1.\" $OpenBSD: patch.1,v 1.20 2007/05/31 19:20:14 jmc Exp $ 2.\" $DragonFly: src/usr.bin/patch/patch.1,v 1.9 2007/12/22 19:24:32 swildner Exp $ 3.\" 4.\" Copyright 1986, Larry Wall 5.\" 6.\" Redistribution and use in source and binary forms, with or without 7.\" modification, are permitted provided that the following condition 8.\" is met: 9.\" 1. Redistributions of source code must retain the above copyright 10.\" notice, this condition and the following disclaimer. 11.\" 12.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 13.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 14.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 15.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 16.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 17.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 18.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 19.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 20.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 21.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 22.\" SUCH DAMAGE. 23.\" 24.Dd September 30, 2007 25.Dt PATCH 1 26.Os 27.Sh NAME 28.Nm patch 29.Nd apply a diff file to an original 30.Sh SYNOPSIS 31.Nm 32.Bk -words 33.Op Fl bCcEeflNnRstuv 34.Op Fl B Ar backup-prefix 35.Op Fl D Ar symbol 36.Op Fl d Ar directory 37.Op Fl F Ar max-fuzz 38.Op Fl i Ar patchfile 39.Op Fl o Ar out-file 40.Op Fl p Ar strip-count 41.Op Fl r Ar rej-name 42.Op Fl V Cm t | nil | never 43.Op Fl x Ar number 44.Op Fl z Ar backup-ext 45.Op Fl Fl posix 46.Op Ar origfile Op Ar patchfile 47.Ek 48.Nm 49.Pf \*(Lt Ar patchfile 50.Sh DESCRIPTION 51.Nm 52will take a patch file containing any of the four forms of difference 53listing produced by the 54.Xr diff 1 55program and apply those differences to an original file, 56producing a patched version. 57If 58.Ar patchfile 59is omitted, or is a hyphen, the patch will be read from the standard input. 60.Pp 61.Nm 62will attempt to determine the type of the diff listing, unless over-ruled by a 63.Fl c , 64.Fl e , 65.Fl n , 66or 67.Fl u 68option. 69Context diffs (old-style, new-style, and unified) and 70normal diffs are applied directly by the 71.Nm 72program itself, whereas ed diffs are simply fed to the 73.Xr ed 1 74editor via a pipe. 75.Pp 76If the 77.Ar patchfile 78contains more than one patch, 79.Nm 80will try to apply each of them as if they came from separate patch files. 81This means, among other things, that it is assumed that the name of the file 82to patch must be determined for each diff listing, and that the garbage before 83each diff listing will be examined for interesting things such as file names 84and revision level (see the section on 85.Sx Filename Determination 86below). 87.Pp 88The options are as follows: 89.Bl -tag -width Ds 90.It Xo 91.Fl B Ar backup-prefix , 92.Fl Fl prefix Ar backup-prefix 93.Xc 94Causes the next argument to be interpreted as a prefix to the backup file 95name. 96If this argument is specified, any argument to 97.Fl z 98will be ignored. 99.It Fl b , Fl Fl backup 100Save a backup copy of the file before it is modified. 101By default the original file is saved with a backup extension of 102.Qq .orig 103unless the file already has a numbered backup, in which case a numbered 104backup is made. 105This is equivalent to specifying 106.Qo Fl V Cm existing Qc . 107This option is currently the default but that will change in a future release. 108.It Fl C , Fl Fl check 109Checks that the patch would apply cleanly, but does not modify anything. 110.It Fl c , Fl Fl context 111Forces 112.Nm 113to interpret the patch file as a context diff. 114.It Xo 115.Fl D Ar symbol , 116.Fl Fl ifdef Ar symbol 117.Xc 118Causes 119.Nm 120to use the 121.Qq #ifdef...#endif 122construct to mark changes. 123The argument following will be used as the differentiating symbol. 124Note that, unlike the C compiler, there must be a space between the 125.Fl D 126and the argument. 127.It Xo 128.Fl d Ar directory , 129.Fl Fl directory Ar directory 130.Xc 131Causes 132.Nm 133to interpret the next argument as a directory, and 134.Xr cd 1 135to it before doing anything else. 136.It Fl E , Fl Fl remove-empty-files 137Causes 138.Nm 139to remove output files that are empty after the patches have been applied. 140This option is useful when applying patches that create or remove files. 141.It Fl e , Fl Fl ed 142Forces 143.Nm 144to interpret the patch file as an 145.Xr ed 1 146script. 