1 /*- 2 * Copyright (c) 2015-2016 Landon Fuller <landon@landonf.org> 3 * Copyright (c) 2010 Broadcom Corporation 4 * All rights reserved. 5 * 6 * This file is derived from the sbchipc.h header distributed with 7 * Broadcom's initial brcm80211 Linux driver release, as 8 * contributed to the Linux staging repository. 9 * 10 * Permission to use, copy, modify, and/or distribute this software for any 11 * purpose with or without fee is hereby granted, provided that the above 12 * copyright notice and this permission notice appear in all copies. 13 * 14 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 15 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 16 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY 17 * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 18 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION 19 * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN 20 * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 21 * 22 * $FreeBSD$ 23 */ 24 25 #ifndef _BHND_CORES_CHIPC_CHIPCREG_H_ 26 #define _BHND_CORES_CHIPC_CHIPCREG_H_ 27 28 /** Evaluates to true if the given ChipCommon core revision supports 29 * the CHIPC_CORECTRL register */ 30 #define CHIPC_HWREV_HAS_CORECTRL(hwrev) ((hwrev) >= 1) 31 32 /** Evaluates to true if the given ChipCommon core revision provides 33 * the core count via the chip identification register. */ 34 #define CHIPC_NCORES_MIN_HWREV(hwrev) ((hwrev) == 4 || (hwrev) >= 6) 35 36 /** Evaluates to true if the given ChipCommon core revision supports 37 * the CHIPC_CAPABILITIES_EXT register */ 38 #define CHIPC_HWREV_HAS_CAP_EXT(hwrev) ((hwrev) >= 35) 39 40 /** Evaluates to true if the chipcommon core (determined from the provided 41 * @p _chipid (CHIPC_ID) register value) provides a pointer to the enumeration 42 * table via CHIPC_EROMPTR */ 43 #define CHIPC_HAS_EROMPTR(_chipid) \ 44 (CHIPC_GET_BITS((_chipid), CHIPC_ID_BUS) != BHND_CHIPTYPE_SIBA) 45 46 #define CHIPC_GET_FLAG(_value, _flag) (((_value) & _flag) != 0) 47 #define CHIPC_GET_BITS(_value, _field) \ 48 ((_value & _field ## _MASK) >> _field ## _SHIFT) 49 50 51 #define CHIPC_ID 0x00 52 #define CHIPC_CAPABILITIES 0x04 53 #define CHIPC_CORECTRL 0x08 /* rev >= 1 */ 54 #define CHIPC_BIST 0x0C 55 56 #define CHIPC_OTPST 0x10 /**< otp status */ 57 #define CHIPC_OTPCTRL 0x14 /**< otp control */ 58 #define CHIPC_OTPPROG 0x18 59 #define CHIPC_OTPLAYOUT 0x1C /**< otp layout (IPX OTP) */ 60 61 #define CHIPC_INTST 0x20 /**< interrupt status */ 62 #define CHIPC_INTM 0x24 /**< interrupt mask */ 63 64 #define CHIPC_CHIPCTRL 0x28 /**< chip control (rev >= 11) */ 65 #define CHIPC_CHIPST 0x2C /**< chip status (rev >= 11) */ 66 67 #define CHIPC_JTAGCMD 0x30 68 #define CHIPC_JTAGIR 0x34 69 #define CHIPC_JTAGDR 0x38 70 #define CHIPC_JTAGCTRL 0x3c 71 72 #define CHIPC_SFLASH_BASE 0x40 73 #define CHIPC_SFLASH_SIZE 12 74 #define CHIPC_SFLASHCTRL 0x40 75 #define CHIPC_SFLASHADDR 0x44 76 #define CHIPC_SFLASHDATA 0x48 77 78 /* siba backplane configuration broadcast (siba-only) */ 79 #define CHIPC_SBBCAST_ADDR 0x50 80 #define CHIPC_SBBCAST_DATA 0x54 81 82 #define CHIPC_GPIOPU 0x58 /**< pull-up mask (rev >= 20) */ 83 #define CHIPC_GPIOPD 0x5C /**< pull down mask (rev >= 20) */ 84 #define CHIPC_GPIOIN 0x60 85 #define CHIPC_GPIOOUT 0x64 86 #define CHIPC_GPIOOUTEN 0x68 87 #define CHIPC_GPIOCTRL 0x6C 88 #define CHIPC_GPIOPOL 0x70 89 #define CHIPC_GPIOINTM 0x74 /**< gpio interrupt mask */ 90 91 #define CHIPC_GPIOEVENT 0x78 /**< gpio event (rev >= 11) */ 92 #define CHIPC_GPIOEVENT_INTM 0x7C /**< gpio event interrupt mask (rev >= 11) */ 93 94 #define CHIPC_WATCHDOG 0x80 /**< watchdog timer */ 95 96 #define CHIPC_GPIOEVENT_INTPOLARITY 0x84 /**< gpio even interrupt polarity (rev >= 11) */ 97 98 #define CHIPC_GPIOTIMERVAL 0x88 /**< gpio-based LED duty cycle (rev >= 16) */ 99 #define CHIPC_GPIOTIMEROUTMASK 0x8C 100 101 /* clock control registers (non-PMU devices) */ 102 #define CHIPC_CLKC_N 0x90 103 #define CHIPC_CLKC_SB 0x94 /* m0 (backplane) */ 104 #define CHIPC_CLKC_PCI 0x98 /* m1 */ 105 #define CHIPC_CLKC_M2 0x9C /* mii/uart/mipsref */ 106 #define CHIPC_CLKC_M3 0xA0 /* cpu */ 107 #define CHIPC_CLKDIV 0xA4 /* rev >= 3 */ 108 109 #define CHIPC_GPIODEBUGSEL 0xA8 /* rev >= 28 */ 110 #define CHIPC_CAPABILITIES_EXT 0xAC 111 112 /* pll/slowclk clock control registers (rev >= 4) */ 113 #define CHIPC_PLL_ON_DELAY 0xB0 /* rev >= 4 */ 114 #define CHIPC_PLL_FREFSEL_DELAY 0xB4 /* rev >= 4 */ 115 #define CHIPC_PLL_SLOWCLK_CTL 0xB8 /* "slowclock" (rev 6-9) */ 116 117 /* "instaclock" clock control registers */ 118 #define CHIPC_SYS_CLK_CTL 0xC0 /* "instaclock" (rev >= 10) */ 119 #define CHIPC_SYS_CLK_ST_STRETCH 0xC4 /* state strech (?) rev >= 10 */ 120 121 /* indirect backplane access (rev >= 10) */ 122 #define CHIPC_BP_ADDRLOW 0xD0 123 #define CHIPC_BP_ADDRHIGH 0xD4 124 #define CHIPC_BP_DATA 0xD8 125 #define CHIPC_BP_INDACCESS 0xE0 126 127 /* SPI/I2C (rev >= 37) */ 128 #define CHIPC_GSIO_CTRL 0xE4 129 #define CHIPC_GSIO_ADDR 0xE8 130 #define CHIPC_GSIO_DATA 0xEC 131 132 /* More clock dividers (corerev >= 32) */ 133 #define CHIPC_CLKDIV2 0xF0 134 135 #define CHIPC_EROMPTR 0xFC /**< 32-bit EROM base address 136 * on BCMA devices */ 137 138 /* ExtBus control registers (rev >= 3) */ 139 #define CHIPC_PCMCIA_CFG 0x100 140 #define CHIPC_PCMCIA_MEMWAIT 0x104 141 #define CHIPC_PCMCIA_ATTRWAIT 0x108 142 #define CHIPC_PCMCIA_IOWAIT 0x10C 143 #define CHIPC_IDE_CFG 0x110 144 #define CHIPC_IDE_MEMWAIT 0x114 145 #define CHIPC_IDE_ATTRWAIT 0x118 146 #define CHIPC_IDE_IOWAIT 0x11C 147 #define CHIPC_PROG_CFG 0x120 148 #define CHIPC_PROG_WAITCOUNT 0x124 149 #define CHIPC_FLASH_CFG 0x128 150 #define CHIPC_FLASH_WAITCOUNT 0x12C 151 #define CHIPC_SECI_CFG 0x130 152 #define CHIPC_SECI_ST 0x134 153 #define CHIPC_SECI_STM 0x138 154 #define CHIPC_SECI_RXNBC 0x13C 155 156 /* Enhanced Coexistence Interface (ECI) registers (rev 21-34) */ 157 #define CHIPC_ECI_OUTPUT 0x140 158 #define CHIPC_ECI_CTRL 0x144 159 #define CHIPC_ECI_INPUTLO 0x148 160 #define CHIPC_ECI_INPUTMI 0x14C 161 #define CHIPC_ECI_INPUTHI 0x150 162 #define CHIPC_ECI_INPUTINTPOLARITYLO 0x154 163 #define CHIPC_ECI_INPUTINTPOLARITYMI 0x158 164 #define CHIPC_ECI_INPUTINTPOLARITYHI 0x15C 165 #define CHIPC_ECI_INTMASKLO 0x160 166 #define CHIPC_ECI_INTMASKMI 0x164 167 #define CHIPC_ECI_INTMASKHI 0x168 168 #define CHIPC_ECI_EVENTLO 0x16C 169 #define CHIPC_ECI_EVENTMI 0x170 170 #define CHIPC_ECI_EVENTHI 0x174 171 #define CHIPC_ECI_EVENTMASKLO 0x178 172 #define CHIPC_ECI_EVENTMASKMI 0x17C 173 #define CHIPC_ECI_EVENTMASKHI 0x180 174 175 #define CHIPC_FLASHSTRCFG 0x18C /**< BCM4706 NAND flash config */ 176 177 #define CHIPC_SPROM_CTRL 0x190 /**< SPROM interface (rev >= 32) */ 178 #define CHIPC_SPROM_ADDR 0x194 179 #define CHIPC_SPROM_DATA 0x198 180 181 /* Clock control and hardware workarounds (corerev >= 20) */ 182 #define CHIPC_CLK_CTL_ST 0x1E0 183 #define CHIPC_SPROM_HWWAR 0x19 184 185 #define CHIPC_UART_BASE 0x300 186 #define CHIPC_UART_SIZE 0x100 187 #define CHIPC_UART_MAX 3 /**< max UART blocks */ 188 #define CHIPC_UART(_n) (CHIPC_UART_BASE + (CHIPC_UART_SIZE*_n)) 189 190 /* PMU register block (rev >= 20) */ 191 #define CHIPC_PMU_BASE 0x600 192 #define CHIPC_PMU_SIZE 0x70 193 194 #define CHIPC_SPROM_OTP 0x800 /* SPROM/OTP address space */ 195 #define CHIPC_SPROM_OTP_SIZE 0x400 196 197 /** chipid */ 198 #define CHIPC_ID_CHIP_MASK 0x0000FFFF /**< chip id */ 199 #define CHIPC_ID_CHIP_SHIFT 0 200 #define CHIPC_ID_REV_MASK 0x000F0000 /**< chip revision */ 201 #define CHIPC_ID_REV_SHIFT 16 202 #define CHIPC_ID_PKG_MASK 0x00F00000 /**< physical package ID */ 203 #define CHIPC_ID_PKG_SHIFT 20 204 #define CHIPC_ID_NUMCORE_MASK 0x0F000000 /**< number of cores on chip (rev >= 4) */ 205 #define CHIPC_ID_NUMCORE_SHIFT 24 206 #define CHIPC_ID_BUS_MASK 0xF0000000 /**< chip/interconnect type (BHND_CHIPTYPE_*) */ 207 #define CHIPC_ID_BUS_SHIFT 28 208 209 /* capabilities */ 210 #define CHIPC_CAP_NUM_UART_MASK 0x00000003 /* Number of UARTs (1-3) */ 211 #define CHIPC_CAP_NUM_UART_SHIFT 0 212 #define CHIPC_CAP_MIPSEB 0x00000004 /* MIPS is in big-endian mode */ 213 #define CHIPC_CAP_UCLKSEL_MASK 0x00000018 /* UARTs clock select */ 214 #define CHIPC_CAP_UCLKSEL_SHIFT 3 215 #define CHIPC_CAP_UCLKSEL_UINTCLK 0x1 /* UARTs are driven by internal divided clock */ 216 #define CHIPC_CAP_UARTGPIO 0x00000020 /* UARTs own GPIOs 15:12 */ 217 #define CHIPC_CAP_EXTBUS_MASK 0x000000c0 /* External bus mask */ 218 #define CHIPC_CAP_EXTBUS_SHIFT 6 219 #define CHIPC_CAP_EXTBUS_NONE 0x0 /* No ExtBus present */ 220 #define CHIPC_CAP_EXTBUS_FULL 0x1 /* ExtBus: PCMCIA, IDE & Prog */ 221 #define CHIPC_CAP_EXTBUS_PROG 0x2 /* ExtBus: ProgIf only */ 222 #define CHIPC_CAP_FLASH_MASK 0x00000700 /* Type of flash */ 223 #define CHIPC_CAP_FLASH_SHIFT 8 224 #define CHIPC_CAP_FLASH_NONE 0x0 /* No flash */ 225 #define CHIPC_CAP_SFLASH_ST 0x1 /* ST serial flash */ 226 #define CHIPC_CAP_SFLASH_AT 0x2 /* Atmel serial flash */ 227 #define CHIPC_CAP_NFLASH 0x3 /* NAND flash */ 228 #define CHIPC_CAP_PFLASH 0x7 /* Parallel flash */ 229 #define CHIPC_CAP_PLL_MASK 0x00038000 /* Type of PLL */ 230 #define CHIPC_CAP_PLL_SHIFT 15 231 #define CHIPC_CAP_PWR_CTL 0x00040000 /* Power/clock control */ 232 #define CHIPC_CAP_OTP_SIZE_MASK 0x00380000 /* OTP Size (0 = none) */ 233 #define CHIPC_CAP_OTP_SIZE_SHIFT 19 /* OTP Size shift */ 234 #define CHIPC_CAP_OTP_SIZE_BASE 5 /* OTP Size base */ 235 #define CHIPC_CAP_JTAGP 0x00400000 /* JTAG Master Present */ 236 #define CHIPC_CAP_ROM 0x00800000 /* Internal boot rom active */ 237 #define CHIPC_CAP_BKPLN64 0x08000000 /* 64-bit backplane */ 238 #define CHIPC_CAP_PMU 0x10000000 /* PMU Present, rev >= 20 */ 239 #define CHIPC_CAP_ECI 0x20000000 /* Enhanced Coexistence Interface */ 240 #define CHIPC_CAP_SPROM 0x40000000 /* SPROM Present, rev >= 32 */ 241 #define CHIPC_CAP_4706_NFLASH 0x80000000 /* NAND flash present, BCM4706 or chipc rev38 (BCM5357)? */ 242 243 #define CHIPC_CAP2_SECI 0x00000001 /* SECI Present, rev >= 36 */ 244 #define CHIPC_CAP2_GSIO 0x00000002 /* GSIO (spi/i2c) present, rev >= 37 */ 245 #define CHIPC_CAP2_GCI 0x00000004 /* GCI present (rev >= ??) */ 246 #define CHIPC_CAP2_AOB 0x00000040 /* Always on Bus present (rev >= 49) 247 * 248 * If set, PMU and GCI registers 249 * are found in dedicated cores. 250 * 251 * This appears to be a lower power 252 * APB bus, bridged via ARM APB IP. */ 253 254 /* 255 * ChipStatus (Common) 256 */ 257 258 /** ChipStatus CIS/OTP/SPROM values used to advertise OTP/SPROM availability in 259 * chipcommon revs 11-31. */ 260 enum { 261 CHIPC_CST_DEFCIS_SEL = 0, /**< OTP is powered up, use default CIS, no SPROM */ 262 CHIPC_CST_SPROM_SEL = 1, /**< OTP is powered up, SPROM is present */ 263 CHIPC_CST_OTP_SEL = 2, /**< OTP is powered up, no SPROM */ 264 CHIPC_CST_OTP_PWRDN = 3 /**< OTP is powered down, SPROM is present (rev <= 22 only) */ 265 }; 266 267 268 #define CHIPC_CST_SPROM_OTP_SEL_R22_MASK 0x00000003 /**< chipstatus OTP/SPROM SEL value (rev 22) */ 269 #define CHIPC_CST_SPROM_OTP_SEL_R22_SHIFT 0 270 #define CHIPC_CST_SPROM_OTP_SEL_R23_MASK 0x000000c0 /**< chipstatus OTP/SPROM SEL value (revs 23-31) 271 * 272 * it is unknown whether this is supported on 273 * any CC revs >= 32 that also vend CHIPC_CAP_* 274 * constants for OTP/SPROM/NVRAM availability. 