1# $FreeBSD$ 2# 3# On the handling of kernel options 4# 5# All kernel options should be listed in NOTES, with suitable 6# descriptions. Negative options (options that make some code not 7# compile) should be commented out; LINT (generated from NOTES) should 8# compile as much code as possible. Try to structure option-using 9# code so that a single option only switch code on, or only switch 10# code off, to make it possible to have a full compile-test. If 11# necessary, you can check for COMPILING_LINT to get maximum code 12# coverage. 13# 14# All new options shall also be listed in either "conf/options" or 15# "conf/options.<machine>". Options that affect a single source-file 16# <xxx>.[c|s] should be directed into "opt_<xxx>.h", while options 17# that affect multiple files should either go in "opt_global.h" if 18# this is a kernel-wide option (used just about everywhere), or in 19# "opt_<option-name-in-lower-case>.h" if it affects only some files. 20# Note that the effect of listing only an option without a 21# header-file-name in conf/options (and cousins) is that the last 22# convention is followed. 23# 24# This handling scheme is not yet fully implemented. 25# 26# 27# Format of this file: 28# Option name filename 29# 30# If filename is missing, the default is 31# opt_<name-of-option-in-lower-case>.h 32 33AAC_DEBUG opt_aac.h 34AACRAID_DEBUG opt_aacraid.h 35AHC_ALLOW_MEMIO opt_aic7xxx.h 36AHC_TMODE_ENABLE opt_aic7xxx.h 37AHC_DUMP_EEPROM opt_aic7xxx.h 38AHC_DEBUG opt_aic7xxx.h 39AHC_DEBUG_OPTS opt_aic7xxx.h 40AHC_REG_PRETTY_PRINT opt_aic7xxx.h 41AHD_DEBUG opt_aic79xx.h 42AHD_DEBUG_OPTS opt_aic79xx.h 43AHD_TMODE_ENABLE opt_aic79xx.h 44AHD_REG_PRETTY_PRINT opt_aic79xx.h 45ADW_ALLOW_MEMIO opt_adw.h 46 47TWA_DEBUG opt_twa.h 48 49# Debugging options. 50ALT_BREAK_TO_DEBUGGER opt_kdb.h 51BREAK_TO_DEBUGGER opt_kdb.h 52BUF_TRACKING opt_global.h 53DDB 54DDB_BUFR_SIZE opt_ddb.h 55DDB_CAPTURE_DEFAULTBUFSIZE opt_ddb.h 56DDB_CAPTURE_MAXBUFSIZE opt_ddb.h 57DDB_CTF opt_ddb.h 58DDB_NUMSYM opt_ddb.h 59FULL_BUF_TRACKING opt_global.h 60GDB 61KDB opt_global.h 62KDB_TRACE opt_kdb.h 63KDB_UNATTENDED opt_kdb.h 64KLD_DEBUG opt_kld.h 65SYSCTL_DEBUG opt_sysctl.h 66EARLY_PRINTF opt_global.h 67TEXTDUMP_PREFERRED opt_ddb.h 68TEXTDUMP_VERBOSE opt_ddb.h 69NUM_CORE_FILES opt_global.h 70TSLOG opt_global.h 71TSLOGSIZE opt_global.h 72 73# Miscellaneous options. 74ALQ 75ALTERA_SDCARD_FAST_SIM opt_altera_sdcard.h 76ATSE_CFI_HACK opt_cfi.h 77AUDIT opt_global.h 78BOOTHOWTO opt_global.h 79BOOTVERBOSE opt_global.h 80CALLOUT_PROFILING 81CAPABILITIES opt_capsicum.h 82CAPABILITY_MODE opt_capsicum.h 83COMPAT_43 opt_compat.h 84COMPAT_43TTY opt_compat.h 85COMPAT_FREEBSD4 opt_compat.h 86COMPAT_FREEBSD5 opt_compat.h 87COMPAT_FREEBSD6 opt_compat.h 88COMPAT_FREEBSD7 opt_compat.h 89COMPAT_FREEBSD9 opt_compat.h 90COMPAT_FREEBSD10 opt_compat.h 91COMPAT_FREEBSD11 opt_compat.h 92COMPAT_CLOUDABI32 opt_dontuse.h 93COMPAT_CLOUDABI64 opt_dontuse.h 94COMPAT_LINUXKPI opt_compat.h 95COMPILING_LINT opt_global.h 96CY_PCI_FASTINTR 97DEADLKRES opt_watchdog.h 98DEVICE_NUMA 99EXT_RESOURCES opt_global.h 100DIRECTIO 101FILEMON opt_dontuse.h 102FFCLOCK 103FULL_PREEMPTION opt_sched.h 104GZIO opt_gzio.h 105IMAGACT_BINMISC opt_dontuse.h 106IPI_PREEMPTION opt_sched.h 107GEOM_AES opt_geom.h 108GEOM_BDE opt_geom.h 109GEOM_BSD opt_geom.h 110GEOM_CACHE opt_geom.h 111GEOM_CONCAT opt_geom.h 112GEOM_ELI opt_geom.h 113GEOM_FOX opt_geom.h 114GEOM_GATE opt_geom.h 115GEOM_JOURNAL opt_geom.h 116GEOM_LABEL opt_geom.h 117GEOM_LABEL_GPT opt_geom.h 118GEOM_LINUX_LVM opt_geom.h 