147.It Xo 148.Fl F Ar max-fuzz , 149.Fl Fl fuzz Ar max-fuzz 150.Xc 151Sets the maximum fuzz factor. 152This option only applies to context diffs, and causes 153.Nm 154to ignore up to that many lines in looking for places to install a hunk. 155Note that a larger fuzz factor increases the odds of a faulty patch. 156The default fuzz factor is 2, and it may not be set to more than 157the number of lines of context in the context diff, ordinarily 3. 158.It Fl f , Fl Fl force 159Forces 160.Nm 161to assume that the user knows exactly what he or she is doing, and to not 162ask any questions. 163It assumes the following: 164skip patches for which a file to patch can't be found; 165patch files even though they have the wrong version for the 166.Qq Prereq: 167line in the patch; 168and assume that patches are not reversed even if they look like they are. 169This option does not suppress commentary; use 170.Fl s 171for that. 172.It Xo 173.Fl i Ar patchfile , 174.Fl Fl input Ar patchfile 175.Xc 176Causes the next argument to be interpreted as the input file name 177(i.e. a patchfile). 178This option may be specified multiple times. 179.It Fl l , Fl Fl ignore-whitespace 180Causes the pattern matching to be done loosely, in case the tabs and 181spaces have been munged in your input file. 182Any sequence of whitespace in the pattern line will match any sequence 183in the input file. 184Normal characters must still match exactly. 185Each line of the context must still match a line in the input file. 186.It Fl N , Fl Fl forward 187Causes 188.Nm 189to ignore patches that it thinks are reversed or already applied. 190See also 191.Fl R . 192.It Fl n , Fl Fl normal 193Forces 194.Nm 195to interpret the patch file as a normal diff. 196.It Xo 197.Fl o Ar out-file , 198.Fl Fl output Ar out-file 199.Xc 200Causes the next argument to be interpreted as the output file name. 201.It Xo 202.Fl p Ar strip-count , 203.Fl Fl strip Ar strip-count 204.Xc 205Sets the pathname strip count, 206which controls how pathnames found in the patch file are treated, 207in case you keep your files in a different directory than the person who sent 208out the patch. 209The strip count specifies how many slashes are to be stripped from 210the front of the pathname. 211(Any intervening directory names also go away.) 212For example, supposing the file name in the patch file was 213.Pa /u/howard/src/blurfl/blurfl.c : 214.Pp 215Setting 216.Fl p Ns Ar 0 217gives the entire pathname unmodified. 218.Pp 219.Fl p Ns Ar 1 220gives 221.Pp 222.D1 Pa u/howard/src/blurfl/blurfl.c 223.Pp 224without the leading slash. 225.Pp 226.Fl p Ns Ar 4 227gives 228.Pp 229.D1 Pa blurfl/blurfl.c 230.Pp 231Not specifying 232.Fl p 233at all just gives you 234.Pa blurfl.c , 235unless all of the directories in the leading path 236.Pq Pa u/howard/src/blurfl 237exist and that path is relative, 238in which case you get the entire pathname unmodified. 239Whatever you end up with is looked for either in the current directory, 240or the directory specified by the 241.Fl d 242option. 243.It Fl R , Fl Fl reverse 244Tells 245.Nm 246that this patch was created with the old and new files swapped. 247(Yes, I'm afraid that does happen occasionally, human nature being what it 248is.) 249.Nm 250will attempt to swap each hunk around before applying it. 251Rejects will come out in the swapped format. 252The 253.Fl R 254option will not work with ed diff scripts because there is too little 255information to reconstruct the reverse operation. 256.Pp 257If the first hunk of a patch fails, 258.Nm 259will reverse the hunk to see if it can be applied that way. 260If it can, you will be asked if you want to have the 261.Fl R 262option set. 263If it can't, the patch will continue to be applied normally. 264(Note: this method cannot detect a reversed patch if it is a normal diff 265and if the first command is an append (i.e. it should have been a delete) 266since appends always succeed, due to the fact that a null context will match 267anywhere. 268Luckily, most patches add or change lines rather than delete them, so most 269reversed normal diffs will begin with a delete, which will fail, triggering 270the heuristic.) 271.It Xo 272.Fl r Ar rej-name , 273.Fl Fl reject-file Ar rej-name 274.Xc 275Causes the next argument to be interpreted as the reject file name. 276.It Xo 277.Fl s , Fl Fl quiet , 278.Fl Fl silent 279.Xc 280Makes 281.Nm 282do its work silently, unless an error occurs. 