1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Qualcomm SM8450 SoC LPASS LPI TLMM
8
9maintainers:
10  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
11
12description:
13  Top Level Mode Multiplexer pin controller in the Low Power Audio SubSystem
14  (LPASS) Low Power Island (LPI) of Qualcomm SM8450 SoC.
15
16properties:
17  compatible:
18    const: qcom,sm8450-lpass-lpi-pinctrl
19
20  reg:
21    items:
22      - description: LPASS LPI TLMM Control and Status registers
23      - description: LPASS LPI MCC registers
24
25  clocks:
26    items:
27      - description: LPASS Core voting clock
28      - description: LPASS Audio voting clock
29
30  clock-names:
31    items:
32      - const: core
33      - const: audio
34
35  gpio-controller: true
36
37  "#gpio-cells":
38    description: Specifying the pin number and flags, as defined in
39      include/dt-bindings/gpio/gpio.h
40    const: 2
41
42  gpio-ranges:
43    maxItems: 1
44
45patternProperties:
46  "-state$":
47    oneOf:
48      - $ref: "#/$defs/qcom-sm8450-lpass-state"
49      - patternProperties:
50          "-pins$":
51            $ref: "#/$defs/qcom-sm8450-lpass-state"
52        additionalProperties: false
53
54$defs:
55  qcom-sm8450-lpass-state:
56    type: object
57    description:
58      Pinctrl node's client devices use subnodes for desired pin configuration.
59      Client device subnodes use below standard properties.
60    $ref: /schemas/pinctrl/pincfg-node.yaml
61
62    properties:
63      pins:
64        description:
65          List of gpio pins affected by the properties specified in this
66          subnode.
67        items:
68          pattern: "^gpio([0-9]|1[0-9]|2[0-2])$"
69
70      function:
71        enum: [ swr_tx_clk, swr_tx_data, swr_rx_clk, swr_rx_data,
72                dmic1_clk, dmic1_data, dmic2_clk, dmic2_data, dmic4_clk,
73                dmic4_data, i2s2_clk, i2s2_ws, dmic3_clk, dmic3_data,
74                qua_mi2s_sclk, qua_mi2s_ws, qua_mi2s_data, i2s1_clk, i2s1_ws,
75                i2s1_data, wsa_swr_clk, wsa_swr_data, wsa2_swr_clk,
76                wsa2_swr_data, i2s2_data, i2s4_ws, i2s4_clk, i2s4_data,
77                slimbus_clk, i2s3_clk, i2s3_ws, i2s3_data, slimbus_data,
78                ext_mclk1_c, ext_mclk1_b, ext_mclk1_a, ext_mclk1_d,
79                ext_mclk1_e ]
80        description:
81          Specify the alternative function to be configured for the specified
82          pins.
83
84      drive-strength:
85        enum: [2, 4, 6, 8, 10, 12, 14, 16]
86        default: 2
87        description:
88          Selects the drive strength for the specified pins, in mA.
89
90      slew-rate:
91        enum: [0, 1, 2, 3]
92        default: 0
93        description: |
94          0: No adjustments
95          1: Higher Slew rate (faster edges)
96          2: Lower Slew rate (slower edges)
97          3: Reserved (No adjustments)
98
99      bias-bus-hold: true
100      bias-pull-down: true
101      bias-pull-up: true
102      bias-disable: true
103      input-enable: true
104      output-high: true
105      output-low: true
106
107    required:
108      - pins
109      - function
110
111    additionalProperties: false
112
113allOf:
114  - $ref: pinctrl.yaml#
115
116required:
117  - compatible
118  - reg
119  - clocks
120  - clock-names
121  - gpio-controller
122  - "#gpio-cells"
123  - gpio-ranges
124
125additionalProperties: false
126
127examples:
128  - |
129    #include <dt-bindings/sound/qcom,q6afe.h>
130    pinctrl@3440000 {
131        compatible = "qcom,sm8450-lpass-lpi-pinctrl";
132        reg = <0x3440000 0x20000>,
133              <0x34d0000 0x10000>;
134        clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
135                 <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
136        clock-names = "core", "audio";
137        gpio-controller;
138        #gpio-cells = <2>;
139        gpio-ranges = <&lpi_tlmm 0 0 23>;
140
141        wsa-swr-active-state {
142            clk-pins {
143                pins = "gpio10";
144                function = "wsa_swr_clk";
145                drive-strength = <2>;
146                slew-rate = <1>;
147                bias-disable;
148            };
149
150            data-pins {
151                pins = "gpio11";
152                function = "wsa_swr_data";
153                drive-strength = <2>;
154                slew-rate = <1>;
155            };
156        };
157
158        tx-swr-sleep-clk-state {
159            pins = "gpio0";
160            function = "swr_tx_clk";
161            drive-strength = <2>;
162            bias-pull-down;
163        };
164    };
165