119GEOM_MAP opt_geom.h 120GEOM_MBR opt_geom.h 121GEOM_MIRROR opt_geom.h 122GEOM_MOUNTVER opt_geom.h 123GEOM_MULTIPATH opt_geom.h 124GEOM_NOP opt_geom.h 125GEOM_PART_APM opt_geom.h 126GEOM_PART_BSD opt_geom.h 127GEOM_PART_BSD64 opt_geom.h 128GEOM_PART_EBR opt_geom.h 129GEOM_PART_EBR_COMPAT opt_geom.h 130GEOM_PART_GPT opt_geom.h 131GEOM_PART_LDM opt_geom.h 132GEOM_PART_MBR opt_geom.h 133GEOM_PART_VTOC8 opt_geom.h 134GEOM_RAID opt_geom.h 135GEOM_RAID3 opt_geom.h 136GEOM_SHSEC opt_geom.h 137GEOM_STRIPE opt_geom.h 138GEOM_SUNLABEL opt_geom.h 139GEOM_UZIP opt_geom.h 140GEOM_UZIP_DEBUG opt_geom.h 141GEOM_VINUM opt_geom.h 142GEOM_VIRSTOR opt_geom.h 143GEOM_VOL opt_geom.h 144GEOM_ZERO opt_geom.h 145IFLIB opt_iflib.h 146KDTRACE_HOOKS opt_global.h 147KDTRACE_FRAME opt_kdtrace.h 148KN_HASHSIZE opt_kqueue.h 149KSTACK_MAX_PAGES 150KSTACK_PAGES 151KSTACK_USAGE_PROF 152KTRACE 153KTRACE_REQUEST_POOL opt_ktrace.h 154LIBICONV 155MAC opt_global.h 156MAC_BIBA opt_dontuse.h 157MAC_BSDEXTENDED opt_dontuse.h 158MAC_IFOFF opt_dontuse.h 159MAC_LOMAC opt_dontuse.h 160MAC_MLS opt_dontuse.h 161MAC_NONE opt_dontuse.h 162MAC_PARTITION opt_dontuse.h 163MAC_PORTACL opt_dontuse.h 164MAC_SEEOTHERUIDS opt_dontuse.h 165MAC_STATIC opt_mac.h 166MAC_STUB opt_dontuse.h 167MAC_TEST opt_dontuse.h 168MD_ROOT opt_md.h 169MD_ROOT_FSTYPE opt_md.h 170MD_ROOT_READONLY opt_md.h 171MD_ROOT_SIZE opt_md.h 172MFI_DEBUG opt_mfi.h 173MFI_DECODE_LOG opt_mfi.h 174MPROF_BUFFERS opt_mprof.h 175MPROF_HASH_SIZE opt_mprof.h 176NEW_PCIB opt_global.h 177NO_ADAPTIVE_MUTEXES opt_adaptive_mutexes.h 178NO_ADAPTIVE_RWLOCKS 179NO_ADAPTIVE_SX 180NO_EVENTTIMERS opt_timer.h 181NO_SYSCTL_DESCR opt_global.h 182NSWBUF_MIN opt_swap.h 183MBUF_PACKET_ZONE_DISABLE opt_global.h 184PANIC_REBOOT_WAIT_TIME opt_panic.h 185PCI_HP opt_pci.h 186PCI_IOV opt_global.h 187PPC_DEBUG opt_ppc.h 188PPC_PROBE_CHIPSET opt_ppc.h 189PPS_SYNC opt_ntp.h 190PREEMPTION opt_sched.h 191QUOTA 192SCHED_4BSD opt_sched.h 193SCHED_STATS opt_sched.h 194SCHED_ULE opt_sched.h 195SLEEPQUEUE_PROFILING 196SLHCI_DEBUG opt_slhci.h 197SPX_HACK 198STACK opt_stack.h 199SUIDDIR 200MSGMNB opt_sysvipc.h 201MSGMNI opt_sysvipc.h 202MSGSEG opt_sysvipc.h 203MSGSSZ opt_sysvipc.h 204MSGTQL opt_sysvipc.h 205SEMMNI opt_sysvipc.h 206SEMMNS opt_sysvipc.h 207SEMMNU opt_sysvipc.h 208SEMMSL opt_sysvipc.h 209SEMOPM opt_sysvipc.h 210SEMUME opt_sysvipc.h 211SHMALL opt_sysvipc.h 212SHMMAX opt_sysvipc.h 213SHMMAXPGS opt_sysvipc.h 214SHMMIN opt_sysvipc.h 215SHMMNI opt_sysvipc.h 216SHMSEG opt_sysvipc.h 217SYSVMSG opt_sysvipc.h 218SYSVSEM opt_sysvipc.h 219SYSVSHM opt_sysvipc.h 220SW_WATCHDOG opt_watchdog.h 221TURNSTILE_PROFILING 222UMTX_PROFILING 223UMTX_CHAINS opt_global.h 224VERBOSE_SYSINIT 225 226# POSIX kernel options 227P1003_1B_MQUEUE opt_posix.h 228P1003_1B_SEMAPHORES opt_posix.h 229_KPOSIX_PRIORITY_SCHEDULING opt_posix.h 230 231# Do we want the config file compiled into the kernel? 232INCLUDE_CONFIG_FILE opt_config.h 233 234# Options for static filesystems. These should only be used at config 235# time, since the corresponding lkms cannot work if there are any static 236# dependencies. Unusability is enforced by hiding the defines for the 237# options in a never-included header. 