1 /* 2 * Copyright (c) 2003,2004,2008 The DragonFly Project. All rights reserved. 3 * 4 * This code is derived from software contributed to The DragonFly Project 5 * by Matthew Dillon <dillon@backplane.com> 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 11 * 1. Redistributions of source code must retain the above copyright 12 * notice, this list of conditions and the following disclaimer. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in 15 * the documentation and/or other materials provided with the 16 * distribution. 17 * 3. Neither the name of The DragonFly Project nor the names of its 18 * contributors may be used to endorse or promote products derived 19 * from this software without specific, prior written permission. 20 * 21 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 22 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 23 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS 24 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE 25 * COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, 26 * INCIDENTAL, SPECIAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES (INCLUDING, 27 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 28 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED 29 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 30 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT 31 * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 32 * SUCH DAMAGE. 33 * 34 * Copyright (c) 1996, by Peter Wemm and Steve Passe, All rights reserved. 35 * 36 * Redistribution and use in source and binary forms, with or without 37 * modification, are permitted provided that the following conditions 38 * are met: 39 * 1. Redistributions of source code must retain the above copyright 40 * notice, this list of conditions and the following disclaimer. 41 * 2. The name of the developer may NOT be used to endorse or promote products 42 * derived from this software without specific prior written permission. 43 * 44 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 45 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 46 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 47 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 48 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 49 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 50 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 51 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 52 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 53 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 54 * SUCH DAMAGE. 55 * 56 * $FreeBSD: src/sys/i386/include/apic.h,v 1.14.2.2 2003/03/21 21:46:15 jhb Exp $ 57 * $DragonFly: src/sys/platform/pc64/apic/apicreg.h,v 1.1 2008/08/29 17:07:12 dillon Exp $ 58 */ 59 60 #ifndef _MACHINE_APICREG_H_ 61 #define _MACHINE_APICREG_H_ 62 63 /* 64 * Local && I/O APIC definitions for Pentium P54C+ Built-in APIC. 65 * 66 * A per-cpu APIC resides in memory location 0xFEE00000. 67 * 68 * 31 ... 24 23 ... 16 15 ... 8 7 ... 0 69 * +-----------+-----------+-----------+-----------+ 70 * 0000 | | | | | 71 * 0010 | | | | | 72 * +-----------+-----------+-----------+-----------+ 73 * 74 * +-----------+-----------+-----------+-----------+ 75 * 0020 ID | | ID | | | | RW 76 * +-----------+-----------+-----------+-----------+ 77 * 78 * The physical APIC ID is used with physical interrupt 79 * delivery modes. 80 * 81 * +-----------+-----------+-----------+-----------+ 82 * 0030 VER | | | | | 83 * +-----------+-----------+-----------+-----------+ 84 * 0040 | | | | | 85 * 0050 | | | | | 86 * 0060 | | | | | 87 * 0070 | | | | | 88 * +-----------+-----------+-----------+-----------+ 89 * 0080 TPR | | | | PRIO SUBC | 90 * 0090 APR | | | | | 91 * 00A0 PPR | | | | | 92 * +-----------+-----------+-----------+-----------+ 93 * 94 * The Task Priority Register provides a priority threshold 95 * mechanism for interrupting the processor. Only interrupts 96 * with a higher priority then that specified in the TPR will 97 * be served. Other interrupts are recorded and serviced 98 * as soon as the TPR value decreases enough to allow that 99 * (unless EOId by another APIC). 