xref: /dragonfly/sys/dev/netif/re/if_rereg.h (revision c3762235)
1 /*
2  * Copyright (c) 2004
3  *	Joerg Sonnenberger <joerg@bec.de>.  All rights reserved.
4  *
5  * Copyright (c) 1997, 1998-2003
6  *	Bill Paul <wpaul@ctr.columbia.edu>.  All rights reserved.
7  *
8  * Redistribution and use in source and binary forms, with or without
9  * modification, are permitted provided that the following conditions
10  * are met:
11  * 1. Redistributions of source code must retain the above copyright
12  *    notice, this list of conditions and the following disclaimer.
13  * 2. Redistributions in binary form must reproduce the above copyright
14  *    notice, this list of conditions and the following disclaimer in the
15  *    documentation and/or other materials provided with the distribution.
16  * 3. All advertising materials mentioning features or use of this software
17  *    must display the following acknowledgement:
18  *	This product includes software developed by Bill Paul.
19  * 4. Neither the name of the author nor the names of any co-contributors
20  *    may be used to endorse or promote products derived from this software
21  *    without specific prior written permission.
22  *
23  * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
24  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
25  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
26  * ARE DISCLAIMED.  IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
27  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
28  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
29  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
30  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
31  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
32  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
33  * THE POSSIBILITY OF SUCH DAMAGE.
34  *
35  * $FreeBSD: src/sys/pci/if_rlreg.h,v 1.42 2004/05/24 19:39:23 jhb Exp $
36  */
37 
38 /*
39  * RealTek 8129/8139 register offsets
40  */
41 #define	RE_IDR0		0x0000		/* ID register 0 (station addr) */
42 #define	RE_IDR1		0x0001		/* Must use 32-bit accesses (?) */
43 #define	RE_IDR2		0x0002
44 #define	RE_IDR3		0x0003
45 #define	RE_IDR4		0x0004
46 #define	RE_IDR5		0x0005
47 					/* 0006-0007 reserved */
48 #define	RE_MAR0		0x0008		/* Multicast hash table */
49 #define	RE_MAR1		0x0009
50 #define	RE_MAR2		0x000A
51 #define	RE_MAR3		0x000B
52 #define	RE_MAR4		0x000C
53 #define	RE_MAR5		0x000D
54 #define	RE_MAR6		0x000E
55 #define	RE_MAR7		0x000F
56 
57 #define RE_RXADDR		0x0030	/* RX ring start address */
58 #define RE_RX_EARLY_BYTES	0x0034	/* RX early byte count */
59 #define RE_RX_EARLY_STAT	0x0036	/* RX early status */
60 #define RE_COMMAND	0x0037		/* command register */
61 #define RE_CURRXADDR	0x0038		/* current address of packet read */
62 #define RE_CURRXBUF	0x003A		/* current RX buffer address */
63 #define RE_IMR		0x003C		/* interrupt mask register */
64 #define RE_ISR		0x003E		/* interrupt status register */
65 #define RE_TXCFG	0x0040		/* transmit config */
66 #define RE_RXCFG	0x0044		/* receive config */
67 #define RE_TIMERCNT	0x0048		/* timer count register */
68 #define RE_MISSEDPKT	0x004C		/* missed packet counter */
69 #define RE_EECMD	0x0050		/* EEPROM command register */
70 #define RE_CFG0		0x0051		/* config register #0 */
71 #define RE_CFG1		0x0052		/* config register #1 */
72 #define RE_CFG2		0x0053		/* config register #2 */
73                                         /* 0054-0057 reserved */
74 #define RE_MEDIASTAT	0x0058		/* media status register (8139) */
75 					/* 0059-005A reserved */
76 #define RE_MII		0x005A		/* 8129 chip only */
77 #define RE_HALTCLK	0x005B
78 #define RE_MULTIINTR	0x005C		/* multiple interrupt */
79 #define RE_PCIREV	0x005E		/* PCI revision value */
80 					/* 005F reserved */
81 #define RE_TXSTAT_ALL	0x0060		/* TX status of all descriptors */
82 
83 /* Direct PHY access registers only available on 8139 */
84 #define RE_BMCR		0x0062		/* PHY basic mode control */
85 #define RE_BMSR		0x0064		/* PHY basic mode status */
86 #define RE_ANAR		0x0066		/* PHY autoneg advert */
87 #define RE_LPAR		0x0068		/* PHY link partner ability */
88 #define RE_ANER		0x006A		/* PHY autoneg expansion */
89 
90 #define RE_DISCCNT	0x006C		/* disconnect counter */
91 #define RE_FALSECAR	0x006E		/* false carrier counter */
92 #define RE_NWAYTST	0x0070		/* NWAY test register */
93 #define RE_RX_ER	0x0072		/* RX_ER counter */
94 #define RE_CSCFG	0x0074		/* CS configuration register */
95 
96 /*
97  * When operating in special C+ mode, some of the registers in an
98  * 8139C+ chip have different definitions. These are also used for
99  * the 8169 gigE chip.