238AUTOFS opt_dontuse.h 239CD9660 opt_dontuse.h 240EXT2FS opt_dontuse.h 241FDESCFS opt_dontuse.h 242FFS opt_dontuse.h 243FUSE opt_dontuse.h 244MSDOSFS opt_dontuse.h 245NANDFS opt_dontuse.h 246NULLFS opt_dontuse.h 247PROCFS opt_dontuse.h 248PSEUDOFS opt_dontuse.h 249SMBFS opt_dontuse.h 250TMPFS opt_dontuse.h 251UDF opt_dontuse.h 252UNIONFS opt_dontuse.h 253ZFS opt_dontuse.h 254 255# Pseudofs debugging 256PSEUDOFS_TRACE opt_pseudofs.h 257 258# In-kernel GSS-API 259KGSSAPI opt_kgssapi.h 260KGSSAPI_DEBUG opt_kgssapi.h 261 262# These static filesystems have one slightly bogus static dependency in 263# sys/i386/i386/autoconf.c. If any of these filesystems are 264# statically compiled into the kernel, code for mounting them as root 265# filesystems will be enabled - but look below. 266# NFSCL - client 267# NFSD - server 268NFSCL opt_nfs.h 269NFSD opt_nfs.h 270 271# filesystems and libiconv bridge 272CD9660_ICONV opt_dontuse.h 273MSDOSFS_ICONV opt_dontuse.h 274UDF_ICONV opt_dontuse.h 275 276# If you are following the conditions in the copyright, 277# you can enable soft-updates which will speed up a lot of thigs 278# and make the system safer from crashes at the same time. 279# otherwise a STUB module will be compiled in. 280SOFTUPDATES opt_ffs.h 281 282# On small, embedded systems, it can be useful to turn off support for 283# snapshots. It saves about 30-40k for a feature that would be lightly 284# used, if it is used at all. 285NO_FFS_SNAPSHOT opt_ffs.h 286 287# Enabling this option turns on support for Access Control Lists in UFS, 288# which can be used to support high security configurations. Depends on 289# UFS_EXTATTR. 290UFS_ACL opt_ufs.h 291 292# Enabling this option turns on support for extended attributes in UFS-based 293# filesystems, which can be used to support high security configurations 294# as well as new filesystem features. 295UFS_EXTATTR opt_ufs.h 296UFS_EXTATTR_AUTOSTART opt_ufs.h 297 298# Enable fast hash lookups for large directories on UFS-based filesystems. 299UFS_DIRHASH opt_ufs.h 300 301# Enable gjournal-based UFS journal. 302UFS_GJOURNAL opt_ufs.h 303 304# The below sentence is not in English, and neither is this one. 305# We plan to remove the static dependences above, with a 306# <filesystem>_ROOT option to control if it usable as root. This list 307# allows these options to be present in config files already (though 308# they won't make any difference yet). 309NFS_ROOT opt_nfsroot.h 310 311# SMB/CIFS requester 312NETSMB opt_netsmb.h 313 314# Options used only in subr_param.c. 315HZ opt_param.h 316MAXFILES opt_param.h 317NBUF opt_param.h 318NSFBUFS opt_param.h 319VM_BCACHE_SIZE_MAX opt_param.h 320VM_SWZONE_SIZE_MAX opt_param.h 321MAXUSERS 322DFLDSIZ opt_param.h 323MAXDSIZ opt_param.h 324MAXSSIZ opt_param.h 325 326# Generic SCSI options. 327CAM_MAX_HIGHPOWER opt_cam.h 328CAMDEBUG opt_cam.h 329CAM_DEBUG_COMPILE opt_cam.h 330CAM_DEBUG_DELAY opt_cam.h 331CAM_DEBUG_BUS opt_cam.h 332CAM_DEBUG_TARGET opt_cam.h 333CAM_DEBUG_LUN opt_cam.h 334CAM_DEBUG_FLAGS opt_cam.h 335CAM_BOOT_DELAY opt_cam.h 336CAM_IOSCHED_DYNAMIC opt_cam.h 337SCSI_DELAY opt_scsi.h 338SCSI_NO_SENSE_STRINGS opt_scsi.h 339SCSI_NO_OP_STRINGS opt_scsi.h 340 341# Options used only in cam/ata/ata_da.c 342ADA_TEST_FAILURE opt_ada.h 343ATA_STATIC_ID opt_ada.h 344 345# Options used only in cam/scsi/scsi_cd.c 346CHANGER_MIN_BUSY_SECONDS opt_cd.h 347CHANGER_MAX_BUSY_SECONDS opt_cd.h 348 349# Options used only in cam/scsi/scsi_sa.c. 350SA_IO_TIMEOUT opt_sa.h 351SA_SPACE_TIMEOUT opt_sa.h 352SA_REWIND_TIMEOUT opt_sa.h 353SA_ERASE_TIMEOUT opt_sa.h 354SA_1FM_AT_EOD opt_sa.h 355 356# Options used only in cam/scsi/scsi_pt.c 357SCSI_PT_DEFAULT_TIMEOUT opt_pt.h 358 359# Options used only in cam/scsi/scsi_ses.c 360SES_ENABLE_PASSTHROUGH opt_ses.h 361 362# Options used in dev/sym/ (Symbios SCSI driver). 