100 * 101 * PRIO (7:4). Main priority. If 15 the APIC will not 102 * accept any interrupts. 103 * SUBC (3:0) Sub priority. See APR/PPR. 104 * 105 * 106 * The Processor Priority Register determines whether a 107 * pending interrupt can be dispensed to the processor. ISRV 108 * Is the vector of the highest priority ISR bit set or 109 * zero if no ISR bit is set. 110 * 111 * IF TPR[7:4] >= ISRV[7:4] 112 * PPR[7:0] = TPR[7:0] 113 * ELSE 114 * PPR[7:0] = ISRV[7:4].000 115 * 116 * The Arbitration Priority Register holds the current 117 * lowest priority of the procsesor, a value used during 118 * lowest-priority arbitration. 119 * 120 * IF (TPR[7:4] >= IRRV[7:4] AND TPR[7:4] > ISRV[7:4]) 121 * APR[7:0] = TPR[7:0] 122 * ELSE 123 * APR[7:4] = max((TPR[7:4]&ISRV[7:4]),IRRV[7:4]).000 124 * 125 * +-----------+-----------+-----------+-----------+ 126 * 00B0 EOI | | | | | 127 * +-----------+-----------+-----------+-----------+ 128 * 00C0 | | | | | 129 * +-----------+-----------+-----------+-----------+ 130 * 00D0 LDR |LOG APICID | | | | 131 * +-----------+-----------+-----------+-----------+ 132 * 00E0 DFR |MODEL| | | | | 133 * +-----------+-----------+-----------+-----------+ 134 * 135 * The logical APIC ID is used with logical interrupt 136 * delivery modes. Interpretation of logical destination 137 * information depends on the MODEL bits in the Destination 138 * Format Regiuster. 139 * 140 * MODEL=1111 FLAT MODEL - The MDA is interpreted as 141 * a decoded address. By setting 142 * one bit in the LDR for each 143 * local apic 8 APICs can coexist. 144 * 145 * MODEL=0000 CLUSTER MODEL - 146 * 147 * 31 ... 24 23 ... 16 15 ... 8 7 ... 0 148 * +-----------+-----------+-----------+-----------+ 149 * 00F0 SVR | | | FE | vvvvvvvv | 150 * +-----------+-----------+-----------+-----------+ 151 * 152 * Spurious interrupt vector register. The 4 low 153 * vector bits must be programmed to 1111, e.g. 154 * vvvv1111. 155 * 156 * E - LAPIC disable (1 = disable, 0 = enable) 157 * 158 * F - Focus processor disable (1 = disable, 0 = enable) 159 * 160 * NOTE: The handler for the spurious interrupt vector 161 * should *NOT* issue an EOI because the spurious 162 * interrupt does not effect the ISR. 163 * 164 * +-----------+-----------+-----------+-----------+ 165 * 0100-0170 ISR| | | | | 166 * 0180-01F0 TMR| | | | | 167 * 0200-0270 IRR| | | | | 168 * +-----------+-----------+-----------+-----------+ 169 * 170 * These registers represent 256 bits, one bit for each 171 * possible interrupt. Interrupts 0-15 are reserved so 172 * bits 0-15 are also reserved. 173 * 174 * TMR - Trigger mode register. Upon acceptance of an int 175 * the corresponding bit is cleared for edge-trig and 176 * set for level-trig. If the TMR bit is set (level), 177 * the local APIC sends an EOI to all I/O APICs as 178 * a result of software issuing an EOI command. 179 * 180 * IRR - Interrupt Request Register. Contains active 181 * interrupt requests that have been accepted but not 182 * yet dispensed by the current local APIC. The bit is 183 * cleared and the corresponding ISR bit is set when 184 * the INTA cycle is issued. 