100  */
101 #define RE_DUMPSTATS_LO		0x0010	/* counter dump command register */
102 #define RE_DUMPSTATS_HI		0x0014	/* counter dump command register */
103 #define RE_TXLIST_ADDR_LO	0x0020	/* 64 bits, 256 byte alignment */
104 #define RE_TXLIST_ADDR_HI	0x0024	/* 64 bits, 256 byte alignment */
105 #define RE_TXLIST_ADDR_HPRIO_LO	0x0028	/* 64 bits, 256 byte alignment */
106 #define RE_TXLIST_ADDR_HPRIO_HI	0x002C	/* 64 bits, 256 byte alignment */
107 #define RE_CFG2			0x0053
108 #define RE_TIMERINT		0x0054	/* interrupt on timer expire */
109 #define RE_TXSTART		0x00D9	/* 8 bits */
110 #define RE_CPLUS_CMD		0x00E0	/* 16 bits */
111 #define RE_IM			0x00E2	/* 16 bits */
112 #define RE_RXLIST_ADDR_LO	0x00E4	/* 64 bits, 256 byte alignment */
113 #define RE_RXLIST_ADDR_HI	0x00E8	/* 64 bits, 256 byte alignment */
114 #define RE_EARLY_TX_THRESH	0x00EC	/* 8 bits */
115 
116 /*
117  * Registers specific to the 8169 gigE chip
118  */
119 #define RE_TIMERINT_8169	0x0058	/* different offset than 8139 */
120 #define RE_PHYAR		0x0060
121 #define RE_TBICSR		0x0064
122 #define RE_TBI_ANAR		0x0068
123 #define RE_TBI_LPAR		0x006A
124 #define RE_GMEDIASTAT		0x006C	/* 8 bits */
125 #define RE_MAXRXPKTLEN		0x00DA	/* 16 bits, chip multiplies by 8 */
126 #define RE_GTXSTART		0x0038	/* 16 bits */
127 
128 /*
129  * TX config register bits
130  */
131 #define RE_TXCFG_CLRABRT	0x00000001	/* retransmit aborted pkt */
132 #define RE_TXCFG_MAXDMA		0x00000700	/* max DMA burst size */
133 #define RE_TXCFG_CRCAPPEND	0x00010000	/* CRC append (0 = yes) */
134 #define RE_TXCFG_LOOPBKTST	0x00060000	/* loopback test */
135 #define RE_TXCFG_IFG2		0x00080000	/* 8169 only */
136 #define RE_TXCFG_IFG		0x03000000	/* interframe gap */
137 #define RE_TXCFG_HWREV		0x7C800000
138 #define RE_TXCFG_MACMODE	0x00700000
139 
140 /*
141  * Config 2 register bits
142  */
143 #define RE_CFG2_PCICLK_MASK	0x07
144 #define RE_CFG2_PCICLK_33MHZ	0x00
145 #define RE_CFG2_PCICLK_66MHZ	0x01
146 #define RE_CFG2_PCI64		0x08
147 
148 #define RE_LOOPTEST_OFF		0x00000000
149 #define RE_LOOPTEST_ON		0x00020000
