1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries.
4 */
5
6#include <dt-bindings/gpio/gpio.h>
7#include <dt-bindings/interrupt-controller/arm-gic.h>
8#include <dt-bindings/clock/microchip,sparx5.h>
9
10/ {
11	compatible = "microchip,sparx5";
12	interrupt-parent = <&gic>;
13	#address-cells = <2>;
14	#size-cells = <1>;
15
16	aliases {
17		spi0 = &spi0;
18		serial0 = &uart0;
19		serial1 = &uart1;
20	};
21
22	chosen {
23		stdout-path = "serial0:115200n8";
24	};
25
26	cpus {
27		#address-cells = <2>;
28		#size-cells = <0>;
29		cpu-map {
30			cluster0 {
31				core0 {
32					cpu = <&cpu0>;
33				};
34				core1 {
35					cpu = <&cpu1>;
36				};
37			};
38		};
39		cpu0: cpu@0 {
40			compatible = "arm,cortex-a53";
41			device_type = "cpu";
42			reg = <0x0 0x0>;
43			enable-method = "psci";
44			next-level-cache = <&L2_0>;
45		};
46		cpu1: cpu@1 {
47			compatible = "arm,cortex-a53";
48			device_type = "cpu";
49			reg = <0x0 0x1>;
50			enable-method = "psci";
51			next-level-cache = <&L2_0>;
52		};
53		L2_0: l2-cache0 {
54			compatible = "cache";
55		};
56	};
57
58	arm-pmu {
59		compatible = "arm,cortex-a53-pmu";
60		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
61		interrupt-affinity = <&cpu0>, <&cpu1>;
62	};
63
64	psci {
65		compatible = "arm,psci-0.2";
66		method = "smc";
67	};
68
69	timer {
70		compatible = "arm,armv8-timer";
71		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
72			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
73			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
74			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
75	};
76
77	lcpll_clk: lcpll-clk {
78		compatible = "fixed-clock";
79		#clock-cells = <0>;
80		clock-frequency = <2500000000>;
81	};
82
83	clks: clock-controller@61110000c {
84		compatible = "microchip,sparx5-dpll";
85		#clock-cells = <1>;
86		clocks = <&lcpll_clk>;
87		reg = <0x6 0x1110000c 0x24>;
88	};
89
90	ahb_clk: ahb-clk {
91		compatible = "fixed-clock";
92		#clock-cells = <0>;
93		clock-frequency = <250000000>;
94	};
95
96	sys_clk: sys-clk {
97		compatible = "fixed-clock";
98		#clock-cells = <0>;
99		clock-frequency = <625000000>;
100	};
101
102	axi: axi@600000000 {
103		compatible = "simple-bus";
104		#address-cells = <2>;
105		#size-cells = <1>;
106		ranges;
107
108		gic: interrupt-controller@600300000 {
109			compatible = "arm,gic-v3";
110			#interrupt-cells = <3>;
111			#address-cells = <2>;
112			#size-cells = <2>;
113			interrupt-controller;
114			reg = <0x6 0x00300000 0x10000>,	/* GIC Dist */
115			      <0x6 0x00340000 0xc0000>,	/* GICR */
116			      <0x6 0x00200000 0x2000>,	/* GICC */
117			      <0x6 0x00210000 0x2000>,  /* GICV */
118			      <0x6 0x00220000 0x2000>;  /* GICH */
119			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
120		};
121
122		cpu_ctrl: syscon@600000000 {
123			compatible = "microchip,sparx5-cpu-syscon", "syscon",
124				     "simple-mfd";
125			reg = <0x6 0x00000000 0xd0>;
126			mux: mux-controller {
127				compatible = "mmio-mux";
128				#mux-control-cells = <0>;
129				/*
130				 * SI_OWNER and SI2_OWNER in GENERAL_CTRL
131				 * SPI:  value 9 - (SIMC,SIBM) = 0b1001