185 * 186 * ISR - Interrupt In-Service register. Interrupt has been 187 * delivered but not yet fully serviced. Cleared when 188 * an EOI is issued from the processor. An EOI will 189 * also send an EOI to all I/O APICs if TMR was set. 190 * 191 * +-----------+-----------+-----------+-----------+ 192 * 0280 ESR | | | | | 193 * 0290-02F0 | | | | | 194 * +--FEDCBA98-+--76543210-+--FEDCBA98-+-----------+ 195 * 0300 ICR_LO | | XX | TL SDMMM | vector | 196 * 0310 ICR_HI | DEST FIELD| | | | 197 * +-----------+-----------+-----------+-----------+ 198 * 199 * The interrupt command register. Generally speaking 200 * writing to ICR_LO initiates a command. All fields 201 * are R/W except the 'S' (delivery status) field, which 202 * is read-only. When 203 * 204 * 205 * XX: Destination Shorthand field: 206 * 207 * 00 Use Destination field 208 * 01 Self only. Dest field ignored. 209 * 10 All including self (uses a 210 * destination field of 0x0F) 211 * 11 All excluding self (uses a 212 * destination field of 0x0F) 213 * 214 * T: 1 = Level 0 = Edge Trigger modde, used for 215 * the INIT level de-assert delivery mode only 216 * to de-assert a request. 217 * 218 * L: 0 = De-Assert, 1 = Assert. Always write as 219 * 1 when initiating a new command. Can only 220 * write as 0 for INIT mode de-assertion of 221 * command. 222 * 223 * S: 1 = Send Pending. Interrupt has been injected 224 * but APIC has not yet accepted it. 225 * 226 * D: 0=physical 1=logical. In physical mode 227 * only 24-27 of DEST FIELD is used from ICR_HI. 228 * 229 * MMM: 000 Fixed. Deliver to all processors according 230 * to the ICR. Always treated as edge trig. 231 * 232 * 001 Lowest Priority. Deliver to just the 233 * processor running at the lowest priority. 234 * 235 * 010 SMI. The vector must be 00B. Only edge 236 * triggered is allowed. The vector field 237 * must be programmed to zero (huh?). 238 * 239 * 011 <reserved> 240 * 241 * 100 NMI. Deliver as an NMI to all processors 242 * listed in the destination field. The 243 * vector is ignored. Alawys treated as 244 * edge triggered. 245 * 246 * 101 INIT. Deliver as an INIT signal to all 247 * processors (like FIXED). Vector is ignored 248 * and it is always edge-triggered. 249 * 250 * 110 Start Up. Sends a special message between 251 * cpus. the vector contains a start-up 252 * address for MP boot protocol. 253 * Always edge triggered. Note: a startup 254 * int is not automatically tried in case of 255 * failure. 256 * 257 * 111 <reserved> 258 * 259 * +-----------+--------10-+--FEDCBA98-+-----------+ 260 * 0320 LTIMER | | TM | ---S---- | vector | 261 * 0330 | | | | | 262 * +-----------+--------10-+--FEDCBA98-+-----------+ 263 * 0340 LVPCINT | | -M | ---S-MMM | vector | 264 * 0350 LVINT0 | | -M | LRPS-MMM | vector | 265 * 0360 LVINT1 | | -M | LRPS-MMM | vector | 266 * 0370 LVERROR | | -M | -------- | vector | 267 * +-----------+-----------+-----------+-----------+ 268 * 269 * T: 1 = periodic, 0 = one-shot 270 * 271 * M: 1 = masked 272 * 273 * L: 1 = level, 0 = edge 274 * 275 * R: For level triggered only, set to 1 when a 276 * level int is accepted, cleared by EOI. 277 * 278 * P: Pin Polarity 0 = Active High, 1 = Active Low 279 * 280 * S: 1 = Send Pending. Interrupt has been injected 281 * but APIC has not yet accepted it. 282 * 283 * MMM 000 = Fixed deliver to cpu according to LVT 284 * 285 * MMM 100 = NMI deliver as an NMI. Always edge 286 * 287 * MMM 111 = ExtInt deliver from 8259, routes INTA 288 * bus cycle to external 289 * controller. Controller is 290 * expected to supply vector. 291 * Always level. 292 * 293 * +-----------+-----------+-----------+-----------+ 294 * 0380 TMR_ICR | | | | | 295 * 0390 TMR_CCR | | | | | 296 * +-----------+-----------+-----------+-----------+ 297 * 298 * The timer initial count register and current count 299 * register (32 bits) 300 * 301 * +-----------+-----------+-----------+-----------+ 302 * 03A0 | | | | | 303 * 03B0 | | | | | 304 * 03C0 | | | | | 305 * 03D0 | | | | | 306 * +-----------+-----------+-----------+-----------+ 307 * 03E0 TMR_DCR | | | | d-dd | 308 * +-----------+-----------+-----------+-----------+ 309 * 310 * The timer divide configuration register. d-dd is: 311 * 312 * 0000 - divide by 2 313 * 0001 - divide by 4 314 * 0010 - divide by 8 315 * 0011 - divide by 16 316 * 1000 - divide by 32 317 * 1001 - divide by 64 318 * 1010 - divide by 128 319 * 1011 - divide by 1 320 * 321 * NOTE ON EOI: Upon receiving an EOI the APIC clears the highest priority 322 * interrupt in the ISR and selects the next highest priority interrupt 323 * for posting to the CPU. If the interrupt being EOId was level 324 * triggered the APIC will send an EOI to all I/O APICs. For the moment 325 * you can write garbage to the EOI register but for future compatibility 326 * 0 should be written. 