150 #define RE_LOOPTEST_ON_CPLUS	0x00060000
151 
152 #define RE_HWREV_8169		0x00000000
153 #define RE_HWREV_8110S		0x00800000
154 #define RE_HWREV_8169S		0x04000000
155 #define RE_HWREV_8169SB		0x10000000
156 #define RE_HWREV_8169SC		0x18000000
157 #define RE_HWREV_8401E		0x24000000
158 #define RE_HWREV_8102EL		0x24800000
159 #define RE_HWREV_8168D		0x28000000
160 #define RE_HWREV_8168DP		0x28800000
161 #define RE_HWREV_8168E		0x2C000000	/* 8105E */
162 #define RE_HWREV_8168F		0x2C800000
163 #define RE_HWREV_8168B1		0x30000000
164 #define RE_HWREV_8100E		0x30800000
165 #define RE_HWREV_8101E		0x34000000
166 #define RE_HWREV_8102E		0x34800000
167 #define RE_HWREV_8168B2		0x38000000
168 #define RE_HWREV_8168C		0x3C000000
169 #define RE_HWREV_8168CP		0x3C800000
170 #define RE_HWREV_8105E		0x40800000
171 #define RE_HWREV_8402		0x44000000
172 #define RE_HWREV_8106E		0x44800000
173 #define RE_HWREV_8111F		0x48000000
174 #define RE_HWREV_8411		0x48800000
175 #define RE_HWREV_8168G		0x4C000000
176 #define RE_HWREV_8168EP		0x50000000
177 #define RE_HWREV_8168GU		0x50800000	/* 8106EUS */
178 #define RE_HWREV_8411B		0x5C800000
179 #define RE_HWREV_8139CPLUS	0x74800000
180 #define RE_HWREV_NULL		0xffffffff
181 
182 #define RE_TXDMA_16BYTES	0x00000000
183 #define RE_TXDMA_32BYTES	0x00000100
184 #define RE_TXDMA_64BYTES	0x00000200
185 #define RE_TXDMA_128BYTES	0x00000300
186 #define RE_TXDMA_256BYTES	0x00000400
187 #define RE_TXDMA_512BYTES	0x00000500
188 #define RE_TXDMA_1024BYTES	0x00000600
189 #define RE_TXDMA_2048BYTES	0x00000700
190 
191 /*
192  * Transmit descriptor status register bits.
193  */
194 #define RE_TXSTAT_LENMASK	0x00001FFF
195 #define RE_TXSTAT_OWN		0x00002000
196 #define RE_TXSTAT_TX_UNDERRUN	0x00004000
197 #define RE_TXSTAT_TX_OK		0x00008000
198 #define RE_TXSTAT_EARLY_THRESH	0x003F0000
199 #define RE_TXSTAT_COLLCNT	0x0F000000
200 #define RE_TXSTAT_CARR_HBEAT	0x10000000
201 #define RE_TXSTAT_OUTOFWIN	0x20000000
202 #define RE_TXSTAT_TXABRT	0x40000000
203 #define RE_TXSTAT_CARRLOSS	0x80000000
204 
205 /*
206  * Interrupt status register bits.
