1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Copyright (c) 2018, Linaro Limited
4 */
5
6/dts-v1/;
7
8#include <dt-bindings/gpio/gpio.h>
9#include "qcs404-evb.dtsi"
10
11/ {
12	model = "Qualcomm Technologies, Inc. QCS404 EVB 4000";
13	compatible = "qcom,qcs404-evb-4000", "qcom,qcs404-evb",
14		     "qcom,qcs404";
15};
16
17&ethernet {
18	status = "okay";
19
20	snps,reset-gpio = <&tlmm 60 GPIO_ACTIVE_LOW>;
21	snps,reset-active-low;
22	snps,reset-delays-us = <0 10000 10000>;
23
24	pinctrl-names = "default";
25	pinctrl-0 = <&ethernet_defaults>;
26
27	phy-handle = <&phy1>;
28	phy-mode = "rgmii";
29	mdio {
30		#address-cells = <0x1>;
31		#size-cells = <0x0>;
32		compatible = "snps,dwmac-mdio";
33		phy1: phy@4 {
34			compatible = "ethernet-phy-ieee802.3-c22";
35			device_type = "ethernet-phy";
36			reg = <0x4>;
37		};
38	};
39};
40
41&tlmm {
42	ethernet_defaults: ethernet-defaults-state {
43		int-pins {
44			pins = "gpio61";
45			function = "rgmii_int";
46			bias-disable;
47			drive-strength = <2>;
48		};
49		mdc-pins {
50			pins = "gpio76";
51			function = "rgmii_mdc";
52			bias-pull-up;
53		};
54		mdio-pins {
55			pins = "gpio75";
56			function = "rgmii_mdio";
57			bias-pull-up;
58		};
59		tx-pins {
60			pins = "gpio67", "gpio66", "gpio65", "gpio64";
61			function = "rgmii_tx";
62			bias-pull-up;
63			drive-strength = <16>;
64		};
65		rx-pins {
66			pins = "gpio73", "gpio72", "gpio71", "gpio70";
67			function = "rgmii_rx";
68			bias-disable;
69			drive-strength = <2>;
70		};
71		tx-ctl-pins {
72			pins = "gpio68";
73			function = "rgmii_ctl";
74			bias-pull-up;
75			drive-strength = <16>;
76		};
77		rx-ctl-pins {
78			pins = "gpio74";
79			function = "rgmii_ctl";
80			bias-disable;
81			drive-strength = <2>;
82		};
83		tx-ck-pins {
84			pins = "gpio63";
85			function = "rgmii_ck";
86			bias-pull-up;
87			drive-strength = <16>;
88		};
89		rx-ck-pins {
90			pins = "gpio69";
91			function = "rgmii_ck";
92			bias-disable;
93			drive-strength = <2>;
94		};
95	};
96};
97