1 /* 2 * Copyright (c) 1997, 1998 3 * Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 3. All advertising materials mentioning features or use of this software 14 * must display the following acknowledgement: 15 * This product includes software developed by Bill Paul. 16 * 4. Neither the name of the author nor the names of any co-contributors 17 * may be used to endorse or promote products derived from this software 18 * without specific prior written permission. 19 * 20 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND 21 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 22 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 23 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD 24 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 25 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 26 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 27 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 29 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 30 * THE POSSIBILITY OF SUCH DAMAGE. 31 * 32 * $FreeBSD: src/sys/pci/if_tl.c,v 1.51.2.5 2001/12/16 15:46:08 luigi Exp $ 33 * $DragonFly: src/sys/dev/netif/tl/if_tl.c,v 1.40 2008/08/17 04:32:34 sephe Exp $ 34 */ 35 36 /* 37 * Texas Instruments ThunderLAN driver for FreeBSD 2.2.6 and 3.x. 38 * Supports many Compaq PCI NICs based on the ThunderLAN ethernet controller, 39 * the National Semiconductor DP83840A physical interface and the 40 * Microchip Technology 24Cxx series serial EEPROM. 41 * 42 * Written using the following four documents: 43 * 44 * Texas Instruments ThunderLAN Programmer's Guide (www.ti.com) 45 * National Semiconductor DP83840A data sheet (www.national.com) 46 * Microchip Technology 24C02C data sheet (www.microchip.com) 47 * Micro Linear ML6692 100BaseTX only PHY data sheet (www.microlinear.com) 48 * 49 * Written by Bill Paul <wpaul@ctr.columbia.edu> 50 * Electrical Engineering Department 51 * Columbia University, New York City 52 */ 53 54 /* 55 * Some notes about the ThunderLAN: 56 * 57 * The ThunderLAN controller is a single chip containing PCI controller 58 * logic, approximately 3K of on-board SRAM, a LAN controller, and media 59 * independent interface (MII) bus. The MII allows the ThunderLAN chip to 60 * control up to 32 different physical interfaces (PHYs). The ThunderLAN 61 * also has a built-in 10baseT PHY, allowing a single ThunderLAN controller 62 * to act as a complete ethernet interface. 63 * 64 * Other PHYs may be attached to the ThunderLAN; the Compaq 10/100 cards 65 * use a National Semiconductor DP83840A PHY that supports 10 or 100Mb/sec 66 * in full or half duplex. Some of the Compaq Deskpro machines use a 67 * Level 1 LXT970 PHY with the same capabilities. Certain Olicom adapters 68 * use a Micro Linear ML6692 100BaseTX only PHY, which can be used in 69 * concert with the ThunderLAN's internal PHY to provide full 10/100 70 * support. This is cheaper than using a standalone external PHY for both 71 * 10/100 modes and letting the ThunderLAN's internal PHY go to waste. 72 * A serial EEPROM is also attached to the ThunderLAN chip to provide 73 * power-up default register settings and for storing the adapter's 74 * station address. Although not supported by this driver, the ThunderLAN 75 * chip can also be connected to token ring PHYs. 76 * 77 * The ThunderLAN has a set of registers which can be used to issue 78 * commands, acknowledge interrupts, and to manipulate other internal 79 * registers on its DIO bus. The primary registers can be accessed 80 * using either programmed I/O (inb/outb) or via PCI memory mapping, 81 * depending on how the card is configured during the PCI probing 82 * phase. It is even possible to have both PIO and memory mapped 83 * access turned on at the same time. 84 * 85 * Frame reception and transmission with the ThunderLAN chip is done 86 * using frame 'lists.' A list structure looks more or less like this: 87 * 88 * struct tl_frag { 89 * u_int32_t fragment_address; 90 * u_int32_t fragment_size; 91 * }; 92 * struct tl_list { 93 * u_int32_t forward_pointer; 94 * u_int16_t cstat; 95 * u_int16_t frame_size; 96 * struct tl_frag fragments[10]; 97 * }; 98 * 99 * The forward pointer in the list header can be either a 0 or the address 100 * of another list, which allows several lists to be linked together. Each 101 * list contains up to 10 fragment descriptors. This means the chip allows 102 * ethernet frames to be broken up into up to 10 chunks for transfer to 103 * and from the SRAM. Note that the forward pointer and fragment buffer 104 * addresses are physical memory addresses, not virtual. Note also that 105 * a single ethernet frame can not span lists: if the host wants to 106 * transmit a frame and the frame data is split up over more than 10 107 * buffers, the frame has to collapsed before it can be transmitted. 108 * 109 * To receive frames, the driver sets up a number of lists and populates 110 * the fragment descriptors, then it sends an RX GO command to the chip. 111 * When a frame is received, the chip will DMA it into the memory regions 112 * specified by the fragment descriptors and then trigger an RX 'end of 113 * frame interrupt' when done. The driver may choose to use only one 114 * fragment per list; this may result is slighltly less efficient use 115 * of memory in exchange for improving performance. 116 * 117 * To transmit frames, the driver again sets up lists and fragment 118 * descriptors, only this time the buffers contain frame data that 119 * is to be DMA'ed into the chip instead of out of it. Once the chip 120 * has transfered the data into its on-board SRAM, it will trigger a 121 * TX 'end of frame' interrupt. It will also generate an 'end of channel' 122 * interrupt when it reaches the end of the list. 123 */ 124 125 /* 126 * Some notes about this driver: 127 * 128 * The ThunderLAN chip provides a couple of different ways to organize 129 * reception, transmission and interrupt handling. The simplest approach 130 * is to use one list each for transmission and reception. In this mode, 131 * the ThunderLAN will generate two interrupts for every received frame 132 * (one RX EOF and one RX EOC) and two for each transmitted frame (one 133 * TX EOF and one TX EOC). This may make the driver simpler but it hurts 134 * performance to have to handle so many interrupts. 135 * 136 * Initially I wanted to create a circular list of receive buffers so 137 * that the ThunderLAN chip would think there was an infinitely long 138 * receive channel and never deliver an RXEOC interrupt. However this 139 * doesn't work correctly under heavy load: while the manual says the 140 * chip will trigger an RXEOF interrupt each time a frame is copied into 141 * memory, you can't count on the chip waiting around for you to acknowledge 142 * the interrupt before it starts trying to DMA the next frame. The result 143 * is that the chip might traverse the entire circular list and then wrap 144 * around before you have a chance to do anything about it. Consequently, 145 * the receive list is terminated (with a 0 in the forward pointer in the 146 * last element). Each time an RXEOF interrupt arrives, the used list 147 * is shifted to the end of the list. This gives the appearance of an 148 * infinitely large RX chain so long as the driver doesn't fall behind 149 * the chip and allow all of the lists to be filled up. 150 * 151 * If all the lists are filled, the adapter will deliver an RX 'end of 152 * channel' interrupt when it hits the 0 forward pointer at the end of 153 * the chain. The RXEOC handler then cleans out the RX chain and resets 154 * the list head pointer in the ch_parm register and restarts the receiver. 155 * 156 * For frame transmission, it is possible to program the ThunderLAN's 157 * transmit interrupt threshold so that the chip can acknowledge multiple 158 * lists with only a single TX EOF interrupt. This allows the driver to 159 * queue several frames in one shot, and only have to handle a total 160 * two interrupts (one TX EOF and one TX EOC) no matter how many frames 161 * are transmitted. Frame transmission is done directly out of the 162 * mbufs passed to the tl_start() routine via the interface send queue. 