207  */
208 #define RE_ISR_RX_OK		0x0001
209 #define RE_ISR_RX_ERR		0x0002
210 #define RE_ISR_TX_OK		0x0004
211 #define RE_ISR_TX_ERR		0x0008
212 #define RE_ISR_RX_OVERRUN	0x0010
213 #define RE_ISR_LINKCHG		0x0020	/* 8169 only */
214 #define RE_ISR_FIFO_OFLOW	0x0040	/* 8139 only */
215 #define RE_ISR_TX_DESC_UNAVAIL	0x0080	/* C+ only */
216 #define RE_ISR_SWI		0x0100	/* C+ only */
217 #define RE_ISR_CABLE_LEN_CHGD	0x2000
218 #define RE_ISR_TIMEOUT_EXPIRED	0x4000
219 #define RE_ISR_SYSTEM_ERR	0x8000
220 
221 #define RE_INTRS \
222 	(RE_ISR_RX_OK|RE_ISR_RX_ERR|RE_ISR_TX_ERR| \
223 	RE_ISR_RX_OVERRUN|RE_ISR_FIFO_OFLOW|RE_ISR_LINKCHG| \
224 	RE_ISR_SYSTEM_ERR|RE_ISR_TX_OK)
225 
226 #define RE_INTRS_TIMER \
227 	(RE_ISR_RX_ERR|RE_ISR_TX_ERR| \
228 	RE_ISR_LINKCHG|RE_ISR_SYSTEM_ERR| \
229 	RE_ISR_TIMEOUT_EXPIRED)
230 
231 #ifdef RE_DIAG
232 #define RE_INTRS_DIAG \
233 	(RE_ISR_TX_OK|RE_ISR_RX_OK|RE_ISR_RX_ERR|RE_ISR_TX_ERR| \
234 	RE_ISR_RX_OVERRUN|RE_ISR_FIFO_OFLOW|RE_ISR_LINKCHG| \
235 	RE_ISR_SYSTEM_ERR)
236 #endif
237 
238 /*
239  * Media status register. (8139 only)
240  */
241 #define RE_MEDIASTAT_RXPAUSE	0x01
242 #define RE_MEDIASTAT_TXPAUSE	0x02
243 #define RE_MEDIASTAT_LINK	0x04
244 #define RE_MEDIASTAT_SPEED10	0x08
245 #define RE_MEDIASTAT_RXFLOWCTL	0x40	/* duplex mode */
246 #define RE_MEDIASTAT_TXFLOWCTL	0x80	/* duplex mode */
247 
248 /*
249  * Receive config register.
250  */
251 #define RE_RXCFG_RX_ALLPHYS	0x00000001	/* accept all nodes */
252 #define RE_RXCFG_RX_INDIV	0x00000002	/* match filter */
253 #define RE_RXCFG_RX_MULTI	0x00000004	/* accept all multicast */
254 #define RE_RXCFG_RX_BROAD	0x00000008	/* accept all broadcast */
255 #define RE_RXCFG_RX_RUNT	0x00000010
256 #define RE_RXCFG_RX_ERRPKT	0x00000020
257 #define RE_RXCFG_WRAP		0x00000080
258 #define RE_RXCFG_MAXDMA		0x00000700
259 #define RE_RXCFG_BUFSZ		0x00001800
260 #define RE_RXCFG_FIFOTHRESH	0x0000E000
261 #define RE_RXCFG_EARLYTHRESH	0x07000000
262 
263 #define RE_RXDMA_16BYTES	0x00000000
264 #define RE_RXDMA_32BYTES	0x00000100
265 #define RE_RXDMA_64BYTES	0x00000200
266 #define RE_RXDMA_128BYTES	0x00000300
267 #define RE_RXDMA_256BYTES	0x00000400
268 #define RE_RXDMA_512BYTES	0x00000500
269 #define RE_RXDMA_1024BYTES	0x00000600
270 #define RE_RXDMA_UNLIMITED	0x00000700
271 
272 #define RE_RXBUF_8		0x00000000
273 #define RE_RXBUF_16		0x00000800
274 #define RE_RXBUF_32		0x00001000
275 #define RE_RXBUF_64		0x00001800
276 
277 #define RE_RXFIFO_16BYTES	0x00000000
278 #define RE_RXFIFO_32BYTES	0x00002000
279 #define RE_RXFIFO_64BYTES	0x00004000
280 #define RE_RXFIFO_128BYTES	0x00006000
281 #define RE_RXFIFO_256BYTES	0x00008000
282 #define RE_RXFIFO_512BYTES	0x0000A000
283 #define RE_RXFIFO_1024BYTES	0x0000C000
284 #define RE_RXFIFO_NOTHRESH	0x0000E000
285 
286 /*
287  * Bits in RX status header (included with RX'ed packet
288  * in ring buffer).
