1 /* 2 * Copyright (c) 1997, 1998 3 * Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 3. All advertising materials mentioning features or use of this software 14 * must display the following acknowledgement: 15 * This product includes software developed by Bill Paul. 16 * 4. Neither the name of the author nor the names of any co-contributors 17 * may be used to endorse or promote products derived from this software 18 * without specific prior written permission. 19 * 20 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND 21 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 22 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 23 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD 24 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 25 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 26 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 27 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 29 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 30 * THE POSSIBILITY OF SUCH DAMAGE. 31 * 32 * $FreeBSD: src/sys/pci/if_wbreg.h,v 1.7 1999/08/30 23:08:30 wpaul Exp $ 33 */ 34 35 /* 36 * Winbond register definitions. 37 */ 38 39 #define WB_BUSCTL 0x00 /* bus control */ 40 #define WB_TXSTART 0x04 /* tx start demand */ 41 #define WB_RXSTART 0x08 /* rx start demand */ 42 #define WB_RXADDR 0x0C /* rx descriptor list start addr */ 43 #define WB_TXADDR 0x10 /* tx descriptor list start addr */ 44 #define WB_ISR 0x14 /* interrupt status register */ 45 #define WB_NETCFG 0x18 /* network config register */ 46 #define WB_IMR 0x1C /* interrupt mask */ 47 #define WB_FRAMESDISCARDED 0x20 /* # of discarded frames */ 48 #define WB_SIO 0x24 /* MII and ROM/EEPROM access */ 49 #define WB_BOOTROMADDR 0x28 50 #define WB_TIMER 0x2C /* general timer */ 51 #define WB_CURRXCTL 0x30 /* current RX descriptor */ 52 #define WB_CURRXBUF 0x34 /* current RX buffer */ 53 #define WB_MAR0 0x38 /* multicast filter 0 */ 54 #define WB_MAR1 0x3C /* multicast filter 1 */ 55 #define WB_NODE0 0x40 /* station address 0 */ 56 #define WB_NODE1 0x44 /* station address 1 */ 57 #define WB_BOOTROMSIZE 0x48 /* boot ROM size */ 58 #define WB_CURTXCTL 0x4C /* current TX descriptor */ 59 #define WB_CURTXBUF 0x50 /* current TX buffer */ 60 61 /* 62 * Bus control bits. 63 */ 64 #define WB_BUSCTL_RESET 0x00000001 65 #define WB_BUSCTL_ARBITRATION 0x00000002 66 #define WB_BUSCTL_SKIPLEN 0x0000007C 67 #define WB_BUSCTL_BUF_BIGENDIAN 0x00000080 68 #define WB_BUSCTL_BURSTLEN 0x00003F00 69 #define WB_BUSCTL_CACHEALIGN 0x0000C000 70 #define WB_BUSCTL_DES_BIGENDIAN 0x00100000 71 #define WB_BUSCTL_WAIT 0x00200000 72 #define WB_BUSCTL_MUSTBEONE 0x00400000 73 74 #define WB_SKIPLEN_1LONG 0x00000004 75 #define WB_SKIPLEN_2LONG 0x00000008 76 #define WB_SKIPLEN_3LONG 0x00000010 77 #define WB_SKIPLEN_4LONG 0x00000020 78 #define WB_SKIPLEN_5LONG 0x00000040 79 80 #define WB_CACHEALIGN_NONE 0x00000000 81 #define WB_CACHEALIGN_8LONG 0x00004000 82 #define WB_CACHEALIGN_16LONG 0x00008000 83 #define WB_CACHEALIGN_32LONG 0x0000C000 84 85 #define WB_BURSTLEN_USECA 0x00000000 86 #define WB_BURSTLEN_1LONG 