163 * The driver simply sets up the fragment descriptors in the transmit 164 * lists to point to the mbuf data regions and sends a TX GO command. 165 * 166 * Note that since the RX and TX lists themselves are always used 167 * only by the driver, the are malloc()ed once at driver initialization 168 * time and never free()ed. 169 * 170 * Also, in order to remain as platform independent as possible, this 171 * driver uses memory mapped register access to manipulate the card 172 * as opposed to programmed I/O. This avoids the use of the inb/outb 173 * (and related) instructions which are specific to the i386 platform. 174 * 175 * Using these techniques, this driver achieves very high performance 176 * by minimizing the amount of interrupts generated during large 177 * transfers and by completely avoiding buffer copies. Frame transfer 178 * to and from the ThunderLAN chip is performed entirely by the chip 179 * itself thereby reducing the load on the host CPU. 180 */ 181 182 #include <sys/param.h> 183 #include <sys/systm.h> 184 #include <sys/sockio.h> 185 #include <sys/mbuf.h> 186 #include <sys/malloc.h> 187 #include <sys/kernel.h> 188 #include <sys/socket.h> 189 #include <sys/serialize.h> 190 #include <sys/bus.h> 191 #include <sys/rman.h> 192 #include <sys/thread2.h> 193 #include <sys/interrupt.h> 194 195 #include <net/if.h> 196 #include <net/ifq_var.h> 197 #include <net/if_arp.h> 198 #include <net/ethernet.h> 199 #include <net/if_dl.h> 200 #include <net/if_media.h> 201 202 #include <net/bpf.h> 203 204 #include <vm/vm.h> /* for vtophys */ 205 #include <vm/pmap.h> /* for vtophys */ 206 207 #include "../mii_layer/mii.h" 208 #include "../mii_layer/miivar.h" 209 210 #include <bus/pci/pcireg.h> 211 #include <bus/pci/pcivar.h> 212 213 /* 214 * Default to using PIO register access mode to pacify certain 215 * laptop docking stations with built-in ThunderLAN chips that 216 * don't seem to handle memory mapped mode properly. 217 */ 218 #define TL_USEIOSPACE 219 220 #include "if_tlreg.h" 221 222 /* "controller miibus0" required. See GENERIC if you get errors here. */ 223 #include "miibus_if.h" 224 225 /* 226 * Various supported device vendors/types and their names. 227 */ 228 229 static struct tl_type tl_devs[] = { 230 { TI_VENDORID, TI_DEVICEID_THUNDERLAN, 231 "Texas Instruments ThunderLAN" }, 232 { COMPAQ_VENDORID, COMPAQ_DEVICEID_NETEL_10, 233 "Compaq Netelligent 10" }, 234 { COMPAQ_VENDORID, COMPAQ_DEVICEID_NETEL_10_100, 235 "Compaq Netelligent 10/100" }, 236 { COMPAQ_VENDORID, COMPAQ_DEVICEID_NETEL_10_100_PROLIANT, 237 "Compaq Netelligent 10/100 Proliant" }, 238 { COMPAQ_VENDORID, COMPAQ_DEVICEID_NETEL_10_100_DUAL, 239 "Compaq Netelligent 10/100 Dual Port" }, 240 { COMPAQ_VENDORID, COMPAQ_DEVICEID_NETFLEX_3P_INTEGRATED, 241 "Compaq NetFlex-3/P Integrated" }, 242 { COMPAQ_VENDORID, COMPAQ_DEVICEID_NETFLEX_3P, 243 "Compaq NetFlex-3/P" }, 244 { COMPAQ_VENDORID, COMPAQ_DEVICEID_NETFLEX_3P_BNC, 245 "Compaq NetFlex 3/P w/ BNC" }, 246 { COMPAQ_VENDORID, COMPAQ_DEVICEID_NETEL_10_100_EMBEDDED, 247 "Compaq Netelligent 10/100 TX Embedded UTP" }, 248 { COMPAQ_VENDORID, COMPAQ_DEVICEID_NETEL_10_T2_UTP_COAX, 249 "Compaq Netelligent 10 T/2 PCI UTP/Coax" }, 250 { COMPAQ_VENDORID, COMPAQ_DEVICEID_NETEL_10_100_TX_UTP, 251 "Compaq Netelligent 10/100 TX UTP" }, 252 { OLICOM_VENDORID, OLICOM_DEVICEID_OC2183, 253 "Olicom OC-2183/2185" }, 254 { OLICOM_VENDORID, OLICOM_DEVICEID_OC2325, 255 "Olicom OC-2325" }, 256 { OLICOM_VENDORID, OLICOM_DEVICEID_OC2326, 257 "Olicom OC-2326 10/100 TX UTP" }, 258 { 0, 0, NULL } 259 }; 260 261 static int tl_probe (device_t); 262 static int tl_attach (device_t); 263 static int tl_detach (device_t); 264 static int tl_intvec_rxeoc (void *, u_int32_t); 265 static int tl_intvec_txeoc (void *, u_int32_t); 266 static int tl_intvec_txeof (void *, u_int32_t); 267 static int tl_intvec_rxeof (void *, u_int32_t); 268 static int tl_intvec_adchk (void *, u_int32_t); 269 static int tl_intvec_netsts (void *, u_int32_t); 270 271 static int tl_newbuf (struct tl_softc *, 272 struct tl_chain_onefrag *); 273 static void tl_stats_update (void *); 274 static void tl_stats_update_serialized(void *); 275 static int tl_encap (struct tl_softc *, struct tl_chain *, 276 struct mbuf *); 277 278 static void tl_intr (void *); 279 static void tl_start (struct ifnet *); 280 static int tl_ioctl (struct ifnet *, u_long, caddr_t, 281 struct ucred *); 282 static void tl_init (void *); 283 static void tl_stop (struct tl_softc *); 284 static void tl_watchdog (struct ifnet *); 285 static void tl_shutdown (device_t); 286 static int tl_ifmedia_upd (struct ifnet *); 287 static void tl_ifmedia_sts (struct ifnet *, struct ifmediareq *); 288 289 static u_int8_t tl_eeprom_putbyte (struct tl_softc *, int); 290 static u_int8_t tl_eeprom_getbyte (struct tl_softc *, 291 int, u_int8_t *); 292 static int tl_read_eeprom (struct tl_softc *, caddr_t, int, int); 293 294 static void tl_mii_sync (struct tl_softc *); 295 static void tl_mii_send (struct tl_softc *, u_int32_t, int); 296 static int tl_mii_readreg (struct tl_softc *, struct tl_mii_frame *); 297 static int tl_mii_writereg (struct tl_softc *, struct tl_mii_frame *); 298 static int tl_miibus_readreg (device_t, int, int); 299 static int tl_miibus_writereg (device_t, int, int, int); 300 static void tl_miibus_statchg (device_t); 301 302 static void tl_setmode (struct tl_softc *, int); 303 static int tl_calchash (caddr_t); 304 static void tl_setmulti (struct tl_softc *); 305 static void tl_setfilt (struct tl_softc *, caddr_t, int); 306 static void tl_softreset (struct tl_softc *, int); 307 static void tl_hardreset (device_t); 308 static int tl_list_rx_init (struct tl_softc *); 309 static int tl_list_tx_init (struct tl_softc *); 310 311 static u_int8_t tl_dio_read8 (struct tl_softc *, int); 312 static u_int16_t tl_dio_read16 (struct tl_softc *, int); 313 static u_int32_t tl_dio_read32 (struct tl_softc *, int); 314 static void tl_dio_write8 (struct tl_softc *, int, int); 315 static void tl_dio_write16 (struct tl_softc *, int, int); 316 static void tl_dio_write32 (struct tl_softc *, int, int); 317 static void tl_dio_setbit (struct tl_softc *, int, int); 318 static void tl_dio_clrbit (struct tl_softc *, int, int); 319 static void tl_dio_setbit16 (struct tl_softc *, int, int); 320 static void tl_dio_clrbit16 (struct tl_softc *, int, int); 321 322 #ifdef TL_USEIOSPACE 323 #define TL_RES SYS_RES_IOPORT 324 #define TL_RID TL_PCI_LOIO 325 #else 326 #define TL_RES SYS_RES_MEMORY 327 #define TL_RID TL_PCI_LOMEM 328 #endif 329 330 static device_method_t tl_methods[] = { 331 /* Device interface */ 332 DEVMETHOD(device_probe, tl_probe), 333 DEVMETHOD(device_attach, tl_attach), 334 DEVMETHOD(device_detach, tl_detach), 335 DEVMETHOD(device_shutdown, tl_shutdown), 336 337 /* bus interface */ 338 DEVMETHOD(bus_print_child, bus_generic_print_child), 339 DEVMETHOD(bus_driver_added, bus_generic_driver_added), 340 341 /* MII interface */ 342 DEVMETHOD(miibus_readreg, tl_miibus_readreg), 343 DEVMETHOD(miibus_writereg, tl_miibus_writereg), 344 DEVMETHOD(miibus_statchg, tl_miibus_statchg), 345 346 { 0, 0 } 347 }; 348 349 static driver_t tl_driver = { 350 "tl", 351 tl_methods, 352 sizeof(struct tl_softc) 353 }; 354 355 static devclass_t tl_devclass; 356 357 DECLARE_DUMMY_MODULE(if_tl); 358 DRIVER_MODULE(if_tl, pci, tl_driver, tl_devclass, 0, 0); 359 DRIVER_MODULE(miibus, tl, miibus_driver, miibus_devclass, 0, 0); 360 361 static u_int8_t 362 tl_dio_read8(struct tl_softc *sc, int reg) 363 { 364 CSR_WRITE_2(sc, TL_DIO_ADDR, reg); 365 return(CSR_READ_1(sc, TL_DIO_DATA + (reg & 3))); 366 } 367 368 static u_int16_t 369 tl_dio_read16(struct tl_softc *sc, int reg) 370 { 371 CSR_WRITE_2(sc, TL_DIO_ADDR, reg); 372 return(CSR_READ_2(sc, TL_DIO_DATA + (reg & 3))); 373 } 374 375 static u_int32_t 376 tl_dio_read32(struct tl_softc *sc, int reg) 377 { 378 CSR_WRITE_2(sc, TL_DIO_ADDR, reg); 379 return(CSR_READ_4(sc, TL_DIO_DATA + (reg & 3))); 380 } 381 382 