xref: /dragonfly/sys/dev/netif/ste/if_stereg.h (revision 7b0266d8)
1 /*
2  * Copyright (c) 1997, 1998, 1999
3  *	Bill Paul <wpaul@ctr.columbia.edu>.  All rights reserved.
4  *
5  * Redistribution and use in source and binary forms, with or without
6  * modification, are permitted provided that the following conditions
7  * are met:
8  * 1. Redistributions of source code must retain the above copyright
9  *    notice, this list of conditions and the following disclaimer.
10  * 2. Redistributions in binary form must reproduce the above copyright
11  *    notice, this list of conditions and the following disclaimer in the
12  *    documentation and/or other materials provided with the distribution.
13  * 3. All advertising materials mentioning features or use of this software
14  *    must display the following acknowledgement:
15  *	This product includes software developed by Bill Paul.
16  * 4. Neither the name of the author nor the names of any co-contributors
17  *    may be used to endorse or promote products derived from this software
18  *    without specific prior written permission.
19  *
20  * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
21  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
22  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
23  * ARE DISCLAIMED.  IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
24  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
25  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
26  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
27  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
28  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
29  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
30  * THE POSSIBILITY OF SUCH DAMAGE.
31  *
32  * $FreeBSD: src/sys/pci/if_stereg.h,v 1.5.2.3 2002/08/21 15:26:01 ambrisko Exp $
33  * $DragonFly: src/sys/dev/netif/ste/if_stereg.h,v 1.3 2004/09/15 00:53:29 joerg Exp $
34  */
35 
36 /*
37  * Sundance PCI device/vendor ID for the
38  * ST201 chip.
39  */
40 #define ST_VENDORID		0x13F0
41 #define ST_DEVICEID_ST201	0x0201
42 
43 /*
44  * D-Link PCI device/vendor ID for the DFE-550TX.
45  */
46 #define DL_VENDORID		0x1186
47 #define DL_DEVICEID_550TX	0x1002
48 
49 /*
50  * Register definitions for the Sundance Technologies ST201 PCI
51  * fast ethernet controller. The register space is 128 bytes long and
52  * can be accessed using either PCI I/O space or PCI memory mapping.
53  * There are 32-bit, 16-bit and 8-bit registers.
54  */
55 
56 #define STE_DMACTL		0x00
57 #define STE_TX_DMALIST_PTR	0x04
58 #define STE_TX_DMABURST_THRESH	0x08
59 #define STE_TX_DMAURG_THRESH	0x09
60 #define STE_TX_DMAPOLL_PERIOD	0x0A
61 #define STE_RX_DMASTATUS	0x0C
62 #define STE_RX_DMALIST_PTR	0x10
63 #define STE_RX_DMABURST_THRESH	0x14
64 #define STE_RX_DMAURG_THRESH	0x15
65 #define STE_RX_DMAPOLL_PERIOD	0x16
66 #define STE_DEBUGCTL		0x1A
67 #define STE_ASICCTL		0x30
68 #define STE_EEPROM_DATA		0x34
69 #define STE_EEPROM_CTL		0x36
70 #define STE_FIFOCTL		0x3A
71 #define STE_TX_STARTTHRESH	0x3C
72 #define STE_RX_EARLYTHRESH	0x3E
73 #define STE_EXT_ROMADDR		0x40