363SYM_SETUP_LP_PROBE_MAP opt_sym.h #-Low Priority Probe Map (bits) 364 # Allows the ncr to take precedence 365 # 1 (1<<0) -> 810a, 860 366 # 2 (1<<1) -> 825a, 875, 885, 895 367 # 4 (1<<2) -> 895a, 896, 1510d 368SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885 369 # disabled:0 (default), enabled:1 370SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking 371 # disabled:0, enabled:1 (default) 372SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported 373 # default:8, range:[1..64] 374 375# Options used only in dev/ncr/* 376SCSI_NCR_DEBUG opt_ncr.h 377SCSI_NCR_MAX_SYNC opt_ncr.h 378SCSI_NCR_MAX_WIDE opt_ncr.h 379SCSI_NCR_MYADDR opt_ncr.h 380 381# Options used only in dev/isp/* 382ISP_TARGET_MODE opt_isp.h 383ISP_FW_CRASH_DUMP opt_isp.h 384ISP_DEFAULT_ROLES opt_isp.h 385ISP_INTERNAL_TARGET opt_isp.h 386ISP_FCTAPE_OFF opt_isp.h 387 388# Options used only in dev/iscsi 389ISCSI_INITIATOR_DEBUG opt_iscsi_initiator.h 390 391# Net stuff. 392ACCEPT_FILTER_DATA 393ACCEPT_FILTER_DNS 394ACCEPT_FILTER_HTTP 395ALTQ opt_global.h 396ALTQ_CBQ opt_altq.h 397ALTQ_CDNR opt_altq.h 398ALTQ_CODEL opt_altq.h 399ALTQ_DEBUG opt_altq.h 400ALTQ_HFSC opt_altq.h 401ALTQ_FAIRQ opt_altq.h 402ALTQ_NOPCC opt_altq.h 403ALTQ_PRIQ opt_altq.h 404ALTQ_RED opt_altq.h 405ALTQ_RIO opt_altq.h 406BOOTP opt_bootp.h 407BOOTP_BLOCKSIZE opt_bootp.h 408BOOTP_COMPAT opt_bootp.h 409BOOTP_NFSROOT opt_bootp.h 410BOOTP_NFSV3 opt_bootp.h 411BOOTP_WIRED_TO opt_bootp.h 412DEVICE_POLLING 413DUMMYNET opt_ipdn.h 414RATELIMIT opt_ratelimit.h 415INET opt_inet.h 416INET6 opt_inet6.h 417IPDIVERT 418IPFILTER opt_ipfilter.h 419IPFILTER_DEFAULT_BLOCK opt_ipfilter.h 420IPFILTER_LOG opt_ipfilter.h 421IPFILTER_LOOKUP opt_ipfilter.h 422IPFIREWALL opt_ipfw.h 423IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h 424IPFIREWALL_NAT opt_ipfw.h 425IPFIREWALL_NAT64 opt_ipfw.h 426IPFIREWALL_NAT64_DIRECT_OUTPUT opt_ipfw.h 427IPFIREWALL_NPTV6 opt_ipfw.h 428IPFIREWALL_VERBOSE opt_ipfw.h 429IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h 430IPFIREWALL_PMOD opt_ipfw.h 431IPSEC opt_ipsec.h 432IPSEC_DEBUG opt_ipsec.h 433IPSEC_SUPPORT opt_ipsec.h 434IPSTEALTH 435KRPC 436LIBALIAS 437LIBMCHAIN 438MBUF_PROFILING 439MBUF_STRESS_TEST 440MROUTING opt_mrouting.h 441NFSLOCKD 442PCBGROUP opt_pcbgroup.h 443PF_DEFAULT_TO_DROP opt_pf.h 444RADIX_MPATH opt_mpath.h 445ROUTETABLES opt_route.h 446RSS opt_rss.h 447SLIP_IFF_OPTS opt_slip.h 448TCPDEBUG 449TCPPCAP opt_global.h 450SIFTR 451TCP_HHOOK opt_inet.h 452TCP_OFFLOAD opt_inet.h # Enable code to dispatch TCP offloading 453TCP_RFC7413 opt_inet.h 454TCP_RFC7413_MAX_KEYS opt_inet.h 455TCP_SIGNATURE opt_ipsec.h 456VLAN_ARRAY opt_vlan.h 457XBONEHACK 458 459# 460# SCTP 461# 462SCTP opt_sctp.h 463SCTP_DEBUG opt_sctp.h # Enable debug printfs 464SCTP_LOCK_LOGGING opt_sctp.h # Log to KTR lock activity 465SCTP_MBUF_LOGGING opt_sctp.h # Log to KTR general mbuf aloc/free 466SCTP_MBCNT_LOGGING opt_sctp.h # Log to KTR mbcnt activity 467SCTP_PACKET_LOGGING opt_sctp.h # Log to a packet buffer last N packets 468SCTP_LTRACE_CHUNKS opt_sctp.h # Log to KTR chunks processed 469SCTP_LTRACE_ERRORS opt_sctp.h # Log to KTR error returns. 470SCTP_USE_PERCPU_STAT opt_sctp.h # Use per cpu stats. 471SCTP_MCORE_INPUT opt_sctp.h # Have multiple input threads for input mbufs 472SCTP_LOCAL_TRACE_BUF opt_sctp.h # Use tracebuffer exported via sysctl 473SCTP_DETAILED_STR_STATS opt_sctp.h # Use per PR-SCTP policy stream stats 474# 475# 476# 477 478# Netgraph(4). Use option NETGRAPH to enable the base netgraph code. 479# Each netgraph node type can be either be compiled into the kernel 480# or loaded dynamically. To get the former, include the corresponding 481# option below. Each type has its own man page, e.g. ng_async(4). 