xref: /freebsd/sys/dev/ath/ath_hal/ar5212/ar5212_misc.c (revision 4f52dfbb)
1 /*-
2  * SPDX-License-Identifier: ISC
3  *
4  * Copyright (c) 2002-2009 Sam Leffler, Errno Consulting
5  * Copyright (c) 2002-2008 Atheros Communications, Inc.
6  *
7  * Permission to use, copy, modify, and/or distribute this software for any
8  * purpose with or without fee is hereby granted, provided that the above
9  * copyright notice and this permission notice appear in all copies.
10  *
11  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
12  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
13  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
14  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
15  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
16  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
17  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
18  *
19  * $FreeBSD$
20  */
21 #include "opt_ah.h"
22 
23 #include "ah.h"
24 #include "ah_internal.h"
25 #include "ah_devid.h"
26 #include "ah_desc.h"			/* NB: for HAL_PHYERR* */
27 
28 #include "ar5212/ar5212.h"
29 #include "ar5212/ar5212reg.h"
30 #include "ar5212/ar5212phy.h"
31 
32 #include "ah_eeprom_v3.h"
33 
34 #define	AR_NUM_GPIO	6		/* 6 GPIO pins */
35 #define	AR_GPIOD_MASK	0x0000002F	/* GPIO data reg r/w mask */
36 
37 void
38 ar5212GetMacAddress(struct ath_hal *ah, uint8_t *mac)
39 {
40 	struct ath_hal_5212 *ahp = AH5212(ah);
41 
42 	OS_MEMCPY(mac, ahp->ah_macaddr, IEEE80211_ADDR_LEN);
43 }
44 
45 HAL_BOOL
46 ar5212SetMacAddress(struct ath_hal *ah, const uint8_t *mac)
47 {
48 	struct ath_hal_5212 *ahp = AH5212(ah);
49 
50 	OS_MEMCPY(ahp->ah_macaddr, mac, IEEE80211_ADDR_LEN);
51 	return AH_TRUE;
52 }
53 
54 void
55 ar5212GetBssIdMask(struct ath_hal *ah, uint8_t *mask)
56 {
57 	struct ath_hal_5212 *ahp = AH5212(ah);
58 
59 	OS_MEMCPY(mask, ahp->ah_bssidmask, IEEE80211_ADDR_LEN);
60 }
61 
62 HAL_BOOL
63 ar5212SetBssIdMask(struct ath_hal *ah, const uint8_t *mask)
64 {
65 	struct ath_hal_5212 *ahp = AH5212(ah);
66 
67 	/* save it since it must be rewritten on reset */
68 	OS_MEMCPY(ahp->ah_bssidmask, mask, IEEE80211_ADDR_LEN);
69 
70 	OS_REG_WRITE(ah, AR_BSSMSKL, LE_READ_4(ahp->ah_bssidmask));
71 	OS_REG_WRITE(ah, AR_BSSMSKU, LE_READ_2(ahp->ah_bssidmask + 4));
72 	return AH_TRUE;
73 }
74 
75 /*
76  * Attempt to change the cards operating regulatory domain to the given value
77  */
78 HAL_BOOL
79 ar5212SetRegulatoryDomain(struct ath_hal *ah,
80 	uint16_t regDomain, HAL_STATUS *status)
81 {
82 	HAL_STATUS ecode;
83 
84 	if (AH_PRIVATE(ah)->ah_currentRD == regDomain) {
85 		ecode = HAL_EINVAL;
86 		goto bad;
87 	}
88 	if (ath_hal_eepromGetFlag(ah, AR_EEP_WRITEPROTECT)) {
89 		ecode = HAL_EEWRITE;
90 		goto bad;
91 	}
92 #ifdef AH_SUPPORT_WRITE_REGDOMAIN
93 	if (ath_hal_eepromWrite(ah, AR_EEPROM_REG_DOMAIN, regDomain)) {
94 		HALDEBUG(ah, HAL_DEBUG_ANY,
95 		    "%s: set regulatory domain to %u (0x%x)\n",
96 		    __func__, regDomain, regDomain);
97 		AH_PRIVATE(ah)->ah_currentRD = regDomain;
98 		return AH_TRUE;
99 	}
100 #endif
101 	ecode = HAL_EIO;
102 bad:
103 	if (status)
104 		*status = ecode;
105 	return AH_FALSE;
106 }
107 
108 /*
109  * Return the wireless modes (a,b,g,t) supported by hardware.
110  *
111  * This value is what is actually supported by the hardware
112  * and is unaffected by regulatory/country code settings.
113  */
114 u_int
115 ar5212GetWirelessModes(struct ath_hal *ah)
116 {
117 	u_int mode = 0;
118 
119 	if (ath_hal_eepromGetFlag(ah, AR_EEP_AMODE)) {
120 		mode = HAL_MODE_11A;
121 		if (!ath_hal_eepromGetFlag(ah, AR_EEP_TURBO5DISABLE))
122 			mode |= HAL_MODE_TURBO | HAL_MODE_108A;
123 		if (AH_PRIVATE(ah)->ah_caps.halChanHalfRate)
124 			mode |= HAL_MODE_11A_HALF_RATE;
125 		if (AH_PRIVATE(ah)->ah_caps.halChanQuarterRate)
126 			mode |= HAL_MODE_11A_QUARTER_RATE;
127 	}
128 	if (ath_hal_eepromGetFlag(ah, AR_EEP_BMODE))
129 		mode |= HAL_MODE_11B;
130 	if (ath_hal_eepromGetFlag(ah, AR_EEP_GMODE) &&
131 	    AH_PRIVATE(ah)->ah_subvendorid != AR_SUBVENDOR_ID_NOG) {
132 		mode |= HAL_MODE_11G;
133 		if (!ath_hal_eepromGetFlag(ah, AR_EEP_TURBO2DISABLE))
134 			mode |= HAL_MODE_108G;
135 		if (AH_PRIVATE(ah)->ah_caps.halChanHalfRate)
136 			mode |= HAL_MODE_11G_HALF_RATE;
137 		if (AH_PRIVATE(ah)->ah_caps.halChanQuarterRate)
138 			mode |= HAL_MODE_11G_QUARTER_RATE;
139 	}
140 	return mode;
141 }
142 
143 /*
144  * Set the interrupt and GPIO values so the ISR can disable RF
145  * on a switch signal.  Assumes GPIO port and interrupt polarity
146  * are set prior to call.
147  */
148 void
149 ar5212EnableRfKill(struct ath_hal *ah)
150 {
151 	uint16_t rfsilent = AH_PRIVATE(ah)->ah_rfsilent;
152 	int select = MS(rfsilent, AR_EEPROM_RFSILENT_GPIO_SEL);
153 	int polarity = MS(rfsilent, AR_EEPROM_RFSILENT_POLARITY);
154 
155 	/*
156 	 * Configure the desired GPIO port for input
157 	 * and enable baseband rf silence.
158 	 */
159 	ath_hal_gpioCfgInput(ah, select);
160 	OS_REG_SET_BIT(ah, AR_PHY(0), 0x00002000);
161 	/*
162 	 * If radio disable switch connection to GPIO bit x is enabled
163 	 * program GPIO interrupt.
164 	 * If rfkill bit on eeprom is 1, setupeeprommap routine has already
165 	 * verified that it is a later version of eeprom, it has a place for
166 	 * rfkill bit and it is set to 1, indicating that GPIO bit x hardware
167 	 * connection is present.
168 	 */
169 	ath_hal_gpioSetIntr(ah, select,
170 	    (ath_hal_gpioGet(ah, select) == polarity ? !polarity : polarity));
171 }
172 
173 /*
174  * Change the LED blinking pattern to correspond to the connectivity
175  */
176 void
177 ar5212SetLedState(struct ath_hal *ah, HAL_LED_STATE state)
178 {
179 	static const uint32_t ledbits[8] = {
180 		AR_PCICFG_LEDCTL_NONE,	/* HAL_LED_INIT */
181 		AR_PCICFG_LEDCTL_PEND,	/* HAL_LED_SCAN */
182 		AR_PCICFG_LEDCTL_PEND,	/* HAL_LED_AUTH */
183 		AR_PCICFG_LEDCTL_ASSOC,	/* HAL_LED_ASSOC*/
184 		AR_PCICFG_LEDCTL_ASSOC,	/* HAL_LED_RUN */
185 		AR_PCICFG_LEDCTL_NONE,
186 		AR_PCICFG_LEDCTL_NONE,
187 		AR_PCICFG_LEDCTL_NONE,
188 	};
189 	uint32_t bits;
190 
191 	bits = OS_REG_READ(ah, AR_PCICFG);
192 	if (IS_2417(ah)) {
193 		/*
194 		 * Enable LED for Nala. There is a bit marked reserved
195 		 * that must be set and we also turn on the power led.