275 */ 276 #define CHIPC_CST_SPROM_OTP_SEL_R23_SHIFT 6 277 278 /* PLL type */ 279 #define CHIPC_PLL_NONE 0x0 280 #define CHIPC_PLL_TYPE1 0x2 /* 48MHz base, 3 dividers */ 281 #define CHIPC_PLL_TYPE2 0x4 /* 48MHz, 4 dividers */ 282 #define CHIPC_PLL_TYPE3 0x6 /* 25MHz, 2 dividers */ 283 #define CHIPC_PLL_TYPE4 0x8 /* 48MHz, 4 dividers */ 284 #define CHIPC_PLL_TYPE5 0x3 /* 25MHz, 4 dividers */ 285 #define CHIPC_PLL_TYPE6 0x5 /* 100/200 or 120/240 only */ 286 #define CHIPC_PLL_TYPE7 0x7 /* 25MHz, 4 dividers */ 287 288 /* dynamic clock control defines */ 289 #define CHIPC_LPOMINFREQ 25000 /* low power oscillator min */ 290 #define CHIPC_LPOMAXFREQ 43000 /* low power oscillator max */ 291 #define CHIPC_XTALMINFREQ 19800000 /* 20 MHz - 1% */ 292 #define CHIPC_XTALMAXFREQ 20200000 /* 20 MHz + 1% */ 293 #define CHIPC_PCIMINFREQ 25000000 /* 25 MHz */ 294 #define CHIPC_PCIMAXFREQ 34000000 /* 33 MHz + fudge */ 295 296 #define CHIPC_ILP_DIV_5MHZ 0 /* ILP = 5 MHz */ 297 #define CHIPC_ILP_DIV_1MHZ 4 /* ILP = 1 MHz */ 298 299 /* Power Control Defines */ 300 #define CHIPC_PLL_DELAY 150 /* us pll on delay */ 301 #define CHIPC_FREF_DELAY 200 /* us fref change delay */ 302 #define CHIPC_MIN_SLOW_CLK 32 /* us Slow clock period */ 303 #define CHIPC_XTAL_ON_DELAY 1000 /* us crystal power-on delay */ 304 305 /* corecontrol */ 306 #define CHIPC_UARTCLKO 0x00000001 /* Drive UART with internal clock */ 307 #define CHIPC_SE 0x00000002 /* sync clk out enable (corerev >= 3) */ 308 #define CHIPC_UARTCLKEN 0x00000008 /* enable UART Clock (corerev > = 21 */ 309 310 /* chipcontrol */ 311 #define CHIPCTRL_4321A0_DEFAULT 0x3a4 312 #define CHIPCTRL_4321A1_DEFAULT 0x0a4 313 #define CHIPCTRL_4321_PLL_DOWN 0x800000 /* serdes PLL down override */ 314 315 /* Fields in the otpstatus register in rev >= 21 */ 316 #define CHIPC_OTPS_OL_MASK 0x000000ff 317 #define CHIPC_OTPS_OL_MFG 0x00000001 /* manuf row is locked */ 318 #define CHIPC_OTPS_OL_OR1 0x00000002 /* otp redundancy row 1 is locked */ 319 #define CHIPC_OTPS_OL_OR2 0x00000004 /* otp redundancy row 2 is locked */ 320 #define CHIPC_OTPS_OL_GU 0x00000008 /* general use region is locked */ 321 #define CHIPC_OTPS_GUP_MASK 0x00000f00 322 #define CHIPC_OTPS_GUP_SHIFT 8 323 #define CHIPC_OTPS_GUP_HW 0x00000100 /* h/w subregion is programmed */ 324 #define CHIPC_OTPS_GUP_SW 0x00000200 /* s/w subregion is programmed */ 325 #define CHIPC_OTPS_GUP_CI 0x00000400 /* chipid/pkgopt subregion is programmed */ 326 #define CHIPC_OTPS_GUP_FUSE 0x00000800 /* fuse subregion is programmed */ 327 #define CHIPC_OTPS_READY 0x00001000 328 #define CHIPC_OTPS_RV(x) (1 << (16 + (x))) /* redundancy entry valid */ 329 #define CHIPC_OTPS_RV_MASK 0x0fff0000 330 331 /* IPX OTP fields in the otpcontrol register */ 332 #define CHIPC_OTPC_PROGSEL 0x00000001 333 #define CHIPC_OTPC_PCOUNT_MASK 0x0000000e 334 #define CHIPC_OTPC_PCOUNT_SHIFT 1 335 #define CHIPC_OTPC_VSEL_MASK 0x000000f0 336 #define CHIPC_OTPC_VSEL_SHIFT 4 337 #define CHIPC_OTPC_TMM_MASK 0x00000700 338 #define CHIPC_OTPC_TMM_SHIFT 8 339 #define CHIPC_OTPC_ODM 0x00000800 340 #define CHIPC_OTPC_PROGEN 0x80000000 341 342 /* Fields in otpprog in IPX OTP and HND OTP */ 343 #define CHIPC_OTPP_COL_MASK 0x000000ff 344 #define CHIPC_OTPP_COL_SHIFT 0 345 #define CHIPC_OTPP_ROW_MASK 0x0000ff00 346 #define CHIPC_OTPP_ROW_SHIFT 8 347 #define CHIPC_OTPP_OC_MASK 0x0f000000 348 #define CHIPC_OTPP_OC_SHIFT 24 349 #define CHIPC_OTPP_READERR 0x10000000 350 #define CHIPC_OTPP_VALUE_MASK 0x20000000 351 #define CHIPC_OTPP_VALUE_SHIFT 29 352 #define CHIPC_OTPP_START_BUSY 0x80000000 353 #define CHIPC_OTPP_READ 0x40000000 /* HND OTP */ 354 355 /* otplayout */ 356 #define CHIPC_OTPL_SIZE_MASK 0x0000f000 /* rev >= 49 */ 357 #define CHIPC_OTPL_SIZE_SHIFT 12 358 #define CHIPC_OTPL_GUP_MASK 0x00000FFF /* bit offset to general use region */ 359 #define CHIPC_OTPL_GUP_SHIFT 0 360 #define CHIPC_OTPL_CISFORMAT_NEW 0x80000000 /* rev >= 36 */ 361 362 /* Opcodes for OTPP_OC field */ 363 #define CHIPC_OTPPOC_READ 0 364 #define CHIPC_OTPPOC_BIT_PROG 1 365 #define CHIPC_OTPPOC_VERIFY 3 366 #define CHIPC_OTPPOC_INIT 4 367 #define CHIPC_OTPPOC_SET 5 368 #define CHIPC_OTPPOC_RESET 6 369 #define CHIPC_OTPPOC_OCST 7 370 #define CHIPC_OTPPOC_ROW_LOCK 8 371 #define CHIPC_OTPPOC_PRESCN_TEST 9 372 373 /* Jtagm characteristics that appeared at a given corerev */ 374 #define CHIPC_JTAGM_CREV_OLD 10 /* Old command set, 16bit max IR */ 375 #define CHIPC_JTAGM_CREV_IRP 22 /* Able to do pause-ir */ 376 #define CHIPC_JTAGM_CREV_RTI 28 /* Able to do return-to-idle */ 377 378 /* jtagcmd */ 379 #define CHIPC_JCMD_START 0x80000000 380 #define CHIPC_JCMD_BUSY 0x80000000 381 #define CHIPC_JCMD_STATE_MASK 0x60000000 382 #define CHIPC_JCMD_STATE_TLR 0x00000000 /* Test-logic-reset */ 383 #define CHIPC_JCMD_STATE_PIR 0x20000000 /* Pause IR */ 384 #define CHIPC_JCMD_STATE_PDR 0x40000000 /* Pause DR */ 385 #define CHIPC_JCMD_STATE_RTI 0x60000000 /* Run-test-idle */ 386 #define CHIPC_JCMD0_ACC_MASK 0x0000f000 387 #define CHIPC_JCMD0_ACC_IRDR 0x00000000 388 #define CHIPC_JCMD0_ACC_DR 0x00001000 389 #define CHIPC_JCMD0_ACC_IR 0x00002000 390 #define CHIPC_JCMD0_ACC_RESET 0x00003000 391 #define CHIPC_JCMD0_ACC_IRPDR 0x00004000 392 #define