74 #define STE_EXT_ROMDATA		0x44
75 #define STE_WAKE_EVENT		0x45
76 #define STE_TX_STATUS		0x46
77 #define STE_TX_FRAMEID		0x47
78 #define STE_COUNTDOWN		0x48
79 #define STE_ISR_ACK		0x4A
80 #define STE_IMR			0x4C
81 #define STE_ISR			0x4E
82 #define STE_MACCTL0		0x50
83 #define STE_MACCTL1		0x52
84 #define STE_PAR0		0x54
85 #define STE_PAR1		0x56
86 #define STE_PAR2		0x58
87 #define STE_MAX_FRAMELEN	0x5A
88 #define STE_RX_MODE		0x5C
89 #define STE_TX_RECLAIM_THRESH	0x5D
90 #define STE_PHYCTL		0x5E
91 #define STE_MAR0		0x60
92 #define STE_MAR1		0x62
93 #define STE_MAR2		0x64
94 #define STE_MAR3		0x66
95 #define STE_STATS		0x68
96 
97 #define STE_LATE_COLLS  0x75
98 #define STE_MULTI_COLLS	0x76
99 #define STE_SINGLE_COLLS 0x77
100 
101 #define STE_DMACTL_RXDMA_STOPPED	0x00000001
102 #define STE_DMACTL_TXDMA_CMPREQ		0x00000002
103 #define STE_DMACTL_TXDMA_STOPPED	0x00000004
104 #define STE_DMACTL_RXDMA_COMPLETE	0x00000008
105 #define STE_DMACTL_TXDMA_COMPLETE	0x00000010
106 #define STE_DMACTL_RXDMA_STALL		0x00000100
107 #define STE_DMACTL_RXDMA_UNSTALL	0x00000200
108 #define STE_DMACTL_TXDMA_STALL		0x00000400
109 #define STE_DMACTL_TXDMA_UNSTALL	0x00000800
110 #define STE_DMACTL_TXDMA_INPROG		0x00004000
111 #define STE_DMACTL_DMA_HALTINPROG	0x00008000
112 #define STE_DMACTL_RXEARLY_ENABLE	0x00020000
113 #define STE_DMACTL_COUNTDOWN_SPEED	0x00040000
114 #define STE_DMACTL_COUNTDOWN_MODE	0x00080000
115 #define STE_DMACTL_MWI_DISABLE		0x00100000
116 #define STE_DMACTL_RX_DISCARD_OFLOWS	0x00400000
117 #define STE_DMACTL_COUNTDOWN_ENABLE	0x00800000
118 #define STE_DMACTL_TARGET_ABORT		0x40000000
119 #define STE_DMACTL_MASTER_ABORT		0x80000000
120 
121 /*
122  * TX DMA burst thresh is the number of 32-byte blocks that
123  * must be loaded into the TX Fifo before a TXDMA burst request
124  * will be issued.
125  */
126 #define STE_TXDMABURST_THRESH		0x1F
127 
128 /*
129  * The number of 32-byte blocks in the TX FIFO falls below the
130  * TX DMA urgent threshold, a TX DMA urgent request will be
131  * generated.
132  */
133 #define STE_TXDMAURG_THRESH		0x3F
134 
135 /*
136  * Number of 320ns intervals between polls of the TXDMA next
137  * descriptor pointer (if we're using polling mode).
138  */
139 #define STE_TXDMA_POLL_PERIOD		0x7F
140 
141 #define STE_RX_DMASTATUS_FRAMELEN	0x00001FFF
142 #define STE_RX_DMASTATUS_RXERR		0x00004000
143 #define STE_RX_DMASTATUS_DMADONE	0x00008000
144 #define STE_RX_DMASTATUS_FIFO_OFLOW	0x00010000
145 #define STE_RX_DMASTATUS_RUNT		0x00020000
146 #define STE_RX_DMASTATUS_ALIGNERR	0x00040000
147 #define STE_RX_DMASTATUS_CRCERR		0x00080000
148 #define STE_RX_DMASTATUS_GIANT		0x00100000
149 #define STE_RX_DMASTATUS_DRIBBLE	0x00800000
150 #define STE_RX_DMASTATUS_DMA_OFLOW	0x01000000
151 
152 /*
153  * RX DMA burst thresh is the number of 32-byte blocks that
154  * must be present in the RX FIFO before a RXDMA bus master
155  * request will be issued.
156  */
157 #define STE_RXDMABURST_THRESH		0xFF
158 
159 /*
160  * The number of 32-byte blocks in the RX FIFO falls below the
161  * RX DMA urgent threshold, a RX DMA urgent request will be
162  * generated.