196 		 * Because we mark s/w LED control setting the control
197 		 * status bits below is meangless (the driver must flash
198 		 * the LED(s) using the GPIO lines).
199 		 */
200 		bits = (bits &~ AR_PCICFG_LEDMODE)
201 		     | SM(AR_PCICFG_LEDMODE_POWON, AR_PCICFG_LEDMODE)
202 #if 0
203 		     | SM(AR_PCICFG_LEDMODE_NETON, AR_PCICFG_LEDMODE)
204 #endif
205 		     | 0x08000000;
206 	}
207 	bits = (bits &~ AR_PCICFG_LEDCTL)
208 	     | SM(ledbits[state & 0x7], AR_PCICFG_LEDCTL);
209 	OS_REG_WRITE(ah, AR_PCICFG, bits);
210 }
211 
212 /*
213  * Change association related fields programmed into the hardware.
214  * Writing a valid BSSID to the hardware effectively enables the hardware
215  * to synchronize its TSF to the correct beacons and receive frames coming
216  * from that BSSID. It is called by the SME JOIN operation.
217  */
218 void
219 ar5212WriteAssocid(struct ath_hal *ah, const uint8_t *bssid, uint16_t assocId)
220 {
221 	struct ath_hal_5212 *ahp = AH5212(ah);
222 
223 	/* save bssid for possible re-use on reset */
224 	OS_MEMCPY(ahp->ah_bssid, bssid, IEEE80211_ADDR_LEN);
225 	ahp->ah_assocId = assocId;
226 	OS_REG_WRITE(ah, AR_BSS_ID0, LE_READ_4(ahp->ah_bssid));
227 	OS_REG_WRITE(ah, AR_BSS_ID1, LE_READ_2(ahp->ah_bssid+4) |
228 				     ((assocId & 0x3fff)<<AR_BSS_ID1_AID_S));
229 }
230 
231 /*
232  * Get the current hardware tsf for stamlme
233  */
234 uint64_t
235 ar5212GetTsf64(struct ath_hal *ah)
236 {
237 	uint32_t low1, low2, u32;
238 
239 	/* sync multi-word read */
240 	low1 = OS_REG_READ(ah, AR_TSF_L32);
241 	u32 = OS_REG_READ(ah, AR_TSF_U32);
242 	low2 = OS_REG_READ(ah, AR_TSF_L32);
243 	if (low2 < low1) {	/* roll over */
244 		/*
245 		 * If we are not preempted this will work.  If we are
246 		 * then we re-reading AR_TSF_U32 does no good as the
247 		 * low bits will be meaningless.  Likewise reading
248 		 * L32, U32, U32, then comparing the last two reads
249 		 * to check for rollover doesn't help if preempted--so
250 		 * we take this approach as it costs one less PCI read
251 		 * which can be noticeable when doing things like
252 		 * timestamping packets in monitor mode.
253 		 */
254 		u32++;
255 	}
256 	return (((uint64_t) u32) << 32) | ((uint64_t) low2);
257 }
258 
259 /*
260  * Get the current hardware tsf for stamlme
261  */
262 uint32_t
263 ar5212GetTsf32(struct ath_hal *ah)
264 {
265 	return OS_REG_READ(ah, AR_TSF_L32);
266 }
267 
268 void
269 ar5212SetTsf64(struct ath_hal *ah, uint64_t tsf64)
270 {
271 	OS_REG_WRITE(ah, AR_TSF_L32, tsf64 & 0xffffffff);
272 	OS_REG_WRITE(ah, AR_TSF_U32, (tsf64 >> 32) & 0xffffffff);
273 }
274 
275 /*
276  * Reset the current hardware tsf for stamlme.
277  */
278 void
279 ar5212ResetTsf(struct ath_hal *ah)
280 {
281 
282 	uint32_t val = OS_REG_READ(ah, AR_BEACON);
283 
284 	OS_REG_WRITE(ah, AR_BEACON, val | AR_BEACON_RESET_TSF);
285 	/*
286 	 * When resetting the TSF, write twice to the
287 	 * corresponding register; each write to the RESET_TSF bit toggles
288 	 * the internal signal to cause a reset of the TSF - but if the signal
289 	 * is left high, it will reset the TSF on the next chip reset also!
290 	 * writing the bit an even number of times fixes this issue
291 	 */
292 	OS_REG_WRITE(ah, AR_BEACON, val | AR_BEACON_RESET_TSF);
293 }
294 
295 /*
296  * Set or clear hardware basic rate bit
297  * Set hardware basic rate set if basic rate is found
298  * and basic rate is equal or less than 2Mbps
299  */
300 void
301 ar5212SetBasicRate(struct ath_hal *ah, HAL_RATE_SET *rs)
302 {
303 	const struct ieee80211_channel *chan = AH_PRIVATE(ah)->ah_curchan;
304 	uint32_t reg;
305 	uint8_t xset;
306 	int i;
307 
308 	if (chan == AH_NULL || !IEEE80211_IS_CHAN_CCK(chan))
309 		return;
310 	xset = 0;
311 	for (i = 0; i < rs->rs_count; i++) {
312 		uint8_t rset = rs->rs_rates[i];
313 		/* Basic rate defined? */
314 		if ((rset & 0x80) && (rset &= 0x7f) >= xset)
315 			xset = rset;
316 	}
317 	/*
318 	 * Set the h/w bit to reflect whether or not the basic
319 	 * rate is found to be equal or less than 2Mbps.
320 	 */
321 	reg = OS_REG_READ(ah, AR_STA_ID1);
322 	if (xset && xset/2 <= 2)
323 		OS_REG_WRITE(ah, AR_STA_ID1, reg | AR_STA_ID1_BASE_RATE_11B);
324 	else
325 		OS_REG_WRITE(ah, AR_STA_ID1, reg &~ AR_STA_ID1_BASE_RATE_11B);
326 }
327 
328 /*
329  * Grab a semi-random value from hardware registers - may not
330  * change often
331  */
332 uint32_t
333 ar5212GetRandomSeed(struct ath_hal *ah)
334 {
335 	uint32_t nf;
336 
337 	nf = (OS_REG_READ(ah, AR_PHY(25)) >> 19) & 0x1ff;
338 	if (nf & 0x100)
339 		nf = 0 - ((nf ^ 0x1ff) + 1);
340 	return (OS_REG_READ(ah, AR_TSF_U32) ^
341 		OS_REG_READ(ah, AR_TSF_L32) ^ nf);
342 }
343 
344 /*
345  * Detect if our card is present
346  */
347 HAL_BOOL
348 ar5212DetectCardPresent(struct ath_hal *ah)
349 {
350 	uint16_t macVersion, macRev;
351 	uint32_t v;
352 
353 	/*
354 	 * Read the Silicon Revision register and compare that
355 	 * to what we read at attach time.  If the same, we say
356 	 * a card/device is present.
357 	 */
358 	v = OS_REG_READ(ah, AR_SREV) & AR_SREV_ID;
359 	macVersion = v >> AR_SREV_ID_S;
360 	macRev = v & AR_SREV_REVISION;
361 	return (AH_PRIVATE(ah)->ah_macVersion == macVersion &&
362 		AH_PRIVATE(ah)->ah_macRev == macRev);
363 }
364 
365 void
366 ar5212EnableMibCounters(struct ath_hal *ah)
367 {
368 	/* NB: this just resets the mib counter machinery */
369 	OS_REG_WRITE(ah, AR_MIBC,
370 	    ~(AR_MIBC_COW | AR_MIBC_FMC | AR_MIBC_CMC | AR_MIBC_MCS) & 0x0f);
371 }
372 
373 void
374 ar5212DisableMibCounters(struct ath_hal *ah)
375 {
376 	OS_REG_WRITE(ah, AR_MIBC,  AR_MIBC | AR_MIBC_CMC);
377 }
378 
379 /*
380  * Update MIB Counters
381  */
382 void
383 ar5212UpdateMibCounters(struct ath_hal *ah, HAL_MIB_STATS* stats)
384 {
385 	stats->ackrcv_bad += OS_REG_READ(ah, AR_ACK_FAIL);
386 	stats->rts_bad	  += OS_REG_READ(ah, AR_RTS_FAIL);
387 	stats->fcs_bad	  += OS_REG_READ(ah, AR_FCS_FAIL);
388 	stats->rts_good	  += OS_REG_READ(ah, AR_RTS_OK);
389 	stats->beacons	  += OS_REG_READ(ah, AR_BEACON_CNT);
390 }
391 
392 /*
393  * Detect if the HW supports spreading a CCK signal on channel 14
394  */
395 HAL_BOOL
396 ar5212IsJapanChannelSpreadSupported(struct ath_hal *ah)
397 {
398 	return AH_TRUE;
399 }
400 
401 /*
402  * Get the rssi of frame curently being received.