CHIPC_JCMD0_ACC_PDR 0x00005000 393 #define CHIPC_JCMD0_IRW_MASK 0x00000f00 394 #define CHIPC_JCMD_ACC_MASK 0x000f0000 /* Changes for corerev 11 */ 395 #define CHIPC_JCMD_ACC_IRDR 0x00000000 396 #define CHIPC_JCMD_ACC_DR 0x00010000 397 #define CHIPC_JCMD_ACC_IR 0x00020000 398 #define CHIPC_JCMD_ACC_RESET 0x00030000 399 #define CHIPC_JCMD_ACC_IRPDR 0x00040000 400 #define CHIPC_JCMD_ACC_PDR 0x00050000 401 #define CHIPC_JCMD_ACC_PIR 0x00060000 402 #define CHIPC_JCMD_ACC_IRDR_I 0x00070000 /* rev 28: return to run-test-idle */ 403 #define CHIPC_JCMD_ACC_DR_I 0x00080000 /* rev 28: return to run-test-idle */ 404 #define CHIPC_JCMD_IRW_MASK 0x00001f00 405 #define CHIPC_JCMD_IRW_SHIFT 8 406 #define CHIPC_JCMD_DRW_MASK 0x0000003f 407 408 /* jtagctrl */ 409 #define CHIPC_JCTRL_FORCE_CLK 4 /* Force clock */ 410 #define CHIPC_JCTRL_EXT_EN 2 /* Enable external targets */ 411 #define CHIPC_JCTRL_EN 1 /* Enable Jtag master */ 412 413 /* Fields in clkdiv */ 414 #define CHIPC_CLKD_SFLASH 0x0f000000 415 #define CHIPC_CLKD_SFLASH_SHIFT 24 416 #define CHIPC_CLKD_OTP 0x000f0000 417 #define CHIPC_CLKD_OTP_SHIFT 16 418 #define CHIPC_CLKD_JTAG 0x00000f00 419 #define CHIPC_CLKD_JTAG_SHIFT 8 420 #define CHIPC_CLKD_UART 0x000000ff 421 422 #define CHIPC_CLKD2_SPROM 0x00000003 423 424 /* intstatus/intmask */ 425 #define CHIPC_CI_GPIO 0x00000001 /* gpio intr */ 426 #define CHIPC_CI_EI 0x00000002 /* extif intr (corerev >= 3) */ 427 #define CHIPC_CI_TEMP 0x00000004 /* temp. ctrl intr (corerev >= 15) */ 428 #define CHIPC_CI_SIRQ 0x00000008 /* serial IRQ intr (corerev >= 15) */ 429 #define CHIPC_CI_PMU 0x00000020 /* pmu intr (corerev >= 21) */ 430 #define CHIPC_CI_UART 0x00000040 /* uart intr (corerev >= 21) */ 431 #define CHIPC_CI_WDRESET 0x80000000 /* watchdog reset occurred */ 432 433 /* slow_clk_ctl */ 434 #define CHIPC_SCC_SS_MASK 0x00000007 /* slow clock source mask */ 435 #define CHIPC_SCC_SS_LPO 0x00000000 /* source of slow clock is LPO */ 436 #define CHIPC_SCC_SS_XTAL 0x00000001 /* source of slow clock is crystal */ 437 #define CHIPC_SCC_SS_PCI 0x00000002 /* source of slow clock is PCI */ 438 #define CHIPC_SCC_LF 0x00000200 /* LPOFreqSel, 1: 160Khz, 0: 32KHz */ 439 #define CHIPC_SCC_LP 0x00000400 /* LPOPowerDown, 1: LPO is disabled, 440 * 0: LPO is enabled 441 */ 442 #define CHIPC_SCC_FS 0x00000800 /* ForceSlowClk, 1: sb/cores running on slow clock, 443 * 0: power logic control 444 */ 445 #define CHIPC_SCC_IP 0x00001000 /* IgnorePllOffReq, 1/0: power logic ignores/honors 446 * PLL clock disable requests from core 447 */ 448 #define CHIPC_SCC_XC 0x00002000 /* XtalControlEn, 1/0: power logic does/doesn't 449 * disable crystal when appropriate 450 */ 451 #define CHIPC_SCC_XP 0x00004000 /* XtalPU (RO), 1/0: crystal running/disabled */ 452 #define CHIPC_SCC_CD_MASK 0xffff0000 /* ClockDivider (SlowClk = 1/(4+divisor)) */ 453 #define CHIPC_SCC_CD_SHIFT 16 454 455 /* system_clk_ctl */ 456 #define CHIPC_SYCC_IE 0x00000001 /* ILPen: Enable Idle Low Power */ 457 #define CHIPC_SYCC_AE 0x00000002 /* ALPen: Enable Active Low Power */ 458 #define CHIPC_SYCC_FP 0x00000004 /* ForcePLLOn */ 459 #define CHIPC_SYCC_AR 0x00000008 /* Force ALP (or HT if ALPen is not set */ 460 #define CHIPC_SYCC_HR 0x00000010 /* Force HT */ 461 #define CHIPC_SYCC_CD_MASK 0xffff0000 /* ClkDiv (ILP = 1/(4 * (divisor + 1)) */ 462 #define CHIPC_SYCC_CD_SHIFT 16 463 464 /* Indirect backplane access */ 465 #define CHIPC_BPIA_BYTEEN 0x0000000f 466 #define CHIPC_BPIA_SZ1 0x00000001 467 #define CHIPC_BPIA_SZ2 0x00000003 468 #define CHIPC_BPIA_SZ4 0x00000007 469 #define CHIPC_BPIA_SZ8 0x0000000f 470 #define CHIPC_BPIA_WRITE 0x00000100 471 #define CHIPC_BPIA_START 0x00000200 472 #define CHIPC_BPIA_BUSY 0x00000200 473 #define CHIPC_BPIA_ERROR 0x00000400 474 475 /* pcmcia/prog/flash_config */ 476 #define CHIPC_CF_EN 0x00000001 /* enable */ 477 #define CHIPC_CF_EM_MASK 0x0000000e /* mode */ 478 #define CHIPC_CF_EM_SHIFT 1 479 #define CHIPC_CF_EM_FLASH 0 /* flash/asynchronous mode */ 480 #define CHIPC_CF_EM_SYNC 2 /* synchronous mode */ 481 #define CHIPC_CF_EM_PCMCIA 4 /* pcmcia mode */ 482 #define CHIPC_CF_DS 0x00000010 /* destsize: 0=8bit, 1=16bit */ 483 #define CHIPC_CF_BS 0x00000020 /* byteswap */ 484 #define CHIPC_CF_CD_MASK 0x000000c0 /* clock divider */ 485 #define CHIPC_CF_CD_SHIFT 6 486 #define CHIPC_CF_CD_DIV2 0x00000000 /* backplane/2 */ 487 #define CHIPC_CF_CD_DIV3 0x00000040 /* backplane/3 */ 488 #define CHIPC_CF_CD_DIV4 0x00000080 /* backplane/4 */ 489 #define CHIPC_CF_CE 0x00000100 /* clock enable */ 490 #define CHIPC_CF_SB 0x00000200 /* size/bytestrobe (synch only) */ 491 492 /* pcmcia_memwait */ 493 #define CHIPC_PM_W0_MASK 0x0000003f /* waitcount0 */ 494 #define CHIPC_PM_W1_MASK 0x00001f00 /* waitcount1 */ 495 #define CHIPC_PM_W1_SHIFT 8 496 #define CHIPC_PM_W2_MASK 0x001f0000 /* waitcount2 */ 497 #define CHIPC_PM_W2_SHIFT 16 498 #define CHIPC_PM_W3_MASK 0x1f000000 /* waitcount3 */ 499 #define CHIPC_PM_W3_SHIFT 24 500 501 /* pcmcia_attrwait */ 502 #define CHIPC_PA_W0_MASK 0x0000003f /* waitcount0 */ 503 #define CHIPC_PA_W1_MASK 0x00001f00 /* waitcount1 */ 504 #define CHIPC_PA_W1_SHIFT 8 505 #define CHIPC_PA_W2_MASK 0x001f0000 /* waitcount2 */ 506 #define CHIPC_PA_W2_SHIFT 16 507 #define CHIPC_PA_W3_MASK 0x1f000000 /* waitcount3 */ 508 #define CHIPC_PA_W3_SHIFT 24 509 510 /* pcmcia_iowait */ 511 #define CHIPC_PI_W0_MASK 0x0000003f /* waitcount0 */ 512 #define CHIPC_PI_W1_MASK 0x00001f00 /* waitcount1 */ 513 #define CHIPC_PI_W1_SHIFT 8 514 #define CHIPC_PI_W2_MASK 