482NETGRAPH 483NETGRAPH_DEBUG opt_netgraph.h 484NETGRAPH_ASYNC opt_netgraph.h 485NETGRAPH_ATMLLC opt_netgraph.h 486NETGRAPH_ATM_ATMPIF opt_netgraph.h 487NETGRAPH_BLUETOOTH opt_netgraph.h 488NETGRAPH_BLUETOOTH_BT3C opt_netgraph.h 489NETGRAPH_BLUETOOTH_H4 opt_netgraph.h 490NETGRAPH_BLUETOOTH_HCI opt_netgraph.h 491NETGRAPH_BLUETOOTH_L2CAP opt_netgraph.h 492NETGRAPH_BLUETOOTH_SOCKET opt_netgraph.h 493NETGRAPH_BLUETOOTH_UBT opt_netgraph.h 494NETGRAPH_BLUETOOTH_UBTBCMFW opt_netgraph.h 495NETGRAPH_BPF opt_netgraph.h 496NETGRAPH_BRIDGE opt_netgraph.h 497NETGRAPH_CAR opt_netgraph.h 498NETGRAPH_CISCO opt_netgraph.h 499NETGRAPH_DEFLATE opt_netgraph.h 500NETGRAPH_DEVICE opt_netgraph.h 501NETGRAPH_ECHO opt_netgraph.h 502NETGRAPH_EIFACE opt_netgraph.h 503NETGRAPH_ETHER opt_netgraph.h 504NETGRAPH_ETHER_ECHO opt_netgraph.h 505NETGRAPH_FEC opt_netgraph.h 506NETGRAPH_FRAME_RELAY opt_netgraph.h 507NETGRAPH_GIF opt_netgraph.h 508NETGRAPH_GIF_DEMUX opt_netgraph.h 509NETGRAPH_HOLE opt_netgraph.h 510NETGRAPH_IFACE opt_netgraph.h 511NETGRAPH_IP_INPUT opt_netgraph.h 512NETGRAPH_IPFW opt_netgraph.h 513NETGRAPH_KSOCKET opt_netgraph.h 514NETGRAPH_L2TP opt_netgraph.h 515NETGRAPH_LMI opt_netgraph.h 516NETGRAPH_MPPC_COMPRESSION opt_netgraph.h 517NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h 518NETGRAPH_NAT opt_netgraph.h 519NETGRAPH_NETFLOW opt_netgraph.h 520NETGRAPH_ONE2MANY opt_netgraph.h 521NETGRAPH_PATCH opt_netgraph.h 522NETGRAPH_PIPE opt_netgraph.h 523NETGRAPH_PPP opt_netgraph.h 524NETGRAPH_PPPOE opt_netgraph.h 525NETGRAPH_PPTPGRE opt_netgraph.h 526NETGRAPH_PRED1 opt_netgraph.h 527NETGRAPH_RFC1490 opt_netgraph.h 528NETGRAPH_SOCKET opt_netgraph.h 529NETGRAPH_SPLIT opt_netgraph.h 530NETGRAPH_SPPP opt_netgraph.h 531NETGRAPH_TAG opt_netgraph.h 532NETGRAPH_TCPMSS opt_netgraph.h 533NETGRAPH_TEE opt_netgraph.h 534NETGRAPH_TTY opt_netgraph.h 535NETGRAPH_UI opt_netgraph.h 536NETGRAPH_VJC opt_netgraph.h 537NETGRAPH_VLAN opt_netgraph.h 538 539# NgATM options 540NGATM_ATM opt_netgraph.h 541NGATM_ATMBASE opt_netgraph.h 542NGATM_SSCOP opt_netgraph.h 543NGATM_SSCFU opt_netgraph.h 544NGATM_UNI opt_netgraph.h 545NGATM_CCATM opt_netgraph.h 546 547# DRM options 548DRM_DEBUG opt_drm.h 549 550TI_SF_BUF_JUMBO opt_ti.h 551TI_JUMBO_HDRSPLIT opt_ti.h 552 553# DPT driver debug flags 554DPT_MEASURE_PERFORMANCE opt_dpt.h 555DPT_RESET_HBA opt_dpt.h 556 557# Misc debug flags. Most of these should probably be replaced with 558# 'DEBUG', and then let people recompile just the interesting modules 559# with 'make CC="cc -DDEBUG"'. 560CLUSTERDEBUG opt_debug_cluster.h 561DEBUG_1284 opt_ppb_1284.h 562VP0_DEBUG opt_vpo.h 563LPT_DEBUG opt_lpt.h 564PLIP_DEBUG opt_plip.h 565LOCKF_DEBUG opt_debug_lockf.h 566SI_DEBUG opt_debug_si.h 567IFMEDIA_DEBUG opt_ifmedia.h 568 569# Fb options 570FB_DEBUG opt_fb.h 571FB_INSTALL_CDEV opt_fb.h 572 573# ppbus related options 574PERIPH_1284 opt_ppb_1284.h 575DONTPROBE_1284 opt_ppb_1284.h 576 577# smbus related options 578ENABLE_ALART opt_intpm.h 579 580# These cause changes all over the kernel 581BLKDEV_IOSIZE opt_global.h 582BURN_BRIDGES opt_global.h 583DEBUG opt_global.h 584DEBUG_LOCKS opt_global.h 585DEBUG_VFS_LOCKS opt_global.h 586DFLTPHYS opt_global.h 587DIAGNOSTIC opt_global.h 588INVARIANT_SUPPORT opt_global.h 589INVARIANTS opt_global.h 590MAXCPU opt_global.h 591MAXMEMDOM opt_global.h 592MAXPHYS opt_global.h 593MCLSHIFT opt_global.h 594MUTEX_NOINLINE opt_global.h 595LOCK_PROFILING