 1450 mprot = ieee80211_alloc_rts(ic, wh->i_addr1, wh->i_addr2, dur); 1451 } else { 1452 mprot = ieee80211_alloc_cts(ic, ni->ni_vap->iv_myaddr, dur); 1453 } 1454 if (mprot == NULL) { 1455 /* XXX stat + msg */ 1456 return ENOBUFS; 1457 } 1458 1459 data = &txq->data[txq->cur]; 1460 desc = &txq->desc[txq->cur]; 1461 1462 #if defined(__DragonFly__) 1463 error = bus_dmamap_load_mbuf_segment(txq->data_dmat, data->map, mprot, 1464 segs, 1, &nsegs, BUS_DMA_NOWAIT); 1465 #else 1466 error = bus_dmamap_load_mbuf_sg(txq->data_dmat, data->map, mprot, segs, 1467 &nsegs, 0); 1468 #endif 1469 if (error != 0) { 1470 device_printf(sc->sc_dev, 1471 "could not map mbuf (error %d)\n", error); 1472 m_freem(mprot); 1473 return error; 1474 } 1475 1476 data->m = mprot; 1477 data->ni = ieee80211_ref_node(ni); 1478 /* ctl frames are not taken into account for amrr */ 1479 data->rix = IEEE80211_FIXED_RATE_NONE; 1480 1481 rt2661_setup_tx_desc(sc, desc, flags, 0, mprot->m_pkthdr.len, 1482 protrate, segs, 1, ac); 1483 1484 bus_dmamap_sync(txq->data_dmat, data->map, BUS_DMASYNC_PREWRITE); 1485 bus_dmamap_sync(txq->desc_dmat, txq->desc_map, BUS_DMASYNC_PREWRITE); 1486 1487 txq->queued++; 1488 txq->cur = (txq->cur + 1) % RT2661_TX_RING_COUNT; 1489 1490 return 0; 1491 } 1492 1493 static int 1494 rt2661_tx_data(struct rt2661_softc *sc, struct mbuf *m0, 1495 struct ieee80211_node *ni, int ac) 1496 { 1497 struct ieee80211vap *vap = ni->ni_vap; 1498 struct ieee80211com *ic = &sc->sc_ic; 1499 struct rt2661_tx_ring *txq = &sc->txq[ac]; 1500 struct rt2661_tx_desc *desc; 1501 struct rt2661_tx_data *data; 1502 struct ieee80211_frame *wh; 1503 const struct ieee80211_txparam *tp; 1504 struct ieee80211_key *k; 1505 const struct chanAccParams *cap; 1506 struct mbuf *mnew; 1507 bus_dma_segment_t segs[RT2661_MAX_SCATTER]; 1508 uint16_t dur; 1509 uint32_t flags; 1510 int error, nsegs, rate, noack = 0; 1511 1512 wh = mtod(m0, struct ieee80211_frame *); 1513 1514 tp = &vap->iv_txparms[ieee80211_chan2mode(ni->ni_chan)]; 1515 if (IEEE80211_IS_MULTICAST(wh->i_addr1)) { 1516 rate = tp->mcastrate; 1517 } else if (m0->m_flags & M_EAPOL) { 1518 rate = tp->mgmtrate; 1519 } else if (tp->ucastrate != IEEE80211_FIXED_RATE_NONE) { 1520 rate = tp->ucastrate; 1521 } else { 1522 (void) ieee80211_ratectl_rate(ni, NULL, 0); 1523 rate = ni->ni_txrate; 1524 } 1525 rate &= IEEE80211_RATE_VAL; 1526 1527 if (wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_QOS) { 1528 cap = &ic->ic_wme.wme_chanParams; 1529 noack = cap->cap_wmeParams[ac].wmep_noackPolicy; 1530 } 1531 1532 if (wh->i_fc[1] & IEEE80211_FC1_PROTECTED) { 1533 k = ieee80211_crypto_encap(ni, m0); 1534 if (k == NULL) { 1535 m_freem(m0); 1536 return ENOBUFS; 1537 } 1538 1539 /* packet header may have moved, reset our local pointer */ 1540 wh = mtod(m0, struct ieee80211_frame *); 1541 } 1542 1543 flags = 0; 1544 if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) { 1545 int prot = IEEE80211_PROT_NONE; 1546 if (m0->m_pkthdr.len + IEEE80211_CRC_LEN > vap->iv_rtsthreshold) 1547 prot = IEEE80211_PROT_RTSCTS; 1548 else if ((ic->ic_flags & IEEE80211_F_USEPROT) && 1549 ieee80211_rate2phytype(ic->ic_rt, rate) == IEEE80211_T_OFDM) 1550 prot = ic->ic_protmode; 1551 if (prot != IEEE80211_PROT_NONE) { 1552 error = rt2661_sendprot(sc, ac, m0, ni, prot, rate); 1553 if (error) { 1554 m_freem(m0); 1555 return error; 1556 } 1557 flags |= RT2661_TX_LONG_RETRY | RT2661_TX_IFS; 1558 } 1559 } 1560 1561 data = &txq->data[txq->cur]; 1562 desc = &txq->desc[txq->cur]; 1563 1564 #if defined(__DragonFly__) 1565 error = bus_dmamap_load_mbuf_segment(txq->data_dmat, data->map, m0, 1566 segs, 1, &nsegs, BUS_DMA_NOWAIT); 1567 #else 1568 error = bus_dmamap_load_mbuf_sg(txq->data_dmat, data->map, m0, segs, 1569 &nsegs, 0); 1570 #endif 1571 if (error != 0 && error != EFBIG) { 1572 device_printf(sc->sc_dev, "could not map mbuf (error %d)\n", 1573 error); 1574 m_freem(m0); 1575 return error; 1576 } 1577 if (error != 0) { 1578 mnew = m_defrag(m0, M_NOWAIT); 1579 if (mnew == NULL) { 1580 device_printf(sc->sc_dev, 1581 "could not defragment mbuf\n"); 1582 m_freem(m0); 1583 return ENOBUFS; 1584 } 1585 m0 = mnew; 1586 1587 #if defined(__DragonFly__) 1588 error = bus_dmamap_load_mbuf_segment(txq->data_dmat, data->map, 1589 m0, segs, 1, &nsegs, BUS_DMA_NOWAIT); 1590 #else 1591 error = bus_dmamap_load_mbuf_sg(txq->data_dmat, data->map, m0, 1592 segs, &nsegs, 0); 1593 #endif 1594 if (error != 0) { 1595 device_printf(sc->sc_dev, 1596 "could not map mbuf (error %d)\n", error); 1597 m_freem(m0); 1598 return error; 1599 } 1600 1601 /* packet header have moved, reset our local pointer */ 1602 wh = mtod(m0, struct ieee80211_frame *); 1603 } 1604 1605 if (ieee80211_radiotap_active_vap(vap)) { 1606 struct rt2661_tx_radiotap_header *tap = &sc->sc_txtap; 1607 1608 tap->wt_flags = 0; 1609 tap->wt_rate = rate; 1610 1611 ieee80211_radiotap_tx(vap, m0); 1612 } 1613 1614 data->m = m0; 1615 data->ni = ni; 1616 1617 /* remember link conditions for rate adaptation algorithm */ 1618 if (tp->ucastrate == IEEE80211_FIXED_RATE_NONE) { 1619 data->rix = ni->ni_txrate; 1620 /* XXX probably need last rssi value and not avg */ 1621 data->rssi = ic->ic_node_getrssi(ni); 1622 } else 1623 data->rix = IEEE80211_FIXED_RATE_NONE; 1624 1625 if (!noack && !IEEE80211_IS_MULTICAST(wh->i_addr1)) { 1626 flags |= RT2661_TX_NEED_ACK; 1627 1628 dur = ieee80211_ack_duration(ic->ic_rt, 1629 rate, ic->ic_flags & IEEE80211_F_SHPREAMBLE); 1630 *(uint16_t *)wh->i_dur = htole16(dur); 1631 } 1632 1633 rt2661_setup_tx_desc(sc, desc, flags, 0, m0->m_pkthdr.len, rate, segs, 1634 nsegs, ac); 1635 1636 bus_dmamap_sync(txq->data_dmat, data->map, BUS_DMASYNC_PREWRITE); 1637 bus_dmamap_sync(txq->desc_dmat, txq->desc_map, BUS_DMASYNC_PREWRITE); 1638 1639 DPRINTFN(sc, 10, "sending data frame len=%u idx=%u rate=%u\n", 1640 m0->m_pkthdr.len, txq->cur, rate); 1641 1642 /* kick Tx */ 1643 txq->queued++; 1644 txq->cur = (txq->cur + 1) % RT2661_TX_RING_COUNT; 1645 RAL_WRITE(sc, RT2661_TX_CNTL_CSR, 1 << ac); 1646 1647 return 0; 1648 } 1649 1650 static int 1651 rt2661_transmit(struct ieee80211com *ic, struct mbuf *m) 1652 { 1653 struct rt2661_softc *sc = ic->ic_softc; 1654 int error; 1655 1656 RAL_LOCK(sc); 1657 if ((sc->sc_flags & RAL_RUNNING) == 0) { 1658 RAL_UNLOCK(sc); 1659 return (ENXIO); 1660 } 1661 error = mbufq_enqueue(&sc->sc_snd, m); 1662 if (error) { 1663 RAL_UNLOCK(sc); 1664 return (error); 1665 } 1666 rt2661_start(sc); 1667 RAL_UNLOCK(sc); 1668 1669 return (0); 1670 } 1671 1672 static void 1673 rt2661_start(struct rt2661_softc *sc) 1674 { 1675 struct mbuf *m; 1676 struct ieee80211_node *ni; 1677 int ac; 1678 1679 RAL_LOCK_ASSERT(sc); 1680 1681 /* prevent management frames from being sent if we're not ready */ 1682 if (!(sc->sc_flags & RAL_RUNNING) || sc->sc_invalid) 1683 return; 1684 1685 while ((m = mbufq_dequeue(&sc->sc_snd)) != NULL) { 1686 ac = M_WME_GETAC(m); 1687 if (sc->txq[ac].queued >= RT2661_TX_RING_COUNT - 1) { 1688 /* there is no place left in this ring */ 1689 mbufq_prepend(&sc->sc_snd, m); 1690 break; 1691 } 1692 ni = (struct ieee80211_node *) m->m_pkthdr.rcvif; 1693 if (rt2661_tx_data(sc, m, ni, ac) != 0) { 1694 ieee80211_free_node(ni); 1695 if_inc_counter(ni->ni_vap->iv_ifp, 1696 IFCOUNTER_OERRORS, 1); 1697 break; 1698 } 1699 sc->sc_tx_timer = 5; 1700 } 1701 } 1702 1703 static int 1704 rt2661_raw_xmit(struct ieee80211_node *ni, struct mbuf *m, 1705 const struct ieee80211_bpf_params *params) 1706 { 1707 struct ieee80211com *ic = ni->ni_ic; 1708 struct rt2661_softc *sc = ic->ic_softc; 1709 1710 RAL_LOCK(sc); 1711 1712 /* prevent management frames from being sent if we're not ready */ 1713 if (!(sc->sc_flags & RAL_RUNNING)) { 1714 RAL_UNLOCK(sc); 1715 m_freem(m); 1716 return ENETDOWN; 1717 } 1718 if (sc->mgtq.queued >= RT2661_MGT_RING_COUNT) { 1719 RAL_UNLOCK(sc); 1720 m_freem(m); 1721 return ENOBUFS; /* XXX */ 1722 } 1723 1724 /* 1725 * Legacy path; interpret frame contents to decide 1726 * precisely how to send the frame. 1727 * XXX raw path 1728 */ 1729 if (rt2661_tx_mgt(sc, m, ni) != 0) 1730 goto bad; 1731 sc->sc_tx_timer = 5; 1732 1733 RAL_UNLOCK(sc); 1734 1735 return 0; 1736 bad: 1737 RAL_UNLOCK(sc); 1738 return EIO; /* XXX */ 1739 } 1740 1741 static void 1742 rt2661_watchdog(void *arg) 1743 { 1744 struct rt2661_softc *sc = (struct rt2661_softc *)arg; 1745 1746 RAL_LOCK_ASSERT(sc); 1747 1748 KASSERT(sc->sc_flags & RAL_RUNNING, ("not running")); 1749 1750 if (sc->sc_invalid) /* card ejected */ 1751 return; 1752 1753 if (sc->sc_tx_timer > 0 && --sc->sc_tx_timer == 0) { 1754 device_printf(sc->sc_dev, "device timeout\n"); 1755 rt2661_init_locked(sc); 1756 #if defined(__DragonFly__) 1757 /* not implemented */ 1758 #else 1759 counter_u64_add(sc->sc_ic.ic_oerrors, 1); 1760 #endif 1761 /* NB: callout is reset in rt2661_init() */ 1762 return; 1763 } 1764 callout_reset(&sc->watchdog_ch, hz, rt2661_watchdog, sc); 1765 } 1766 1767 static void 1768 rt2661_parent(struct ieee80211com *ic) 1769 { 1770 struct rt2661_softc *sc = ic->ic_softc; 1771 int startall = 0; 1772 1773 RAL_LOCK(sc); 1774 if (ic->ic_nrunning > 0) { 1775 if ((sc->sc_flags & RAL_RUNNING) == 0) { 1776 rt2661_init_locked(sc); 1777 startall = 1; 1778 } else 1779 rt2661_update_promisc(ic); 1780 } else if (sc->sc_flags & RAL_RUNNING) 1781 rt2661_stop_locked(sc); 1782 RAL_UNLOCK(sc); 1783 if (startall) 1784 ieee80211_start_all(ic); 1785 } 1786 1787 static void 1788 rt2661_bbp_write(struct rt2661_softc *sc, uint8_t reg, uint8_t val) 1789 { 1790 uint32_t tmp; 1791 int ntries; 1792 1793 for (ntries = 0; ntries < 100; ntries++) { 1794 if (!(RAL_READ(sc, RT2661_PHY_CSR3) & RT2661_BBP_BUSY)) 1795 break; 1796 DELAY(1); 1797 } 1798 if (ntries == 100) { 1799 device_printf(sc->sc_dev, "could not write to BBP\n"); 1800 return; 1801 } 1802 1803 tmp = RT2661_BBP_BUSY | (reg & 0x7f) << 8 | val; 1804 RAL_WRITE(sc, RT2661_PHY_CSR3, tmp); 1805 1806 DPRINTFN(sc, 15, "BBP R%u <- 0x%02x\n", reg, val); 1807 } 1808 1809 static uint8_t 1810 rt2661_bbp_read(struct rt2661_softc *sc, uint8_t reg) 1811 { 1812 uint32_t val; 1813 int ntries; 1814 1815 for (ntries = 0; ntries < 100; ntries++) { 1816 if (!