1 /*- 2 * Copyright (c) 2012-2015 LSI Corp. 3 * Copyright (c) 2013-2016 Avago Technologies 4 * All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 3. Neither the name of the author nor the names of any co-contributors 15 * may be used to endorse or promote products derived from this software 16 * without specific prior written permission. 17 * 18 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 19 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 21 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 22 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 23 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 24 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 25 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 26 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 27 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 28 * SUCH DAMAGE. 29 * 30 * Avago Technologies (LSI) MPT-Fusion Host Adapter FreeBSD 31 * 32 * $FreeBSD: head/sys/dev/mpr/mpi/mpi2_sas.h 299263 2016-05-09 16:12:32Z slm $ 33 */ 34 35 /* 36 * Copyright (c) 2000-2015 LSI Corporation. 37 * Copyright (c) 2013-2016 Avago Technologies 38 * All rights reserved. 39 * 40 * 41 * Name: mpi2_sas.h 42 * Title: MPI Serial Attached SCSI structures and definitions 43 * Creation Date: February 9, 2007 44 * 45 * mpi2_sas.h Version: 02.00.10 46 * 47 * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25 48 * prefix are for use only on MPI v2.5 products, and must not be used 49 * with MPI v2.0 products. Unless otherwise noted, names beginning with 50 * MPI2 or Mpi2 are for use with both MPI v2.0 and MPI v2.5 products. 51 * 52 * Version History 53 * --------------- 54 * 55 * Date Version Description 56 * -------- -------- ------------------------------------------------------ 57 * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. 58 * 06-26-07 02.00.01 Added Clear All Persistent Operation to SAS IO Unit 59 * Control Request. 60 * 10-02-08 02.00.02 Added Set IOC Parameter Operation to SAS IO Unit Control 61 * Request. 62 * 10-28-09 02.00.03 Changed the type of SGL in MPI2_SATA_PASSTHROUGH_REQUEST 63 * to MPI2_SGE_IO_UNION since it supports chained SGLs. 64 * 05-12-10 02.00.04 Modified some comments. 65 * 08-11-10 02.00.05 Added NCQ operations to SAS IO Unit Control. 66 * 11-18-11 02.00.06 Incorporating additions for MPI v2.5. 67 * 07-10-12 02.00.07 Added MPI2_SATA_PT_SGE_UNION for use in the SATA 68 * Passthrough Request message. 69 * 08-19-13 02.00.08 Made MPI2_SAS_OP_TRANSMIT_PORT_SELECT_SIGNAL obsolete 70 * for anything newer than MPI v2.0. 71 * 11-18-14 02.00.09 Updated copyright information. 72 * 03-16-15 02.00.10 Updated for MPI v2.6. 73 * Added MPI2_SATA_PT_REQ_PT_FLAGS_FPDMA. 