1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
4 * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com>
5 */
6
7#include <dt-bindings/input/linux-event-codes.h>
8#include <dt-bindings/pwm/pwm.h>
9#include "rk3399.dtsi"
10#include "rk3399-opp.dtsi"
11
12/ {
13	aliases {
14		mmc0 = &sdio0;
15		mmc1 = &sdmmc;
16		mmc2 = &sdhci;
17	};
18
19	chosen {
20		stdout-path = "serial2:1500000n8";
21	};
22
23	/* enable for panel backlight support */
24	backlight: backlight {
25		compatible = "pwm-backlight";
26		brightness-levels = <0 4 8 16 32 64 128 255>;
27		default-brightness-level = <5>;
28		pwms = <&pwm0 0 1000000 0>;
29		status = "disabled";
30	};
31
32	clkin_gmac: external-gmac-clock {
33		compatible = "fixed-clock";
34		clock-frequency = <125000000>;
35		clock-output-names = "clkin_gmac";
36		#clock-cells = <0>;
37	};
38
39	gpio-keys {
40		compatible = "gpio-keys";
41		autorepeat;
42		pinctrl-names = "default";
43		pinctrl-0 = <&pwrbtn>;
44
45		key-power {
46			debounce-interval = <100>;
47			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
48			label = "GPIO Key Power";
49			linux,code = <KEY_POWER>;
50			wakeup-source;
51		};
52	};
53
54	ir-receiver {
55		compatible = "gpio-ir-receiver";
56		gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
57		pinctrl-0 = <&ir_int>;
58		pinctrl-names = "default";
59	};
60
61	leds {
62		compatible = "gpio-leds";
63		pinctrl-names = "default";
64		pinctrl-0 = <&work_led_pin>, <&diy_led_pin>;
65
66		work_led: led-0 {
67			label = "work";
68			default-state = "on";
69			gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
70		};
71
72		diy_led: led-1 {
73			label = "diy";
74			default-state = "off";
75			gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
76		};
77	};
78
79	fan: pwm-fan {
80		compatible = "pwm-fan";
81		cooling-levels = <0 100 150 200 255>;
82		#cooling-cells = <2>;
83		fan-supply = <&vcc12v_dcin>;
84		pwms = <&pwm1 0 50000 0>;
85	};
86
87	sdio_pwrseq: sdio-pwrseq {
88		compatible = "mmc-pwrseq-simple";
89		clocks = <&rk808 1>;
90		clock-names = "ext_clock";
91		pinctrl-names = "default";
92		pinctrl-0 = <&wifi_enable_h>;
93		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
94	};
95
96	sound {
97		compatible = "audio-graph-card";
98		label = "Analog";
99		dais = <&i2s1_p0>;
100	};
101
102	sound-dit {
103		compatible = "audio-graph-card";
104		label = "SPDIF";
105		dais = <&spdif_p0>;
106	};
107
108	spdif-dit {
109		compatible = "linux,spdif-dit";
110		#sound-dai-cells = <0>;
111
112		port {
113			dit_p0_0: endpoint {
114				remote-endpoint = <&spdif_p0_0>;
115			};
116		};
117	};
118
119	avdd: avdd-regulator {
120		compatible = "regulator-fixed";
121		regulator-name = "avdd";
122		regulator-min-microvolt = <11000000>;
123		regulator-max-microvolt = <11000000>;
124		vin-supply = <&vcc3v3_s0>;
125	};
126
127	vcc12v_dcin: vcc12v-dcin {
128		compatible = "regulator-fixed";
129		regulator-name = "vcc12v_dcin";
130		regulator-always-on;
131		regulator-boot-on;
132		regulator-min-microvolt = <12000000>;
133		regulator-max-microvolt = <12000000>;
134	};
135
136	/* switched by pmic_sleep */
137	vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
138		compatible = "regulator-fixed";
139		regulator-name = "vcc1v8_s3";
140		regulator-always-on;
141		regulator-boot-on;
142		regulator-min-microvolt = <1800000>;
143		regulator-max-microvolt = <1800000>;
144		vin-supply = <&vcc_1v8>;
145	};
146
147	/* micro SD card power */
148	vcc3v0_sd: vcc3v0-sd {
149		compatible = "regulator-fixed";
150		enable-active-high;
151		gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
152		pinctrl-names = "default";