327 */ 328 329 #ifndef LOCORE 330 #include <sys/types.h> 331 332 #define PAD3 int : 32; int : 32; int : 32 333 #define PAD4 int : 32; int : 32; int : 32; int : 32 334 335 struct LAPIC { 336 /* reserved */ PAD4; 337 /* reserved */ PAD4; 338 u_int32_t id; PAD3; /* 0020 R/W */ 339 u_int32_t version; PAD3; /* 0030 RO */ 340 /* reserved */ PAD4; 341 /* reserved */ PAD4; 342 /* reserved */ PAD4; 343 /* reserved */ PAD4; 344 u_int32_t tpr; PAD3; 345 u_int32_t apr; PAD3; 346 u_int32_t ppr; PAD3; 347 u_int32_t eoi; PAD3; 348 /* reserved */ PAD4; 349 u_int32_t ldr; PAD3; 350 u_int32_t dfr; PAD3; 351 u_int32_t svr; PAD3; 352 u_int32_t isr0; PAD3; 353 u_int32_t isr1; PAD3; 354 u_int32_t isr2; PAD3; 355 u_int32_t isr3; PAD3; 356 u_int32_t isr4; PAD3; 357 u_int32_t isr5; PAD3; 358 u_int32_t isr6; PAD3; 359 u_int32_t isr7; PAD3; 360 u_int32_t tmr0; PAD3; 361 u_int32_t tmr1; PAD3; 362 u_int32_t tmr2; PAD3; 363 u_int32_t tmr3; PAD3; 364 u_int32_t tmr4; PAD3; 365 u_int32_t tmr5; PAD3; 366 u_int32_t tmr6; PAD3; 367 u_int32_t tmr7; PAD3; 368 u_int32_t irr0; PAD3; 369 u_int32_t irr1; PAD3; 370 u_int32_t irr2; PAD3; 371 u_int32_t irr3; PAD3; 372 u_int32_t irr4; PAD3; 373 u_int32_t irr5; PAD3; 374 u_int32_t irr6; PAD3; 375 u_int32_t irr7; PAD3; 376 u_int32_t esr; PAD3; 377 /* reserved */ PAD4; 378 /* reserved */ PAD4; 379 /* reserved */ PAD4; 380 /* reserved */ PAD4; 381 /* reserved */ PAD4; 382 /* reserved */ PAD4; 383 /* reserved */ PAD4; 384 u_int32_t icr_lo; PAD3; 385 u_int32_t icr_hi; PAD3; 386 u_int32_t lvt_timer; PAD3; 387 /* reserved */ PAD4; 388 u_int32_t lvt_pcint; PAD3; 389 u_int32_t lvt_lint0; PAD3; 390 u_int32_t lvt_lint1; PAD3; 391 u_int32_t lvt_error; PAD3; 392 u_int32_t icr_timer; PAD3; 393 u_int32_t ccr_timer; PAD3; 394 /* reserved */ PAD4; 395 /* reserved */ PAD4; 396 /* reserved */ PAD4; 397 /* reserved */ PAD4; 398 u_int32_t dcr_timer; PAD3; 399 /* reserved */ PAD4; 400 }; 401 402 typedef struct LAPIC lapic_t; 403 404 /****************************************************************************** 405 * I/O APIC structure 406 */ 407 408 struct IOAPIC { 409 u_int32_t ioregsel; PAD3; 410 u_int32_t iowin; PAD3; 411 }; 412 413 typedef struct IOAPIC ioapic_t; 414 415 #undef PAD4 416 #undef PAD3 417 418 #endif /* !LOCORE */ 419 420 421 /****************************************************************************** 422 * various code 'logical' values 423 */ 424 425 /* 426 * TPR loads to prioritize which cpu grabs an interrupt 427 * 428 * (note: some fields of the TPR are reserved) 429 */ 430 #define LOPRIO_LEVEL 0x00000010 /* TPR of CPU accepting INTs */ 431 #define ALLHWI_LEVEL 0x00000000 /* TPR of CPU grabbing INTs */ 432 433 /****************************************************************************** 434 * LOCAL APIC defines 435 */ 436 437 /* 438 * default physical location for the LOCAL (CPU) APIC 439 */ 440 #define DEFAULT_APIC_BASE 0xfee00000 441 442 /* 443 * lapic.id (rw) 444 */ 445 #define APIC_ID_MASK 0xff000000 446 #define APIC_ID_SHIFT 24 447 #define APIC_ID_CLUSTER 0xf0 448 #define APIC_ID_CLUSTER_ID 0x0f 449 #define APIC_MAX_CLUSTER 0xe 450 #define APIC_MAX_INTRACLUSTER_ID 3 451 #define APIC_ID_CLUSTER_SHIFT 4 452 453 /* 454 * lapic.ver (ro) 455 */ 456 #define APIC_VER_VERSION 0x000000ff 457 #define APIC_VER_MAXLVT 0x00ff0000 458 #define MAXLVTSHIFT 16 459 460 /* 461 * lapic.ldr (rw) 462 */ 463 #define APIC_LDR_RESERVED 0x00ffffff 464 465 /* 466 * lapic.dfr (rw) 467 * 468 * The logical APIC ID is used with logical interrupt 469 * delivery modes. Interpretation of logical destination 470 * information depends on the MODEL bits in the Destination 471 * Format Regiuster. 