xref: /freebsd/sys/arm/conf/ZEDBOARD (revision d93a896e) 
1#
2# ZEDBOARD -- Custom configuration for the Xilinx Zynq-7000 based
3#             ZedBoard (www.zedboard.org) and similar Zynq boards.
4#
5# For more information on this file, please read the config(5) manual page,
6# and/or the handbook section on Kernel Configuration Files:
7#
8#    http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
9#
10# The handbook is also available locally in /usr/share/doc/handbook
11# if you've installed the doc distribution, otherwise always see the
12# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
13# latest information.
14#
15# An exhaustive list of options and more detailed explanations of the
16# device lines is also present in the ../../conf/NOTES and NOTES files.
17# If you are in doubt as to the purpose or necessity of a line, check first
18# in NOTES.
19#
20# $FreeBSD$
21
22ident		ZEDBOARD
23
24include 	"std.armv6"
25include 	"../xilinx/std.zynq7"
26
27makeoptions	MODULES_EXTRA="dtb/zynq"
28
29options 	SCHED_ULE		# ULE scheduler
30options 	PLATFORM		# Platform based SoC
31#options 	NFSSD			# Network Filesystem Server
32options 	SMP			# Enable multiple cores
33
34# NFS root from boopt/dhcp
35#options 	BOOTP
36#options 	BOOTP_NFSROOT
37#options 	BOOTP_COMPAT
38#options 	BOOTP_NFSV3
39
40options 	ROOTDEVNAME=\"ufs:mmcsd0s2a\"
41
42# Interrupt controller
43device		gic
44options 	INTRNG
45
46# Cache controller
47device		pl310			# PL310 L2 cache controller
48# ARM MPCore timer
49device		mpcore_timer
50
51device		loop
52device		random
53device		ether
54device		cgem			# Zynq-7000 gig ethernet device
55device		mii
56device		e1000phy
57device		rgephy			# Zybo uses Realtek RTL8211E
58device		pty
59device		uart
60device		gpio
61
62device		md
63device		mmc			# mmc/sd bus
64device		mmcsd			# mmc/sd flash cards
65device		sdhci			# generic sdhci
66device		bpf			# Berkeley packet filter
67
68# USB support
69device		usb
70device		ehci
71device		umass
72device		scbus			# SCSI bus (required for ATA/SCSI)
73device		da			# Direct Access (disks)
74device		axe			# USB-Ethernet
75
76
77# Flattened Device Tree
78options 	FDT			# Configure using FDT/DTB data
79#options 	FDT_DTB_STATIC
80#makeoptions	FDT_DTS_FILE=zedboard.dts
81
82