153		pinctrl-0 = <&sdmmc0_pwr_h>;
154		regulator-name = "vcc3v0_sd";
155		regulator-always-on;
156		regulator-min-microvolt = <3000000>;
157		regulator-max-microvolt = <3000000>;
158		vin-supply = <&vcc3v3_sys>;
159
160		regulator-state-mem {
161			regulator-off-in-suspend;
162		};
163	};
164
165	vcc3v3_pcie: vcc3v3-pcie-regulator {
166		compatible = "regulator-fixed";
167		enable-active-high;
168		gpio = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
169		pinctrl-names = "default";
170		pinctrl-0 = <&pcie_pwr_en>;
171		regulator-name = "vcc3v3_pcie";
172		regulator-always-on;
173		regulator-boot-on;
174		vin-supply = <&vcc12v_dcin>;
175	};
176
177	vcc3v3_sys: vcc3v3-sys {
178		compatible = "regulator-fixed";
179		regulator-name = "vcc3v3_sys";
180		regulator-always-on;
181		regulator-boot-on;
182		regulator-min-microvolt = <3300000>;
183		regulator-max-microvolt = <3300000>;
184		vin-supply = <&vcc5v0_sys>;
185	};
186
187	/* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
188	vcc5v0_host: vcc5v0-host-regulator {
189		compatible = "regulator-fixed";
190		enable-active-high;
191		gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
192		pinctrl-names = "default";
193		pinctrl-0 = <&vcc5v0_host_en>;
194		regulator-name = "vcc5v0_host";
195		regulator-always-on;
196		vin-supply = <&vcc5v0_usb>;
197	};
198
199	vcc5v0_typec: vcc5v0-typec-regulator {
200		compatible = "regulator-fixed";
201		enable-active-high;
202		gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
203		pinctrl-names = "default";
204		pinctrl-0 = <&vcc5v0_typec_en>;
205		regulator-name = "vcc5v0_typec";
206		regulator-always-on;
207		vin-supply = <&vcc5v0_usb>;
208	};
209
210	vcc5v0_sys: vcc5v0-sys {
211		compatible = "regulator-fixed";
212		regulator-name = "vcc5v0_sys";
213		regulator-always-on;
214		regulator-boot-on;
215		regulator-min-microvolt = <5000000>;
216		regulator-max-microvolt = <5000000>;
217		vin-supply = <&vcc12v_dcin>;
218	};
219
220	vcc5v0_usb: vcc5v0-usb {
221		compatible = "regulator-fixed";
222		regulator-name = "vcc5v0_usb";
223		regulator-always-on;
224		regulator-boot-on;
225		regulator-min-microvolt = <5000000>;
226		regulator-max-microvolt = <5000000>;
227		vin-supply = <&vcc12v_dcin>;
228	};
229
230	vdd_log: vdd-log {
231		compatible = "pwm-regulator";
232		pwms = <&pwm2 0 25000 1>;
233		pwm-supply = <&vcc5v0_sys>;
234		regulator-name = "vdd_log";
235		regulator-always-on;
236		regulator-boot-on;
237		regulator-min-microvolt = <800000>;
238		regulator-max-microvolt = <1700000>;
239	};
240};
241
242&cpu_l0 {
243	cpu-supply = <&vdd_cpu_l>;
244};
245
246&cpu_l1 {
247	cpu-supply = <&vdd_cpu_l>;
248};
249
250&cpu_l2 {
251	cpu-supply = <&vdd_cpu_l>;
252};
253
254&cpu_l3 {
255	cpu-supply = <&vdd_cpu_l>;
256};
257
258&cpu_b0 {
259	cpu-supply = <&vdd_cpu_b>;
260};
261
262&cpu_b1 {
263	cpu-supply = <&vdd_cpu_b>;
264};
265
266&cpu_thermal {
267	trips {
268		cpu_warm: cpu_warm {
269			temperature = <55000>;
270			hysteresis = <2000>;
271			type = "active";
272		};
273
274		cpu_hot: cpu_hot {
275			temperature = <65000>;
276			hysteresis = <2000>;
277			type = "active";
278		};
279	};
280
281	cooling-maps {
282		map2 {
283			trip = <&cpu_warm>;
284			cooling-device = <&fan THERMAL_NO_LIMIT 1>;
285		};
286
287		map3 {
288			trip = <&cpu_hot>;
289			cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
290		};
291	};
292};
293
294&emmc_phy {
295	status = "okay";
296};
297
298&gmac {
299	assigned-clocks = <&cru SCLK_RMII_SRC>;
300	assigned-clock-parents = <&clkin_gmac>;
301	clock_in_out = "input";
302	phy-supply = <&vcc_lan>;
303	phy-mode = "rgmii";
304	pinctrl-names = "default";
