1 /*- 2 * Copyright (c) 2001 Michael Smith 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 17 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 18 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 20 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 21 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 22 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 23 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 24 * SUCH DAMAGE. 25 * 26 * $FreeBSD: src/sys/dev/ciss/cissvar.h,v 1.17 2010/03/03 17:58:41 mav Exp $ 27 */ 28 29 /* 30 * CISS adapter driver datastructures 31 */ 32 33 typedef STAILQ_HEAD(, ciss_request) cr_qhead_t; 34 35 /************************************************************************ 36 * Tunable parameters 37 */ 38 39 /* 40 * There is no guaranteed upper bound on the number of concurrent 41 * commands an adapter may claim to support. Cap it at a reasonable 42 * value. 43 */ 44 #define CISS_MAX_REQUESTS 1024 45 46 /* 47 * Maximum number of logical drives we support. 48 */ 49 #define CISS_MAX_LOGICAL 15 50 51 /* 52 * Maximum number of physical devices we support. 53 */ 54 #define CISS_MAX_PHYSICAL 1024 55 56 /* 57 * Interrupt reduction can be controlled by tuning the interrupt 58 * coalesce delay and count paramters. The delay (in microseconds) 59 * defers delivery of interrupts to increase the chance of there being 60 * more than one completed command ready when the interrupt is 61 * delivered. The count expedites the delivery of the interrupt when 62 * the given number of commands are ready. 63 * 64 * If the delay is set to 0, interrupts are delivered immediately. 65 */ 66 #define CISS_INTERRUPT_COALESCE_DELAY 0 67 #define CISS_INTERRUPT_COALESCE_COUNT 16 68 69 /* 70 * Heartbeat routine timeout in seconds. Note that since event 71 * handling is performed on a callback basis, we don't need this to 72 * run very often. 73 */ 74 #define CISS_HEARTBEAT_RATE 10 75 76 /************************************************************************ 77 * Driver version. Only really significant to the ACU interface. 78 */ 79 #define CISS_DRIVER_VERSION 20011201 80 81 /************************************************************************ 82 * Driver data structures 83 */ 84 85 /* 86 * Each command issued to the adapter is managed by a request 87 * structure. 88 */ 89 struct ciss_request 90 { 91 STAILQ_ENTRY(ciss_request) cr_link; 92 int cr_onq; /* which queue we are on */ 93 94 struct ciss_softc *cr_sc; /* controller softc */ 95 void *cr_data; /* data buffer */ 96 u_int32_t cr_length; /* data length */ 97 bus_dmamap_t cr_datamap; /* DMA map for data */ 98 struct ciss_command *cr_cc; 99 uint32_t cr_ccphys; 100 int cr_tag; 101 int cr_flags; 102 #define CISS_REQ_MAPPED (1<<0) /* data mapped */ 103 #define CISS_REQ_SLEEP (1<<1) /* submitter sleeping */ 104 #define CISS_REQ_POLL (1<<2) /* submitter polling */ 105 #define CISS_REQ_DATAOUT (1<<3) /* data host->adapter */ 106 #define CISS_REQ_DATAIN (1<<4) /* data adapter->host */ 107 #define CISS_REQ_BUSY (1<<5) /* controller has req */ 108 109 void (* cr_complete)(struct ciss_request *); 110 void *cr_private; 111 int cr_sg_tag; 112 #define CISS_SG_MAX ((CISS_SG_FETCH_MAX << 1) | 0x1) 113 #define CISS_SG_1 ((CISS_SG_FETCH_1 << 1) | 0x01) 114 #define CISS_SG_2 ((CISS_SG_FETCH_2 << 1) | 0x01) 115 #define CISS_SG_4 ((CISS_SG_FETCH_4 << 1) | 0x01) 116 #define CISS_SG_8 ((CISS_SG_FETCH_8 << 1) | 0x01) 117 #define CISS_SG_16 ((CISS_SG_FETCH_16 << 1) | 0x01) 118 #define CISS_SG_32 ((CISS_SG_FETCH_32 << 1) | 0x01) 119 #define CISS_SG_NONE ((CISS_SG_FETCH_NONE << 1) | 0x01) 120 }; 121 122 /* 123 * The adapter command structure is defined with a zero-length 124 * scatter/gather list size. In practise, we want space for a 125 * scatter-gather list, and we also want to avoid having commands 126 * cross page boundaries. 127 * 128 * The size of the ciss_command is 52 bytes. 65 s/g elements are reserved 129 * to allow a max i/o size of 256k. This gives a total command size of 130 * 1120 bytes, including the 32 byte alignment padding. Modern controllers 131 * seem to saturate nicely at this value. 132 */ 133 134 #define CISS_MAX_SG_ELEMENTS 65 135 #define CISS_COMMAND_ALIGN 32 136 #define CISS_COMMAND_SG_LENGTH (sizeof(struct ciss_sg_entry) * CISS_MAX_SG_ELEMENTS) 137 #define CISS_COMMAND_ALLOC_SIZE (roundup2(sizeof(struct ciss_command) + CISS_COMMAND_SG_LENGTH, CISS_COMMAND_ALIGN)) 138 139 /* 140 * Per-logical-drive data. 141 */ 142 struct ciss_ldrive 143 { 144 union ciss_device_address cl_address; 145 union ciss_device_address *cl_controller; 146 int cl_status; 147 #define CISS_LD_NONEXISTENT 0 148 #define CISS_LD_ONLINE 1 149 #define CISS_LD_OFFLINE 2 150 151 int cl_update; 152 153 struct ciss_bmic_id_ldrive *cl_ldrive; 154 struct ciss_bmic_id_lstatus *cl_lstatus; 155 struct ciss_ldrive_geometry cl_geometry; 156 157 char cl_name[16]; /* device name */ 158 }; 159 160 /* 161 * Per-physical-drive data 162 */ 163 struct ciss_pdrive 164 { 165 union ciss_device_address cp_address; 166 int cp_online; 167 }; 168 169 #define CISS_PHYSICAL_SHIFT 5 170 #define CISS_PHYSICAL_BASE (1 << CISS_PHYSICAL_SHIFT) 171 #define CISS_MAX_PHYSTGT 256 172 173 #define CISS_IS_PHYSICAL(bus) (bus >= CISS_PHYSICAL_BASE) 174 #define CISS_CAM_TO_PBUS(bus) (bus - CISS_PHYSICAL_BASE) 175 176 /* 177 * Per-adapter data 178 */ 179 struct ciss_softc 180 { 181 /* bus connections */ 182 device_t ciss_dev; /* bus attachment */ 183 struct cdev *ciss_dev_t; /* control device */ 184 185 struct resource *ciss_regs_resource; /* register interface window */ 186 int ciss_regs_rid; /* resource ID */ 187 bus_space_handle_t ciss_regs_bhandle; /* bus space handle */ 188 bus_space_tag_t ciss_regs_btag; /* bus space tag */ 189 190 struct resource *ciss_cfg_resource; /* config struct interface window */ 191 int ciss_cfg_rid; /* resource ID */ 192 struct ciss_config_table *ciss_cfg; /* config table in adapter memory */ 193 struct ciss_perf_config *ciss_perf; /* config table for the performant */ 194 struct ciss_bmic_id_table *ciss_id; /* ID table in host memory */ 195 u_int32_t ciss_heartbeat; /* last heartbeat value */ 196 int ciss_heart_attack; /* number of times we have seen this value */ 197 198 int ciss_msi; 199 struct resource *ciss_irq_resource; /* interrupt */ 200 int ciss_irq_rid[CISS_MSI_COUNT]; /* resource ID */ 201 void *ciss_intr; /* interrupt handle */ 202 int ciss_irq_type; 203 204 bus_dma_tag_t ciss_parent_dmat; /* parent DMA tag */ 205 bus_dma_tag_t ciss_buffer_dmat; /* data buffer/command DMA tag */ 206 207 u_int32_t ciss_interrupt_mask; /* controller interrupt mask bits */ 208 209 uint64_t *ciss_reply; 210 int ciss_cycle; 211 int ciss_rqidx; 212 bus_dma_tag_t ciss_reply_dmat; 213 bus_dmamap_t ciss_reply_map; 214 uint32_t ciss_reply_phys; 215 216 int ciss_max_requests; 217 struct ciss_request ciss_request[CISS_MAX_REQUESTS]; /* requests */ 218 void *ciss_command; /* command structures */ 219 bus_dma_tag_t ciss_command_dmat; /* command DMA tag */ 220 bus_dmamap_t ciss_command_map; /* command DMA map */ 221 u_int32_t ciss_command_phys; /* command array base address */ 222 cr_qhead_t ciss_free; /* requests available for reuse */ 223 cr_qhead_t ciss_notify; /* requests which are defered for processing */ 224 struct thread *ciss_notify_thread; 225 226 struct callout ciss_periodic; /* periodic event handling */ 227 struct ciss_request *ciss_periodic_notify; /* notify callback request */ 228 229 struct lock ciss_lock; 230 struct ciss_ldrive **ciss_logical; 231 struct ciss_pdrive **ciss_physical; 232 union ciss_device_address *ciss_controllers; /* controller address */ 233 int ciss_max_bus_number; /* maximum bus number */ 234 int ciss_max_logical_bus; 235 int ciss_max_physical_bus; 236 237 struct cam_devq *ciss_cam_devq; 238 struct cam_sim **ciss_cam_sim; 239 240 int ciss_soft_reset; 241 242 struct sysctl_ctx_list ciss_sysctl_ctx; 243 struct sysctl_oid *ciss_sysctl_tree; 244 245 int ciss_flags; 246 #define CISS_FLAG_NOTIFY_OK (1<<0) /* notify command running OK */ 247 #define CISS_FLAG_CONTROL_OPEN (1<<1) /* control device is open */ 248 #define CISS_FLAG_ABORTING (1<<2) /* driver is going away */ 249 #define CISS_FLAG_RUNNING (1<<3) /* driver is running (interrupts usable) */ 250 #define CISS_FLAG_BUSY (1<<4) /* no free commands */ 251 252 #define CISS_FLAG_FAKE_SYNCH (1<<16) /* needs SYNCHRONISE_CACHE faked */ 253 #define CISS_FLAG_BMIC_ABORT (1<<17) /* use BMIC command to abort Notify on Event */ 254 #define CISS_FLAG_THREAD_SHUT (1<<20) /* shutdown the kthread */ 255 256 struct ciss_qstat ciss_qstat[CISSQ_COUNT]; /* queue statistics */ 257 }; 258 259 /************************************************************************ 260 * Debugging/diagnostic output. 261 */ 262 263 /* 264 * Debugging levels: 265 * 0 - quiet, only emit warnings 266 * 1 - talkative, log major events, but nothing on the I/O path 267 * 2 - noisy, log events on the I/O path 268 * 3 - extremely noisy, log items in loops 269 */ 270 #ifdef CISS_DEBUG 271 # define debug(level, fmt, args...) \ 272 do { \ 273 if (level <= CISS_DEBUG) kprintf("%s: " fmt "\n", __func__ , ##args); \ 274 } while(0) 275 # define debug_called(level) \ 276 do { \ 277 if (level <= CISS_DEBUG) kprintf("%s: called\n", __func__); \ 278 } while(0) 279 # define debug_struct(s) kprintf(" SIZE %s: %zu\n", #s, sizeof(struct s)) 280 # define debug_union(s) kprintf(" SIZE %s: %zu\n", #s, sizeof(union s)) 281 # define debug_type(s) kprintf(" SIZE %s: %zu\n", #s, sizeof(s)) 282 # define debug_field(s, f) kprintf(" OFFSET %s.