static void 383 tl_dio_write8(struct tl_softc *sc, int reg, int val) 384 { 385 CSR_WRITE_2(sc, TL_DIO_ADDR, reg); 386 CSR_WRITE_1(sc, TL_DIO_DATA + (reg & 3), val); 387 return; 388 } 389 390 static void 391 tl_dio_write16(struct tl_softc *sc, int reg, int val) 392 { 393 CSR_WRITE_2(sc, TL_DIO_ADDR, reg); 394 CSR_WRITE_2(sc, TL_DIO_DATA + (reg & 3), val); 395 return; 396 } 397 398 static void 399 tl_dio_write32(struct tl_softc *sc, int reg, int val) 400 { 401 CSR_WRITE_2(sc, TL_DIO_ADDR, reg); 402 CSR_WRITE_4(sc, TL_DIO_DATA + (reg & 3), val); 403 return; 404 } 405 406 static void 407 tl_dio_setbit(struct tl_softc *sc, int reg, int bit) 408 { 409 u_int8_t f; 410 411 CSR_WRITE_2(sc, TL_DIO_ADDR, reg); 412 f = CSR_READ_1(sc, TL_DIO_DATA + (reg & 3)); 413 f |= bit; 414 CSR_WRITE_1(sc, TL_DIO_DATA + (reg & 3), f); 415 416 return; 417 } 418 419 static void 420 tl_dio_clrbit(struct tl_softc *sc, int reg, int bit) 421 { 422 u_int8_t f; 423 424 CSR_WRITE_2(sc, TL_DIO_ADDR, reg); 425 f = CSR_READ_1(sc, TL_DIO_DATA + (reg & 3)); 426 f &= ~bit; 427 CSR_WRITE_1(sc, TL_DIO_DATA + (reg & 3), f); 428 429 return; 430 } 431 432 static void 433 tl_dio_setbit16(struct tl_softc *sc, int reg, int bit) 434 { 435 u_int16_t f; 436 437 CSR_WRITE_2(sc, TL_DIO_ADDR, reg); 438 f = CSR_READ_2(sc, TL_DIO_DATA + (reg & 3)); 439 f |= bit; 440 CSR_WRITE_2(sc, TL_DIO_DATA + (reg & 3), f); 441 442 return; 443 } 444 445 static void 446 tl_dio_clrbit16(struct tl_softc *sc, int reg, int bit) 447 { 448 u_int16_t f; 449 450 CSR_WRITE_2(sc, TL_DIO_ADDR, reg); 451 f = CSR_READ_2(sc, TL_DIO_DATA + (reg & 3)); 452 f &= ~bit; 453 CSR_WRITE_2(sc, TL_DIO_DATA + (reg & 3), f); 454 455 return; 456 } 457 458 /* 459 * Send an instruction or address to the EEPROM, check for ACK. 460 */ 461 static u_int8_t 462 tl_eeprom_putbyte(struct tl_softc *sc, int byte) 463 { 464 int i, ack = 0; 465 466 /* 467 * Make sure we're in TX mode. 468 */ 469 tl_dio_setbit(sc, TL_NETSIO, TL_SIO_ETXEN); 470 471 /* 472 * Feed in each bit and stobe the clock. 473 */ 474 for (i = 0x80; i; i >>= 1) { 475 if (byte & i) { 476 tl_dio_setbit(sc, TL_NETSIO, TL_SIO_EDATA); 477 } else { 478 tl_dio_clrbit(sc, TL_NETSIO, TL_SIO_EDATA); 479 } 480 DELAY(1); 481 tl_dio_setbit(sc, TL_NETSIO, TL_SIO_ECLOK); 482 DELAY(1); 483 tl_dio_clrbit(sc, TL_NETSIO, TL_SIO_ECLOK); 484 } 485 486 /* 487 * Turn off TX mode. 488 */ 489 tl_dio_clrbit(sc, TL_NETSIO, TL_SIO_ETXEN); 490 491 /* 492 * Check for ack. 493 */ 494 tl_dio_setbit(sc, TL_NETSIO, TL_SIO_ECLOK); 495 ack = tl_dio_read8(sc, TL_NETSIO) & TL_SIO_EDATA; 496 tl_dio_clrbit(sc, TL_NETSIO, TL_SIO_ECLOK); 497 498 return(ack); 499 } 500 501 /* 502 * Read a byte of data stored in the EEPROM at address 'addr.' 503 */ 504 static u_int8_t 505 tl_eeprom_getbyte(struct tl_softc *sc, int addr, u_int8_t *dest) 506 { 507 int i; 508 u_int8_t byte = 0; 509 510 tl_dio_write8(sc, TL_NETSIO, 0); 511 512 EEPROM_START; 513 514 /* 515 * Send write control code to EEPROM. 516 */ 517 if (tl_eeprom_putbyte(sc, EEPROM_CTL_WRITE)) { 518 if_printf(&sc->arpcom.ac_if, "failed to send write command, " 519 "status: %x\n", tl_dio_read8(sc, TL_NETSIO)); 520 return(1); 521 } 522 523 /* 524 * Send address of byte we want to read. 525 */ 526 if (tl_eeprom_putbyte(sc, addr)) { 527 if_printf(&sc->arpcom.ac_if, "failed to send address, " 528 "status: %x\n", tl_dio_read8(sc, TL_NETSIO)); 529 return(1); 530 } 531 532 EEPROM_STOP; 533 EEPROM_START; 534 /* 535 * Send read control code to EEPROM. 536 */ 537 if (tl_eeprom_putbyte(sc, EEPROM_CTL_READ)) { 538 if_printf(&sc->arpcom.ac_if, "failed to send write command, " 539 "status: %x\n", tl_dio_read8(sc, TL_NETSIO)); 540 return(1); 541 } 542 543 /* 544 * Start reading bits from EEPROM. 545 */ 546 tl_dio_clrbit(sc, TL_NETSIO, TL_SIO_ETXEN); 547 for (i = 0x80; i; i >>= 1) { 548 tl_dio_setbit(sc, TL_NETSIO, TL_SIO_ECLOK); 549 DELAY(1); 550 if (tl_dio_read8(sc, TL_NETSIO) & TL_SIO_EDATA) 551 byte |= i; 552 tl_dio_clrbit(sc, TL_NETSIO, TL_SIO_ECLOK); 553 DELAY(1); 554 } 555 556 EEPROM_STOP; 557 558 /* 559 * No ACK generated for read, so just return byte. 560 */ 561 562 *dest = byte; 563 564 return(0); 565 } 566 567 /* 568 * Read a sequence of bytes from the EEPROM. 569 */ 570 static int 571 tl_read_eeprom(struct tl_softc *sc, caddr_t dest, int off, int cnt) 572 { 573 int err = 0, i; 574 u_int8_t byte = 0; 575 576 for (i = 0; i < cnt; i++) { 577 err = tl_eeprom_getbyte(sc, off + i, &byte); 578 if (err) 579 break; 580 *(dest + i) = byte; 581 } 582 583 return(err ? 1 : 0); 584 } 585 586 static void 587 tl_mii_sync(struct tl_softc *sc) 588 { 589 int i; 590 591 tl_dio_clrbit(sc, TL_NETSIO, TL_SIO_MTXEN); 592 593 for (i = 0; i < 32; i++) { 594 tl_dio_setbit(sc, TL_NETSIO, TL_SIO_MCLK); 595 tl_dio_clrbit(sc, TL_NETSIO, TL_SIO_MCLK); 596 } 597 598 return; 599 } 600 601 static void 602 tl_mii_send(struct tl_softc *sc, u_int32_t bits, int cnt) 603 { 604 int i; 605 606 for (i = (0x1 << (cnt - 1)); i; i >>= 1) { 607 tl_dio_clrbit(sc, TL_NETSIO, TL_SIO_MCLK); 608 if (bits & i) { 609 tl_dio_setbit(sc, TL_NETSIO, TL_SIO_MDATA); 610 } else { 611 tl_dio_clrbit(sc, TL_NETSIO, TL_SIO_MDATA); 612 } 613 tl_dio_setbit(sc, TL_NETSIO, TL_SIO_MCLK); 614 } 615 } 616 617 static int 618 tl_mii_readreg(struct tl_softc *sc, struct tl_mii_frame *frame) 619 { 620 int i, ack; 621 int minten = 0; 622 623 tl_mii_sync(sc); 624 625 /* 626 * Set up frame for RX. 627 */ 628 frame->mii_stdelim = TL_MII_STARTDELIM; 629 frame->mii_opcode = TL_MII_READOP; 630 frame->mii_turnaround = 0; 631 frame->mii_data = 0; 632 633 /* 634 * Turn off MII interrupt by forcing MINTEN low. 635 */ 636 minten = tl_dio_read8(sc, TL_NETSIO) & TL_SIO_MINTEN; 637 if (minten) { 638 tl_dio_clrbit(sc, TL_NETSIO, TL_SIO_MINTEN); 639 } 640 641 /* 642 * Turn on data xmit. 643 */ 644 tl_dio_setbit(sc, TL_NETSIO, TL_SIO_MTXEN); 645 646 /* 647 * Send command/address info. 648 */ 649 tl_mii_send(sc, frame->mii_stdelim, 2); 650 tl_mii_send(sc, frame->mii_opcode, 2); 651 tl_mii_send(sc, frame->mii_phyaddr, 5); 652 tl_mii_send(sc, frame->mii_regaddr, 5); 653 654 /* 655 * Turn off xmit. 656 */ 657 tl_dio_clrbit(sc, TL_NETSIO, TL_SIO_MTXEN); 658 659 /* Idle bit */ 660 tl_dio_clrbit(sc, TL_NETSIO, TL_SIO_MCLK); 661 tl_dio_setbit(sc, TL_NETSIO, TL_SIO_MCLK); 662 663 /* Check for ack */ 664 tl_dio_clrbit(sc, TL_NETSIO, TL_SIO_MCLK); 665 ack = tl_dio_read8(sc, TL_NETSIO) & TL_SIO_MDATA; 666 667 /* Complete the cycle */ 668 tl_dio_setbit(sc, TL_NETSIO, TL_SIO_MCLK); 669 670 /* 671 * Now try reading data bits. If the ack failed, we still 672 * need to clock through 16 cycles to keep the PHYs in sync. 673 */ 674 if (ack) { 675 for(i = 0; i < 16; i++) { 676 tl_dio_clrbit(sc, TL_NETSIO, TL_SIO_MCLK); 677 tl_dio_setbit(sc, TL_NETSIO, TL_SIO_MCLK); 678 } 679 goto fail; 680 } 681 682 for (i = 0x8000; i; i >>= 1) { 683 tl_dio_clrbit(sc, TL_NETSIO, TL_SIO_MCLK); 684 if (!ack) { 685 if (tl_dio_read8(sc, TL_NETSIO) & TL_SIO_MDATA) 686 frame->mii_data |= i; 687 } 688 tl_dio_setbit(sc, TL_NETSIO, TL_SIO_MCLK); 689 } 690 691 fail: 692 693 tl_dio_setbit(sc, TL_NETSIO, TL_SIO_MCLK); 694 tl_dio_clrbit(sc, TL_NETSIO, TL_SIO_MCLK); 695 696 /* Reenable interrupts */ 697 if (minten) { 698 tl_dio_setbit(sc, TL_NETSIO, TL_SIO_MINTEN); 699 } 700 701 if (ack) 702 return(1); 703 return(0); 704 } 705 706 static int 707 tl_mii_writereg(struct tl_softc *sc, struct tl_mii_frame *frame) 708 { 709 int minten; 710 711 tl_mii_sync(sc); 712 713 /* 714 * Set up frame for TX. 715 */ 716 717 frame->mii_stdelim = TL_MII_STARTDELIM; 718 frame->mii_opcode = TL_MII_WRITEOP; 719 frame->mii_turnaround = TL_MII_TURNAROUND; 720 721 /* 722 * Turn off MII interrupt by forcing MINTEN low. 723 */ 724 minten = tl_dio_read8(sc, TL_NETSIO) & TL_SIO_MINTEN; 725 if (minten) { 726 tl_dio_clrbit(sc, TL_NETSIO, TL_SIO_MINTEN); 727 } 728 729 /* 730 * Turn on data output. 