283.It Fl t , Fl Fl batch 284Similar to 285.Fl f , 286in that it suppresses questions, but makes some different assumptions: 287skip patches for which a file to patch can't be found (the same as 288.Fl f ) ; 289skip patches for which the file has the wrong version for the 290.Qq Prereq: 291line in the patch; 292and assume that patches are reversed if they look like they are. 293.It Fl u , Fl Fl unified 294Forces 295.Nm 296to interpret the patch file as a unified context diff (a unidiff). 297.It Xo 298.Fl V Cm t | nil | never , 299.Fl Fl version-control Cm t | nil | never 300.Xc 301Causes the next argument to be interpreted as a method for creating 302backup file names. 303The type of backups made can also be given in the 304.Ev PATCH_VERSION_CONTROL 305or 306.Ev VERSION_CONTROL 307environment variables, which are overridden by this option. 308The 309.Fl B 310option overrides this option, causing the prefix to always be used for 311making backup file names. 312The values of the 313.Ev PATCH_VERSION_CONTROL 314and 315.Ev VERSION_CONTROL 316environment variables and the argument to the 317.Fl V 318option are like the GNU Emacs 319.Dq version-control 320variable; they also recognize synonyms that are more descriptive. 321The valid values are (unique abbreviations are accepted): 322.Bl -tag -width Ds -offset indent 323.It Cm t , numbered 324Always make numbered backups. 325.It Cm nil , existing 326Make numbered backups of files that already have them, 327simple backups of the others. 328.It Cm never , simple 329Always make simple backups. 330.El 331.It Fl v , Fl Fl version 332Causes 333.Nm 334to print out its revision header and patch level. 335.It Xo 336.Fl x Ar number , 337.Fl Fl debug Ar number 338.Xc 339Sets internal debugging flags, and is of interest only to 340.Nm 341patchers. 342.It Xo 343.Fl z Ar backup-ext , 344.Fl Fl suffix Ar backup-ext 345.Xc 346Causes the next argument to be interpreted as the backup extension, to be 347used in place of 348.Qq .orig . 349.It Fl Fl posix 350Enables strict 351.St -p1003.2 352conformance, specifically: 353.Bl -enum 354.It 355Backup files are not created unless the 356.Fl b 357option is specified. 358.It 359If unspecified, the file name used is the first of the old, new and 360index files that exists. 361.El 362.El 363.Ss Patch Application 364.Nm 365will try to skip any leading garbage, apply the diff, 366and then skip any trailing garbage. 367Thus you could feed an article or message containing a 368diff listing to 369.Nm , 370and it should work. 371If the entire diff is indented by a consistent amount, 372this will be taken into account. 373.Pp 374With context diffs, and to a lesser extent with normal diffs, 375.Nm 376can detect when the line numbers mentioned in the patch are incorrect, 377and will attempt to find the correct place to apply each hunk of the patch. 378As a first guess, it takes the line number mentioned for the hunk, plus or 379minus any offset used in applying the previous hunk. 380If that is not the correct place, 381.Nm 382will scan both forwards and backwards for a set of lines matching the context 383given in the hunk. 384First 385.Nm 386looks for a place where all lines of the context match. 387If no such place is found, and it's a context diff, and the maximum fuzz factor 388is set to 1 or more, then another scan takes place ignoring the first and last 389line of context. 390If that fails, and the maximum fuzz factor is set to 2 or more, 391the first two and last two lines of context are ignored, 392and another scan is made. 393.Pq The default maximum fuzz factor is 2. 394.Pp 395If 396.Nm 397cannot find a place to install that hunk of the patch, it will put the hunk 398out to a reject file, which normally is the name of the output file plus 399.Qq .rej . 400(Note that the rejected hunk will come out in context diff form whether the 401input patch was a context diff or a normal diff. 402If the input was a normal diff, many of the contexts will simply be null.) 403The line numbers on the hunks in the reject file may be different than 404in the patch file: they reflect the approximate location patch thinks the 405failed hunks belong in the new file rather than the old one. 406.Pp 407As each hunk is completed, you will be told whether the hunk succeeded or 408failed, and which line (in the new file) 409.Nm 410thought the hunk should go on. 411If this is different from the line number specified in the diff, 412you will be told the offset. 