(RAL_READ(sc, RT2661_PHY_CSR3) & RT2661_BBP_BUSY)) 1817 break; 1818 DELAY(1); 1819 } 1820 if (ntries == 100) { 1821 device_printf(sc->sc_dev, "could not read from BBP\n"); 1822 return 0; 1823 } 1824 1825 val = RT2661_BBP_BUSY | RT2661_BBP_READ | reg << 8; 1826 RAL_WRITE(sc, RT2661_PHY_CSR3, val); 1827 1828 for (ntries = 0; ntries < 100; ntries++) { 1829 val = RAL_READ(sc, RT2661_PHY_CSR3); 1830 if (!(val & RT2661_BBP_BUSY)) 1831 return val & 0xff; 1832 DELAY(1); 1833 } 1834 1835 device_printf(sc->sc_dev, "could not read from BBP\n"); 1836 return 0; 1837 } 1838 1839 static void 1840 rt2661_rf_write(struct rt2661_softc *sc, uint8_t reg, uint32_t val) 1841 { 1842 uint32_t tmp; 1843 int ntries; 1844 1845 for (ntries = 0; ntries < 100; ntries++) { 1846 if (!(RAL_READ(sc, RT2661_PHY_CSR4) & RT2661_RF_BUSY)) 1847 break; 1848 DELAY(1); 1849 } 1850 if (ntries == 100) { 1851 device_printf(sc->sc_dev, "could not write to RF\n"); 1852 return; 1853 } 1854 1855 tmp = RT2661_RF_BUSY | RT2661_RF_21BIT | (val & 0x1fffff) << 2 | 1856 (reg & 3); 1857 RAL_WRITE(sc, RT2661_PHY_CSR4, tmp); 1858 1859 /* remember last written value in sc */ 1860 sc->rf_regs[reg] = val; 1861 1862 DPRINTFN(sc, 15, "RF R[%u] <- 0x%05x\n", reg & 3, val & 0x1fffff); 1863 } 1864 1865 static int 1866 rt2661_tx_cmd(struct rt2661_softc *sc, uint8_t cmd, uint16_t arg) 1867 { 1868 if (RAL_READ(sc, RT2661_H2M_MAILBOX_CSR) & RT2661_H2M_BUSY) 1869 return EIO; /* there is already a command pending */ 1870 1871 RAL_WRITE(sc, RT2661_H2M_MAILBOX_CSR, 1872 RT2661_H2M_BUSY | RT2661_TOKEN_NO_INTR << 16 | arg); 1873 1874 RAL_WRITE(sc, RT2661_HOST_CMD_CSR, RT2661_KICK_CMD | cmd); 1875 1876 return 0; 1877 } 1878 1879 static void 1880 rt2661_select_antenna(struct rt2661_softc *sc) 1881 { 1882 uint8_t bbp4, bbp77; 1883 uint32_t tmp; 1884 1885 bbp4 = rt2661_bbp_read(sc, 4); 1886 bbp77 = rt2661_bbp_read(sc, 77); 1887 1888 /* TBD */ 1889 1890 /* make sure Rx is disabled before switching antenna */ 1891 tmp = RAL_READ(sc, RT2661_TXRX_CSR0); 1892 RAL_WRITE(sc, RT2661_TXRX_CSR0, tmp | RT2661_DISABLE_RX); 1893 1894 rt2661_bbp_write(sc, 4, bbp4); 1895 rt2661_bbp_write(sc, 77, bbp77); 1896 1897 /* restore Rx filter */ 1898 RAL_WRITE(sc, RT2661_TXRX_CSR0, tmp); 1899 } 1900 1901 /* 1902 * Enable multi-rate retries for frames sent at OFDM rates. 1903 * In 802.11b/g mode, allow fallback to CCK rates. 1904 */ 1905 static void 1906 rt2661_enable_mrr(struct rt2661_softc *sc) 1907 { 1908 struct ieee80211com *ic = &sc->sc_ic; 1909 uint32_t tmp; 1910 1911 tmp = RAL_READ(sc, RT2661_TXRX_CSR4); 1912 1913 tmp &= ~RT2661_MRR_CCK_FALLBACK; 1914 if (!IEEE80211_IS_CHAN_5GHZ(ic->ic_bsschan)) 1915 tmp |= RT2661_MRR_CCK_FALLBACK; 1916 tmp |= RT2661_MRR_ENABLED; 1917 1918 RAL_WRITE(sc, RT2661_TXRX_CSR4, tmp); 1919 } 1920 1921 static void 1922 rt2661_set_txpreamble(struct rt2661_softc *sc) 1923 { 1924 struct ieee80211com *ic = &sc->sc_ic; 1925 uint32_t tmp; 1926 1927 tmp = RAL_READ(sc, RT2661_TXRX_CSR4); 1928 1929 tmp &= ~RT2661_SHORT_PREAMBLE; 1930 if (ic->ic_flags & IEEE80211_F_SHPREAMBLE) 1931 tmp |= RT2661_SHORT_PREAMBLE; 1932 1933 RAL_WRITE(sc, RT2661_TXRX_CSR4, tmp); 1934 } 1935 1936 static void 1937 rt2661_set_basicrates(struct rt2661_softc *sc, 1938 const struct ieee80211_rateset *rs) 1939 { 1940 struct ieee80211com *ic = &sc->sc_ic; 1941 uint32_t mask = 0; 1942 uint8_t rate; 1943 int i; 1944 1945 for (i = 0; i < rs->rs_nrates; i++) { 1946 rate = rs->rs_rates[i]; 1947 1948 if (!(rate & IEEE80211_RATE_BASIC)) 1949 continue; 1950 1951 mask |= 1 << ieee80211_legacy_rate_lookup(ic->ic_rt, 1952 IEEE80211_RV(rate)); 1953 } 1954 1955 RAL_WRITE(sc, RT2661_TXRX_CSR5, mask); 1956 1957 DPRINTF(sc, "Setting basic rate mask to 0x%x\n", mask); 1958 } 1959 1960 /* 1961 * Reprogram MAC/BBP to switch to a new band. Values taken from the reference 1962 * driver. 1963 */ 1964 static void 1965 rt2661_select_band(struct rt2661_softc *sc, struct ieee80211_channel *c) 1966 { 1967 uint8_t bbp17, bbp35, bbp96, bbp97, bbp98, bbp104; 1968 uint32_t tmp; 1969 1970 /* update all BBP registers that depend on the band */ 1971 bbp17 = 0x20; bbp96 = 0x48; bbp104 = 0x2c; 1972 bbp35 = 0x50; bbp97 = 0x48; bbp98 = 0x48; 1973 if (IEEE80211_IS_CHAN_5GHZ(c)) { 1974 bbp17 += 0x08; bbp96 += 0x10; bbp104 += 0x0c; 1975 bbp35 += 0x10; bbp97 += 0x10; bbp98 += 0x10; 1976 } 1977 if ((IEEE80211_IS_CHAN_2GHZ(c) && sc->ext_2ghz_lna) || 1978 (IEEE80211_IS_CHAN_5GHZ(c) && sc->ext_5ghz_lna)) { 1979 bbp17 += 0x10; bbp96 += 0x10; bbp104 += 0x10; 1980 } 1981 1982 rt2661_bbp_write(sc, 17, bbp17); 1983 rt2661_bbp_write(sc, 96, bbp96); 1984 rt2661_bbp_write(sc, 104, bbp104); 1985 1986 if ((IEEE80211_IS_CHAN_2GHZ(c) && sc->ext_2ghz_lna) || 1987 (IEEE80211_IS_CHAN_5GHZ(c) && sc->ext_5ghz_lna)) { 1988 rt2661_bbp_write(sc, 75, 0x80); 1989 rt2661_bbp_write(sc, 86, 0x80); 1990 rt2661_bbp_write(sc, 88, 0x80); 1991 } 1992 1993 rt2661_bbp_write(sc, 35, bbp35); 1994 rt2661_bbp_write(sc, 97, bbp97); 