731 */ 732 tl_dio_setbit(sc, TL_NETSIO, TL_SIO_MTXEN); 733 734 tl_mii_send(sc, frame->mii_stdelim, 2); 735 tl_mii_send(sc, frame->mii_opcode, 2); 736 tl_mii_send(sc, frame->mii_phyaddr, 5); 737 tl_mii_send(sc, frame->mii_regaddr, 5); 738 tl_mii_send(sc, frame->mii_turnaround, 2); 739 tl_mii_send(sc, frame->mii_data, 16); 740 741 tl_dio_setbit(sc, TL_NETSIO, TL_SIO_MCLK); 742 tl_dio_clrbit(sc, TL_NETSIO, TL_SIO_MCLK); 743 744 /* 745 * Turn off xmit. 746 */ 747 tl_dio_clrbit(sc, TL_NETSIO, TL_SIO_MTXEN); 748 749 /* Reenable interrupts */ 750 if (minten) 751 tl_dio_setbit(sc, TL_NETSIO, TL_SIO_MINTEN); 752 753 return(0); 754 } 755 756 static int 757 tl_miibus_readreg(device_t dev, int phy, int reg) 758 { 759 struct tl_softc *sc; 760 struct tl_mii_frame frame; 761 762 sc = device_get_softc(dev); 763 bzero((char *)&frame, sizeof(frame)); 764 765 frame.mii_phyaddr = phy; 766 frame.mii_regaddr = reg; 767 tl_mii_readreg(sc, &frame); 768 769 return(frame.mii_data); 770 } 771 772 static int 773 tl_miibus_writereg(device_t dev, int phy, int reg, int data) 774 { 775 struct tl_softc *sc; 776 struct tl_mii_frame frame; 777 778 sc = device_get_softc(dev); 779 bzero((char *)&frame, sizeof(frame)); 780 781 frame.mii_phyaddr = phy; 782 frame.mii_regaddr = reg; 783 frame.mii_data = data; 784 785 tl_mii_writereg(sc, &frame); 786 787 return(0); 788 } 789 790 static void 791 tl_miibus_statchg(device_t dev) 792 { 793 struct tl_softc *sc; 794 struct mii_data *mii; 795 796 sc = device_get_softc(dev); 797 mii = device_get_softc(sc->tl_miibus); 798 799 if ((mii->mii_media_active & IFM_GMASK) == IFM_FDX) { 800 tl_dio_setbit(sc, TL_NETCMD, TL_CMD_DUPLEX); 801 } else { 802 tl_dio_clrbit(sc, TL_NETCMD, TL_CMD_DUPLEX); 803 } 804 805 return; 806 } 807 808 /* 809 * Set modes for bitrate devices. 810 */ 811 static void 812 tl_setmode(struct tl_softc *sc, int media) 813 { 814 if (IFM_SUBTYPE(media) == IFM_10_5) 815 tl_dio_setbit(sc, TL_ACOMMIT, TL_AC_MTXD1); 816 if (IFM_SUBTYPE(media) == IFM_10_T) { 817 tl_dio_clrbit(sc, TL_ACOMMIT, TL_AC_MTXD1); 818 if ((media & IFM_GMASK) == IFM_FDX) { 819 tl_dio_clrbit(sc, TL_ACOMMIT, TL_AC_MTXD3); 820 tl_dio_setbit(sc, TL_NETCMD, TL_CMD_DUPLEX); 821 } else { 822 tl_dio_setbit(sc, TL_ACOMMIT, TL_AC_MTXD3); 823 tl_dio_clrbit(sc, TL_NETCMD, TL_CMD_DUPLEX); 824 } 825 } 826 827 return; 828 } 829 830 /* 831 * Calculate the hash of a MAC address for programming the multicast hash 832 * table. This hash is simply the address split into 6-bit chunks 833 * XOR'd, e.g. 834 * byte: 000000|00 1111|1111 22|222222|333333|33 4444|4444 55|555555 835 * bit: 765432|10 7654|3210 76|543210|765432|10 7654|3210 76|543210 836 * Bytes 0-2 and 3-5 are symmetrical, so are folded together. Then 837 * the folded 24-bit value is split into 6-bit portions and XOR'd. 838 */ 839 static int 840 tl_calchash(caddr_t addr) 841 { 842 int t; 843 844 t = (addr[0] ^ addr[3]) << 16 | (addr[1] ^ addr[4]) << 8 | 845 (addr[2] ^ addr[5]); 846 return ((t >> 18) ^ (t >> 12) ^ (t >> 6) ^ t) & 0x3f; 847 } 848 849 /* 850 * The ThunderLAN has a perfect MAC address filter in addition to 851 * the multicast hash filter. The perfect filter can be programmed 852 * with up to four MAC addresses. The first one is always used to 853 * hold the station address, which leaves us free to use the other 854 * three for multicast addresses. 855 */ 856 static void 857 tl_setfilt(struct tl_softc *sc, caddr_t addr, int slot) 858 { 859 int i; 860 u_int16_t regaddr; 861 862 regaddr = TL_AREG0_B5 + (slot * ETHER_ADDR_LEN); 863 864 for (i = 0; i < ETHER_ADDR_LEN; i++) 865 tl_dio_write8(sc, regaddr + i, *(addr + i)); 866 867 return; 868 } 869 870 /* 871 * XXX In FreeBSD 3.0, multicast addresses are managed using a doubly 872 * linked list. This is fine, except addresses are added from the head 873 * end of the list. We want to arrange for 224.0.0.1 (the "all hosts") 874 * group to always be in the perfect filter, but as more groups are added, 875 * the 224.0.0.1 entry (which is always added first) gets pushed down 876 * the list and ends up at the tail. So after 3 or 4 multicast groups 877 * are added, the all-hosts entry gets pushed out of the perfect filter 878 * and into the hash table. 879 * 880 * Because the multicast list is a doubly-linked list as opposed to a 881 * circular queue, we don't have the ability to just grab the tail of 882 * the list and traverse it backwards. Instead, we have to traverse 883 * the list once to find the tail, then traverse it again backwards to 884 * update the multicast filter. 885 */ 886 static void 887 tl_setmulti(struct tl_softc *sc) 888 { 889 struct ifnet *ifp; 890 u_int32_t hashes[2] = { 0, 0 }; 891 int h, i; 892 struct ifmultiaddr *ifma; 893 u_int8_t dummy[] = { 0, 0, 0, 0, 0 ,0 }; 894 ifp = &sc->arpcom.ac_if; 895 896 /* First, zot all the existing filters. */ 897 for (i = 1; i < 4; i++) 898 tl_setfilt(sc, (caddr_t)&dummy, i); 899 tl_dio_write32(sc, TL_HASH1, 0); 900 tl_dio_write32(sc, TL_HASH2, 0); 901 902 /* Now program new ones. */ 903 if (ifp->if_flags & IFF_ALLMULTI) { 904 hashes[0] = 0xFFFFFFFF; 905 hashes[1] = 0xFFFFFFFF; 906 } else { 907 i = 1; 908 /* First find the tail of the list. */ 909 for (ifma = ifp->if_multiaddrs.lh_first; ifma != NULL; 910 ifma = ifma->ifma_link.le_next) { 911 if (ifma->ifma_link.le_next == NULL) 912 break; 913 } 914 /* Now traverse the list backwards. */ 915 for (; ifma != NULL && ifma != (void *)&ifp->if_multiaddrs; 916 ifma = (struct ifmultiaddr *)ifma->ifma_link.le_prev) { 917 if (ifma->ifma_addr->sa_family != AF_LINK) 918 continue; 919 /* 920 * Program the first three multicast groups 921 * into the perfect filter. For all others, 922 * use the hash table. 923 */ 924 if (i < 4) { 925 tl_setfilt(sc, 926 LLADDR((struct sockaddr_dl *)ifma->ifma_addr), i); 927 i++; 928 continue; 929 } 930 931 h = tl_calchash( 932 LLADDR((struct sockaddr_dl *)ifma->ifma_addr)); 933 if (h < 32) 934 hashes[0] |= (1 << h); 935 else 936 hashes[1] |= (1 << (h - 32)); 937 } 938 } 939 940 tl_dio_write32(sc, TL_HASH1, hashes[0]); 941 tl_dio_write32(sc, TL_HASH2, hashes[1]); 942 943 return; 944 } 945 946 /* 947 * This routine is recommended by the ThunderLAN manual to insure that 948 * the internal PHY is powered up correctly. It also recommends a one 949 * second pause at the end to 'wait for the clocks to start' but in my 950 * experience this isn't necessary. 951 */ 952 static void 953 tl_hardreset(device_t dev) 954 { 955 struct tl_softc *sc; 956 int i; 957 u_int16_t flags; 958 959 sc = device_get_softc(dev); 960 961 tl_mii_sync(sc); 962 963 flags = BMCR_LOOP|BMCR_ISO|BMCR_PDOWN; 964 965 for (i = 0; i < MII_NPHY; i++) 966 tl_miibus_writereg(dev, i, MII_BMCR, flags); 967 968 tl_miibus_writereg(dev, 31, MII_BMCR, BMCR_ISO); 969 DELAY(50000); 970 tl_miibus_writereg(dev, 31, MII_BMCR, BMCR_LOOP|BMCR_ISO); 971 tl_mii_sync(sc); 972 while(tl_miibus_readreg(dev, 31, MII_BMCR) & BMCR_RESET); 973 974 DELAY(50000); 975 return; 976 } 977 978 static void 979 tl_softreset(struct tl_softc *sc, int internal) 980 { 981 u_int32_t cmd, dummy, i; 982 983 /* Assert the adapter reset bit. */ 984 CMD_SET(sc, TL_CMD_ADRST); 985 986 /* Turn off interrupts */ 987 CMD_SET(sc, TL_CMD_INTSOFF); 988 989 /* First, clear the stats registers. */ 990 for (i = 0; i < 5; i++) 991 dummy = tl_dio_read32(sc, TL_TXGOODFRAMES); 992 993 /* Clear Areg and Hash registers */ 994 for (i = 0; i < 8; i++) 995 tl_dio_write32(sc, TL_AREG0_B5, 0x00000000); 996 997 /* 998 * Set up Netconfig register. Enable one channel and 999 * one fragment mode. 1000 */ 1001 tl_dio_setbit16(sc, TL_NETCONFIG, TL_CFG_ONECHAN|TL_CFG_ONEFRAG); 1002 if (internal && !sc->tl_bitrate) { 1003 tl_dio_setbit16(sc, TL_NETCONFIG, TL_CFG_PHYEN); 1004 } else { 1005 tl_dio_clrbit16(sc, TL_NETCONFIG, TL_CFG_PHYEN); 1006 } 1007 1008 /* Handle cards with bitrate devices. */ 1009 if (sc->tl_bitrate) 1010 tl_dio_setbit16(sc, TL_NETCONFIG, TL_CFG_BITRATE); 1011 1012 /* 1013 * Load adapter irq pacing timer and tx threshold. 1014 * We make the transmit threshold 1 initially but we may 1015 * change that later. 