413A single large offset MAY be an indication that a hunk was installed in the 414wrong place. 415You will also be told if a fuzz factor was used to make the match, in which 416case you should also be slightly suspicious. 417.Ss Filename Determination 418If no original file is specified on the command line, 419.Nm 420will try to figure out from the leading garbage what the name of the file 421to edit is. 422When checking a prospective file name, pathname components are stripped 423as specified by the 424.Fl p 425option and the file's existence and writability are checked relative 426to the current working directory (or the directory specified by the 427.Fl d 428option). 429.Pp 430If the diff is a context or unified diff, 431.Nm 432is able to determine the old and new file names from the diff header. 433For context diffs, the 434.Dq old 435file is specified in the line beginning with 436.Qq *** 437and the 438.Dq new 439file is specified in the line beginning with 440.Qq --- . 441For a unified diff, the 442.Dq old 443file is specified in the line beginning with 444.Qq --- 445and the 446.Dq new 447file is specified in the line beginning with 448.Qq +++ . 449If there is an 450.Qq Index: 451line in the leading garbage (regardless of the diff type), 452.Nm 453will use the file name from that line as the 454.Dq index 455file. 456.Pp 457.Nm 458will choose the file name by performing the following steps, with the first 459match used: 460.Bl -enum 461.It 462If 463.Nm 464is operating in strict 465.St -p1003.2 466mode, the first of the 467.Dq old , 468.Dq new 469and 470.Dq index 471file names that exist is used. 472Otherwise, 473.Nm 474will examine either the 475.Dq old 476and 477.Dq new 478file names or, for a non-context diff, the 479.Dq index 480file name, and choose the file name with the fewest path components, 481the shortest basename, and the shortest total file name length (in that order). 482.It 483If no file exists, 484.Nm 485checks for the existence of the files in an SCCS or RCS directory 486(using the appropriate prefix or suffix) using the criteria specified 487above. 488If found, 489.Nm 490will attempt to get or check out the file. 491.It 492If no suitable file was found to patch, the patch file is a context or 493unified diff, and the old file was zero length, the new file name is 494created and used. 495.It 496If the file name still cannot be determined, 497.Nm 498will prompt the user for the file name to use. 499.El 500.Pp 501Additionally, if the leading garbage contains a 502.Qq Prereq:\ \& 503line, 504.Nm 505will take the first word from the prerequisites line (normally a version 506number) and check the input file to see if that word can be found. 507If not, 508.Nm 509will ask for confirmation before proceeding. 510.Pp 511The upshot of all this is that you should be able to say, while in a news 512interface, the following: 513.Pp 514.Dl | patch -d /usr/src/local/blurfl 515.Pp 516and patch a file in the blurfl directory directly from the article containing 517the patch. 518.Ss Backup Files 519By default, the patched version is put in place of the original, with 520the original file backed up to the same name with the extension 521.Qq .orig , 522or as specified by the 523.Fl B , 524.Fl V , 525or 526.Fl z 527options. 528The extension used for making backup files may also be specified in the 529.Ev SIMPLE_BACKUP_SUFFIX 530environment variable, which is overridden by the options above. 531.Pp 532If the backup file is a symbolic or hard link to the original file, 533.Nm 534creates a new backup file name by changing the first lowercase letter 535in the last component of the file's name into uppercase. 536If there are no more lowercase letters in the name, 537it removes the first character from the name. 538It repeats this process until it comes up with a 539backup file that does not already exist or is not linked to the original file. 540.Pp 541You may also specify where you want the output to go with the 542.Fl o 543option; if that file already exists, it is backed up first. 544.Ss Notes For Patch Senders 545There are several things you should bear in mind if you are going to 546be sending out patches: 547.Pp 548First, you can save people a lot of grief by keeping a 549.Pa patchlevel.h 550file which is patched to increment the patch level as the first diff in the 551patch file you send out. 552If you put a 553.Qq Prereq: 554line in with the patch, it won't let them apply 555patches out of order without some warning. 