163  */
164 #define STE_RXDMAURG_THRESH		0x1F
165 
166 /*
167  * Number of 320ns intervals between polls of the RXDMA complete
168  * bit in the status field on the current RX descriptor (if we're
169  * using polling mode).
170  */
171 #define STE_RXDMA_POLL_PERIOD		0x7F
172 
173 #define STE_DEBUGCTL_GPIO0_CTL		0x0001
174 #define STE_DEBUGCTL_GPIO1_CTL		0x0002
175 #define STE_DEBUGCTL_GPIO0_DATA		0x0004
176 #define STE_DEBUGCTL_GPIO1_DATA		0x0008
177 
178 #define STE_ASICCTL_ROMSIZE		0x00000002
179 #define STE_ASICCTL_TX_LARGEPKTS	0x00000004
180 #define STE_ASICCTL_RX_LARGEPKTS	0x00000008
181 #define STE_ASICCTL_EXTROM_DISABLE	0x00000010
182 #define STE_ASICCTL_PHYSPEED_10		0x00000020
183 #define STE_ASICCTL_PHYSPEED_100	0x00000040
184 #define STE_ASICCTL_PHYMEDIA		0x00000080
185 #define STE_ASICCTL_FORCEDCONFIG	0x00000700
186 #define STE_ASICCTL_D3RESET_DISABLE	0x00000800
187 #define STE_ASICCTL_SPEEDUPMODE		0x00002000
188 #define STE_ASICCTL_LEDMODE		0x00004000
189 #define STE_ASICCTL_RSTOUT_POLARITY	0x00008000
190 #define STE_ASICCTL_GLOBAL_RESET	0x00010000
191 #define STE_ASICCTL_RX_RESET		0x00020000
192 #define STE_ASICCTL_TX_RESET		0x00040000
193 #define STE_ASICCTL_DMA_RESET		0x00080000
194 #define STE_ASICCTL_FIFO_RESET		0x00100000
195 #define STE_ASICCTL_NETWORK_RESET	0x00200000
196 #define STE_ASICCTL_HOST_RESET		0x00400000
197 #define STE_ASICCTL_AUTOINIT_RESET	0x00800000
198 #define STE_ASICCTL_EXTRESET_RESET	0x01000000
199 #define STE_ASICCTL_SOFTINTR		0x02000000
200 #define STE_ASICCTL_RESET_BUSY		0x04000000
201 
202 #define STE_ASICCTL1_GLOBAL_RESET	0x0001
203 #define STE_ASICCTL1_RX_RESET		0x0002
204 #define STE_ASICCTL1_TX_RESET		0x0004
205 #define STE_ASICCTL1_DMA_RESET		0x0008
206 #define STE_ASICCTL1_FIFO_RESET		0x0010
207 #define STE_ASICCTL1_NETWORK_RESET	0x0020
208 #define STE_ASICCTL1_HOST_RESET		0x0040
209 #define STE_ASICCTL1_AUTOINIT_RESET	0x0080
210 #define STE_ASICCTL1_EXTRESET_RESET	0x0100
211 #define STE_ASICCTL1_SOFTINTR		0x0200
212 #define STE_ASICCTL1_RESET_BUSY		0x0400
213 
214 #define STE_EECTL_ADDR			0x00FF
215 #define STE_EECTL_OPCODE		0x0300
216 #define STE_EECTL_BUSY			0x1000
217 
218 #define STE_EEOPCODE_WRITE		0x0100
219 #define STE_EEOPCODE_READ		0x0200
220 #define STE_EEOPCODE_ERASE		0x0300
221 
222 #define STE_FIFOCTL_RAMTESTMODE		0x0001
223 #define STE_FIFOCTL_OVERRUNMODE		0x0200
224 #define STE_FIFOCTL_RXFIFOFULL		0x0800
225 #define STE_FIFOCTL_TX_BUSY		0x4000
226 #define STE_FIFOCTL_RX_BUSY		0x8000
227 
228 /*
229  * The number of bytes that must in present in the TX FIFO before
230  * transmission begins. Value should be in increments of 4 bytes.