472 * 473 * MODEL=1111 FLAT MODEL - The MDA is interpreted as 474 * a decoded address. By setting 475 * one bit in the LDR for each 476 * local apic 8 APICs can coexist. 477 * 478 * MODEL=0000 CLUSTER MODEL - 479 */ 480 #define APIC_DFR_RESERVED 0x0fffffff 481 #define APIC_DFR_MODEL_MASK 0xf0000000 482 #define APIC_DFR_MODEL_FLAT 0xf0000000 483 #define APIC_DFR_MODEL_CLUSTER 0x00000000 484 485 /* 486 * lapic.svr 487 * 488 * Contains the spurious interrupt vector and bits to enable/disable 489 * the local apic and focus processor. 490 */ 491 #define APIC_SVR_VECTOR 0x000000ff 492 #define APIC_SVR_ENABLE 0x00000100 493 #define APIC_SVR_FOCUS_DISABLE 0x00000200 494 495 /* 496 * lapic.tpr 497 * 498 * PRIO (7:4). Main priority. If 15 the APIC will not 499 * accept any interrupts. 500 * SUBC (3:0) Sub priority. See APR/PPR. 501 */ 502 #define APIC_TPR_PRIO 0x000000ff 503 #define APIC_TPR_INT 0x000000f0 504 #define APIC_TPR_SUB 0x0000000f 505 506 /* 507 * lapic.icr_lo -------- ----XXRR TL-SDMMM vvvvvvvv 508 * 509 * The interrupt command register. Generally speaking 510 * writing to ICR_LO initiates a command. All fields 511 * are R/W except the 'S' (delivery status) field, which 512 * is read-only. When 513 * 514 * XX: Destination Shorthand field: 515 * 516 * 00 - Use Destination field 517 * 01 - Self only. Dest field ignored. 518 * 10 - All including self (uses a 519 * destination field of 0x0F) 520 * 11 - All excluding self (uses a 521 * destination field of 0x0F) 522 * 523 * RR: RR mode (? needs documentation) 524 * 525 * T: 1 = Level 0 = Edge Trigger modde, used for 526 * the INIT level de-assert delivery mode only 527 * to de-assert a request. 528 * 529 * L: 0 = De-Assert, 1 = Assert. Always write as 530 * 1 when initiating a new command. Can only 531 * write as 0 for INIT mode de-assertion of 532 * command. 533 * 534 * S: 1 = Send Pending. Interrupt has been injected but the APIC 535 * has not yet accepted it. 536 * 537 * D: 0 = physical 1 = logical. In physical mode only bits 24-27 538 * of the DEST field is used from ICR_HI. 539 * 540 * MMM: Delivery mode 541 * 542 * 000 - Fixed. Deliver to all processors according to the 543 * ICR. Always treated as edge triggered. 544 * 545 * 001 - Lowest Priority. Deliver to just the processor 546 * running at the lowest priority. 547 * 548 * 010 - SMI. The vector must be 00B. Only edge triggered 549 * is allowed. The vector field must be programmed to 550 * 0 (huh?) 551 * 552 * 011 - RR Delivery mode (?? needs documentation). 553 * 554 * 100 - NMI. Deliver as an NMI to all processors listed in 555 * the destination field. The vector is ignored. Always 556 * treated as edge triggered. 557 * 558 * 101 - INIT. Deliver as an INIT signal to all processors 559 * (like FIXED) according to the ICR. The vector is 560 * ignored and delivery is always edge-triggered. 561 * 562 * 110 - Startup. Send a special message between cpus. The 563 * vector contains a startup address for the MP boot 564 * protocol. Always edge triggered. Note: a startup 565 * interrupt is not automatically tried in case of failure. 