305	pinctrl-0 = <&rgmii_pins>;
306	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
307	snps,reset-active-low;
308	snps,reset-delays-us = <0 10000 50000>;
309	tx_delay = <0x28>;
310	rx_delay = <0x11>;
311	status = "okay";
312};
313
314&hdmi {
315	ddc-i2c-bus = <&i2c3>;
316	pinctrl-names = "default";
317	pinctrl-0 = <&hdmi_cec>;
318	status = "okay";
319};
320
321&hdmi_sound {
322	status = "okay";
323};
324
325&gpu {
326	mali-supply = <&vdd_gpu>;
327	status = "okay";
328};
329
330&i2c0 {
331	clock-frequency = <400000>;
332	i2c-scl-rising-time-ns = <168>;
333	i2c-scl-falling-time-ns = <4>;
334	status = "okay";
335
336	rk808: pmic@1b {
337		compatible = "rockchip,rk808";
338		reg = <0x1b>;
339		interrupt-parent = <&gpio3>;
340		interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
341		#clock-cells = <1>;
342		clock-output-names = "xin32k", "rk808-clkout2";
343		pinctrl-names = "default";
344		pinctrl-0 = <&pmic_int_l>;
345		rockchip,system-power-controller;
346		wakeup-source;
347
348		vcc1-supply = <&vcc5v0_sys>;
349		vcc2-supply = <&vcc5v0_sys>;
350		vcc3-supply = <&vcc5v0_sys>;
351		vcc4-supply = <&vcc5v0_sys>;
352		vcc6-supply = <&vcc5v0_sys>;
353		vcc7-supply = <&vcc5v0_sys>;
354		vcc8-supply = <&vcc3v3_sys>;
355		vcc9-supply = <&vcc5v0_sys>;
356		vcc10-supply = <&vcc5v0_sys>;
357		vcc11-supply = <&vcc5v0_sys>;
358		vcc12-supply = <&vcc3v3_sys>;
359		vddio-supply = <&vcca_1v8>;
360
361		regulators {
362			vdd_center: DCDC_REG1 {
363				regulator-name = "vdd_center";
364				regulator-always-on;
365				regulator-boot-on;
366				regulator-min-microvolt = <750000>;
367				regulator-max-microvolt = <1350000>;
368				regulator-ramp-delay = <6001>;
369				regulator-state-mem {
370					regulator-off-in-suspend;
371				};
372			};
373
374			vdd_cpu_l: DCDC_REG2 {
375				regulator-name = "vdd_cpu_l";
376				regulator-always-on;
377				regulator-boot-on;
378				regulator-min-microvolt = <750000>;
379				regulator-max-microvolt = <1350000>;
380				regulator-ramp-delay = <6001>;
381				regulator-state-mem {
382					regulator-off-in-suspend;
383				};
384			};
385
386			vcc_ddr: DCDC_REG3 {
387				regulator-name = "vcc_ddr";
388				regulator-always-on;
389				regulator-boot-on;
390				regulator-state-mem {
391					regulator-on-in-suspend;
392				};
393			};
394
395			vcc_1v8: DCDC_REG4 {
396				regulator-name = "vcc_1v8";
397				regulator-always-on;
398				regulator-boot-on;
399				regulator-min-microvolt = <1800000>;
400				regulator-max-microvolt = <1800000>;
401				regulator-state-mem {
402					regulator-on-in-suspend;
403					regulator-suspend-microvolt = <1800000>;
404				};
405			};
406
407			vcc1v8_dvp: LDO_REG1 {
408				regulator-name = "vcc1v8_dvp";
409				regulator-always-on;
410				regulator-boot-on;
411				regulator-min-microvolt = <1800000>;
412				regulator-max-microvolt = <1800000>;
413				regulator-state-mem {
414					regulator-off-in-suspend;
415				};
416			};
417
418			vcc3v0_touch: LDO_REG2 {
419				regulator-name = "vcc3v0_touch";
420				regulator-min-microvolt = <3000000>;
421				regulator-max-microvolt = <3000000>;
422				regulator-state-mem {
423					regulator-off-in-suspend;
424				};
425			};
426
427			vcca_1v8: LDO_REG3 {
428				regulator-name = "vcca_1v8";
429				regulator-always-on;
430				regulator-boot-on;
431				regulator-min-microvolt = <1800000>;
432				regulator-max-microvolt = <1800000>;
433				regulator-state-mem {
434					regulator-on-in-suspend;
435					regulator-suspend-microvolt = <1800000>;
436				};
437			};
438
439			vcc_sdio: LDO_REG4 {
440				regulator-name = "vcc_sdio";
441				regulator-always-on;
442				regulator-boot-on;