74 * -------------------------------------------------------------------------- 75 */ 76 77 #ifndef MPI2_SAS_H 78 #define MPI2_SAS_H 79 80 /* 81 * Values for SASStatus. 82 */ 83 #define MPI2_SASSTATUS_SUCCESS (0x00) 84 #define MPI2_SASSTATUS_UNKNOWN_ERROR (0x01) 85 #define MPI2_SASSTATUS_INVALID_FRAME (0x02) 86 #define MPI2_SASSTATUS_UTC_BAD_DEST (0x03) 87 #define MPI2_SASSTATUS_UTC_BREAK_RECEIVED (0x04) 88 #define MPI2_SASSTATUS_UTC_CONNECT_RATE_NOT_SUPPORTED (0x05) 89 #define MPI2_SASSTATUS_UTC_PORT_LAYER_REQUEST (0x06) 90 #define MPI2_SASSTATUS_UTC_PROTOCOL_NOT_SUPPORTED (0x07) 91 #define MPI2_SASSTATUS_UTC_STP_RESOURCES_BUSY (0x08) 92 #define MPI2_SASSTATUS_UTC_WRONG_DESTINATION (0x09) 93 #define MPI2_SASSTATUS_SHORT_INFORMATION_UNIT (0x0A) 94 #define MPI2_SASSTATUS_LONG_INFORMATION_UNIT (0x0B) 95 #define MPI2_SASSTATUS_XFER_RDY_INCORRECT_WRITE_DATA (0x0C) 96 #define MPI2_SASSTATUS_XFER_RDY_REQUEST_OFFSET_ERROR (0x0D) 97 #define MPI2_SASSTATUS_XFER_RDY_NOT_EXPECTED (0x0E) 98 #define MPI2_SASSTATUS_DATA_INCORRECT_DATA_LENGTH (0x0F) 99 #define MPI2_SASSTATUS_DATA_TOO_MUCH_READ_DATA (0x10) 100 #define MPI2_SASSTATUS_DATA_OFFSET_ERROR (0x11) 101 #define MPI2_SASSTATUS_SDSF_NAK_RECEIVED (0x12) 102 #define MPI2_SASSTATUS_SDSF_CONNECTION_FAILED (0x13) 103 #define MPI2_SASSTATUS_INITIATOR_RESPONSE_TIMEOUT (0x14) 104 105 106 /* 107 * Values for the SAS DeviceInfo field used in SAS Device Status Change Event 108 * data and SAS Configuration pages. 109 */ 110 #define MPI2_SAS_DEVICE_INFO_SEP (0x00004000) 111 #define MPI2_SAS_DEVICE_INFO_ATAPI_DEVICE (0x00002000) 112 #define MPI2_SAS_DEVICE_INFO_LSI_DEVICE (0x00001000) 113 #define MPI2_SAS_DEVICE_INFO_DIRECT_ATTACH (0x00000800) 114 #define MPI2_SAS_DEVICE_INFO_SSP_TARGET (0x00000400) 115 #define MPI2_SAS_DEVICE_INFO_STP_TARGET (0x00000200) 116 #define MPI2_SAS_DEVICE_INFO_SMP_TARGET (0x00000100) 117 #define MPI2_SAS_DEVICE_INFO_SATA_DEVICE (0x00000080) 118 #define MPI2_SAS_DEVICE_INFO_SSP_INITIATOR (0x00000040) 119 #define MPI2_SAS_DEVICE_INFO_STP_INITIATOR (0x00000020) 120 #define MPI2_SAS_DEVICE_INFO_SMP_INITIATOR (0x00000010) 121 #define MPI2_SAS_DEVICE_INFO_SATA_HOST (0x00000008) 122 123 #define MPI2_SAS_DEVICE_INFO_MASK_DEVICE_TYPE (0x00000007) 124 #define MPI2_SAS_DEVICE_INFO_NO_DEVICE (0x00000000) 125 #define MPI2_SAS_DEVICE_INFO_END_DEVICE (0x00000001) 126 #define MPI2_SAS_DEVICE_INFO_EDGE_EXPANDER (0x00000002) 127 #define MPI2_SAS_DEVICE_INFO_FANOUT_EXPANDER (0x00000003) 128 129 130 /***************************************************************************** 131 * 132 * SAS Messages 133 * 134 *****************************************************************************/ 135 136 /**************************************************************************** 137 * SMP Passthrough messages 138 ****************************************************************************/ 139 140 /* SMP Passthrough Request Message */ 141 typedef struct _MPI2_SMP_PASSTHROUGH_REQUEST 142 { 143 U8 PassthroughFlags; /* 0x00 */ 144 U8 PhysicalPort; /* 0x01 */ 145 U8 ChainOffset; /* 0x02 */ 146 U8 Function; /* 0x03 */ 147 U16 RequestDataLength; /* 0x04 */ 148 U8 SGLFlags; /* 0x06 */ /* MPI v2.0 only. Reserved on MPI v2.5. */ 149 U8 MsgFlags; /* 0x07 */ 150 U8 VP_ID; /* 0x08 */ 151 U8 VF_ID; /* 0x09 */ 152 U16 Reserved1; /* 0x0A */ 153 U32 Reserved2; /* 0x0C */ 154 U64 SASAddress; /* 0x10 */ 155 U32 Reserved3; /* 0x18 */ 156 U32 Reserved4; /* 0x1C */ 157 MPI2_SIMPLE_SGE_UNION SGL; /* 0x20 */ /* MPI v2.5: IEEE Simple 64 elements only */ 158 } MPI2_SMP_PASSTHROUGH_REQUEST, MPI2_POINTER PTR_MPI2_SMP_PASSTHROUGH_REQUEST, 159 Mpi2SmpPassthroughRequest_t, MPI2_POINTER pMpi2SmpPassthroughRequest_t; 160 161 /* values for PassthroughFlags field */ 162 #define MPI2_SMP_PT_REQ_PT_FLAGS_IMMEDIATE (0x80) 163 164 /* MPI v2.0: use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */ 165 166 167 /* SMP Passthrough Reply Message */ 168 typedef struct _MPI2_SMP_PASSTHROUGH_REPLY 169 { 170 U8 PassthroughFlags; /* 0x00 */ 171 U8 PhysicalPort; /* 0x01 */ 172 U8 MsgLength; /* 0x02 */ 173 U8 Function; /* 0x03 */ 174 U16 ResponseDataLength; /* 0x04 */ 175 U8 SGLFlags; /* 0x06 */ 176 U8 MsgFlags; /* 0x07 */ 177 U8 VP_ID; /* 0x08 */ 178 U8 VF_ID; /* 0x09 */ 179 U16 Reserved1; /* 0x0A */ 180 U8 Reserved2; /* 0x0C */ 181 U8 SASStatus; /* 0x0D */ 182 U16 IOCStatus; /* 0x0E */ 183 U32 IOCLogInfo; /* 0x10 */ 184 U32 Reserved3; /* 0x14 */ 185 U8 ResponseData[4]; /* 0x18 */ 186 } MPI2_SMP_PASSTHROUGH_REPLY, MPI2_POINTER PTR_MPI2_SMP_PASSTHROUGH_REPLY, 187 Mpi2SmpPassthroughReply_t, MPI2_POINTER pMpi2SmpPassthroughReply_t; 188 189 /* values for PassthroughFlags field */ 190 #define MPI2_SMP_PT_REPLY_PT_FLAGS_IMMEDIATE (0x80) 191 192 /* values for SASStatus field are at the top of this file */ 193 194 195 /**************************************************************************** 196 * SATA Passthrough messages 197 ****************************************************************************/ 198 199 typedef union _MPI2_SATA_PT_SGE_UNION 200 { 201 MPI2_SGE_SIMPLE_UNION MpiSimple; /* MPI v2.0 only */ 202 MPI2_SGE_CHAIN_UNION MpiChain; /* MPI v2.0 only */ 203 MPI2_IEEE_SGE_SIMPLE_UNION IeeeSimple; 204 MPI2_IEEE_SGE_CHAIN_UNION IeeeChain; /* MPI v2.0 only */ 205 MPI25_IEEE_SGE_CHAIN64 IeeeChain64; /* MPI v2.5 only */ 206 } MPI2_SATA_PT_SGE_UNION, MPI2_POINTER PTR_MPI2_SATA_PT_SGE_UNION, 207 