566 * 567 * 111 - <reserved> 568 */ 569 #define APIC_VECTOR_MASK 0x000000ff 570 571 #define APIC_DELMODE_MASK 0x00000700 572 #define APIC_DELMODE_FIXED 0x00000000 573 #define APIC_DELMODE_LOWPRIO 0x00000100 574 #define APIC_DELMODE_SMI 0x00000200 575 #define APIC_DELMODE_RR 0x00000300 576 #define APIC_DELMODE_NMI 0x00000400 577 #define APIC_DELMODE_INIT 0x00000500 578 #define APIC_DELMODE_STARTUP 0x00000600 579 #define APIC_DELMODE_RESV7 0x00000700 580 581 #define APIC_DESTMODE_MASK 0x00000800 582 #define APIC_DESTMODE_PHY 0x00000000 583 #define APIC_DESTMODE_LOG 0x00000800 584 585 #define APIC_DELSTAT_MASK 0x00001000 586 #define APIC_DELSTAT_IDLE 0x00000000 587 #define APIC_DELSTAT_PEND 0x00001000 588 589 #define APIC_LEVEL_MASK 0x00004000 590 #define APIC_LEVEL_DEASSERT 0x00000000 591 #define APIC_LEVEL_ASSERT 0x00004000 592 593 #define APIC_TRIGMOD_MASK 0x00008000 594 #define APIC_TRIGMOD_EDGE 0x00000000 595 #define APIC_TRIGMOD_LEVEL 0x00008000 596 597 #define APIC_RRSTAT_MASK 0x00030000 598 #define APIC_RRSTAT_INVALID 0x00000000 599 #define APIC_RRSTAT_INPROG 0x00010000 600 #define APIC_RRSTAT_VALID 0x00020000 601 #define APIC_RRSTAT_RESV 0x00030000 602 603 #define APIC_DEST_MASK 0x000c0000 604 #define APIC_DEST_DESTFLD 0x00000000 605 #define APIC_DEST_SELF 0x00040000 606 #define APIC_DEST_ALLISELF 0x00080000 607 #define APIC_DEST_ALLESELF 0x000c0000 608 609 #define APIC_ICRLO_RESV_MASK 0xfff02000 610 611 /* 612 * lapic.icr_hi 613 */ 614 #define APIC_ICRH_ID_MASK APIC_ID_MASK 615 616 /* 617 * lapic.lvt_timer 618 * lapic.lvt_pcint 619 * lapic.lvt_lint0 620 * lapic.lvt_lint1 621 * lapic.lvt_error 622 * 623 * +-----------+--------10-+--FEDCBA98-+-----------+ 624 * 0320 LTIMER | | TM | ---S---- | vector | 625 * 0330 | | | | | 626 * +-----------+--------10-+--FEDCBA98-+-----------+ 627 * 0340 LVPCINT | | -M | ---S-MMM | vector | 628 * 0350 LVINT0 | | -M | LRPS-MMM | vector | 629 * 0360 LVINT1 | | -M | LRPS-MMM | vector | 630 * 0370 LVERROR | | -M | -------- | vector | 631 * +-----------+-----------+-----------+-----------+ 632 * 633 * T: 1 = periodic, 0 = one-shot 634 * (LTIMER only) 635 * 636 * M: 1 = masked 637 * 638 * L: 1 = level, 0 = edge 639 * (LVINT0/1 only) 640 * 641 * R: For level triggered only, set to 1 when a 642 * level int is accepted, cleared by EOI. 643 * (LVINT0/1 only) 644 * 645 * P: Pin Polarity 0 = Active High, 1 = Active Low 646 * (LVINT0/1 only) 647 * 648 * S: 1 = Send Pending. Interrupt has been injected 649 * but APIC has not yet accepted it. 650 * 651 * MMM 000 = Fixed deliver to cpu according to LVT 652 * 653 * MMM 100 = NMI deliver as an NMI. Always edge 654 * 655 * MMM 111 = ExtInt deliver from 8259, routes INTA 656 * bus cycle to external 657 * controller. Controller is 658 * expected to supply vector. 659 * Always level. 660 */ 661 #define APIC_LVT_VECTOR 0x000000ff 662 663 #define APIC_LVT_DM_MASK 0x00000700 664 #define APIC_LVT_DM_FIXED 0x00000000 665 #define APIC_LVT_DM_NMI 0x00000400 666 #define APIC_LVT_DM_EXTINT 0x00000700 667 668 #define APIC_LVT_DS 0x00001000 /* (S) Send Pending */ 669 #define APIC_LVT_POLARITY_MASK 0x00002000 670 #define APIC_LVT_POLARITY_LO 0x00002000 /* (P) Pin Polarity */ 671 #define APIC_LVT_POLARITY_HI 0x00000000 672 #define APIC_LVT_LEVELSTATUS 0x00004000 /* (R) level trig status */ 673 #define APIC_LVT_TRIG_MASK 0x00008000 674 #define APIC_LVT_LEVELTRIG 0x00008000 /* (L) 1 = level, 0 = edge */ 675 #define APIC_LVT_MASKED 0x00010000 /* (M) 1 = masked */ 676 677 /* 678 * lapic.lvt_timer 679 */ 680 #define APIC_LVTT_VECTOR APIC_LVT_VECTOR 681 #define APIC_LVTT_DS APIC_LVT_DS 682 #define APIC_LVTT_MASKED APIC_LVT_MASKED 683 #define APIC_LVTT_PERIODIC 0x00020000 684 685 #define APIC_TIMER_MAX_COUNT 0xffffffff 686 687 /* 688 * lapic.icr_timer - initial count register (32 bits) 689 * lapic.ccr_timer - current count register (32 bits) 690 */ 691 692 /* 693 * lapic.dcr_timer - timer divider register 694 * 695 * d0dd 696 * 697 * 0000 - divide by 2 698 * 0001 - divide by 4 699 * 0010 - divide by 8 700 * 0011 - divide by 16 701 * 1000 - divide by 32 702 * 1001 - divide by 64 703 * 1010 - divide by 128 704 * 1011 - divide by 1 705 */ 706 #define APIC_TDCR_2 0x00 707 #define APIC_TDCR_4 0x01 708 #define APIC_TDCR_8 0x02 709 #define APIC_TDCR_16 0x03 710 #define APIC_TDCR_32 0x08 711 #define APIC_TDCR_64 0x09 712 #define APIC_TDCR_128 0x0a 713 #define APIC_TDCR_1 0x0b 714 715 /* 716 * fields in IRR 717 * ISA INTerrupts are in bits 16-31 of the 1st IRR register. 