%s: %d\n", #s, #f, ((int)&(((struct s *)0)->f))) 283 # define debug_const(c) kprintf(" CONST %s %jd/0x%jx\n", #c, (intmax_t)c, (intmax_t)c); 284 #else 285 # define debug(level, fmt, args...) 286 # define debug_called(level) 287 # define debug_struct(s) 288 # define debug_union(s) 289 # define debug_type(s) 290 # define debug_field(s, f) 291 # define debug_const(c) 292 #endif 293 294 #define ciss_printf(sc, fmt, args...) device_printf(sc->ciss_dev, fmt , ##args) 295 296 /************************************************************************ 297 * Queue primitives 298 */ 299 300 #define CISSQ_ADD(sc, qname) \ 301 do { \ 302 struct ciss_qstat *qs = &(sc)->ciss_qstat[qname]; \ 303 \ 304 qs->q_length++; \ 305 if (qs->q_length > qs->q_max) \ 306 qs->q_max = qs->q_length; \ 307 } while(0) 308 309 #define CISSQ_REMOVE(sc, qname) (sc)->ciss_qstat[qname].q_length-- 310 #define CISSQ_INIT(sc, qname) \ 311 do { \ 312 sc->ciss_qstat[qname].q_length = 0; \ 313 sc->ciss_qstat[qname].q_max = 0; \ 314 } while(0) 315 316 317 #define CISSQ_REQUEST_QUEUE(name, index) \ 318 static __inline void \ 319 ciss_initq_ ## name (struct ciss_softc *sc) \ 320 { \ 321 STAILQ_INIT(&sc->ciss_ ## name); \ 322 CISSQ_INIT(sc, index); \ 323 } \ 324 static __inline void \ 325 ciss_enqueue_ ## name (struct ciss_request *cr) \ 326 { \ 327 \ 328 STAILQ_INSERT_TAIL(&cr->cr_sc->ciss_ ## name, cr, cr_link); \ 329 CISSQ_ADD(cr->cr_sc, index); \ 330 cr->cr_onq = index; \ 331 } \ 332 static __inline void \ 333 ciss_requeue_ ## name (struct ciss_request *cr) \ 334 { \ 335 \ 336 STAILQ_INSERT_HEAD(&cr->cr_sc->ciss_ ## name, cr, cr_link); \ 337 CISSQ_ADD(cr->cr_sc, index); \ 338 cr->cr_onq = index; \ 339 } \ 340 static __inline struct ciss_request * \ 341 ciss_dequeue_ ## name (struct ciss_softc *sc) \ 342 { \ 343 struct ciss_request *cr; \ 344 \ 345 if ((cr = STAILQ_FIRST(&sc->ciss_ ## name)) != NULL) { \ 346 STAILQ_REMOVE_HEAD(&sc->ciss_ ## name, cr_link); \ 347 CISSQ_REMOVE(sc, index); \ 348 cr->cr_onq = -1; \ 349 } \ 350 return(cr); \ 351 } \ 352 struct hack 353 354 CISSQ_REQUEST_QUEUE(free, CISSQ_FREE); 355 CISSQ_REQUEST_QUEUE(notify, CISSQ_NOTIFY); 356 357 static __inline void 358 ciss_enqueue_complete(struct ciss_request *ac, cr_qhead_t *head) 359 { 360 361 STAILQ_INSERT_TAIL(head, ac, cr_link); 362 } 363 364 static __inline struct ciss_request * 365 ciss_dequeue_complete(struct ciss_softc *sc, cr_qhead_t *head) 366 { 367 struct ciss_request *ac; 368 369 if ((ac = STAILQ_FIRST(head)) != NULL) 370 STAILQ_REMOVE_HEAD(head, cr_link); 371 return(ac); 372 } 373 374 /******************************************************************************** 375 * space-fill a character string 376 */ 377 static __inline void 378 padstr(char *targ, const char *src, int len) 379 { 380 while (len-- > 0) { 381 if (*src != 0) { 382 *targ++ = *src++; 383 } else { 384 *targ++ = ' '; 385 } 386 } 387 } 388 389 #define ciss_report_request(a, b, c) \ 390 _ciss_report_request(a, b, c, __func__) 391