opt_global.h 596LOCK_PROFILING_FAST opt_global.h 597MSIZE opt_global.h 598REGRESSION opt_global.h 599RWLOCK_NOINLINE opt_global.h 600SX_NOINLINE opt_global.h 601VFS_BIO_DEBUG opt_global.h 602 603# These are VM related options 604VM_KMEM_SIZE opt_vm.h 605VM_KMEM_SIZE_SCALE opt_vm.h 606VM_KMEM_SIZE_MAX opt_vm.h 607VM_NRESERVLEVEL opt_vm.h 608VM_NUMA_ALLOC opt_vm.h 609VM_LEVEL_0_ORDER opt_vm.h 610NO_SWAPPING opt_vm.h 611MALLOC_MAKE_FAILURES opt_vm.h 612MALLOC_PROFILE opt_vm.h 613MALLOC_DEBUG_MAXZONES opt_vm.h 614 615# The MemGuard replacement allocator used for tamper-after-free detection 616DEBUG_MEMGUARD opt_vm.h 617 618# The RedZone malloc(9) protection 619DEBUG_REDZONE opt_vm.h 620 621# Standard SMP options 622EARLY_AP_STARTUP opt_global.h 623SMP opt_global.h 624 625# Size of the kernel message buffer 626MSGBUF_SIZE opt_msgbuf.h 627 628# NFS options 629NFS_MINATTRTIMO opt_nfs.h 630NFS_MAXATTRTIMO opt_nfs.h 631NFS_MINDIRATTRTIMO opt_nfs.h 632NFS_MAXDIRATTRTIMO opt_nfs.h 633NFS_DEBUG opt_nfs.h 634 635# For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver 636OVERRIDE_CARD opt_bktr.h 637OVERRIDE_TUNER opt_bktr.h 638OVERRIDE_DBX opt_bktr.h 639OVERRIDE_MSP opt_bktr.h 640BROOKTREE_SYSTEM_DEFAULT opt_bktr.h 641BROOKTREE_ALLOC_PAGES opt_bktr.h 642BKTR_OVERRIDE_CARD opt_bktr.h 643BKTR_OVERRIDE_TUNER opt_bktr.h 644BKTR_OVERRIDE_DBX opt_bktr.h 645BKTR_OVERRIDE_MSP opt_bktr.h 646BKTR_SYSTEM_DEFAULT opt_bktr.h 647BKTR_ALLOC_PAGES opt_bktr.h 648BKTR_USE_PLL opt_bktr.h 649BKTR_GPIO_ACCESS opt_bktr.h 650BKTR_NO_MSP_RESET opt_bktr.h 651BKTR_430_FX_MODE opt_bktr.h 652BKTR_SIS_VIA_MODE opt_bktr.h 653BKTR_USE_FREEBSD_SMBUS opt_bktr.h 654BKTR_NEW_MSP34XX_DRIVER opt_bktr.h 655 656# Options for uart(4) 657UART_PPS_ON_CTS opt_uart.h 658UART_POLL_FREQ opt_uart.h 659UART_DEV_TOLERANCE_PCT opt_uart.h 660 661# options for bus/device framework 662BUS_DEBUG opt_bus.h 663 664# options for USB support 665USB_DEBUG opt_usb.h 666USB_HOST_ALIGN opt_usb.h 667USB_REQ_DEBUG opt_usb.h 668USB_TEMPLATE opt_usb.h 669USB_VERBOSE opt_usb.h 670USB_DMA_SINGLE_ALLOC opt_usb.h 671USB_EHCI_BIG_ENDIAN_DESC opt_usb.h 672U3G_DEBUG opt_u3g.h 673UKBD_DFLT_KEYMAP opt_ukbd.h 674UPLCOM_INTR_INTERVAL opt_uplcom.h 675UVSCOM_DEFAULT_OPKTSIZE opt_uvscom.h 676UVSCOM_INTR_INTERVAL opt_uvscom.h 677 678# options for the Realtek rtwn driver 679RTWN_DEBUG opt_rtwn.h 680RTWN_WITHOUT_UCODE opt_rtwn.h 681 682# Embedded system options 683INIT_PATH 684 685ROOTDEVNAME 686 687FDC_DEBUG opt_fdc.h 688PCFCLOCK_VERBOSE opt_pcfclock.h 689PCFCLOCK_MAX_RETRIES opt_pcfclock.h 690 691KTR opt_global.h 692KTR_ALQ opt_ktr.h 693KTR_MASK opt_ktr.h 694KTR_CPUMASK opt_ktr.h 695KTR_COMPILE opt_global.h 696KTR_BOOT_ENTRIES opt_global.h 697KTR_ENTRIES opt_global.h 698KTR_VERBOSE opt_ktr.h 699WITNESS opt_global.h 700WITNESS_KDB opt_witness.h 701WITNESS_NO_VNODE opt_witness.h 702WITNESS_SKIPSPIN opt_witness.h 703WITNESS_COUNT opt_witness.h 704OPENSOLARIS_WITNESS opt_global.h 705 706# options for ACPI support 707ACPI_DEBUG opt_acpi.h 708ACPI_MAX_TASKS opt_acpi.h 709ACPI_MAX_THREADS opt_acpi.h 710ACPI_DMAR opt_acpi.h 711DEV_ACPI opt_acpi.h 712 713# ISA support 714DEV_ISA opt_isa.h 715ISAPNP opt_isa.h 716 717# various 'device presence' options. 