1995 rt2661_bbp_write(sc, 98, bbp98); 1996 1997 tmp = RAL_READ(sc, RT2661_PHY_CSR0); 1998 tmp &= ~(RT2661_PA_PE_2GHZ | RT2661_PA_PE_5GHZ); 1999 if (IEEE80211_IS_CHAN_2GHZ(c)) 2000 tmp |= RT2661_PA_PE_2GHZ; 2001 else 2002 tmp |= RT2661_PA_PE_5GHZ; 2003 RAL_WRITE(sc, RT2661_PHY_CSR0, tmp); 2004 } 2005 2006 static void 2007 rt2661_set_chan(struct rt2661_softc *sc, struct ieee80211_channel *c) 2008 { 2009 struct ieee80211com *ic = &sc->sc_ic; 2010 const struct rfprog *rfprog; 2011 uint8_t bbp3, bbp94 = RT2661_BBPR94_DEFAULT; 2012 int8_t power; 2013 u_int i, chan; 2014 2015 chan = ieee80211_chan2ieee(ic, c); 2016 KASSERT(chan != 0 && chan != IEEE80211_CHAN_ANY, ("chan 0x%x", chan)); 2017 2018 /* select the appropriate RF settings based on what EEPROM says */ 2019 rfprog = (sc->rfprog == 0) ? rt2661_rf5225_1 : rt2661_rf5225_2; 2020 2021 /* find the settings for this channel (we know it exists) */ 2022 for (i = 0; rfprog[i].chan != chan; i++); 2023 2024 power = sc->txpow[i]; 2025 if (power < 0) { 2026 bbp94 += power; 2027 power = 0; 2028 } else if (power > 31) { 2029 bbp94 += power - 31; 2030 power = 31; 2031 } 2032 2033 /* 2034 * If we are switching from the 2GHz band to the 5GHz band or 2035 * vice-versa, BBP registers need to be reprogrammed. 2036 */ 2037 if (c->ic_flags != sc->sc_curchan->ic_flags) { 2038 rt2661_select_band(sc, c); 2039 rt2661_select_antenna(sc); 2040 } 2041 sc->sc_curchan = c; 2042 2043 rt2661_rf_write(sc, RAL_RF1, rfprog[i].r1); 2044 rt2661_rf_write(sc, RAL_RF2, rfprog[i].r2); 2045 rt2661_rf_write(sc, RAL_RF3, rfprog[i].r3 | power << 7); 2046 rt2661_rf_write(sc, RAL_RF4, rfprog[i].r4 | sc->rffreq << 10); 2047 2048 DELAY(200); 2049 2050 rt2661_rf_write(sc, RAL_RF1, rfprog[i].r1); 2051 rt2661_rf_write(sc, RAL_RF2, rfprog[i].r2); 2052 rt2661_rf_write(sc, RAL_RF3, rfprog[i].r3 | power << 7 | 1); 2053 rt2661_rf_write(sc, RAL_RF4, rfprog[i].r4 | sc->rffreq << 10); 2054 2055 DELAY(200); 2056 2057 rt2661_rf_write(sc, RAL_RF1, rfprog[i].r1); 2058 rt2661_rf_write(sc, RAL_RF2, rfprog[i].r2); 2059 rt2661_rf_write(sc, RAL_RF3, rfprog[i].r3 | power << 7); 2060 rt2661_rf_write(sc, RAL_RF4, rfprog[i].r4 | sc->rffreq << 10); 2061 2062 /* enable smart mode for MIMO-capable RFs */ 2063 bbp3 = rt2661_bbp_read(sc, 3); 2064 2065 bbp3 &= ~RT2661_SMART_MODE; 2066 if (sc->rf_rev == RT2661_RF_5325 || sc->rf_rev == RT2661_RF_2529) 2067 bbp3 |= RT2661_SMART_MODE; 2068 2069 rt2661_bbp_write(sc, 3, bbp3); 2070 2071 if (bbp94 != RT2661_BBPR94_DEFAULT) 2072 rt2661_bbp_write(sc, 94, bbp94); 2073 2074 /* 5GHz radio needs a 1ms delay here */ 2075 if (IEEE80211_IS_CHAN_5GHZ(c)) 2076 DELAY(1000); 2077 } 2078 2079 static void 2080 rt2661_set_bssid(struct rt2661_softc *sc, const uint8_t *bssid) 2081 { 2082 uint32_t tmp; 2083 2084 tmp = bssid[0] | bssid[1] << 8 | bssid[2] << 16 | bssid[3] << 24; 2085 RAL_WRITE(sc, RT2661_MAC_CSR4, tmp); 2086 2087 tmp = bssid[4] | bssid[5] << 8 | RT2661_ONE_BSSID << 16; 2088 RAL_WRITE(sc, RT2661_MAC_CSR5, tmp); 2089 } 2090 2091 static void 2092 rt2661_set_macaddr(struct rt2661_softc *sc, const uint8_t *addr) 2093 { 2094 uint32_t tmp; 2095 2096 tmp = addr[0] | addr[1] << 8 | addr[2] << 16 | addr[3] << 24; 2097 RAL_WRITE(sc, RT2661_MAC_CSR2, tmp); 2098 2099 tmp = addr[4] | addr[5] << 8; 2100 RAL_WRITE(sc, RT2661_MAC_CSR3, tmp); 2101 } 2102 2103 static void 2104 rt2661_update_promisc(struct ieee80211com *ic) 2105 { 2106 struct rt2661_softc *sc = ic->ic_softc; 2107 uint32_t tmp; 2108 2109 tmp = RAL_READ(sc, RT2661_TXRX_CSR0); 2110 2111 tmp &= ~RT2661_DROP_NOT_TO_ME; 2112 if (ic->ic_promisc == 0) 2113 tmp |= RT2661_DROP_NOT_TO_ME; 2114 2115 RAL_WRITE(sc, RT2661_TXRX_CSR0, tmp); 2116 2117 DPRINTF(sc, "%s promiscuous mode\n", 2118 (ic->ic_promisc > 0) ? "entering" : "leaving"); 2119 } 2120 2121 /* 2122 * Update QoS (802.11e) settings for each h/w Tx ring. 2123 */ 2124 static int 2125 rt2661_wme_update(struct ieee80211com *ic) 2126 { 2127 struct rt2661_softc *sc = ic->ic_softc; 2128 const struct wmeParams *wmep; 2129 2130 wmep = ic->ic_wme.wme_chanParams.cap_wmeParams; 2131 2132 /* XXX: not sure about shifts. */ 2133 /* XXX: the reference driver plays with AC_VI settings too. */ 2134 2135 /* update TxOp */ 2136 RAL_WRITE(sc, RT2661_AC_TXOP_CSR0, 2137 wmep[WME_AC_BE].wmep_txopLimit << 16 | 2138 wmep[WME_AC_BK].wmep_txopLimit); 2139 RAL_WRITE(sc, RT2661_AC_TXOP_CSR1, 2140 wmep[WME_AC_VI].wmep_txopLimit << 16 | 2141 wmep[WME_AC_VO].wmep_txopLimit); 2142 2143 /* update CWmin */ 2144 RAL_WRITE(sc, RT2661_CWMIN_CSR, 2145 wmep[WME_AC_BE].wmep_logcwmin << 12 | 2146 wmep[WME_AC_BK].wmep_logcwmin << 8 | 2147 wmep[WME_AC_VI].wmep_logcwmin << 4 | 2148 wmep[WME_AC_VO].wmep_logcwmin); 2149 2150 /* update CWmax */ 2151 RAL_WRITE(sc, RT2661_CWMAX_CSR, 2152 wmep[WME_AC_BE].wmep_logcwmax << 12 | 2153 wmep[WME_AC_BK].wmep_logcwmax << 8 | 2154 wmep[WME_AC_VI].wmep_logcwmax << 4 | 2155 wmep[WME_AC_VO].wmep_logcwmax); 2156 2157 /* update Aifsn */ 2158 RAL_WRITE(sc, RT2661_AIFSN_CSR, 2159 wmep[WME_AC_BE].wmep_aifsn << 12 | 2160 wmep[WME_AC_BK].wmep_aifsn << 8 | 2161 wmep[WME_AC_VI].wmep_aifsn << 4 | 2162 wmep[WME_AC_VO].wmep_aifsn); 2163 2164 return 0; 2165 } 2166 2167 static void 2168 rt2661_update_slot(struct ieee80211com *ic) 2169 { 2170 struct rt2661_softc *sc = ic->ic_softc; 2171 uint8_t slottime; 2172 uint32_t tmp; 2173 2174 slottime = IEEE80211_GET_SLOTTIME(ic); 2175 2176 tmp = RAL_READ(sc, RT2661_MAC_CSR9); 2177 tmp = (tmp & ~0xff) | slottime; 2178 RAL_WRITE(sc, RT2661_MAC_CSR9, tmp); 2179 } 2180 2181 static const char * 2182 rt2661_get_rf(int rev) 2183 { 2184 switch (rev) { 2185 case RT2661_RF_5225: return "RT5225"; 2186 case RT2661_RF_5325: return "RT5325 (MIMO XR)"; 2187 case RT2661_RF_2527: return "RT2527"; 2188 case RT2661_RF_2529: return "RT2529 (MIMO XR)"; 2189 default: return "unknown"; 2190 } 2191 } 2192 2193 static void 2194 rt2661_read_eeprom(struct rt2661_softc *sc, uint8_t macaddr[IEEE80211_ADDR_LEN]) 2195 { 2196 uint16_t val; 2197 int i; 2198 2199 /* read MAC address */ 2200 val = rt2661_eeprom_read(sc, RT2661_EEPROM_MAC01); 2201 macaddr[0] = val & 0xff; 2202 macaddr[1] = val >> 8; 2203 2204 val = rt2661_eeprom_read(sc, RT2661_EEPROM_MAC23); 2205 macaddr[2] = val & 0xff; 2206 macaddr[3] = val >> 8; 2207 2208 val = rt2661_eeprom_read(sc, RT2661_EEPROM_MAC45); 2209 macaddr[4] = val & 0xff; 2210 macaddr[5] = val >> 8; 2211 2212 val = rt2661_eeprom_read(sc, RT2661_EEPROM_ANTENNA); 2213 /* XXX: test if different from 0xffff? */ 2214 sc->rf_rev = (val >> 11) & 0x1f; 2215 sc->hw_radio = (val >> 10) & 0x1; 2216 sc->rx_ant = (val >> 4) & 0x3; 2217 sc->tx_ant = (val >> 2) & 0x3; 2218 sc->nb_ant = val & 0x3; 2219 2220 DPRINTF(sc, "RF revision=%d\n", sc->rf_rev); 2221 2222 val = rt2661_eeprom_read(sc, RT2661_EEPROM_CONFIG2); 2223 sc->ext_5ghz_lna = (val >> 6) & 0x1; 2224 sc->ext_2ghz_lna = (val >> 4) & 0x1; 2225 2226 DPRINTF(sc, "External 2GHz LNA=%d\nExternal 5GHz LNA=%d\n", 2227 sc->ext_2ghz_lna, sc->ext_5ghz_lna); 2228 2229 val = rt2661_eeprom_read(sc, RT2661_EEPROM_RSSI_2GHZ_OFFSET); 2230 if ((val & 0xff) != 0xff) 2231 sc->rssi_2ghz_corr = (int8_t)(val & 0xff); /* signed */ 2232 2233 /* Only [-10, 10] is valid */ 2234 if (sc->rssi_2ghz_corr < -10 || sc->rssi_2ghz_corr > 10) 2235 sc->rssi_2ghz_corr = 0; 2236 2237 val = rt2661_eeprom_read(sc, RT2661_EEPROM_RSSI_5GHZ_OFFSET); 2238 if ((val & 0xff) != 0xff) 2239 sc->rssi_5ghz_corr = (int8_t)(val & 0xff); /* signed */ 2240 2241 /* Only [-10, 10] is valid */ 2242 if (sc->rssi_5ghz_corr < -10 || sc->rssi_5ghz_corr > 10) 2243 sc->rssi_5ghz_corr = 0; 2244 2245 /* adjust RSSI correction for external low-noise amplifier */ 2246 if (sc->ext_2ghz_lna) 2247 sc->rssi_2ghz_corr -= 14; 2248 if (sc->ext_5ghz_lna) 2249 sc->rssi_5ghz_corr -= 14; 2250 2251 DPRINTF(sc, "RSSI 2GHz corr=%d\nRSSI 5GHz corr=%d\n", 2252 sc->rssi_2ghz_corr, sc->rssi_5ghz_corr); 2253 2254 val = rt2661_eeprom_read(sc, RT2661_EEPROM_FREQ_OFFSET); 2255 if ((val >> 8) != 0xff) 2256 sc->rfprog = (val >> 8) & 0x3; 2257 if ((val & 0xff) != 0xff) 2258 sc->rffreq = val & 0xff; 2259 2260 DPRINTF(sc, "RF prog=%d\nRF freq=%d\n", sc->rfprog, sc->rffreq); 2261 2262 /* read Tx power for all a/b/g channels */ 2263 for (i = 0; i < 19; i++) { 2264 val = rt2661_eeprom_read(sc, RT2661_EEPROM_TXPOWER + i); 2265 sc->txpow[i * 2] = (int8_t)(val >> 8); /* signed */ 2266 DPRINTF(sc, "Channel=%d Tx power=%d\n", 2267 rt2661_rf5225_1[i * 2].chan, sc->txpow[i * 2]); 2268 sc->txpow[i * 2 + 1] = (int8_t)(val & 0xff); /* signed */ 2269 DPRINTF(sc, "Channel=%d Tx power=%d\n", 2270 rt2661_rf5225_1[i * 2 + 1].chan, sc->txpow[i * 2 + 1]); 2271 } 2272 2273 /* read vendor-specific BBP values */ 2274 for (i = 0; i < 16; i++) { 2275 val = rt2661_eeprom_read(sc, RT2661_EEPROM_BBP_BASE + i); 2276 if (val == 0 || val == 0xffff) 2277 continue; /* skip invalid entries */ 2278 sc->bbp_prom[i].reg = val >> 8; 2279 sc->bbp_prom[i].val = val & 0xff; 2280 DPRINTF(sc, "BBP R%d=%02x\n", sc->bbp_prom[i].reg, 2281 sc->bbp_prom[i].val); 2282 } 2283 } 2284 2285 static int 2286 rt2661_bbp_init(struct rt2661_softc *sc) 2287 { 2288 int i, ntries; 2289 uint8_t val; 2290 2291 /* wait for BBP to be ready */ 2292 for (ntries = 0; ntries < 100; ntries++) { 2293 val = rt2661_bbp_read(sc, 0); 2294 if (val != 0 && val != 0xff) 2295 break; 2296 DELAY(100); 2297 } 2298 if (ntries == 100) { 2299 device_printf(sc->sc_dev, "timeout waiting for BBP\n"); 2300 return EIO; 2301 } 2302 2303 /* initialize BBP registers to default values */ 2304 for (i = 0; i < nitems(rt2661_def_bbp); i++) { 2305 rt2661_bbp_write(sc, rt2661_def_bbp[i].reg, 2306 rt2661_def_bbp[i].val); 2307 } 2308 2309 /* write vendor-specific BBP values (from EEPROM) */ 2310 for (i = 0; i < 16; i++) { 2311 if (sc->bbp_prom[i].reg == 0) 2312 continue; 2313 rt2661_bbp_write(sc, sc->bbp_prom[i].reg, sc->bbp_prom[i].val); 2314 } 2315 2316 return 0; 2317 } 2318 2319 static void 2320 rt2661_init_locked(struct rt2661_softc *sc) 2321 { 2322 struct ieee80211com *ic = &sc->sc_ic; 2323 struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps); 2324 uint32_t