0x00000100 87 #define WB_BURSTLEN_2LONG 0x00000200 88 #define WB_BURSTLEN_4LONG 0x00000400 89 #define WB_BURSTLEN_8LONG 0x00000800 90 #define WB_BURSTLEN_16LONG 0x00001000 91 #define WB_BURSTLEN_32LONG 0x00002000 92 93 #define WB_BUSCTL_CONFIG (WB_CACHEALIGN_8LONG|WB_SKIPLEN_3LONG| \ 94 WB_BURSTLEN_8LONG) 95 96 /* 97 * Interrupt status bits. 98 */ 99 #define WB_ISR_TX_OK 0x00000001 100 #define WB_ISR_TX_IDLE 0x00000002 101 #define WB_ISR_TX_NOBUF 0x00000004 102 #define WB_ISR_RX_EARLY 0x00000008 103 #define WB_ISR_RX_ERR 0x00000010 104 #define WB_ISR_TX_UNDERRUN 0x00000020 105 #define WB_ISR_RX_OK 0x00000040 106 #define WB_ISR_RX_NOBUF 0x00000080 107 #define WB_ISR_RX_IDLE 0x00000100 108 #define WB_ISR_TX_EARLY 0x00000400 109 #define WB_ISR_TIMER_EXPIRED 0x00000800 110 #define WB_ISR_BUS_ERR 0x00002000 111 #define WB_ISR_ABNORMAL 0x00008000 112 #define WB_ISR_NORMAL 0x00010000 113 #define WB_ISR_RX_STATE 0x000E0000 114 #define WB_ISR_TX_STATE 0x00700000 115 #define WB_ISR_BUSERRTYPE 0x03800000 116 117 /* 118 * The RX_STATE and TX_STATE fields are not described anywhere in the 119 * Winbond datasheet, however it appears that the Winbond chip is an 120 * attempt at a DEC 'tulip' clone, hence the ISR register is identical 121 * to that of the tulip chip and we can steal the bit definitions from 122 * the tulip documentation. 123 */ 124 #define WB_RXSTATE_STOPPED 0x00000000 /* 000 - Stopped */ 125 #define WB_RXSTATE_FETCH 0x00020000 /* 001 - Fetching descriptor */ 126 #define WB_RXSTATE_ENDCHECK 0x00040000 /* 010 - check for rx end */ 127 #define WB_RXSTATE_WAIT 0x00060000 /* 011 - waiting for packet */ 128 #define WB_RXSTATE_SUSPEND 0x00080000 /* 100 - suspend rx */ 129 #define WB_RXSTATE_CLOSE 0x000A0000 /* 101 - close tx desc */ 130 #define WB_RXSTATE_FLUSH 0x000C0000 /* 110 - flush from FIFO */ 131 #define WB_RXSTATE_DEQUEUE 0x000E0000 /* 111 - dequeue from FIFO */ 132 133 #define WB_TXSTATE_RESET 0x00000000 /* 000 - reset */ 134 #define WB_TXSTATE_FETCH 0x00100000 /* 001 - fetching descriptor */ 135 #define WB_TXSTATE_WAITEND 0x00200000 /* 010 - wait for tx end */ 136 #define WB_TXSTATE_READING 0x00300000 /* 011 - read and enqueue */ 137 #define WB_TXSTATE_RSVD 0x00400000 /* 100 - reserved */ 138 #define WB_TXSTATE_SETUP 0x00500000 /* 101 - setup packet */ 139 #define WB_TXSTATE_SUSPEND 0x00600000 /* 110 - suspend tx */ 140 #define WB_TXSTATE_CLOSE 0x00700000 /* 111 - close tx desc */ 141 142 /* 143 * Network config bits. 144 */ 145 #define WB_NETCFG_RX_ON 0x00000002 146 #define WB_NETCFG_RX_ALLPHYS 0x00000008 147 #define WB_NETCFG_RX_MULTI 0x00000010 148 #define WB_NETCFG_RX_BROAD 0x00000020 149 #define WB_NETCFG_RX_RUNT 0x00000040 150 #define WB_NETCFG_RX_ERR 0x00000080 151 #define WB_NETCFG_FULLDUPLEX 0x00000200 152 #define WB_NETCFG_LOOPBACK 0x00000C00 153 #define WB_NETCFG_TX_ON 0x00002000 154 #define WB_NETCFG_TX_THRESH 0x001FC000 155 #define WB_NETCFG_RX_EARLYTHRSH 0x1FE00000 156 #define WB_NETCFG_100MBPS 0x20000000 157 #define WB_NETCFG_TX_EARLY_ON 0x40000000 158 #define WB_NETCFG_RX_EARLY_ON 0x80000000 159 160 /* 161 * The tx threshold can be adjusted in increments of 32 bytes. 