403  */
404 uint32_t
405 ar5212GetCurRssi(struct ath_hal *ah)
406 {
407 	return (OS_REG_READ(ah, AR_PHY_CURRENT_RSSI) & 0xff);
408 }
409 
410 u_int
411 ar5212GetDefAntenna(struct ath_hal *ah)
412 {
413 	return (OS_REG_READ(ah, AR_DEF_ANTENNA) & 0x7);
414 }
415 
416 void
417 ar5212SetDefAntenna(struct ath_hal *ah, u_int antenna)
418 {
419 	OS_REG_WRITE(ah, AR_DEF_ANTENNA, (antenna & 0x7));
420 }
421 
422 HAL_ANT_SETTING
423 ar5212GetAntennaSwitch(struct ath_hal *ah)
424 {
425 	return AH5212(ah)->ah_antControl;
426 }
427 
428 HAL_BOOL
429 ar5212SetAntennaSwitch(struct ath_hal *ah, HAL_ANT_SETTING setting)
430 {
431 	struct ath_hal_5212 *ahp = AH5212(ah);
432 	const struct ieee80211_channel *chan = AH_PRIVATE(ah)->ah_curchan;
433 
434 	if (!ahp->ah_phyPowerOn || chan == AH_NULL) {
435 		/* PHY powered off, just stash settings */
436 		ahp->ah_antControl = setting;
437 		ahp->ah_diversity = (setting == HAL_ANT_VARIABLE);
438 		return AH_TRUE;
439 	}
440 	return ar5212SetAntennaSwitchInternal(ah, setting, chan);
441 }
442 
443 HAL_BOOL
444 ar5212IsSleepAfterBeaconBroken(struct ath_hal *ah)
445 {
446 	return AH_TRUE;
447 }
448 
449 HAL_BOOL
450 ar5212SetSifsTime(struct ath_hal *ah, u_int us)
451 {
452 	struct ath_hal_5212 *ahp = AH5212(ah);
453 
454 	if (us > ath_hal_mac_usec(ah, 0xffff)) {
455 		HALDEBUG(ah, HAL_DEBUG_ANY, "%s: bad SIFS time %u\n",
456 		    __func__, us);
457 		ahp->ah_sifstime = (u_int) -1;	/* restore default handling */
458 		return AH_FALSE;
459 	} else {
460 		/* convert to system clocks */
461 		OS_REG_WRITE(ah, AR_D_GBL_IFS_SIFS, ath_hal_mac_clks(ah, us-2));
462 		ahp->ah_sifstime = us;
463 		return AH_TRUE;
464 	}
465 }
466 
467 u_int
468 ar5212GetSifsTime(struct ath_hal *ah)
469 {
470 	u_int clks = OS_REG_READ(ah, AR_D_GBL_IFS_SIFS) & 0xffff;
471 	return ath_hal_mac_usec(ah, clks)+2;	/* convert from system clocks */
472 }
473 
474 HAL_BOOL
475 ar5212SetSlotTime(struct ath_hal *ah, u_int us)
476 {
477 	struct ath_hal_5212 *ahp = AH5212(ah);
478 
479 	if (us < HAL_SLOT_TIME_6 || us > ath_hal_mac_usec(ah, 0xffff)) {
480 		HALDEBUG(ah, HAL_DEBUG_ANY, "%s: bad slot time %u\n",
481 		    __func__, us);
482 		ahp->ah_slottime = (u_int) -1;	/* restore default handling */
483 		return AH_FALSE;
484 	} else {
485 		/* convert to system clocks */
486 		OS_REG_WRITE(ah, AR_D_GBL_IFS_SLOT, ath_hal_mac_clks(ah, us));
487 		ahp->ah_slottime = us;
488 		return AH_TRUE;
489 	}
490 }
491 
492 u_int
493 ar5212GetSlotTime(struct ath_hal *ah)
494 {
495 	u_int clks = OS_REG_READ(ah, AR_D_GBL_IFS_SLOT) & 0xffff;
496 	return ath_hal_mac_usec(ah, clks);	/* convert from system clocks */
497 }
498 
499 HAL_BOOL
500 ar5212SetAckTimeout(struct ath_hal *ah, u_int us)
501 {
502 	struct ath_hal_5212 *ahp = AH5212(ah);
503 
504 	if (us > ath_hal_mac_usec(ah, MS(0xffffffff, AR_TIME_OUT_ACK))) {
505 		HALDEBUG(ah, HAL_DEBUG_ANY, "%s: bad ack timeout %u\n",
506 		    __func__, us);
507 		ahp->ah_acktimeout = (u_int) -1; /* restore default handling */
508 		return AH_FALSE;
509 	} else {
510 		/* convert to system clocks */
511 		OS_REG_RMW_FIELD(ah, AR_TIME_OUT,
512 			AR_TIME_OUT_ACK, ath_hal_mac_clks(ah, us));
513 		ahp->ah_acktimeout = us;
514 		return AH_TRUE;
515 	}
516 }
517 
518 u_int
519 ar5212GetAckTimeout(struct ath_hal *ah)
520 {
521 	u_int clks = MS(OS_REG_READ(ah, AR_TIME_OUT), AR_TIME_OUT_ACK);
522 	return ath_hal_mac_usec(ah, clks);	/* convert from system clocks */
523 }
524 
525 u_int
526 ar5212GetAckCTSRate(struct ath_hal *ah)
527 {
528 	return ((AH5212(ah)->ah_staId1Defaults & AR_STA_ID1_ACKCTS_6MB) == 0);
529 }
530 
531 HAL_BOOL
532 ar5212SetAckCTSRate(struct ath_hal *ah, u_int high)
533 {
534 	struct ath_hal_5212 *ahp = AH5212(ah);
535 
536 	if (high) {
537 		OS_REG_CLR_BIT(ah, AR_STA_ID1, AR_STA_ID1_ACKCTS_6MB);
538 		ahp->ah_staId1Defaults &= ~AR_STA_ID1_ACKCTS_6MB;
539 	} else {
540 		OS_REG_SET_BIT(ah, AR_STA_ID1, AR_STA_ID1_ACKCTS_6MB);
541 		ahp->ah_staId1Defaults |= AR_STA_ID1_ACKCTS_6MB;
542 	}
543 	return AH_TRUE;
544 }
545 
546 HAL_BOOL
547 ar5212SetCTSTimeout(struct ath_hal *ah, u_int us)
548 {
549 	struct ath_hal_5212 *ahp = AH5212(ah);
550 
551 	if (us > ath_hal_mac_usec(ah, MS(0xffffffff, AR_TIME_OUT_CTS))) {
552 		HALDEBUG(ah, HAL_DEBUG_ANY, "%s: bad cts timeout %u\n",
553 		    __func__, us);
554 		ahp->ah_ctstimeout = (u_int) -1; /* restore default handling */
555 		return AH_FALSE;
556 	} else {
557 		/* convert to system clocks */
558 		OS_REG_RMW_FIELD(ah, AR_TIME_OUT,
559 			AR_TIME_OUT_CTS, ath_hal_mac_clks(ah, us));
560 		ahp->ah_ctstimeout = us;
561 		return AH_TRUE;
562 	}
563 }
564 
565 u_int
566 ar5212GetCTSTimeout(struct ath_hal *ah)
567 {
568 	u_int clks = MS(OS_REG_READ(ah, AR_TIME_OUT), AR_TIME_OUT_CTS);
569 	return ath_hal_mac_usec(ah, clks);	/* convert from system clocks */
570 }
571 
572 /* Setup decompression for given key index */
573 HAL_BOOL
574 ar5212SetDecompMask(struct ath_hal *ah, uint16_t keyidx, int en)
575 {
576 	struct ath_hal_5212 *ahp = AH5212(ah);
577 
578         if (keyidx >= HAL_DECOMP_MASK_SIZE)
579                 return AH_FALSE;
580         OS_REG_WRITE(ah, AR_DCM_A, keyidx);
581         OS_REG_WRITE(ah, AR_DCM_D, en ? AR_DCM_D_EN : 0);
582         ahp->ah_decompMask[keyidx] = en;
583 
584         return AH_TRUE;
585 }
586 
587 /* Setup coverage class */
588 void
589 ar5212SetCoverageClass(struct ath_hal *ah, uint8_t coverageclass, int now)
590 {
591 	uint32_t slot, timeout, eifs;
592 	u_int clkRate;
593 
594 	AH_PRIVATE(ah)->ah_coverageClass = coverageclass;
595 
596 	if (now) {
597 		if (AH_PRIVATE(ah)->ah_coverageClass == 0)
598 			return;
599 
600 		/* Don't apply coverage class to non A channels */
601 		if (!IEEE80211_IS_CHAN_A(AH_PRIVATE(ah)->ah_curchan))
602 			return;
603 
604 		/* Get core clock rate */
605 		clkRate = ath_hal_mac_clks(ah, 1);
606 
607 		/* Compute EIFS */
608 		slot = coverageclass * 3 * clkRate;
609 		eifs = coverageclass * 6 * clkRate;
610 		if (IEEE80211_IS_CHAN_HALF(AH_PRIVATE(ah)->ah_curchan)) {
611 			slot += IFS_SLOT_HALF_RATE;
612 			eifs += IFS_EIFS_HALF_RATE;
613 		} else if (IEEE80211_IS_CHAN_QUARTER(AH_PRIVATE(ah)->ah_curchan)) {
614 			slot += IFS_SLOT_QUARTER_RATE;
615 			eifs += IFS_EIFS_QUARTER_RATE;
616 		} else { /* full rate */
617 			slot += IFS_SLOT_FULL_RATE;
618 			eifs += IFS_EIFS_FULL_RATE;
619 		}
620 
621 		/*
622 		 * Add additional time for air propagation for ACK and CTS
623 		 * timeouts. This value is in core clocks.