231  */
232 #define STE_TXSTART_THRESH		0x1FFC
233 
234 /*
235  * Number of bytes that must be present in the RX FIFO before
236  * an RX EARLY interrupt is generated.
237  */
238 #define STE_RXEARLY_THRESH		0x1FFC
239 
240 #define STE_WAKEEVENT_WAKEPKT_ENB	0x01
241 #define STE_WAKEEVENT_MAGICPKT_ENB	0x02
242 #define STE_WAKEEVENT_LINKEVT_ENB	0x04
243 #define STE_WAKEEVENT_WAKEPOLARITY	0x08
244 #define STE_WAKEEVENT_WAKEPKTEVENT	0x10
245 #define STE_WAKEEVENT_MAGICPKTEVENT	0x20
246 #define STE_WAKEEVENT_LINKEVENT		0x40
247 #define STE_WAKEEVENT_WAKEONLAN_ENB	0x80
248 
249 #define STE_TXSTATUS_RECLAIMERR		0x02
250 #define STE_TXSTATUS_STATSOFLOW		0x04
251 #define STE_TXSTATUS_EXCESSCOLLS	0x08
252 #define STE_TXSTATUS_UNDERRUN		0x10
253 #define STE_TXSTATUS_TXINTR_REQ		0x40
254 #define STE_TXSTATUS_TXDONE		0x80
255 
256 #define STE_ISRACK_INTLATCH		0x0001
257 #define STE_ISRACK_HOSTERR		0x0002
258 #define STE_ISRACK_TX_DONE		0x0004
259 #define STE_ISRACK_MACCTL_FRAME		0x0008
260 #define STE_ISRACK_RX_DONE		0x0010
261 #define STE_ISRACK_RX_EARLY		0x0020
262 #define STE_ISRACK_SOFTINTR		0x0040
263 #define STE_ISRACK_STATS_OFLOW		0x0080
264 #define STE_ISRACK_LINKEVENT		0x0100
265 #define STE_ISRACK_TX_DMADONE		0x0200
266 #define STE_ISRACK_RX_DMADONE		0x0400
267 
268 #define STE_IMR_HOSTERR			0x0002
269 #define STE_IMR_TX_DONE			0x0004
270 #define STE_IMR_MACCTL_FRAME		0x0008
271 #define STE_IMR_RX_DONE			0x0010
272 #define STE_IMR_RX_EARLY		0x0020
273 #define STE_IMR_SOFTINTR		0x0040
274 #define STE_IMR_STATS_OFLOW		0x0080
275 #define STE_IMR_LINKEVENT		0x0100
276 #define STE_IMR_TX_DMADONE		0x0200
277 #define STE_IMR_RX_DMADONE		0x0400
278 
279 #define STE_INTRS					\
280 	(STE_IMR_RX_DMADONE|STE_IMR_TX_DMADONE|	\
281 	STE_IMR_TX_DONE|STE_IMR_HOSTERR| \
282         STE_IMR_LINKEVENT)
283 
284 #define STE_ISR_INTLATCH		0x0001
285 #define STE_ISR_HOSTERR			0x0002
286 #define STE_ISR_TX_DONE			0x0004
287 #define STE_ISR_MACCTL_FRAME		0x0008
288 #define STE_ISR_RX_DONE			0x0010
289 #define STE_ISR_RX_EARLY		0x0020
290 #define STE_ISR_SOFTINTR		0x0040
291 #define STE_ISR_STATS_OFLOW		0x0080
292 #define STE_ISR_LINKEVENT		0x0100
293 #define STE_ISR_TX_DMADONE		0x0200
294 #define STE_ISR_RX_DMADONE		0x0400
295 
296 /*
297  * Note: the Sundance manual gives the impression that the's
298  * only one 32-bit MACCTL register. In fact, there are two
299  * 16-bit registers side by side, and you have to access them
300  * separately.