289  */
290 #define RE_RXSTAT_RXOK		0x00000001
291 #define RE_RXSTAT_ALIGNERR	0x00000002
292 #define RE_RXSTAT_CRCERR	0x00000004
293 #define RE_RXSTAT_GIANT		0x00000008
294 #define RE_RXSTAT_RUNT		0x00000010
295 #define RE_RXSTAT_BADSYM	0x00000020
296 #define RE_RXSTAT_BROAD		0x00002000
297 #define RE_RXSTAT_INDIV		0x00004000
298 #define RE_RXSTAT_MULTI		0x00008000
299 #define RE_RXSTAT_LENMASK	0xFFFF0000
300 
301 #define RE_RXSTAT_UNFINISHED	0xFFF0		/* DMA still in progress */
302 /*
303  * Command register.
304  */
305 #define RE_CMD_EMPTY_RXBUF	0x0001
306 #define RE_CMD_TX_ENB		0x0004
307 #define RE_CMD_RX_ENB		0x0008
308 #define RE_CMD_RESET		0x0010
309 #define RE_CMD_STOPREQ		0x0080
310 
311 /*
312  * EEPROM control register
313  */
314 #define RE_EE_DATAOUT		0x01	/* Data out */
315 #define RE_EE_DATAIN		0x02	/* Data in */
316 #define RE_EE_CLK		0x04	/* clock */
317 #define RE_EE_SEL		0x08	/* chip select */
318 #define RE_EE_MODE		(0x40|0x80)
319 
320 #define RE_EEMODE_OFF		0x00
321 #define RE_EEMODE_AUTOLOAD	0x40
322 #define RE_EEMODE_PROGRAM	0x80
323 #define RE_EEMODE_WRITECFG	(0x80|0x40)
324 
325 /* 9346 EEPROM commands */
326 #define RE_9346_READ		0x6
327 #define RE_EECMD_WRITE		0x140
328 #define RE_EECMD_READ_6BIT	0x180
329 #define RE_EECMD_READ_8BIT	0x600
330 #define RE_EECMD_ERASE		0x1c0
331 
332 #define RE_EE_ID		0x00
333 #define RE_EE_PCI_VID		0x01
334 #define RE_EE_PCI_DID		0x02
335 /* Location of station address inside EEPROM */
336 #define RE_EE_EADDR0		0x07
337 #define RE_EE_EADDR1		0x01
338 
339 /*
340  * Config 0 register
341  */
342 #define RE_CFG0_ROM0		0x01
343 #define RE_CFG0_ROM1		0x02
344 #define RE_CFG0_ROM2		0x04
345 #define RE_CFG0_PL0		0x08
346 #define RE_CFG0_PL1		0x10
347 #define RE_CFG0_10MBPS		0x20	/* 10 Mbps internal mode */
348 #define RE_CFG0_PCS		0x40
349 #define RE_CFG0_SCR		0x80
350 
351 /*
352  * Config 1 register
353  */
354 #define RE_CFG1_PWRDWN		0x01
355 #define RE_CFG1_SLEEP		0x02
356 #define RE_CFG1_IOMAP		0x04
357 #define RE_CFG1_MEMMAP		0x08
358 #define RE_CFG1_RSVD		0x10
359 #define RE_CFG1_DRVLOAD		0x20
360 #define RE_CFG1_LED0		0x40
361 #define RE_CFG1_FULLDUPLEX	0x40	/* 8129 only */
362 #define RE_CFG1_LED1		0x80
363 
364 /*
365  * 8139C+ register definitions
366  */
367 
368 /* RE_DUMPSTATS_LO register */
369 
370 #define RE_DUMPSTATS_START	0x00000008
371 
372 /* Transmit start register */
373 
374 #define RE_TXSTART_SWI		0x01	/* generate TX interrupt */
375 #define RE_TXSTART_START	0x40	/* start normal queue transmit */
376 #define RE_TXSTART_HPRIO_START	0x80	/* start hi prio queue transmit */
377 
378 /*
379  * Config 2 register, 8139C+/8169/8169S/8110S only
380  */
381 #define RE_CFG2_BUSFREQ		0x07
382 #define RE_CFG2_BUSWIDTH	0x08
383 #define RE_CFG2_AUXPWRSTS	0x10
384 
385 #define RE_BUSFREQ_33MHZ	0x00
386 #define RE_BUSFREQ_66MHZ	0x01
387 
388 #define RE_BUSWIDTH_32BITS	0x00
389 #define RE_BUSWIDTH_64BITS	0x08
390 
391 /* C+ mode command register */
392 
393 #define RE_CPLUSCMD_TXENB	0x0001	/* enable C+ transmit mode */
394 #define RE_CPLUSCMD_RXENB	0x0002	/* enable C+ receive mode */