624   		 */
625 		timeout = ACK_CTS_TIMEOUT_11A + (coverageclass * 3 * clkRate);
626 
627 		/*
628 		 * Write the values: slot, eifs, ack/cts timeouts.
629 		 */
630 		OS_REG_WRITE(ah, AR_D_GBL_IFS_SLOT, slot);
631 		OS_REG_WRITE(ah, AR_D_GBL_IFS_EIFS, eifs);
632 		OS_REG_WRITE(ah, AR_TIME_OUT,
633 			  SM(timeout, AR_TIME_OUT_CTS)
634 			| SM(timeout, AR_TIME_OUT_ACK));
635 	}
636 }
637 
638 HAL_STATUS
639 ar5212SetQuiet(struct ath_hal *ah, uint32_t period, uint32_t duration,
640     uint32_t nextStart, HAL_QUIET_FLAG flag)
641 {
642 	OS_REG_WRITE(ah, AR_QUIET2, period | (duration << AR_QUIET2_QUIET_DUR_S));
643 	if (flag & HAL_QUIET_ENABLE) {
644 		OS_REG_WRITE(ah, AR_QUIET1, nextStart | (1 << 16));
645 	}
646 	else {
647 		OS_REG_WRITE(ah, AR_QUIET1, nextStart);
648 	}
649 	return HAL_OK;
650 }
651 
652 void
653 ar5212SetPCUConfig(struct ath_hal *ah)
654 {
655 	ar5212SetOperatingMode(ah, AH_PRIVATE(ah)->ah_opmode);
656 }
657 
658 /*
659  * Return whether an external 32KHz crystal should be used
660  * to reduce power consumption when sleeping.  We do so if
661  * the crystal is present (obtained from EEPROM) and if we
662  * are not running as an AP and are configured to use it.
663  */
664 HAL_BOOL
665 ar5212Use32KHzclock(struct ath_hal *ah, HAL_OPMODE opmode)
666 {
667 	if (opmode != HAL_M_HOSTAP) {
668 		struct ath_hal_5212 *ahp = AH5212(ah);
669 		return ath_hal_eepromGetFlag(ah, AR_EEP_32KHZCRYSTAL) &&
670 		       (ahp->ah_enable32kHzClock == USE_32KHZ ||
671 		        ahp->ah_enable32kHzClock == AUTO_32KHZ);
672 	} else
673 		return AH_FALSE;
674 }
675 
676 /*
677  * If 32KHz clock exists, use it to lower power consumption during sleep
678  *
679  * Note: If clock is set to 32 KHz, delays on accessing certain
680  *       baseband registers (27-31, 124-127) are required.
681  */
682 void
683 ar5212SetupClock(struct ath_hal *ah, HAL_OPMODE opmode)
684 {
685 	if (ar5212Use32KHzclock(ah, opmode)) {
686 		/*
687 		 * Enable clocks to be turned OFF in BB during sleep
688 		 * and also enable turning OFF 32MHz/40MHz Refclk
689 		 * from A2.
690 		 */
691 		OS_REG_WRITE(ah, AR_PHY_SLEEP_CTR_CONTROL, 0x1f);
692 		OS_REG_WRITE(ah, AR_PHY_REFCLKPD,
693 		    IS_RAD5112_ANY(ah) || IS_5413(ah) ? 0x14 : 0x18);
694 		OS_REG_RMW_FIELD(ah, AR_USEC, AR_USEC_USEC32, 1);
695 		OS_REG_WRITE(ah, AR_TSF_PARM, 61);  /* 32 KHz TSF incr */
696 		OS_REG_RMW_FIELD(ah, AR_PCICFG, AR_PCICFG_SCLK_SEL, 1);
697 
698 		if (IS_2413(ah) || IS_5413(ah) || IS_2417(ah)) {
699 			OS_REG_WRITE(ah, AR_PHY_SLEEP_CTR_LIMIT,   0x26);
700 			OS_REG_WRITE(ah, AR_PHY_SLEEP_SCAL,        0x0d);
701 			OS_REG_WRITE(ah, AR_PHY_M_SLEEP,           0x07);
702 			OS_REG_WRITE(ah, AR_PHY_REFCLKDLY,         0x3f);
703 			/* # Set sleep clock rate to 32 KHz. */
704 			OS_REG_RMW_FIELD(ah, AR_PCICFG, AR_PCICFG_SCLK_RATE_IND, 0x2);
705 		} else {
706 			OS_REG_WRITE(ah, AR_PHY_SLEEP_CTR_LIMIT,   0x0a);
707 			OS_REG_WRITE(ah, AR_PHY_SLEEP_SCAL,        0x0c);
708 			OS_REG_WRITE(ah, AR_PHY_M_SLEEP,           0x03);
709 			OS_REG_WRITE(ah, AR_PHY_REFCLKDLY,         0x20);
710 			OS_REG_RMW_FIELD(ah, AR_PCICFG, AR_PCICFG_SCLK_RATE_IND, 0x3);
711 		}
712 	} else {
713 		OS_REG_RMW_FIELD(ah, AR_PCICFG, AR_PCICFG_SCLK_RATE_IND, 0x0);
714 		OS_REG_RMW_FIELD(ah, AR_PCICFG, AR_PCICFG_SCLK_SEL, 0);
715 
716 		OS_REG_WRITE(ah, AR_TSF_PARM, 1);	/* 32MHz TSF inc */
717 
718 		OS_REG_WRITE(ah, AR_PHY_SLEEP_CTR_CONTROL, 0x1f);
719 		OS_REG_WRITE(ah, AR_PHY_SLEEP_CTR_LIMIT,   0x7f);
720 
721 		if (IS_2417(ah))
722 			OS_REG_WRITE(ah, AR_PHY_SLEEP_SCAL, 0x0a);
723 		else if (IS_HB63(ah))
724 			OS_REG_WRITE(ah, AR_PHY_SLEEP_SCAL, 0x32);
725 		else
726 			OS_REG_WRITE(ah, AR_PHY_SLEEP_SCAL, 0x0e);
727 		OS_REG_WRITE(ah, AR_PHY_M_SLEEP,           0x0c);
728 		OS_REG_WRITE(ah, AR_PHY_REFCLKDLY,         0xff);
729 		OS_REG_WRITE(ah, AR_PHY_REFCLKPD,
730 		    IS_RAD5112_ANY(ah) || IS_5413(ah) || IS_2417(ah) ? 0x14 : 0x18);
731 		OS_REG_RMW_FIELD(ah, AR_USEC, AR_USEC_USEC32,
732 		    IS_RAD5112_ANY(ah) || IS_5413(ah) ? 39 : 31);
733 	}
734 }
735 
736 /*
737  * If 32KHz clock exists, turn it off and turn back on the 32Mhz
738  */
739 void
740 ar5212RestoreClock(struct ath_hal *ah, HAL_OPMODE opmode)
741 {
742 	if (ar5212Use32KHzclock(ah, opmode)) {
743 		/* # Set sleep clock rate back to 32 MHz. */
744 		OS_REG_RMW_FIELD(ah, AR_PCICFG, AR_PCICFG_SCLK_RATE_IND, 0);
745 		OS_REG_RMW_FIELD(ah, AR_PCICFG, AR_PCICFG_SCLK_SEL, 0);
746 
747 		OS_REG_WRITE(ah, AR_TSF_PARM, 1);	/* 32 MHz TSF incr */
748 		OS_REG_RMW_FIELD(ah, AR_USEC, AR_USEC_USEC32,
749 		    IS_RAD5112_ANY(ah) || IS_5413(ah) ? 39 : 31);
750 
751 		/*
752 		 * Restore BB registers to power-on defaults
753 		 */
754 		OS_REG_WRITE(ah, AR_PHY_SLEEP_CTR_CONTROL, 0x1f);
755 		OS_REG_WRITE(ah, AR_PHY_SLEEP_CTR_LIMIT,   0x7f);
756 		OS_REG_WRITE(ah, AR_PHY_SLEEP_SCAL,        0x0e);
757 		OS_REG_WRITE(ah, AR_PHY_M_SLEEP,           0x0c);
758 		OS_REG_WRITE(ah, AR_PHY_REFCLKDLY,         0xff);
759 		OS_REG_WRITE(ah, AR_PHY_REFCLKPD,
760 		    IS_RAD5112_ANY(ah) || IS_5413(ah) ?  0x14 : 0x18);
761 	}
762 }
763 
764 /*
765  * Adjust NF based on statistical values for 5GHz frequencies.