162 */ 163 #define WB_TXTHRESH(x) ((x >> 5) << 14) 164 #define WB_TXTHRESH_CHUNK 32 165 #define WB_TXTHRESH_INIT 0 /*72*/ 166 167 /* 168 * Interrupt mask bits. 169 */ 170 #define WB_IMR_TX_OK 0x00000001 171 #define WB_IMR_TX_IDLE 0x00000002 172 #define WB_IMR_TX_NOBUF 0x00000004 173 #define WB_IMR_RX_EARLY 0x00000008 174 #define WB_IMR_RX_ERR 0x00000010 175 #define WB_IMR_TX_UNDERRUN 0x00000020 176 #define WB_IMR_RX_OK 0x00000040 177 #define WB_IMR_RX_NOBUF 0x00000080 178 #define WB_IMR_RX_IDLE 0x00000100 179 #define WB_IMR_TX_EARLY 0x00000400 180 #define WB_IMR_TIMER_EXPIRED 0x00000800 181 #define WB_IMR_BUS_ERR 0x00002000 182 #define WB_IMR_ABNORMAL 0x00008000 183 #define WB_IMR_NORMAL 0x00010000 184 185 #define WB_INTRS \ 186 (WB_IMR_RX_OK|WB_IMR_TX_OK|WB_IMR_RX_NOBUF|WB_IMR_RX_ERR| \ 187 WB_IMR_TX_NOBUF|WB_IMR_TX_UNDERRUN|WB_IMR_BUS_ERR| \ 188 WB_IMR_ABNORMAL|WB_IMR_NORMAL|WB_IMR_TX_EARLY) 189 /* 190 * Serial I/O (EEPROM/ROM) bits. 191 */ 192 #define WB_SIO_EE_CS 0x00000001 /* EEPROM chip select */ 193 #define WB_SIO_EE_CLK 0x00000002 /* EEPROM clock */ 194 #define WB_SIO_EE_DATAIN 0x00000004 /* EEPROM data output */ 195 #define WB_SIO_EE_DATAOUT 0x00000008 /* EEPROM data input */ 196 #define WB_SIO_ROMDATA4 0x00000010 197 #define WB_SIO_ROMDATA5 0x00000020 198 #define WB_SIO_ROMDATA6 0x00000040 199 #define WB_SIO_ROMDATA7 0x00000080 200 #define WB_SIO_ROMCTL_WRITE 0x00000200 201 #define WB_SIO_ROMCTL_READ 0x00000400 202 #define WB_SIO_EESEL 0x00000800 203 #define WB_SIO_MII_CLK 0x00010000 /* MDIO clock */ 204 #define WB_SIO_MII_DATAIN 0x00020000 /* MDIO data out */ 205 #define WB_SIO_MII_DIR 0x00040000 /* MDIO dir */ 206 #define WB_SIO_MII_DATAOUT 0x00080000 /* MDIO data in */ 207 208 #define WB_EECMD_WRITE 0x140 209 #define WB_EECMD_READ 0x180 210 #define WB_EECMD_ERASE 0x1c0 211 212 /* 213 * Winbond TX/RX descriptor structure. 214 */ 215 216 struct wb_desc { 217 u_int32_t wb_status; 218 u_int32_t wb_ctl; 219 u_int32_t wb_ptr1; 220 u_int32_t wb_ptr2; 221 }; 222 223 #define wb_data wb_ptr1 224 #define wb_next wb_ptr2 225 226 #define WB_RXSTAT_CRCERR 0x00000002 227 #define WB_RXSTAT_DRIBBLE 0x00000004 228 #define WB_RXSTAT_MIIERR 0x00000008 229 #define WB_RXSTAT_LATEEVENT 0x00000040 230 #define WB_RXSTAT_GIANT 0x00000080 231 #define WB_RXSTAT_LASTFRAG 0x00000100 232 #define WB_RXSTAT_FIRSTFRAG 0x00000200 233 #define WB_RXSTAT_MULTICAST 0x00000400 234 #define WB_RXSTAT_RUNT 0x00000800 235 #define WB_RXSTAT_RXTYPE 0x00003000 236 #define WB_RXSTAT_RXERR 0x00008000 237 #define WB_RXSTAT_RXLEN 0x3FFF0000 238 #define WB_RXSTAT_RXCMP 0x40000000 239 #define WB_RXSTAT_OWN 0x80000000 240 241 #define WB_RXBYTES(x) ((x & WB_RXSTAT_RXLEN) >> 16) 242 #define WB_RXSTAT (WB_RXSTAT_FIRSTFRAG|WB_RXSTAT_LASTFRAG|WB_RXSTAT_OWN) 243 244 #define WB_RXCTL_BUFLEN1 0x00000FFF 245 #define WB_RXCTL_BUFLEN2 0x00FFF000 246 #define WB_RXCTL_RLINK 0x01000000 247 #define WB_RXCTL_RLAST 0x02000000 248 249 #define WB_TXSTAT_DEFER 0x00000001 250 #define WB_TXSTAT_UNDERRUN 0x00000002 251 #define WB_TXSTAT_COLLCNT 0x00000078 