usr.sbin/vnconfig/vnconfig.8

.\" Copyright (c) 1993 University of Utah.
.\" Copyright (c) 1980, 1989, 1991, 1993
.\"	The Regents of the University of California.  All rights reserved.
.\"
.\" This code is derived from software contributed to Berkeley by
.\" the Systems Programming Group of the University of Utah Computer
.\" Science Department.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\"    notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\"    notice, this list of conditions and the following disclaimer in the
.\"    documentation and/or other materials provided with the distribution.
.\" 3. All advertising materials mentioning features or use of this software
.\"    must display the following acknowledgement:
.\"	This product includes software developed by the University of
.\"	California, Berkeley and its contributors.
.\" 4. Neither the name of the University nor the names of its contributors
.\"    may be used to endorse or promote products derived from this software
.\"    without specific prior written permission.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
.\" SUCH DAMAGE.
.\"
.\"     @(#)vnconfig.8	8.1 (Berkeley) 6/5/93
.\" $FreeBSD: src/usr.sbin/vnconfig/vnconfig.8,v 1.14.2.8 2003/01/04 22:35:53 keramida Exp $
.\" $DragonFly: src/usr.sbin/vnconfig/vnconfig.8,v 1.5 2007/08/10 18:28:27 swildner Exp $
.\"
.Dd July 8, 1993
.Dt VNCONFIG 8
.Os
.Sh NAME
.Nm vnconfig
.Nd configure and enable vnode disks
.Sh SYNOPSIS
.Nm
.Op Fl cdeguvTZ
.Oo Fl s Ar option Ns
.Op , Ns Ar option Ns Ar ... Oc
.Oo Fl r Ar option Ns
.Op , Ns Ar option Ns Ar ... Oc
.Op Fl S Ar value
.Ar special_file Op Ar regular_file
.Op Ar feature
.Nm
.Fl a
.Op Fl cdeguv
.Op Fl s Ar option
.Op Fl r Ar option
.Op Fl f Ar config_file
.Sh DESCRIPTION
The
.Nm
command configures and enables vnode pseudo disk devices.
The first form of the command will associate the special file
.Ar special_file
with the regular file
.Ar regular_file
allowing the latter to be accessed as though it were a disk.
Hence a regular file within the filesystem can be used for swapping
or can contain a filesystem that is mounted in the name space.  If you
want to use swap backing store for your device instead of a file, you
can leave regular_file out and specify the size of the block device
with the -S option.
.Pp
Options indicate an action to be performed:
.Bl -tag -width indent
.It Fl a
Read a command file and performs the
specified actions for each device/file pair.
.It Fl c
Configure the device.
If successful, references to
.Ar special_file
will access the contents of
.Ar regular_file .
.It Fl d
Disable (if possible) the specified feature.
.It Fl e
Configure the device and enables any
.Ar feature
that was specified.
If no feature was specified,
.Fl e
is the same as
.Fl c .
.It Fl f Ar config_file
Use
.Ar config_file
as an alternate config file.
.It Fl g
Fiddle global options.
.It Fl r Ar flag
Reset
.Ar flag .
The list of allowed flags and their meanings are:
.Bl -tag -width "follow"
.It Ar labels
use disk/slice labels.
.It Ar reserve
Pre-reserve the blocks underlying the file or swap backing store.  Currently only
works for swap backing store.  This option also disables on-the-fly freeing of
the underlying backing store (for example, when you remove a large file).
Use this option if you wish to avoid long-term fragmentation of the backing
store.  Also note that when this option is used, the initial contents of the
backing store may contain garbage rather than zeros.  It may even be possible to
recover the prior contents of a swap-backed VN across a reboot if the VN device
is configured before any swap is allocated by the system.
.It Ar follow
debug flow in the
.Xr vn 4
driver.
.It Ar debug
debug data in the
.Xr vn 4
driver.
.It Ar io
debug I/O in the
.Xr vn 4
driver.
.It Ar all
turn on all flags.
.It Ar none
turn off all flags.
.El
.It Fl s Ar flag
Set
.Ar flag .
The list of allowed flags and their meanings are the same as for the
.Fl r
option.
.It Fl S Xo
.Sm off
.Ar value
.Es \&{ \&}
.En Cm k , m , g , t
.Sm on
.Xc
If no regular file is specified, VN will use swap for backing store.