556.Pp 557Second, make sure you've specified the file names right, either in a 558context diff header, or with an 559.Qq Index: 560line. 561If you are patching something in a subdirectory, be sure to tell the patch 562user to specify a 563.Fl p 564option as needed. 565.Pp 566Third, you can create a file by sending out a diff that compares a 567null file to the file you want to create. 568This will only work if the file you want to create doesn't exist already in 569the target directory. 570.Pp 571Fourth, take care not to send out reversed patches, since it makes people wonder 572whether they already applied the patch. 573.Pp 574Fifth, while you may be able to get away with putting 582 diff listings into 575one file, it is probably wiser to group related patches into separate files in 576case something goes haywire. 577.Sh ENVIRONMENT 578.Bl -tag -width "PATCH_VERSION_CONTROL" -compact 579.It Ev POSIXLY_CORRECT 580When set, 581.Nm 582behaves as if the 583.Fl Fl posix 584option has been specified. 585.It Ev SIMPLE_BACKUP_SUFFIX 586Extension to use for backup file names instead of 587.Qq .orig . 588.It Ev TMPDIR 589Directory to put temporary files in; default is 590.Pa /tmp . 591.It Ev PATCH_VERSION_CONTROL 592Selects when numbered backup files are made. 593.It Ev VERSION_CONTROL 594Same as 595.Ev PATCH_VERSION_CONTROL . 596.El 597.Sh FILES 598.Bl -tag -width "$TMPDIR/patch*" -compact 599.It Pa $TMPDIR/patch* 600.Nm 601temporary files 602.It Pa /dev/tty 603used to read input when 604.Nm 605prompts the user 606.El 607.Sh DIAGNOSTICS 608Too many to list here, but generally indicative that 609.Nm 610couldn't parse your patch file. 611.Pp 612The message 613.Qq Hmm... 614indicates that there is unprocessed text in the patch file and that 615.Nm 616is attempting to intuit whether there is a patch in that text and, if so, 617what kind of patch it is. 618.Pp 619The 620.Nm 621utility exits with one of the following values: 622.Pp 623.Bl -tag -width Ds -compact -offset indent 624.It \&0 625Successful completion. 626.It \&1 627One or more lines were written to a reject file. 628.It \*[Gt]\&1 629An error occurred. 630.El 631.Pp 632When applying a set of patches in a loop it behooves you to check this 633exit status so you don't apply a later patch to a partially patched file. 634.Sh SEE ALSO 635.Xr diff 1 636.Sh STANDARDS 637The 638.Nm 639utility is compliant with the 640.St -p1003.1-2004 641specification, 642but its presence is optional. 643.Pp 644The flags 645.Op Fl CEfstuvBFVxz 646and 647.Op Fl -posix 648are extensions to that specification. 649.Sh AUTHORS 650.An Larry Wall 651with many other contributors. 652.Sh CAVEATS 653.Nm 654cannot tell if the line numbers are off in an ed script, and can only detect 655bad line numbers in a normal diff when it finds a 656.Qq change 657or a 658.Qq delete 659command. 660A context diff using fuzz factor 3 may have the same problem. 661Until a suitable interactive interface is added, you should probably do 662a context diff in these cases to see if the changes made sense. 663Of course, compiling without errors is a pretty good indication that the patch 664worked, but not always. 665.Pp 666.Nm 667usually produces the correct results, even when it has to do a lot of 668guessing. 669However, the results are guaranteed to be correct only when the patch is 670applied to exactly the same version of the file that the patch was 671generated from. 672.Sh BUGS 673Could be smarter about partial matches, excessively deviant offsets and 674swapped code, but that would take an extra pass. 675.Pp 676Check patch mode 677.Pq Fl C 678will fail if you try to check several patches in succession that build on 679each other. 680The entire 681.Nm 682code would have to be restructured to keep temporary files around so that it 683can handle this situation. 684.Pp 685If code has been duplicated (for instance with #ifdef OLDCODE ... #else ... 686#endif), 687.Nm 688is incapable of patching both versions, and, if it works at all, will likely 689patch the wrong one, and tell you that it succeeded to boot. 690.Pp 691If you apply a patch you've already applied, 692.Nm 693will think it is a reversed patch, and offer to un-apply the patch. 694This could be construed as a feature. 695