0x001f0000 /* waitcount2 */ 515 #define CHIPC_PI_W2_SHIFT 16 516 #define CHIPC_PI_W3_MASK 0x1f000000 /* waitcount3 */ 517 #define CHIPC_PI_W3_SHIFT 24 518 519 /* prog_waitcount */ 520 #define CHIPC_PW_W0_MASK 0x0000001f /* waitcount0 */ 521 #define CHIPC_PW_W1_MASK 0x00001f00 /* waitcount1 */ 522 #define CHIPC_PW_W1_SHIFT 8 523 #define CHIPC_PW_W2_MASK 0x001f0000 /* waitcount2 */ 524 #define CHIPC_PW_W2_SHIFT 16 525 #define CHIPC_PW_W3_MASK 0x1f000000 /* waitcount3 */ 526 #define CHIPC_PW_W3_SHIFT 24 527 528 #define CHIPC_PW_W0 0x0000000c 529 #define CHIPC_PW_W1 0x00000a00 530 #define CHIPC_PW_W2 0x00020000 531 #define CHIPC_PW_W3 0x01000000 532 533 /* flash_waitcount */ 534 #define CHIPC_FW_W0_MASK 0x0000003f /* waitcount0 */ 535 #define CHIPC_FW_W1_MASK 0x00001f00 /* waitcount1 */ 536 #define CHIPC_FW_W1_SHIFT 8 537 #define CHIPC_FW_W2_MASK 0x001f0000 /* waitcount2 */ 538 #define CHIPC_FW_W2_SHIFT 16 539 #define CHIPC_FW_W3_MASK 0x1f000000 /* waitcount3 */ 540 #define CHIPC_FW_W3_SHIFT 24 541 542 /* When SPROM support present, fields in spromcontrol */ 543 #define CHIPC_SRC_START 0x80000000 544 #define CHIPC_SRC_BUSY 0x80000000 545 #define CHIPC_SRC_OPCODE 0x60000000 546 #define CHIPC_SRC_OP_READ 0x00000000 547 #define CHIPC_SRC_OP_WRITE 0x20000000 548 #define CHIPC_SRC_OP_WRDIS 0x40000000 549 #define CHIPC_SRC_OP_WREN 0x60000000 550 #define CHIPC_SRC_OTPSEL 0x00000010 551 #define CHIPC_SRC_LOCK 0x00000008 552 #define CHIPC_SRC_SIZE_MASK 0x00000006 553 #define CHIPC_SRC_SIZE_1K 0x00000000 554 #define CHIPC_SRC_SIZE_4K 0x00000002 555 #define CHIPC_SRC_SIZE_16K 0x00000004 556 #define CHIPC_SRC_SIZE_SHIFT 1 557 #define CHIPC_SRC_PRESENT 0x00000001 558 559 /* gpiotimerval */ 560 #define CHIPC_GPIO_ONTIME_SHIFT 16 561 562 /* clockcontrol_n */ 563 #define CHIPC_CN_N1_MASK 0x3f /* n1 control */ 564 #define CHIPC_CN_N1_SHIFT 0 565 #define CHIPC_CN_N2_MASK 0x3f00 /* n2 control */ 566 #define CHIPC_CN_N2_SHIFT 8 567 #define CHIPC_CN_PLLC_MASK 0xf0000 /* pll control */ 568 #define CHIPC_CN_PLLC_SHIFT 16 569 570 /* clockcontrol_sb/pci/uart */ 571 #define CHIPC_M1_MASK 0x3f /* m1 control */ 572 #define CHIPC_M1_SHIFT 0 573 #define CHIPC_M2_MASK 0x3f00 /* m2 control */ 574 #define CHIPC_M2_SHIFT 8 575 #define CHIPC_M3_MASK 0x3f0000 /* m3 control */ 576 #define CHIPC_M3_SHIFT 16 577 #define CHIPC_MC_MASK 0x1f000000 /* mux control */ 578 #define CHIPC_MC_SHIFT 24 579 580 /* N3M Clock control magic field values */ 581 #define CHIPC_F6_2 0x02 /* A factor of 2 in */ 582 #define CHIPC_F6_3 0x03 /* 6-bit fields like */ 583 #define CHIPC_F6_4 0x05 /* N1, M1 or M3 */ 584 #define CHIPC_F6_5 0x09 585 #define CHIPC_F6_6 0x11 586 #define CHIPC_F6_7 0x21 587 588 #define CHIPC_F5_BIAS 5 /* 5-bit fields get this added */ 589 590 #define CHIPC_MC_BYPASS 0x08 591 #define CHIPC_MC_M1 0x04 592 #define CHIPC_MC_M1M2 0x02 593 #define CHIPC_MC_M1M2M3 0x01 594 #define CHIPC_MC_M1M3 0x11 595 596 /* Type 2 Clock control magic field values */ 597 #define CHIPC_T2_BIAS 2 /* n1, n2, m1 & m3 bias */ 598 #define CHIPC_T2M2_BIAS 3 /* m2 bias */ 599 600 #define CHIPC_T2MC_M1BYP 1 601 #define CHIPC_T2MC_M2BYP 2 602 #define CHIPC_T2MC_M3BYP 4 603 604 /* Type 6 Clock control magic field values */ 605 #define CHIPC_T6_MMASK 1 /* bits of interest in m */ 606 #define CHIPC_T6_M0 120000000 /* sb clock for m = 0 */ 607 #define CHIPC_T6_M1 100000000 /* sb clock for m = 1 */ 608 #define CHIPC_SB2MIPS_T6(sb) (2 * (sb)) 609 610 /* Common clock base */ 611 #define CHIPC_CLOCK_BASE1 24000000 /* Half the clock freq */ 612 #define CHIPC_CLOCK_BASE2 12500000 /* Alternate crystal on some PLLs */ 613 614 /* Clock control values for 200MHz in 5350 */ 615 #define CHIPC_CLKC_5350_N 0x0311 616 #define CHIPC_CLKC_5350_M 0x04020009 617 618 /* Bits in the ExtBus config registers */ 619 #define CHIPC_CFG_EN 0x0001 /* Enable */ 620 #define CHIPC_CFG_EM_MASK 0x000e /* Extif Mode */ 621 #define CHIPC_CFG_EM_ASYNC 0x0000 /* Async/Parallel flash */ 622 #define CHIPC_CFG_EM_SYNC 0x0002 /* Synchronous */ 623 #define CHIPC_CFG_EM_PCMCIA 0x0004 /* PCMCIA */ 624 #define CHIPC_CFG_EM_IDE 0x0006 /* IDE */ 625 #define CHIPC_FLASH_CFG_DS 0x0010 /* Data size, 0=8bit, 1=16bit */ 626 #define CHIPC_FLASH_CFG_CD_MASK 0x00e0 /* Sync: Clock divisor, rev >= 20 */ 627 #define CHIPC_FLASH_CFG_CE 0x0100 /* Sync: Clock enable, rev >= 20 */ 628 #define CHIPC_FLASH_CFG_SB 0x0200 /* Sync: Size/Bytestrobe, rev >= 20 */ 629 #define CHIPC_FLASH_CFG_IS 0x0400 /* Extif Sync Clk Select, rev >= 20 */ 630 631 /* ExtBus address space */ 632 #define CHIPC_EB_BASE 0x1a000000 /* Chipc ExtBus base address */ 633 #define CHIPC_EB_PCMCIA_MEM 0x1a000000 /* PCMCIA 0 memory base address */ 634 #define CHIPC_EB_PCMCIA_IO 0x1a200000 /* PCMCIA 0 I/O base address */ 635 #define CHIPC_EB_PCMCIA_CFG 0x1a400000 /* PCMCIA 0 config base address */ 636 #define CHIPC_EB_IDE 0x1a800000 /* IDE memory base */ 637 #define CHIPC_EB_PCMCIA1_MEM 0x1a800000 /* PCMCIA 1 memory base address */ 638 #define CHIPC_EB_PCMCIA1_IO 0x1aa00000 /* PCMCIA 1 I/O base address */ 639 #define CHIPC_EB_PCMCIA1_CFG 0x1ac00000 /* PCMCIA 1 config base address */ 640 #define CHIPC_EB_PROGIF 0x1b000000 /* ProgIF Async/Sync base address */ 641 642 /* Start/busy bit in flashcontrol */ 643 #define CHIPC_SFLASH_OPCODE 0x000000ff 644 #define CHIPC_SFLASH_ACTION 0x00000700 645 #define CHIPC_SFLASH_CS_ACTIVE 0x00001000 /* Chip Select Active, rev >= 20 */ 646 #define CHIPC_SFLASH_START 0x80000000 647 #define CHIPC_SFLASH_BUSY SFLASH_START 648 