718DEV_BPF opt_bpf.h 719DEV_CARP opt_carp.h 720DEV_NETMAP opt_global.h 721DEV_PCI opt_pci.h 722DEV_PF opt_pf.h 723DEV_PFLOG opt_pf.h 724DEV_PFSYNC opt_pf.h 725DEV_RANDOM opt_global.h 726DEV_SPLASH opt_splash.h 727DEV_VLAN opt_vlan.h 728 729# ed driver 730ED_HPP opt_ed.h 731ED_3C503 opt_ed.h 732ED_SIC opt_ed.h 733 734# bce driver 735BCE_DEBUG opt_bce.h 736BCE_NVRAM_WRITE_SUPPORT opt_bce.h 737 738SOCKBUF_DEBUG opt_global.h 739 740 741# options for ubsec driver 742UBSEC_DEBUG opt_ubsec.h 743UBSEC_RNDTEST opt_ubsec.h 744UBSEC_NO_RNG opt_ubsec.h 745 746# options for hifn driver 747HIFN_DEBUG opt_hifn.h 748HIFN_RNDTEST opt_hifn.h 749 750# options for safenet driver 751SAFE_DEBUG opt_safe.h 752SAFE_NO_RNG opt_safe.h 753SAFE_RNDTEST opt_safe.h 754 755# syscons/vt options 756MAXCONS opt_syscons.h 757SC_ALT_MOUSE_IMAGE opt_syscons.h 758SC_CUT_SPACES2TABS opt_syscons.h 759SC_CUT_SEPCHARS opt_syscons.h 760SC_DEBUG_LEVEL opt_syscons.h 761SC_DFLT_FONT opt_syscons.h 762SC_DISABLE_KDBKEY opt_syscons.h 763SC_DISABLE_REBOOT opt_syscons.h 764SC_HISTORY_SIZE opt_syscons.h 765SC_KERNEL_CONS_ATTR opt_syscons.h 766SC_KERNEL_CONS_REV_ATTR opt_syscons.h 767SC_MOUSE_CHAR opt_syscons.h 768SC_NO_CUTPASTE opt_syscons.h 769SC_NO_FONT_LOADING opt_syscons.h 770SC_NO_HISTORY opt_syscons.h 771SC_NO_MODE_CHANGE opt_syscons.h 772SC_NO_SUSPEND_VTYSWITCH opt_syscons.h 773SC_NO_SYSMOUSE opt_syscons.h 774SC_NORM_ATTR opt_syscons.h 775SC_NORM_REV_ATTR opt_syscons.h 776SC_PIXEL_MODE opt_syscons.h 777SC_RENDER_DEBUG opt_syscons.h 778SC_TWOBUTTON_MOUSE opt_syscons.h 779VT_ALT_TO_ESC_HACK opt_syscons.h 780VT_FB_DEFAULT_WIDTH opt_syscons.h 781VT_FB_DEFAULT_HEIGHT opt_syscons.h 782VT_MAXWINDOWS opt_syscons.h 783VT_TWOBUTTON_MOUSE opt_syscons.h 784DEV_SC opt_syscons.h 785DEV_VT opt_syscons.h 786 787# teken terminal emulator options 788TEKEN_CONS25 opt_teken.h 789TEKEN_UTF8 opt_teken.h 790TERMINAL_KERN_ATTR opt_teken.h 791TERMINAL_NORM_ATTR opt_teken.h 792 793# options for printf 794PRINTF_BUFR_SIZE opt_printf.h 795 796# kbd options 797KBD_DISABLE_KEYMAP_LOAD opt_kbd.h 798KBD_INSTALL_CDEV opt_kbd.h 799KBD_MAXRETRY opt_kbd.h 800KBD_MAXWAIT opt_kbd.h 801KBD_RESETDELAY opt_kbd.h 802KBDIO_DEBUG opt_kbd.h 803 804KBDMUX_DFLT_KEYMAP opt_kbdmux.h 805 806# options for the Atheros driver 807ATH_DEBUG opt_ath.h 808ATH_TXBUF opt_ath.h 809ATH_RXBUF opt_ath.h 810ATH_DIAGAPI opt_ath.h 811ATH_TX99_DIAG opt_ath.h 812ATH_ENABLE_11N opt_ath.h 813ATH_ENABLE_DFS opt_ath.h 814ATH_EEPROM_FIRMWARE opt_ath.h 815ATH_ENABLE_RADIOTAP_VENDOR_EXT opt_ath.h 816ATH_DEBUG_ALQ opt_ath.h 817ATH_KTR_INTR_DEBUG opt_ath.h 818 819# options for the Atheros hal 820AH_SUPPORT_AR5416 opt_ah.h 821# XXX For now, this breaks non-AR9130 chipsets, so only use it 822# XXX when actually targeting AR9130. 823AH_SUPPORT_AR9130 opt_ah.h 824 825# This is required for AR933x SoC support 826AH_SUPPORT_AR9330 opt_ah.h 827AH_SUPPORT_AR9340 opt_ah.h 828AH_SUPPORT_QCA9530 opt_ah.h 829AH_SUPPORT_QCA9550 opt_ah.h 830 831AH_DEBUG opt_ah.h 832AH_ASSERT opt_ah.h 833AH_DEBUG_ALQ opt_ah.h 834AH_REGOPS_FUNC opt_ah.h 835AH_WRITE_REGDOMAIN opt_ah.h 836AH_DEBUG_COUNTRY opt_ah.h 837AH_WRITE_EEPROM opt_ah.h 838AH_PRIVATE_DIAG opt_ah.h 839AH_NEED_DESC_SWAP opt_ah.h 840AH_USE_INIPDGAIN opt_ah.h 841AH_MAXCHAN opt_ah.h 842AH_RXCFG_SDMAMW_4BYTES opt_ah.h 843AH_INTERRUPT_DEBUGGING opt_ah.h 844# AR5416 and later interrupt mitigation 845# XXX do not use this for AR9130 846AH_AR5416_INTERRUPT_MITIGATION opt_ah.h 847 848# options for the Broadcom BCM43xx driver (bwi) 849BWI_DEBUG opt_bwi.h 850BWI_DEBUG_VERBOSE opt_bwi.h 851 852# options for the Brodacom BCM43xx driver (bwn) 853BWN_DEBUG opt_bwn.h 854BWN_GPL_PHY opt_bwn.h 855BWN_USE_SIBA opt_bwn.h 856 857# Options for the SIBA driver 858SIBA_DEBUG opt_siba.h 859 860# options for the Marvell 8335 wireless driver 861MALO_DEBUG opt_malo.h 862MALO_TXBUF opt_malo.h 863MALO_RXBUF opt_malo.h 