301  */
302 #define STE_MACCTL0_IPG			0x0003
303 #define STE_MACCTL0_FULLDUPLEX		0x0020
304 #define STE_MACCTL0_RX_GIANTS		0x0040
305 #define STE_MACCTL0_FLOWCTL_ENABLE	0x0100
306 #define STE_MACCTL0_RX_FCS		0x0200
307 #define STE_MACCTL0_FIFOLOOPBK		0x0400
308 #define STE_MACCTL0_MACLOOPBK		0x0800
309 
310 #define STE_MACCTL1_COLLDETECT		0x0001
311 #define STE_MACCTL1_CARRSENSE		0x0002
312 #define STE_MACCTL1_TX_BUSY		0x0004
313 #define STE_MACCTL1_TX_ERROR		0x0008
314 #define STE_MACCTL1_STATS_ENABLE	0x0020
315 #define STE_MACCTL1_STATS_DISABLE	0x0040
316 #define STE_MACCTL1_STATS_ENABLED	0x0080
317 #define STE_MACCTL1_TX_ENABLE		0x0100
318 #define STE_MACCTL1_TX_DISABLE		0x0200
319 #define STE_MACCTL1_TX_ENABLED		0x0400
320 #define STE_MACCTL1_RX_ENABLE		0x0800
321 #define STE_MACCTL1_RX_DISABLE		0x1000
322 #define STE_MACCTL1_RX_ENABLED		0x2000
323 #define STE_MACCTL1_PAUSED		0x4000
324 
325 #define STE_IPG_96BT			0x00000000
326 #define STE_IPG_128BT			0x00000001
327 #define STE_IPG_224BT			0x00000002
328 #define STE_IPG_544BT			0x00000003
329 
330 #define STE_RXMODE_UNICAST		0x01
331 #define STE_RXMODE_ALLMULTI		0x02
332 #define STE_RXMODE_BROADCAST		0x04
333 #define STE_RXMODE_PROMISC		0x08
334 #define STE_RXMODE_MULTIHASH		0x10
335 #define STE_RXMODE_ALLIPMULTI		0x20
336 
337 #define STE_PHYCTL_MCLK			0x01
338 #define STE_PHYCTL_MDATA		0x02
339 #define STE_PHYCTL_MDIR			0x04
340 #define STE_PHYCTL_CLK25_DISABLE	0x08
341 #define STE_PHYCTL_DUPLEXPOLARITY	0x10
342 #define STE_PHYCTL_DUPLEXSTAT		0x20
343 #define STE_PHYCTL_SPEEDSTAT		0x40
344 #define STE_PHYCTL_LINKSTAT		0x80
345 
346 /*
347  * EEPROM offsets.
348  */
349 #define STE_EEADDR_CONFIGPARM		0x00
350 #define STE_EEADDR_ASICCTL		0x02
351 #define STE_EEADDR_SUBSYS_ID		0x04
352 #define STE_EEADDR_SUBVEN_ID		0x08
353 
354 #define STE_EEADDR_NODE0		0x10
355 #define STE_EEADDR_NODE1		0x12
356 #define STE_EEADDR_NODE2		0x14
357 
358 /* PCI registers */
359 #define STE_PCI_VENDOR_ID		0x00
360 #define STE_PCI_DEVICE_ID		0x02
361 #define STE_PCI_COMMAND			0x04
362 #define STE_PCI_STATUS			0x06
363 #define STE_PCI_CLASSCODE		0x09
364 #define STE_PCI_LATENCY_TIMER		0x0D
365 #define STE_PCI_HEADER_TYPE		0x0E
366 #define STE_PCI_LOIO			0x10
367 #define STE_PCI_LOMEM			0x14
368 #define STE_PCI_BIOSROM			0x30
369 #define STE_PCI_INTLINE			0x3C
370 #define STE_PCI_INTPIN			0x3D
371 #define STE_PCI_MINGNT			0x3E
372 #define STE_PCI_MINLAT			0x0F
373 
374 #define STE_PCI_CAPID			0x50 /* 8 bits */
375 #define STE_PCI_NEXTPTR			0x51 /* 8 bits */
