1 /* 2 * refclock_zyfer - clock driver for the Zyfer GPSTarplus Clock 3 * 4 * Harlan Stenn, Jan 2002 5 */ 6 7 #ifdef HAVE_CONFIG_H 8 #include <config.h> 9 #endif 10 11 #if defined(REFCLOCK) && defined(CLOCK_ZYFER) 12 13 #include "ntpd.h" 14 #include "ntp_io.h" 15 #include "ntp_refclock.h" 16 #include "ntp_stdlib.h" 17 #include "ntp_unixtime.h" 18 19 #include <stdio.h> 20 #include <ctype.h> 21 22 #if defined(HAVE_TERMIOS_H) 23 # include <termios.h> 24 #elif defined(HAVE_SYS_TERMIOS_H) 25 # include <sys/termios.h> 26 #endif 27 #ifdef HAVE_SYS_PPSCLOCK_H 28 # include <sys/ppsclock.h> 29 #endif 30 31 /* 32 * This driver provides support for the TOD serial port of a Zyfer GPStarplus. 33 * This clock also provides PPS as well as IRIG outputs. 34 * Precision is limited by the serial driver, etc. 35 * 36 * If I was really brave I'd hack/generalize the serial driver to deal 37 * with arbitrary on-time characters. This clock *begins* the stream with 38 * `!`, the on-time character, and the string is *not* EOL-terminated. 39 * 40 * Configure the beast for 9600, 8N1. While I see leap-second stuff 41 * in the documentation, the published specs on the TOD format only show 42 * the seconds going to '59'. I see no leap warning in the TOD format. 43 * 44 * The clock sends the following message once per second: 45 * 46 * !TIME,2002,017,07,59,32,2,4,1 47 * YYYY DDD HH MM SS m T O 48 * 49 * ! On-time character 50 * YYYY Year 51 * DDD 001-366 Day of Year 52 * HH 00-23 Hour 53 * MM 00-59 Minute 54 * SS 00-59 Second (probably 00-60) 55 * m 1-5 Time Mode: 56 * 1 = GPS time 57 * 2 = UTC time 58 * 3 = LGPS time (Local GPS) 59 * 4 = LUTC time (Local UTC) 60 * 5 = Manual time 61 * T 4-9 Time Figure Of Merit: 62 * 4 x <= 1us 63 * 5 1us < x <= 10 us 64 * 6 10us < x <= 100us 65 * 7 100us < x <= 1ms 66 * 8 1ms < x <= 10ms 67 * 9 10ms < x 68 * O 0-4 Operation Mode: 69 * 0 Warm-up 70 * 1 Time Locked 71 * 2 Coasting 72 * 3 Recovering 73 * 4 Manual 74 * 75 */ 76 77 /* 78 * Interface definitions 79 */ 80 #define DEVICE "/dev/zyfer%d" /* device name and unit */ 81 #define SPEED232 B9600 /* uart speed (9600 baud) */ 82 #define PRECISION (-20) /* precision assumed (about 1 us) */ 83 #define REFID "GPS\0" /* reference ID */ 84 #define DESCRIPTION "Zyfer GPStarplus" /* WRU */ 85 86 #define LENZYFER 29 /* timecode length */ 87 88 /* 89 * Unit control structure 90 */ 91 struct zyferunit { 92 u_char Rcvbuf[LENZYFER + 1]; 93 u_char polled; /* poll message flag */ 94 int pollcnt; 95 l_fp tstamp; /* timestamp of last poll */ 96 int Rcvptr; 97 }; 98 99 /* 100 * Function prototypes 101 */ 102 static int zyfer_start (int, struct peer *); 103 static void zyfer_shutdown (int, struct peer *); 104 static void zyfer_receive (struct recvbuf *); 105 static void zyfer_poll (int, struct peer *); 106 107 /* 108 * Transfer vector 109 */ 110 struct refclock refclock_zyfer = { 111 zyfer_start, /* start up driver */ 112 zyfer_shutdown, /* shut down driver */ 113 zyfer_poll, /* transmit poll message */ 114 noentry, /* not used (old zyfer_control) */ 115 noentry, /* initialize driver (not used) */ 116 noentry, /* not used (old zyfer_buginfo) */ 117 NOFLAGS /* not used */ 118 }; 119 120 121 /* 122 * zyfer_start - open the devices and initialize data for processing 123 */ 124 static int 125 zyfer_start( 126 int unit, 127 struct peer *peer 128 ) 129 { 130 register struct zyferunit *up; 131 struct refclockproc *pp; 132 int fd; 133 char device[20]; 134 135 /* 136 * Open serial port. 137 * Something like LDISC_ACTS that looked for ! would be nice... 138 */ 139 snprintf(device, sizeof(device), DEVICE, unit); 140 fd = refclock_open(device, SPEED232, LDISC_RAW); 141 if (fd <= 0) 142 return (0); 143 144 msyslog(LOG_NOTICE, "zyfer(%d) fd: %d dev <%s>", unit, fd, device); 145 146 /* 147 * Allocate and initialize unit structure 148 */ 149 up = emalloc(sizeof(struct zyferunit)); 150 memset(up, 0, sizeof(struct zyferunit)); 151 pp = peer->procptr; 