864 865# options for the Marvell wireless driver 866MWL_DEBUG opt_mwl.h 867MWL_TXBUF opt_mwl.h 868MWL_RXBUF opt_mwl.h 869MWL_DIAGAPI opt_mwl.h 870MWL_AGGR_SIZE opt_mwl.h 871MWL_TX_NODROP opt_mwl.h 872 873# Options for the Marvell NETA driver 874MVNETA_MULTIQUEUE opt_mvneta.h 875MVNETA_KTR opt_mvneta.h 876 877# Options for the Intel 802.11ac wireless driver 878IWM_DEBUG opt_iwm.h 879 880# Options for the Intel 802.11n wireless driver 881IWN_DEBUG opt_iwn.h 882 883# Options for the Intel 3945ABG wireless driver 884WPI_DEBUG opt_wpi.h 885 886# dcons options 887DCONS_BUF_SIZE opt_dcons.h 888DCONS_POLL_HZ opt_dcons.h 889DCONS_FORCE_CONSOLE opt_dcons.h 890DCONS_FORCE_GDB opt_dcons.h 891 892# HWPMC options 893HWPMC_DEBUG opt_global.h 894HWPMC_HOOKS 895HWPMC_MIPS_BACKTRACE opt_hwpmc_hooks.h 896 897# Interrupt filtering 898INTR_FILTER 899 900# 802.11 support layer 901IEEE80211_DEBUG opt_wlan.h 902IEEE80211_DEBUG_REFCNT opt_wlan.h 903IEEE80211_AMPDU_AGE opt_wlan.h 904IEEE80211_SUPPORT_MESH opt_wlan.h 905IEEE80211_SUPPORT_SUPERG opt_wlan.h 906IEEE80211_SUPPORT_TDMA opt_wlan.h 907IEEE80211_ALQ opt_wlan.h 908IEEE80211_DFS_DEBUG opt_wlan.h 909 910# 802.11 TDMA support 911TDMA_SLOTLEN_DEFAULT opt_tdma.h 912TDMA_SLOTCNT_DEFAULT opt_tdma.h 913TDMA_BINTVAL_DEFAULT opt_tdma.h 914TDMA_TXRATE_11B_DEFAULT opt_tdma.h 915TDMA_TXRATE_11G_DEFAULT opt_tdma.h 916TDMA_TXRATE_11A_DEFAULT opt_tdma.h 917TDMA_TXRATE_TURBO_DEFAULT opt_tdma.h 918TDMA_TXRATE_HALF_DEFAULT opt_tdma.h 919TDMA_TXRATE_QUARTER_DEFAULT opt_tdma.h 920TDMA_TXRATE_11NA_DEFAULT opt_tdma.h 921TDMA_TXRATE_11NG_DEFAULT opt_tdma.h 922 923# VideoMode 924PICKMODE_DEBUG opt_videomode.h 925 926# Network stack virtualization options 927VIMAGE opt_global.h 928VNET_DEBUG opt_global.h 929 930# Common Flash Interface (CFI) options 931CFI_SUPPORT_STRATAFLASH opt_cfi.h 932CFI_ARMEDANDDANGEROUS opt_cfi.h 933CFI_HARDWAREBYTESWAP opt_cfi.h 934 935# Sound options 936SND_DEBUG opt_snd.h 937SND_DIAGNOSTIC opt_snd.h 938SND_FEEDER_MULTIFORMAT opt_snd.h 939SND_FEEDER_FULL_MULTIFORMAT opt_snd.h 940SND_FEEDER_RATE_HP opt_snd.h 941SND_PCM_64 opt_snd.h 942SND_OLDSTEREO opt_snd.h 943 944X86BIOS 945 946# Flattened device tree options 947FDT opt_platform.h 948FDT_DTB_STATIC opt_platform.h 949 950# OFED Infiniband stack 951OFED opt_ofed.h 952OFED_DEBUG_INIT opt_ofed.h 953SDP opt_ofed.h 954SDP_DEBUG opt_ofed.h 955IPOIB opt_ofed.h 956IPOIB_DEBUG opt_ofed.h 957IPOIB_CM opt_ofed.h 958 959# Resource Accounting 960RACCT opt_global.h 961RACCT_DEFAULT_TO_DISABLED opt_global.h 962 963# Resource Limits 964RCTL opt_global.h 965 966# Random number generator(s) 967# Which CSPRNG hash we get. 968# If Yarrow is not chosen, Fortuna is selected. 969RANDOM_YARROW opt_global.h 970# With this, no entropy processor is loaded, but the entropy 971# harvesting infrastructure is present. This means an entropy 972# processor may be loaded as a module. 973RANDOM_LOADABLE opt_global.h 974# This turns on high-rate and potentially expensive harvesting in 975# the uma slab allocator. 976RANDOM_ENABLE_UMA opt_global.h 977 978# BHND(4) driver 979BHND_LOGLEVEL opt_global.h 980 981# GPIO and child devices 982GPIO_SPI_DEBUG opt_gpio.h 983 984# etherswitch(4) driver 985RTL8366_SOFT_RESET opt_etherswitch.h 986 987# evdev protocol support 988EVDEV_SUPPORT opt_evdev.h 989EVDEV_DEBUG opt_evdev.h 990UINPUT_DEBUG opt_evdev.h 991 992# Hyper-V network driver 993HN_DEBUG opt_hn.h 994 995# CAM-based MMC stack 996MMCCAM 997# Encrypted kernel crash dumps 998EKCD opt_ekcd.h 999 1000# NVME options 1001NVME_USE_NVD opt_nvme.h 1002