649 /* flashcontrol action codes */ 650 #define CHIPC_SFLASH_ACT_OPONLY 0x0000 /* Issue opcode only */ 651 #define CHIPC_SFLASH_ACT_OP1D 0x0100 /* opcode + 1 data byte */ 652 #define CHIPC_SFLASH_ACT_OP3A 0x0200 /* opcode + 3 addr bytes */ 653 #define CHIPC_SFLASH_ACT_OP3A1D 0x0300 /* opcode + 3 addr & 1 data bytes */ 654 #define CHIPC_SFLASH_ACT_OP3A4D 0x0400 /* opcode + 3 addr & 4 data bytes */ 655 #define CHIPC_SFLASH_ACT_OP3A4X4D 0x0500 /* opcode + 3 addr, 4 don't care & 4 data bytes */ 656 #define CHIPC_SFLASH_ACT_OP3A1X4D 0x0700 /* opcode + 3 addr, 1 don't care & 4 data bytes */ 657 658 /* flashcontrol action+opcodes for ST flashes */ 659 #define CHIPC_SFLASH_ST_WREN 0x0006 /* Write Enable */ 660 #define CHIPC_SFLASH_ST_WRDIS 0x0004 /* Write Disable */ 661 #define CHIPC_SFLASH_ST_RDSR 0x0105 /* Read Status Register */ 662 #define CHIPC_SFLASH_ST_WRSR 0x0101 /* Write Status Register */ 663 #define CHIPC_SFLASH_ST_READ 0x0303 /* Read Data Bytes */ 664 #define CHIPC_SFLASH_ST_PP 0x0302 /* Page Program */ 665 #define CHIPC_SFLASH_ST_SE 0x02d8 /* Sector Erase */ 666 #define CHIPC_SFLASH_ST_BE 0x00c7 /* Bulk Erase */ 667 #define CHIPC_SFLASH_ST_DP 0x00b9 /* Deep Power-down */ 668 #define CHIPC_SFLASH_ST_RES 0x03ab /* Read Electronic Signature */ 669 #define CHIPC_SFLASH_ST_CSA 0x1000 /* Keep chip select asserted */ 670 #define CHIPC_SFLASH_ST_SSE 0x0220 /* Sub-sector Erase */ 671 672 /* Status register bits for ST flashes */ 673 #define CHIPC_SFLASH_ST_WIP 0x01 /* Write In Progress */ 674 #define CHIPC_SFLASH_ST_WEL 0x02 /* Write Enable Latch */ 675 #define CHIPC_SFLASH_ST_BP_MASK 0x1c /* Block Protect */ 676 #define CHIPC_SFLASH_ST_BP_SHIFT 2 677 #define CHIPC_SFLASH_ST_SRWD 0x80 /* Status Register Write Disable */ 678 679 /* flashcontrol action+opcodes for Atmel flashes */ 680 #define CHIPC_SFLASH_AT_READ 0x07e8 681 #define CHIPC_SFLASH_AT_PAGE_READ 0x07d2 682 #define CHIPC_SFLASH_AT_BUF1_READ 683 #define CHIPC_SFLASH_AT_BUF2_READ 684 #define CHIPC_SFLASH_AT_STATUS 0x01d7 685 #define CHIPC_SFLASH_AT_BUF1_WRITE 0x0384 686 #define CHIPC_SFLASH_AT_BUF2_WRITE 0x0387 687 #define CHIPC_SFLASH_AT_BUF1_ERASE_PROGRAM 0x0283 688 #define CHIPC_SFLASH_AT_BUF2_ERASE_PROGRAM 0x0286 689 #define CHIPC_SFLASH_AT_BUF1_PROGRAM 0x0288 690 #define CHIPC_SFLASH_AT_BUF2_PROGRAM 0x0289 691 #define CHIPC_SFLASH_AT_PAGE_ERASE 0x0281 692 #define CHIPC_SFLASH_AT_BLOCK_ERASE 0x0250 693 #define CHIPC_SFLASH_AT_BUF1_WRITE_ERASE_PROGRAM 0x0382 694 #define CHIPC_SFLASH_AT_BUF2_WRITE_ERASE_PROGRAM 0x0385 695 #define CHIPC_SFLASH_AT_BUF1_LOAD 0x0253 696 #define CHIPC_SFLASH_AT_BUF2_LOAD 0x0255 697 #define CHIPC_SFLASH_AT_BUF1_COMPARE 0x0260 698 #define CHIPC_SFLASH_AT_BUF2_COMPARE 0x0261 699 #define CHIPC_SFLASH_AT_BUF1_REPROGRAM 0x0258 700 #define CHIPC_SFLASH_AT_BUF2_REPROGRAM 0x0259 701 702 /* Status register bits for Atmel flashes */ 703 #define CHIPC_SFLASH_AT_READY 0x80 704 #define CHIPC_SFLASH_AT_MISMATCH 0x40 705 #define CHIPC_SFLASH_AT_ID_MASK 0x38 706 #define CHIPC_SFLASH_AT_ID_SHIFT 3 707 708 /* 709 * These are the UART port assignments, expressed as offsets from the base 710 * register. These assignments should hold for any serial port based on 711 * a 8250, 16450, or 16550(A). 712 */ 713 714 #define CHIPC_UART_RX 0 /* In: Receive buffer (DLAB=0) */ 715 #define CHIPC_UART_TX 0 /* Out: Transmit buffer (DLAB=0) */ 716 #define CHIPC_UART_DLL 0 /* Out: Divisor Latch Low (DLAB=1) */ 717 #define CHIPC_UART_IER 1 /* In/Out: Interrupt Enable Register (DLAB=0) */ 718 #define CHIPC_UART_DLM 1 /* Out: Divisor Latch High (DLAB=1) */ 719 #define CHIPC_UART_IIR 2 /* In: Interrupt Identity Register */ 720 #define CHIPC_UART_FCR 2 /* Out: FIFO Control Register */ 721 #define CHIPC_UART_LCR 3 /* Out: Line Control Register */ 722 #define CHIPC_UART_MCR 4 /* Out: Modem Control Register */ 723 #define CHIPC_UART_LSR 5 /* In: Line Status Register */ 724 #define CHIPC_UART_MSR 6 /* In: Modem Status Register */ 725 #define CHIPC_UART_SCR 7 /* I/O: Scratch Register */ 726 #define CHIPC_UART_LCR_DLAB 0x80 /* Divisor latch access bit */ 727 #define CHIPC_UART_LCR_WLEN8 0x03 /* Word length: 8 bits */ 728 #define CHIPC_UART_MCR_OUT2 0x08 /* MCR GPIO out 2 */ 729 #define CHIPC_UART_MCR_LOOP 0x10 /* Enable loopback test mode */ 730 #define CHIPC_UART_LSR_RX_FIFO 0x80 /* Receive FIFO error */ 731 #define CHIPC_UART_LSR_TDHR 0x40 /* Data-hold-register empty */ 732 #define CHIPC_UART_LSR_THRE 0x20 /* Transmit-hold-register empty */ 733 #define CHIPC_UART_LSR_BREAK 0x10 /* Break interrupt */ 734 #define CHIPC_UART_LSR_FRAMING 0x08 /* Framing error */ 735 #define CHIPC_UART_LSR_PARITY 0x04 /* Parity error */ 736 #define CHIPC_UART_LSR_OVERRUN 0x02 /* Overrun error */ 737 #define CHIPC_UART_LSR_RXRDY 0x01 /* Receiver ready */ 738 #define CHIPC_UART_FCR_FIFO_ENABLE 1 /* FIFO control register bit controlling FIFO enable/disable */ 739 740 /* Interrupt Identity Register (IIR) bits */ 741 #define CHIPC_UART_IIR_FIFO_MASK 0xc0 /* IIR FIFO disable/enabled mask */ 742 #define CHIPC_UART_IIR_INT_MASK 0xf /* IIR interrupt ID source */ 743 #define CHIPC_UART_IIR_MDM_CHG 0x0 /* Modem status changed */ 744 #define CHIPC_UART_IIR_NOINT 0x1 /* No interrupt pending */ 745 #define CHIPC_UART_IIR_THRE 0x2 /* THR empty */ 746 #define CHIPC_UART_IIR_RCVD_DATA 0x4 /* Received data available */ 747 #define CHIPC_UART_IIR_RCVR_STATUS 0x6 /* Receiver status */ 748 #define CHIPC_UART_IIR_CHAR_TIME 0xc /* Character time */ 749 750 /* Interrupt Enable Register (IER) bits */ 751 #define CHIPC_UART_IER_EDSSI 8 /* enable modem status interrupt */ 752 #define CHIPC_UART_IER_ELSI 4 /* enable receiver line status interrupt */ 753 #define CHIPC_UART_IER_ETBEI 2 /* enable transmitter holding register empty interrupt */ 754 #define CHIPC_UART_IER_ERBFI 1 /* enable data available interrupt */ 755 756 /* 4325 chip-specific ChipStatus register bits */ 757 #define CHIPC_CST4325_SPROM_OTP_SEL_MASK CHIPC_CST_SPROM_OTP_SEL_R22_MASK 758 #define CHIPC_CST4325_SPROM_OTP_SEL_SHIFT CHIPC_CST_SPROM_OTP_SEL_R22_SHIFT 759 #define CHIPC_CST4325_SDIO_USB_MODE_MASK 0x00000004 760 #define CHIPC_CST4325_SDIO_USB_MODE_SHIFT 2 761 #define CHIPC_CST4325_RCAL_VALID_MASK 0x00000008 762 #define CHIPC_CST4325_RCAL_VALID_SHIFT 3 763 #define CHIPC_CST4325_RCAL_VALUE_MASK 0x000001f0 764 #define CHIPC_CST4325_RCAL_VALUE_SHIFT 4 765 #define CHIPC_CST4325_PMUTOP_2B_MASK 0x00000200 /* 1 for 2b, 0 for to 2a */ 766 #define CHIPC_CST4325_PMUTOP_2B_SHIFT 9 767 768 /* 4329 chip-specific ChipStatus register bits */ 769 #define CHIPC_CST4329_SPROM_OTP_SEL_MASK CHIPC_CST_SPROM_OTP_SEL_R22_MASK 770 #define CHIPC_CST4329_SPROM_OTP_SEL_SHIFT CHIPC_CST_SPROM_OTP_SEL_R22_SHIFT 771 #define CHIPC_CST4329_SPI_SDIO_MODE_MASK 0x00000004 772 #define CHIPC_CST4329_SPI_SDIO_MODE_SHIFT 2 773 774 /* 4312 chip-specific ChipStatus register bits */ 775 #define CHIPC_CST4312_SPROM_OTP_SEL_MASK CHIPC_CST_SPROM_OTP_SEL_R22_MASK 776 #define CHIPC_CST4312_SPROM_OTP_SEL_SHIFT CHIPC_CST_SPROM_OTP_SEL_R22_SHIFT 777 778 779 /* 4322 chip-specific ChipStatus register bits */ 780 #define CHIPC_CST4322_XTAL_FREQ_20_40MHZ 0x00000020 781 #define CHIPC_CST4322_SPROM_OTP_SEL_MASK CHIPC_CST_SPROM_OTP_SEL_R23_MASK 782 #define CHIPC_CST4322_SPROM_OTP_SEL_SHIFT CHIPC_CST_SPROM_OTP_SEL_R23_SHIFT 783 #define CHIPC_CST4322_PCI_OR_USB 0x00000100 784 #define CHIPC_CST4322_BOOT_MASK 0x00000600 785 #define CHIPC_CST4322_BOOT_SHIFT 9 786 #define CHIPC_CST4322_BOOT_FROM_SRAM 0 /* boot from SRAM, ARM in reset */ 787 #define CHIPC_CST4322_BOOT_FROM_ROM 1 /* boot from ROM */ 788 #define CHIPC_CST4322_BOOT_FROM_FLASH 2 /* boot from FLASH */ 789 #define CHIPC_CST4322_BOOT_FROM_INVALID 3 790 #define CHIPC_CST4322_ILP_DIV_EN 0x00000800 791 #define CHIPC_CST4322_FLASH_TYPE_MASK 0x00001000 792 #define CHIPC_CST4322_FLASH_TYPE_SHIFT 12 793 #define CHIPC_CST4322_FLASH_TYPE_SHIFT_ST 0 /* ST serial FLASH */ 794 #define CHIPC_CST4322_FLASH_TYPE_SHIFT_ATMEL 1 /* ATMEL flash */ 795 #define CHIPC_CST4322_ARM_TAP_SEL 0x00002000 796 #define CHIPC_CST4322_RES_INIT_MODE_MASK 0x0000c000 797 #define CHIPC_CST4322_RES_INIT_MODE_SHIFT 14 798 #define CHIPC_CST4322_RES_INIT_MODE_ILPAVAIL 0 /* resinitmode: ILP available */ 799 #define CHIPC_CST4322_RES_INIT_MODE_ILPREQ 1 /* resinitmode: ILP request */ 800 #define CHIPC_CST4322_RES_INIT_MODE_ALPAVAIL 2 /* resinitmode: ALP available */ 801 #define CHIPC_CST4322_RES_INIT_MODE_HTAVAIL 3 /* resinitmode: HT available */ 802 #define CHIPC_CST4322_PCIPLLCLK_GATING 0x00010000 803 #define CHIPC_CST4322_CLK_SWITCH_PCI_TO_ALP 0x00020000 804 #define CHIPC_CST4322_PCI_CARDBUS_MODE 0x00040000 805 806 /* 43236 Chip specific ChipStatus register bits */ 807 #define CHIPC_CST43236_SFLASH_MASK 0x00000040 808 #define CHIPC_CST43236_OTP_SEL_MASK 0x00000080 809 #define CHIPC_CST43236_OTP_SEL_SHIFT 7 810 #define CHIPC_CST43236_HSIC_MASK 0x00000100 /* USB/HSIC */ 811 #define CHIPC_CST43236_BP_CLK 0x00000200 /* 120/96Mbps */ 812 #define CHIPC_CST43236_BOOT_MASK 0x00001800 813 #define CHIPC_CST43236_BOOT_SHIFT 11 814 #define CHIPC_CST43236_BOOT_FROM_SRAM 0 /* boot from SRAM, ARM in reset */ 815 #define CHIPC_CST43236_BOOT_FROM_ROM 1 /* boot from ROM */ 816 #define CHIPC_CST43236_BOOT_FROM_FLASH 2 /* boot from FLASH */ 817 #define CHIPC_CST43236_BOOT_FROM_INVALID 3 818 819 /* 43237 Chip specific ChipStatus register bits */ 820 #define CHIPC_CST43237_BP_CLK 0x00000200 /* 96/80Mbps */ 821 822 /* 4331 Chip specific ChipStatus register bits */ 823 #define CHIPC_CST4331_XTAL_FREQ 0x00000001 /* crystal frequency 20/40Mhz */ 824 #define CHIPC_CST4331_SPROM_PRESENT 0x00000002 825 #define CHIPC_CST4331_OTP_PRESENT 0x00000004 826 #define CHIPC_CST4331_LDO_RF 0x00000008 827 #define CHIPC_CST4331_LDO_PAR 0x00000010 828 829 /* 4331 chip-specific CHIPCTRL register bits */ 830 #define CHIPC_CCTRL4331_BT_COEXIST (1<<0) /* 0 disable */ 831 #define CHIPC_CCTRL4331_SECI (1<<1) /* 0 SECI is disabled (JATG functional) */ 832 #define CHIPC_CCTRL4331_EXT_LNA (1<<2) /* 0 disable */ 833 #define CHIPC_CCTRL4331_SPROM_GPIO13_15 (1<<3) /* sprom/gpio13-15 mux */ 834 #define CHIPC_CCTRL4331_EXTPA_EN (1<<4) /* 0 ext pa disable, 1 ext pa enabled */ 835 #define CHIPC_CCTRL4331_GPIOCLK_ON_SPROMCS (1<<5) /* set drive out GPIO_CLK on sprom_cs pin */ 836 #define CHIPC_CCTRL4331_PCIE_MDIO_ON_SPROMCS (1<<6) /* use sprom_cs pin as PCIE mdio interface */ 837 #define CHIPC_CCTRL4331_EXTPA_ON_GPIO2_5 (1<<7) /* aband extpa will be at gpio2/5 and sprom_dout */ 838 #define CHIPC_CCTRL4331_OVR_PIPEAUXCLKEN (1<<8) /* override core control on pipe_AuxClkEnable */ 839 #define CHIPC_CCTRL4331_OVR_PIPEAUXPWRDOWN (1<<9) /* override core control on pipe_AuxPowerDown */ 840 #define CHIPC_CCTRL4331_PCIE_AUXCLKEN (1<<10) /* pcie_auxclkenable */ 841 #define CHIPC_CCTRL4331_PCIE_PIPE_PLLDOWN (1<<11) /* pcie_pipe_pllpowerdown */ 842 #define CHIPC_CCTRL4331_EXTPA_EN2 (1<<12) /* 0 ext pa2 disable, 1 ext pa2 enabled */ 843 #define CHIPC_CCTRL4331_BT_SHD0_ON_GPIO4 (1<<16) /* enable bt_shd0 at gpio4 */ 844 #define