443				regulator-min-microvolt = <1800000>;
444				regulator-max-microvolt = <3000000>;
445				regulator-state-mem {
446					regulator-on-in-suspend;
447					regulator-suspend-microvolt = <3000000>;
448				};
449			};
450
451			vcca3v0_codec: LDO_REG5 {
452				regulator-name = "vcca3v0_codec";
453				regulator-always-on;
454				regulator-boot-on;
455				regulator-min-microvolt = <3000000>;
456				regulator-max-microvolt = <3000000>;
457				regulator-state-mem {
458					regulator-off-in-suspend;
459				};
460			};
461
462			vcc_1v5: LDO_REG6 {
463				regulator-name = "vcc_1v5";
464				regulator-always-on;
465				regulator-boot-on;
466				regulator-min-microvolt = <1500000>;
467				regulator-max-microvolt = <1500000>;
468				regulator-state-mem {
469					regulator-on-in-suspend;
470					regulator-suspend-microvolt = <1500000>;
471				};
472			};
473
474			vcca1v8_codec: LDO_REG7 {
475				regulator-name = "vcca1v8_codec";
476				regulator-always-on;
477				regulator-boot-on;
478				regulator-min-microvolt = <1800000>;
479				regulator-max-microvolt = <1800000>;
480				regulator-state-mem {
481					regulator-off-in-suspend;
482				};
483			};
484
485			vcc_3v0: LDO_REG8 {
486				regulator-name = "vcc_3v0";
487				regulator-always-on;
488				regulator-boot-on;
489				regulator-min-microvolt = <3000000>;
490				regulator-max-microvolt = <3000000>;
491				regulator-state-mem {
492					regulator-on-in-suspend;
493					regulator-suspend-microvolt = <3000000>;
494				};
495			};
496
497			vcc3v3_s3: vcc_lan: SWITCH_REG1 {
498				regulator-name = "vcc3v3_s3";
499				regulator-always-on;
500				regulator-boot-on;
501				regulator-state-mem {
502					regulator-off-in-suspend;
503				};
504			};
505
506			vcc3v3_s0: SWITCH_REG2 {
507				regulator-name = "vcc3v3_s0";
508				regulator-state-mem {
509					regulator-off-in-suspend;
510				};
511			};
512		};
513	};
514
515	vdd_cpu_b: regulator@40 {
516		compatible = "silergy,syr827";
517		reg = <0x40>;
518		fcs,suspend-voltage-selector = <1>;
519		pinctrl-names = "default";
520		pinctrl-0 = <&vsel1_pin>;
521		regulator-name = "vdd_cpu_b";
522		regulator-min-microvolt = <712500>;
523		regulator-max-microvolt = <1500000>;
524		regulator-ramp-delay = <1000>;
525		regulator-always-on;
526		regulator-boot-on;
527		vin-supply = <&vcc5v0_sys>;
528
529		regulator-state-mem {
530			regulator-off-in-suspend;
531		};
532	};
533
534	vdd_gpu: regulator@41 {
535		compatible = "silergy,syr828";
536		reg = <0x41>;
537		fcs,suspend-voltage-selector = <1>;
538		pinctrl-names = "default";
539		pinctrl-0 = <&vsel2_pin>;
540		regulator-name = "vdd_gpu";
541		regulator-min-microvolt = <712500>;
542		regulator-max-microvolt = <1500000>;
543		regulator-ramp-delay = <1000>;
544		regulator-always-on;
545		regulator-boot-on;
546		vin-supply = <&vcc5v0_sys>;
547
548		regulator-state-mem {
549			regulator-off-in-suspend;
550		};
551	};
552};
553
554&i2c1 {
555	i2c-scl-rising-time-ns = <300>;
556	i2c-scl-falling-time-ns = <15>;
557	status = "okay";
558};
559
560&i2c3 {
561	i2c-scl-rising-time-ns = <450>;
562	i2c-scl-falling-time-ns = <15>;
563	status = "okay";
564};
565
566&i2c4 {
567	i2c-scl-rising-time-ns = <600>;
568	i2c-scl-falling-time-ns = <20>;
569	status = "okay";
570
571	fusb0: typec-portc@22 {
572		compatible = "fcs,fusb302";
573		reg = <0x22>;
574		interrupt-parent = <&gpio1>;
575		interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
576		pinctrl-names = "default";
577		pinctrl-0 = <&fusb0_int>;
578		vbus-supply = <&vcc5v0_typec>;
579		status = "okay";
580	};
581
582	/* enable for pine64 touch screen support */
583	touch: touchscreen@5d {