Mpi2SataPTSGEUnion_t, MPI2_POINTER pMpi2SataPTSGEUnion_t; 208 209 210 /* SATA Passthrough Request Message */ 211 typedef struct _MPI2_SATA_PASSTHROUGH_REQUEST 212 { 213 U16 DevHandle; /* 0x00 */ 214 U8 ChainOffset; /* 0x02 */ 215 U8 Function; /* 0x03 */ 216 U16 PassthroughFlags; /* 0x04 */ 217 U8 SGLFlags; /* 0x06 */ /* MPI v2.0 only. Reserved on MPI v2.5. */ 218 U8 MsgFlags; /* 0x07 */ 219 U8 VP_ID; /* 0x08 */ 220 U8 VF_ID; /* 0x09 */ 221 U16 Reserved1; /* 0x0A */ 222 U32 Reserved2; /* 0x0C */ 223 U32 Reserved3; /* 0x10 */ 224 U32 Reserved4; /* 0x14 */ 225 U32 DataLength; /* 0x18 */ 226 U8 CommandFIS[20]; /* 0x1C */ 227 MPI2_SATA_PT_SGE_UNION SGL; /* 0x30 */ /* MPI v2.5: IEEE 64 elements only */ 228 } MPI2_SATA_PASSTHROUGH_REQUEST, MPI2_POINTER PTR_MPI2_SATA_PASSTHROUGH_REQUEST, 229 Mpi2SataPassthroughRequest_t, MPI2_POINTER pMpi2SataPassthroughRequest_t; 230 231 /* values for PassthroughFlags field */ 232 #define MPI2_SATA_PT_REQ_PT_FLAGS_EXECUTE_DIAG (0x0100) 233 #define MPI2_SATA_PT_REQ_PT_FLAGS_FPDMA (0x0040) /* MPI v2.6 and newer */ 234 #define MPI2_SATA_PT_REQ_PT_FLAGS_DMA (0x0020) 235 #define MPI2_SATA_PT_REQ_PT_FLAGS_PIO (0x0010) 236 #define MPI2_SATA_PT_REQ_PT_FLAGS_UNSPECIFIED_VU (0x0004) 237 #define MPI2_SATA_PT_REQ_PT_FLAGS_WRITE (0x0002) 238 #define MPI2_SATA_PT_REQ_PT_FLAGS_READ (0x0001) 239 240 /* MPI v2.0: use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */ 241 242 243 /* SATA Passthrough Reply Message */ 244 typedef struct _MPI2_SATA_PASSTHROUGH_REPLY 245 { 246 U16 DevHandle; /* 0x00 */ 247 U8 MsgLength; /* 0x02 */ 248 U8 Function; /* 0x03 */ 249 U16 PassthroughFlags; /* 0x04 */ 250 U8 SGLFlags; /* 0x06 */ 251 U8 MsgFlags; /* 0x07 */ 252 U8 VP_ID; /* 0x08 */ 253 U8 VF_ID; /* 0x09 */ 254 U16 Reserved1; /* 0x0A */ 255 U8 Reserved2; /* 0x0C */ 256 U8 SASStatus; /* 0x0D */ 257 U16 IOCStatus; /* 0x0E */ 258 U32 IOCLogInfo; /* 0x10 */ 259 U8 StatusFIS[20]; /* 0x14 */ 260 U32 StatusControlRegisters; /* 0x28 */ 261 U32 TransferCount; /* 0x2C */ 262 } MPI2_SATA_PASSTHROUGH_REPLY, MPI2_POINTER PTR_MPI2_SATA_PASSTHROUGH_REPLY, 263 Mpi2SataPassthroughReply_t, MPI2_POINTER pMpi2SataPassthroughReply_t; 264 265 /* values for SASStatus field are at the top of this file */ 266 267 268 /**************************************************************************** 269 * SAS IO Unit Control messages 270 * (MPI v2.5 and earlier only. 271 * Replaced by IO Unit Control messages in MPI v2.6 and later.) 