tmp, sta[3]; 2325 int i, error, ntries; 2326 2327 RAL_LOCK_ASSERT(sc); 2328 2329 if ((sc->sc_flags & RAL_FW_LOADED) == 0) { 2330 error = rt2661_load_microcode(sc); 2331 if (error != 0) { 2332 device_printf(sc->sc_dev, 2333 "%s: could not load 8051 microcode, error %d\n", 2334 __func__, error); 2335 return; 2336 } 2337 sc->sc_flags |= RAL_FW_LOADED; 2338 } 2339 2340 rt2661_stop_locked(sc); 2341 2342 /* initialize Tx rings */ 2343 RAL_WRITE(sc, RT2661_AC1_BASE_CSR, sc->txq[1].physaddr); 2344 RAL_WRITE(sc, RT2661_AC0_BASE_CSR, sc->txq[0].physaddr); 2345 RAL_WRITE(sc, RT2661_AC2_BASE_CSR, sc->txq[2].physaddr); 2346 RAL_WRITE(sc, RT2661_AC3_BASE_CSR, sc->txq[3].physaddr); 2347 2348 /* initialize Mgt ring */ 2349 RAL_WRITE(sc, RT2661_MGT_BASE_CSR, sc->mgtq.physaddr); 2350 2351 /* initialize Rx ring */ 2352 RAL_WRITE(sc, RT2661_RX_BASE_CSR, sc->rxq.physaddr); 2353 2354 /* initialize Tx rings sizes */ 2355 RAL_WRITE(sc, RT2661_TX_RING_CSR0, 2356 RT2661_TX_RING_COUNT << 24 | 2357 RT2661_TX_RING_COUNT << 16 | 2358 RT2661_TX_RING_COUNT << 8 | 2359 RT2661_TX_RING_COUNT); 2360 2361 RAL_WRITE(sc, RT2661_TX_RING_CSR1, 2362 RT2661_TX_DESC_WSIZE << 16 | 2363 RT2661_TX_RING_COUNT << 8 | /* XXX: HCCA ring unused */ 2364 RT2661_MGT_RING_COUNT); 2365 2366 /* initialize Rx rings */ 2367 RAL_WRITE(sc, RT2661_RX_RING_CSR, 2368 RT2661_RX_DESC_BACK << 16 | 2369 RT2661_RX_DESC_WSIZE << 8 | 2370 RT2661_RX_RING_COUNT); 2371 2372 /* XXX: some magic here */ 2373 RAL_WRITE(sc, RT2661_TX_DMA_DST_CSR, 0xaa); 2374 2375 /* load base addresses of all 5 Tx rings (4 data + 1 mgt) */ 2376 RAL_WRITE(sc, RT2661_LOAD_TX_RING_CSR, 0x1f); 2377 2378 /* load base address of Rx ring */ 2379 RAL_WRITE(sc, RT2661_RX_CNTL_CSR, 2); 2380 2381 /* initialize MAC registers to default values */ 2382 for (i = 0; i < nitems(rt2661_def_mac); i++) 2383 RAL_WRITE(sc, rt2661_def_mac[i].reg, rt2661_def_mac[i].val); 2384 2385 rt2661_set_macaddr(sc, vap ? vap->iv_myaddr : ic->ic_macaddr); 2386 2387 /* set host ready */ 2388 RAL_WRITE(sc, RT2661_MAC_CSR1, 3); 2389 RAL_WRITE(sc, RT2661_MAC_CSR1, 0); 2390 2391 /* wait for BBP/RF to wakeup */ 2392 for (ntries = 0; ntries < 1000; ntries++) { 2393 if (RAL_READ(sc, RT2661_MAC_CSR12) & 8) 2394 break; 2395 DELAY(1000); 2396 } 2397 if (ntries == 1000) { 2398 kprintf("timeout waiting for BBP/RF to wakeup\n"); 2399 rt2661_stop_locked(sc); 2400 return; 2401 } 2402 2403 if (rt2661_bbp_init(sc) != 0) { 2404 rt2661_stop_locked(sc); 2405 return; 2406 } 2407 2408 /* select default channel */ 2409 sc->sc_curchan = ic->ic_curchan; 2410 rt2661_select_band(sc, sc->sc_curchan); 2411 rt2661_select_antenna(sc); 2412 rt2661_set_chan(sc, sc->sc_curchan); 2413 2414 /* update Rx filter */ 2415 tmp = RAL_READ(sc, RT2661_TXRX_CSR0) & 0xffff; 2416 2417 tmp |= RT2661_DROP_PHY_ERROR | RT2661_DROP_CRC_ERROR; 2418 if (ic->ic_opmode != IEEE80211_M_MONITOR) { 2419 tmp |= RT2661_DROP_CTL | RT2661_DROP_VER_ERROR | 2420 RT2661_DROP_ACKCTS; 2421 if (ic->ic_opmode != IEEE80211_M_HOSTAP && 2422 ic->ic_opmode != IEEE80211_M_MBSS) 2423 tmp |= RT2661_DROP_TODS; 2424 if (ic->ic_promisc == 0) 2425 tmp |= RT2661_DROP_NOT_TO_ME; 2426 } 2427 2428 RAL_WRITE(sc, RT2661_TXRX_CSR0, tmp); 2429 2430 /* clear STA registers */ 2431 RAL_READ_REGION_4(sc, RT2661_STA_CSR0, sta, nitems(sta)); 2432 2433 /* initialize ASIC */ 2434 RAL_WRITE(sc, RT2661_MAC_CSR1, 4); 2435 2436 /* clear any pending interrupt */ 2437 RAL_WRITE(sc, RT2661_INT_SOURCE_CSR, 0xffffffff); 2438 2439 /* enable interrupts */ 2440 RAL_WRITE(sc, RT2661_INT_MASK_CSR, 0x0000ff10); 2441 RAL_WRITE(sc, RT2661_MCU_INT_MASK_CSR, 0); 2442 2443 /* kick Rx */ 2444 RAL_WRITE(sc, RT2661_RX_CNTL_CSR, 1); 2445 2446 sc->sc_flags |= RAL_RUNNING; 2447 2448 callout_reset(&sc->watchdog_ch, hz, rt2661_watchdog, sc); 2449 } 2450 2451 static void 2452 rt2661_init(void *priv) 2453 { 2454 struct rt2661_softc *sc = priv; 2455 struct ieee80211com *ic = &sc->sc_ic; 2456 2457 RAL_LOCK(sc); 2458 rt2661_init_locked(sc); 2459 RAL_UNLOCK(sc); 2460 2461 if (sc->sc_flags & RAL_RUNNING) 2462 ieee80211_start_all(ic); /* start all vap's */ 2463 } 2464 2465 static void 2466 rt2661_stop_locked(struct rt2661_softc *sc) 2467 { 2468 volatile int *flags = &sc->sc_flags; 2469 uint32_t tmp; 2470 2471 #if defined(__DragonFly__) 2472 while (*flags & RAL_INPUT_RUNNING) 2473 lksleep(sc, &sc->sc_mtx, 0, "ralrunning", hz/10); 2474 #else 2475 while (*flags & RAL_INPUT_RUNNING) 2476 msleep(sc, &sc->sc_mtx, 0, "ralrunning", hz/10); 2477 #endif 2478 2479 callout_stop(&sc->watchdog_ch); 2480 sc->sc_tx_timer = 0; 2481 2482 if (sc->sc_flags & RAL_RUNNING) { 2483 sc->sc_flags &= ~RAL_RUNNING; 2484 2485 /* abort Tx (for all 5 Tx rings) */ 2486 RAL_WRITE(sc, RT2661_TX_CNTL_CSR, 0x1f << 16); 2487 2488 /* disable Rx (value remains after reset!) */ 2489 tmp = RAL_READ(sc, RT2661_TXRX_CSR0); 2490 RAL_WRITE(sc, RT2661_TXRX_CSR0, tmp | RT2661_DISABLE_RX); 2491 2492 /* reset ASIC */ 2493 RAL_WRITE(sc, RT2661_MAC_CSR1, 3); 2494 RAL_WRITE(sc, RT2661_MAC_CSR1, 0); 2495 2496 /* disable interrupts */ 2497 