152 pp->io.clock_recv = zyfer_receive; 153 pp->io.srcclock = peer; 154 pp->io.datalen = 0; 155 pp->io.fd = fd; 156 if (!io_addclock(&pp->io)) { 157 close(fd); 158 pp->io.fd = -1; 159 free(up); 160 return (0); 161 } 162 pp->unitptr = up; 163 164 /* 165 * Initialize miscellaneous variables 166 */ 167 peer->precision = PRECISION; 168 pp->clockdesc = DESCRIPTION; 169 memcpy((char *)&pp->refid, REFID, 4); 170 up->pollcnt = 2; 171 up->polled = 0; /* May not be needed... */ 172 173 return (1); 174 } 175 176 177 /* 178 * zyfer_shutdown - shut down the clock 179 */ 180 static void 181 zyfer_shutdown( 182 int unit, 183 struct peer *peer 184 ) 185 { 186 register struct zyferunit *up; 187 struct refclockproc *pp; 188 189 pp = peer->procptr; 190 up = pp->unitptr; 191 if (pp->io.fd != -1) 192 io_closeclock(&pp->io); 193 if (up != NULL) 194 free(up); 195 } 196 197 198 /* 199 * zyfer_receive - receive data from the serial interface 200 */ 201 static void 202 zyfer_receive( 203 struct recvbuf *rbufp 204 ) 205 { 206 register struct zyferunit *up; 207 struct refclockproc *pp; 208 struct peer *peer; 209 int tmode; /* Time mode */ 210 int tfom; /* Time Figure Of Merit */ 211 int omode; /* Operation mode */ 212 u_char *p; 213 214 peer = rbufp->recv_peer; 215 pp = peer->procptr; 216 up = pp->unitptr; 217 p = (u_char *) &rbufp->recv_space; 218 /* 219 * If lencode is 0: 220 * - if *rbufp->recv_space is ! 221 * - - call refclock_gtlin to get things going 222 * - else flush 223 * else stuff it on the end of lastcode 224 * If we don't have LENZYFER bytes 225 * - wait for more data 226 * Crack the beast, and if it's OK, process it. 227 * 228 * We use refclock_gtlin() because we might use LDISC_CLK. 229 * 230 * Under FreeBSD, we get the ! followed by two 14-byte packets. 231 */ 232 233 if (pp->lencode >= LENZYFER) 234 pp->lencode = 0; 235 236 if (!pp->lencode) { 237 if (*p == '!') 238 pp->lencode = refclock_gtlin(rbufp, pp->a_lastcode, 239 BMAX, &pp->lastrec); 240 else 241 return; 242 } else { 243 memcpy(pp->a_lastcode + pp->lencode, p, rbufp->recv_length); 244 pp->lencode += rbufp->recv_length; 245 pp->a_lastcode[pp->lencode] = '\0'; 246 } 247 248 if (pp->lencode < LENZYFER) 249 return; 250 251 record_clock_stats(&peer->srcadr, pp->a_lastcode); 252 253 /* 254 * We get down to business, check the timecode format and decode 255 * its contents. If the timecode has invalid length or is not in 256 * proper format, we declare bad format and exit. 257 */ 258 259 if (pp->lencode != LENZYFER) { 260 refclock_report(peer, CEVNT_BADTIME); 261 return; 262 } 263 264 /* 265 * Timecode sample: "!TIME,2002,017,07,59,32,2,4,1" 266 */ 267 if (sscanf(pp->a_lastcode, "!TIME,%4d,%3d,%2d,%2d,%2d,%d,%d,%d", 268 &pp->year, &pp->day, &pp->hour, &pp->minute, &pp->second, 269 &tmode, &tfom, &omode) != 8) { 270 refclock_report(peer, CEVNT_BADREPLY); 271 return; 272 } 273 274 if (tmode != 2) { 275 refclock_report(peer, CEVNT_BADTIME); 276 return; 277 } 278 279 /* Should we make sure tfom is 4? */ 280 281 if (omode != 1) { 282 pp->leap = LEAP_NOTINSYNC; 283 return; 284 } 285 286 if (!refclock_process(pp)) { 287 refclock_report(peer, CEVNT_BADTIME); 288 return; 289 } 290 291 /* 292 * Good place for record_clock_stats() 293 */ 294 up->pollcnt = 2; 295 296 if (up->polled) { 297 up->polled = 0; 298 refclock_receive(peer); 299 } 300 } 301 302 303 /* 304 * zyfer_poll - called by the transmit procedure 305 */ 306 static void 307 zyfer_poll( 308 int unit, 309 struct peer *peer 310 ) 311 { 312 register struct zyferunit *up; 313 struct refclockproc *pp; 314 315 /* 316 * We don't really do anything here, except arm the receiving 317 * side to capture a sample and check for timeouts. 318 */ 319 pp = peer->procptr; 320 up = pp->unitptr; 321 if (!up->pollcnt) 322 refclock_report(peer, CEVNT_TIMEOUT); 323 else 324 up->pollcnt--; 325 pp->polls++; 326 up->polled = 1; 327 } 328 329 #else 330 int refclock_zyfer_bs; 331 #endif /* REFCLOCK */ 332