272 ****************************************************************************/ 273 274 /* SAS IO Unit Control Request Message */ 275 typedef struct _MPI2_SAS_IOUNIT_CONTROL_REQUEST 276 { 277 U8 Operation; /* 0x00 */ 278 U8 Reserved1; /* 0x01 */ 279 U8 ChainOffset; /* 0x02 */ 280 U8 Function; /* 0x03 */ 281 U16 DevHandle; /* 0x04 */ 282 U8 IOCParameter; /* 0x06 */ 283 U8 MsgFlags; /* 0x07 */ 284 U8 VP_ID; /* 0x08 */ 285 U8 VF_ID; /* 0x09 */ 286 U16 Reserved3; /* 0x0A */ 287 U16 Reserved4; /* 0x0C */ 288 U8 PhyNum; /* 0x0E */ 289 U8 PrimFlags; /* 0x0F */ 290 U32 Primitive; /* 0x10 */ 291 U8 LookupMethod; /* 0x14 */ 292 U8 Reserved5; /* 0x15 */ 293 U16 SlotNumber; /* 0x16 */ 294 U64 LookupAddress; /* 0x18 */ 295 U32 IOCParameterValue; /* 0x20 */ 296 U32 Reserved7; /* 0x24 */ 297 U32 Reserved8; /* 0x28 */ 298 } MPI2_SAS_IOUNIT_CONTROL_REQUEST, 299 MPI2_POINTER PTR_MPI2_SAS_IOUNIT_CONTROL_REQUEST, 300 Mpi2SasIoUnitControlRequest_t, MPI2_POINTER pMpi2SasIoUnitControlRequest_t; 301 302 /* values for the Operation field */ 303 #define MPI2_SAS_OP_CLEAR_ALL_PERSISTENT (0x02) 304 #define MPI2_SAS_OP_PHY_LINK_RESET (0x06) 305 #define MPI2_SAS_OP_PHY_HARD_RESET (0x07) 306 #define MPI2_SAS_OP_PHY_CLEAR_ERROR_LOG (0x08) 307 #define MPI2_SAS_OP_SEND_PRIMITIVE (0x0A) 308 #define MPI2_SAS_OP_FORCE_FULL_DISCOVERY (0x0B) 309 #define MPI2_SAS_OP_TRANSMIT_PORT_SELECT_SIGNAL (0x0C) /* MPI v2.0 only */ 310 #define MPI2_SAS_OP_REMOVE_DEVICE (0x0D) 311 #define MPI2_SAS_OP_LOOKUP_MAPPING (0x0E) 312 #define MPI2_SAS_OP_SET_IOC_PARAMETER (0x0F) 313 #define MPI25_SAS_OP_ENABLE_FP_DEVICE (0x10) 314 #define MPI25_SAS_OP_DISABLE_FP_DEVICE (0x11) 315 #define MPI25_SAS_OP_ENABLE_FP_ALL (0x12) 316 #define MPI25_SAS_OP_DISABLE_FP_ALL (0x13) 317 #define MPI2_SAS_OP_DEV_ENABLE_NCQ (0x14) 318 #define MPI2_SAS_OP_DEV_DISABLE_NCQ (0x15) 319 #define MPI2_SAS_OP_PRODUCT_SPECIFIC_MIN (0x80) 320 321 /* values for the PrimFlags field */ 322 #define MPI2_SAS_PRIMFLAGS_SINGLE (0x08) 323 #define MPI2_SAS_PRIMFLAGS_TRIPLE (0x02) 324 #define MPI2_SAS_PRIMFLAGS_REDUNDANT (0x01) 325 326 /* values for the LookupMethod field */ 327 #define MPI2_SAS_LOOKUP_METHOD_SAS_ADDRESS (0x01) 328 #define MPI2_SAS_LOOKUP_METHOD_SAS_ENCLOSURE_SLOT (0x02) 329 #define MPI2_SAS_LOOKUP_METHOD_SAS_DEVICE_NAME (0x03) 330 331 332 /* SAS IO Unit Control Reply Message */ 333 typedef struct _MPI2_SAS_IOUNIT_CONTROL_REPLY 334 { 335 U8 Operation; /* 0x00 */ 336 U8 Reserved1; /* 0x01 */ 337 U8 MsgLength; /* 0x02 */ 338 U8 Function; /* 0x03 */ 339 U16 DevHandle; /* 0x04 */ 340 U8 IOCParameter; /* 0x06 */ 341 U8 MsgFlags; /* 0x07 */ 342 U8 VP_ID; /* 0x08 */ 343 U8 VF_ID; /* 0x09 */ 344 U16 Reserved3; /* 0x0A */ 345 U16 Reserved4; /* 0x0C */ 346 U16 IOCStatus; /* 0x0E */ 347 U32 IOCLogInfo; /* 0x10 */ 348 } MPI2_SAS_IOUNIT_CONTROL_REPLY, 349 MPI2_POINTER PTR_MPI2_SAS_IOUNIT_CONTROL_REPLY, 350 Mpi2SasIoUnitControlReply_t, MPI2_POINTER pMpi2SasIoUnitControlReply_t; 351 352 353 #endif 354 355 356