718 * these masks DON'T EQUAL the isa IRQs of the same name. 719 */ 720 #define APIC_IRQ0 0 721 #define APIC_IRQ1 1 722 #define APIC_IRQ2 2 723 #define APIC_IRQ3 3 724 #define APIC_IRQ4 4 725 #define APIC_IRQ5 5 726 #define APIC_IRQ6 6 727 #define APIC_IRQ7 7 728 #define APIC_IRQ8 8 729 #define APIC_IRQ9 9 730 #define APIC_IRQ10 10 731 #define APIC_IRQ11 11 732 #define APIC_IRQ12 12 733 #define APIC_IRQ13 13 734 #define APIC_IRQ14 14 735 #define APIC_IRQ15 15 736 #define APIC_IRQ16 16 737 #define APIC_IRQ17 17 738 #define APIC_IRQ18 18 739 #define APIC_IRQ19 19 740 #define APIC_IRQ20 20 741 #define APIC_IRQ21 21 742 #define APIC_IRQ22 22 743 #define APIC_IRQ23 23 744 745 /****************************************************************************** 746 * I/O APIC defines 747 */ 748 749 /* default physical locations of an IO APIC */ 750 #define DEFAULT_IO_APIC_BASE 0xfec00000 751 752 /* window register offset */ 753 #define IOAPIC_WINDOW 0x10 754 755 /* 756 * indexes into IO APIC (index into array of 32 bit entities) 757 */ 758 #define IOAPIC_ID 0x00 759 #define IOAPIC_VER 0x01 760 #define IOAPIC_ARB 0x02 761 #define IOAPIC_REDTBL 0x10 762 #define IOAPIC_REDTBL0 IOAPIC_REDTBL 763 #define IOAPIC_REDTBL1 (IOAPIC_REDTBL+0x02) 764 #define IOAPIC_REDTBL2 (IOAPIC_REDTBL+0x04) 765 #define IOAPIC_REDTBL3 (IOAPIC_REDTBL+0x06) 766 #define IOAPIC_REDTBL4 (IOAPIC_REDTBL+0x08) 767 #define IOAPIC_REDTBL5 (IOAPIC_REDTBL+0x0a) 768 #define IOAPIC_REDTBL6 (IOAPIC_REDTBL+0x0c) 769 #define IOAPIC_REDTBL7 (IOAPIC_REDTBL+0x0e) 770 #define IOAPIC_REDTBL8 (IOAPIC_REDTBL+0x10) 771 #define IOAPIC_REDTBL9 (IOAPIC_REDTBL+0x12) 772 #define IOAPIC_REDTBL10 (IOAPIC_REDTBL+0x14) 773 #define IOAPIC_REDTBL11 (IOAPIC_REDTBL+0x16) 774 #define IOAPIC_REDTBL12 (IOAPIC_REDTBL+0x18) 775 #define IOAPIC_REDTBL13 (IOAPIC_REDTBL+0x1a) 776 #define IOAPIC_REDTBL14 (IOAPIC_REDTBL+0x1c) 777 #define IOAPIC_REDTBL15 (IOAPIC_REDTBL+0x1e) 778 #define IOAPIC_REDTBL16 (IOAPIC_REDTBL+0x20) 779 #define IOAPIC_REDTBL17 (IOAPIC_REDTBL+0x22) 780 #define IOAPIC_REDTBL18 (IOAPIC_REDTBL+0x24) 781 #define IOAPIC_REDTBL19 (IOAPIC_REDTBL+0x26) 782 #define IOAPIC_REDTBL20 (IOAPIC_REDTBL+0x28) 783 #define IOAPIC_REDTBL21 (IOAPIC_REDTBL+0x2a) 784 #define IOAPIC_REDTBL22 (IOAPIC_REDTBL+0x2c) 785 #define IOAPIC_REDTBL23 (IOAPIC_REDTBL+0x2e) 786 787 /* fields in VER */ 788 #define IOART_VER_VERSION 0x000000ff 789 #define IOART_VER_MAXREDIR 0x00ff0000 790 #define MAXREDIRSHIFT 16 791 792 /* 793 * fields in the IO APIC's redirection table entries 794 */ 795 796 /* 797 * High 32 bit word. The high 8 bits contain the destination field. 798 * 799 * If this entry is set up for Physical Mode, bits 59:56 (the low 4 bits 800 * of the 8 bit destination field) contain an APIC ID. 801 * 802 * If this entry is set up for Logical Mode, the destination field potentially 803 * defines a set of processors. Bits 63:56 (all 8 bits) specify the logical 804 * destination address. 805 * 806 * Current we use IOART_HI_DEST_BROADCAST to broadcast to all LAPICs 807 */ 808 #define IOART_HI_DEST_MASK APIC_ID_MASK 809 #define IOART_HI_DEST_RESV ~APIC_ID_MASK 810 #define IOART_HI_DEST_BROADCAST IOART_HI_DEST_MASK 811 812 /* 813 * Low 32 bit word 814 */ 815 #define IOART_RESV 0x00fe0000 /* reserved */ 816 817 /* 818 * Interrupt mask bit. If 1 the interrupt is masked. An edge sensitive 819 * interrupt which is masked will be lost. 820 */ 821 #define IOART_INTMASK 0x00010000 /* R/W: INTerrupt mask */ 822 #define IOART_INTMCLR 0x00000000 /* clear, allow INTs */ 823 #define IOART_INTMSET 0x00010000 /* set, inhibit INTs */ 824 825 /* 826 * Select trigger mode. 827 */ 828 #define IOART_TRGRMOD 0x00008000 /* R/W: trigger mode */ 829 #define IOART_TRGREDG 0x00000000 /* edge */ 830 #define IOART_TRGRLVL 0x00008000 /* level */ 831 832 /* 833 * Remote IRR. Only applies to level triggered interrupts, this bit 834 * is set to 1 when the IOAPIC has delivered a level triggered interrupt 835 * to a local APIC. It is cleared when the LAPIC EOI's the interrupt. 