This option specifies the size of the device.  For example, '23m' for
23 megabytes.  The VN device will round the size up to a machine page boundary.
Filesystems up to 7.9 terabytes are supported.  When specified along with
a regular file, this option overrides the regular file's size insofar as
VN is concerned.
.It Fl T
When a regular file is specified, VN will ftruncate() the file to 0 first.
Normally you should also specify the -S option to set the size of the file.
This option also creates the file if it did not previously exist.
This option is only meaningful if the -S option has been specified.
.It Fl Z
When a regular file is specified, VN will zero the contents of the file to
ensure that all blocks have been allocated by the filesystem.  This option is
only meaningful if the -S option has been specified.
.It Fl u
Disable and ``unconfigure'' the device.
.It Fl v
Print messages to stdout describing actions taken.
.El
.Pp
If no action option is given,
.Fl c
is assumed.
.Pp
The
.Ar feature
argument specifies a feature that can be enabled via the
.Fl e
option:
.Bl -tag -width indent
.It Dv swap
Swapping is enabled on the special file.
See
.Xr swapon 2 .
.It Dv mountro Ns = Ns Pa mount_point
The special file is mounted read-only on
.Ar mount_point .
See
.Xr mount 2 .
.It Dv mountrw Ns = Ns Pa mount_point
The special file is mounted read-write on
.Ar mount_point .
See
.Xr mount 2 .
.It Dv mount Ns = Ns Pa mount_point
Same as ``mountrw=''.
.El
.Pp
A configuration file contains one line per device/file pair in the form:
.Bd -literal
	special_file	regular_file	[ feature ]
.Ed
.Pp
where fields are separated by white space.
The previously described action options serve to configure, enable,
disable or unconfigure all devices in the configuration file.
.Sh FILES
.Bl -tag -width /etc/vntab -compact
.It Pa /etc/vntab
default configuration file for
.Fl a
option
.El
.Sh EXAMPLES
.Dl vnconfig vn0 /tmp/diskimage
.Pp
Configures the vnode disk
.Pa vn0 .
.Pp
.Dl vnconfig -e vn0 /var/swapfile swap
.Pp
Configures
.Pa vn0
and enables swapping on it.
.Pp
.Dl vnconfig -c -v /dev/vn0 cdimage.iso
.Dl mount -t cd9660 -o ro /dev/vn0 /mnt
.Pp
Mount an ISO9660 CD image file.
.Pp
.Dl umount /mnt
.Dl vnconfig -u vn0
.Pp
Unmount the CD image file.
.Pp
.Dl vnconfig -d vn0 myfilesystem mount=/mnt
.Pp
Unmounts (disables)
.Pa vn0 .
.Pp
.Dl vnconfig -ae
.Pp
Configures and enables all devices specified in
.Pa /etc/vntab .
.Pp
.Dl vnconfig -s labels -c vn0 somebackingfile
.Dl disklabel -r -w vn0s0 auto
.Dl disklabel -e vn0s0
.Pp
Is an example of how to configure a file-backed VN disk with a disk label
and to initialize and then edit the label.  Once you create the label, you
can partition your VN disk and, for example, create a filesystem on one of
the partitions.  If you are using a file as backing store, it may be possible
to recover your VN disk after a crash by vnconfig'ing the same file again
and using the VN configuration already stored in the file rather than
relabeling and recreating the filesystem.  It is even possible to fsck the
VN partitions that previously contained filesystems.
.Pp
.Dl vnconfig -e -s labels,reserve -S 400m vn1
.Dl disklabel -r -w vn1s0 auto
.Dl newfs /dev/vn1s0
.Dl mount /dev/vn1s0 /usr/obj
.Pp
Is an example of a swap-backed VN disk configuration.  This example assumes
that you have at least 400 megabytes of swap free (and hopefully much more).
The swap space is pre-reserved in order to maintain maximum performance.
We then label the disk, newfs it, and mount it as /usr/obj.  Swap-backed VN
devices are recoverable after a crash if you (A) use the reserve flag, and if
(B) the same swap is reserved as was the last time, meaning that such
vnconfig's would have to be run in your rc.local.  In general, though, you
only use swap-backed VN devices to hold information you don't mind losing
on every reboot.
.Sh SEE ALSO
.Xr mount 2 ,
.Xr swapon 2 ,
.Xr unmount 2 ,
.Xr vn 4