395 #define RE_CPLUSCMD_PCI_MRW	0x0008	/* enable PCI multi-read/write */
396 #define RE_CPLUSCMD_PCI_DAC	0x0010	/* PCI dual-address cycle only */
397 #define RE_CPLUSCMD_RXCSUM_ENB	0x0020	/* enable RX checksum offload */
398 #define RE_CPLUSCMD_VLANSTRIP	0x0040	/* enable VLAN tag stripping */
399 
400 /* C+ early transmit threshold */
401 
402 #define RE_EARLYTXTHRESH_CNT	0x003F	/* byte count times 8 */
403 
404 /*
405  * Gigabit PHY access register (8169 only)
406  */
407 
408 #define RE_PHYAR_PHYDATA	0x0000FFFF
409 #define RE_PHYAR_PHYREG		0x001F0000
410 #define RE_PHYAR_BUSY		0x80000000
411 
412 /*
413  * Gigabit media status (8169 only)
414  */
415 #define RE_GMEDIASTAT_FDX	0x01	/* full duplex */
416 #define RE_GMEDIASTAT_LINK	0x02	/* link up */
417 #define RE_GMEDIASTAT_10MBPS	0x04	/* 10mps link */
418 #define RE_GMEDIASTAT_100MBPS	0x08	/* 100mbps link */
419 #define RE_GMEDIASTAT_1000MBPS	0x10	/* gigE link */
420 #define RE_GMEDIASTAT_RXFLOW	0x20	/* RX flow control on */
421 #define RE_GMEDIASTAT_TXFLOW	0x40	/* TX flow control on */
422 #define RE_GMEDIASTAT_TBI	0x80	/* TBI enabled */
423 
424 /*
425  * The RealTek doesn't use a fragment-based descriptor mechanism.
426  * Instead, there are only four register sets, each or which represents
427  * one 'descriptor.' Basically, each TX descriptor is just a contiguous
428  * packet buffer (32-bit aligned!) and we place the buffer addresses in
429  * the registers so the chip knows where they are.
430  *
431  * We can sort of kludge together the same kind of buffer management
432  * used in previous drivers, but we have to do buffer copies almost all
433  * the time, so it doesn't really buy us much.
434  *
435  * For reception, there's just one large buffer where the chip stores
436  * all received packets.
437  */
438 
439 #define RE_RX_BUF_SZ		RE_RXBUF_64
440 #define RE_RXBUFLEN		(1 << ((RE_RX_BUF_SZ >> 11) + 13))
441 #define RE_TX_LIST_CNT		4
442 #define RE_MIN_FRAMELEN		60
443 #define RE_TXTHRESH(x)		((x) << 11)
444 #define RE_TX_THRESH_INIT	96
445 #define RE_RX_FIFOTHRESH	RE_RXFIFO_NOTHRESH
446 #define RE_RX_MAXDMA		RE_RXDMA_UNLIMITED
447 #define RE_TX_MAXDMA		RE_TXDMA_2048BYTES
448 
449 #define RE_RXCFG_CONFIG (RE_RX_FIFOTHRESH|RE_RX_MAXDMA|RE_RX_BUF_SZ)
450 #define RE_TXCFG_CONFIG	(RE_TXCFG_IFG|RE_TX_MAXDMA)
451 
452 #define RE_IM_MAGIC		0x5050
453 #define RE_IM_RXTIME(t)		((t) & 0xf)
454 #define RE_IM_TXTIME(t)		(((t) & 0xf) << 8)
455 
456 #if 0
457 struct re_mii_frame {
458 	uint8_t			mii_stdelim;
459 	uint8_t			mii_opcode;
460 	uint8_t			mii_phyaddr;
461 	uint8_t			mii_regaddr;
462 	uint8_t			mii_turnaround;
463 	uint16_t		mii_data;
464 };
465 #endif
466 
467 /*
468  * MII constants
469  */
470 #define RE_MII_STARTDELIM	0x01
471 #define RE_MII_READOP		0x02
472 #define RE_MII_WRITEOP		0x01
473 #define RE_MII_TURNAROUND	0x02
474 
475 /*
476  * The 8139C+ and 8160 gigE chips support descriptor-based TX
477  * and RX. In fact, they even support TCP large send. Descriptors
478  * must be allocated in contiguous blocks that are aligned on a
479  * 256-byte boundary. The rings can hold a maximum of 64 descriptors.