CHIPC_CCTRL4331_BT_SHD1_ON_GPIO5 (1<<17) /* enable bt_shd1 at gpio5 */ 845 846 /* 4315 chip-specific ChipStatus register bits */ 847 #define CHIPC_CST4315_SPROM_OTP_SEL_MASK CHIPC_CST_SPROM_OTP_SEL_R22_MASK 848 #define CHIPC_CST4315_SPROM_OTP_SEL_SHIFT CHIPC_CST_SPROM_OTP_SEL_R22_SHIFT 849 #define CHIPC_CST4315_SDIO_MODE 0x00000004 /* gpio [8], sdio/usb mode */ 850 #define CHIPC_CST4315_RCAL_VALID 0x00000008 851 #define CHIPC_CST4315_RCAL_VALUE_MASK 0x000001f0 852 #define CHIPC_CST4315_RCAL_VALUE_SHIFT 4 853 #define CHIPC_CST4315_PALDO_EXTPNP 0x00000200 /* PALDO is configured with external PNP */ 854 #define CHIPC_CST4315_CBUCK_MODE_MASK 0x00000c00 855 #define CHIPC_CST4315_CBUCK_MODE_BURST 0x00000400 856 #define CHIPC_CST4315_CBUCK_MODE_LPBURST 0x00000c00 857 858 /* 4319 chip-specific ChipStatus register bits */ 859 #define CHIPC_CST4319_SPI_CPULESSUSB 0x00000001 860 #define CHIPC_CST4319_SPI_CLK_POL 0x00000002 861 #define CHIPC_CST4319_SPI_CLK_PH 0x00000008 862 #define CHIPC_CST4319_SPROM_OTP_SEL_MASK CHIPC_CST_SPROM_OTP_SEL_R23_MASK /* gpio [7:6], SDIO CIS selection */ 863 #define CHIPC_CST4319_SPROM_OTP_SEL_SHIFT CHIPC_CST_SPROM_OTP_SEL_R23_SHIFT 864 #define CHIPC_CST4319_SDIO_USB_MODE 0x00000100 /* gpio [8], sdio/usb mode */ 865 #define CHIPC_CST4319_REMAP_SEL_MASK 0x00000600 866 #define CHIPC_CST4319_ILPDIV_EN 0x00000800 867 #define CHIPC_CST4319_XTAL_PD_POL 0x00001000 868 #define CHIPC_CST4319_LPO_SEL 0x00002000 869 #define CHIPC_CST4319_RES_INIT_MODE 0x0000c000 870 #define CHIPC_CST4319_PALDO_EXTPNP 0x00010000 /* PALDO is configured with external PNP */ 871 #define CHIPC_CST4319_CBUCK_MODE_MASK 0x00060000 872 #define CHIPC_CST4319_CBUCK_MODE_BURST 0x00020000 873 #define CHIPC_CST4319_CBUCK_MODE_LPBURST 0x00060000 874 #define CHIPC_CST4319_RCAL_VALID 0x01000000 875 #define CHIPC_CST4319_RCAL_VALUE_MASK 0x3e000000 876 #define CHIPC_CST4319_RCAL_VALUE_SHIFT 25 877 878 /* 4336 chip-specific ChipStatus register bits */ 879 #define CHIPC_CST4336_SPI_MODE_MASK 0x00000001 880 #define CHIPC_CST4336_SPROM_PRESENT 0x00000002 881 #define CHIPC_CST4336_OTP_PRESENT 0x00000004 882 #define CHIPC_CST4336_ARMREMAP_0 0x00000008 883 #define CHIPC_CST4336_ILPDIV_EN_MASK 0x00000010 884 #define CHIPC_CST4336_ILPDIV_EN_SHIFT 4 885 #define CHIPC_CST4336_XTAL_PD_POL_MASK 0x00000020 886 #define CHIPC_CST4336_XTAL_PD_POL_SHIFT 5 887 #define CHIPC_CST4336_LPO_SEL_MASK 0x00000040 888 #define CHIPC_CST4336_LPO_SEL_SHIFT 6 889 #define CHIPC_CST4336_RES_INIT_MODE_MASK 0x00000180 890 #define CHIPC_CST4336_RES_INIT_MODE_SHIFT 7 891 #define CHIPC_CST4336_CBUCK_MODE_MASK 0x00000600 892 #define CHIPC_CST4336_CBUCK_MODE_SHIFT 9 893 894 /* 4330 chip-specific ChipStatus register bits */ 895 #define CHIPC_CST4330_CHIPMODE_SDIOD(cs) (((cs) & 0x7) < 6) /* SDIO || gSPI */ 896 #define CHIPC_CST4330_CHIPMODE_USB20D(cs) (((cs) & 0x7) >= 6) /* USB || USBDA */ 897 #define CHIPC_CST4330_CHIPMODE_SDIO(cs) (((cs) & 0x4) == 0) /* SDIO */ 898 #define CHIPC_CST4330_CHIPMODE_GSPI(cs) (((cs) & 0x6) == 4) /* gSPI */ 899 #define CHIPC_CST4330_CHIPMODE_USB(cs) (((cs) & 0x7) == 6) /* USB packet-oriented */ 900 #define CHIPC_CST4330_CHIPMODE_USBDA(cs) (((cs) & 0x7) == 7) /* USB Direct Access */ 901 #define CHIPC_CST4330_OTP_PRESENT 0x00000010 902 #define CHIPC_CST4330_LPO_AUTODET_EN 0x00000020 903 #define CHIPC_CST4330_ARMREMAP_0 0x00000040 904 #define CHIPC_CST4330_SPROM_PRESENT 0x00000080 /* takes priority over OTP if both set */ 905 #define CHIPC_CST4330_ILPDIV_EN 0x00000100 906 #define CHIPC_CST4330_LPO_SEL 0x00000200 907 #define CHIPC_CST4330_RES_INIT_MODE_SHIFT 10 908 #define CHIPC_CST4330_RES_INIT_MODE_MASK 0x00000c00 909 #define CHIPC_CST4330_CBUCK_MODE_SHIFT 12 910 #define CHIPC_CST4330_CBUCK_MODE_MASK 0x00003000 911 #define CHIPC_CST4330_CBUCK_POWER_OK 0x00004000 912 #define CHIPC_CST4330_BB_PLL_LOCKED 0x00008000 913 #define CHIPC_SOCDEVRAM_4330_BP_ADDR 0x1E000000 914 #define CHIPC_SOCDEVRAM_4330_ARM_ADDR 0x00800000 915 916 /* 4313 chip-specific ChipStatus register bits */ 917 #define CHIPC_CST4313_SPROM_PRESENT 1 918 #define CHIPC_CST4313_OTP_PRESENT 2 919 #define CHIPC_CST4313_SPROM_OTP_SEL_MASK 0x00000002 920 #define CHIPC_CST4313_SPROM_OTP_SEL_SHIFT 0 921 922 /* 43228 chipstatus reg bits */ 923 #define CHIPC_CST43228_ILP_DIV_EN 0x1 924 #define CHIPC_CST43228_OTP_PRESENT 0x2 925 #define CHIPC_CST43228_SERDES_REFCLK_PADSEL 0x4 926 #define CHIPC_CST43228_SDIO_MODE 0x8 927 928 #define CHIPC_CST43228_SDIO_OTP_PRESENT 0x10 929 #define CHIPC_CST43228_SDIO_RESET 0x20 930 931 /* 932 * Register eci_inputlo bitfield values. 933 * - BT packet type information bits [7:0] 934 */ 935 /* [3:0] - Task (link) type */ 936 #define CHIPC_BT_ACL 0x00 937 #define CHIPC_BT_SCO 0x01 938 #define CHIPC_BT_eSCO 0x02 939 #define CHIPC_BT_A2DP 0x03 940 #define CHIPC_BT_SNIFF 0x04 941 #define CHIPC_BT_PAGE_SCAN 0x05 942 #define CHIPC_BT_INQUIRY_SCAN 0x06 943 #define CHIPC_BT_PAGE 0x07 944 #define CHIPC_BT_INQUIRY 0x08 945 #define CHIPC_BT_MSS 0x09 946 #define CHIPC_BT_PARK 0x0a 947 #define CHIPC_BT_RSSISCAN 0x0b 948 #define CHIPC_BT_MD_ACL 0x0c 949 #define CHIPC_BT_MD_eSCO 0x0d 950 #define CHIPC_BT_SCAN_WITH_SCO_LINK 0x0e 951 #define CHIPC_BT_SCAN_WITHOUT_SCO_LINK 0x0f 952 /* [7:4] = packet duration code */ 953 /* [8] - Master / Slave */ 954 #define CHIPC_BT_MASTER 0 955 #define CHIPC_BT_SLAVE 1 956 /* [11:9] - multi-level priority */ 957 #define CHIPC_BT_LOWEST_PRIO 0x0 958 #define CHIPC_BT_HIGHEST_PRIO 0x3 959 960 #endif /* _BHND_CORES_CHIPC_CHIPCREG_H_ */ 961