766  * Default method: this may be overridden by the rf backend.
767  */
768 int16_t
769 ar5212GetNfAdjust(struct ath_hal *ah, const HAL_CHANNEL_INTERNAL *c)
770 {
771 	static const struct {
772 		uint16_t freqLow;
773 		int16_t	  adjust;
774 	} adjustDef[] = {
775 		{ 5790,	11 },	/* NB: ordered high -> low */
776 		{ 5730, 10 },
777 		{ 5690,  9 },
778 		{ 5660,  8 },
779 		{ 5610,  7 },
780 		{ 5530,  5 },
781 		{ 5450,  4 },
782 		{ 5379,  2 },
783 		{ 5209,  0 },
784 		{ 3000,  1 },
785 		{    0,  0 },
786 	};
787 	int i;
788 
789 	for (i = 0; c->channel <= adjustDef[i].freqLow; i++)
790 		;
791 	return adjustDef[i].adjust;
792 }
793 
794 HAL_STATUS
795 ar5212GetCapability(struct ath_hal *ah, HAL_CAPABILITY_TYPE type,
796 	uint32_t capability, uint32_t *result)
797 {
798 #define	MACVERSION(ah)	AH_PRIVATE(ah)->ah_macVersion
799 	struct ath_hal_5212 *ahp = AH5212(ah);
800 	const HAL_CAPABILITIES *pCap = &AH_PRIVATE(ah)->ah_caps;
801 	const struct ar5212AniState *ani;
802 
803 	switch (type) {
804 	case HAL_CAP_CIPHER:		/* cipher handled in hardware */
805 		switch (capability) {
806 		case HAL_CIPHER_AES_CCM:
807 			return pCap->halCipherAesCcmSupport ?
808 				HAL_OK : HAL_ENOTSUPP;
809 		case HAL_CIPHER_AES_OCB:
810 		case HAL_CIPHER_TKIP:
811 		case HAL_CIPHER_WEP:
812 		case HAL_CIPHER_MIC:
813 		case HAL_CIPHER_CLR:
814 			return HAL_OK;
815 		default:
816 			return HAL_ENOTSUPP;
817 		}
818 	case HAL_CAP_TKIP_MIC:		/* handle TKIP MIC in hardware */
819 		switch (capability) {
820 		case 0:			/* hardware capability */
821 			return HAL_OK;
822 		case 1:
823 			return (ahp->ah_staId1Defaults &
824 			    AR_STA_ID1_CRPT_MIC_ENABLE) ?  HAL_OK : HAL_ENXIO;
825 		}
826 		return HAL_EINVAL;
827 	case HAL_CAP_TKIP_SPLIT:	/* hardware TKIP uses split keys */
828 		switch (capability) {
829 		case 0:			/* hardware capability */
830 			return pCap->halTkipMicTxRxKeySupport ?
831 				HAL_ENXIO : HAL_OK;
832 		case 1:			/* current setting */
833 			return (ahp->ah_miscMode &
834 			    AR_MISC_MODE_MIC_NEW_LOC_ENABLE) ? HAL_ENXIO : HAL_OK;
835 		}
836 		return HAL_EINVAL;
837 	case HAL_CAP_WME_TKIPMIC:	/* hardware can do TKIP MIC w/ WMM */
838 		/* XXX move to capability bit */
839 		return MACVERSION(ah) > AR_SREV_VERSION_VENICE ||
840 		    (MACVERSION(ah) == AR_SREV_VERSION_VENICE &&
841 		     AH_PRIVATE(ah)->ah_macRev >= 8) ? HAL_OK : HAL_ENOTSUPP;
842 	case HAL_CAP_DIVERSITY:		/* hardware supports fast diversity */
843 		switch (capability) {
844 		case 0:			/* hardware capability */
845 			return HAL_OK;
846 		case 1:			/* current setting */
847 			return ahp->ah_diversity ? HAL_OK : HAL_ENXIO;
848 		case HAL_CAP_STRONG_DIV:
849 			*result = OS_REG_READ(ah, AR_PHY_RESTART);
850 			*result = MS(*result, AR_PHY_RESTART_DIV_GC);
851 			return HAL_OK;
852 		}
853 		return HAL_EINVAL;
854 	case HAL_CAP_DIAG:
855 		*result = AH_PRIVATE(ah)->ah_diagreg;
856 		return HAL_OK;
857 	case HAL_CAP_TPC:
858 		switch (capability) {
859 		case 0:			/* hardware capability */
860 			return HAL_OK;
861 		case 1:
862 			return ahp->ah_tpcEnabled ? HAL_OK : HAL_ENXIO;
863 		}
864 		return HAL_OK;
865 	case HAL_CAP_PHYDIAG:		/* radar pulse detection capability */
866 		switch (capability) {
867 		case HAL_CAP_RADAR:
868 			return ath_hal_eepromGetFlag(ah, AR_EEP_AMODE) ?
869 			    HAL_OK: HAL_ENXIO;
870 		case HAL_CAP_AR:
871 			return (ath_hal_eepromGetFlag(ah, AR_EEP_GMODE) ||
872 			    ath_hal_eepromGetFlag(ah, AR_EEP_BMODE)) ?
873 			       HAL_OK: HAL_ENXIO;
874 		}
875 		return HAL_ENXIO;
876 	case HAL_CAP_MCAST_KEYSRCH:	/* multicast frame keycache search */
877 		switch (capability) {
878 		case 0:			/* hardware capability */
879 			return pCap->halMcastKeySrchSupport ? HAL_OK : HAL_ENXIO;
880 		case 1:
881 			return (ahp->ah_staId1Defaults &
882 			    AR_STA_ID1_MCAST_KSRCH) ? HAL_OK : HAL_ENXIO;
883 		}
884 		return HAL_EINVAL;
885 	case HAL_CAP_TSF_ADJUST:	/* hardware has beacon tsf adjust */
886 		switch (capability) {
887 		case 0:			/* hardware capability */
888 			return pCap->halTsfAddSupport ? HAL_OK : HAL_ENOTSUPP;
889 		case 1:
890 			return (ahp->ah_miscMode & AR_MISC_MODE_TX_ADD_TSF) ?
891 				HAL_OK : HAL_ENXIO;
892 		}
893 		return HAL_EINVAL;
894 	case HAL_CAP_TPC_ACK:
895 		*result = MS(ahp->ah_macTPC, AR_TPC_ACK);
896 		return HAL_OK;
897 	case HAL_CAP_TPC_CTS:
898 		*result = MS(ahp->ah_macTPC, AR_TPC_CTS);
899 		return HAL_OK;
900 	case HAL_CAP_INTMIT:		/* interference mitigation */
901 		switch (capability) {
902 		case HAL_CAP_INTMIT_PRESENT:		/* hardware capability */
903 			return HAL_OK;
904 		case HAL_CAP_INTMIT_ENABLE:
905 			return (ahp->ah_procPhyErr & HAL_ANI_ENA) ?