480  */
481 
482 /*
483  * RX/TX descriptor definition. When large send mode is enabled, the
484  * lower 11 bits of the TX re_cmd word are used to hold the MSS, and
485  * the checksum offload bits are disabled. The structure layout is
486  * the same for RX and TX descriptors
487  */
488 
489 struct re_desc {
490 	uint32_t		re_cmdstat;
491 	uint32_t		re_control;
492 	uint32_t		re_bufaddr_lo;
493 	uint32_t		re_bufaddr_hi;
494 };
495 
496 #define RE_TDESC_CMD_FRAGLEN	0x0000FFFF
497 #define RE_TDESC_CMD_TCPCSUM	0x00010000	/* TCP checksum enable */
498 #define RE_TDESC_CMD_UDPCSUM	0x00020000	/* UDP checksum enable */
499 #define RE_TDESC_CMD_IPCSUM	0x00040000	/* IP header checksum enable */
500 #define RE_TDESC_CMD_MSSVAL	0x07FF0000	/* Large send MSS value */
501 #define RE_TDESC_CMD_LGSEND	0x08000000	/* TCP large send enb */
502 #define RE_TDESC_CMD_EOF	0x10000000	/* end of frame marker */
503 #define RE_TDESC_CMD_SOF	0x20000000	/* start of frame marker */
504 #define RE_TDESC_CMD_EOR	0x40000000	/* end of ring marker */
505 #define RE_TDESC_CMD_OWN	0x80000000	/* chip owns descriptor */
506 
507 #define RE_TDESC_CTL_INSTAG	0x00020000	/* Insert VLAN tag */
508 #define RE_TDESC_CTL_TAGDATA	0x0000FFFF	/* TAG data */
509 #define RE_TDESC_CTL_IPCSUM	0x20000000	/* IP header csum, MAC2 only */
510 #define RE_TDESC_CTL_TCPCSUM	0x60000000	/* TCP csum, MAC2 only */
511 #define RE_TDESC_CTL_UDPCSUM	0xa0000000	/* UDP csum, MAC2 only */
512 
513 /*
514  * Error bits are valid only on the last descriptor of a frame
515  * (i.e. RE_TDESC_CMD_EOF == 1)
516  */
517 
518 #define RE_TDESC_STAT_COLCNT	0x000F0000	/* collision count */
519 #define RE_TDESC_STAT_EXCESSCOL	0x00100000	/* excessive collisions */
520 #define RE_TDESC_STAT_LINKFAIL	0x00200000	/* link faulure */
521 #define RE_TDESC_STAT_OWINCOL	0x00400000	/* out-of-window collision */
522 #define RE_TDESC_STAT_TXERRSUM	0x00800000	/* transmit error summary */
523 #define RE_TDESC_STAT_UNDERRUN	0x02000000	/* TX underrun occured */
524 #define RE_TDESC_STAT_OWN	0x80000000
525 
526 /*
527  * RX descriptor cmd/vlan definitions
528  */
529 
530 #define RE_RDESC_CMD_EOR	0x40000000
531 #define RE_RDESC_CMD_OWN	0x80000000
532 #define RE_RDESC_CMD_BUFLEN	0x00001FFF
533 
534 #define RE_RDESC_STAT_OWN	0x80000000
535 #define RE_RDESC_STAT_EOR	0x40000000
536 #define RE_RDESC_STAT_SOF	0x20000000
537 #define RE_RDESC_STAT_EOF	0x10000000
538 #define RE_RDESC_STAT_FRALIGN	0x08000000	/* frame alignment error */
539 #define RE_RDESC_STAT_MCAST	0x04000000	/* multicast pkt received */
