1 /*- 2 * Copyright (c) 2014 Ian Lepore 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 17 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 18 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 20 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 21 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 22 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 23 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 24 * SUCH DAMAGE. 25 * 26 * $FreeBSD$ 27 */ 28 29 /* 30 * Pin mux and pad control driver for imx5 and imx6. 31 * 32 * This driver implements the fdt_pinctrl interface for configuring the gpio and 33 * peripheral pins based on fdt configuration data. 34 * 35 * When the driver attaches, it walks the entire fdt tree and automatically 36 * configures the pins for each device which has a pinctrl-0 property and whose 37 * status is "okay". In addition it implements the fdt_pinctrl_configure() 38 * method which any other driver can call at any time to reconfigure its pins. 39 * 40 * The nature of the fsl,pins property in fdt data makes this driver's job very 41 * easy. Instead of representing each pin and pad configuration using symbolic 42 * properties such as pullup-enable="true" and so on, the data simply contains 43 * the addresses of the registers that control the pins, and the raw values to 44 * store in those registers. 45 * 46 * The imx5 and imx6 SoCs also have a small number of "general purpose 47 * registers" in the iomuxc device which are used to control an assortment 48 * of completely unrelated aspects of SoC behavior. This driver provides other 49 * drivers with direct access to those registers via simple accessor functions. 50 */ 51 52 #include <sys/param.h> 53 #include <sys/systm.h> 54 #include <sys/bus.h> 55 #include <sys/kernel.h> 56 #include <sys/module.h> 57 #include <sys/malloc.h> 58 #include <sys/rman.h> 59 60 #include <machine/bus.h> 61 #include <machine/fdt.h> 62 63 #include <dev/fdt/fdt_common.h> 64 #include <dev/fdt/fdt_pinctrl.h> 65 #include <dev/ofw/openfirm.h> 66 #include <dev/ofw/ofw_bus.h> 67 #include <dev/ofw/ofw_bus_subr.h> 68 69 #include <arm/freescale/imx/imx_iomuxvar.h> 70 #include <arm/freescale/imx/imx_machdep.h> 71 72 struct iomux_softc { 73 device_t dev; 74 struct resource *mem_res; 75 u_int last_gpreg; 76 }; 77 78 static struct iomux_softc *iomux_sc; 79 80 static struct ofw_compat_data compat_data[] = { 81 {"fsl,imx6dl-iomuxc", true}, 82 {"fsl,imx6q-iomuxc", true}, 83 {"fsl,imx6sl-iomuxc", true}, 84 {"fsl,imx6sx-iomuxc", true}, 85 {"fsl,imx53-iomuxc", true}, 86 {"fsl,imx51-iomuxc", true}, 87 {NULL, false}, 88 }; 89 90 /* 91 * Each tuple in an fsl,pins property contains these fields. 92 */ 93 struct pincfg { 94 uint32_t mux_reg; 95 uint32_t padconf_reg; 96 uint32_t input_reg; 97 uint32_t mux_val; 98 uint32_t input_val; 99 uint32_t padconf_val; 100 }; 101 102 #define PADCONF_NONE (1U << 31) /* Do not configure pad. */ 103 #define PADCONF_SION (1U << 30) /* Force SION bit in mux register. */ 104 #define PADMUX_SION (1U << 4) /* The SION bit in the mux register. */ 105 106 static inline uint32_t 107 RD4(struct iomux_softc *sc, bus_size_t off) 108 { 109 110 return (bus_read_4(sc->mem_res, off)); 111 } 112 113 static inline void 114 WR4(struct iomux_softc *sc, bus_size_t off, uint32_t val) 115 { 116 117 bus_write_4(sc->mem_res, off, val); 118 } 119 120 static int 121 iomux_configure_pins(device_t dev, phandle_t cfgxref) 122 { 123 struct iomux_softc * sc; 124 struct pincfg *cfgtuples, *cfg; 125 phandle_t cfgnode; 126 int i, ntuples; 127 uint32_t sion; 128 129 sc = device_get_softc(dev); 130 cfgnode = OF_node_from_xref(cfgxref); 131 ntuples = OF_getencprop_alloc(cfgnode, "fsl,pins", sizeof(*cfgtuples), 132 (void **)&cfgtuples); 133 if (ntuples < 0) 134 return (ENOENT); 135 if (ntuples == 0) 136 return (0); /* Empty property is not an error. */ 137 for (i = 0, cfg = cfgtuples; i < ntuples; i++, cfg++) { 138 sion = (cfg->padconf_val & PADCONF_SION) ? PADMUX_SION : 0; 139 WR4(sc, cfg->mux_reg, cfg->mux_val | sion); 140 if (cfg->input_reg != 0) 141 WR4(sc, cfg->input_reg, cfg->input_val); 142 if ((cfg->padconf_val & PADCONF_NONE) == 0) 143 