RAL_WRITE(sc, RT2661_INT_MASK_CSR, 0xffffffff); 2498 RAL_WRITE(sc, RT2661_MCU_INT_MASK_CSR, 0xffffffff); 2499 2500 /* clear any pending interrupt */ 2501 RAL_WRITE(sc, RT2661_INT_SOURCE_CSR, 0xffffffff); 2502 RAL_WRITE(sc, RT2661_MCU_INT_SOURCE_CSR, 0xffffffff); 2503 2504 /* reset Tx and Rx rings */ 2505 rt2661_reset_tx_ring(sc, &sc->txq[0]); 2506 rt2661_reset_tx_ring(sc, &sc->txq[1]); 2507 rt2661_reset_tx_ring(sc, &sc->txq[2]); 2508 rt2661_reset_tx_ring(sc, &sc->txq[3]); 2509 rt2661_reset_tx_ring(sc, &sc->mgtq); 2510 rt2661_reset_rx_ring(sc, &sc->rxq); 2511 } 2512 } 2513 2514 static void 2515 rt2661_stop(void *priv) 2516 { 2517 struct rt2661_softc *sc = priv; 2518 2519 RAL_LOCK(sc); 2520 rt2661_stop_locked(sc); 2521 RAL_UNLOCK(sc); 2522 } 2523 2524 static int 2525 rt2661_load_microcode(struct rt2661_softc *sc) 2526 { 2527 const struct firmware *fp; 2528 const char *imagename; 2529 int ntries, error; 2530 2531 RAL_LOCK_ASSERT(sc); 2532 2533 switch (sc->sc_id) { 2534 case 0x0301: imagename = "rt2561sfw"; break; 2535 case 0x0302: imagename = "rt2561fw"; break; 2536 case 0x0401: imagename = "rt2661fw"; break; 2537 default: 2538 device_printf(sc->sc_dev, "%s: unexpected pci device id 0x%x, " 2539 "don't know how to retrieve firmware\n", 2540 __func__, sc->sc_id); 2541 return EINVAL; 2542 } 2543 RAL_UNLOCK(sc); 2544 fp = firmware_get(imagename); 2545 RAL_LOCK(sc); 2546 if (fp == NULL) { 2547 device_printf(sc->sc_dev, 2548 "%s: unable to retrieve firmware image %s\n", 2549 __func__, imagename); 2550 return EINVAL; 2551 } 2552 2553 /* 2554 * Load 8051 microcode into NIC. 2555 */ 2556 /* reset 8051 */ 2557 RAL_WRITE(sc, RT2661_MCU_CNTL_CSR, RT2661_MCU_RESET); 2558 2559 /* cancel any pending Host to MCU command */ 2560 RAL_WRITE(sc, RT2661_H2M_MAILBOX_CSR, 0); 2561 RAL_WRITE(sc, RT2661_M2H_CMD_DONE_CSR, 0xffffffff); 2562 RAL_WRITE(sc, RT2661_HOST_CMD_CSR, 0); 2563 2564 /* write 8051's microcode */ 2565 RAL_WRITE(sc, RT2661_MCU_CNTL_CSR, RT2661_MCU_RESET | RT2661_MCU_SEL); 2566 RAL_WRITE_REGION_1(sc, RT2661_MCU_CODE_BASE, fp->data, fp->datasize); 2567 RAL_WRITE(sc, RT2661_MCU_CNTL_CSR, RT2661_MCU_RESET); 2568 2569 /* kick 8051's ass */ 2570 RAL_WRITE(sc, RT2661_MCU_CNTL_CSR, 0); 2571 2572 /* wait for 8051 to initialize */ 2573 for (ntries = 0; ntries < 500; ntries++) { 2574 if (RAL_READ(sc, RT2661_MCU_CNTL_CSR) & RT2661_MCU_READY) 2575 break; 2576 DELAY(100); 2577 } 2578 if (ntries == 500) { 2579 device_printf(sc->sc_dev, 2580 "%s: timeout waiting for MCU to initialize\n", __func__); 2581 error = EIO; 2582 } else 2583 error = 0; 2584 2585 firmware_put(fp, FIRMWARE_UNLOAD); 2586 return error; 2587 } 2588 2589 #ifdef notyet 2590 /* 2591 * Dynamically tune Rx sensitivity (BBP register 17) based on average RSSI and 2592 * false CCA count. This function is called periodically (every seconds) when 2593 * in the RUN state. Values taken from the reference driver. 2594 */ 2595 static void 2596 rt2661_rx_tune(struct rt2661_softc *sc) 2597 { 2598 uint8_t bbp17; 2599 uint16_t cca; 2600 int lo, hi, dbm; 2601 2602 /* 2603 * Tuning range depends on operating band and on the presence of an 2604 * external low-noise amplifier. 2605 */ 2606 lo = 0x20; 2607 if (IEEE80211_IS_CHAN_5GHZ(sc->sc_curchan)) 2608 lo += 0x08; 2609 if ((IEEE80211_IS_CHAN_2GHZ(sc->sc_curchan) && sc->ext_2ghz_lna) || 2610 (IEEE80211_IS_CHAN_5GHZ(sc->sc_curchan) && sc->ext_5ghz_lna)) 2611 lo += 0x10; 2612 hi = lo + 0x20; 2613 2614 /* retrieve false CCA count since last call (clear on read) */ 2615 cca = RAL_READ(sc, RT2661_STA_CSR1) & 0xffff; 2616 2617 if (dbm >= -35) { 2618 bbp17 = 0x60; 2619 } else if (dbm >= -58) { 2620 bbp17 = hi; 2621 } else if (dbm >= -66) { 2622 bbp17 = lo + 0x10; 2623 } else if (dbm >= -74) { 2624 bbp17 = lo + 0x08; 2625 } else { 2626 /* RSSI < -74dBm, tune using false CCA count */ 2627 2628 bbp17 = sc->bbp17; /* current value */ 2629 2630 hi -= 2 * (-74 - dbm); 2631 if (hi < lo) 2632 hi = lo; 2633 2634 if (bbp17 > hi) { 2635 bbp17 = hi; 2636 2637 } else if (cca > 512) { 2638 if (++bbp17 > hi) 2639 bbp17 = hi; 2640 } else if (cca < 100) { 2641 if (--bbp17 < lo) 2642 bbp17 = lo; 2643 } 2644 } 2645 2646 if (bbp17 != sc->bbp17) { 2647 rt2661_bbp_write(sc, 17, bbp17); 2648 sc->bbp17 = bbp17; 2649 } 2650 } 2651 2652 /* 2653 * Enter/Leave radar detection mode. 2654 * This is for 802.11h additional regulatory domains. 2655 */ 2656 static void 2657 rt2661_radar_start(struct rt2661_softc *sc) 2658 { 2659 uint32_t tmp; 2660 2661 /* disable Rx */ 2662 tmp = RAL_READ(sc, RT2661_TXRX_CSR0); 2663 RAL_WRITE(sc, RT2661_TXRX_CSR0, tmp | RT2661_DISABLE_RX); 2664 2665 rt2661_bbp_write(sc, 82, 0x20); 2666 rt2661_bbp_write(sc, 83, 0x00); 2667 rt2661_bbp_write(sc, 84, 0x40); 2668 2669 /* save current BBP registers values */ 2670 sc->bbp18 = rt2661_bbp_read(sc, 18); 2671 sc->bbp21 = rt2661_bbp_read(sc, 21); 2672 sc->bbp22 = rt2661_bbp_read(sc, 22); 2673 sc->bbp16 = rt2661_bbp_read(sc, 16); 2674 sc->bbp17 = rt2661_bbp_read(sc, 17); 2675 sc->bbp64 = rt2661_bbp_read(sc, 64); 2676 2677 rt2661_bbp_write(sc, 18, 0xff); 2678 rt2661_bbp_write(sc, 21, 0x3f); 2679 rt2661_bbp_write(sc, 22, 0x3f); 2680 rt2661_bbp_write(sc, 16, 0xbd); 2681 rt2661_bbp_write(sc, 17, sc->ext_5ghz_lna ? 