376 #define STE_PCI_PWRMGMTCAP		0x52 /* 16 bits */
377 #define STE_PCI_PWRMGMTCTRL		0x54 /* 16 bits */
378 
379 #define STE_PSTATE_MASK			0x0003
380 #define STE_PSTATE_D0			0x0000
381 #define STE_PSTATE_D1			0x0002
382 #define STE_PSTATE_D2			0x0002
383 #define STE_PSTATE_D3			0x0003
384 #define STE_PME_EN			0x0010
385 #define STE_PME_STATUS			0x8000
386 
387 
388 struct ste_stats {
389 	u_int32_t		ste_rx_bytes;
390 	u_int32_t		ste_tx_bytes;
391 	u_int16_t		ste_tx_frames;
392 	u_int16_t		ste_rx_frames;
393 	u_int8_t		ste_carrsense_errs;
394 	u_int8_t		ste_late_colls;
395 	u_int8_t		ste_multi_colls;
396 	u_int8_t		ste_single_colls;
397 	u_int8_t		ste_tx_frames_defered;
398 	u_int8_t		ste_rx_lost_frames;
399 	u_int8_t		ste_tx_excess_defers;
400 	u_int8_t		ste_tx_abort_excess_colls;
401 	u_int8_t		ste_tx_bcast_frames;
402 	u_int8_t		ste_rx_bcast_frames;
403 	u_int8_t		ste_tx_mcast_frames;
404 	u_int8_t		ste_rx_mcast_frames;
405 };
406 
407 struct ste_frag {
408 	u_int32_t		ste_addr;
409 	u_int32_t		ste_len;
410 };
411 
412 #define STE_FRAG_LAST		0x80000000
413 #define STE_FRAG_LEN		0x00001FFF
414 
415 #define STE_MAXFRAGS	8
416 
417 struct ste_desc {
418 	u_int32_t		ste_next;
419 	u_int32_t		ste_ctl;
420 	struct ste_frag		ste_frags[STE_MAXFRAGS];
421 };
422 
423 struct ste_desc_onefrag {
424 	u_int32_t		ste_next;
425 	u_int32_t		ste_status;
426 	struct ste_frag		ste_frag;
427 };
428 
429 #define STE_TXCTL_WORDALIGN	0x00000003
430 #define STE_TXCTL_FRAMEID	0x000003FC
431 #define STE_TXCTL_NOCRC		0x00002000
432 #define STE_TXCTL_TXINTR	0x00008000
433 #define STE_TXCTL_DMADONE	0x00010000
434 #define STE_TXCTL_DMAINTR	0x80000000
435 
436 #define STE_RXSTAT_FRAMELEN	0x00001FFF
437 #define STE_RXSTAT_FRAME_ERR	0x00004000
438 #define STE_RXSTAT_DMADONE	0x00008000
439 #define STE_RXSTAT_FIFO_OFLOW	0x00010000
440 #define STE_RXSTAT_RUNT		0x00020000
441 #define STE_RXSTAT_ALIGNERR	0x00040000
442 #define STE_RXSTAT_CRCERR	0x00080000
443 #define STE_RXSTAT_GIANT	0x00100000
444 #define STE_RXSTAT_DRIBBLEBITS	0x00800000
445 #define STE_RXSTAT_DMA_OFLOW	0x01000000
446 #define STE_RXATAT_ONEBUF	0x10000000
447 
448 /*
449  * register space access macros
450  */
451 #define CSR_WRITE_4(sc, reg, val)	\
452 	bus_space_write_4(sc->ste_btag, sc->ste_bhandle, reg, val)
453 #define CSR_WRITE_2(sc, reg, val)	\
454 	bus_space_write_2(sc->ste_btag, sc->ste_bhandle, reg, val)
455 #define CSR_WRITE_1(sc, reg, val)	\
456 	bus_space_write_1(sc->ste_btag, sc->ste_bhandle, reg, val)
457 
458 #define CSR_READ_4(sc, reg)		\