584		compatible = "goodix,gt911";
585		reg = <0x5d>;
586		interrupt-parent = <&gpio4>;
587		interrupts = <RK_PD5 IRQ_TYPE_EDGE_FALLING>;
588		AVDD28-supply = <&vcc3v0_touch>;
589		VDDIO-supply = <&vcc3v0_touch>;
590		irq-gpios = <&gpio4 RK_PD5 GPIO_ACTIVE_HIGH>;
591		reset-gpios = <&gpio4 RK_PD6 GPIO_ACTIVE_HIGH>;
592		status = "disabled";
593	};
594};
595
596&i2s0 {
597	rockchip,playback-channels = <8>;
598	rockchip,capture-channels = <8>;
599	status = "okay";
600};
601
602&i2s1 {
603	rockchip,playback-channels = <2>;
604	rockchip,capture-channels = <2>;
605	status = "okay";
606
607	i2s1_p0: port {
608		i2s1_p0_0: endpoint {
609			dai-format = "i2s";
610			mclk-fs = <256>;
611			remote-endpoint = <&es8316_p0_0>;
612		};
613	};
614};
615
616&i2s2 {
617	status = "okay";
618};
619
620&io_domains {
621	status = "okay";
622
623	bt656-supply = <&vcc1v8_dvp>;
624	audio-supply = <&vcc_3v0>;
625	sdmmc-supply = <&vcc_sdio>;
626	gpio1830-supply = <&vcc_3v0>;
627};
628
629/* enable for pine64 panel display support */
630&mipi_dsi {
631	clock-master;
632	status = "disabled";
633
634	ports {
635		mipi_out: port@1 {
636			reg = <1>;
637
638			mipi_out_panel: endpoint {
639				remote-endpoint = <&mipi_in_panel>;
640			};
641		};
642	};
643
644	mipi_panel: panel@0 {
645		compatible = "feiyang,fy07024di26a30d";
646		reg = <0>;
647		avdd-supply = <&avdd>;
648		backlight = <&backlight>;
649		dvdd-supply = <&vcc3v3_s0>;
650		ports {
651			#address-cells = <1>;
652			#size-cells = <0>;
653
654			port@0 {
655				reg = <0>;
656
657				mipi_in_panel: endpoint {
658					remote-endpoint = <&mipi_out_panel>;
659				};
660			};
661		};
662	};
663};
664
665&pcie0 {
666	ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
667	num-lanes = <4>;
668	pinctrl-names = "default";
669	pinctrl-0 = <&pcie_perst>;
670	vpcie12v-supply = <&vcc12v_dcin>;
671	vpcie3v3-supply = <&vcc3v3_pcie>;
672	status = "okay";
673};
674
675&pcie_phy {
676	status = "okay";
677};
678
679&pmu_io_domains {
680	pmu1830-supply = <&vcc_3v0>;
681	status = "okay";
682};
683
684&pinctrl {
685	bt {
686		bt_enable_h: bt-enable-h {
687			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
688		};
689
690		bt_host_wake_l: bt-host-wake-l {
691			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>;
692		};
693
694		bt_wake_l: bt-wake-l {
695			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
696		};
697	};
698
699	buttons {
700		pwrbtn: pwrbtn {
701			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
702		};
703	};
704
705	fusb302x {
706		fusb0_int: fusb0-int {
707			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
708		};
709	};
710
711	ir {
712		ir_int: ir-int {
713			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
714		};
715	};
716
717	leds {
718		work_led_pin: work-led-pin {
719			rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
720		};
721
722		diy_led_pin: diy-led-pin {
723			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
724		};
725	};
726
727	pcie {
728		pcie_perst: pcie-perst {
729			rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
730		};
731
732		pcie_pwr_en: pcie-pwr-en {
733			rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
734		};
735	};
736
737	pmic {
738		pmic_int_l: pmic-int-l {
739			rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
740		};
741
742		vsel1_pin: vsel1-pin {
743			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
744		};
745
746		vsel2_pin: vsel2-pin {
747			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
748		};
749	};
750
751	sdcard {
752		sdmmc0_pwr_h: sdmmc0-pwr-h {
753			rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