906 				HAL_OK : HAL_ENXIO;
907 		case HAL_CAP_INTMIT_NOISE_IMMUNITY_LEVEL:
908 		case HAL_CAP_INTMIT_OFDM_WEAK_SIGNAL_LEVEL:
909 		case HAL_CAP_INTMIT_CCK_WEAK_SIGNAL_THR:
910 		case HAL_CAP_INTMIT_FIRSTEP_LEVEL:
911 		case HAL_CAP_INTMIT_SPUR_IMMUNITY_LEVEL:
912 			ani = ar5212AniGetCurrentState(ah);
913 			if (ani == AH_NULL)
914 				return HAL_ENXIO;
915 			switch (capability) {
916 			case 2:	*result = ani->noiseImmunityLevel; break;
917 			case 3: *result = !ani->ofdmWeakSigDetectOff; break;
918 			case 4: *result = ani->cckWeakSigThreshold; break;
919 			case 5: *result = ani->firstepLevel; break;
920 			case 6: *result = ani->spurImmunityLevel; break;
921 			}
922 			return HAL_OK;
923 		}
924 		return HAL_EINVAL;
925 	default:
926 		return ath_hal_getcapability(ah, type, capability, result);
927 	}
928 #undef MACVERSION
929 }
930 
931 HAL_BOOL
932 ar5212SetCapability(struct ath_hal *ah, HAL_CAPABILITY_TYPE type,
933 	uint32_t capability, uint32_t setting, HAL_STATUS *status)
934 {
935 #define	N(a)	(sizeof(a)/sizeof(a[0]))
936 	struct ath_hal_5212 *ahp = AH5212(ah);
937 	const HAL_CAPABILITIES *pCap = &AH_PRIVATE(ah)->ah_caps;
938 	uint32_t v;
939 
940 	switch (type) {
941 	case HAL_CAP_TKIP_MIC:		/* handle TKIP MIC in hardware */
942 		if (setting)
943 			ahp->ah_staId1Defaults |= AR_STA_ID1_CRPT_MIC_ENABLE;
944 		else
945 			ahp->ah_staId1Defaults &= ~AR_STA_ID1_CRPT_MIC_ENABLE;
946 		return AH_TRUE;
947 	case HAL_CAP_TKIP_SPLIT:	/* hardware TKIP uses split keys */
948 		if (!pCap->halTkipMicTxRxKeySupport)
949 			return AH_FALSE;
950 		/* NB: true =>'s use split key cache layout */
951 		if (setting)
952 			ahp->ah_miscMode &= ~AR_MISC_MODE_MIC_NEW_LOC_ENABLE;
953 		else
954 			ahp->ah_miscMode |= AR_MISC_MODE_MIC_NEW_LOC_ENABLE;
955 		/* NB: write here so keys can be setup w/o a reset */
956 		OS_REG_WRITE(ah, AR_MISC_MODE, OS_REG_READ(ah, AR_MISC_MODE) | ahp->ah_miscMode);
957 		return AH_TRUE;
958 	case HAL_CAP_DIVERSITY:
959 		switch (capability) {
960 		case 0:
961 			return AH_FALSE;
962 		case 1:	/* setting */
963 			if (ahp->ah_phyPowerOn) {
964 				if (capability == HAL_CAP_STRONG_DIV) {
965 					v = OS_REG_READ(ah, AR_PHY_CCK_DETECT);
966 					if (setting)
967 						v |= AR_PHY_CCK_DETECT_BB_ENABLE_ANT_FAST_DIV;
968 					else
969 						v &= ~AR_PHY_CCK_DETECT_BB_ENABLE_ANT_FAST_DIV;
970 					OS_REG_WRITE(ah, AR_PHY_CCK_DETECT, v);
971 				}
972 			}
973 			ahp->ah_diversity = (setting != 0);
974 			return AH_TRUE;
975 
976 		case HAL_CAP_STRONG_DIV:
977 			if (! ahp->ah_phyPowerOn)
978 				return AH_FALSE;
979 			v = OS_REG_READ(ah, AR_PHY_RESTART);
980 			v &= ~AR_PHY_RESTART_DIV_GC;
981 			v |= SM(setting, AR_PHY_RESTART_DIV_GC);
982 			OS_REG_WRITE(ah, AR_PHY_RESTART, v);
983 			return AH_TRUE;
984 		default:
985 			return AH_FALSE;
986 		}
987 	case HAL_CAP_DIAG:		/* hardware diagnostic support */
988 		/*
989 		 * NB: could split this up into virtual capabilities,
990 		 *     (e.g. 1 => ACK, 2 => CTS, etc.) but it hardly
991 		 *     seems worth the additional complexity.
992 		 */
993 		AH_PRIVATE(ah)->ah_diagreg = setting;
994 		OS_REG_WRITE(ah, AR_DIAG_SW, AH_PRIVATE(ah)->ah_diagreg);
995 		return AH_TRUE;
996 	case HAL_CAP_TPC:
997 		ahp->ah_tpcEnabled = (setting != 0);
998 		return AH_TRUE;
999 	case HAL_CAP_MCAST_KEYSRCH:	/* multicast frame keycache search */
1000 		if (setting)
1001 			ahp->ah_staId1Defaults |= AR_STA_ID1_MCAST_KSRCH;
1002 		else
1003 			ahp->ah_staId1Defaults &= ~AR_STA_ID1_MCAST_KSRCH;
1004 		return AH_TRUE;
1005 	case HAL_CAP_TPC_ACK:
1006 	case HAL_CAP_TPC_CTS:
1007 		setting += ahp->ah_txPowerIndexOffset;
1008 		if (setting > 63)
1009 			setting = 63;
1010 		if (type == HAL_CAP_TPC_ACK) {
1011 			ahp->ah_macTPC &= AR_TPC_ACK;
1012 			ahp->ah_macTPC |= MS(setting, AR_TPC_ACK);
1013 		} else {
1014 			ahp->ah_macTPC &= AR_TPC_CTS;
1015 			ahp->ah_macTPC |= MS(setting, AR_TPC_CTS);
1016 		}
1017 		OS_REG_WRITE(ah, AR_TPC, ahp->ah_macTPC);
1018 		return AH_TRUE;
1019 	case HAL_CAP_INTMIT: {		/* interference mitigation */
1020 		/* This maps the public ANI commands to the internal ANI commands */
1021 		/* Private: HAL_ANI_CMD; Public: HAL_CAP_INTMIT_CMD */
1022 		static const HAL_ANI_CMD cmds[] = {
1023 			HAL_ANI_PRESENT,
1024 			HAL_ANI_MODE,
1025 			HAL_ANI_NOISE_IMMUNITY_LEVEL,
1026 			HAL_ANI_OFDM_WEAK_SIGNAL_DETECTION,
1027 			HAL_ANI_CCK_WEAK_SIGNAL_THR,
1028 			HAL_ANI_FIRSTEP_LEVEL,
1029 			HAL_ANI_SPUR_IMMUNITY_LEVEL,
1030 		};
1031 		return capability < N(cmds) ?
1032 			AH5212(ah)->ah_aniControl(ah, cmds[capability], setting) :
1033 			AH_FALSE;
1034 	}
1035 	case HAL_CAP_TSF_ADJUST:	/* hardware has beacon tsf adjust */
1036 		if (pCap->halTsfAddSupport) {
1037 			if (setting)
1038 				ahp->ah_miscMode |= AR_MISC_MODE_TX_ADD_TSF;
1039 			else
1040 				ahp->ah_miscMode &= ~AR_MISC_MODE_TX_ADD_TSF;
1041 			return AH_TRUE;
1042 		}
1043 		/* fall thru... */
1044 	default:
1045 		return ath_hal_setcapability(ah, type, capability,
1046 				setting, status);
1047 	}
1048 #undef N
1049 }
1050 
1051 HAL_BOOL
1052 ar5212GetDiagState(struct ath_hal *ah, int request,
1053 	const void *args, uint32_t argsize,
1054 	void **result, uint32_t *resultsize)
1055 {
1056 	struct ath_hal_5212 *ahp = AH5212(ah);
1057 	HAL_ANI_STATS *astats;
1058 
1059 	(void) ahp;
1060 	if (ath_hal_getdiagstate(ah, request, args, argsize, result, resultsize))
1061 		return AH_TRUE;
1062 	switch (request) {
1063 	case HAL_DIAG_EEPROM:
1064 	case HAL_DIAG_EEPROM_EXP_11A:
1065 	case HAL_DIAG_EEPROM_EXP_11B:
1066 	case HAL_DIAG_EEPROM_EXP_11G:
1067 	case HAL_DIAG_RFGAIN:
1068 		return ath_hal_eepromDiag(ah, request,
1069 		    args, argsize, result, resultsize);
1070 	case HAL_DIAG_RFGAIN_CURSTEP:
1071 		*result = __DECONST(void *, ahp->ah_gainValues.currStep);
1072 		*resultsize = (*result == AH_NULL) ?
1073 			0 : sizeof(GAIN_OPTIMIZATION_STEP);
1074 		return AH_TRUE;
1075 	case HAL_DIAG_PCDAC:
1076 		*result = ahp->ah_pcdacTable;
1077 		*resultsize = ahp->ah_pcdacTableSize;
1078 		return AH_TRUE;
1079 	case HAL_DIAG_TXRATES:
1080 		*result = &ahp->ah_ratesArray[0];
1081 		*resultsize = sizeof(ahp->ah_ratesArray);
1082 		return AH_TRUE;
1083 	case HAL_DIAG_ANI_CURRENT:
1084 		*result = ar5212AniGetCurrentState(ah);
1085 		*resultsize = (*result == AH_NULL) ?