252 #define WB_TXSTAT_SQE 0x00000080 253 #define WB_TXSTAT_ABORT 0x00000100 254 #define WB_TXSTAT_LATECOLL 0x00000200 255 #define WB_TXSTAT_NOCARRIER 0x00000400 256 #define WB_TXSTAT_CARRLOST 0x00000800 257 #define WB_TXSTAT_TXERR 0x00001000 258 #define WB_TXSTAT_OWN 0x80000000 259 260 #define WB_TXCTL_BUFLEN1 0x000007FF 261 #define WB_TXCTL_BUFLEN2 0x003FF800 262 #define WB_TXCTL_PAD 0x00800000 263 #define WB_TXCTL_TLINK 0x01000000 264 #define WB_TXCTL_TLAST 0x02000000 265 #define WB_TXCTL_NOCRC 0x08000000 266 #define WB_TXCTL_FIRSTFRAG 0x20000000 267 #define WB_TXCTL_LASTFRAG 0x40000000 268 #define WB_TXCTL_FINT 0x80000000 269 270 #define WB_MAXFRAGS 16 271 #define WB_RX_LIST_CNT 64 272 #define WB_TX_LIST_CNT 128 273 #define WB_MIN_FRAMELEN 60 274 #define ETHER_ALIGN 2 275 276 /* 277 * A transmit 'super descriptor' is actually WB_MAXFRAGS regular 278 * descriptors clumped together. The idea here is to emulate the 279 * multi-fragment descriptor layout found in devices such as the 280 * Texas Instruments ThunderLAN and 3Com boomerang and cylone chips. 281 * The advantage to using this scheme is that it avoids buffer copies. 282 * The disadvantage is that there's a certain amount of overhead due 283 * to the fact that each 'fragment' is 16 bytes long. In my tests, 284 * this limits top speed to about 10.5MB/sec. It should be more like 285 * 11.5MB/sec. However, the upshot is that you can achieve better 286 * results on slower machines: a Pentium 200 can pump out packets at 287 * same speed as a PII 400. 288 */ 289 struct wb_txdesc { 290 struct wb_desc wb_frag[WB_MAXFRAGS]; 291 }; 292 293 #define WB_TXNEXT(x) x->wb_ptr->wb_frag[x->wb_lastdesc].wb_next 294 #define WB_TXSTATUS(x) x->wb_ptr->wb_frag[x->wb_lastdesc].wb_status 295 #define WB_TXCTL(x) x->wb_ptr->wb_frag[x->wb_lastdesc].wb_ctl 296 #define WB_TXDATA(x) x->wb_ptr->wb_frag[x->wb_lastdesc].wb_data 297 298 #define WB_TXOWN(x) x->wb_ptr->wb_frag[0].wb_status 299 300 #define WB_UNSENT 0x1234 301 302 #define WB_BUFBYTES (1024 * sizeof(u_int32_t)) 303 304 struct wb_buf { 305 u_int32_t wb_data[1024]; 306 }; 307 308 struct wb_list_data { 309 struct wb_buf wb_rxbufs[WB_RX_LIST_CNT]; 310 struct wb_desc wb_rx_list[WB_RX_LIST_CNT]; 311 struct wb_txdesc wb_tx_list[WB_TX_LIST_CNT]; 312 }; 313 314 struct wb_chain { 315 struct wb_txdesc *wb_ptr; 316 struct mbuf *wb_mbuf; 317 struct wb_chain *wb_nextdesc; 318 u_int8_t wb_lastdesc; 319 }; 320 321 struct wb_chain_onefrag { 322 struct wb_desc *wb_ptr; 323 struct mbuf *wb_mbuf; 324 void *wb_buf; 325 struct wb_chain_onefrag *wb_nextdesc; 326 u_int8_t wb_rlast; 327 }; 328 329 struct wb_chain_data { 330 u_int8_t wb_pad[WB_MIN_FRAMELEN]; 331 struct wb_chain_onefrag wb_rx_chain[WB_RX_LIST_CNT]; 332 struct wb_chain wb_tx_chain[WB_TX_LIST_CNT]; 333 334 struct wb_chain_onefrag *wb_rx_head; 335 336 struct wb_chain *wb_tx_head; 337 struct wb_chain *wb_tx_tail; 338 struct wb_chain *wb_tx_free; 339 }; 340 341 struct wb_type { 342 u_int16_t wb_vid; 343 u_int16_t wb_did; 344 char *wb_name; 345 }; 346 347 struct wb_mii_frame { 348 u_int8_t mii_stdelim; 349 u_int8_t mii_opcode; 