WR4(sc, cfg->padconf_reg, cfg->padconf_val); 144 if (bootverbose) { 145 char name[32]; 146 OF_getprop(cfgnode, "name", &name, sizeof(name)); 147 printf("%16s: muxreg 0x%04x muxval 0x%02x " 148 "inpreg 0x%04x inpval 0x%02x " 149 "padreg 0x%04x padval 0x%08x\n", 150 name, cfg->mux_reg, cfg->mux_val | sion, 151 cfg->input_reg, cfg->input_val, 152 cfg->padconf_reg, cfg->padconf_val); 153 } 154 } 155 free(cfgtuples, M_OFWPROP); 156 return (0); 157 } 158 159 static int 160 iomux_probe(device_t dev) 161 { 162 163 if (!ofw_bus_status_okay(dev)) 164 return (ENXIO); 165 166 if (!ofw_bus_search_compatible(dev, compat_data)->ocd_data) 167 return (ENXIO); 168 169 device_set_desc(dev, "Freescale i.MX pin configuration"); 170 return (BUS_PROBE_DEFAULT); 171 } 172 173 static int 174 iomux_detach(device_t dev) 175 { 176 177 /* This device is always present. */ 178 return (EBUSY); 179 } 180 181 static int 182 iomux_attach(device_t dev) 183 { 184 struct iomux_softc * sc; 185 int rid; 186 187 sc = device_get_softc(dev); 188 sc->dev = dev; 189 190 switch (imx_soc_type()) { 191 case IMXSOC_51: 192 sc->last_gpreg = 1; 193 break; 194 case IMXSOC_53: 195 sc->last_gpreg = 2; 196 break; 197 case IMXSOC_6DL: 198 case IMXSOC_6S: 199 case IMXSOC_6SL: 200 case IMXSOC_6Q: 201 sc->last_gpreg = 13; 202 break; 203 default: 204 device_printf(dev, "Unknown SoC type\n"); 205 return (ENXIO); 206 } 207 208 rid = 0; 209 sc->mem_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid, 210 RF_ACTIVE); 211 if (sc->mem_res == NULL) { 212 device_printf(dev, "Cannot allocate memory resources\n"); 213 return (ENXIO); 214 } 215 216 iomux_sc = sc; 217 218 /* 219 * Register as a pinctrl device, and call the convenience function that 220 * walks the entire device tree invoking FDT_PINCTRL_CONFIGURE() on any 221 * pinctrl-0 property cells whose xref phandle refers to a configuration 222 * that is a child node of our node in the tree. 223 * 224 * The pinctrl bindings documentation specifically mentions that the 225 * pinctrl device itself may have a pinctrl-0 property which contains 226 * static configuration to be applied at device init time. The tree 227 * walk will automatically handle this for us when it passes through our 228 * node in the tree. 229 */ 230 fdt_pinctrl_register(dev, "fsl,pins"); 231 fdt_pinctrl_configure_tree(dev); 232 233 return (0); 234 } 235 236 uint32_t 237 imx_iomux_gpr_get(u_int regnum) 238 { 239 struct iomux_softc * sc; 240 241 sc = iomux_sc; 242 KASSERT(sc != NULL, ("%s called before attach", __FUNCTION__)); 243 KASSERT(regnum >= 0 && regnum <= sc->last_gpreg, 244 ("%s bad regnum %u, max %u", __FUNCTION__, regnum, sc->last_gpreg)); 245 246 return (RD4(iomux_sc, regnum * 4)); 247 } 248 249 void 250 imx_iomux_gpr_set(u_int regnum, uint32_t val) 251 { 252 struct iomux_softc * sc; 253 254 sc = iomux_sc; 255 KASSERT(sc != NULL, ("%s called before attach", __FUNCTION__)); 256 KASSERT(regnum >= 0 && regnum <= sc->last_gpreg, 257 ("%s bad regnum %u, max %u", __FUNCTION__, regnum, sc->last_gpreg)); 258 259 WR4(iomux_sc, regnum * 4, val); 260 } 261 262 void 263 imx_iomux_gpr_set_masked(u_int regnum, uint32_t clrbits, uint32_t setbits) 264 { 265 struct iomux_softc * sc; 266 uint32_t val; 267 268 sc = iomux_sc; 269 KASSERT(sc != NULL, ("%s called before attach", __FUNCTION__)); 270 KASSERT(regnum >= 0 && regnum <= sc->last_gpreg, 271 ("%s bad regnum %u, max %u", __FUNCTION__, regnum, sc->last_gpreg)); 272 273 val = RD4(iomux_sc, regnum * 4); 274 val = (val & ~clrbits) | setbits; 275 WR4(iomux_sc, regnum * 4, val); 276 } 277 278 static device_method_t imx_iomux_methods[] = { 279 /* Device interface */ 280 DEVMETHOD(device_probe, iomux_probe), 281 DEVMETHOD(device_attach, iomux_attach), 282 DEVMETHOD(device_detach, iomux_detach), 283 284 /* fdt_pinctrl interface */ 285 DEVMETHOD(fdt_pinctrl_configure,iomux_configure_pins), 286 287 DEVMETHOD_END 288 }; 289 290 static driver_t imx_iomux_driver = { 291 "imx_iomux", 292 imx_iomux_methods, 293 sizeof(struct iomux_softc), 294 }; 295 296 static devclass_t imx_iomux_devclass; 297 298 EARLY_DRIVER_MODULE(imx_iomux, simplebus, imx_iomux_driver, 299 imx_iomux_devclass, 0, 0, BUS_PASS_CPU + BUS_PASS_ORDER_LATE); 300 301