459 	bus_space_read_4(sc->ste_btag, sc->ste_bhandle, reg)
460 #define CSR_READ_2(sc, reg)		\
461 	bus_space_read_2(sc->ste_btag, sc->ste_bhandle, reg)
462 #define CSR_READ_1(sc, reg)		\
463 	bus_space_read_1(sc->ste_btag, sc->ste_bhandle, reg)
464 
465 #define STE_TIMEOUT		1000
466 #define STE_MIN_FRAMELEN	60
467 #define STE_PACKET_SIZE		1536
468 #define ETHER_ALIGN		2
469 #define STE_RX_LIST_CNT		64
470 #define STE_TX_LIST_CNT		64
471 #define STE_INC(x, y)		(x) = (x + 1) % y
472 #define STE_NEXT(x, y)		(x + 1) % y
473 
474 struct ste_type {
475 	u_int16_t		ste_vid;
476 	u_int16_t		ste_did;
477 	char			*ste_name;
478 };
479 
480 struct ste_list_data {
481 	struct ste_desc_onefrag	ste_rx_list[STE_RX_LIST_CNT];
482 	struct ste_desc		ste_tx_list[STE_TX_LIST_CNT];
483 	u_int8_t		ste_pad[STE_MIN_FRAMELEN];
484 };
485 
486 struct ste_chain {
487 	struct ste_desc		*ste_ptr;
488 	struct mbuf		*ste_mbuf;
489 	struct ste_chain	*ste_next;
490 	struct ste_chain	*ste_prev;
491 	u_int32_t		ste_phys;
492 };
493 
494 struct ste_chain_onefrag {
495 	struct ste_desc_onefrag	*ste_ptr;
496 	struct mbuf		*ste_mbuf;
497 	struct ste_chain_onefrag	*ste_next;
498 };
499 
500 struct ste_chain_data {
501 	struct ste_chain_onefrag ste_rx_chain[STE_RX_LIST_CNT];
502 	struct ste_chain	 ste_tx_chain[STE_TX_LIST_CNT];
503 	struct ste_chain_onefrag *ste_rx_head;
504 
505 	int			ste_tx_prod;
506 	int			ste_tx_cons;
507 	int			ste_tx_cnt;
508 };
509 
510 struct ste_softc {
511 	struct arpcom		arpcom;
512 	bus_space_tag_t		ste_btag;
513 	bus_space_handle_t	ste_bhandle;
514 	struct resource		*ste_res;
515 	struct resource		*ste_irq;
516 	void			*ste_intrhand;
517 	struct ste_type		*ste_info;
518 	device_t		ste_miibus;
519 	device_t		ste_dev;
520 	int			ste_unit;
521 	int			ste_tx_thresh;
522 	u_int8_t		ste_link;
523 	int			ste_if_flags;
524 	int			ste_tx_prev_idx;
525 	struct ste_list_data	*ste_ldata;
526 	struct ste_chain_data	ste_cdata;
527 	struct callout		ste_stat_timer;
528 	u_int8_t		ste_one_phy;
529 };
530 
531 struct ste_mii_frame {
532 	u_int8_t		mii_stdelim;
533 	u_int8_t		mii_opcode;
534 	u_int8_t		mii_phyaddr;
535 	u_int8_t		mii_regaddr;
536 	u_int8_t		mii_turnaround;
537 	u_int16_t		mii_data;
538 };
539 
540 /*
541  * MII constants
542  */
543 #define STE_MII_STARTDELIM	0x01
544 #define STE_MII_READOP		0x02
545 #define STE_MII_WRITEOP		0x01
546 #define STE_MII_TURNAROUND	0x02
547 
548 #ifdef __alpha__
549 #undef vtophys
550 #define vtophys(va)		alpha_XXX_dmamap((vm_offset_t)va)
551 #endif
552