1086 			0 : sizeof(struct ar5212AniState);
1087 		return AH_TRUE;
1088 	case HAL_DIAG_ANI_STATS:
1089 		OS_MEMZERO(&ahp->ext_ani_stats, sizeof(ahp->ext_ani_stats));
1090 		astats = ar5212AniGetCurrentStats(ah);
1091 		if (astats == NULL) {
1092 			*result = NULL;
1093 			*resultsize = 0;
1094 		} else {
1095 			OS_MEMCPY(&ahp->ext_ani_stats, astats, sizeof(HAL_ANI_STATS));
1096 			*result = &ahp->ext_ani_stats;
1097 			*resultsize = sizeof(ahp->ext_ani_stats);
1098 		}
1099 		return AH_TRUE;
1100 	case HAL_DIAG_ANI_CMD:
1101 		if (argsize != 2*sizeof(uint32_t))
1102 			return AH_FALSE;
1103 		AH5212(ah)->ah_aniControl(ah, ((const uint32_t *)args)[0],
1104 			((const uint32_t *)args)[1]);
1105 		return AH_TRUE;
1106 	case HAL_DIAG_ANI_PARAMS:
1107 		/*
1108 		 * NB: We assume struct ar5212AniParams is identical
1109 		 * to HAL_ANI_PARAMS; if they diverge then we'll need
1110 		 * to handle it here
1111 		 */
1112 		if (argsize == 0 && args == AH_NULL) {
1113 			struct ar5212AniState *aniState =
1114 			    ar5212AniGetCurrentState(ah);
1115 			if (aniState == AH_NULL)
1116 				return AH_FALSE;
1117 			*result = __DECONST(void *, aniState->params);
1118 			*resultsize = sizeof(struct ar5212AniParams);
1119 			return AH_TRUE;
1120 		} else {
1121 			if (argsize != sizeof(struct ar5212AniParams))
1122 				return AH_FALSE;
1123 			return ar5212AniSetParams(ah, args, args);
1124 		}
1125 		break;
1126 	}
1127 	return AH_FALSE;
1128 }
1129 
1130 /*
1131  * Check whether there's an in-progress NF completion.
1132  *
1133  * Returns AH_TRUE if there's a in-progress NF calibration, AH_FALSE
1134  * otherwise.
1135  */
1136 HAL_BOOL
1137 ar5212IsNFCalInProgress(struct ath_hal *ah)
1138 {
1139 	if (OS_REG_READ(ah, AR_PHY_AGC_CONTROL) & AR_PHY_AGC_CONTROL_NF)
1140 		return AH_TRUE;
1141 	return AH_FALSE;
1142 }
1143 
1144 /*
1145  * Wait for an in-progress NF calibration to complete.
1146  *
1147  * The completion function waits "i" times 10uS.
1148  * It returns AH_TRUE if the NF calibration completed (or was never
1149  * in progress); AH_FALSE if it was still in progress after "i" checks.
1150  */
1151 HAL_BOOL
1152 ar5212WaitNFCalComplete(struct ath_hal *ah, int i)
1153 {
1154 	int j;
1155 	if (i <= 0)
1156 		i = 1;	  /* it should run at least once */
1157 	for (j = 0; j < i; j++) {
1158 		if (! ar5212IsNFCalInProgress(ah))
1159 			return AH_TRUE;
1160 		OS_DELAY(10);
1161 	}
1162 	return AH_FALSE;
1163 }
1164 
1165 void
1166 ar5212EnableDfs(struct ath_hal *ah, HAL_PHYERR_PARAM *pe)
1167 {
1168 	uint32_t val;
1169 	val = OS_REG_READ(ah, AR_PHY_RADAR_0);
1170 
1171 	if (pe->pe_firpwr != HAL_PHYERR_PARAM_NOVAL) {
1172 		val &= ~AR_PHY_RADAR_0_FIRPWR;
1173 		val |= SM(pe->pe_firpwr, AR_PHY_RADAR_0_FIRPWR);
1174 	}
1175 	if (pe->pe_rrssi != HAL_PHYERR_PARAM_NOVAL) {
1176 		val &= ~AR_PHY_RADAR_0_RRSSI;
1177 		val |= SM(pe->pe_rrssi, AR_PHY_RADAR_0_RRSSI);
1178 	}
1179 	if (pe->pe_height != HAL_PHYERR_PARAM_NOVAL) {
1180 		val &= ~AR_PHY_RADAR_0_HEIGHT;
1181 		val |= SM(pe->pe_height, AR_PHY_RADAR_0_HEIGHT);
1182 	}
1183 	if (pe->pe_prssi != HAL_PHYERR_PARAM_NOVAL) {
1184 		val &= ~AR_PHY_RADAR_0_PRSSI;
1185 		val |= SM(pe->pe_prssi, AR_PHY_RADAR_0_PRSSI);
1186 	}
1187 	if (pe->pe_inband != HAL_PHYERR_PARAM_NOVAL) {
1188 		val &= ~AR_PHY_RADAR_0_INBAND;
1189 		val |= SM(pe->pe_inband, AR_PHY_RADAR_0_INBAND);
1190 	}
1191 	if (pe->pe_enabled)
1192 		val |= AR_PHY_RADAR_0_ENA;
1193 	else
1194 		val &= ~ AR_PHY_RADAR_0_ENA;
1195 
1196 	if (IS_5413(ah)) {
1197 
1198 		if (pe->pe_blockradar == 1)
1199 			OS_REG_SET_BIT(ah, AR_PHY_RADAR_2,
1200 			    AR_PHY_RADAR_2_BLOCKOFDMWEAK);
1201 		else
1202 			OS_REG_CLR_BIT(ah, AR_PHY_RADAR_2,
1203 			    AR_PHY_RADAR_2_BLOCKOFDMWEAK);
1204 
1205 		if (pe->pe_en_relstep_check == 1)
1206 			OS_REG_SET_BIT(ah, AR_PHY_RADAR_2,
1207 			    AR_PHY_RADAR_2_ENRELSTEPCHK);
1208 		else
1209 			OS_REG_CLR_BIT(ah, AR_PHY_RADAR_2,
1210 			    AR_PHY_RADAR_2_ENRELSTEPCHK);
1211 
1212 		if (pe->pe_usefir128 == 1)
1213 			OS_REG_SET_BIT(ah, AR_PHY_RADAR_2,
1214 			    AR_PHY_RADAR_2_USEFIR128);
1215 		else
1216 			OS_REG_CLR_BIT(ah, AR_PHY_RADAR_2,
1217 			    AR_PHY_RADAR_2_USEFIR128);
1218 
1219 		if (pe->pe_enmaxrssi == 1)
1220 			OS_REG_SET_BIT(ah, AR_PHY_RADAR_2,
1221 			    AR_PHY_RADAR_2_ENMAXRSSI);
1222 		else
1223 			OS_REG_CLR_BIT(ah, AR_PHY_RADAR_2,
1224 			    AR_PHY_RADAR_2_ENMAXRSSI);
1225 
1226 		if (pe->pe_enrelpwr == 1)
1227 			OS_REG_SET_BIT(ah, AR_PHY_RADAR_2,
1228 			    AR_PHY_RADAR_2_ENRELPWRCHK);
1229 		else
1230 			OS_REG_CLR_BIT(ah, AR_PHY_RADAR_2,
1231 			    AR_PHY_RADAR_2_ENRELPWRCHK);
1232 
1233 		if (pe->pe_relpwr != HAL_PHYERR_PARAM_NOVAL)
1234 			OS_REG_RMW_FIELD(ah, AR_PHY_RADAR_2,
1235 			    AR_PHY_RADAR_2_RELPWR, pe->pe_relpwr);
1236 
1237 		if (pe->pe_relstep != HAL_PHYERR_PARAM_NOVAL)
1238 			OS_REG_RMW_FIELD(ah, AR_PHY_RADAR_2,
1239 			    AR_PHY_RADAR_2_RELSTEP, pe->pe_relstep);
1240 
1241 		if (pe->pe_maxlen != HAL_PHYERR_PARAM_NOVAL)
1242 			OS_REG_RMW_FIELD(ah, AR_PHY_RADAR_2,
1243 			    AR_PHY_RADAR_2_MAXLEN, pe->pe_maxlen);
1244 	}
1245 
1246 	OS_REG_WRITE(ah, AR_PHY_RADAR_0, val);
1247 }
1248 
1249 /*
1250  * Parameters for the AR5212 PHY.
1251  */
1252 #define	AR5212_DFS_FIRPWR	-35
1253 #define	AR5212_DFS_RRSSI	20
1254 #define	AR5212_DFS_HEIGHT	14
1255 #define	AR5212_DFS_PRSSI	6
1256 #define	AR5212_DFS_INBAND	4
1257 
1258 /*
1259  * Default parameters for the AR5413 PHY.
