1TI Wilink 6/7/8 (wl12xx/wl18xx) SDIO devices
2
3This node provides properties for controlling the wilink wireless device. The
4node is expected to be specified as a child node to the SDIO controller that
5connects the device to the system.
6
7Required properties:
8 - compatible: should be one of the following:
9    * "ti,wl1271"
10    * "ti,wl1273"
11    * "ti,wl1281"
12    * "ti,wl1283"
13    * "ti,wl1285"
14    * "ti,wl1801"
15    * "ti,wl1805"
16    * "ti,wl1807"
17    * "ti,wl1831"
18    * "ti,wl1835"
19    * "ti,wl1837"
20 - interrupts : specifies attributes for the out-of-band interrupt.
21
22Optional properties:
23 - ref-clock-frequency : ref clock frequency in Hz
24 - tcxo-clock-frequency : tcxo clock frequency in Hz
25
26Note: the *-clock-frequency properties assume internal clocks. In case of external
27clock, new bindings (for parsing the clock nodes) have to be added.
28
29Example:
30
31&mmc3 {
32	vmmc-supply = <&wlan_en_reg>;
33	bus-width = <4>;
34	cap-power-off-card;
35	keep-power-in-suspend;
36
37	#address-cells = <1>;
38	#size-cells = <0>;
39	wlcore: wlcore@2 {
40		compatible = "ti,wl1835";
41		reg = <2>;
42		interrupt-parent = <&gpio0>;
43		interrupts = <19 IRQ_TYPE_LEVEL_HIGH>;
44	};
45};
46