132				 * SPI2: value 6 - (SIBM,SIMC) = 0b0110
133				 */
134				mux-reg-masks = <0x88 0xf0>;
135			};
136		};
137
138		reset: reset-controller@611010008 {
139			compatible = "microchip,sparx5-switch-reset";
140			reg = <0x6 0x11010008 0x4>;
141			reg-names = "gcb";
142			#reset-cells = <1>;
143			cpu-syscon = <&cpu_ctrl>;
144		};
145
146		uart0: serial@600100000 {
147			pinctrl-0 = <&uart_pins>;
148			pinctrl-names = "default";
149			compatible = "ns16550a";
150			reg = <0x6 0x00100000 0x20>;
151			clocks = <&ahb_clk>;
152			reg-io-width = <4>;
153			reg-shift = <2>;
154			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
155
156			status = "disabled";
157		};
158
159		uart1: serial@600102000 {
160			pinctrl-0 = <&uart2_pins>;
161			pinctrl-names = "default";
162			compatible = "ns16550a";
163			reg = <0x6 0x00102000 0x20>;
164			clocks = <&ahb_clk>;
165			reg-io-width = <4>;
166			reg-shift = <2>;
167			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
168
169			status = "disabled";
170		};
171
172		spi0: spi@600104000 {
173			#address-cells = <1>;
174			#size-cells = <0>;
175			compatible = "microchip,sparx5-spi";
176			reg = <0x6 0x00104000 0x40>;
177			num-cs = <16>;
178			reg-io-width = <4>;
179			reg-shift = <2>;
180			clocks = <&ahb_clk>;
181			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
182			status = "disabled";
183		};
184
185		timer1: timer@600105000 {
186			compatible = "snps,dw-apb-timer";
187			reg = <0x6 0x00105000 0x1000>;
188			clocks = <&ahb_clk>;
189			clock-names = "timer";
190			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
191		};
192
193		sdhci0: mmc@600800000 {
194			compatible = "microchip,dw-sparx5-sdhci";
195			status = "disabled";
196			reg = <0x6 0x00800000 0x1000>;
197			pinctrl-0 = <&emmc_pins>;
198			pinctrl-names = "default";
199			clocks = <&clks CLK_ID_AUX1>;
200			clock-names = "core";
201			assigned-clocks = <&clks CLK_ID_AUX1>;
202			assigned-clock-rates = <800000000>;
203			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
204			bus-width = <8>;
205		};
206
207		gpio: pinctrl@6110101e0 {
208			compatible = "microchip,sparx5-pinctrl";
209			reg = <0x6 0x110101e0 0x90>, <0x6 0x10508010 0x100>;
210			gpio-controller;
211			#gpio-cells = <2>;
212			gpio-ranges = <&gpio 0 0 64>;
213			interrupt-controller;
214			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
215			#interrupt-cells = <2>;
216
217			cs1_pins: cs1-pins {
218				pins = "GPIO_16";
219				function = "si";
220			};
221
222			cs2_pins: cs2-pins {
223				pins = "GPIO_17";
224				function = "si";
225			};
226
227			cs3_pins: cs3-pins {
228				pins = "GPIO_18";
229				function = "si";
230			};
231
232			si2_pins: si2-pins {
233				pins = "GPIO_39", "GPIO_40", "GPIO_41";
234				function = "si2";
235			};
236
237			sgpio0_pins: sgpio-pins {
238				pins = "GPIO_0", "GPIO_1", "GPIO_2", "GPIO_3";
239				function = "sg0";
240			};
241
242			sgpio1_pins: sgpio1-pins {
243				pins = "GPIO_4", "GPIO_5", "GPIO_12", "GPIO_13";
244				function = "sg1";
245			};
246
247			sgpio2_pins: sgpio2-pins {
248				pins = "GPIO_30", "GPIO_31", "GPIO_32",
249				       "GPIO_33";