1016 */ 1017 cmd = CSR_READ_4(sc, TL_HOSTCMD); 1018 cmd |= TL_CMD_NES; 1019 cmd &= ~(TL_CMD_RT|TL_CMD_EOC|TL_CMD_ACK_MASK|TL_CMD_CHSEL_MASK); 1020 CMD_PUT(sc, cmd | (TL_CMD_LDTHR | TX_THR)); 1021 CMD_PUT(sc, cmd | (TL_CMD_LDTMR | 0x00000003)); 1022 1023 /* Unreset the MII */ 1024 tl_dio_setbit(sc, TL_NETSIO, TL_SIO_NMRST); 1025 1026 /* Take the adapter out of reset */ 1027 tl_dio_setbit(sc, TL_NETCMD, TL_CMD_NRESET|TL_CMD_NWRAP); 1028 1029 /* Wait for things to settle down a little. */ 1030 DELAY(500); 1031 1032 return; 1033 } 1034 1035 /* 1036 * Probe for a ThunderLAN chip. Check the PCI vendor and device IDs 1037 * against our list and return its name if we find a match. 1038 */ 1039 static int 1040 tl_probe(device_t dev) 1041 { 1042 struct tl_type *t; 1043 1044 t = tl_devs; 1045 1046 while(t->tl_name != NULL) { 1047 if ((pci_get_vendor(dev) == t->tl_vid) && 1048 (pci_get_device(dev) == t->tl_did)) { 1049 device_set_desc(dev, t->tl_name); 1050 return(0); 1051 } 1052 t++; 1053 } 1054 1055 return(ENXIO); 1056 } 1057 1058 static int 1059 tl_attach(device_t dev) 1060 { 1061 int i; 1062 u_int16_t did, vid; 1063 struct tl_type *t; 1064 struct ifnet *ifp; 1065 struct tl_softc *sc; 1066 int error = 0, rid; 1067 uint8_t eaddr[ETHER_ADDR_LEN]; 1068 1069 vid = pci_get_vendor(dev); 1070 did = pci_get_device(dev); 1071 sc = device_get_softc(dev); 1072 1073 t = tl_devs; 1074 while(t->tl_name != NULL) { 1075 if (vid == t->tl_vid && did == t->tl_did) 1076 break; 1077 t++; 1078 } 1079 1080 KKASSERT(t->tl_name != NULL); 1081 1082 pci_enable_busmaster(dev); 1083 1084 #ifdef TL_USEIOSPACE 1085 rid = TL_PCI_LOIO; 1086 sc->tl_res = bus_alloc_resource_any(dev, SYS_RES_IOPORT, &rid, 1087 RF_ACTIVE); 1088 1089 /* 1090 * Some cards have the I/O and memory mapped address registers 1091 * reversed. Try both combinations before giving up. 1092 */ 1093 if (sc->tl_res == NULL) { 1094 rid = TL_PCI_LOMEM; 1095 sc->tl_res = bus_alloc_resource_any(dev, SYS_RES_IOPORT, &rid, 1096 RF_ACTIVE); 1097 } 1098 #else 1099 rid = TL_PCI_LOMEM; 1100 sc->tl_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid, 1101 RF_ACTIVE); 1102 if (sc->tl_res == NULL) { 1103 rid = TL_PCI_LOIO; 1104 sc->tl_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid, 1105 RF_ACTIVE); 1106 } 1107 #endif 1108 1109 if (sc->tl_res == NULL) { 1110 device_printf(dev, "couldn't map ports/memory\n"); 1111 error = ENXIO; 1112 return(error); 1113 } 1114 1115 sc->tl_btag = rman_get_bustag(sc->tl_res); 1116 sc->tl_bhandle = rman_get_bushandle(sc->tl_res); 1117 1118 #ifdef notdef 1119 /* 1120 * The ThunderLAN manual suggests jacking the PCI latency 1121 * timer all the way up to its maximum value. I'm not sure 1122 * if this is really necessary, but what the manual wants, 1123 * the manual gets. 1124 */ 1125 command = pci_read_config(dev, TL_PCI_LATENCY_TIMER, 4); 1126 command |= 0x0000FF00; 1127 pci_write_config(dev, TL_PCI_LATENCY_TIMER, command, 4); 1128 #endif 1129 1130 /* Allocate interrupt */ 1131 rid = 0; 1132 sc->tl_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, 1133 RF_SHAREABLE | RF_ACTIVE); 1134 1135 if (sc->tl_irq == NULL) { 1136 device_printf(dev, "couldn't map interrupt\n"); 1137 error = ENXIO; 1138 goto fail; 1139 } 1140 1141 /* 1142 * Now allocate memory for the TX and RX lists. 1143 */ 1144 sc->tl_ldata = contigmalloc(sizeof(struct tl_list_data), M_DEVBUF, 1145 M_WAITOK | M_ZERO, 0, 0xffffffff, PAGE_SIZE, 0); 1146 1147 if (sc->tl_ldata == NULL) { 1148 device_printf(dev, "no memory for list buffers!\n"); 1149 error = ENXIO; 1150 goto fail; 1151 } 1152 1153 sc->tl_dinfo = t; 1154 if (t->tl_vid == COMPAQ_VENDORID || t->tl_vid == TI_VENDORID) 1155 sc->tl_eeaddr = TL_EEPROM_EADDR; 1156 if (t->tl_vid == OLICOM_VENDORID) 1157 sc->tl_eeaddr = TL_EEPROM_EADDR_OC; 1158 1159 /* Reset the adapter. */ 1160 tl_softreset(sc, 1); 1161 tl_hardreset(dev); 1162 tl_softreset(sc, 1); 1163 1164 ifp = &sc->arpcom.ac_if; 1165 if_initname(ifp, device_get_name(dev), device_get_unit(dev)); 1166 1167 /* 1168 * Get station address from the EEPROM. 1169 */ 1170 if (tl_read_eeprom(sc, eaddr, sc->tl_eeaddr, ETHER_ADDR_LEN)) { 1171 device_printf(dev, "failed to read station address\n"); 1172 error = ENXIO; 1173 goto fail; 1174 } 1175 1176 /* 1177 * XXX Olicom, in its desire to be different from the 1178 * rest of the world, has done strange things with the 1179 * encoding of the station address in the EEPROM. First 1180 * of all, they store the address at offset 0xF8 rather 1181 * than at 0x83 like the ThunderLAN manual suggests. 1182 * Second, they store the address in three 16-bit words in 1183 * network byte order, as opposed to storing it sequentially 1184 * like all the other ThunderLAN cards. In order to get 1185 * the station address in a form that matches what the Olicom 1186 * diagnostic utility specifies, we have to byte-swap each 1187 * word. To make things even more confusing, neither 00:00:28 1188 * nor 00:00:24 appear in the IEEE OUI database. 1189 */ 1190 if (sc->tl_dinfo->tl_vid == OLICOM_VENDORID) { 1191 for (i = 0; i < ETHER_ADDR_LEN; i += 2) { 1192 u_int16_t *p; 1193 p = (u_int16_t *)&eaddr[i]; 1194 *p = ntohs(*p); 1195 } 1196 } 1197 1198 ifp->if_softc = sc; 1199 ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; 1200 ifp->if_ioctl = tl_ioctl; 1201 ifp->if_start = tl_start; 1202 ifp->if_watchdog = tl_watchdog; 1203 ifp->if_init = tl_init; 1204 ifp->if_mtu = ETHERMTU; 1205 ifq_set_maxlen(&ifp->if_snd, TL_TX_LIST_CNT - 1); 1206 ifq_set_ready(&ifp->if_snd); 1207 callout_init(&sc->tl_stat_timer); 1208 1209 /* Reset the adapter again. */ 1210 tl_softreset(sc, 1); 1211 tl_hardreset(dev); 1212 tl_softreset(sc, 1); 1213 1214 /* 1215 * Do MII setup. If no PHYs are found, then this is a 1216 * bitrate ThunderLAN chip that only supports 10baseT 1217 * and AUI/BNC. 1218 */ 1219 if (mii_phy_probe(dev, &sc->tl_miibus, 1220 tl_ifmedia_upd, tl_ifmedia_sts)) { 1221 struct ifmedia *ifm; 1222 sc->tl_bitrate = 1; 1223 ifmedia_init(&sc->ifmedia, 0, tl_ifmedia_upd, tl_ifmedia_sts); 1224 ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_10_T, 0, NULL); 1225 ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_10_T|IFM_HDX, 0, NULL); 1226 ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_10_T|IFM_FDX, 0, NULL); 1227 ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_10_5, 0, NULL); 1228 ifmedia_set(&sc->ifmedia, IFM_ETHER|IFM_10_T); 1229 /* Reset again, this time setting bitrate mode. */ 1230 tl_softreset(sc, 1); 1231 ifm = &sc->ifmedia; 1232 ifm->ifm_media = ifm->ifm_cur->ifm_media; 1233 tl_ifmedia_upd(ifp); 1234 } 1235 1236 /* 1237 * Call MI attach routine. 1238 */ 1239 ether_ifattach(ifp, eaddr, NULL); 1240 1241 error = bus_setup_intr(dev, sc->tl_irq, INTR_MPSAFE, 1242 tl_intr, sc, &sc->tl_intrhand, 1243 ifp->if_serializer); 1244 1245 if (error) { 1246 ether_ifdetach(ifp); 1247 device_printf(dev, "couldn't set up irq\n"); 1248 goto fail; 1249 } 1250 1251 ifp->if_cpuid = ithread_cpuid(rman_get_start(sc->tl_irq)); 1252 KKASSERT(ifp->if_cpuid >= 0 && ifp->if_cpuid < ncpus); 1253 1254 return(0); 1255 1256 fail: 1257 tl_detach(dev); 1258 return(error); 1259 } 1260 1261 static int 1262 tl_detach(device_t dev) 1263 { 1264 struct tl_softc *sc = device_get_softc(dev); 1265 struct ifnet *ifp = &sc->arpcom.ac_if; 1266 1267 if (device_is_attached(dev)) { 1268 lwkt_serialize_enter(ifp->if_serializer); 1269 tl_stop(sc); 1270 bus_teardown_intr(dev, sc->tl_irq, sc->tl_intrhand); 1271 lwkt_serialize_exit(ifp->if_serializer); 1272 1273 ether_ifdetach(ifp); 1274 } 1275 1276 if (sc->tl_miibus) 1277 device_delete_child(dev, sc->tl_miibus); 1278 bus_generic_detach(dev); 1279 1280 if (sc->tl_ldata) 1281 contigfree(sc->tl_ldata, sizeof(struct tl_list_data), M_DEVBUF); 1282 if (sc->tl_bitrate) 1283 ifmedia_removeall(&sc->ifmedia); 1284 if (sc->tl_irq) 1285 bus_release_resource(dev, SYS_RES_IRQ, 0, sc->tl_irq); 1286 if (sc->tl_res) 1287 bus_release_resource(dev, TL_RES, TL_RID, sc->tl_res); 1288 1289 return(0); 1290 } 1291 1292 /* 1293 * Initialize the transmit lists. 