1260  */
1261 #define	AR5413_DFS_FIRPWR	-34
1262 #define	AR5413_DFS_RRSSI	20
1263 #define	AR5413_DFS_HEIGHT	10
1264 #define	AR5413_DFS_PRSSI	15
1265 #define	AR5413_DFS_INBAND	6
1266 #define	AR5413_DFS_RELPWR	8
1267 #define	AR5413_DFS_RELSTEP	31
1268 #define	AR5413_DFS_MAXLEN	255
1269 
1270 HAL_BOOL
1271 ar5212GetDfsDefaultThresh(struct ath_hal *ah, HAL_PHYERR_PARAM *pe)
1272 {
1273 
1274 	if (IS_5413(ah)) {
1275 		pe->pe_firpwr = AR5413_DFS_FIRPWR;
1276 		pe->pe_rrssi = AR5413_DFS_RRSSI;
1277 		pe->pe_height = AR5413_DFS_HEIGHT;
1278 		pe->pe_prssi = AR5413_DFS_PRSSI;
1279 		pe->pe_inband = AR5413_DFS_INBAND;
1280 		pe->pe_relpwr = AR5413_DFS_RELPWR;
1281 		pe->pe_relstep = AR5413_DFS_RELSTEP;
1282 		pe->pe_maxlen = AR5413_DFS_MAXLEN;
1283 		pe->pe_usefir128 = 0;
1284 		pe->pe_blockradar = 1;
1285 		pe->pe_enmaxrssi = 1;
1286 		pe->pe_enrelpwr = 1;
1287 		pe->pe_en_relstep_check = 0;
1288 	} else {
1289 		pe->pe_firpwr = AR5212_DFS_FIRPWR;
1290 		pe->pe_rrssi = AR5212_DFS_RRSSI;
1291 		pe->pe_height = AR5212_DFS_HEIGHT;
1292 		pe->pe_prssi = AR5212_DFS_PRSSI;
1293 		pe->pe_inband = AR5212_DFS_INBAND;
1294 		pe->pe_relpwr = 0;
1295 		pe->pe_relstep = 0;
1296 		pe->pe_maxlen = 0;
1297 		pe->pe_usefir128 = 0;
1298 		pe->pe_blockradar = 0;
1299 		pe->pe_enmaxrssi = 0;
1300 		pe->pe_enrelpwr = 0;
1301 		pe->pe_en_relstep_check = 0;
1302 	}
1303 
1304 	return (AH_TRUE);
1305 }
1306 
1307 void
1308 ar5212GetDfsThresh(struct ath_hal *ah, HAL_PHYERR_PARAM *pe)
1309 {
1310 	uint32_t val,temp;
1311 
1312 	val = OS_REG_READ(ah, AR_PHY_RADAR_0);
1313 
1314 	temp = MS(val,AR_PHY_RADAR_0_FIRPWR);
1315 	temp |= 0xFFFFFF80;
1316 	pe->pe_firpwr = temp;
1317 	pe->pe_rrssi = MS(val, AR_PHY_RADAR_0_RRSSI);
1318 	pe->pe_height =  MS(val, AR_PHY_RADAR_0_HEIGHT);
1319 	pe->pe_prssi = MS(val, AR_PHY_RADAR_0_PRSSI);
1320 	pe->pe_inband = MS(val, AR_PHY_RADAR_0_INBAND);
1321 	pe->pe_enabled = !! (val & AR_PHY_RADAR_0_ENA);
1322 
1323 	pe->pe_relpwr = 0;
1324 	pe->pe_relstep = 0;
1325 	pe->pe_maxlen = 0;
1326 	pe->pe_usefir128 = 0;
1327 	pe->pe_blockradar = 0;
1328 	pe->pe_enmaxrssi = 0;
1329 	pe->pe_enrelpwr = 0;
1330 	pe->pe_en_relstep_check = 0;
1331 	pe->pe_extchannel = AH_FALSE;
1332 
1333 	if (IS_5413(ah)) {
1334 		val = OS_REG_READ(ah, AR_PHY_RADAR_2);
1335 		pe->pe_relpwr = !! MS(val, AR_PHY_RADAR_2_RELPWR);
1336 		pe->pe_relstep = !! MS(val, AR_PHY_RADAR_2_RELSTEP);
1337 		pe->pe_maxlen = !! MS(val, AR_PHY_RADAR_2_MAXLEN);
1338 
1339 		pe->pe_usefir128 = !! (val & AR_PHY_RADAR_2_USEFIR128);
1340 		pe->pe_blockradar = !! (val & AR_PHY_RADAR_2_BLOCKOFDMWEAK);
1341 		pe->pe_enmaxrssi = !! (val & AR_PHY_RADAR_2_ENMAXRSSI);
1342 		pe->pe_enrelpwr = !! (val & AR_PHY_RADAR_2_ENRELPWRCHK);
1343 		pe->pe_en_relstep_check =
1344 		    !! (val & AR_PHY_RADAR_2_ENRELSTEPCHK);
1345 	}
1346 }
1347 
1348 /*
1349  * Process the radar phy error and extract the pulse duration.
1350  */
1351 HAL_BOOL
1352 ar5212ProcessRadarEvent(struct ath_hal *ah, struct ath_rx_status *rxs,
1353     uint64_t fulltsf, const char *buf, HAL_DFS_EVENT *event)
1354 {
1355 	uint8_t dur;
1356 	uint8_t rssi;
1357 
1358 	/* Check whether the given phy error is a radar event */
1359 	if ((rxs->rs_phyerr != HAL_PHYERR_RADAR) &&
1360 	    (rxs->rs_phyerr != HAL_PHYERR_FALSE_RADAR_EXT))
1361 		return AH_FALSE;
1362 
1363 	/*
1364 	 * The first byte is the pulse width - if there's
1365 	 * no data, simply set the duration to 0
1366 	 */
1367 	if (rxs->rs_datalen >= 1)
1368 		/* The pulse width is byte 0 of the data */
1369 		dur = ((uint8_t) buf[0]) & 0xff;
1370 	else
1371 		dur = 0;
1372 
1373 	/* Pulse RSSI is the normal reported RSSI */
1374 	rssi = (uint8_t) rxs->rs_rssi;
1375 
1376 	/* 0 duration/rssi is not a valid radar event */
1377 	if (dur == 0 && rssi == 0)
1378 		return AH_FALSE;
1379 
1380 	HALDEBUG(ah, HAL_DEBUG_DFS, "%s: rssi=%d, dur=%d\n",
1381 	    __func__, rssi, dur);
1382 
1383 	/* Record the event */
1384 	event->re_full_ts = fulltsf;
1385 	event->re_ts = rxs->rs_tstamp;
1386 	event->re_rssi = rssi;
1387 	event->re_dur = dur;
1388 	event->re_flags = HAL_DFS_EVENT_PRICH;
1389 
1390 	return AH_TRUE;
1391 }
1392 
1393 /*
1394  * Return whether 5GHz fast-clock (44MHz) is enabled.
1395  * It's always disabled for AR5212 series NICs.
1396  */
1397 HAL_BOOL
1398 ar5212IsFastClockEnabled(struct ath_hal *ah)
1399 {
1400 	return AH_FALSE;
1401 }
1402 
1403 /*
1404  * Return what percentage of the extension channel is busy.
1405  * This is always disabled for AR5212 series NICs.
1406  */
1407 uint32_t
1408 ar5212Get11nExtBusy(struct ath_hal *ah)
1409 {
1410 	return 0;
1411 }
1412 
1413 /*
1414  * Channel survey support.
1415  */
1416 HAL_BOOL
1417 ar5212GetMibCycleCounts(struct ath_hal *ah, HAL_SURVEY_SAMPLE *hsample)
1418 {
1419 	struct ath_hal_5212 *ahp = AH5212(ah);
1420 	u_int32_t good = AH_TRUE;
1421 
1422 	/* XXX freeze/unfreeze mib counters */
1423 	uint32_t rc = OS_REG_READ(ah, AR_RCCNT);
1424 	uint32_t rf = OS_REG_READ(ah, AR_RFCNT);
1425 	uint32_t tf = OS_REG_READ(ah, AR_TFCNT);
1426 	uint32_t cc = OS_REG_READ(ah, AR_CCCNT); /* read cycles last */
1427 
1428 	if (ahp->ah_cycleCount == 0 || ahp->ah_cycleCount > cc) {
1429 		/*
1430 		 * Cycle counter wrap (or initial call); it's not possible
1431 		 * to accurately calculate a value because the registers
1432 		 * right shift rather than wrap--so punt and return 0.
1433 		 */
1434 		HALDEBUG(ah, HAL_DEBUG_ANY,
1435 		    "%s: cycle counter wrap. ExtBusy = 0\n", __func__);
1436 		good = AH_FALSE;
1437 	} else {
1438 		hsample->cycle_count = cc - ahp->ah_cycleCount;
1439 		hsample->chan_busy = rc - ahp->ah_ctlBusy;
1440 		hsample->ext_chan_busy = 0;
1441 		hsample->rx_busy = rf - ahp->ah_rxBusy;
1442 		hsample->tx_busy = tf - ahp->ah_txBusy;
1443 	}
1444 
1445 	/*
1446 	 * Keep a copy of the MIB results so the next sample has something
1447 	 * to work from.
1448 	 */
1449 	ahp->ah_cycleCount = cc;
1450 	ahp->ah_rxBusy = rf;
1451 	ahp->ah_ctlBusy = rc;
1452 	ahp->ah_txBusy = tf;
1453 
1454 	return (good);
1455 }
1456 
1457 void
1458 ar5212SetChainMasks(struct ath_hal *ah, uint32_t tx_chainmask,
1459     uint32_t rx_chainmask)
1460 {
1461 }
1462