250				function = "sg2";
251			};
252
253			uart_pins: uart-pins {
254				pins = "GPIO_10", "GPIO_11";
255				function = "uart";
256			};
257
258			uart2_pins: uart2-pins {
259				pins = "GPIO_26", "GPIO_27";
260				function = "uart2";
261			};
262
263			i2c_pins: i2c-pins {
264				pins = "GPIO_14", "GPIO_15";
265				function = "twi";
266			};
267
268			i2c2_pins: i2c2-pins {
269				pins = "GPIO_28", "GPIO_29";
270				function = "twi2";
271			};
272
273			emmc_pins: emmc-pins {
274				pins = "GPIO_34", "GPIO_35", "GPIO_36",
275					"GPIO_37", "GPIO_38", "GPIO_39",
276					"GPIO_40", "GPIO_41", "GPIO_42",
277					"GPIO_43", "GPIO_44", "GPIO_45",
278					"GPIO_46", "GPIO_47";
279				function = "emmc";
280			};
281
282			miim1_pins: miim1-pins {
283				pins = "GPIO_56", "GPIO_57";
284				function = "miim";
285			};
286
287			miim2_pins: miim2-pins {
288				pins = "GPIO_58", "GPIO_59";
289				function = "miim";
290			};
291
292			miim3_pins: miim3-pins {
293				pins = "GPIO_52", "GPIO_53";
294				function = "miim";
295			};
296		};
297
298		sgpio0: gpio@61101036c {
299			#address-cells = <1>;
300			#size-cells = <0>;
301			compatible = "microchip,sparx5-sgpio";
302			status = "disabled";
303			clocks = <&sys_clk>;
304			pinctrl-0 = <&sgpio0_pins>;
305			pinctrl-names = "default";
306			resets = <&reset 0>;
307			reset-names = "switch";
308			reg = <0x6 0x1101036c 0x100>;
309			sgpio_in0: gpio@0 {
310				compatible = "microchip,sparx5-sgpio-bank";
311				reg = <0>;
312				gpio-controller;
313				#gpio-cells = <3>;
314				ngpios = <96>;
315				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
316				interrupt-controller;
317				#interrupt-cells = <3>;
318			};
319			sgpio_out0: gpio@1 {
320				compatible = "microchip,sparx5-sgpio-bank";
321				reg = <1>;
322				gpio-controller;
323				#gpio-cells = <3>;
324				ngpios = <96>;
325			};
326		};
327
328		sgpio1: gpio@611010484 {
329			#address-cells = <1>;
330			#size-cells = <0>;
331			compatible = "microchip,sparx5-sgpio";
332			status = "disabled";
333			clocks = <&sys_clk>;
334			pinctrl-0 = <&sgpio1_pins>;
335			pinctrl-names = "default";
336			resets = <&reset 0>;
337			reset-names = "switch";
338			reg = <0x6 0x11010484 0x100>;
339			sgpio_in1: gpio@0 {
340				compatible = "microchip,sparx5-sgpio-bank";
341				reg = <0>;
342				gpio-controller;
343				#gpio-cells = <3>;
344				ngpios = <96>;
345				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
346				interrupt-controller;
347				#interrupt-cells = <3>;
348			};
349			sgpio_out1: gpio@1 {
350				compatible = "microchip,sparx5-sgpio-bank";
351				reg = <1>;
352				gpio-controller;
353				#gpio-cells = <3>;
354				ngpios = <96>;
355			};
356		};
357
358		sgpio2: gpio@61101059c {
359			#address-cells = <1>;
360			#size-cells = <0>;
361			compatible = "microchip,sparx5-sgpio";
362			status = "disabled";
363			clocks = <&sys_clk>;
364			pinctrl-0 = <&sgpio2_pins>;
365			pinctrl-names = "default";
366			resets = <&reset 0>;
367			reset-names = "switch";
368			reg = <0x6 0x1101059c 0x100>;
369			sgpio_in2: gpio@0 {
370				reg = <0>;
371				compatible = "microchip,sparx5-sgpio-bank";