0x44 : 0x34); 2682 rt2661_bbp_write(sc, 64, 0x21); 2683 2684 /* restore Rx filter */ 2685 RAL_WRITE(sc, RT2661_TXRX_CSR0, tmp); 2686 } 2687 2688 static int 2689 rt2661_radar_stop(struct rt2661_softc *sc) 2690 { 2691 uint8_t bbp66; 2692 2693 /* read radar detection result */ 2694 bbp66 = rt2661_bbp_read(sc, 66); 2695 2696 /* restore BBP registers values */ 2697 rt2661_bbp_write(sc, 16, sc->bbp16); 2698 rt2661_bbp_write(sc, 17, sc->bbp17); 2699 rt2661_bbp_write(sc, 18, sc->bbp18); 2700 rt2661_bbp_write(sc, 21, sc->bbp21); 2701 rt2661_bbp_write(sc, 22, sc->bbp22); 2702 rt2661_bbp_write(sc, 64, sc->bbp64); 2703 2704 return bbp66 == 1; 2705 } 2706 #endif 2707 2708 static int 2709 rt2661_prepare_beacon(struct rt2661_softc *sc, struct ieee80211vap *vap) 2710 { 2711 struct ieee80211com *ic = vap->iv_ic; 2712 struct rt2661_tx_desc desc; 2713 struct mbuf *m0; 2714 int rate; 2715 2716 if ((m0 = ieee80211_beacon_alloc(vap->iv_bss))== NULL) { 2717 device_printf(sc->sc_dev, "could not allocate beacon frame\n"); 2718 return ENOBUFS; 2719 } 2720 2721 /* send beacons at the lowest available rate */ 2722 rate = IEEE80211_IS_CHAN_5GHZ(ic->ic_bsschan) ? 12 : 2; 2723 2724 rt2661_setup_tx_desc(sc, &desc, RT2661_TX_TIMESTAMP, RT2661_TX_HWSEQ, 2725 m0->m_pkthdr.len, rate, NULL, 0, RT2661_QID_MGT); 2726 2727 /* copy the first 24 bytes of Tx descriptor into NIC memory */ 2728 RAL_WRITE_REGION_1(sc, RT2661_HW_BEACON_BASE0, (uint8_t *)&desc, 24); 2729 2730 /* copy beacon header and payload into NIC memory */ 2731 RAL_WRITE_REGION_1(sc, RT2661_HW_BEACON_BASE0 + 24, 2732 mtod(m0, uint8_t *), m0->m_pkthdr.len); 2733 2734 m_freem(m0); 2735 2736 return 0; 2737 } 2738 2739 /* 2740 * Enable TSF synchronization and tell h/w to start sending beacons for IBSS 2741 * and HostAP operating modes. 2742 */ 2743 static void 2744 rt2661_enable_tsf_sync(struct rt2661_softc *sc) 2745 { 2746 struct ieee80211com *ic = &sc->sc_ic; 2747 struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps); 2748 uint32_t tmp; 2749 2750 if (vap->iv_opmode != IEEE80211_M_STA) { 2751 /* 2752 * Change default 16ms TBTT adjustment to 8ms. 2753 * Must be done before enabling beacon generation. 2754 */ 2755 RAL_WRITE(sc, RT2661_TXRX_CSR10, 1 << 12 | 8); 2756 } 2757 2758 tmp = RAL_READ(sc, RT2661_TXRX_CSR9) & 0xff000000; 2759 2760 /* set beacon interval (in 1/16ms unit) */ 2761 tmp |= vap->iv_bss->ni_intval * 16; 2762 2763 tmp |= RT2661_TSF_TICKING | RT2661_ENABLE_TBTT; 2764 if (vap->iv_opmode == IEEE80211_M_STA) 2765 tmp |= RT2661_TSF_MODE(1); 2766 else 2767 tmp |= RT2661_TSF_MODE(2) | RT2661_GENERATE_BEACON; 2768 2769 RAL_WRITE(sc, RT2661_TXRX_CSR9, tmp); 2770 } 2771 2772 static void 2773 rt2661_enable_tsf(struct rt2661_softc *sc) 2774 { 2775 RAL_WRITE(sc, RT2661_TXRX_CSR9, 2776 (RAL_READ(sc, RT2661_TXRX_CSR9) & 0xff000000) 2777 | RT2661_TSF_TICKING | RT2661_TSF_MODE(2)); 2778 } 2779 2780 /* 2781 * Retrieve the "Received Signal Strength Indicator" from the raw values 2782 * contained in Rx descriptors. The computation depends on which band the 2783 * frame was received. Correction values taken from the reference driver. 2784 */ 2785 static int 2786 rt2661_get_rssi(struct rt2661_softc *sc, uint8_t raw) 2787 { 2788 int lna, agc, rssi; 2789 2790 lna = (raw >> 5) & 0x3; 2791 agc = raw & 0x1f; 2792 2793 if (lna == 0) { 2794 /* 2795 * No mapping available. 2796 * 2797 * NB: Since RSSI is relative to noise floor, -1 is 2798 * adequate for caller to know error happened. 2799 */ 2800 return -1; 2801 } 2802 2803 rssi = (2 * agc) - RT2661_NOISE_FLOOR; 2804 2805 if (IEEE80211_IS_CHAN_2GHZ(sc->sc_curchan)) { 2806 rssi += sc->rssi_2ghz_corr; 2807 2808 if (lna == 1) 2809 rssi -= 64; 2810 else if (lna == 2) 2811 rssi -= 74; 2812 else if (lna == 3) 2813 rssi -= 90; 2814 } else { 2815 rssi += sc->rssi_5ghz_corr; 2816 2817 if (lna == 1) 2818 rssi -= 64; 2819 else if (lna == 2) 2820 rssi -= 86; 2821 else if (lna == 3) 2822 rssi -= 100; 2823 } 2824 return rssi; 2825 } 2826 2827 static void 2828 rt2661_scan_start(struct ieee80211com *ic) 2829 { 2830 struct rt2661_softc *sc = ic->ic_softc; 2831 uint32_t tmp; 2832 2833 /* abort TSF synchronization */ 2834 tmp = RAL_READ(sc, RT2661_TXRX_CSR9); 2835 RAL_WRITE(sc, RT2661_TXRX_CSR9, tmp & ~0xffffff); 2836 rt2661_set_bssid(sc, ieee80211broadcastaddr); 2837 } 2838 2839 static void 2840 rt2661_scan_end(struct ieee80211com *ic) 2841 { 2842 struct rt2661_softc *sc = ic->ic_softc; 2843 struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps); 2844 2845 rt2661_enable_tsf_sync(sc); 2846 /* XXX keep local copy */ 2847 rt2661_set_bssid(sc, vap->iv_bss->ni_bssid); 2848 } 2849 2850 static void 2851 rt2661_set_channel(struct ieee80211com *ic) 2852 { 2853 struct rt2661_softc *sc = ic->ic_softc; 2854 2855 RAL_LOCK(sc); 2856 rt2661_set_chan(sc, ic->ic_curchan); 2857 RAL_UNLOCK(sc); 2858 2859 } 2860