1294 */ 1295 static int 1296 tl_list_tx_init(struct tl_softc *sc) 1297 { 1298 struct tl_chain_data *cd; 1299 struct tl_list_data *ld; 1300 int i; 1301 1302 cd = &sc->tl_cdata; 1303 ld = sc->tl_ldata; 1304 for (i = 0; i < TL_TX_LIST_CNT; i++) { 1305 cd->tl_tx_chain[i].tl_ptr = &ld->tl_tx_list[i]; 1306 if (i == (TL_TX_LIST_CNT - 1)) 1307 cd->tl_tx_chain[i].tl_next = NULL; 1308 else 1309 cd->tl_tx_chain[i].tl_next = &cd->tl_tx_chain[i + 1]; 1310 } 1311 1312 cd->tl_tx_free = &cd->tl_tx_chain[0]; 1313 cd->tl_tx_tail = cd->tl_tx_head = NULL; 1314 sc->tl_txeoc = 1; 1315 1316 return(0); 1317 } 1318 1319 /* 1320 * Initialize the RX lists and allocate mbufs for them. 1321 */ 1322 static int 1323 tl_list_rx_init(struct tl_softc *sc) 1324 { 1325 struct tl_chain_data *cd; 1326 struct tl_list_data *ld; 1327 int i; 1328 1329 cd = &sc->tl_cdata; 1330 ld = sc->tl_ldata; 1331 1332 for (i = 0; i < TL_RX_LIST_CNT; i++) { 1333 cd->tl_rx_chain[i].tl_ptr = 1334 (struct tl_list_onefrag *)&ld->tl_rx_list[i]; 1335 if (tl_newbuf(sc, &cd->tl_rx_chain[i]) == ENOBUFS) 1336 return(ENOBUFS); 1337 if (i == (TL_RX_LIST_CNT - 1)) { 1338 cd->tl_rx_chain[i].tl_next = NULL; 1339 ld->tl_rx_list[i].tlist_fptr = 0; 1340 } else { 1341 cd->tl_rx_chain[i].tl_next = &cd->tl_rx_chain[i + 1]; 1342 ld->tl_rx_list[i].tlist_fptr = 1343 vtophys(&ld->tl_rx_list[i + 1]); 1344 } 1345 } 1346 1347 cd->tl_rx_head = &cd->tl_rx_chain[0]; 1348 cd->tl_rx_tail = &cd->tl_rx_chain[TL_RX_LIST_CNT - 1]; 1349 1350 return(0); 1351 } 1352 1353 static int 1354 tl_newbuf(struct tl_softc *sc, struct tl_chain_onefrag *c) 1355 { 1356 struct mbuf *m_new; 1357 1358 m_new = m_getcl(MB_DONTWAIT, MT_DATA, M_PKTHDR); 1359 if (m_new == NULL) 1360 return (ENOBUFS); 1361 1362 c->tl_mbuf = m_new; 1363 c->tl_next = NULL; 1364 c->tl_ptr->tlist_frsize = MCLBYTES; 1365 c->tl_ptr->tlist_fptr = 0; 1366 c->tl_ptr->tl_frag.tlist_dadr = vtophys(mtod(m_new, caddr_t)); 1367 c->tl_ptr->tl_frag.tlist_dcnt = MCLBYTES; 1368 c->tl_ptr->tlist_cstat = TL_CSTAT_READY; 1369 1370 return(0); 1371 } 1372 1373 /* 1374 * Interrupt handler for RX 'end of frame' condition (EOF). This 1375 * tells us that a full ethernet frame has been captured and we need 1376 * to handle it. 1377 * 1378 * Reception is done using 'lists' which consist of a header and a 1379 * series of 10 data count/data address pairs that point to buffers. 1380 * Initially you're supposed to create a list, populate it with pointers 1381 * to buffers, then load the physical address of the list into the 1382 * ch_parm register. The adapter is then supposed to DMA the received 1383 * frame into the buffers for you. 1384 * 1385 * To make things as fast as possible, we have the chip DMA directly 1386 * into mbufs. This saves us from having to do a buffer copy: we can 1387 * just hand the mbufs directly to ether_input(). Once the frame has 1388 * been sent on its way, the 'list' structure is assigned a new buffer 1389 * and moved to the end of the RX chain. As long we we stay ahead of 1390 * the chip, it will always think it has an endless receive channel. 1391 * 1392 * If we happen to fall behind and the chip manages to fill up all of 1393 * the buffers, it will generate an end of channel interrupt and wait 1394 * for us to empty the chain and restart the receiver. 1395 */ 1396 static int 1397 tl_intvec_rxeof(void *xsc, u_int32_t type) 1398 { 1399 struct tl_softc *sc; 1400 int r = 0, total_len = 0; 1401 struct ether_header *eh; 1402 struct mbuf *m; 1403 struct ifnet *ifp; 1404 struct tl_chain_onefrag *cur_rx; 1405 1406 sc = xsc; 1407 ifp = &sc->arpcom.ac_if; 1408 1409 while(sc->tl_cdata.tl_rx_head != NULL) { 1410 cur_rx = sc->tl_cdata.tl_rx_head; 1411 if (!(cur_rx->tl_ptr->tlist_cstat & TL_CSTAT_FRAMECMP)) 1412 break; 1413 r++; 1414 sc->tl_cdata.tl_rx_head = cur_rx->tl_next; 1415 m = cur_rx->tl_mbuf; 1416 total_len = cur_rx->tl_ptr->tlist_frsize; 1417 1418 if (tl_newbuf(sc, cur_rx) == ENOBUFS) { 1419 ifp->if_ierrors++; 1420 cur_rx->tl_ptr->tlist_frsize = MCLBYTES; 1421 cur_rx->tl_ptr->tlist_cstat = TL_CSTAT_READY; 1422 cur_rx->tl_ptr->tl_frag.tlist_dcnt = MCLBYTES; 1423 continue; 1424 } 1425 1426 sc->tl_cdata.tl_rx_tail->tl_ptr->tlist_fptr = 1427 vtophys(cur_rx->tl_ptr); 1428 sc->tl_cdata.tl_rx_tail->tl_next = cur_rx; 1429 sc->tl_cdata.tl_rx_tail = cur_rx; 1430 1431 eh = mtod(m, struct ether_header *); 1432 m->m_pkthdr.rcvif = ifp; 1433 m->m_pkthdr.len = m->m_len = total_len; 1434 1435 /* 1436 * Note: when the ThunderLAN chip is in 'capture all 1437 * frames' mode, it will receive its own transmissions. 1438 * We drop don't need to process our own transmissions, 1439 * so we drop them here and continue. 1440 */ 1441 /*if (ifp->if_flags & IFF_PROMISC && */ 1442 if (!bcmp(eh->ether_shost, sc->arpcom.ac_enaddr, 1443 ETHER_ADDR_LEN)) { 1444 m_freem(m); 1445 continue; 1446 } 1447 1448 ifp->if_input(ifp, m); 1449 } 1450 1451 return(r); 1452 } 1453 1454 /* 1455 * The RX-EOC condition hits when the ch_parm address hasn't been 1456 * initialized or the adapter reached a list with a forward pointer 1457 * of 0 (which indicates the end of the chain). In our case, this means 1458 * the card has hit the end of the receive buffer chain and we need to 1459 * empty out the buffers and shift the pointer back to the beginning again. 1460 */ 1461 static int 1462 tl_intvec_rxeoc(void *xsc, u_int32_t type) 1463 { 1464 struct tl_softc *sc; 1465 int r; 1466 struct tl_chain_data *cd; 1467 1468 1469 sc = xsc; 1470 cd = &sc->tl_cdata; 1471 1472 /* Flush out the receive queue and ack RXEOF interrupts. */ 1473 r = tl_intvec_rxeof(xsc, type); 1474 CMD_PUT(sc, TL_CMD_ACK | r | (type & ~(0x00100000))); 1475 r = 1; 1476 cd->tl_rx_head = &cd->tl_rx_chain[0]; 1477 cd->tl_rx_tail = &cd->tl_rx_chain[TL_RX_LIST_CNT - 1]; 1478 CSR_WRITE_4(sc, TL_CH_PARM, vtophys(sc->tl_cdata.tl_rx_head->tl_ptr)); 1479 r |= (TL_CMD_GO|TL_CMD_RT); 1480 return(r); 1481 } 1482 1483 static int 1484 tl_intvec_txeof(void *xsc, u_int32_t type) 1485 { 1486 struct tl_softc *sc; 1487 int r = 0; 1488 struct tl_chain *cur_tx; 1489 1490 sc = xsc; 1491 1492 /* 1493 * Go through our tx list and free mbufs for those 1494 * frames that have been sent. 1495 */ 1496 while (sc->tl_cdata.tl_tx_head != NULL) { 1497 cur_tx = sc->tl_cdata.tl_tx_head; 1498 if (!(cur_tx->tl_ptr->tlist_cstat & TL_CSTAT_FRAMECMP)) 1499 break; 1500 sc->tl_cdata.tl_tx_head = cur_tx->tl_next; 1501 1502 r++; 1503 m_freem(cur_tx->tl_mbuf); 1504 cur_tx->tl_mbuf = NULL; 1505 1506 cur_tx->tl_next = sc->tl_cdata.tl_tx_free; 1507 sc->tl_cdata.tl_tx_free = cur_tx; 1508 if (!cur_tx->tl_ptr->tlist_fptr) 1509 break; 1510 } 1511 1512 return(r); 1513 } 1514 1515 /* 1516 * The transmit end of channel interrupt. The adapter triggers this 1517 * interrupt to tell us it hit the end of the current transmit list. 1518 * 1519 * A note about this: it's possible for a condition to arise where 1520 * tl_start() may try to send frames between TXEOF and TXEOC interrupts. 1521 * You have to avoid this since the chip expects things to go in a 1522 * particular order: transmit, acknowledge TXEOF, acknowledge TXEOC. 1523 * When the TXEOF handler is called, it will free all of the transmitted 1524 * frames and reset the tx_head pointer to NULL. However, a TXEOC 1525 * interrupt should be received and acknowledged before any more frames 1526 * are queued for transmission. If tl_statrt() is called after TXEOF 1527 * resets the tx_head pointer but _before_ the TXEOC interrupt arrives, 1528 * it could attempt to issue a transmit command prematurely. 