836 * This field is read-only. 837 */ 838 #define IOART_REM_IRR 0x00004000 /* RO: remote IRR */ 839 840 /* 841 * Select interrupt pin polarity 842 */ 843 #define IOART_INTPOL 0x00002000 /* R/W: INT input pin polarity */ 844 #define IOART_INTAHI 0x00000000 /* active high */ 845 #define IOART_INTALO 0x00002000 /* active low */ 846 847 /* 848 * Delivery Status (read only). 0 = no interrupt pending, 1 = interrupt 849 * pending for tranmission to an LAPIC. Note that this bit does not 850 * indicate whether the interrupt has been processed or is undergoing 851 * processing by a cpu. 852 */ 853 #define IOART_DELIVS 0x00001000 /* RO: delivery status */ 854 855 /* 856 * Destination mode. 857 * 858 * In physical mode the destination APIC is identified by its ID. 859 * Bits 56-59 specify the 4 bit APIC ID. 860 * 861 * In logical mode destinations are identified by matching on the logical 862 * destination under the control of the destination format register and 863 * logical destination register in each local APIC. 864 * 865 */ 866 #define IOART_DESTMOD 0x00000800 /* R/W: destination mode */ 867 #define IOART_DESTPHY 0x00000000 /* physical */ 868 #define IOART_DESTLOG 0x00000800 /* logical */ 869 870 /* 871 * Delivery mode. 872 * 873 * 000 Fixed Deliver the signal on the INTR signal for 874 * all processor core's LAPICs listed in the 875 * destination. The trigger mode may be 876 * edge or level. 877 * 878 * 001 Lowest Pri Deliver to the processor core whos LAPIC 879 * is operating at the lowest priority (TPR). 880 * The trigger mode may be edge or level. 881 * 882 * 010 SMI System management interrupt. the vector 883 * information is ignored but must be programmed 884 * to all zero's for future compatibility. 885 * Must be edge triggered. 886 * 887 * 011 Reserved 888 * 889 * 100 NMI Deliver on the NMI signal for all cpu cores 890 * listed in the destination. Vector information 891 * is ignored. NMIs are treated as edge triggered 892 * interrupts even if programmed as level 893 * triggered. For proper operation the pin must 894 * be programmed as an edge trigger. 895 * 896 * 101 INIT Deliver to all processor cores listed in 897 * the destination by asserting their INIT signal. 898 * All addressed LAPICs will assume their INIT 899 * state. Always treated as edge-triggered even 900 * if programmed as level. For proper operation 901 * the pin must be programed as an edge trigger. 902 * 903 * 110 Reserved 904 * 905 * 111 ExINT Deliver as an INTR signal to all processor 906 * cores listed in the destination as an 907 * interrupt originating in an externally 908 * connected interrupt controller. 909 * The INTA cycle corresponding to this ExINT 910 * will be routed to the external controller 911 * that is expected to supply the vector. 912 * Must be edge triggered. 913 * 914 */ 915 #define IOART_DELMOD 0x00000700 /* R/W: delivery mode */ 916 #define IOART_DELFIXED 0x00000000 /* fixed */ 917 #define IOART_DELLOPRI 0x00000100 /* lowest priority */ 918 #define IOART_DELSMI 0x00000200 /* System Management INT */ 919 #define IOART_DELRSV1 0x00000300 /* reserved */ 920 #define IOART_DELNMI 0x00000400 /* NMI signal */ 921 #define IOART_DELINIT 0x00000500 /* INIT signal */ 922 #define IOART_DELRSV2 0x00000600 /* reserved */ 923 #define IOART_DELEXINT 0x00000700 /* External INTerrupt */ 924 925 /* 926 * The interrupt vector. Valid values range from 0x10 to 0xFE. 927 */ 928 #define IOART_INTVEC 0x000000ff /* R/W: INTerrupt vector field */ 929 930 #endif /* _MACHINE_APIC_H_ */ 931