1MVEBU comphy drivers
2--------------------
3
4COMPHY controllers can be found on the following Marvell MVEBU SoCs:
5* Armada 7k/8k (on the CP110)
6* Armada 3700
7It provides a number of shared PHYs used by various interfaces (network, SATA,
8USB, PCIe...).
9
10Required properties:
11
12- compatible: should be one of:
13  * "marvell,comphy-cp110" for Armada 7k/8k
14  * "marvell,comphy-a3700" for Armada 3700
15- reg: should contain the COMPHY register(s) location(s) and length(s).
16  * 1 entry for Armada 7k/8k
17  * 4 entries for Armada 3700 along with the corresponding reg-names
18    properties, memory areas are:
19    * Generic COMPHY registers
20    * Lane 1 (PCIe/GbE)
21    * Lane 0 (USB3/GbE)
22    * Lane 2 (SATA/USB3)
23- marvell,system-controller: should contain a phandle to the system
24			     controller node (only for Armada 7k/8k)
25- #address-cells: should be 1.
26- #size-cells: should be 0.
27
28Optional properlties:
29
30- clocks: pointers to the reference clocks for this device (CP110 only),
31          consequently: MG clock, MG Core clock, AXI clock.
32- clock-names: names of used clocks for CP110 only, must be :
33               "mg_clk", "mg_core_clk" and "axi_clk".
34
35A sub-node is required for each comphy lane provided by the comphy.
36
37Required properties (child nodes):
38
39- reg: COMPHY lane number.
40- #phy-cells : from the generic PHY bindings, must be 1. Defines the
41               input port to use for a given comphy lane.
42
43Examples:
44
45	CP11X_LABEL(comphy): phy@120000 {
46		compatible = "marvell,comphy-cp110";
47		reg = <0x120000 0x6000>;
48		marvell,system-controller = <&CP11X_LABEL(syscon0)>;
49		clocks = <&CP11X_LABEL(clk) 1 5>, <&CP11X_LABEL(clk) 1 6>,
50			 <&CP11X_LABEL(clk) 1 18>;
51		clock-names = "mg_clk", "mg_core_clk", "axi_clk";
52		#address-cells = <1>;
53		#size-cells = <0>;
54
55		CP11X_LABEL(comphy0): phy@0 {
56			reg = <0>;
57			#phy-cells = <1>;
58		};
59
60		CP11X_LABEL(comphy1): phy@1 {
61			reg = <1>;
62			#phy-cells = <1>;
63		};
64	};
65
66	comphy: phy@18300 {
67		compatible = "marvell,comphy-a3700";
68		reg = <0x18300 0x300>,
69		<0x1F000 0x400>,
70		<0x5C000 0x400>,
71		<0xe0178 0x8>;
72		reg-names = "comphy",
73		"lane1_pcie_gbe",
74		"lane0_usb3_gbe",
75		"lane2_sata_usb3";
76		#address-cells = <1>;
77		#size-cells = <0>;
78
79
80		comphy0: phy@0 {
81			reg = <0>;
82			#phy-cells = <1>;
83		};
84
85		comphy1: phy@1 {
86			reg = <1>;
87			#phy-cells = <1>;
88		};
89
90		comphy2: phy@2 {
91			reg = <2>;
92			#phy-cells = <1>;
93		};
94	};
95