1529 * 1530 * To guard against this, tl_start() will only issue transmit commands 1531 * if the tl_txeoc flag is set, and only the TXEOC interrupt handler 1532 * can set this flag once tl_start() has cleared it. 1533 */ 1534 static int 1535 tl_intvec_txeoc(void *xsc, u_int32_t type) 1536 { 1537 struct tl_softc *sc; 1538 struct ifnet *ifp; 1539 u_int32_t cmd; 1540 1541 sc = xsc; 1542 ifp = &sc->arpcom.ac_if; 1543 1544 /* Clear the timeout timer. */ 1545 ifp->if_timer = 0; 1546 1547 if (sc->tl_cdata.tl_tx_head == NULL) { 1548 ifp->if_flags &= ~IFF_OACTIVE; 1549 sc->tl_cdata.tl_tx_tail = NULL; 1550 sc->tl_txeoc = 1; 1551 } else { 1552 sc->tl_txeoc = 0; 1553 /* First we have to ack the EOC interrupt. */ 1554 CMD_PUT(sc, TL_CMD_ACK | 0x00000001 | type); 1555 /* Then load the address of the next TX list. */ 1556 CSR_WRITE_4(sc, TL_CH_PARM, 1557 vtophys(sc->tl_cdata.tl_tx_head->tl_ptr)); 1558 /* Restart TX channel. */ 1559 cmd = CSR_READ_4(sc, TL_HOSTCMD); 1560 cmd &= ~TL_CMD_RT; 1561 cmd |= TL_CMD_GO|TL_CMD_INTSON; 1562 CMD_PUT(sc, cmd); 1563 return(0); 1564 } 1565 1566 return(1); 1567 } 1568 1569 static int 1570 tl_intvec_adchk(void *xsc, u_int32_t type) 1571 { 1572 struct tl_softc *sc; 1573 1574 sc = xsc; 1575 1576 if (type) { 1577 if_printf(&sc->arpcom.ac_if, "adapter check: %x\n", 1578 (unsigned int)CSR_READ_4(sc, TL_CH_PARM)); 1579 } 1580 1581 tl_softreset(sc, 1); 1582 tl_stop(sc); 1583 tl_init(sc); 1584 CMD_SET(sc, TL_CMD_INTSON); 1585 1586 return(0); 1587 } 1588 1589 static int 1590 tl_intvec_netsts(void *xsc, u_int32_t type) 1591 { 1592 struct tl_softc *sc; 1593 u_int16_t netsts; 1594 1595 sc = xsc; 1596 1597 netsts = tl_dio_read16(sc, TL_NETSTS); 1598 tl_dio_write16(sc, TL_NETSTS, netsts); 1599 1600 if_printf(&sc->arpcom.ac_if, "network status: %x\n", netsts); 1601 1602 return(1); 1603 } 1604 1605 static void 1606 tl_intr(void *xsc) 1607 { 1608 struct tl_softc *sc; 1609 struct ifnet *ifp; 1610 int r = 0; 1611 u_int32_t type = 0; 1612 u_int16_t ints = 0; 1613 u_int8_t ivec = 0; 1614 1615 sc = xsc; 1616 1617 /* Disable interrupts */ 1618 ints = CSR_READ_2(sc, TL_HOST_INT); 1619 CSR_WRITE_2(sc, TL_HOST_INT, ints); 1620 type = (ints << 16) & 0xFFFF0000; 1621 ivec = (ints & TL_VEC_MASK) >> 5; 1622 ints = (ints & TL_INT_MASK) >> 2; 1623 1624 ifp = &sc->arpcom.ac_if; 1625 1626 switch(ints) { 1627 case (TL_INTR_INVALID): 1628 #ifdef DIAGNOSTIC 1629 if_printf(ifp, "got an invalid interrupt!\n"); 1630 #endif 1631 /* Re-enable interrupts but don't ack this one. */ 1632 CMD_PUT(sc, type); 1633 r = 0; 1634 break; 1635 case (TL_INTR_TXEOF): 1636 r = tl_intvec_txeof((void *)sc, type); 1637 break; 1638 case (TL_INTR_TXEOC): 1639 r = tl_intvec_txeoc((void *)sc, type); 1640 break; 1641 case (TL_INTR_STATOFLOW): 1642 tl_stats_update_serialized(sc); 1643 r = 1; 1644 break; 1645 case (TL_INTR_RXEOF): 1646 r = tl_intvec_rxeof((void *)sc, type); 1647 break; 1648 case (TL_INTR_DUMMY): 1649 if_printf(ifp, "got a dummy interrupt\n"); 1650 r = 1; 1651 break; 1652 case (TL_INTR_ADCHK): 1653 if (ivec) 1654 r = tl_intvec_adchk((void *)sc, type); 1655 else 1656 r = tl_intvec_netsts((void *)sc, type); 1657 break; 1658 case (TL_INTR_RXEOC): 1659 r = tl_intvec_rxeoc((void *)sc, type); 1660 break; 1661 default: 1662 if_printf(ifp, "bogus interrupt type\n"); 1663 break; 1664 } 1665 1666 /* Re-enable interrupts */ 1667 if (r) { 1668 CMD_PUT(sc, TL_CMD_ACK | r | type); 1669 } 1670 1671 if (!ifq_is_empty(&ifp->if_snd)) 1672 if_devstart(ifp); 1673 } 1674 1675 static 1676 void 1677 tl_stats_update(void *xsc) 1678 { 1679 struct tl_softc *sc = xsc; 1680 struct ifnet *ifp = &sc->arpcom.ac_if; 1681 1682 lwkt_serialize_enter(ifp->if_serializer); 1683 tl_stats_update_serialized(xsc); 1684 lwkt_serialize_exit(ifp->if_serializer); 1685 } 1686 1687 static 1688 void 1689 tl_stats_update_serialized(void *xsc) 1690 { 1691 struct tl_softc *sc; 1692 struct ifnet *ifp; 1693 struct tl_stats tl_stats; 1694 struct mii_data *mii; 1695 u_int32_t *p; 1696 1697 bzero((char *)&tl_stats, sizeof(struct tl_stats)); 1698 1699 sc = xsc; 1700 ifp = &sc->arpcom.ac_if; 1701 1702 p = (u_int32_t *)&tl_stats; 1703 1704 CSR_WRITE_2(sc, TL_DIO_ADDR, TL_TXGOODFRAMES|TL_DIO_ADDR_INC); 1705 *p++ = CSR_READ_4(sc, TL_DIO_DATA); 1706 *p++ = CSR_READ_4(sc, TL_DIO_DATA); 1707 *p++ = CSR_READ_4(sc, TL_DIO_DATA); 1708 *p++ = CSR_READ_4(sc, TL_DIO_DATA); 1709 *p++ = CSR_READ_4(sc, TL_DIO_DATA); 1710 1711 ifp->if_opackets += tl_tx_goodframes(tl_stats); 1712 ifp->if_collisions += tl_stats.tl_tx_single_collision + 1713 tl_stats.tl_tx_multi_collision; 1714 ifp->if_ipackets += tl_rx_goodframes(tl_stats); 1715 ifp->if_ierrors += tl_stats.tl_crc_errors + tl_stats.tl_code_errors + 1716 tl_rx_overrun(tl_stats); 1717 ifp->if_oerrors += tl_tx_underrun(tl_stats); 1718 1719 if (tl_tx_underrun(tl_stats)) { 1720 u_int8_t tx_thresh; 1721 tx_thresh = tl_dio_read8(sc, TL_ACOMMIT) & TL_AC_TXTHRESH; 1722 if (tx_thresh != TL_AC_TXTHRESH_WHOLEPKT) { 1723 tx_thresh >>= 4; 1724 tx_thresh++; 1725 if_printf(ifp, "tx underrun -- increasing " 1726 "tx threshold to %d bytes\n", 1727 (64 * (tx_thresh * 4))); 1728 tl_dio_clrbit(sc, TL_ACOMMIT, TL_AC_TXTHRESH); 1729 tl_dio_setbit(sc, TL_ACOMMIT, tx_thresh << 4); 1730 } 1731 } 1732 1733 callout_reset(&sc->tl_stat_timer, hz, tl_stats_update, sc); 1734 1735 if (!sc->tl_bitrate) { 1736 mii = device_get_softc(sc->tl_miibus); 1737 mii_tick(mii); 1738 } 1739 } 1740 1741 /* 1742 * Encapsulate an mbuf chain in a list by coupling the mbuf data 1743 * pointers to the fragment pointers. 1744 */ 1745 static int 1746 tl_encap(struct tl_softc *sc, struct tl_chain *c, struct mbuf *m_head) 1747 { 1748 int frag = 0; 1749 struct tl_frag *f = NULL; 1750 int total_len; 1751 struct mbuf *m; 1752 1753 /* 1754 * Start packing the mbufs in this chain into 1755 * the fragment pointers. Stop when we run out 1756 * of fragments or hit the end of the mbuf chain. 1757 */ 1758 m = m_head; 1759 total_len = 0; 1760 1761 for (m = m_head, frag = 0; m != NULL; m = m->m_next) { 1762 if (m->m_len != 0) { 1763 if (frag == TL_MAXFRAGS) 1764 break; 1765 total_len+= m->m_len; 1766 c->tl_ptr->tl_frag[frag].tlist_dadr = 1767 vtophys(mtod(m, vm_offset_t)); 1768 c->tl_ptr->tl_frag[frag].tlist_dcnt = m->m_len; 1769 frag++; 1770 } 1771 } 1772 1773 /* 1774 * Handle special cases. 1775 * Special case #1: we used up all 10 fragments, but 1776 * we have more mbufs left in the chain. Copy the 1777 * data into an mbuf cluster. Note that we don't 1778 * bother clearing the values in the other fragment 1779 * pointers/counters; it wouldn't gain us anything, 1780 * and would waste cycles. 1781 */ 1782 if (m != NULL) { 1783 struct mbuf *m_new; 1784 1785 m_new = m_getl(m_head->m_pkthdr.len, MB_DONTWAIT, MT_DATA, 1786 M_PKTHDR, NULL); 1787 if (m_new == NULL) { 1788 if_printf(&sc->arpcom.ac_if, "no memory for tx list\n"); 1789 return (1); 1790 } 1791 m_copydata(m_head, 0, m_head->m_pkthdr.len, 1792 mtod(m_new, caddr_t)); 1793 m_new->m_pkthdr.len = m_new->m_len = m_head->m_pkthdr.len; 1794 m_freem(m_head); 1795 m_head = m_new; 1796 f = &c->tl_ptr->tl_frag[0]; 1797 f->tlist_dadr = vtophys(mtod(m_new, caddr_t)); 1798 f->tlist_dcnt = total_len = m_new->m_len; 1799 frag = 1; 1800 } 1801 1802 /* 1803 * Special case #2: the frame is smaller than the minimum 1804 * frame size. We have to pad it to make the chip happy. 1805 */ 1806 if (total_len < TL_MIN_FRAMELEN) { 1807 if (frag == TL_MAXFRAGS) { 1808 if_printf(&sc->arpcom.ac_if, "all frags filled but " 1809 "frame still to small!\n"); 1810 } 1811 f = &c->tl_ptr->tl_frag[frag]; 1812 f->tlist_dcnt = TL_MIN_FRAMELEN - total_len; 1813 f->tlist_dadr = vtophys(&sc->tl_ldata->tl_pad); 1814 total_len += f->tlist_dcnt; 1815 frag++; 1816 } 1817 1818 c->tl_mbuf = m_head; 1819 c->tl_ptr->tl_frag[frag - 1].tlist_dcnt |= TL_LAST_FRAG; 1820 c->tl_ptr->tlist_frsize = total_len; 1821 c->tl_ptr->tlist_cstat = TL_CSTAT_READY; 1822 c->tl_ptr->tlist_fptr = 0; 1823 1824 return(0); 1825 } 1826 1827 /* 1828 * Main transmit routine. To avoid having to do mbuf copies, we put pointers 1829 * to the mbuf data regions directly in the transmit lists. We also save a 1830 * copy of the pointers since the transmit list fragment pointers are 1831 * physical addresses. 1832 */ 1833 static void 1834 tl_start(struct ifnet *ifp) 1835 { 1836 struct tl_softc *sc; 1837 struct mbuf *m_head = NULL; 1838 u_int32_t cmd; 1839 struct tl_chain *prev = NULL, *cur_tx = NULL, *start_tx; 1840 1841 sc = ifp->if_softc; 1842 1843 /* 1844 * Check for an available queue slot. If there are none, 1845 * punt. 1846 */ 1847 if (sc->tl_cdata.tl_tx_free == NULL) { 1848 ifp->if_flags |= IFF_OACTIVE; 1849 return; 1850 } 1851 1852 start_tx = sc->tl_cdata.tl_tx_free; 1853 1854 while(sc->tl_cdata.tl_tx_free != NULL) { 1855 m_head = ifq_dequeue(&ifp->if_snd, NULL); 1856 if (m_head == NULL) 1857 break; 1858 1859 /* Pick a chain member off the free list. */ 1860 cur_tx = sc->tl_cdata.tl_tx_free; 1861 sc->tl_cdata.tl_tx_free = cur_tx->tl_next; 1862 1863 cur_tx->tl_next = NULL; 1864 1865 /* Pack the data into the list. */ 1866 tl_encap(sc, cur_tx, m_head); 1867 1868 /* Chain it together */ 1869 if (prev != NULL) { 1870 prev->tl_next = cur_tx; 1871 prev->tl_ptr->tlist_fptr = vtophys(cur_tx->tl_ptr); 1872 } 1873 prev = cur_tx; 1874 1875 BPF_MTAP(ifp, cur_tx->tl_mbuf); 1876 } 1877 1878 /* 1879 * If there are no packets queued, bail. 1880 */ 1881 if (cur_tx == NULL) 1882 return; 1883 1884 /* 1885 * That's all we can stands, we can't stands no more. 1886 * If there are no other transfers pending, then issue the 1887 * TX GO command to the adapter to start things moving. 