372				gpio-controller;
373				#gpio-cells = <3>;
374				ngpios = <96>;
375				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
376				interrupt-controller;
377				#interrupt-cells = <3>;
378			};
379			sgpio_out2: gpio@1 {
380				compatible = "microchip,sparx5-sgpio-bank";
381				reg = <1>;
382				gpio-controller;
383				#gpio-cells = <3>;
384				ngpios = <96>;
385			};
386		};
387
388		i2c0: i2c@600101000 {
389			compatible = "snps,designware-i2c";
390			status = "disabled";
391			pinctrl-0 = <&i2c_pins>;
392			pinctrl-names = "default";
393			reg = <0x6 0x00101000 0x100>;
394			#address-cells = <1>;
395			#size-cells = <0>;
396			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
397			i2c-sda-hold-time-ns = <300>;
398			clock-frequency = <100000>;
399			clocks = <&ahb_clk>;
400		};
401
402		i2c1: i2c@600103000 {
403			compatible = "snps,designware-i2c";
404			status = "disabled";
405			pinctrl-0 = <&i2c2_pins>;
406			pinctrl-names = "default";
407			reg = <0x6 0x00103000 0x100>;
408			#address-cells = <1>;
409			#size-cells = <0>;
410			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
411			i2c-sda-hold-time-ns = <300>;
412			clock-frequency = <100000>;
413			clocks = <&ahb_clk>;
414		};
415
416		tmon0: tmon@610508110 {
417			compatible = "microchip,sparx5-temp";
418			reg = <0x6 0x10508110 0xc>;
419			#thermal-sensor-cells = <0>;
420			clocks = <&ahb_clk>;
421		};
422
423		mdio0: mdio@6110102b0 {
424			compatible = "mscc,ocelot-miim";
425			status = "disabled";
426			#address-cells = <1>;
427			#size-cells = <0>;
428			reg = <0x6 0x110102b0 0x24>;
429		};
430
431		mdio1: mdio@6110102d4 {
432			compatible = "mscc,ocelot-miim";
433			status = "disabled";
434			pinctrl-0 = <&miim1_pins>;
435			pinctrl-names = "default";
436			#address-cells = <1>;
437			#size-cells = <0>;
438			reg = <0x6 0x110102d4 0x24>;
439		};
440
441		mdio2: mdio@6110102f8 {
442			compatible = "mscc,ocelot-miim";
443			status = "disabled";
444			pinctrl-0 = <&miim2_pins>;
445			pinctrl-names = "default";
446			#address-cells = <1>;
447			#size-cells = <0>;
448			reg = <0x6 0x110102d4 0x24>;
449		};
450
451		mdio3: mdio@61101031c {
452			compatible = "mscc,ocelot-miim";
453			status = "disabled";
454			pinctrl-0 = <&miim3_pins>;
455			pinctrl-names = "default";
456			#address-cells = <1>;
457			#size-cells = <0>;
458			reg = <0x6 0x1101031c 0x24>;
459		};
460
461		serdes: serdes@10808000 {
462			compatible = "microchip,sparx5-serdes";
463			#phy-cells = <1>;
464			clocks = <&sys_clk>;
465			reg = <0x6 0x10808000 0x5d0000>;
466		};
467
468		switch: switch@0x600000000 {
469			compatible = "microchip,sparx5-switch";
470			reg =	<0x6 0 0x401000>,
471				<0x6 0x10004000 0x7fc000>,
472				<0x6 0x11010000 0xaf0000>;
473			reg-names = "cpu", "dev", "gcb";
474			interrupt-names = "xtr", "fdma", "ptp";
475			interrupts =	<GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
476					<GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
477					<GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
478			resets = <&reset 0>;
479			reset-names = "switch";
480		};
481	};
482};
483