1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/net/mediatek,star-emac.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: MediaTek STAR Ethernet MAC Controller
8
9maintainers:
10  - Bartosz Golaszewski <bgolaszewski@baylibre.com>
11
12description:
13  This Ethernet MAC is used on the MT8* family of SoCs from MediaTek.
14  It's compliant with 802.3 standards and supports half- and full-duplex
15  modes with flow-control as well as CRC offloading and VLAN tags.
16
17allOf:
18  - $ref: "ethernet-controller.yaml#"
19
20properties:
21  compatible:
22    enum:
23      - mediatek,mt8516-eth
24      - mediatek,mt8518-eth
25      - mediatek,mt8175-eth
26      - mediatek,mt8365-eth
27
28  reg:
29    maxItems: 1
30
31  interrupts:
32    maxItems: 1
33
34  clocks:
35    minItems: 3
36    maxItems: 3
37
38  clock-names:
39    additionalItems: false
40    items:
41      - const: core
42      - const: reg
43      - const: trans
44
45  mediatek,pericfg:
46    $ref: /schemas/types.yaml#/definitions/phandle
47    description:
48      Phandle to the device containing the PERICFG register range. This is used
49      to control the MII mode.
50
51  mediatek,rmii-rxc:
52    type: boolean
53    description:
54      If present, indicates that the RMII reference clock, which is from external
55      PHYs, is connected to RXC pin. Otherwise, is connected to TXC pin.
56
57  mediatek,rxc-inverse:
58    type: boolean
59    description:
60      If present, indicates that clock on RXC pad will be inversed.
61
62  mediatek,txc-inverse:
63    type: boolean
64    description:
65      If present, indicates that clock on TXC pad will be inversed.
66
67  mdio:
68    $ref: mdio.yaml#
69    unevaluatedProperties: false
70
71required:
72  - compatible
73  - reg
74  - interrupts
75  - clocks
76  - clock-names
77  - mediatek,pericfg
78  - phy-handle
79
80unevaluatedProperties: false
81
82examples:
83  - |
84    #include <dt-bindings/interrupt-controller/arm-gic.h>
85    #include <dt-bindings/clock/mt8516-clk.h>
86
87    ethernet: ethernet@11180000 {
88        compatible = "mediatek,mt8516-eth";
89        reg = <0x11180000 0x1000>;
90        mediatek,pericfg = <&pericfg>;
91        interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_LOW>;
92        clocks = <&topckgen CLK_TOP_RG_ETH>,
93                 <&topckgen CLK_TOP_66M_ETH>,
94                 <&topckgen CLK_TOP_133M_ETH>;
95        clock-names = "core", "reg", "trans";
96        phy-handle = <&eth_phy>;
97        phy-mode = "rmii";
98
99        mdio {
100            #address-cells = <1>;
101            #size-cells = <0>;
102
103            eth_phy: ethernet-phy@0 {
104                reg = <0>;
105            };
106        };
107    };
108