1888 * Otherwise, just leave the data in the queue and let 1889 * the EOF/EOC interrupt handler send. 1890 */ 1891 if (sc->tl_cdata.tl_tx_head == NULL) { 1892 sc->tl_cdata.tl_tx_head = start_tx; 1893 sc->tl_cdata.tl_tx_tail = cur_tx; 1894 1895 if (sc->tl_txeoc) { 1896 sc->tl_txeoc = 0; 1897 CSR_WRITE_4(sc, TL_CH_PARM, vtophys(start_tx->tl_ptr)); 1898 cmd = CSR_READ_4(sc, TL_HOSTCMD); 1899 cmd &= ~TL_CMD_RT; 1900 cmd |= TL_CMD_GO|TL_CMD_INTSON; 1901 CMD_PUT(sc, cmd); 1902 } 1903 } else { 1904 sc->tl_cdata.tl_tx_tail->tl_next = start_tx; 1905 sc->tl_cdata.tl_tx_tail = cur_tx; 1906 } 1907 1908 /* 1909 * Set a timeout in case the chip goes out to lunch. 1910 */ 1911 ifp->if_timer = 5; 1912 1913 return; 1914 } 1915 1916 static void 1917 tl_init(void *xsc) 1918 { 1919 struct tl_softc *sc = xsc; 1920 struct ifnet *ifp = &sc->arpcom.ac_if; 1921 struct mii_data *mii; 1922 1923 /* 1924 * Cancel pending I/O. 1925 */ 1926 tl_stop(sc); 1927 1928 /* Initialize TX FIFO threshold */ 1929 tl_dio_clrbit(sc, TL_ACOMMIT, TL_AC_TXTHRESH); 1930 tl_dio_setbit(sc, TL_ACOMMIT, TL_AC_TXTHRESH_16LONG); 1931 1932 /* Set PCI burst size */ 1933 tl_dio_write8(sc, TL_BSIZEREG, TL_RXBURST_16LONG|TL_TXBURST_16LONG); 1934 1935 /* 1936 * Set 'capture all frames' bit for promiscuous mode. 1937 */ 1938 if (ifp->if_flags & IFF_PROMISC) 1939 tl_dio_setbit(sc, TL_NETCMD, TL_CMD_CAF); 1940 else 1941 tl_dio_clrbit(sc, TL_NETCMD, TL_CMD_CAF); 1942 1943 /* 1944 * Set capture broadcast bit to capture broadcast frames. 1945 */ 1946 if (ifp->if_flags & IFF_BROADCAST) 1947 tl_dio_clrbit(sc, TL_NETCMD, TL_CMD_NOBRX); 1948 else 1949 tl_dio_setbit(sc, TL_NETCMD, TL_CMD_NOBRX); 1950 1951 tl_dio_write16(sc, TL_MAXRX, MCLBYTES); 1952 1953 /* Init our MAC address */ 1954 tl_setfilt(sc, (caddr_t)&sc->arpcom.ac_enaddr, 0); 1955 1956 /* Init multicast filter, if needed. */ 1957 tl_setmulti(sc); 1958 1959 /* Init circular RX list. */ 1960 if (tl_list_rx_init(sc) == ENOBUFS) { 1961 if_printf(ifp, "initialization failed: no " 1962 "memory for rx buffers\n"); 1963 tl_stop(sc); 1964 return; 1965 } 1966 1967 /* Init TX pointers. */ 1968 tl_list_tx_init(sc); 1969 1970 /* Enable PCI interrupts. */ 1971 CMD_SET(sc, TL_CMD_INTSON); 1972 1973 /* Load the address of the rx list */ 1974 CMD_SET(sc, TL_CMD_RT); 1975 CSR_WRITE_4(sc, TL_CH_PARM, vtophys(&sc->tl_ldata->tl_rx_list[0])); 1976 1977 if (!sc->tl_bitrate) { 1978 if (sc->tl_miibus != NULL) { 1979 mii = device_get_softc(sc->tl_miibus); 1980 mii_mediachg(mii); 1981 } 1982 } 1983 1984 /* Send the RX go command */ 1985 CMD_SET(sc, TL_CMD_GO|TL_CMD_NES|TL_CMD_RT); 1986 1987 ifp->if_flags |= IFF_RUNNING; 1988 ifp->if_flags &= ~IFF_OACTIVE; 1989 1990 /* Start the stats update counter */ 1991 callout_reset(&sc->tl_stat_timer, hz, tl_stats_update, sc); 1992 } 1993 1994 /* 1995 * Set media options. 1996 */ 1997 static int 1998 tl_ifmedia_upd(struct ifnet *ifp) 1999 { 2000 struct tl_softc *sc; 2001 struct mii_data *mii = NULL; 2002 2003 sc = ifp->if_softc; 2004 2005 if (sc->tl_bitrate) 2006 tl_setmode(sc, sc->ifmedia.ifm_media); 2007 else { 2008 mii = device_get_softc(sc->tl_miibus); 2009 mii_mediachg(mii); 2010 } 2011 2012 return(0); 2013 } 2014 2015 /* 2016 * Report current media status. 2017 */ 2018 static void 2019 tl_ifmedia_sts(struct ifnet *ifp, struct ifmediareq *ifmr) 2020 { 2021 struct tl_softc *sc; 2022 struct mii_data *mii; 2023 2024 sc = ifp->if_softc; 2025 2026 ifmr->ifm_active = IFM_ETHER; 2027 2028 if (sc->tl_bitrate) { 2029 if (tl_dio_read8(sc, TL_ACOMMIT) & TL_AC_MTXD1) 2030 ifmr->ifm_active = IFM_ETHER|IFM_10_5; 2031 else 2032 ifmr->ifm_active = IFM_ETHER|IFM_10_T; 2033 if (tl_dio_read8(sc, TL_ACOMMIT) & TL_AC_MTXD3) 2034 ifmr->ifm_active |= IFM_HDX; 2035 else 2036 ifmr->ifm_active |= IFM_FDX; 2037 return; 2038 } else { 2039 mii = device_get_softc(sc->tl_miibus); 2040 mii_pollstat(mii); 2041 ifmr->ifm_active = mii->mii_media_active; 2042 ifmr->ifm_status = mii->mii_media_status; 2043 } 2044 2045 return; 2046 } 2047 2048 static int 2049 tl_ioctl(struct ifnet *ifp, u_long command, caddr_t data, struct ucred *cr) 2050 { 2051 struct tl_softc *sc = ifp->if_softc; 2052 struct ifreq *ifr = (struct ifreq *) data; 2053 int error = 0; 2054 2055 switch(command) { 2056 case SIOCSIFFLAGS: 2057 if (ifp->if_flags & IFF_UP) { 2058 if (ifp->if_flags & IFF_RUNNING && 2059 ifp->if_flags & IFF_PROMISC && 2060 !(sc->tl_if_flags & IFF_PROMISC)) { 2061 tl_dio_setbit(sc, TL_NETCMD, TL_CMD_CAF); 2062 tl_setmulti(sc); 2063 } else if (ifp->if_flags & IFF_RUNNING && 2064 !(ifp->if_flags & IFF_PROMISC) && 2065 sc->tl_if_flags & IFF_PROMISC) { 2066 tl_dio_clrbit(sc, TL_NETCMD, TL_CMD_CAF); 2067 tl_setmulti(sc); 2068 } else 2069 tl_init(sc); 2070 } else { 2071 if (ifp->if_flags & IFF_RUNNING) { 2072 tl_stop(sc); 2073 } 2074 } 2075 sc->tl_if_flags = ifp->if_flags; 2076 error = 0; 2077 break; 2078 case SIOCADDMULTI: 2079 case SIOCDELMULTI: 2080 tl_setmulti(sc); 2081 error = 0; 2082 break; 2083 case SIOCSIFMEDIA: 2084 case SIOCGIFMEDIA: 2085 if (sc->tl_bitrate) 2086 error = ifmedia_ioctl(ifp, ifr, &sc->ifmedia, command); 2087 else { 2088 struct mii_data *mii; 2089 mii = device_get_softc(sc->tl_miibus); 2090 error = ifmedia_ioctl(ifp, ifr, 2091 &mii->mii_media, command); 2092 } 2093 break; 2094 default: 2095 error = ether_ioctl(ifp, command, data); 2096 break; 2097 } 2098 return(error); 2099 } 2100 2101 static void 2102 tl_watchdog(struct ifnet *ifp) 2103 { 2104 struct tl_softc *sc; 2105 2106 sc = ifp->if_softc; 2107 2108 if_printf(ifp, "device timeout\n"); 2109 2110 ifp->if_oerrors++; 2111 2112 tl_softreset(sc, 1); 2113 tl_init(sc); 2114 2115 return; 2116 } 2117 2118 /* 2119 * Stop the adapter and free any mbufs allocated to the 2120 * RX and TX lists. 2121 */ 2122 static void 2123 tl_stop(struct tl_softc *sc) 2124 { 2125 int i; 2126 struct ifnet *ifp; 2127 2128 ifp = &sc->arpcom.ac_if; 2129 2130 /* Stop the stats updater. */ 2131 callout_stop(&sc->tl_stat_timer); 2132 2133 /* Stop the transmitter */ 2134 CMD_CLR(sc, TL_CMD_RT); 2135 CMD_SET(sc, TL_CMD_STOP); 2136 CSR_WRITE_4(sc, TL_CH_PARM, 0); 2137 2138 /* Stop the receiver */ 2139 CMD_SET(sc, TL_CMD_RT); 2140 CMD_SET(sc, TL_CMD_STOP); 2141 CSR_WRITE_4(sc, TL_CH_PARM, 0); 2142 2143 /* 2144 * Disable host interrupts. 2145 */ 2146 CMD_SET(sc, TL_CMD_INTSOFF); 2147 2148 /* 2149 * Clear list pointer. 2150 */ 2151 CSR_WRITE_4(sc, TL_CH_PARM, 0); 2152 2153 /* 2154 * Free the RX lists. 2155 */ 2156 for (i = 0; i < TL_RX_LIST_CNT; i++) { 2157 if (sc->tl_cdata.tl_rx_chain[i].tl_mbuf != NULL) { 2158 m_freem(sc->tl_cdata.tl_rx_chain[i].tl_mbuf); 2159 sc->tl_cdata.tl_rx_chain[i].tl_mbuf = NULL; 2160 } 2161 } 2162 bzero((char *)&sc->tl_ldata->tl_rx_list, 2163 sizeof(sc->tl_ldata->tl_rx_list)); 2164 2165 /* 2166 * Free the TX list buffers. 2167 */ 2168 for (i = 0; i < TL_TX_LIST_CNT; i++) { 2169 if (sc->tl_cdata.tl_tx_chain[i].tl_mbuf != NULL) { 2170 m_freem(sc->tl_cdata.tl_tx_chain[i].tl_mbuf); 2171 sc->tl_cdata.tl_tx_chain[i].tl_mbuf = NULL; 2172 } 2173 } 2174 bzero((char *)&sc->tl_ldata->tl_tx_list, 2175 sizeof(sc->tl_ldata->tl_tx_list)); 2176 2177 ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE); 2178 2179 return; 2180 } 2181 2182 /* 2183 * Stop all chip I/O so that the kernel's probe routines don't 2184 * get confused by errant DMAs when rebooting. 2185 */ 2186 static void 2187 tl_shutdown(device_t dev) 2188 { 2189 struct tl_softc *sc; 2190 2191 sc = device_get_softc(dev); 2192 2193 tl_stop(sc); 2194 2195 return; 2196 } 2197