754		};
755
756	};
757
758	sdio-pwrseq {
759		wifi_enable_h: wifi-enable-h {
760			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
761		};
762	};
763
764	usb-typec {
765		vcc5v0_typec_en: vcc5v0_typec_en {
766			rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
767		};
768	};
769
770	usb2 {
771		vcc5v0_host_en: vcc5v0-host-en {
772			rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
773		};
774	};
775};
776
777&pwm0 {
778	status = "okay";
779};
780
781&pwm1 {
782	status = "okay";
783};
784
785&pwm2 {
786	status = "okay";
787};
788
789&saradc {
790	vref-supply = <&vcca1v8_s3>;
791	status = "okay";
792};
793
794&sdio0 {
795	bus-width = <4>;
796	cap-sd-highspeed;
797	cap-sdio-irq;
798	disable-wp;
799	keep-power-in-suspend;
800	mmc-pwrseq = <&sdio_pwrseq>;
801	non-removable;
802	pinctrl-names = "default";
803	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
804	sd-uhs-sdr104;
805	status = "okay";
806};
807
808&sdmmc {
809	bus-width = <4>;
810	cap-sd-highspeed;
811	cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
812	disable-wp;
813	max-frequency = <150000000>;
814	pinctrl-names = "default";
815	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
816	vmmc-supply = <&vcc3v0_sd>;
817	vqmmc-supply = <&vcc_sdio>;
818	status = "okay";
819};
820
821&sdhci {
822	bus-width = <8>;
823	mmc-hs200-1_8v;
824	non-removable;
825	status = "okay";
826};
827
828&spdif {
829	pinctrl-0 = <&spdif_bus_1>;
830
831	spdif_p0: port {
832		spdif_p0_0: endpoint {
833			remote-endpoint = <&dit_p0_0>;
834		};
835	};
836};
837
838&spi1 {
839	status = "okay";
840
841	flash@0 {
842		compatible = "jedec,spi-nor";
843		reg = <0>;
844		spi-max-frequency = <10000000>;
845	};
846};
847
848&tcphy0 {
849	status = "okay";
850};
851
852&tcphy1 {
853	status = "okay";
854};
855
856&tsadc {
857	/* tshut mode 0:CRU 1:GPIO */
858	rockchip,hw-tshut-mode = <1>;
859	/* tshut polarity 0:LOW 1:HIGH */
860	rockchip,hw-tshut-polarity = <1>;
861	status = "okay";
862};
863
864&u2phy0 {
865	status = "okay";
866
867	u2phy0_otg: otg-port {
868		status = "okay";
869	};
870
871	u2phy0_host: host-port {
872		phy-supply = <&vcc5v0_host>;
873		status = "okay";
874	};
875};
876
877&u2phy1 {
878	status = "okay";
879
880	u2phy1_otg: otg-port {
881		status = "okay";
882	};
883
884	u2phy1_host: host-port {
885		phy-supply = <&vcc5v0_host>;
886		status = "okay";
887	};
888};
889
890&uart0 {
891	pinctrl-names = "default";
892	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
893	status = "okay";
894
895	bluetooth {
896		compatible = "brcm,bcm43438-bt";
897		clocks = <&rk808 1>;
898		clock-names = "lpo";
899		device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
900		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
901		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
902		pinctrl-names = "default";
903		pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
904		vbat-supply = <&vcc3v3_sys>;
905		vddio-supply = <&vcc_1v8>;
906	};
907};
908
909&uart2 {
910	status = "okay";
911};
912
913&usb_host0_ehci {
914	status = "okay";
915};
916
917&usb_host0_ohci {
918	status = "okay";
919};
920
921&usb_host1_ehci {
922	status = "okay";
923};
924
925&usb_host1_ohci {
926	status = "okay";
927};
928
929&usbdrd3_0 {
930	status = "okay";
931};
932
933&usbdrd_dwc3_0 {
934	status = "okay";
935	dr_mode = "host";
936};
937
938&usbdrd3_1 {
939	status = "okay";
940};
941
942&usbdrd_dwc3_1 {
943	status = "okay";
944	dr_mode = "host";
945};
946
947&vopb {
948	status = "okay";
949};
950
951&vopb_mmu {
952	status = "okay";
953};
954
955&vopl {
956	status = "okay";
957};
958
959&vopl_mmu {
960	status = "okay";
961};
962