540 #define RE_RDESC_STAT_UCAST	0x02000000	/* unicast pkt received */
541 #define RE_RDESC_STAT_BCAST	0x01000000	/* broadcast pkt received */
542 #define RE_RDESC_STAT_BUFOFLOW	0x00800000	/* out of buffer space */
543 #define RE_RDESC_STAT_FIFOOFLOW	0x00400000	/* FIFO overrun */
544 #define RE_RDESC_STAT_GIANT	0x00200000	/* pkt > 4096 bytes */
545 #define RE_RDESC_STAT_RXERRSUM	0x00100000	/* RX error summary */
546 #define RE_RDESC_STAT_RUNT	0x00080000	/* runt packet received */
547 #define RE_RDESC_STAT_CRCERR	0x00040000	/* CRC error */
548 #define RE_RDESC_STAT_PROTOID	0x00030000	/* Protocol type */
549 #define RE_RDESC_STAT_IPSUMBAD	0x00008000	/* IP header checksum bad */
550 #define RE_RDESC_STAT_UDPSUMBAD	0x00004000	/* UDP checksum bad */
551 #define RE_RDESC_STAT_TCPSUMBAD	0x00002000	/* TCP checksum bad */
552 #define RE_RDESC_STAT_FRAGLEN	0x00001FFF	/* RX'ed frame/frag len */
553 #define RE_RDESC_STAT_GFRAGLEN	0x00003FFF	/* RX'ed frame/frag len */
554 
555 #define RE_RDESC_CTL_HASTAG	0x00010000	/* VLAN tag available
556 						   (TAG data valid) */
557 #define RE_RDESC_CTL_TAGDATA	0x0000FFFF	/* TAG data */
558 #define RE_RDESC_CTL_PROTOIP4	0x40000000	/* IPv4 packet, MAC2 only */
559 #define RE_RDESC_CTL_PROTOIP6	0x80000000	/* IPv6 packet, MAC2 only */
560 
561 #define RE_PROTOID_NONIP	0x00000000
562 #define RE_PROTOID_TCPIP	0x00010000
563 #define RE_PROTOID_UDPIP	0x00020000
564 #define RE_PROTOID_IP		0x00030000
565 #define RE_TCPPKT(x)		(((x) & RE_RDESC_STAT_PROTOID) == \
566 				 RE_PROTOID_TCPIP)
567 #define RE_UDPPKT(x)		(((x) & RE_RDESC_STAT_PROTOID) == \
568 				 RE_PROTOID_UDPIP)
569 
570 /*
571  * Statistics counter structure (8139C+ and 8169 only)
572  */
573 struct re_stats {
574 	uint32_t		re_tx_pkts_lo;
575 	uint32_t		re_tx_pkts_hi;
576 	uint32_t		re_tx_errs_lo;
577 	uint32_t		re_tx_errs_hi;
578 	uint32_t		re_tx_errs;
579 	uint16_t		re_missed_pkts;
580 	uint16_t		re_rx_framealign_errs;
581 	uint32_t		re_tx_onecoll;
582 	uint32_t		re_tx_multicolls;
583 	uint32_t		re_rx_ucasts_hi;
584 	uint32_t		re_rx_ucasts_lo;
585 	uint32_t		re_rx_bcasts_lo;
586 	uint32_t		re_rx_bcasts_hi;
587 	uint32_t		re_rx_mcasts;
588 	uint16_t		re_tx_aborts;
589 	uint16_t		re_rx_underruns;
590 };
591 
592 /*
593  * General constants that are fun to know.
594  *
595  * PCI low memory base and low I/O base register, and
596  * other PCI registers.
597  */
598 
599 #define RE_PCI_LOMEM		0x14
600 #define RE_PCI_LOIO		0x10
601 
602 #define PCI_SUBDEVICE_LINKSYS_EG1032_REV3	0x0024
603 #define PCI_REVID_REALTEK_RT8139CP		0x20
604