350 u_int8_t mii_phyaddr; 351 u_int8_t mii_regaddr; 352 u_int8_t mii_turnaround; 353 u_int16_t mii_data; 354 }; 355 356 /* 357 * MII constants 358 */ 359 #define WB_MII_STARTDELIM 0x01 360 #define WB_MII_READOP 0x02 361 #define WB_MII_WRITEOP 0x01 362 #define WB_MII_TURNAROUND 0x02 363 364 struct wb_softc { 365 struct arpcom arpcom; /* interface info */ 366 device_t wb_miibus; 367 bus_space_handle_t wb_bhandle; 368 bus_space_tag_t wb_btag; 369 struct resource *wb_res; 370 struct resource *wb_irq; 371 void *wb_intrhand; 372 struct wb_type *wb_info; /* Winbond adapter info */ 373 u_int8_t wb_unit; /* interface number */ 374 u_int8_t wb_type; 375 u_int16_t wb_txthresh; 376 int wb_cachesize; 377 caddr_t wb_ldata_ptr; 378 struct wb_list_data *wb_ldata; 379 struct wb_chain_data wb_cdata; 380 struct callout_handle wb_stat_ch; 381 }; 382 383 /* 384 * register space access macros 385 */ 386 #define CSR_WRITE_4(sc, reg, val) \ 387 bus_space_write_4(sc->wb_btag, sc->wb_bhandle, reg, val) 388 #define CSR_WRITE_2(sc, reg, val) \ 389 bus_space_write_2(sc->wb_btag, sc->wb_bhandle, reg, val) 390 #define CSR_WRITE_1(sc, reg, val) \ 391 bus_space_write_1(sc->wb_btag, sc->wb_bhandle, reg, val) 392 393 #define CSR_READ_4(sc, reg) \ 394 bus_space_read_4(sc->wb_btag, sc->wb_bhandle, reg) 395 #define CSR_READ_2(sc, reg) \ 396 bus_space_read_2(sc->wb_btag, sc->wb_bhandle, reg) 397 #define CSR_READ_1(sc, reg) \ 398 bus_space_read_1(sc->wb_btag, sc->wb_bhandle, reg) 399 400 #define WB_TIMEOUT 1000 401 402 /* 403 * General constants that are fun to know. 404 * 405 * Winbond PCI vendor ID 406 */ 407 #define WB_VENDORID 0x1050 408 409 /* 410 * Winbond device IDs. 411 */ 412 #define WB_DEVICEID_840F 0x0840 413 414 /* 415 * Compex vendor ID. 416 */ 417 #define CP_VENDORID 0x11F6 418 419 /* 420 * Compex device IDs. 421 */ 422 #define CP_DEVICEID_RL100 0x2011 423 424 /* 425 * PCI low memory base and low I/O base register, and 426 * other PCI registers. 427 */ 428 429 #define WB_PCI_VENDOR_ID 0x00 430 #define WB_PCI_DEVICE_ID 0x02 431 #define WB_PCI_COMMAND 0x04 432 #define WB_PCI_STATUS 0x06 433 #define WB_PCI_CLASSCODE 0x09 434 #define WB_PCI_CACHELEN 0x0C 435 #define WB_PCI_LATENCY_TIMER 0x0D 436 #define WB_PCI_HEADER_TYPE 0x0E 437 #define WB_PCI_LOIO 0x10 438 #define WB_PCI_LOMEM 0x14 439 #define WB_PCI_BIOSROM 0x30 440 #define WB_PCI_INTLINE 0x3C 441 #define WB_PCI_INTPIN 0x3D 442 #define WB_PCI_MINGNT 0x3E 443 #define WB_PCI_MINLAT 0x0F 444 #define WB_PCI_RESETOPT 0x48 445 #define WB_PCI_EEPROM_DATA 0x4C 446 447 /* power management registers */ 448 #define WB_PCI_CAPID 0xDC /* 8 bits */ 449 #define WB_PCI_NEXTPTR 0xDD /* 8 bits */ 450 #define WB_PCI_PWRMGMTCAP 0xDE /* 16 bits */ 451 #define WB_PCI_PWRMGMTCTRL 0xE0 /* 16 bits */ 452 453 #define WB_PSTATE_MASK 0x0003 454 #define WB_PSTATE_D0 0x0000 455 #define WB_PSTATE_D1 0x0002 456 #define WB_PSTATE_D2 0x0002 457 #define WB_PSTATE_D3 0x0003 458 #define WB_PME_EN 0x0010 459 #define WB_PME_STATUS 0x8000 460 461 #ifdef __alpha__ 462 #undef vtophys 463 #define vtophys(va) alpha_XXX_dmamap((vm_offset_t)va) 464 #endif 465